Peeling skin can be caused by a variety of factors. To deal with ...
Surely you have heard from sellers such an expression as "running meter". This concept is confusing to many, because you cannot immediately understand how this measure differs from the usual meter, and what exactly is meant. Most often, this term sounds in response to a question like: "What will be the cost of a kitchen if I order it from your company?" And in response you hear something like: "450 dollars a linear meter." This can puzzle someone who has never bought custom-made furniture for home before.
A running meter - how much will it be?
In a nutshell, 1 running meter is the same as an ordinary meter, only we are talking about quantity. Yes, it’s about quantity, not length. In general, there is simply no such concept in official terminology. A running meter is a common expression.
In theory, the quantity of goods should be measured in conventional kilograms or pieces. But in practice, this is not very convenient. If you ask the seller to sell half a kilogram, what will he think of you? It is also impossible to measure a tablecloth in pieces, and counting how many in square meters is also not suitable. Therefore, this measure is so firmly entered into use.
If the product has a more or less constant profile (i.e. thickness-width, cross-section) or is supplied in a roll, then it is convenient to sell it by cutting off pieces of a specific length. This length is used to measure the quantity.
The nuances of using a running meter
A running meter is one meter of a product, regardless of its height or width. If the cost of products is expressed in this unit, then you just need to choose the most suitable color, texture, type of product and the appropriate width. After that, it remains to measure the fabric or the required number of running meters along the length. Payment will be made only for length, without any conversion in pieces or square meters.
There is a special conversation about furniture. Sellers like to indicate the price in running meters, while they specially take the cheapest fittings and material for calculations, and sometimes they may not even include the cost of fittings in the calculation. Therefore, you should not rush to suspiciously lucrative offers, because this technique is often used to get customers trivial.
How to determine the running meter of a kitchen?
Suppose you decide to order a kitchen, and you have been given a price of $ 450 per meter. What does this mean, and how to estimate the total cost? It is necessary to measure in the room the length of the wall at which the kitchen will be located, and add the length of the corners if its shape is not linear, but in the form of the letter "G" or "P". The result is multiplied by the price and the base value is obtained. Be prepared that it can increase by 1.5 times due to the countertop, more expensive fittings, the height of the upper wall cabinets (perhaps you have a high ceiling in your room and you would like the cabinet height to be maximum), the use of glass, the installation of an apron, etc. .d.
Therefore, before placing an order, you need to find out what is included in the named price, what material is taken for the calculation, be sure to specify whether the countertop is included, whether it will be matte or glossy, how many sections there will be, etc.
The weight of the reinforcement is a very important parameter both for the construction and for the construction of various buildings (for example -). The mass of metal elements must be taken into account when planning the construction of the building itself. The rods in free and stressed zones, the distance between the rods, etc. depend on it.
In addition, the cost of construction will depend on the weight of a running meter of metal stubble. It is cheaper to purchase metal rods at wholesalers, where the price is indicated per ton. The calculation in construction is carried out in linear meters. Therefore, it is important to be able to calculate how many meters of a rod are in one ton.
1 Table of correspondence of the weight of reinforcement for different diameters
The standard weight of reinforcement of a particular diameter is regulated by GOST 5781-82 standards. The table of standard size calculations looks like this:
This table is absolutely easy to use. In the first column, we select the diameter of the rod in mm, which will be used, in the second column we immediately see the weight of one running meter of a rod of this type.
Third column shows us the number of running meters of reinforcement in one ton.
1.1 Reinforcement weight calculation
The first and easiest way to find out how much a meter of reinforcement weighs is to use an electronic calculator for similar calculations.
To work with it, you only need to know the diameter of the rod with which we will work. All other calculation parameters are already included in the program.
Two other ways to find out how heavy is the meter of rebar is somewhat more complicated. Let's consider them in order of increasing complexity.
Since in private construction, reinforcement with a diameter of 12 mm and 14 mm is most often used, we will take just such rods as the basis for calculations.
1.2 An example of calculating the weight of reinforcement (video)
2 Calculation by standard weight
Let's calculate the number of reinforcement, needed for construction (provided that the table is at hand).
- Draw up a construction plan for the building, taking into account the creation.
- Decide on the diameter of the rods.
- Calculate the amount of reinforcement used in meters.
- Multiply the mass of one meter of reinforcement of the required diameter by the number of rods used.
Example: For construction, 2,322 meters of reinforcing rods with a diameter of 14 mm will be used. The weight of a running meter of such rods is 1.21 kg. Multiplying 2322 * 1.21 we get 2809 kilograms 62 grams (grams can be neglected). For construction, we need 2 tons of 809 kilograms of metal rods.
2.1 Specific gravity calculation
This method of calculation requires certain knowledge, skills and labor. It is based on a formula for calculating mass, which uses quantities such as the volume of a figure and its specific gravity. To resort to this method of calculating the running meter of reinforcement it is worth it only if you have neither an electronic calculator nor a table with GOST standards at hand.
Almost every person has necessarily heard the expression "running meter". For many, this definition remains quite difficult, since it is completely unclear what is the difference between square meters. m. from ordinary. What is the conversation going on?
One running meter is equal to the usual length of one meter. It is used to measure goods that have a specific width, such as linoleum. It is much easier to calculate the cost of a product based on running meters than to calculate the cost per square meter.
For example, you need to purchase a carpet in the store, 2.5 wide and a certain length. To make a calculation of 1 m2, such a segment is not very convenient. To do this, you need to determine the area of the product. Then divide it into squares. In other words, you need to perform difficult mathematical calculations.
It is much easier to carry out calculations on the basis of a linear one. To determine the cost of the goods, you will need to multiply the length of the carpet segment by the number of meters.
There is a fairly large list of goods in which the cost is calculated by the number of running meters. These include.
- Fabrics.
- Linoleum.
- Carpet.
- Finishing film.
- Rolled polyethylene.
- Electric wires.
- All kinds of pipes.
- Various fences.
- Fences.
Furniture calculation
A lot of consumers believe that the calculation in running meters refers only to roll materials. However, this opinion is not entirely true. When buying a product, we are often faced with a certain roll width. The cost of the furniture is often determined by the runners.
To make it clear, let's turn to the next example.
The furniture manufacturer has made a rough estimate. To completely fill a three-meter kitchen, taking into account all the details of the furniture, he will need 30,000 rubles. Consequently, the cost of 1 m of furniture will be 10,000 rubles. In other words, this cost will correspond to the price of one running meter. Based on such fairly simple mathematical calculations, the furniture manufacturer can tell the customer what the cost of a set of furniture of the corresponding sample will be.
However, it is necessary to take into account one important nuance. When calculating the price r. m, only the cost of the cheapest fittings and material was taken into account. Sometimes the cost of fittings is not included in the calculation at all.
Therefore, if a very tempting offer is made to you, it is imperative to find out from what material the product is made, what fittings are installed on it. In this way, new buyers are often attracted.
How many mm in running meter
As already mentioned, one running meter is equal to one standard meter. Hence, it turns out that 1 running meter is 1000 mm.
Cheat sheet
So, to make it easier to understand the units of measurement, they can be summarized in one table, in which their ratio will be seen, and it will be quite easy to transfer one unit to another.
What does the term "square meter" mean?
This unit is designed to calculate the area of a square, each side of which will be 1 meter. To determine the size of the area, you need to multiply the height and length of the product. The short form is used for designation - sq. m.
Today this unit is found almost everywhere in our life. The most obvious example is the size of a living space. In other words, if we are talking about an apartment of 16 m2, then the floor area is equal to this value.
The square meter is most commonly found in the construction industry. To determine the area of a wall that is 6 m long and 4 m high, you just need to multiply six by four. It turns out that the wall area is 24 m2.
Everything is measurable. It is a fact. But the quantities used are different. Most of the products that are rolled into a roll, which are related to fittings and kitchen products, are measured in running meters today. To be more precise, a running meter is how many meters in length. Width is not taken into account.
In one store, these stripes are in this form and lie. But in the other there is just one wide strip of 3 meters, 10 meters long. In fact, this is what we need. Since the cost is indicated in running meters, we will pay three times more in the first store than in the second. The savings are huge!
Remember, 1 running meter is 1 meter long. And then it doesn't matter what width. The price will not change anymore.
Carefully!
Very often, only the number of running meters and the price are indicated in the product information card. This means that we do not know anything about the width of the product. If you buy everything in a store or in a bazaar, then you can come with your own tape measure.
Such data is often hidden on the Internet. You cannot order a product without making sure its parameters. It is worth calling the store and finding out its width.
Having found two identical items with different prices, do not rush to order a cheap one. It is possible that the width of those products will not suit you.
The marking of the fabric is a matter, although not simple, but accurate. With kitchens, which are also measured in linear meters, everything is much more complicated. Usually, we take into account 1 meter of a standard headset. That is, simple cabinets and tables are always used for miscalculations. All additional decorative elements are negotiated separately.
If you buy a ready-made kitchen, then the information on running meters is not particularly important. You already see the ready-made price tag and decide if the price is right or not. But with individual orders, everything must be carefully considered.
It is important to emphasize that you can never know the exact amount in advance. We can only judge the minimum cost of 1 running meter of your future kitchen.
There are two popular situations in which the answers are completely different:
1. Exact calculation. You order an ordinary kitchen, where all drawers, cabinets and tables are of standard sizes. You don't change anything. The final price may differ slightly from the planned one.
2. Completely inaccurate calculation. The kitchen is completely original. All cabinets and drawers are designed for your convenience and size of dishes and furniture. The headset fits perfectly into the design of the room. The final price can be several times higher.
Why the total is growing
It is difficult to translate running meters. And for the sake of a new idea, you have to put up with the pricing policy. To cut costs, it is worth combining different components. That is, it is necessary to use as many standard elements as possible, diluting them with custom ones. This way you get a kitchen that fits well into the interior and save your budget.
Keep in mind that different materials and designs add value. One running meter of a locker can become more expensive if you decide to install not 4, but 5 drawers in it. Each detail requires additional expenses. Carvings or decorative stickers are far from cheap.
Alternative to running meter
Many stores calculate their prices based on ready-made kitchens. You choose the model you like, see its price, and then change it a little, if necessary. In such cases, it is easier to estimate a future purchase.
As a result, we see that a running meter is a quantity by which many goods are measured, from fabric to kitchen. It specifies the length without specifying the width. In order not to make a mistake in buying, you need to clarify all the points. If on the Internet they refuse to tell you the width, then you should not risk it. After all, you can just lose your money.
The concept of "running meter" often confuses people. Although there is nothing mysterious, and even more so scary, there is nothing in this phrase. Let's consider several options where this concept can be applied, and learn how to calculate the required number of running meters.
A running meter is the usual length in meters, but taking into account the width of any finishing or household material (carpet, linoleum, plastic or vinyl film). Let's say you have a room 4.5 meters wide and 6.0 meters long, and you are going to lay a new linoleum in this room. In the store, you need to choose a material that is suitable in quality and pattern and be sure to pay attention to the width of the rolls. The width of linoleum can be 1.5 meters, 2.0 meters or 2.5 meters. Since the width of the room is 4.5 meters, in order to cover it with linoleum, you will need to put several pieces. It can be three pieces of 1.5 (1.5m * 3 = 4.5m) or two - one with a width of 2.0 and the second - 2.5 (2.0m + 2.5m = 4.5m).At least three pieces of smaller width, at least two larger, should correspond in length to the length of the room (6 meters). This means that in order to cover a room with linoleum 1.5 meters wide, you need to buy 18 running meters (6 * 3 = 18). If you decide to lay linoleum 2.0 and 2.5 meters wide, then in total you need to buy 12 running meters - 6 meters wide 2.0 and 6 meters wide 2.5 (6 + 6 = 12).
Any other roll floor coverings are also sold in linear meters. But to cover the floor with carpet, it is enough to buy as many linear meters as the length of the room. The carpet usually does not fit, as is done when laying linoleum, so you need to choose the width that completely covers the floor.
You can buy by running meters both a film for finishing greenhouses, and a film for pasting any surfaces. You can calculate how much material is needed for pasting, for example, doors, in the same way as for laying linoleum. But in order to buy polyethylene for a greenhouse, you first need to draw on a scale on paper all its parts separately. Next, calculate the lengths and widths of all individual parts, and then calculate the running meters.
If you are going to buy ready-made kitchen furniture, it is also sold in linear meters. You will only need to add up the lengths of all the walls along which the kitchen will be installed, and then only choose the appropriate furniture option. In the case of kitchen furniture, in addition to the standard width, the cost of a running meter will include kitchen facades, internal shelves and drawers, as well as fittings. Please note that the cost of a running meter does not include the cost of the hob, oven and dishwasher.
A variety of cornices and pipes are considered linear meters - all those materials that require docking with each other. And in running meters, any fences are considered, for example, metal fences.
In order not to be mistaken with the calculation of running meters, it is better to come to the store with a drawn plan of the room. It should indicate the length and width of the room, and if it is a kitchen, then the height and location of windows and doors. Good luck with the calculation and repair!
How much is a running meter? This is an analogue of a conventional meter. A running meter is used when measuring length in situations where the indication of width or height can be neglected for one reason or another.
In construction, there is such a thing as "running meter". For many, this measure of length remains a mystery for a long time. We hasten to reassure you, there is nothing terrible, except for the expression itself.
Let's try to understand this concept and learn how to correctly calculate the required number of running meters.
Running meter. How much is this?
This measure of length measures what is rolled into a roll: linoleum, corrugated board, fabric, carpet. Also, this concept is used to measure the amount of material needed in construction, or it means the amount of work that needs to be done. For example, a running meter of a kitchen, pipe, baseboard, fence, tile, foundation, and so on.
FAQ
How many mm are in a running meter?
As already mentioned in our article, to calculate a running meter, the length of the material is required, since the width is already fixed and can be different. That is, in 1 meter 1000mm of the length of the product.
How many running meters are there per ton of reinforcement?
Calculating the number of reinforcement for the foundation in running meters. The measure of the amount of reinforcement is a ton. Therefore, you need to convert the running meter into tons and then look at the price. But how many meters of reinforcement are contained in a ton depends on its diameter: the thinner the reinforcement, the more meters per ton.
Let's say you need lumber. One square meter can have a different number of running meters for different materials (edged board, floor board, lining). This is because the number of square meters also depends on the width of the material.
For example:
The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. It is necessary to calculate as follows:
We divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of running meters.
1 sq.m. / 0.120 m = 8.33 r.m.
How much does a running meter of painting cost?
Most often, painters consider the volume of their work in square meters. That is, the length times the width of the surface.
Is one "running meter" equal to one meter?
Example - Measuring Structures
The second option for measuring the structure along the contour (outlining line) is chosen to calculate the cost of work.
The length of the structure is measured with a tape measure.
What calculations are made in running meters,
and which ones are in square ones?
If the amount of laminate, parquet or ceramic tiles required to cover the floor is calculated in square meters x, then the amount of linoleum or carpet is calculated in p / m.
Consumption of plaster, putty, primer, paint is calculated in kilograms per square meter. The consumption of wallpaper or drywall is calculated in p / m. To calculate the cost of work, calculate the cost of work per square meter.
The calculation of wallpaper for wall covering is similar to the calculation of linoleum.
Using the calculator below, you can calculate the dimensions of window slopes, which are taken into account when calculating the cost of repairs and purchasing consumables.
We are all accustomed to consider the unit of measurement of distance or length - meter. Then what is a running meter? How is it different from the usual one? Yes, in fact, nothing. It is customary to measure the length of any material in running meters. In this case, its width or height is not taken into account. They are either standard, or, when measured, do not matter.
What is measured in running meters
In running meters, you usually measure the fabric in the store. With a width of 1.5 m, a piece of fabric of 1 m by 1.5 m will be considered a linear meter. If you buy pipes, then, regardless of their thickness, the length of the pipe will be measured in linear meters. So is the electrical cable. It does not matter at all what section it has, whether it is thick or thin, its price is indicated per running meter. The same situation is with skirting boards, linoleum, various heaters and seals, etc. And when the cost of a kitchen is calculated in linear meters, what do you mean?
What is a running meter of a kitchen
In this context, a running meter is used rather as a conventional value. For the convenience of calculations, it is generally accepted that a running meter of a kitchen is that furniture that is installed along a 1 m long wall from floor to ceiling, according to the design project. These can be tables, shelves, cabinets and other modules. Usually, the cost of the kitchen is indicated in this way - per running meter. So it is convenient to immediately calculate its approximate price by multiplying the length of the wall along which it will be located by the cost of one running meter of the kitchen.
Each of us has had a chance to make repairs or acquire new furniture at least once in our lives. And quite often, when buying certain building materials, we heard about such a unit of measurement as a running meter. Such a concept confuses almost everyone, and it is rather difficult to immediately determine how this value differs from a square meter. You cannot find out what a running meter is from a dictionary, because this concept was invented by manufacturers of goods. But in this material we will figure out what this unit of measurement represents.
This parameter is the typical length of one meter for products with a specific width, such as fabric or linoleum. And it is much easier to calculate the cost of goods in linear meters than in square meters. For example, you need to buy a piece of carpet of a certain length with a width of 2.5 meters. In this case, it will not be very convenient to calculate square meters, because you will need to calculate the area of the product, and then divide it into squares. In general, perform fairly complex mathematical calculations.
With a running meter, everything is simple and in order to find out the cost of a product, you just need to multiply this unit of measurement by the length of the segment.
A running meter is most often used to calculate the cost of such goods:
- the cloth;
- linoleum;
- carpet;
- finishing film and polyethylene for greenhouses;
- electrical cable;
- finished furniture;
- various cornices and pipes;
- fences and metal fences.
Most consumers believe that only rolled materials can be calculated in running meters. And this assumption cannot be considered absolutely wrong, because in most cases we are faced with this measure when buying similar goods with a specific width. But the cost of furniture is often calculated in running meters.
Let's consider an example for clarity. The furniture manufacturer estimated that to fill a three-meter-long kitchen, taking into account all the cabinets, shelves, doors and fittings, it would be necessary to use materials for 30 thousand rubles. This means that one meter of furniture will cost 10 thousand - this cost is the price per running meter. And thanks to such simple mathematical calculations, the manufacturer can immediately indicate to the customer how much this or that set of standard samples will cost him.
But there is one nuance here, the price of the cheapest material and accessories is included in the cost of a running meter, and sometimes the latter is not taken into account at all. So if you see an offer that is too tempting, then it is worthwhile to find out more specifically about the content of the product. After all, this technique is often used only to attract new customers.
We know about what this unit of measurement is from the school desk. And remember that a square meter is needed to measure the area of various shapes. And in fact, this measure is relevant for measuring any building materials and furniture. And if the width of the product practically does not affect the running meter, then for a square meter, this value is of great importance. For example, you need to cover a linoleum room with a length of 3 meters and a width of 2.5. Through simple mathematical calculations, we find out that the cut is 2.5 * 3 = 7.5 square meters.
This unit measures:
- area of the room;
- area of flooring surfaces;
- area of facing materials;
- the area occupied by furniture.
As for furniture, this unit of measurement is especially relevant for small kitchens, where the area of the headset plays a very important role.
Quite often, when buying certain materials, we need to transfer one unit of measurement to another and vice versa. But how to do this, because a running meter is, in fact, a unit of measure for length, while a square meter is an area. Do not despair, because it will be much easier to do than it seems.
In order to convert a linear meter to a square meter, you need to find out the exact width of the product, which the manufacturer takes as standard. And if with the calculation of linoleum or carpet everything is quite simple - we divide one running meter by the width of the product and we get the number of square meters, then with the calculation of furniture you will have to tinker a little.
For example, in order to find out how many "squares" are contained in a standard kitchen 5 meters long. You will need to measure the width of the floor units, not the height of the kitchen set. Let's say it is a standard 60 cm (0.6 meters). Now you need to multiply these parameters among themselves: 5 * 0.6 = 3 square meters. In this simple way, you can calculate the area occupied by the kit and measured by "squares".
