"The woman is created for a man, not a man for a woman" - such a postulate ...
Today there are many ways to finish ceilings in residential and public premises. This is a classic whirlpool, and the salary of this surface with wallpaper, and stretching and suspended structures, including multi-level. may be rack (metal and PVC), drywall, from plastic panels, Tile (type "Armstrong"), cassette.
Each of the listed types of ceiling structures undoubtedly has its advantages. If you want to choose the most budget, but the option is practical and possessing certain aesthetic advantages, you can stay on a suspended ceiling from plastic panels. Such structures are particularly popular in the bathrooms, kitchens, hallways, loggias, garages. About, from plastic panels, and will we are talking in the article.
Features of PVC panels
The decorative PVC panels are a hollow structure arranged by the type of cells, with more and, accordingly, air cells inside. The plates are equipped with locks around the edges, representing from one side - the comb, and on the other hand. Thanks to this device, it is possible to easily and high qualityly dock them.
The main advantage of this material is moisture resistance. In addition, the plastic panels are hygienic, because they do not contain pores on the surface, and therefore they will not be able to inhibit mold or fungus. The hostess is very appreciated how easy and simple is to care for this material: it is quite occasionally wiped with a rag, moistened with soapy water. That is why make the ceiling in the kitchen with plastic panels - a very attractive option.
Manufacturers guarantee the service life of plastic panels for at least 10 years. In fact, if everything is done correctly, the ceilings will preserve much longer without loss of quality. Plastic is frost-resistant, able to withstand significant temperature differences, not subject to rotting, pests are not terrible.
The advantages of the ceiling PVC
If it's time to update repairs in the apartment, but I want to do with lowest money and strength costs, not to breed a lot of dirt, it is worth thinking about how to make a suspended ceiling of plastic panels, because the process of its installation is quite simple and will not require any special tricks. During operation, if such a need arises, it will be easy to replace one or more panels to new ones.
Another advantage is a wide selection of coloring panels. They can be matte or glossy, with a pattern or monophonic, imitate natural materials: Metal, stone, wood and even a mirror. There are plastic panels for both ceiling finishes and walls. It is not necessary to confuse: the latter are distinguished by greater rigidity and weight, therefore they are not recommended to pray for the ceiling.
Plastic panels - finishing materialhaving a very democratic cost. Plus, it is possible to save on the brigade of the repairmen: the material is easy and in processing, and by weight, and the idea how to make the ceiling itself from plastic panels - is very real performed. If you make the design of the mounted, then the resulting clearance can be used to hide communications, the arrangement of additional noise and thermal insulation, point lamps. Besides, in apartment houses There are such essential defects of ceilings - cracks, cracks, levels of level, - what to try to even try this disgrace, it is better to think better about how to make ceilings from plastic panels.
Environmental safety material
Plastic, of course, the material is not natural, but it is considered absolutely safe for humans. Indeed, PVC found very wide application In everyday life, industry, medicine. Nevertheless, make the ceiling in the room with plastic panels - not the most best idea, especially if it is a bedroom. The advantages of this material will be more appropriate in other rooms. For example, you can make plastic panels. If you choose glossy bright models for this, it is capable of visually expanding the size of the bathroom.
Disadvantages of ceilings from plastic panels
Before seriously thinking about how to make ceilings from plastic panels in the apartment, you need to have an idea not only about the advantages, but also about certain shortcomings this material.
Plastic burning does not support and fades, but at the same time smokes and highlights toxic substances. No wonder in public and administrative buildings And the premises are forbidden to separate with its help the path of evacuation during the fire. Plastic panels - the material is quite fragile, it is easily damaged at shock loads. In principle, such an impact does not threaten the ceiling, but it should be found in mind in the process of transportation and installation.
Another lack of ceiling finishes with decorative plastic panels in the fact that the original design does not build from this material, but it looks quite rustic. However, if we competently think about the design and combine during the repair process various materialsFor the result it will not be ashamed.
The junctions between the panels will always be visible, even with the most accurate mounting. But sometimes it is even welcome: for example, if the material imitating wood is used. The economical models of plastic panels have a flap with time to burn out, so it is better to choose better material.
How to make a mounted ceiling of plastic panels: Preparatory work
Special preparatory workActually, and not required. It is enough to brush out from the ceiling dust and web, clean the places where the plaster is peeling. You can scold the most deep cracks. But it is especially known to be needed: new ceiling Close all defects.
What is really important is to make sure that there is no mold and fungus, and project the surface with special antiseptic compositions that prevent them from occurrence. For convenience, it is worth the maximum to free the room from the furniture, remove the curtains with the curtains, remove the carpets. However, there will be no special dust.
Purchase of the ceiling panels
Before finding out all the nuances of how to properly make a ceiling of plastic panels, and embody these knowledge of life, it is necessary to make calculation of the number of materials for the future ceiling. Knowing the values \u200b\u200bof the area of \u200b\u200bthe room and one plastic panel (this value is indicated on the package), it is not difficult to calculate the number of plates, separating the first number to the second and rounding the resulting value in the most side. It is unreasonably purchasing materials without stock: after all, the panels will have to trim, or marriage will fall, or something cannot happen from the first time - so such moments should be foreseen. As a rule, standard plastic panels have a width of 24 cm, and 3 m long, but other options are also possible.
For select PVC. It is necessary to pay attention to their quality. The edges should be smooth, without chips, burrs, and the drawing is uniformly. The high-quality panel can withstand repeated bending at the same place without cracking. Stiffness edges should not be visible on the front side of the panel. It is necessary to check how easily the two plastic strips are connected between themselves and whether the gap between them remains.
Materials for the carcass
In addition to the actual PVC panels, metal profiles or a wooden timber will be needed for the ceiling arrangement. From these materials it will be necessary to build a crate to which the ceiling panels will be attached. Profiles or a bar are fasten both around the perimeter of the room, and in parallel one of the walls in 50-60 cm increments. If you decide to arrange the panels perpendicular to the window to the window, so that the joints are not visible, then, therefore, the ceiling planks should be fixed along the wall with the window. .
The number of guide profile is easily considered: this value will be equal to the perimeter of the room. With ceiling boards more difficult. Will have to draw a room scheme on the scale on which to hold the right amount parallel lines denoting frame for ceiling plates, and make careful calculations.
It also takes a decorative PVC baguette (collapsible or monolithic): With it, it will be possible to close the joints of the surfaces. In addition, the ends of the ceiling panels are refilled in the groove of this plinth.
Fasteners and tools
For fastening the frame and plastic ceiling plates, you will need a dowel and self-tapping screws, the number of which is calculated taking into account the fact that for every half meter of the profile or panel one fastening element. Ceiling planks are fastened with direct suspensions, located on average, 70 cm each other, and for this you will also need a dowel.
Now about the instrument. It is necessary to have: drill, perforator, screwdriver, hacksaw for metal, construction level, roulette, ruler, pencil, and, of course, a stepladder.
Installation of the carrier frame
It should be noted that the entire installation process can be divided into two stages: the framework of the frame and the assembly of the ceiling. First you need to determine the size of the gap between the basic and suspended ceilings. It depends on what is planned to be placed in this interval. Perhaps these will be point lamps, and then it will take at least 10 cm. To pave the wiring, enough and 3-5 cm.
By determining the lowest angle of the ceiling using the level, from this point and the report should be conducted by conducting a line in the perimeter of the room. This markup will be a guide for fastening a guide profile, to allow that you need to be very tight to the wall, without cracks and emptiness. Having in mind that the ceiling frame strips (for them there is a less rigid profile than the one that is fixed around the perimeter) will be perpendicular to the plastic panels, they are installed in 50-60 cm increments, inserting the ends into the guide profile and fixing on the suspension every 70 See Focusing when installing it is possible through the lining room stretched through the room.
In principle, to build baking frame It is possible from wooden barwhich is attached directly to the basic ceiling, but only if it is not about rooms with high humidity. Anyway wooden elements The frame is to pre-process the antiseptic. If we consider that the ceilings in modern apartments Most often uneven, set every wooden slaughter strictly horizontally will not be so easy.
At the frame mount, you should think about the electrician and do not forget to bring wiring in the right places. The frame must be strengthened at the location of the lighting devices. Next to the perimeter of the room to the guide profiles fasten the decorative baguette PVC for the ceiling panels: entirely, if the model is monolithic, or its removable bar, if the plinth is collapsible. In this case, its decorative part is set after the ceiling assembly.
Installation of PVC panels
When the frame is ready, start assembling the ceiling from the wall. Pre-remove the protective film from the ceiling panels. The first plate is boated in the grooves of the plinths - both longitudinal and transverse, after which they fasten it with the help of self-skeins to the frame. The following is set in the same way, the exception that instead longitudinal groove Plinth fastening takes place to the next panel. Each subsequent panel easily snaps into the grooves of the previous one, after which the self-drawing is attached to the crate. Plastic panels are pre-trimmed in such a way that their length is 5 mm less than the corresponding size of the room. Holes for lamps in the plates need to be done in advance. If the mount is produced on a wooden crate, you can use brackets instead of self-tapping screws, but this is not a very reliable option.
When installing panels, accuracy should be taken, bending them on the arc is not too much to prevent curvature. The last panel is likely to have to be previously cut to the desired width. It is not necessary to fix it - it is not necessary - it will be enough to consolidate it in the grooves of the previous panel and this work with a sufficient degree of skill is carried out quickly.
There is another way of how to make ceilings from plastic panels --Carks. In this case, the panels are sitting on liquid nails directly to the ceiling. But this option requires a perfectly smooth base surface, and therefore it is not always acceptable.
Plastic panels for ceilings are a good alternative plasterboard structures. Easy in installation, durable in use, they perfectly mask the defects of the ceiling surface and attach an attractive look. Mount will not be difficult if you carefully examine the technology.
So that in the process of work is not distracted in search, everything required tools And the materials should be prepared in advance:
The level is better to use water, so the markup will be performed faster and with greater accuracy. The framework from the rails can be mounted only in a dry room, in the bathroom or in the kitchen it is better to fix aluminum profile. If the ceiling length is greater than the length of the panels, the H-shaped connecting molding will additionally need. Its design allows you to securely secure two adjacent panels and avoid sagging in connecting places.
Calculation of the number of materials
Planning, it is very important to correctly calculate the number essential materials. This will help avoid unnecessary costs and reduce the amount of waste after repair. To begin, it is necessary to calculate the ceiling area, multiplying its length of width. Similarly, the area of \u200b\u200bone panel is determined, and then the ceiling area on the panel area is divided and rounded the resulting value into the biggest side.
Since during the installation there will be cropping panels, and the material may not be enough, it is recommended to increase the ceiling area at least 10% in the calculations. If the ceiling surface has a complex configuration, it is better to add 15% on trimming. In addition to panels, they will need and slats for the frame; To find out the total length of the ridges, you need to divide the ceiling width by 0.3 and multiplied by its length.
When fastening the rails to the ceiling, the dowels and self-tapping screws are located at a distance of 40 cm from each other. The starting profile is attached every 0.5 m. Knowing the length of all the rails and profile, calculating the number of fasteners will not be difficult. total length The profile UD is equal to the ceiling perimeter plus 10% on the joints. The same length should be ceiling plinth. The consumption of the primer mixture is usually indicated by the manufacturer on the package, so when buying you need to know the ceiling area.
Important moment: buying plastic panels, you should immediately check their integrity in the package and the lack of defective elements. It often happens that by printing at home the purchase, people discover the defective, curved or broken panels, which are very difficult to achieve free replacement.
Installation technology plastic ceilings
The connection of the panels is quite dense, but not hermetic, and therefore the smallest particles of dust, lime and plastering from the ceiling surface can penetrate the seams. In addition, on the ceiling, especially in the corners, mold often appears, and the disputes of the fungus also enter the room and inhale people. To exclude such troubles, it is necessary to prepare everything correctly.
It is not necessary to align the ceiling, but it is necessary to remove the penetrating pavement or plaster. It is best to go through the ceiling with a brush with a rigid bristle, and then wipe with a damp rag from dust. Cracks and through holes or cement mortar. At the end of the ceiling twice the anti-grapple composition of deep penetration.
Prices for mixtures for alignment of walls and ceilings
Mixtures for alignment of walls and ceilings
Markup for starting profile
For the ceiling to be smooth, the panels should be located in one horizontal plane. To do this, around the perimeter on the walls produce accurate marking for the starting profile. Depending on the curvature of the working surface and the thickness of the wiring from the ceiling, down to 5-10 cm are retreating. They marked the point on the wall and the level marking starts from it. Tags put in each corner and in the middle of the walls, and then combined with a blank.
Fastening UD profile
TO concrete Walls The starting profile is fixed with a dowel-nail or anchor bolts, pre-drumped holes over the markup line. TO wooden surface The frame is screwed by long self-drawing. The mounting step is equal to 50 cm. The profile is applied to the markup, they are horizontally horizontally and fastened. In the fields of joints, as the entire length, there should be no gaps between the wall and the profile.
Montage Karcasa
The slave racks are located parallel rows every 30-40 cm. First draw straight lines, retreating from one of the walls 30 cm. According to these lines, with a step of 35-40 cm, metal suspensions are screwed into the ceiling. On the suspension is mounted a doomlet from the profile or rails, the ends of which are created in the starting profile around the perimeter, then the design is checked construction level. All items must be strictly in the same plane, any irregularities and deviations from the horizontal will lead to ceiling deformations.
Laying electrical wiring
When the frame is securely fixed, proceed to the installation. Carefully think over the location of the cables, the output points of the lamps, ventilation canals. Each system should be isolated from the rest, and cables, hoses and wires are neatly fastened into the beams by plastic clamps. It is desirable that the wires are in the corrugation and firmly attached to the ceiling; Wiring elements sagging is unacceptable. Where the lighting device is installed, you need to additionally strengthen the crate of the guides. In conclusion, the horizontal and strength of the fastening of the crate, the absence of parts protruding beyond the framework of the framework.
Prepare L-shaped bar and first panel: measure the distance between the walls and cut the plastic with hacksaw. End of extreme planks are trimmed at an angle of 45 degrees. It should be borne in mind that the panels are attached perpendicular to the guide profile. First mounted L-shaped bar; It is fixed by self-draws to the rails located around the ceiling perimeter. The side of the side where the casing will end, the bar is still not needed to fasten. Next, the first panel of one side is inserted into the profile by holding it in a horizontal position along the entire length.
If the ceilings have large square, It is better to work with the assistant, since it is quite uncomfortable to keep the panel to the weight and at the same time. The free side edge of the panel is fixed with self-proofs to the carrier profile or raiks. Slim plastic can be mounted on wooden guides with construction stapler. Each subsequent panel is mounted in the same way gently inserting ends into L-shaped strips.
When using panels of small length, transverse seams are recommended to shift in chess order. So the ceiling will look more attractive. The trimming of each element is performed sequentially as soon as the previous one is fixed. This helps reduce the consumption of material and a more accurate fit of the joints.
When installing panels in the places of electrical wiring in plastic, the openings of the desired diameter are pre-cut. You can do this with a sharp stationery knife. The latter bar first is adjusted along the width of the hole, then inserted into the L-shaped profile, and its edge is wedged with glue and insert into the ceiling. If instead of the profile it is planned to use the ceiling plinth, the edge of the panel can be fixed with self-drawing - there will be no them under the baguette.
During the sticking of baguettes, it should be very careful to apply them to the ceiling so as not to stain plastic. If it happened, it is necessary to immediately wipe the glue with a clean cloth, because it is quite difficult to clean it after drying. On this, the installation of a plastic ceiling is considered completed.
Prices for popular finishing wall panels
Wall panels
Video - plastic ceiling with your own hands
To create an individual style and give a certain aesthetics to the room, you need to know how to make a ceiling of plastic panels. Thanks to the availability of building material and its simplicity of its installation, plastic panels gradually displace from the market traditional methods Finishing ceiling coating.
Today on the market building materials A wide variety of plastic panels is presented. They can be both narrow and wide, both monophonic and have a textural pattern. Thanks to different color shades, you can choose the material to almost any interior.
So that the ceiling from the PVC panels look beautiful, you need to install them correctly. For mounting panels do not need special experience and any special skills. It is enough to be able to keep the instrument in your hands and have a desire to transform the interior. The ceiling decoration with plastic panels is much more profitable and more expedient than the use of traditional construction mixes and materials.
This is affected by several factors:
- Plastic panels are easily attached;
- Not exposed to moisture and light;
- Have low cost, due to which they provide a budget option repair of the room;
- Easily clean;
- When installing panels there is a minimum of dirt and dust;
- Absolutely safe for health, since they are made of environmentally friendly materials;
- When they are installed, there is no need to carefully align the surface, since they are attached at a certain distance from the main ceiling, which allows to hide defects and irregularities that are on the ceiling;
- There is an opportunity to install small point lights and hide everything passing through the communication ceiling.
Most often, plastic panels are used when installing the ceiling in the bathroom, in the kitchen, on the balcony, sometimes in the corridor. Separate the ceiling in the bathroom with plastic panels can be independently with your own hands. Installation of panels is simple enough.
They are attached to the main metal carcass Using ordinary self-tapping screws.
How to make a ceiling of PVC panels do it yourself
Starting repairs in the bathroom, it always seems that he will be infinite. A bunch of garbage, endless finish and grinding of walls, their painting, the ceiling whitewashes - not only able to cause a negative attitude to repair, but also lubricate the final impression of work. Often, people when repairing a ceiling in the bathroom turns to specialists who quickly and competently make all the work. However, with plastic panels, you can easily make the ceiling repair in the bathroom yourself.
To make a ceiling of plastic panels, you will need:
- Plastic sandwich panels from PVC material;
- Perforator;
- Screwdriver;
- Metal guides for the frame;
- Metal thread knife;
- Special glue - liquid nails;
- Dry rag;
- Ceiling plinth.
Before starting the installation of plastic panels, it is necessary to apply a clear markup on the ceiling, measuring exactly the same distance from the floor to the level of the alleged ceiling. This must be done in order for the installed panels to be smoothly and the surface remained perfectly smooth.
Simple algorithm: how to make a ceiling of sandwich panels
To install the ceiling of the panel sandwich, first need to mount aluminum guides to which the remaining panels will then be attached. For this metallic profile Cut into pieces of the desired length and is attached to the perimeter of the room with a certain indentation from the main ceiling. To the wall such a profile is attached to a dowel. It is necessary to install metal guides very tightly, because they will continue to hold the entire design of the ceiling.
The entire process of installing panels consists of several stages:
- The first panel is attached to the finished frame, usually begin to mount from the corner;
- The following panels are attached to the previous one with the built-in lock and are screwed to the frame of self-drawing;
- Set the panels are completely close to each other so that no cracks remain. If the cracks are still formed, you need to smell them with a sealant in order to avoid the free passage of air through them;
- Installation of panels is performed to the opposite corner;
- The last panel requires special attention: It is cut under the size of the remaining space and is attached to self-drawing to the metallic profile.
As a result, subject to these simple rules You get a smooth ceiling that will delight you with your novelty.
Instruction: How to make a ceiling of plastic panels
As noted above, the installation of plastic panels can be safely produced independently. This does not need any special skills. All stages on the installation of plastic ceiling are quite simple and understandable. It is only necessary to very accurately and clearly extort the distances and select the sizes of panels and guides.
Self installation ceiling of plastic will give you pleasure:
- After all, the material used is easy to process, not dirty,
- Installation takes at least strength and time;
- The result exceeds all expectations, despite the simplicity and cheapness of the materials used.
For independent installation plastic panels can be created by your individual image of the room and original style. After all, you can install the panels not only strictly vertically, but also at any angle, creating uncomplicated drawings in the form of a Christmas tree or placing panels diagonally.
Installing plastic panels when proper approach takes 1 day. The main work is to right fastening Guide profile.
Plastic panels can be installed in the bathroom - this is the most popular place for such a finish. Also, installation can be carried out on the balcony, corridor, kitchen. Plastic ceiling It makes it possible to install small point luminaires instead of bulky chandeliers and lamps.
Tips how to properly separate the ceiling by plastic panels
So that your ceiling looks beautiful, you need to follow a few simple rules.
Namely:
- Exactly install metal guides, firmly flexigating their wall;
- Pick up plastic panels for the color of the surrounding interior;
- Determining the dimensions, cut them with the necessary length;
- Installation of the joint in the joint with the previous panels;
- Special attention to pay the last panel, measuring it in size and correctly attach to the guides.
How to install PVC panels on the ceiling (video)
As you can see, the installation of plastic panels on the ceiling is a very simple lesson with which anyone will cope. With such panels, your apartment will acquire an individual image and will delight you every day a unique interior.
Did you look at your ceiling and came to the conclusion: is it time to change something? Think about plastic panels. Extreme convenience in the installation and solid decorative potential allowed them to firmly settle in the building materials market, along with tension ceilings. Do not know how to make the ceiling yourself from plastic panels? To help our article-instruction with a detailed story about each stage mounting work like type.
Before proceeding directly to the description of how to make a ceiling of plastic panels, it is necessary to affect the question of the material itself. It is no secret that today PVC is actively used to decorate both ceilings and walls. However, not every owner's rehabilted repair knows that there are as wall, So ceiling Panels.
Externally they practically do not differ, but here technical characteristics Parity can not be: walls a little heavier ceiling and when used on the ceiling, they give a significantly laload on the mounting frame.
They can also have a different texture. Wooden is one of the most popular.
In order to prevent such troubles, it is best to use them according to functional purpose. Ceiling panels have thinner walls, not so tough and specially facilitated for more comfortable installation and subsequent operation.
By type of surface, plastic panels are divided into:
- glossy - Recommended for premises with a small height, allow you to visually lift the ceiling due to the mirror effect
- matte - require more Luminaires or an increase in their rated power for the optimal distribution of light in the room
There are also panels with a rough surface made by the pattern, but this is already extremely tasteful, designed for people with certain aesthetic requests. The choice of one or another surface is, of course, is important, since it directly affects the final result of the finish. However, it is equally important to decide with the size of plastic panels that you intend to install on the ceiling.
- Rachet - Narrow panels that are most reminiscent of the lining, many impreams exactly such an effect, as it helps to create some saturation indoors
- Seamless - The most common if you want to make a ceiling of plastic panels of this type, then you will get almost a solid, monolithic canvas, the seams - barely distinguishable and all the "fault" special grooves, with which sheets are collected.
- Leafy - Geometrically correct, used to finish nonlinear surfaces, can be both square and rectangular.
Defined with the type of panels? Wonderful! Let's try to calculate required amount Material and profiles, without which to make a ceiling of plastic panels, alas, will not work. 
- We multiply the length of the room in which the repair is planned, on its width and get the ceiling area.
- We divide the resulting number on the area of \u200b\u200bone panel and add approximately 15-20% - these pieces will not be superfluous, but they will go on trimming.
- Determine the number of UD guide profile, which is mounted around the perimeter (divided rogue meters For the length of one plank, the result obtained is rounded to an integer)
- Determine the amount of CD rack profile, which is mounted perpendicular to (every 50 cm - 1 pc.)
Specialists persistently recommend the first option if you want to make a ceiling of plastic panels in the kitchen or in the bathroom, as the tree is absolutely not suitable for use in rooms with high humidity.
Now prepare the tool and everything else that should come in handy in the work. In order to make a ceiling of plastic panels at home, without resorting to the help of a special mounting brigade, you will need:
- level
- fastener Planck
- ceiling plinth
- selfless
- dowel with screws
- screwdriver
- perforator
- scissors for metal
- malyary cord
- glue or liquid nails
We carry out markup
Using a water level, determine the exact location of the UD profile. To do this, first with the help of the level of the level, determine the lower point and retreat from it for a distance that makes up a little more profile thickness. Next steps logical: make marking throughout the room, and to speed up this tedious process, use the painting thread. With it, take off the solid line and set, thereby, the benchmark for installing the ceiling profile.
Fix the ceiling profile
With a perforator or drill, prepare the holes in the wall for the subsequent attachment of the UD profile. Please note that the distance between the holes should be not more than 1 m. Focusing on the markup, carry out the guide profile using the screwdriver. 
If you have successfully overcome this stage, congratulations - your doom is ready. Do not forget to carry out the wiring - in order to normally put the cable, use the metal casing or plastic. Fixing it to the ceiling should not cause any difficulties.
Mount the fastening bar
We continue the story about how to make the ceiling itself from plastic panels, and proceed to performing very an important stage. One of the sides of the fastening plank is attached to the crate, and the second has the appropriate groove. 
It is in it after and inserted without any problems the ceiling plinth. The bar is fastened all over the perimeter by self-draws. They screw in the middle of its side surface. How many screws to use? Observe a step at least 25 cm.
We carry out installation of plastic panels
Riding the panel in the groove of the fastening strip, diligently align and fix it with the CD's racking profile with screws. Special difficulties on initial stage You should not: each panel easily enters the groove of the previous, already installed panel. 
Difficulties may occur only with the final panel. It needs to be stabbed under the desired size and make holes for fastening to the crate. With the help of a screwdriver to attach the final bar to the CD racking profile.
Strengthen the crate for lamps
It seems that you already know almost everything about how to make a ceiling of plastic panels. However, you should not forget about some manipulations, from the success of which your future comfort directly depends on the success: places where the installation of lamps is planned, it is necessary to strengthen additional profiles in advance and remove the wires through the holes.
Fix the ceiling plinth
The prepared ceiling plinth must be pre-cut off the width of the room where you install plastic panels. Next - to attach the corners to it and snap the finished plinth into the groove of the already installed fastener. 
Try to consolidate it correctly so that you do not have any such curvature, as in the image.
What should happen in the end? If you really learned how to make a ceiling of plastic panels, then the following photos will definitely correlate with your end result.
Photo: vk.com.
The use of a plastic seamless type panel for finishing is fast, attractive, practical and inexpensive option. A wide range of textures and panels of colors of PVC plastic panels will help harmoniously combine the ceiling finish with coating on the walls.
The image clearly sends the absence of a seam. , Mounting which will not cause difficulties, looks aesthetically attractive.
Advantages of PVC panels
Pros of the use of ceiling plastic ceiling panels:
- This ceiling is not afraid of humidity, drops temperature mode. Therefore, PVC panels are used in the inner, and in the outer decoration.
- Plastic is a material that does not absorb any unpleasant odors.
- If fat is falling on the plastic for the ceiling coating when cooking food, it is easily washed off with a sponge with soap solution.
Plastic from which panels are made, it looks attractive, practical and has many other positive characteristics.
In the markets of building materials are offered ceiling panelswhich caused the print of noble tree species. This will help finish with plastic panels of ceilings and walls in the hallway, living room, a room with a fireplace or a bedroom. In the decoration of the bathroom, bathroom and kitchen, the ceiling panels with a print in the form of a stone conntion look good.
What is PVC panel?
Polyvinyl chloride (PVC) is used for manufacturing a plastic ceiling profile. It is environmentally friendly, accordingly, it is not allocated out of it harmful substances. Before making a plastic panel, the powder is mixed in the mixer of industrial purpose, additives and plasticizers are added to it.
After kneading, a tough type of weight is formed, which is loaded into the extruder. Then, by pressing the window using high temperature through a specialized molding type, the ceiling profile of plastic is pulled out. Next on the conveyor using the guillotine panel is cut into size. After that, the profile ceiling plastic is sent to the workshop where the print is applied on the front side. Then B. finished video The material is packaged and sent to the warehouse.
Types of plastic panels
The ceiling profile of plastic is divided into suture and seamless.
Plastic forms seam when laying
It looks original, but not suitable for all rooms. When installing the profile ceiling, the material for the manufacture of which is plastic, is stacked so that there is a clear seam on the joints between the individual panels. By appearance The ceiling resembles made of lining. This causes that it is not suitable for all rooms. The seams ugly look at the ceiling in the bedroom, the hall made in the style of modern, classic or baroque.
Seamless plastic
With competent laying, such a ceiling profile of plastic gives a smooth, smooth and glossy surface. Byit comes for both the kitchen and a bedroom, and for the living room.When the ceiling coating is mounted, the docking seams are not visible. In order for the panels to be firmly connected one on the other, they are equipped with one of the sides by a specialized groove, and with the second - spike. The inner part of the ceiling profile from plastic is equipped with partitions that increase the strength at a break and have low weight. The lack of seams is the main advantage this type Ceilings, and in appearance they resemble stretch.
The ease of installation of the suspended ceiling of plastic, strength and other characteristics put it on the leading position in the decoration of such premises, like a balcony, loggia, bathroom, bathroom and kitchen.
Installing panels
In the ceiling of plastic profile PVC embedded lighting of any type. Power restrictions in this case No, unlike tension ceilings made from PVC film, where they make up 50 W. Plastic panels are not susceptible to burning, and therefore the ceiling profile from this material can be used in private boiler rooms.
Previously, the plastic panels for the ceiling during the fasteners always had seams on the joints, but then the seamless design appeared. Fastening them is similar, with the difference that the latter is closer to each other. The main thing is to make the frame under the panel plastic on the ceiling.
Wooden rails as a frame
The minimum size of plastic frameworks for the frame under the panel is 20 per 20 millimeters. They must be perfectly straight and smooth, bitch and cracks are unacceptable. This is due to the fact that deformed rails can break, and their extraction from the collected frame - the procedure is not simple. Guides set perpendicularly, with a step less than 50 cm.
Tip! The tree is processed by an antiseptic so that the framework serves as long as possible. This is especially true of premises with high humidity.
Initially, the rails are located around the perimeter of the ceiling or walls - they will become the basis of the carcass. To control the quality of the frame, the level and plumb will need. When fastening a frame, wherever she flies closely, you need to put additional bars. It should be fixed with self-reversal with a step of 40 cm.
After creating a perimeter of a tree for a frame for a frame to it, the guides are performed at a distance of 35-45 centimeters from each other. So that the design has not saved, every half-meter additional railings are fixed either to the ceiling or to the wall.
Plastic frame for ceiling profiles
Such material is more practical, but it costs more. Plastic frame is more sensitive to uneven surfaces walls. Its advantages is not an exposure to rotting and forming mold, high speed and practicality of installation.
Plastic guides are equipped with specialized clips. Installation can be done immediately, since the ceiling profile of plastic does not require any additional processing. Plastic guides have strictly perpendicularly. In most cases, such a framework is used in baths and paired or other rooms of small size, as well as in cases where the humidity is high, and the use of wood is impossible.
Metal Poll - Material for Frame
This material is applied in rare cases, since its value is high enough. The cutter for the frame is performed similarly to the one that is done under the ceilings from drywall.
The fixation is carried out to each of the metal products.
Initially, on the perimeter of the wall or ceiling, the starting ceiling profile of the P-shaped form is attached. Further, the guides are installed that are attached screws at a distance of 80-90 cm. After that, fitness fittings are performed, and plastic ceiling panels on it.
Installation of panels
In the right places, foresee the output for lighting devices. Seam can be with a junction or absent.
Cut the first panel by the desired size And fasten with the crest to the wall. Scores are attached to each of the frame elements through which it passes.
Press the first panel as close to the wall as much as possible and fasten the groove into the ledge to avoid the presence of a seam. The subsequent panels do hardly do on the desired size, but fastening perfectly the bottom side of the groove, as close as possible and with the observance of the rules, then the absence of seams at the joints is guaranteed. The final panel for the ceiling cut down the length and width, and the free edge attach as close as possible to the wall.
Ends installation installation decor. In this case, the plinth is used. It gives the ceiling an attractive and neat look.
Important! If the plastic ceiling profile is used instead of the plinth, then the installation is made in three walls, the insertion of the panels is performed in it. In such a situation, the last panel is placed on glue.
The final stage is to take edging of the ceiling coating by the plinth, which is attached to polymer glue or liquid nails.
Seamless glossy ceilings From PVC profile is a great option for interior design of the room. Visually the result looks like expensive stretch ceilings, only costs are less than less. The ceilings from plastic panels are a cheap and simple version of the interior design at easy installation.
Tips in the video on the installation of plastic seamless ceiling:
Does not miss moisture and looks stylish. On him and inside it will never be mold and fungus.
