Is it possible to finish the walls with laminate? How to use laminate on the wall in the interior of various rooms

Plastic panels- an inexpensive material used for finishing both residential and utility premises. Costs this species wall and ceiling cladding is inexpensive, while decorative qualities are very good. Among other things, the advantages of this material include ease of installation. Installing PVC panels with your own hands will not be difficult for anyone.

What material to choose

Before proceeding with such an operation as do-it-yourself wall mounting, you should decide on the type of material itself. For interior decoration of premises for various purposes, several types of plastic elements can be used from the inside:

PVC lining. This material is outwardly similar to its wooden counterpart - it has a small width and often the corresponding coloring.

Sheet panels. This variety is similar to sheets of decorative plywood.

Ordinary panels in the form of a plastic "board" with a tenon / groove fastening.

When choosing a specific type of material, one should focus primarily on the specifics and design features of a particular room. Plastic lining has the advantage that it does not "weight" the room and gives it to some extent natural look. Sheet panels are usually used for finishing walls and ceilings of rooms. large area. A very good solution, for example, could be sheathing an attic or ground floor country house. Versatility - one of the main advantages of a material such as PVC is just perfect, just like for a bathroom, living rooms, hallway, etc.

The cost of pvc panels

Plastic elements of this variety are not without reason considered budget option finishes. Very low cost is one of the main advantages of such material as PVC panels. The price for them ranges from 200-300 rubles per lamella in the form of a "board". Width of plastic decorative element is usually 25-30 cm. Thus, for the decoration, for example, a wall five meters long will have to spend only about 4-6 thousand rubles. If desired, you can find PVC panels and cheaper - for 100-150 rubles. However, too beautiful original design they are unlikely to be different.

What tools will be needed

Do-it-yourself PVC wall panels are mounted on a special frame. You will need a drill to install it. building level, roulette. The panels themselves usually have to be cut during installation. Therefore, you will also need to prepare a hacksaw for wood or a jigsaw. In the event that it is intended to additional insulation premises, you will have to purchase a trowel for applying glue and a construction stapler.

Beam for the frame

In addition to the panels themselves, before starting the sheathing, you will need to buy Weight decorative trim PVC has a slight. Therefore, it is not necessary to purchase a beam of too large a section. A 3x3 cm or 4x2.5 cm option will suffice. The exception is those cases when the walls are additionally insulated. Insulator plates are installed between the frame elements. Therefore, a beam for this type of sheathing should be selected with a section corresponding to the thickness of the insulation. Also, at the same time, you will need to purchase glue for plates, fungal dowels, a primer and a vapor barrier film.

Other types of frame

PVC wall panels are usually mounted not on paving stones, but on metal carcass. Wooden in the bathroom, sauna or bath can simply "lead". Recently, a plastic thin frame is also often used under PVC panels. Its use allows you to save a few centimeters of floor space. However, it is still recommended to use this option only in rooms with very even walls.

Frame assembly

Panel base elements can be installed horizontally or vertically. It all depends on the direction in which it will be carried out. PVC finish- wall panels. A beam or profile is attached according to the level. Holes for dowels are pre-drilled in the wall. Since the joint between the panels and the ceiling is usually closed with a decorative beam or profile in this place, it must be installed. The same goes for the corners of the room. Here are mounted corner strips.

When installing the frame, it is important to adhere exactly not only to the verticality or horizontality of the elements. It is also necessary to ensure that all the bars are located in the same plane. PVC panels are elastic material. However, distortions will give the wall a not too neat appearance. You can adjust the position of the bars in the right places with the help of small wooden wedges.

Before mounting the frame, you should think about where the heavy wall cabinets, shelves, paintings and so on. In these places you need to fill additional horizontal bars.

Do-it-yourself installation of PVC wall panels

If it is necessary to insulate between the elements of the installed frame, foam polystyrene plates are preliminarily fixed to the glue. Additionally, they are fixed with special "fungi". Next, a vapor barrier film is stretched over the frame.

Actually the walls itself with panels starts from the corner. This is where the starting bar is set. The comb of the first panel is inserted into its groove. The lamella is attached to the frame with special brackets using a stapler. Next, the second panel is inserted into the first and is also fixed. The last lamella on the wall is inserted into the pre-fixed finishing bar. If the width of the PVC element is too large, it can be cut, but not more than 1/3.

After all the walls are paneled, proceed to finish the space above the doors and windows. At the final stage, the upper decorative plinth is installed.

Do-it-yourself installation of PVC wall panels should be carried out in compliance with the following recommendations:

The frame can be mounted on uneven or even unplastered walls. This will save on finishing.

The beams should be attached to the wall only using galvanized self-tapping screws or dowels.

The first skin element must be aligned as carefully as possible. Otherwise, all panels will be installed crooked.

If the interior decoration of the walls of the room is carried out in summer period time, the panels are kept at room temperature for at least 12 hours before installation. When performing installation in winter, this period is increased to 2 days (if the panels were stored in the cold).

Unpack the lamellas as carefully as possible. This material is not very resistant to all sorts of mechanical damage. You need to pull out the plastic elements carefully over the edge and only one by one.

A hacksaw for cutting plastic should be used with fine teeth.

As you can see, the installation of such material as PVC panels, the price of which is low, is an extremely simple procedure. The main thing when doing this work is to install the frame evenly. The lamellas themselves should be fitted to each other as tightly as possible. In this case, the sheathing will turn out to be neat and durable, and the design of the room will be cozy and attractive.

Wall decoration with laminate will be a discovery for those who are looking for original solution in decorating your home. Thanks to the unique combination of aesthetic and technical properties, laminate can be successfully used to cover and finish floors, walls and even ceilings.

Is laminate flooring worth it?

Laminate panels have been tested as a floor covering, where they have proven themselves excellently. Therefore, there is no doubt about the reliability and practicality of the laminate as a finish for the surface of the walls. Laminate panels are increasingly replacing more familiar wall coverings from apartments and offices: lining, Wall panels and MDF panels. This trend can be explained by the fact that laminate has much more advantages over its competitors.

Benefits of laminate finishing material for walls are as follows:

• environmental friendliness of the material. Laminated panels have a wood base, which makes them environmentally friendly;
• durability. Subject to the rules of operation and care, the laminate will last for many years and will rather get bored than lose its aesthetic appearance;
• affordable price. If we compare the cost of MDF panels and laminate, then in the second case it will be possible to save a significant amount. In addition, for walls, laminated panels can be bought thinner, which means cheaper;
• a huge range of textures and colors. This is an undeniable advantage that allows you to use it to implement various design solutions;
• ease of installation. You can lay the laminate on the wall yourself, without resorting to the help of specialists;
• practicality. The coating can be washed, cleaned and polished.

Among the shortcomings, it is worth highlighting the fact that the laminate can not be used in all rooms of the house. Due to fluctuations in temperature and humidity levels, the kitchen and bathroom are not the most suitable places for of this type coatings. Although there are special moisture-resistant types of panels that can withstand even hot water, but they are more expensive and demanding to maintain. The basement, cellar and especially the balcony with their microclimate will destroy even the most durable laminate. In these rooms it is better to use lining or MDF panels.

The website site masters have prepared a special calculator for you. You can easily calculate the area of ​​the walls.

Laminate wall decoration: how to choose the material

In order to finish the wall with a laminate, you need to select and purchase the material. When choosing laminated wall panels, you can save a lot of money thanks to budget options. Budget means types of material that are in a low-order class (have lower quality characteristics). Since the load on the walls is minimal, the thin and less durable laminate will do the job well.

After purchase, the laminate must lie in the room where it will be installed for at least two days. This procedure is necessary in order for the material to get used to the microclimate of the room.

But it is not worth focusing only on cheapness. All influences (small children, pets) on the coating under operating conditions should be taken into account. Therefore, when choosing, you need to consider several parameters:

1. The level of mechanical and abrasive load. If the laminate is to withstand frequent cleaning or the sharp claws of a pet, then choosing the thinnest and most delicate coating is not recommended.
2. Color and texture. These parameters should be combined with the interior and in harmony with the laminate flooring, if any.
3. Mounting method. Depending on which method of fastening is more convenient (on glue or on a frame), the choice of laminate will depend. In this case, the opposite is also true - the type of laminate will affect how you attach the laminate to the wall.

To finish the walls, a tongue-and-groove or click laminate can be used.

• The tongue-and-groove is equipped with a tongue-and-groove lock. This laminate can be glued on without gluing the tongues. The result is neat and dry joints. Also, strips of material can be mounted without glue, like lining, using clamps or small nails.
• Click laminate is an improved model of sheet pile. His lock is presented in the form of a pear-shaped comb, which enters the groove and snaps into place when pressed. Click laminate is characterized as a durable material that is resistant to warping. Kleimers in this case should not be used, since the lock may not close, therefore, when laying on the wall, it is better to use glue.

Finishing the walls with laminate is not a dusty, in the literal sense of the word, work, so everything should go quite simply. Laying laminated panels on the wall is possible in two ways: on the adhesive composition and on the wooden crate. These methods have differences, but in each process a certain sequence of actions must be followed.

How to fix the laminate on the wall - step by step instructions

Step 1: Calculate the required amount of laminate

Since the wall is a flat surface, the calculation is quite simple: the width of the wall is multiplied by the height. Taking into account the cutting and fitting of the panels, another 10% must be added to the figure obtained. For maximum rational use material, you must initially choose the most convenient slats in size.

Step 2: Preparing the Work Surface

Under the glue, just a flat and dry wall is enough. For the laminate, which will be mounted on the frame, it is necessary to prepare the crate. For the crate, wooden slats of 20–40 mm in size, fixed with self-tapping screws at a distance of 30–40 cm, are suitable. The slats are installed using a level clearly perpendicular to the direction of the panels.

Step 3: Choosing a starting point

If the entire wall or its upper part is sheathed, then you should start from the ceiling. In this case, you need to use a level to mark a line indented by one board from the ceiling in the appropriate direction (horizontal / vertical / diagonal). If only part of the wall is sheathed from below, then similar actions are carried out from the floor. Panels are laid from left to right from the corner of the wall and deformation gaps are necessarily left (15–20 mm from the corners).

Step 4: Mounting the laminate on the wall

With the adhesive method: wall and rear end boards of the first row are treated with glue and fixed to the surface with the help of the plank level. Second row the same way smeared with glue, but first inserted into the lock, and then pressed against the wall. For additional fixation, the lock is nailed with nails or staples.

The laminate is attached to the crate with the help of special fasteners - kleimers, which are used to fix eurolining and MDF. Kleimers fix the laminate board at the top and bottom, creating a semblance of a niche. If the fasteners prevent the panels from entering the groove, then it is necessary to cut the lock at the fastening points with a clamp.

Step 5: Step 5 Installing the skirting boards

Leaving the junction of the wall with the floor and ceiling in an unformed form is not recommended. Therefore, you need to use skirting boards and corners. To hide all imperfections, it is better to use overhead accessories, and if everything turned out neatly enough, you can choose skirting boards that are attached to a recessed profile.

Finishing the walls with laminate will undoubtedly add charm and originality to any room. This is a fairly simple process, and it is quite possible to do it yourself, without resorting to the help of specialists.

Pros and cons

Using laminate for wall decoration has its pros and cons.

The advantages include the following options:

• excellent strength of the material (panels can serve for decades, while maintaining an aesthetic appearance);
• environmental friendliness;
• a light weight;
• a huge selection of colors and textures;
• price (inexpensive panels can be purchased for walls);
• the possibility of finishing the wall with your own hands, without hiring craftsmen.

There are few disadvantages to finishing walls with laminate:

• excessive requirements for the preparation of walls before coating the laminate. The walls must be perfectly even, or the installation of a crate is necessary;
• low resistance to temperature and humidity changes.

How to choose?

Due to the variety of colors and textures, wall laminate for interior decoration walls can be used in any room.

When choosing a material, you need to decide what functions, in addition to decoration, the wall covering will perform. As a rule, this is the alignment of the wall and the creation of a stylish updated design.

For coverage walls fit laminate from 21 to 34 resistance class. The material should be selected according to functional purpose one room or another.

Laminate panels must match the style and color scheme to the interior of the room. For small and narrow rooms, you should not choose a dark wall covering, it is better to focus on light shades. For example, coverage white color will refresh the room and make it visually more spacious. Light wall laminate is recommended to be combined with light flooring.

Ways

After the color of the material is selected, they are determined with the method of fastening. The most common of them:

• With glue. Panels can be glued liquid nails or silicone adhesive to the wall surface. Glue must be of high quality to securely hold the panels on the wall. This is the easiest mounting option;
• frame method. Installation of the laminate is carried out on a wooden crate. Wooden slats should be 4 * 4 cm in size. The gap between the guides should be no more than 6 cm. The slats should be perpendicular to the slats.

The frame method is the most reliable, but laborious. It does not require preliminary preparation of the wall. This type of fastening is also suitable for situations where electrical wiring, pipes or other communications need to be masked under the wall covering.

What to fasten?

Fastening can be carried out not only by the previously indicated methods. There is another fairly simple method - laying with the help of kleimers. These are special brackets for mounting laminated planks on walls. Kleimers come in two varieties:

• With serrated edges. They are mounted directly on the board;
• With a flat ledge. Needed to press the click lock.

With the frame method of fastening, nails, staples and metal clips are used. If the perimeter of the coverage area is small, then the first two options can be used. If the area is large, then it is more reliable to fix the panels with clips, since over time the dimensions of the laminate may change.

Mounting

The following tools are useful for installation: electric jigsaw, tape measure, building level, spatula, wooden blocks, a hammer.

Do-it-yourself wall decoration technology:

• Counting required amount laminate, it is desirable to purchase it with a margin;
• You cannot perform the installation process on curves, uneven walls, so they are pre-cleaned, plastered, dried. Or prepare a crate. Also another possible variant- put the laminate on your own on a plasterboard wall. Drywall must be securely connected to the wall.

• Determine the place from which the laying of the first laminated panel will begin. Typically, this is the top left corner.
• They carry out the installation of the panels themselves. If selected adhesive method, then liquid nails or silicone glue are applied to the back of the plank and fixed by pressing for a short period of time. If selected wireframe method, then fixation is carried out using nails or kleimers.
• After installing the laminate, decorative skirting boards are installed. They close the distance between the wall, ceiling or floor.

Laminate panels are attached to the wall horizontally, vertically or diagonally. It is possible to choose one of these options, based on the design features and complexity of implementation.

The horizontal method is ideal for narrow spaces and is able to visually expand the space. Looks great with a combination of two colors. If you vertically sheathe the wall, then in this way you can increase the height of the room. This method is suitable for apartments or houses with low ceilings.

The diagonal version of the wall cladding will make the room stylish and unusual. But this method is the most difficult and requires more boards.

In the event that you decide to lay the laminate on a concrete wall painted with a water-based emulsion, then there is a risk that the laminated planks will not adhere well and disappear after a while. Therefore, it is recommended to pre-clean old layer remove paint, putty and plaster, and prime the surface.

How to cut?

In order for the laminated coating to blend harmoniously into the interior of the room, it is important, in addition to observing the laying technology, to know how and with what to cut the laminate. For example, using electric jigsaw panels can be easily cut. The main thing is to choose the right file for it.

There are several rules for cutting laminated boards:

• On the back side, a line is drawn with a pencil at the incision site;
• Then they put the product on the table in such a way that the part that will be cut off is in weight;
• Next, firmly fix the board and saw off in the right place.

Material cutting can also be done circular saw, but at the same time use the disc for working on metal. It is more difficult to work with this tool than with a jigsaw. When cutting, the laminated coating is placed face down.

Such a tool as a grinder, many owners have in the pantry or utility room. The grinder is successfully used for cutting laminate. The only drawback when working with this tool is the appearance a large number dust during cutting.

How far away from the wall?

Laminated products tend to increase in size upon contact with humidity and temperature changes, therefore, during installation, it is necessary to leave an indent from the corners of at least 1.5–2 cm. similar thickness. In the case of mounting on glue, the board is wrapped in a layer of a special film, and wedges are used on the sides. After graduation installation work indents are covered with skirting boards.

Which side to put?

It is recommended to fix the laminate, starting from the left side of the wall, which is opposite to the entrance, and move to the right from it. Thus, it is convenient to join the material. But if the installer is left-handed, then the installation starts from the other side of the room.

How to close a gap in the wall?

There are times when gaps form between the laminate and the wall when finishing.

There are several ways to remove a large gap:

• Buy a wider plinth at a hardware store or make it yourself;
• Disassemble the cover and move it;

• Cut a thin strip from the same laminate and seal the gap;
• Bend out the existing plinth.

But the last option must be used very carefully so as not to damage the baseboard.

corners

When a wall is finished with a laminate, where there is a doorway, then the platbands should be removed before installation. When laying the product, its edges should not come into contact with the corners of the walls, floor and ceiling, but there should be a gap. External corners can be closed with decorative corners.

How to make backlight?

Wall lighting is interesting way create unique design in room. Lighting for walls can serve as an independent source of lighting, and additional. You can do the installation of wall covering lighting with your own hands. It's pretty fast and not expensive for the budget.

To install the backlight you will need: laminate, LED lamp, screwdriver, building level, jigsaw, glue, fasteners, adhesive tape.

Backlight installation steps:

• First of all, it is necessary to mark the location of the lamps on the wall. It is necessary to think over the layout so that only the light is visible, and not the wires.
• Next, the cable is carried out according to the drawn up scheme, fixing it with holders. It is recommended to run the cable from the outlet in order to correctly calculate its length.

• Now install LEDs, laminate. The planks are divided into parts and glued from the bottom up. The upper panels will press on the lower ones, so you need to wait for the glue to dry. Tape and other fasteners will help to fix them.
• The next step is to connect the power. This completes the installation of the backlight.

How to lay the last row?

In order to lay out the last row of laminate correctly, it is necessary to mark the sawing point, saw it and insert it with a comb into the panel mounted below, and fix the upper edge with liquid nails or silicone to the frame.

How to close the butt?

In order to close the end when finishing the walls, you can use aluminum laminated corners. They act as protection against damage, and as a decorative element. Corners are made in a wide range of colors, so choosing the right shade is not difficult. Attach them with elastic glue.

How to attach the skirting board to the floor?

Plinth is considered one of the main details in the interior. Thanks to skirting boards, you can hide defects and gaps on the coating. Currently, the most common are plastic and wooden skirting boards.

Wooden models are environmentally friendly, but their service life is short. Plastic ones can last for many years, while maintaining an aesthetic appearance. PVC skirting boards are ideal for laminate flooring. They are easy to cut, they are wear-resistant and moisture resistant and are inexpensive.

You can fix them in several ways:

• With clips. This option is suitable for any room. The only drawback of the clips is that in case of dismantling the plinth, you need to buy new fasteners, since the clips do not withstand repeated installations;
• Fastening directly. The plinth is fixed with screws. The attachment points are masked with plugs matched to the color. This method of installing skirting boards is the most reliable.

Installing the skirting board is the final stage of finishing. The plinth must be selected according to the design of the room. It is important to try to minimize the number of joints. Gaps must be sealed to reduce the risk of dirt and dust entering them.

When working with skirting boards, you need to take into account the parameters of the grooves in the connecting parts in order to correctly determine the size of the strips. The fixing points must be chosen so that there is an absolute fit to the wall.

Interior design options

A wide range of laminated products allows you to realize absolutely different ideas design for rooms.

For example, the use of laminate in the hallway as a finishing material for walls will improve sound insulation. This material is perfectly cleaned from traces of dirt, which is very important for the corridor. Sheathing the corridor with laminate has become popular due to the durability and wear resistance of the material.

In the corridor, you can select individual zones using various shades or create a contrast between wall and ceiling. Fully laminated walls, as a rule, are not sheathed.

If you decide to finish the walls with laminated panels inside the balcony and loggia, then you need to remember about humidity and temperature changes. Therefore, it is worth opting for a laminate with an increased stability class. They can completely sheathe all the walls, and can be combined with other finishing materials.

Another original solution is to use a laminate finish at the head of the bed in the bedroom. In the bedroom, you can use material of any class, since there are no strong temperature changes.

The material will look harmonious if you choose textiles for the bedroom of the same color. The design of one of the walls with a white laminate in combination with a light brown flooring looks beautiful. Installing lighting on the wall at the head of the bed will also add zest to the interior. Laminate, passing from the wall to the ceiling, will transform such an important place in an apartment or house as a bedroom.

In the living room in the apartment, the use of laminate for wall covering is also widely used. They can allocate a certain part of the room or, for example, only an area for a TV and a fireplace. The living room looks elegant, in which laminate and other coatings, such as stone, are combined. You can use gray shades of aged wood.

A large assortment laminated panels makes it possible to use them in the bathroom. Due to constant humidity and temperature fluctuations, it is recommended to give preference to a waterproof laminate. In this room you can use absolutely any color palette. An interesting option– highlight the most short wall in the bathroom.

Finishing the attic with laminate - optimal solution. Most often this is an unheated room, so it is important to lay thermal insulation when installing walls. If you install the backlight in the panel, then, in addition to interesting decor, this will be additional lighting for the attic room.

If you have chosen to finish the walls with laminate in the kitchen, then you should opt for panels above class 23. Design options in the kitchen great amount. You can purchase a coating under a stone or a tree. Usually in the kitchen, a kitchen apron or one of the walls is sheathed. You can also decorate the finished coating with accessories, for example, a clock or a picture.

When decorating your apartment or house, you always want to make everything beautiful, exquisite, unique and, most importantly, tasteful. But at the same time, practical, beautiful, modern materials for decoration should be used. The main thing is to decorate the walls in an original way. For walls, wallpaper, paint or special finishing putty are usually used, but lately wall decoration with laminate has become popular. A photo of a design of this design can be seen in the selection. Such a finish will allow for a long time to preserve the aesthetic appearance of the surface, at the same time protect them from the negative impact, from deformation, destruction. But before proceeding with the installation of this material, it is worth considering its main features, varieties and other important nuances.

For interior decoration, various types of laminate can be used, which can differ in many characteristics.

According to the installation method

This type contains the following types of material:

• adhesive;
• sheet piling;
• click.

The first type of laminate is installed on the wall through the use of special glue. The installation of these products is quite easy. However, if you use a low-quality adhesive base, over time, the material may fall off the wall. They have a beautiful variety of external texture.

The grooved and click type is installed using a locking mount. The latter option has an additional adhesive mixture, which provides fastening strength.

Adhesive
clicky
sheet piling

By type of coating

For decoration wall surfaces hallway, kitchen, toilet, bathroom, bedroom, living room, you can use a laminate with a different texture of the coating. To the most common materials depending on outer coating include the following types of laminate:

• MDF panels - this material has an acceptable cost and fairly easy installation. Base surface this material looks like varnished paper. These panels are recommended to finish the dining area of ​​​​the kitchen;
• Chipboard - for laminated boards of this type, it is not necessary to install a crate, which is designed to create additional strength of the material after its installation. These plates have high strength, wear resistance;
• Laminated hardboard is a pressed type material with high strength. It is often used to decorate an apron in the kitchen;
• laminate flooring is the simplest material that is used for wall decoration in the hallway, kitchen, bathroom and toilet.

chipboard
MDF
Laminated hardboard
Floor

Depending on strength class

The classification of laminate depending on the strength class is determined according to the European standard EN 13329, according to which the strength of the material is checked by 18 of its parameters. For wall cladding in the hallway, kitchen, bathroom and toilets, material with a strength class of 21 to 31 is suitable. This class includes a material that does not have high strength indicators.

The material of this class can have a wide variety of textures, color solutions, drawings. Additionally, you can see photos that will make it much easier to choose a plate. You can choose panels with an external texture that mimics natural material, tree, stone, grass and others.

Laminate strength class

Wall finishing technology

If you decide to glue the walls in your apartment or house, then you definitely need to know all the technology for carrying out these works. It is advisable to first see the photo with the methods of installing this material, and you can also see the installation technology of these plates on them.

Required Tools

Laminate finishing includes the necessary tools:

• jigsaw for cutting panels. It is advisable to purchase quality tool, because in the future it will be required for other repair work. In addition to the tool should buy consumable, namely files;
• hammer for adjusting the plates. To install the panels on the walls, it is enough to have a hammer weighing no more than 500 grams;
• ruler and square - these tools should not be too long. Suitable size is about 35 cm;
• roulette - for sure this tool can be found in every home, so you don’t have to buy it;
• a simple pencil for marking notes;
• a bar for tamping - it will be suitable from a plastic base;
• wedges for limiting - these elements are needed to fit and indent the required gap from the wall surface;
• a special bracket, which is designed for padding panels;
• other additional tools - angle cutter, puncher, hacksaw, drill.

Tools for the job

Preparatory work

After the tool is prepared, you need to prepare the surface of the wall on which you plan to install the panels. It is prepared as follows:

• if there is a coating of wallpaper or paint on the wall, then everything must be removed. To do this, you can use a spatula;
• if there is paint on the surface of the wall, then it can be removed with a puncher, for this a special nozzle is used;
• after that, the surface is checked for the presence of various irregularities. If they are, then they should be covered with putty;
• after that, everything is rubbed with sandpaper.

Surface preparation

In addition to preparing the walls, you need to decide how the panels will be laid - horizontally or vertically. This you must decide for yourself. After that, you can start laying the laminate. As it was written above, depending on the fastening, it can be installed in several ways - glue, sheet pile and blade.

Adhesive

Adhesive laminate is easy to install. This material is often used for flooring. different rooms apartments, houses. Features of installing adhesive laminate:

• since panels of this type have smooth edges without locks, it is installed using an adhesive mixture - liquid nails, silicone;
• glue is applied to the wrong side, a strip is laid, glue is again applied to the end and the next panel is laid again, and so on the rest of the panels are laid;
• if there are currents of glue, they should be removed with a piece of cloth, which is pre-moistened with vinegar;
• this material is installed without a crate.

A layer of adhesive must be applied to the surface of the wall
Applying adhesive to laminate panels
Material laying

sheet piling

Sheet pile laminate is often used to decorate the walls of different rooms. Since this type of panels are equipped with special locks, no adhesive mixture is required for their installation. Features of sheet piling installation:

• panels of this type are installed dry, while there must be a crate;
• strips must be attached to the grooves of the tongue;
• the fastening of these panels is similar to lining, in which nails and staples are used.

Laying laminate flooring
Fastening sheet piling with clamps

clicky

This type of material is a more advanced material for interior decoration. It is installed in a double way - lock and glue. It has high strength, it can even be laid on the crate. Is it worth talking about the wear resistance of these panels? Unlike the above types of laminate, this type has high strength, resistant wear.

Fastening click laminate boards to each other

Laminate in design

Depending on the purpose of the room, the laminate can be used to design a particular area.

Hallway

Laminate is an excellent material for wall decoration in the hallway. With it, you can easily replace the old coating, which has lost its appearance, has become old, pale. It can be installed in the hallway either on the entire surface of the wall or on a panel type, when the lower part is finished with a laminate with a wood-like texture, and the upper part is more light colors. Do not forget to look at the photo with wall decoration options in this particular room.

Kitchen

Laminate panels can be successfully used for finishing kitchen walls. Since this material has a different texture, surface, you can easily find a material that can replace tiles, cork, marble and granite type coatings, wood. Many photos show how laminate can transform the style of this room.

For the kitchen, you should choose a material with a high strength class that can easily withstand moisture, not be damaged, and withstand mechanical stress.

Living room

If you have not yet thought about finishing the design of the living room with laminate, then it's time to think. This material is the most suitable for decorating walls in guest rooms. The main thing in this matter is to choose the right color and texture of the panel pattern. Of course, the laminate that is used for kitchens or hallways will look out of place here. If the style of the living room is strict, then the panels should fit exactly into this type of style. Often it is installed in the area above the TV or below the windowsill.

Bedroom

Laminate can be used to decorate the walls in the bedroom. It can replace wood flooring, which usually requires a large investment.

Features of the choice of material for the bedroom:

• textured laminate flooring wooden material will give the room a more respectable, rich appearance;
• for the bedroom, you can use panels with various patterns in the form of flowers or patterns. You can preview photos from various types these panels;
• tones should be chosen more gentle, soft, giving comfort and warmth to the room.

Balconies and loggias

Laminate is a practical material that can protect walls from various negative impacts, so it is often used for finishing balconies, loggias.

Benefits of finishing laminate balconies, loggias:

• beautiful, aesthetic appearance;
• closing of all cracks;
• protection of walls from negative impact;
• long service life of the coating. Typically, the coating can last over 15 years.

attics

Laminate is often used to finish the attic. It can be used for both walls and floors. Since the wooden material is quite expensive, so the panels will be an excellent replacement for it. In addition, their service life is very high, sometimes panels can last almost 20 years, while they do not deform or break. Appearance attic finished with laminate is respectable, strict and at the same time cozy.

Hello dear blog readers! If you are here today, then you are thinking about finishing the walls with laminate. But you have no idea what they might look like. Just for you, we have collected 150 photos of interiors with laminate on the walls. Looking at them, you will definitely and finally decide.

We will definitely consider mounting methods, allowable gaps, color combinations and much more. Let's start in order.

Summary of this article:

Laminate on the wall in the interior of various rooms

The walls are finished with laminate in completely different rooms and premises. In this section, we will visually consider the options for such a finish.

In the interior of the living room

Wall decoration with laminate in the interior of the living room is very common. The design of any living room will definitely not suffer from the presence of this "traditional" flooring.

In the room

The laminate wall in the hall further ennobles this already significant space. You can see this clearly below.

In the interior of the kitchen

Laminate wall decoration in the kitchen is not only design, but also practical. A good waterproof laminate will perfectly visually fit into the interior of the kitchen and functionally complement it. For example, an apron made of this material is easy to clean and clean, and at the same time looks great.

In the bathroom

Toilet and bathroom finishing waterproof laminate very relevant in last years. This applies not only to the floor, but also to the walls. Options for such finishes are presented below.

In the interior of the hallway

Finishing the walls of the hallway with a laminate is carried out horizontally, vertically, or herringbone. The design of the corridor in all cases remains in the black.

In the nursery

Laminate in the children's room can highlight one of the walls, for example, behind the door. There are options for complete lining of all walls.

In the interior of the bedroom

The design of the bedroom, with a laminate wall, stands out for its novelty and modernity against the background of other outdated finishes. See for yourself.

Wall and ceiling decoration of a balcony or loggia

The walls on the balcony or loggia can be completely or partially covered with laminate. It is better to limit yourself to one surface - it looks more interesting.

Got the rooms sorted out. It's time to consider mounting methods. More on this later.

Mounting methods

There are several ways to attach laminate to walls. How to lay - in the end, it's up to you, we will only talk about possible cladding and installation technologies.

With the help of clamps

Kleimers are special metal staples designed to securely fix the laminate. This fastener is perfect for mounting and laying laminate panels on walls.

Kleimers can be screwed into a wooden or metal crate or at the very base of the wall. They tightly cling to the grooves of the laminate board and firmly fix it.

with crate

A crate or frame made of wood, or metal profiles, are assembled, observing a step of half the length of the laminate lamella. This will be quite enough for a secure fixation.

Without crate

Many people will think - is it possible, and how to fix the laminate on the wall without crates. We answer - it is possible and very simple - with the help of glue. If the surface of the walls is not even, you first need to align, and only then proceed with gluing.

How to put yourself?

All work on laying laminate on the walls can be done independently. You don't need to be a super master to do this. Any wall can be sheathed with high quality with your own hands, whether it is smooth or curved.

Very often people ask us - how to nail the laminate on the wall? So - you don’t need to nail it anywhere, even if you imagine that the nail heads are driven into the grooves of the lamellas, then the next board will not lie tightly.

Remember the main thing: before you start fixing the laminate on the walls yourself, let it rest after purchase, it must be saturated with the atmosphere of the room and take on the ambient temperature.

Do-it-yourself fastening can be divided into two main options - horizontally and vertically.

How to mount vertically?

How the laminate is attached to the wall vertically - you can easily guess. And special difficulties not here. A horizontal crate is simply assembled and mounted on it with glue or kleimers.

How to mount horizontally?

How to lay a laminate horizontally on the surface of the walls is also easy to guess, but there is a nuance here. The laminate is heavy in itself, because of this, the masonry must be reinforced from below with a bar so that the whole structure does not move down.

Or, you can use kleimers, then no one should roll away anywhere. We recommend this option to everyone.

How to glue?

You can glue laminate on the walls horizontally and vertically. You can without bothering to sculpt lamellas directly on concrete wall if it is very flat.

If the wall is uneven, you must first level it with putty, plaster, etc. Or you can assemble the frame and glue the laminate on it.

Sticking with sticking, and what it will hold on to - we'll figure it out further.

What glue to use?

Pasting walls with laminate requires a powerful adhesive composition, because the weight of the lamellas is not small.

Do not save on glue - this stinginess can lead to disastrous consequences in the future. The laminate may fall off after a while.

Take quality options for liquid nails from reputable manufacturers.

Clear with liquid nails. It's time to discuss allowable clearances.

How much to retreat from the walls when laying?

When laying laminate on walls, leave a distance of up to 20 mm from the floor, walls and ceiling, because laminate can expand over time.

The gap can be increased if you plan to close the ends with special corners.

The distance between the wall and the laminate is not important. If you mount the panels directly on the wall, then no gaps are needed, if on the crate, then it all depends on the section of the bars.

Many people choose thicker bars in order to have more space behind a laminate wall, to hide wiring and various communications.

We figured out the indents and gaps. It's time to think about how and with what you can ennoble uneven edges after laying.

How to close the edges (ends)?

After laying the laminate on the wall, the question arises - how to decorate the edges or ends? To help you are sold plastic corners various colors and shades.

Additionally, profiles in the shape of the letter P are on sale. They are metal and plastic.

You can use a rubber plug, which is often used to seal gaps during installation stretch ceilings. The main thing is that the colors match.

All of these options are attached to liquid nails or ordinary silicone sealant.

How to cut at the walls without disassembling?

If it so happened that the laminate, laid tightly against the adjacent walls, began to stand up, this is a sign that it is time to cut it.

It is best, of course, to disassemble the entire structure, but if there is no such possibility or desire, you can trim it without disassembling it.

To do this, you can use a hand-held circular saw, setting a step in the thickness of the laminate with a gap.

There is another option - ordinary grinder, but here you need to be very careful, because. this tool is very dangerous. On sale there are special saw blades for laminate.

You can also use a laminate file, varieties of which can be found in hardware stores.

The easiest way to do trimming is with a sharp chisel, outlining the cut line construction knife. The cut will not turn out quite even, but this can be easily corrected by closing the ends after the work is completed. We have discussed above how this can be done.

A color scheme

It's time to think about how to combine laminate different colors on the wall to match furniture, doors, wallpaper, etc. There are options for combinations by bands, i.e. one stripe of one color, the second of another.

In one of the articles, we already once considered in detail what it could be, if you are interested, follow the link and read it carefully!

Can be combined in checkerboard pattern, or even randomly. This looks good too. Next, let's take a closer look at how the laminate of some colors looks on the walls.

Light coloured

Light laminate, laid on the wall, goes well with furniture of all shades and varieties.

Grey

Laminate gray color, laid on the wall, emphasizes the individuality of the room and gives it seriousness and charm.

White

The white laminate on the wall looks great. A wall finished in this way brings light into the room, making it more spacious and bright.

Leather

In the last few years, it has become very fashionable to mount leather laminate on the walls. This pleasure is very expensive, but despite this, he has many fans.

We figured out the colors and their combinations. It's time to consider interesting ideas decorating the walls with laminate.

Decorating and decorating walls

You can do the design and decoration of the walls with a laminate yourself, or you can entrust these actions to professionals. How to proceed - choose for yourself, we will only offer some interesting ideas for implementation.

Decorative vinyl laminate

Vinyl (PVC) laminate is a great decorative material, which can be laid on the walls in absolutely any room. It is moisture resistant and has a self-adhesive layer.

panel

For a variety of your design, you can do wall panel from laminate. You can play with flowers to your heart's content. Laminate panels can be laid both lengthwise and across.

Behind the sofa

The wall behind the sofa can be highlighted with a laminate. This wall will become accent and will be the object of everyone's attention.

That's all. It's time to turn around. We sincerely hope that the 150 photos of interiors with laminate on the walls collected in the article helped you finally decide on the future design of your walls. It remains only to implement the plan. Great luck!