Own house is the most valuable property of every person. Regardless of whether it is bought, or it is your own project, new ideas appear over time, overhaul. It happens that the renovation project includes the installation of a fireplace.

A house with a fireplace gives a more comfortable perception of life, since a living flame has been identified by a person with prosperity since the Stone Age. Certainly, it is easier to fold the portal during the implementation of a house project from scratch. In this case, the portal project can be implemented with optimal layout rooms according to its location.

Fireplace design

Regardless of the stage at which the portal is being built, its the project has common features:

• The portal should rest only on its own foundation, that is, on the ground, and not on the floor, especially the wooden one.
• The area of ​​the fireplace insert window should be 0.02 of the area of ​​the room for which the portal will be folded.
• The ratio of height to width at the window of the fireplace insert, as well as the depth of the fireplace insert to the height of the window should be 0.67;
• For other dimensions, check the table:

How and in what house to install

If a brick or wooden house is just being built, and it is possible to include a portal in its project, you should choose such a layout so that the fireplace chimney is arranged in the wall between the rooms.

Wherein:

• The back wall of the firebox in such a fireplace is best made of cast iron. This will allow you to get more heat from the fireplace.
• Between brickwork pipes and wooden structures needs to be installed at home steel sheets 2 - 3 mm thick.
• A gap of 20-25 mm must be left between the steel sheet and the brick of the pipe.,.

If the portal is installed in an already built brick house, it is best to disassemble a part of the wall adjacent to the rooms and make a fireplace pipe in it as described above.

If the wall cannot be dismantled, the fireplace is best placed against the north wall of the room. Wherein necessary:

• At a distance of half a brick from the edge of the contour inside it, drive in steel pins with a step into the brick along the entire contour.
• Make the laying of the fireplace so that the masonry brick lays on the pin at the wall.

Read also: Facing the stove and fireplace with fireclay tiles

If the portal is installed in an already built wooden house, it is also best to place it against the north wall of the room.

Wherein necessary:

• In accordance with the design of the fireplace, draw the contours of the portal and chimney on the wall.
• At a distance of half a brick from the edge of the contour inside it from the floor to the ceiling for the chimney and for the portal along the height of the portal, fasten rectangular pipes with a side of 20 - 25 mm to the wall of the room with strong screws. You will need two pipes for the chimney and four pipes for the portal.
• Two pipes are located inside the contour at a distance of half a brick from the edge of the contour, two - outside the contour, each at a distance of one meter from the inner one relative to the pipe contour, respectively.
• Pins must be pre-welded to rectangular pipes.
• Steel sheets 2–3 mm thick are fastened to the pipes with a threaded connection. The gap between the sheet and the wall must be filled with thermal insulation.
• It is necessary to make the masonry of the portal so that the brick of the masonry lies on the pin at the wall.

What to do

To make a fireplace you will need:

• lumber- beam, board. Lumber is needed for the manufacture of auxiliary structures in the course of work.
• Fireplace accessories- grate, gate valve, doors.
• knitting wire. Used as an auxiliary fastener.
• fasteners- self-tapping screws, nails.
• Steel sheet. Used as part of thermal insulation.
• Steel Rectangular Pipe.
• Steel corner. Used in bricklaying.
• Mineral wool. Used in the composition

What could be more comfortable than Vacation home with a fireplace? The fireplace creates a unique atmosphere home comfort and tranquility, makes the interior of the house refined and original. In addition, the fireplace will additional element heat supply. Just imagine how joyful it is to sit in the evening in front of the fireplace with a bright warm fire in the company of your closest people! Or how nice it is to retire with a book or a cup of tea after a hard day.

Designing a house with a fireplace

In the MariSrub catalog you will find a wide selection wooden houses with a fireplace. Ready-made standard projects with two and one floor, with an attic, with a different number of rooms and premises are available. By the way, the fireplace can be placed not only inside the house, but also on attached terrace or veranda. V this case you can equip a summer kitchen.

To your favorite ready-made version the architect will make the necessary changes or create individual design at the request of the customer! When creating a project, building codes are taken into account and fire safety, further communication, requirements for planning, appearance and functional purpose premises.

During construction, keep in mind that the fireplace cannot fully replace heating system, however, it will become an additional heating device in the house. Choose wood-burning types, not electric ones. Only they can create the right atmosphere and give extra warmth. A wood-burning fireplace will warm and cheer you up on a cold winter or rainy autumn evening.

Building a fireplace requires certain knowledge and skills, as it is important to properly lay out the chimney. Otherwise, the equipment will not be able to work fully, and the smoke will go into the room. To avoid this, contact the professionals! MariSrub craftsmen will not only design a house with a fireplace. They will put up a log house, carry out the finishing and competently lay out the fireplace.

Advantages of wooden houses

Experts recommend building houses from wooden materials, as they are distinguished by 100% environmental friendliness and naturalness. They retain heat for a long time, easy to fit and adjust. Timber is characterized by strength, reliability and durability. The wooden house is fresh and warm, there is always a comfortable atmosphere and a cozy atmosphere.

Light wood does not give a strong load and does not require a heavy expensive foundation. You can save on finishing, because wooden walls they look very aesthetically pleasing and attractive, so they do not need additional coloring and decoration.

The MariSrub company chooses the following materials for construction:

• The rounded log continues the traditional Russian construction and will allow you to build a luxurious cottage. It looks neat and quickly fits due to smooth smooth sides;
• A chopped log preserves the natural properties of wood as much as possible, since a very thin layer is removed during processing. upper layer. The material is processed by hand cutting, so it looks elegant and expensive. From such a log can be built spacious cottage in the best Russian traditions;
• Dry profiled timber has a low price and quick installation. The log house turns out to be neat, practical and functional in the traditions of the European style;
• A double beam represents two bars between which a heater has already been laid. This is a practical and rational option for those who want to save on home decoration.

In the manufacture of each log or bar, the craftsmen of "MariSrub" use only safe technologies, which allows maintaining the environmental friendliness of materials. In the company you can order a house on a turnkey basis and under shrinkage. We offer a full range of services, including design and construction according to the project, installation of the foundation and roof, waterproofing, insulation and protective treatment log house, holding engineering networks and finishing.

Thanks to the invention of new building materials and methods of carrying out work, projects of houses with a fireplace have gained a new breath. The heating systems of private houses have been improving every year for a long time. To date, one of the most optimal solutions aimed at the full heating of the building is the use of centralized gas supply. At the same time, outdated heating structures are used only as auxiliary elements.

Project and layout of a private house with a fireplace

One such device that was used to heat human dwellings in the past is a fireplace. However, even despite their relatively low efficiency, now similar devices are often used in the construction of their own housing.

The use of fireplace heating has long faded into the background, and today such designs are used only to bring a certain style to the room. In addition, the presence of an open flame in it provides certain conditions of comfort. Each of us loves to watch the tongues of fire, which sway monotonously depending on the air currents. This process allows you to fence yourself off from everyday worries and relax, rest morally and emotionally.

Project and interior design of a cottage with a fireplace

That is why in modern construction more and more often there are similar systems, the purpose of which is not to heat the home, but to give it a more comfortable and soft atmosphere. At the same time, the installation of a fireplace in houses equipped with gas heating, has the following advantages:

• special comfort and cosiness of the room is achieved;
• the atmosphere in the house becomes more aesthetic;
• the efficiency of the main heating system is increased due to the presence of an additional source of heating;
• the chosen interior becomes more detailed and homely.

The above factors once again emphasize the fact that the use of a fireplace in a private house is still relevant and has many advantages. However, those equipped with fireplace systems require much more careful and detailed study, since the creation of similar buildings is a rather responsible process.

Layout of a house with a fireplace and a garage for two cars

It is no secret to anyone that the source open fire, which is present in the fireplace, requires special care and carrying out some additional operations aimed at preventing its penetration deep into the living room. Based on fire safety requirements, the layout country houses with a fireplace is carried out with great care in such a way as to avoid the slightest possibility of flame spreading into the building.

Read also

Layout and project of a house with 4 bedrooms

Fireplace systems

Creating a fireplace in your own home is a rather complicated and time-consuming process, because, in addition to fire safety, such devices and their construction have a number of features that you need to pay attention to.

Scheme of the heating system at home with a fireplace

In general, the construction of similar devices and all related communications that support their full operation is based on the following principles:

The construction of a fireplace system is a rather laborious and long-term process, containing a lot of nuances and features. The use of such structures, which have only a decorative focus, is an unreasonable luxury that only wealthy segments of the population can afford.

Stove heating in wooden houses

Which are based on the use of fireplace structures or stoves, require a much deeper analysis and elaboration of all the details than objects built using other materials. Similar features of the system are due to the fact that wood is a highly flammable material. Based on this, we can conclude that not only the functionality of the system and its practicality depend on the elaboration of all the nuances, but to the greatest extent security. At the same time, almost every criterion that determines the full operation of the structure is subject to changes.

Houses made of timber are equipped with a special base, laid out of brick or poured with concrete, which can fully withstand the mass of the fireplace system.

In some cases, it is possible to strengthen only the supporting beams, but this solution is hardly optimal.

Project wooden house with fireplace

To ensure protection wooden surface from the high temperatures that form inside the furnace, special films and primers are used, which completely cover all problem areas.

To date, projects of houses made of timber, equipped with a stove or fireplace, are quite rare due to the fact that such buildings, even despite a more thorough study, still represent a significant fire hazard. Another factor that plays an important role in creating a stove in a log house is its placement.


In order to more accurately understand the principle of installing a similar device, you must first consider all possible options arrangement of products that exist in modern construction. To date, the most practical and functional are the following variations of such structures:

• frontal;
• corner;
• separately standing.

At the same time, in wooden houses with a furnace, its location is selected based on several criteria, the main role among which is the presence free space and the possibility of additional processing of wooden surfaces.

Designing a private house with a bath

A prime example wooden building, equipped with a furnace, is . As a rule, it is this object that must meet all the necessary criteria, among which the quality of the reliability of the device and its safety are not the last. Houses, in most cases, have two main heating systems. One of them is the main one and heats the entire living space Houses. In turn, the second one provides heating only for the premises of the bath, to which its work is directed.

As a rule, in projects of houses with a sauna, a frontal or corner method of placing a heating element is used. At the same time, it is located on the wall that is in direct contact with the street and is exposed to temperature. external environment. This arrangement ensures uniform heating of the entire room in as soon as possible.


One of the most important design features inherent in similar buildings is ventilation, because without its proper design it is unlikely that it will be possible to achieve the very atmosphere that is needed in houses with a sauna. A constant supply of oxygen is a necessary factor underlying the process of fuel combustion. With the correct location of all inlet and outlet openings, it will not be difficult to achieve maximum conditions in a house with a sauna.

For each of us, a home is a fortress, a family nest, a place where you are always welcome, where you can return and feel the support of your dear eyes and warmly familiar walls. But, in addition, the house is also a unique image that bears the imprint of all who live in it. It is a reflection of the habits of the owners, their ideas about comfort and aesthetics, speaks of the breadth of their views and the scale of their ambitions.

In order to build exactly your own, in every way perfect home, it is necessary already at the stage of choosing a project (or its individual creation) to imagine what your desires and needs are. They can be very different - from equipping swimming pools and gyms to creative workshops and weapon rooms. But there is one convenience that few can refuse. This is a sauna. Everyone knows about its usefulness for the health of people of all ages without exception. Regular use of the Finnish bath means healthy blood vessels, normalization of weight, strong nerves, and young skin.

Sauna can be designed:

• as an independent separate building (in this case, the risk of fire is reduced, but construction costs increase, since walls will have to be erected, a separate water supply and sewage system must be installed);
• right in a residential building, which will create convenience for the households visiting it, because they do not have to move from one building to another after visiting the steam room.

When installing a sauna in the house, the living quarters adjacent to it can be heated by the air that heats up during its operation.

Collection projects

In the basement

Such a solution is very convenient due to the isolation of the steam room and related premises - a shower room and a bathroom from residential volumes. As a rule, a rest room is placed next door, where you can relax between visits to the high temperature zone and after the end of the bath procedures. Examples include:

• in an economical, despite the dimensions in terms of only 7.5 x 9 m, in the basement, in addition to bath complex two more pantries were arranged - heated and cold;
• where preference is given to the location of the sauna and gym under the house, and for the car a parking lot-canopy was built at the zero mark;
• the volume of the sauna can contain not only a shower, but also a jacuzzi bath, as in a modern cottage

On the first floor

In this category, most of the buildings are one-story. The drawings show that a comfortable living environment in them is created by separating the active and relaxation zones. It is convenient in country houses, where the owners come to take a break from the city noise and relax in nature. These are the projects:

• from a log beam with a pitched roof;
• economical aerated concrete with a covered terrace and a carport;
• guest house with a laconic plan geometry.

Upstairs

Of course, this layout option is possible mainly in large mansions, where the dimensions allow not only to create conditions for comfortable placement of the sauna, but also to make sure that this does not pose a danger to residents. By ensuring proper ventilation, waterproofing and giving preference to finishing natural wood, (which will reduce the risk of fire) it is quite possible to enjoy all the benefits that this wonderful method of washing and healing provides.
Examples include:

• two-story cottage with three bedrooms and a carport;
• - here one of the variations of the second floor project is the arrangement of a sauna there along with a shower room and a bathroom.

If, for some reason, you do not want to place a sauna in the house, it is possible, along with the purchase of the project, to order its project as a separate building. Specialists will consult you and create the necessary drawings.

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to start construction.

The main part of the project is the architectural and design sections. If the customer is sure that there are intelligent specialists in engineering networks in the construction team, then the development of this part of the project in a specialized company can be abandoned. But it is necessary to understand that the architect, designer and engineer are working on the project together and such moments as, for example, strobes and openings in the walls for laying pipes and wires, are provided by them in advance.

The engineering part of the project is divided into several parts

• Water supply and sewerage (VK)

1. water supply scheme
2. sewerage scheme
3. general form systems.

Before proceeding with the design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply gives complete independence from external conditions. But it must be remembered that you will need your own sources of water, and drilling a well will cost a decent amount.

Connecting to a centralized system will require design development in accordance with specifications existing network and obtaining permission to tie.

When connecting a sewer to a centralized system, the procedure is the same as when connecting a water supply: making a request to the relevant services, developing a project, obtaining permission to tie into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

• Heating and ventilation (HV)

1. heating scheme: calculation of the required power of the equipment, distribution schemes for heating mains, location of pipes and radiators
2. ventilation scheme: binding to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, the location of stoves and fireplaces
3. boiler piping (if necessary)
4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric), or connected to centralized networks.

• Power supply (ETR)

1. lighting layout
2. wiring of power networks
3. ASU scheme
4. grounding system
5. detailed description and characteristics of all elements of the system.

Electrical systems can be divided into mandatory and optional. Mandatory include indoor and outdoor lighting, ventilation, air conditioning and electric heating systems. Additional systems include systems such as "Warm floor" or automated gate control.

IMPORTANT

• Each of the parts of the engineering section of the project should contain a general and technical descriptions, specifications of materials and necessary equipment.
• Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.

Price: from 100 rubles. per m²

Package "Engineering networks"

Package "Engineering networks"

The project of engineering networks will allow you to competently lay communications and make the house truly comfortable and modern.

• Price: from 100 rubles. per m²

Making changes to the project

Often the customer is faced with the question: to choose standard project at home and save money, while losing on the originality of future housing, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this implies additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your house looks original.

The following changes can be made to the project of the house:

move wall partitions. But only if they are not carriers. This operation will allow you to change the size and purpose of the rooms.

moving windows and doorways allows you to change the illumination of rooms and organize convenient access to the rooms you need

changing the type of floors and walls will allow you to fully realize your own ideas about economical and rational housing

change ceiling heights. Although all our houses are designed with optimal height rooms 2.8 m, some customers believe that high ceilings are additional coziness and comfort

conversion of the attic into a living space will give you the opportunity to expand your own living space

change the angle of inclination of the roof and canopies is taking into account climatic conditions specific region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or basement

add, remove, change a garage or a terrace, you can, in accordance with your ideas about the functionality of housing

change in the structural composition, construction and finishing materials will allow you to manage your own financial resources economically

a mirror image project will allow you to organically fit the house into the surrounding landscape.

The changes made should not affect the safety of the home.

Too much a large number of changes usually do not improve the project. If you could not choose a suitable house in the catalogs, then it may be worth ordering an individual project from an architect.

Price: from 2000 rubles.

Making changes to the project

Making changes to the project

A house built according to a standard project may look original

• Price: from 2,000 rubles.

Package "Foundation adaptation"

When a typical project of a house is being developed, then some average soil parameters are taken as a basis. But, without having the exact data of the geological expertise, it is difficult to take into account all the nuances in the design. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally laid down in the project. And this means that the foundation - the basis of the whole house - will need to be finalized in order to make it strong and reliable.

To completely eliminate all problems when laying the foundation, the specialists of our company have developed a package "Adaptation of the foundation". When implementing a package, not only specifications but also the wishes of the customer.

This package includes:

• choice of foundation type
• calculation of technical parameters:

Foundation footing depth
- load bearing capacity
- indicators of soil stress under the base of the foundation
- cross-sectional area of ​​the working reinforcement, etc.

• detailed drawings of the zero cycle
• cost sheet for building materials.

Adaptation of the foundation gives a full guarantee of its strength, and hence the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during operation already finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally laid down in the project. And this will help save materials and financial resources.

Price: 14,000 rubles.

Package "Foundation adaptation"

Package "Foundation adaptation"

Carefully prepared foundation project - a strong and reliable home

• Price 14,000 rubles.

Individual design

If you decide to build a house, then you have your own idea of ​​​​what your dream home should be like. And if none of the typical projects suits you, it makes sense to think about individual project. In addition, it will take into account all your wishes as much as possible: the level of comfort, family composition, even the view from the window. It is clear that such a project will cost a lot. But you will know for sure that there is no other like it.
Sometimes, however, you have to resort to individual design forcedly. For example, the developer got a plot of land of a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of work on an individual project:

• development terms of reference for house design
• contract for design work
• preparation of a draft design: linking the building to the terrain, external and internal views, layouts, sections
• detailed study of sections of the project.

In addition, you can also order:

• projects of additional structures - a garage, a workshop, a bathhouse, etc.
• visualization of the project in 3D format.

Ultimately, the customer receives the package project documentation, consisting of architectural and constructive sections.

The project features:

• The general plan of the house with its binding to the boundaries of the site.
• floor plans, which indicate the thickness of walls, lintels and partitions, the area of ​​\u200b\u200bthe premises, the specification of windows and doorways.
• Facade plans with indication of finishing materials and color schemes.
• Sections of the building and main units.
• Drawings and sections of the foundation, bill of materials.
• overlap calculation, truss system roofs, roof insulation and waterproofing units.

You can decide on the style of the future home in the catalog "Individual design".

Price: from 450 rubles. / m²

Individual design

Individual design

Realize your individuality!

• Price: from 450 rubles. / m²

Package "Tender offer"

For any developer, a question from a cheerful nursery rhyme"what does it cost us to build a house ...?" far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate the costs "by eye". Not possessing complete information, it will not work to calculate everything to the smallest detail and, in the end, it will cost itself more. And besides, a careful calculation of the cost of materials and work affects not only your finances, but also the timing of building a house.

You can calculate the construction costs with the utmost accuracy using the "Tender offer" service developed by our specialists. Essentially, this is a document that full list all building materials and works, indicating their volumes.

The presence of a tender offer allows:

• get a real picture of the costs of upcoming construction
• attract construction company which is able to offer the most profitable terms performance of work
• not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
• competently supervise the actions of contractors at all stages of construction

tender offer, supported by information on the cost of materials and construction works- a serious argument for obtaining bank loans.

Package "Tender offer"

Tender offer:

Request a detailed quote. Build for yourself!

• Price 10 500 rubles.

Package "Anti-ice"

Snowdrifts and ice in winter time on the roof of your house cause a lot of trouble. You can, of course, climb onto the roof and wave a shovel in the cold for 2-3 hours - that's business. But it has long been invented and widely used efficient systems snowmelt and anti-icing. Their basis is heating cables. The system is organized on the same principle as the "warm floor". Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the peculiarities of the power supply of the house:

for roofs and gutters: snowmelt in gutters, at the edge of the roof in order to prevent the formation of icicles and frost in the pipes

for entrance group: heating steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used for heating the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum energy consumption is calculated and provided fire safety. When creating the Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overtemperature cut-off device or a differential circuit breaker for automatic shutdown systems when energy losses are detected. If the system is too large, it is divided into smaller sections. This makes it easier to manage her work.

Important:

for a multi-pitched roof, the Anti-Ice system will be designed by specialists of our company on an individual order.

Price: 4500 rubles.

Package "Anti-ice"

Package "Anti-ice"

Your comfort and safety in winter

• Price 3 100 rubles.

Package "Lightning protection"

Often developers do not give of great importance protection of their own homes from lightning: someone saves, someone thinks, someone hopes for "maybe". But 3-4 years after the construction of the house, many people remember about lightning protection. The roofing felts of a neighbor burned down in a thunderstorm Appliances, roofing felts, statistics caught my eye on how many fires occur per year due to lightning.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. It is worth thinking about this, if only for purely aesthetic reasons - there will be no need to once again hollow out the walls of the house and pull the down conductor along the facade, violating the well-thought-out appearance building.

Home lightning protection is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal - protects the electrical network from sudden voltage surges. And special devices protect electrical engineering from sudden changes. electromagnetic field within the radius of a lightning strike.

The package "Lightning protection" includes

• plan-scheme of the location of lightning rods that take on direct lightning strikes
• cross-sectional diagram of a current collector that diverts current from the lightning rod to ground
• ground loop circuit that distributes lightning energy in the soil, ensuring complete safety
• averaged resistance calculations
• detailed list necessary materials
• recommendations for project implementation.

The package "Lightning protection" from the company Dom4M guarantees you the safety of your home even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: think about safety in advance

• Price 3 100 rubles.

Package "Central vacuum cleaner"

"Central vacuum cleaner" is a kind of aspiration system(removal small particles by being sucked into the air stream).

The system consists of:

• a vacuum cleaner(installed in technical room);
• duct system, along which the dust-air mass moves (more often hidden installation is carried out in the preparation of the floor or in the space behind the false ceiling);
• pneumosockets and pneumosows(connects to the first flexible hose with telescopic rod and nozzle, as in conventional vacuum cleaner, the latter are intended for express cleaning, usually in the kitchen).

Pros:

• removable dusty no air gets in back into the room, and is “thrown out” after the unit to the street;
• No noise in clean rooms.
• Ease of cleaning without "pulling" the vacuum cleaner from room to room, without the use of extension cords.
• Concealed installation system, there is nothing in the room except a pneumo-socket.

Project price: from 3100 rubles.

Package "Central vacuum cleaner"

Package "Central vacuum cleaner"

"An integral part of modern home- comfort, cleanliness and Fresh air"

• Project price: from 3,100 rubles.

Package "Comfortable home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable.
modern man v modern house. Most of these amenities are laid down at the design stage. But we are ready to expand their list and help clients make their own housing as comfortable as possible.