Cheap fence with your own hands. What are the materials for the fence, and which of them are better from which cheaper to build a fence

Complicated but cheap fence

The construction of his house at all times was quite expensive. That is why it appeared a large number of Anecdotes on how spouses are completing their home. Most of all the money is usually leaving for capital construction, so many prefer to save on the decoration and refueling the site. That is why many choose an inexpensive fence at the first stage, which and their direct functions can perform, and there will be no fabrical money. The easiest way to save is to make a fence with your own hands. In today's abundance of materials on the market, this will not be a special problem.

Why should a fence be on the site?

The view is that your site can be a year-another to simultane without fence, erroneously. It makes not only a decorative function, but also hides what is happening on a plot from prying eyes, and also protects the territory around the house from thieves and ill-wishers. After installing the fence, you will not need to bring chairs every night or hoses into the house so that they are not stolen.

Some requirements are put forward several. Such a design should be moderately durable and reliable - to a greater extent it depends on the quality of the installation of the poles and fastening them the main finishing material. In addition, the issue of the aestheticness of the fence is important - you can hardly want to see the gray bulk fence from concrete in its plot, which soviet time Industrial enterprises were fencing. When independent installation The fence is worth thinking about the simplicity of installation, because without certain technical skills, complex structures will not be collected.

What material use to build a fence?

You can make a cheap fence with your own hands using the following materials: wood, professional flooring, PVC profiles and chain grids. If you take a design cost as the main criterion, then you should stop at the last option. However, all other materials ensure the secrecy of what is happening on located plotBut the chain grid serves as a decorative fence rather - through it you can safely follow the fence taking place on the other side.

To begin, it is necessary to determine which of these materials will be used during construction, and only then consider the technological nuances of the construction of the fence. Estimation for the fence is prepared after the choice of materials, the calculation of the required number of pillars, partitions, fasteners And everything else, what will be needed during construction.

Wooden fence: simplicity in the processing and strength of the structure

An example of a wooden fence

There are a huge selection of wood for the construction of fences today in stores. This material has competitive advantages Before others, because of which it is the most popular on the market. Among such advantages:

• low final cost, since such fences in most cases are fully manufactured from wood;
• the ability to choose any color and shade by using ordinary paints when finished;
• the ability to create both small decorative designs and high and inaccessible fences.

Wood and obvious disadvantages, because of which many choose fences from professional flooring or PVC sheets. Due to the characteristics of the material that begins to disappear under the influence sun ray And to twist when moisture getting (this problem is relevant even for painted fences, since paint with time begins to peel off), the service life of such a fence will be very dependent on the care of it. Wooden fences recommend to repaint every couple of years to maximize their life.

What is needed to build a wooden fence?

In order to build a wooden cheap fence with your own hands, you will need it myself finishing material (fence various size), transverse partitions and support poles (for savings, many use wooden designsthat need to be thoroughly treated before immersion in the land means against rotting), pegs for marking, stretch rings. Depending on the method of installing the poles, it will take cement and sand (in case of pouring a pillar concrete - this option will be the most stronger and reliable) or ordinary stones (A hole for a pillar falls asleep by large cobblestones, which reliably hold the pillar in the same position).

To prepare a holes for the installation of pillars, the drill will be needed. Fix the transverse boards to the columns is easiest to be screwed, they can also be used to screw the stakenice. A more economical option is nails, but they hold the boards worse (can overlap with time), and if necessary, the replacement of part of the fence creates a lot of problems.

Wooden fence construction process

Since in the question "What kind of fence will be the cheapest?" A tree as the material confidently leads, then the question of construction we will look more detailed. Begin to build such fences with marking areas and determine the location of the input wicket and the gate. To do this, pegs and stretch rings, which we wrote above. Accurate marking is the key to the sustainability of the future design.

After each peg, a pit for support pillars is being prepared. Its depth and dimensions will depend on the method of installing these columns, but this can be written this article. In most cases, it is recommended to immerse the post in the ground by 25% of its length. In order for the design to be reliable, and the posts did not believe, you need to immediately install the struts, and then pour the pit with concrete or fall asleep with stones. When the composition freezes (for this, ideally, you need a day - during this time the concrete will grab, and the pillar cannot be broken) set the transverse boards on which the stakenik is fixed.

The last stage of construction is the impregnation of the fence with special mixtures that give it moisture resistance, and painting.

Video instruction

Mesh-Rabits Fence: Simple and Durable

It is the cheapest option for the fence, which can be even cheaper and faster than wooden. Such a fence will be completely resistant to the "charms" of the weather, moderately durable and reliable (meaning its stability after several years of operation), and also extremely easy to install.

For the construction of such a fence, all the same reference pillars (usually metallic), cement and sand for their fill, shovel and bur for pouring holes, grid of the required length and fasteners for its installation (wooden out or metal corner), beep and stakes for marking . It is recommended to stop the choice on a galvanized grid, which is a bit more expensive than the most common, but does not need painting and is not afraid of corrosion. There is a more expensive option - a vinyl coating grid that fully protects the metal from moisture.

At the initial stage, everything is done in the same way as for a wooden fence: posts are placed, pits are made, poles are installed and poured concrete or flooded with stones. Then between the pillars mounted fasteners for the mesh: it can be steel corners, boards or hard cable. Only after that the grid is attached to one side at the first pillar and stretches around the rest of the columns. It is extremely important to avoid the sagging of the grid at this stage. There is another option - a sectional fence. In this case, the grid cuts into pieces, which are attached between the adjacent two pillars using metal corners (in a kind of frame). It is easier and reliable, but also costs homeowners more expensive.

Video instruction

Profile: reliable and faster than a tree

Fence from professional flooring

Found tremendous popularity already in the 21st century. Today in the markets and in construction stores you can find dozens of varieties of this material. That is why professional flooring is in demand: the prices for the cheapest types of it make it a direct competitor, but the most dear varieties It may well replace full-fledged brick fences.

A set of necessary things for the installation of things here is exactly the same as in the case of a chain grid. Required pillars, boring, shovel and cement mortar, lintels (lags of wood or metal), which will be attached to the professionalist, screws for fastening and the professional flooring itself. The construction mechanism is exactly the same before the stage. After it is recommended to paint all metal elements to protect them from corrosion.

Video instruction

Plastic fence - a compromise between a professional flooring and chain grid

Many consider such fences as a compromise between a cheap and "transparent" chain chain and more expensive and reliable professional. Polycarbonate fence also refer to budget solutions, although it is the most expensive of economical fences. The benefits of such structures are somewhat: they do not darken the site, because they partly skip the light, they are not harder to be mounted than fences from the professional leaf, and look just wonderful. The only drawback of such a design is plastic itself, which can easily burst with a random hit or randomly hit by robbles, for example.

Tool set I. supplies, as well as the installation procedure here is absolutely the same as the fence from the proflist. The only difference is in the amount of lag, which will be directly dependent on the width of the plastic sheet used in construction. Usually, they are required at least three: two are attached at the top and at the bottom of the fence, one - in the middle. If a narrow polycarbonate is used to build a fence, it may be necessary to install the fourth lags - such a fence will look especially beautiful, since it will be divided immediately on 3 blocks in height.

Summing up

Progress is not standing on the spot, and if earlier it had to choose a cheap option for the fence only between a wooden and chain grid, today there were such wonderful materials such as professional flooring and polycarbonate. Establish them easier than the fence from the tree, and because of large sizes Fragments of such a fence occupies the whole procedure at times less than a time.

The fence is essential functional element Private ownership. He denotes borders land plot, protects its territory and buildings on it from curious eyes, criminals and unauthorized penetration. The fence is a fence at home, a kind of continuation of it external walls. Therefore, it also performs important ornamental functions, being a "face", " business card»Ownership.

The construction of the fence requires a special approach, because it affects the issues of vacationing land and the interests of people living or leading their activities in the neighborhood. Before disappointing the house with a fence, you need to decide on its future appearance, design, size, high, taking into account the current norms of the law. How to do this is how to build the most suitable home and does not violate the rights of other citizens, this material is dedicated.

Focusing on the letter of the law: what kind of fence can be built

General questions concerning how the fence should be, how to make a fence between possessions and in a separate area, are governed by legislative acts and low-speed (construction norms and rules). These include:
- The federal law №66-F3;
- SNiP 30-02-97 "Planning and building the territories of the horticultural associations of citizens, buildings and structures";
- Snip 31-02-2001 "Houses residential houses";
- SP 30-102-99 "Layout and development of the territories of low-rise housing construction";
- CH 441-72 "Instructions for the design of the platforms and sections of enterprises of buildings and structures".

According to it regulatory documents "The site should provide for the necessary measures to protect against unauthorized invasion." And one of the main events should be a device for the fence of a private house, that is, the fence.

At what distance you can build a fence? The existing slopes determine that:
- the distance between the house and the fence should be at least three meters;
- the distance between domestic, non-residential buildings and fence - at least four meters;
- the distance between the trees planted along the border of the site, and the fence - at least two meters;
- The distance between the low-spirited plants and the fence is one meter.

These norms are advisory and may vary depending on the size of the land plot, the location of the house relative to the boundaries of the ownership. The height and transparency of the fence are regulated more clearly. Norms that determine these characteristics of fences are required for execution.

What kind of height can be put? The height of the private house must be 1.5-2.5 meters and depends on the floor of the house, as well as placement of the barrier relative to neighboring sites. If the residential building consists of several floors, then the height of its fence may exceed the specified parameters. The fence for the cottage, two-three-storey mansion is allowed to build three or more meters high, subject to coordination with local governments and neighbors.

Which height should be a fence between neighbors? The height of the fence between neighboring sites and households should not exceed 1.5 meters.

What fence can be built on transparency? The elements of the fence that are installed on the borders with neighboring sites must be mesh or lattble, that is, translucent. Elements that are installed on the borders between the household and expensive, forest, landing, the object of public use, as well as the fence in front of the house can be deaf and opaque.

Compliance with the norms prescribed in the slope will allow faster to navigate in the manifold possible options Devices of fences, avoid conflicts with government representatives and the owners of neighboring possessions.

Options for private houses

What are the fences? The most diverse design, manufacturing material, type of installation. Below we give their conditional classification, list and brief description species.

Materials manufacturing. Fences and fences for the house are arranged from:
- wood sawn timber (Palcol, boards, stakenat, woven, wooden panels, veneer);

Brick;
- stone - artificial and natural;

Concrete, reinforced concrete and concrete blocks;
- metal mesh (rubber grid);

Iron grille;
- forged elements;

Professional flooring (steel profiled sheets);
- polymers.

To create a more aesthetic design, these materials are combined by each other, building supports and pillars from concrete, stone or brick, and the walls of the fence of metal, wooden, ceramic or polymeric materials.

A separate type of fences are the so-called "live" fences for a private house. They are satisfied by planting special trees and bushes, which, raging, firmly adjacent to each other and form a solid hedge. A lively fence around the house performs a preferential decorative function and practically does not protect the plot from penetration, so it is rarely used in its pure form. It is more often combined with wooden and stone fences.

Designs of fences. Fence for country house may have monolithic, stationary or team-collapsible, portable design. Monolithic is erected from brick, stone, concrete. It cannot be disassembled and transported to another place. The design of the team type is arranged from metal sheets, Mesh and lattice materials, wood, polymers. Such a fence near the house can be dismantled, disassembled into separate components and transport.

Mounting and installation methods. The fence at home is mounted, arrange by carrying out:
- masonry work, if it is performed from brick and stone (masonry monolithic fences);
- welding workif it is performed from metal elements (welded fences);
- work on drilling and scoring, if it is performed from piles, paling, steel pipes and stakes (drow-scoring fences);
- installation work on the soil, assembly, if it is performed from concrete blocks and professional flooring (prefabricated fences);
- Works on vaccination, if its walls are performed from sawn timber, wooden stakes, boards or his poles have a small depth of occurrence (bought fencing).
"Live" hedge is planted into the ground.

Modern trends in fences design

Fences are based on not only the signs listed above. Distinctive features for them are stylistic design and design. Modern fences are built in the classic, romantic, Victorian, castle, mediterranean styles. Modern and country styles today are very popular.

The design of the private house is determined by the architectural design of buildings and. Today, the dominant tendency in it is a harmonious combination of texture, colors and materials of materials, the proportionality of forms. Largely beautiful fences For the house - these are fences in tone or, slightly lighter or darker. They are not distinguished by brightness, do not dominate in general color gamma, and emphasize, complement the styling and.

What kind of fence is better to put?

All types of fences have their advantages and disadvantages, characterized by varying degrees of strength, a certain service life, differ from each other worth and aesthetic attractiveness. What kind of fence is better? How to choose a fence from the options presented in the market? To respond to these questions, compare the fences.

1. The strength of fences. Solving which fence to build should be remembered that the most durable, resistant to shock loads and the influence of factors ambientare monolithic slats from stone, brick and reinforced concrete. They are difficult to damage or break. Middle strength characteristics Possess fences made of metal sheets and lattices. The indulgent effects on them are reducing atmospheric precipitation and moisture, which can cause corrosion. Low speeds of fencing from wooden boards and steel grid. Reflecting on what kind of fence is to do, take into account the fact that the collapsible structures are more vulnerable to mechanical effects.

2. Service life and durability. Determining which fence to put on the site, you need to take into account the service life of the materials from which it will be manufactured. Natural stone, brick, concrete, wrought elements, modern polymeric materials can be operated from 20 to 40 years or more. Professional flooring, metal grid - about 20 years, iron lattices - 15 years, lumber, subject to their timely and regular painting - from 5 (aging fence) to 10 (frequency) years.

3. Design of the fence of a private house. In solving the issue, what kind of fence to choose for home, the aesthetic attractiveness and design of the fence play a special role. The combined models are better describing, in which the support pillars are erected from one, and the walls from another material. And walls with rifrance, weaving, decorated and decorated decorative elements, always look more attractive. If you have doubts about choosing among metal fences, what to put a fence: from grids, grid or forged, it is necessary to know that the steel grid looks like "cheap" and simple, more suitable for sampling garden and country sites. For the device, the fence of a private house is better to use lattices and forged fences. The latter look very stylish, solid and presentable.

4. Price range. The determining factor in the selection of the barrier is its value. It develops out material costs for purchase and delivery essential materials, for the payment of construction and mounting workdepends on the thickness and height of the future fence. Solving which fence to choose, it should be considered. It is more expensive than all stone, brick and wrought sorrow. Their price varies in the range from one to three thousand rubles per 1 m². Cheaper fences from iron lattices, polymeric materials, wooden paling. From five hundred rubles to one thousand. The cheapest option of fences - hedges from the stakenik, boards and chain grids. Their price is three hundred and five hundred rubles per 1 m².

The construction of the fence of a private house requires marginal care at all stages of construction. And the first one is the stage of design, choice, decision making. At this stage it is important to decide where and which setting the fence, what the sizes will be. By preferring one or another option, remember that it should equally comply with your personal tastes, and the norms of current legislation. Successful and beautiful solutions!

The question of choosing the fence of the site faces the developer at the final stage of construction.

Therefore, before comparing different species Fences, we note that these designs require logical linkage with the facade of the building.

Agree that it will not be too harmonious to look a fence of steel mesh on the background beautiful facadeFinished with natural stone or reinforced concrete fence around the house from a wooden bar.

Leaving these important nuances At the conscience of designers, let's see what you should navigate to choose a sufficient fence for a sufficient and durable, but not too expensive.

Fence from professional flooring

This is proven a budget option Fencing site. It does not require a powerful foundation for its construction. If the height of the fence does not exceed 1.5 meters, it will be enough to fill with concrete only wells for metal columns of the frame. The depth of the sealing of pillars in concrete does not make at least 80 centimeters. Collect the frame will be much more convenient if you choose the poles for the fence of non-round, and the square cross section.

The main advantages of fences from the professional flooring There are high speed and simplicity of installation, durability and aesthetics. Color professional flooring is not amenable to corrosion, it is well withstanding frosts and heat, and the height of such a fence can be any, because this material is cutting on the size of the customer. For the price of the fence from the corrugated floor, it turns out more than the mesh, but cheaper than brick.

Fence from the grid

The one who is going to build a fence from a metal grid will certainly not regret his choice. The mesh design has a number of important advantages and is distinguished by the minimum value among other types of fences.

The second dignity of the fence from the steel grid is high installation speed. Bay concrete pillars, it remains only to roll the grid, pull it out and fix it on the pillars using steel clamps.

What else attracts the developers of mesh fences?

Good plot visibility, illumination and ventilation. The first factor allows to reduce the risk of theft, and the second and the third are especially valued on small dachaswhere each meter of land is used under a garden or garden.

Poles for the collection of metal mesh are three species. The best option is steel pipes or corner. Concrete column columns withstand long-term operation. If we are talking about maximum savings, then for 10 years, for the fence of the cottage, there are enough oak pillars for the fence of the cottage, the ends of which before installing into the ground should be soaked with an antiseptic or conventional motorcycle throughout.

Wooden fences

Solving the question of which fence is better and cheaper, you should not forget about wooden structures. The range of selection here is quite wide. It can be used to fencing the site not only the usual inexpensive stakenik, but also very original wooden structures from solid unedged boards imposed by the "Christmas tree" on each other.

Wooden fences "live" long enough And this period is completely dependent on the quality of material processing. If you do not regret the antiseptics and high-quality paintT. wooden fence will last at least 15 years. It should be noted that these fences are especially harmoniously look at sites with houses from a rounded log or bar.

The last "pisk" of the country style is a wooden fence-frequency, made of high pillars with pointed tops. It is clear that such an unusual fence will be appropriate only for the site, all elements of which are withstanding in the overall stylist.

Brick fences

This type of fences is particularly popular because it combines the maximum strength and durability. Brick fence can not be called cheap. However, given that it will stand at least 50 years old, you can go for such expenses.

The only warning for those who want to establish a brick fence is the aesthetic side of the question. It should not be used for such a fence of a brick of one species, size and color so as not to get a dull composition resembling a prison wall.

Use facial and flat brickBoldly enter forging elements, inserts from natural stone, wood and your creation will acquire the necessary solidity and impeccable aesthetics.

Pillars for high brick fence should be strengthened steel pipe, I chose it in a reliable foundation for a depth of at least 1 meter. In this case, the simpleness can be postponed in the Polkirpich and significantly saved on construction. The base for a brick fence is best lay out of a large stone with a latch of seams. This option looks particularly solid and kindly.

Combined fences

To say unequivocally, what kind of fence is better to put in the country we will not become, because not only financial capabilities affect the choice, but also the taste and sense of style of the developer. Someone is very comfortable for a three-meter fence from reinforced concrete panels, the other does not recognize anything other than openwork forging and wood, and the third really likes a live fence.

However, the combined fences today find the maximum number of fans, as they combine high aesthetics and durability. Combined fence usually put along the main facade of the building and try to make it as expressive and harmonious as possible.

If the budget is limitedBut I want to make a fence on the dacha beautiful and reliable, combine the natural stone on the base and pillars with the filling of the trades of the sheets.

For middle budget A combination of stone with decorative brick or tinted wood is perfect.

In the absence of a deficit, we recommend that you choose the choice on forged fence which will be set on the foundation from ripped stone. Great fences laid out of stone and colored bricks with sacrons decorated with writhing lattices.

The same who loves original solutions Surely choose a fence from Gabion. This is a very interesting and unusual design is a lattice container made of steel wire filled with stone. They put such a fence, layerly filling the blocks-containers and fixing them with each other with a wire.

Why do you need a fence at all? What functions does it perform? How important is the quality of the fence? Is it possible to set the fence with your own hands. Yes, so cheap and beautiful?

Some of the main features of the fence are barrage function and security! Remember how, not having time to purchase your country cottage areaYou immediately visited the idea that I would not hurt to turn around and, thus, consolidate your rights to the just acquired site. The second idea who visited you was the picture of your site, hit by a beautiful fence. All sorts of vegetables, flower beds were calmly grown on the site, flower beds - and all this without danger of being collected by "night guests", which often apply their "ruin" visits to weakly protected areas.

Your initial desire was very correct! You definitely need to put a strong and expectation fence around your site. Whether you will be built, or do gardening and gardening - the fence will protect and save your values \u200b\u200bfrom the "Eye of the envy" and "rolling hands."

When the decision is made - it's time to proceed to action! But ... on modern market Great many all kinds of fences! Some - require considerable financial costs, other specific knowledge, the third - experience, fourth - the neighbor is the same ...

It is not easy to answer this question! Each fence has its advantages and disadvantages. We will try to describe in more detail the most popular fences in order for each readers to determine for himself with the choice.

By the way, if you, the reader, do not belong to the number of happy owners of thick wallets, then this article will help you decide and put on your own fence around your site! This is a fascinating occupation, during the installation process you will study a set of new skills, learn some tricks and subtleties! Self-education - always good! Excess reason to raise your self-esteem and test self-esteem! And the fence delivered by its own hands will be the proof of your business.

First of all, the fences are solid capital and lattice decorative. Some fully close everything that happens in your yard, others allow you to consider everything, but do not allow inside.

What fences are in our time?

• Wood;
• Of concrete slabs solid and decorative;
• Plastic;
• Brick;
• Grid;
• From professional flooring.

Let's consider in more detail each type of fence and ways to install it with your own hands.

Wooden fences are very popular, they are easy to install and spend repair work. Let's get acquainted with the advantages and disadvantages of such a fence.

Advantages of fence from wood:

Relatively inexpensive;
A wide variety of forms and models;
It is easy to install, even the amateur will cope.

Disadvantages:

Requires constant care (painting);
Disted, the service life rarely exceeds 10 years.

To install your own hands of a wooden fence you will need materials and tools:

• Hammer, nails;
• Level;
• Pegs and rope;
• Columns of wood or metal;
• Cement mortar;
• Wooden bars with a length of 2-2.5 m;
• Forms made of wood like;
• Varnish, olifa, paint;
• Loop hinged;
• Like or lock on the gate.

In order to purchase the material necessary for the construction, you can contact any construction store, where you can pick up the like shape and dimensions of the blanks. The most suitable size of future patellium is 85 x 145 mm. This option is less costly in time, but more costly in finance. If you want to save a little on, refer to the Forest Warehouse, where you will be offered cheaper, but requiring additional processing products - a cropped board. True, you will have to tinker a little with her - to overtake, walk the grinders - but it will be possible to save significantly.

It is advisable for the columns to use metal pipes, Schawler, but if there is no such possibility - and wood treated with special mixtures will come down to prevent rapid rotation.

Whatever the material you would be purchased, must necessarily follow it to proliferate and dry! This will depend on the service life of your wooden fence.

• To begin with, mark the border on which your fence will be held, with a peg and rope. Tensioning exactly the rope throughout the perimeter of the future fence.
• Decide where the wicket will be, its size, mark the favor of the columns.
• Follow the finding of your columns at a distance of 2 - 2.5 m one from the other. Drop the pits under the column depth at least 30 cm.

• Install and inspect the columns, at the same time setting the columns strictly by level - they must stand straight and not fall into any side. If you wish and opportunities, you can concrete columns, so they will preserve much longer.
• On each column above and below, we screw the bars with a cross section of at least 50 x 50 mm.
• Between the columns on top and bottom we are deposited and screwed them from both sides with the help of self-sufficiency or nails.
• It was a queue to the cooked cooler to navigate the cross. The distance between the staff may be at least 1.5 2 cm, however, if you want to make this wooden fence with a solid - nail one board near the other close.
• When your fence is already fully installed, you should proceed to its painting. To do this again handle everything wooden elements Obacity Olifa, and after drying with varnish or paint.

For more rich color and to strengthen protection from natural phenomenaCross the fence 2-3 times. It will prolong its service life.

Video: Review of fences. Homemade wood fences

The concrete decorative fence in the last decade has gained immense popularity. The reason for increasing popularity was the invention of collapsible structures, convenient during transportation and installation. Designers have improved these concrete structures And filled the markets with all sorts of models of such fences. Such fences are ideal as for industrial enterprisesand for the private sector (houses, cottages).

Advantages of concrete fence

• Unpretentious;
• Long service life - more than 100 years;
• Easy and quickly going;
• Affordable price;
• Model manifold.

Disadvantages of such a fence:

• It is difficult for all operations to assemble the fence to perform independently, when delivery and installation will necessarily need a help of 2-3 people.

Types of concrete fences:

Sectional set-ups are widely used to fencing private houses, differ in variety. Collected from small sections that are inserted into the grooves of columns. Everyone can pick up the height of the fence and a certain model. There are openwork sections, lattice and solid. For assembly enough 2-3 people;

Independent - more often apply to the fencing of industrial facilities, are a huge solid wall, with a large ornament. Such a fence completely hides everything from unauthorized eyes, which is on the other side of his side. The peculiarity of an independent fence is that each of his section has its own support and does not need pillars at all. The disadvantage is that when it is installed and dismantling without a crane, you can not do.

After deciding to establish such a barrier on its site, take care of the air ventilation. If you decide to be tightly accepted, then the entire ecosystem of your garden-garden may suffer from such a solution. Without regular ventilation of the soil, they are striking, the trees be rotated to rot. The situation will save several lattice or openwork sections.

Marking of the future barrier with the help of ropes and stakes will help you clearly designate the front of the work, calculate required amount Sections, designate the places of future columns. The length of each section is 200 cm, so the distance from one post to another will be 205 cm. Place for columns We mark stakes, and with the help of a rope, check how much your fence will stand.

Unloading building materials. The concrete fence sections have a weight of about 70 kg. The same post weighs 90 kg. When unloading, you will be very important to take into account and take measures to facilitate the laying process. If you decorate sections and columns along the entire workstation (future fence), then you significantly reduce the installation time, and physical exertion.

Installing columns. This systems do not require the fill of the foundation. Originally install the very first post and the latest. After that, all the subsequent, strictly in the outlined places are bought. If the terrain is uneven, then the height will possibly be adjusted by the height of the columns.

Sections are installed in special grooves located on each column. The lowest layer from below can be chosen to rubberoid.

If desired, the finished sectional fence can be painted in any color using special compositions for facades for painting.

Despite its high-cost, brick fences are still very popular. A very large range of bricks encourages all new and new designs of each brick.

Advantages of brick fences

• Strength;
• Reliability;
• Durability;
• Fire resistance;
• Beauty;
• Fundamentality.

Now it is customary to pick up a brick for a fence, under the brick, from which the house was completed - one thing complements! The fence can be solid and with forging elements, lattices - all at your discretion.

Where to start the installation?

Perform a fence drawing (let the primitive), it will help to calculate the right amount Building materials. Mark on the plane points of the places of columns. Position the location of the fence on the site. With the help of a cord and stakes to place the places of columns. Do not forget also place a place for future wicket and gate! Thoroughly free all the corners, each angle should be exactly 90 degrees!

The foundation is the basis of your fence. How much you are correctly putting it, your fence will be so stable and stronger. Initially, you should dig a trench for the foundation. For belt Fundament The trench will be ideal for at least 40-50 cm. But, the higher the fence, the deeper and wider the foundation should be laid. IMPORTANT: FOUNDATE Pullets immediately all, otherwise the joints will crack and the design will not be so durable.

Before pouring concrete into the trench, you should prepare a place for the foundation - to lay the so-called "bed". For her, on the bottom of the trench, you must first fall asleep sand, then gravel, everything is thoroughly pouring out of the hose with water and pretty tight. After that, make a formwork, lay the reinforcement. Formwork poured concrete, follow the level. We give the foundation to dry well and acquire the necessary strength. After a week, formwork is allowed to shoot.

Laying of a brick fence. Upon the top of the foundation, be sure to move the rubberoid layer, it is fixed with liquid glass and cement mortar. Every 2 - 2.5 m lay out the posts 25x25 cm. Between the columns, the base of 50 cm is stacked in height and 25 cm thick, above - the usual masonry into one or pollipich. For the fence sufficient will be masonry in one brick. But if you put a high fence, then it is best to put it in two rows. At your discretion, lay out openwork, single-row or combined masonry. When laying, be sure to follow the level! At the end of the masonry, make the shavy extender, observing its width of 5-6 mm.

Video: Brick fences do it yourself

Fences from the grid Rabitsa - cheap and beautiful!

Most cheap option Fence! Even starting will cope with the installation! All installation work can be made in one day.

Pros of such a fence:
Ensures the ventilation of the site;
Durability - service life up to 30 years;
Efficiency - Saving time, saving on labor.
Minuses:
The entire area is clearly visible;

1. Watch your site, with the help of stakes and cord, mark the future location of the columns and grids;
2. Dock the pits under the columns. The columns can be both metal and concrete, and wooden will come in the most simplified versions.
3. Depending on the soil, take care of strengthening columns. If the soil is dense, reliable, it will be enough to light up a column to a depth of 60-70 cm. But if there are any features - be sure to prepare the pits. Put on the bottom at first sand, and then gravel, insert at the right corner of the column (using a level) and pour it with a cement solution.

4. Tension the grid and secure it to the columns. Wooden columns Rabita can be attached with nails, wires. But to the metal and concrete to attach the chain challenge to special fasteners. However, the most popular type of attachment to any columns is all the same wire.

5. With the help of reinforcement wire, stretched between the grid cells, you need to pull the grid to prevent its sagging. Tensioning the reinforcement wire is recommended both from above and below the mesh.
6. To protect the challenge from corrosion of the metal, it is necessary to proceed well the cells of the grid any oil paint On the olife.

Fence from professional flooring with their own hands - an inexpensive option

Profile fences are also very popular. A large assortment metal profiles And the huge color gamma contributes to. In the presence of building materials and required tools The work will not take much time and strength.

• Sheets of professional flooring;
• Metal poles;
• Transverse lags (2-3 pcs. For each section);
• Screwdriver;
• Self-tapping screw;
• Level;
• Welding machine;
• Sand;
• Gravel;
• Cement mortar.

Front of work:

Always and everywhere, when installing any fence, you need to place the location of the fence and columns, as well as the presence of wicket and gate.
Under the columns try or dig holes with a depth of 1-1.2 m.
With sand, rubble and water prepare a pillow under each column. The height of such a pillow should be about 25 cm.
Prepared metallic columns with a cross section of 50x50mm. Install in bored holes directly to the gravel pillow. Align with the level of columns and fill their base with cement mortar.

With the help of self-sufficiency, attach sheets from the professional flooring to the resulting carcass. But the best option Fastening professional flooring to lags will be special rivets for metal. Using them, you will protect your new fence from intruders' encroachment.

Installing the fence from corrugated, quickly and cheap

After reading this article, I hope you have ripe the plan to arrange exactly your site and you finally have been able to make the right decision regarding the material for

Accustomed to fence outdoor territory fences around the whole house. The fence serves as not only protection against outsiders or animals, but also has decorative value.

Fences Before apartment houses Also became popular among city inhabitants. This gives the courtyards comfort and security from random unfriendly passers-by or violent companies, in fenced yards of safer to play children and parents can worry about them.

The choice is yours. The construction of a fence near the house is a fairly light and low-cost process and if you do not violate the norms of laws, you can easily build a fence on your own.

For what reasons, the tenants decide to establish a fence around apartment buildings

1. Limit access to parking lots in the yard (especially if those stand on the lawn or interfere with pedestrians)
2. Secure the yard from homeless animals and people
3. Limit travel through the yard of other cars

To ensure the legality of the installation of the fence around an apartment building, it is necessary to coordinate the project with residents of the house, as well as with some city services:

• State inspection architectures-system surveillance;
• Main Department of the Ministry of Emergency Situations in the region;
• Mountains Police Management;
• Mountains emergency ward.

Do not forget that when installing the fence around an apartment building, the fence should not interfere with the ambulance travel or fire Machine In case of trouble. If the project of the fence is not agreed, the fence can be demolished in whole or in part.

Fences can either completely restrict access to the courtyard of the house, or partially block the passage to lawns, to the entrances, playgrounds, and so on.

There are several types of fences around an apartment building.

Each them determines how much access to the yard will be blocked.

Each type of fence has its pros and cons, but what about them better?

If we compare fences in strength, here without a doubt, the palm of the championship goes to the monolithic stone fence or reinforced concrete.

Averaged strength from the fences from iron lattices and sheets. But choosing them, it is always worth remembering that atmospheric precipitation and humidity can damage the designs. The lowest durability of wooden fence and metal mesh. Remember, designs that can be collected and disassemble are always more vulnerable than once and forever fixed.

Also, defined with the type of fence, it is necessary to take into account the life of its service. And here again we would recommend brick, or - their service life comes to 40 years. The life of the metal grid is not more than 20 years. The iron grille will last 15 years, and the boarding fence is up to 10 years. As we see, while brick and stone structures leading.

However, stone and brick fence It will be more expensive than all other options. And the price, if neither cool, the most important condition. If you repel from it, it is worth paying attention to fences from iron grille and polymeric materials. The cheapest will cost, of course, a wooden fence.

In addition, of course, it is impossible to bypass and appearance The future fence, because everyone wants the fence to not just separated the territory from the street, but also pleased the eye. Here you can advise various combinations - if the reference pillars are made of one material, and the spills between them from the other - it will already look very original and aesthetically.

Especially if the spills are some corrugated, braided, decorated with some elements of the decor and so on.

The steel grid is hardly creating a feeling of aesthetics, it is best to look at the spills from various lattices and an adhesive fence that can combine any patterns on which your imagination and money is enough.