The cheapest roof covering. What is inexpensive to cover the roof on a country house? What is better to put on the roof of the house

There are many materials for roofing. Each has its pros and cons. Not all types can be used everywhere. So how to cover the roof of the house? Which best material for the roof? When choosing, the following features are priority:

– reliability;

- life time;

– moisture resistance and fire resistance;

– mechanical strength, resistance to snow loads and wind;

- aesthetics, compliance with the style of construction;

- complexity / ease of installation (including hand-made);

Video "The better to cover the roof of the house":

Additional criteria are sound insulation and thermal insulation.

The design of the roof is also very important. If rolled materials and soft tiles are preferred for flat roofs, then sheet materials are preferred for pitched roofs with a large angle.

Important: when choosing, you need to focus on the weight of the material. For example, ceramic tiles are ten times heavier than metal tiles. So and rafter system under it should be much more powerful.

Of what better roof- you decide. Below are what are the roofs with a photo, their features, advantages and disadvantages.

metal tile

It is used for pitched (including hip, tent, broken) roofs, attics.

High mechanical strength, durability, resistance to moisture and wear, ultraviolet (does not fade), relatively big weight(low load on the rafters and bearing structures at home). Easy to handle and install. A beautiful view (the roof of the house made of metal tiles looks like a natural one from a distance). Low price.

With a variety of colors, the most popular metal tile is 8017 (according to RAL) photo below.

Flaws:

- the noise of rain and hail (like any metal, such a coating conducts sound very well);

- the need for thermal insulation (since metals also conduct heat well);

- with seasonal temperature changes, condensation forms on the wrong side. In addition to the crate, a counter-crate is also needed in without fail vapor barrier;

- installation requires compliance with safety rules. Otherwise, you can get injured or spoil the material;

Natural tiles (ceramics)

Material with a long history of existence. It has always been practical and reliable, now its properties have improved even more thanks to new processing technologies. Tiled roofing can be used everywhere, but in fact it is used mainly for expensive cottages.

Flaws: heavy weight, not everyone can afford a house with a tiled roof - high price. Installation is more energy-intensive and time-consuming than laying sheet and roll materials. The rest - dignity:

- long service life (the material is almost eternal);

- strength;

- resistance to any influences - thermal, precipitation, chemical, ultraviolet;

– aesthetics and style;

- a roof made of ceramic tiles absorbs sound, it is a good heat insulator, does not conduct electricity, does not accumulate static;

- fire resistance.

Ondulin

Inexpensive dressy material, can be used on flat roofs. Ondulin roofing material is made of pressed cardboard impregnated with bituminous compounds. There are many colors and shades. Other pros:

- sound insulation, heat-shielding properties;

– durability (up to fifty years);

– simple installation, low weight;

- moisture resistance, resistance to UV rays;

- waterproofing, Fire safety;

- flexibility, plasticity;

– not subject to corrosion and chemical influences.

Video "Ondulin Smart":

Flaws:

- not suitable for pitched roofs with a big slope

- like any bituminous coating, it becomes prone to cracking over time.

Slate

Asbestos-cement slate - cheap material, easy to install, durable and strong. Not the most pretentious look, because of this it is used more often for garages and outbuildings. pros:

- fire resistance;

- wavy slate serves up to forty years;

- resistance to mechanical stress;

- endure severe snow loads;

– resistance to moisture, corrosion.

Painted slate

Minuses:

- over time, it begins to crumble around the edges;

- in shaded areas, moss and lichens may appear.

Decking

According to the terms of use and installation technology, it is similar to a metal tile, but the sheets are much wider and the profile can be anything: rounded (wavy), trapezoidal, U-shaped. pros:

- light weight;

– ease of installation;

- strength;

– environmental cleanliness;

– an elegant look (there is a roofing painted corrugated board and galvanized);

– low price;

- a wide range of colors.

Minuses:

– it is necessary to ensure that there is no damage to the coating, because. the material is susceptible to corrosion;

- high windage (this must be taken into account during installation, with a strong wind the sheets can be torn off);

– thermal insulation and vapor barrier is required;

- Noise during rain and hail.

Flexible roof tiles

Bituminous tiles (as in the photo) - fiberglass coating impregnated with bitumen. On the outside - a thin layer of mineral granulate different colors. Used to create original roofs.

pros:

– thermal insulation;

- roof made of shingles well extinguishes the sound;

– tightness, hydraulic structure;

– beautiful appearance;

- it is easy to lay, there is even a tile - self-adhesive;

- a variety of colors, shades and shapes of tiles;

- you can decorate round, cone-shaped, bulbous roofs.

Basic flaw- price.

Ruberoid

Roofing felt is a cheap, durable material. Unfortunately, not too durable (average term - 15 years). Pros - water resistance, temperature resistance, ease of installation. Available local repair as separate payments.

Minuses:

- you need a solid base or crate;

- strict adherence to technology, otherwise, due to air cavities, the coating will bubble very quickly.

Rebate coating

Advantages of seam roofing - ease of installation, can be used for almost any roof, low weight. The disadvantage is the price.

The better to cover the roof is up to you. Throw away the options that do not fit the requirements, take into account your wishes and make a choice yourself.

Home is our castle. The comfort and microclimate in all rooms depend on how correctly its roof is covered. In view of this, it is very important to take a serious and responsible approach to the choice of building material. It is an important basis that determines the life of the roof and its quality characteristics.

The range of coverings for performance of roofing works the widest. What is the best way to cover the roof of a house? What technical features of the material to pay attention to? How to do all the necessary work correctly? More about this in the article.

cover the roof frame house it is possible with tiles, ondulin, profiled iron or ordinary slate. The listed roofing materials are practical to use, durable, easy and quick to install, have long term operation.

Tiles are a coating with a special structure that ensures perfect tightness of the roof. It does not require painting, is resistant to mechanical, chemical and atmospheric influences, is characterized by excellent corrosion resistance, reliability and manufacturability.

The main advantages of tiles:

• Excellent decorative properties. The material has a presentable appearance, does not require additional processing, allows you to visually highlight the house and give it a special flavor.
• Thermal resistance. The coating does not change its properties under the influence of ultraviolet radiation, does not fade, does not emit toxic substances hazardous to human health and the environment.
• Long service life. On average, correctly laid roofing flawlessly performs its functions for 25 - 30 years.
• No need for regular repair work. Tiling is not required special care, steadily transfers mechanical loadings, is not deformed and does not change the form.
• Ease of installation. You can cover the roof of a frame house if you wish.
• High quality. Innovative technologies, which form the basis for the production of tiles, guarantee its aesthetics and perfect matching of the profile.
• Wide range of colors. Finding the material of the desired color and type is not difficult.
• Small windage. Even a strong gust of wind will not be able to tear or wrap up individual elements of the roof.
• Possibility of dismantling. If necessary, the tile can be easily disassembled and reassembled, while the coating will not lose its main quality indicators.
• Light weight. The material does not create additional load on the roof.

Disadvantages of tiles:

• Up to 40% waste in case of non-compliance with the accepted installation rules.
• Formation of condensation on the inner surface as a result of a sudden change in ambient temperature.
• If installed incorrectly, it will not last long.

There are several types of material under consideration. To cover the roof of a frame house, bituminous, polymer-sand, metal, cement-sand and ceramic tiles are perfect.

When choosing a residual coating option, it is recommended to take into account the slope of the roof.

Watch the video about the installation of metal tiles:

Ondulin is another popular roofing material often used by builders. It is a wavy textile sheet coated with several layers of bituminous mixture.

Benefits of ondulin:

• Rigidity and light weight. The material does not create an additional load on the structure and allows you to make crates with a large step.
• Excellent sound and heat insulation. Ondulin does not let in extraneous sounds and allows you to reduce heating costs by up to 30%.
• Resistant to corrosion, rot and rust. The covering perfectly maintains chemical and atmospheric influences, keeping the qualitative characteristics.
• Environmental friendliness. In the production of ondulin, materials and compositions are used that do not contain concentrations of toxic substances hazardous to human health.

Coating disadvantages:

• Low fire safety. Ondulin is combustible, so the risk of fire increases.
• Minor color range.
• Unstable decorative properties. Roofing material quickly fades under the influence sun rays.
• Numerous joints.

It is cheaper to cover the roof with ondulin than with tiles, but it should be noted that the material is not resistant to mechanical stress. Even a minor mistake made during installation work can lead to roof leaks.

Profile iron is a roofing material obtained as a result of deformation of sheet metal in a cold state on special profiling equipment.

Its advantages:

• high performance. The professional flooring is steady against mechanical, chemical and atmospheric influences. It does not change its properties under the influence of ultraviolet radiation, does not fade in the sun due to a special polymer coating.
• Speed ​​and ease of installation. The material is easily matched to the size of the roof slope, eliminating the need for vertical overlaps.
• Excellent waterproofing properties. If the roofing work is done correctly, the roof of the house will not leak.
• Light weight. This feature of the profile iron allows you to significantly save on the crate.
• Affordable cost. In conditions of a limited budget, roofing is best done using this particular material.

Disadvantages of profile iron:

• Low rates of heat and sound insulation.
• Not the most presentable.
• Rectilinear forms, little associated with residential buildings.

Profile iron will not be able to adequately give respectability to the structure, make it warm, cozy and as comfortable as possible for living, despite the fact that its service life reaches 15-20 years, and the installation is carried out without any special technical frills.

Slate is another option for roofing material that can be used to cover the roof. frame structure. It is made from asbestos cement, characterized by practicality, durability and ease of installation.

The main advantages of slate include its following features:

• Incombustibility and low thermal conductivity.
• Resistant to corrosion under the influence of water and condensate.
• Excellent sound insulation and high frost resistance.
• Durability and strength.

Disadvantages of roofing material:

• The content of asbestos, dangerous to human health and the environment.
• Big weight. Average weight one sheet reaches 20 - 26 kg.
• Fragility and instability to mechanical stress.
• The tendency to form moss on the surface, which worsens the quality and functional characteristics.

A roof covered with slate is easy to repair: if necessary, one or more sheets of building material can be replaced without resorting to complex dismantling work.

But slate is not endowed with special aesthetic properties, so if the decorative component is important to you, it is better not to consider coating as a possible alternative.

Tiling technology

In order to properly cover the roof of a house with tiles, it is necessary to adhere to a technology that includes the following steps:

1. The first stage: laying waterproofing. This process is carried out as standard: the selected waterproofing material is mounted on a previously prepared surface.
2. The second stage: the device of the crate. The crate is considered the basis for the installation of tiles. It is mounted on top of the waterproofing. Lathing bars - perforated profile or a tree treated with an antiseptic composition - are fixed to the roof frame.

The third stage: installation of tiles. Building material is laid from the highest point of the roof downwards. Each slope must be covered separately.

First of all, the top row of sheets is laid. They are fixed using galvanized screws. Mandatory requirement: the tiles are overlapped. Next row sheets are mounted in the same way.

3. Fourth stage: installation of skates. Building elements are fastened with self-tapping screws.

Undoubtedly, tiles can be laid on their own, but it is advisable to entrust the work to professionals, since any mistake made during installation can cause the roof to leak.

Step-by-step plan for working with specialized iron

All roofing work with profile iron is carried out in several stages:

First step: device roofing cake- installation of steam and waterproofing. Steam and waterproofing materials are laid in one direction, the efficiency of their use largely depends on this.

The joints of the panels are connected with a special adhesive tape and securely fixed to the base of the roof of the house. The ventilated gap between the waterproofing and the profile iron should be 20 mm.

1. Second stage: installation of the crate. The step of its installation depends on the height of the profile. For a sheet with a height of 35mm, it is 1.5 meters. Profile iron less than 20 mm is recommended to be laid on a continuous crate.
2. The third stage: laying profile iron. The material is fastened down by each wave with self-tapping screws in such a way that the capillary groove overlaps. next sheet. The transverse overlap is determined depending on the slope angle of the slope and is 150 - 200 mm.
3. The fourth stage: the design of skates, adjoining walls and cornices with special elements that are fastened with self-tapping screws.

Roofing work using profile iron is not recommended in rainy and windy weather for safety reasons.

Overview of the cost of materials for roofing work

Tiles are one of the most popular roofing materials. Its price largely depends on the quality characteristics and on average varies from 300 to 500 rubles. per sq. m.

Among the numerous coating brands, the leading positions in the market are occupied by Roben, Finnera, Monterrey, Decorrey, Dune, Prestige, IKO, Ruflex. The products of these brands are of excellent quality and meet European standards. Services for laying tiles will cost from 250 to 700 rubles. per sq. m.

The cost of ondulin ranges from 300 to 650 rubles. per sheet. Among the popular grades of the material, the ONDULINE brand should be noted separately. The entire range of products of this brand has excellent quality characteristics and in all respects complies with applicable standards.

Professionals are ready to perform ondulin installation in the following price range: from 150 to 500 rubles. per sq. m.

A sheet of roofing profile iron is sold at a price of 330 - 370 rubles. The final price of the material depends largely on technical features, brands and parameters.

Popular manufacturers of high-quality profile iron: Gerard, Profit, Lion Steel. average cost roofing work on laying corrugated board: simple roofing - 460 rubles. per sq. m, the average roof - 550 rubles. per sq.m., complex roof - 610 rubles. per sq. m.

The cost of an asbestos slate sheet is 210 - 290 rubles. Professional craftsmen are ready to perform roofing work in the price range from 45 to 230 rubles. per sq. m.

Summing up, we can conclude that the cheapest way to finish the roof is with slate. Laying tiles will cost several times more, but if the budget allows, it is better to best option choose this particular roofing, it perfectly copes with its main functions and allows you to create optimally indoors comfortable conditions for living.

Watch a video selection on the choice of roofing materials:

Was this article helpful?

During construction country house it is important to pay special attention to the roof. It performs the most important functions that turn off protection against noise and precipitation. It is important that the roof is installed correctly, and the installation is carried out from reliable high-quality materials. Then the design will be strong and durable. The roof should not be blown and leak. In addition, it should look aesthetically pleasing and harmonious with the structure. Let's find out what is better to cover the roof wooden house, and consider each type separately.

Slate and ruberoid

These are the most affordable and economical options and are suitable if you want to cover your roof cheaply and quickly. Slate is a durable material that lasts 30-40 years. It is resistant to the negative effects of moisture and precipitation, mechanical damage, withstands snow loads. However, over time, the edges of the roof begin to crumble, fungus may appear on the surface, and the roof itself loses its original attractive appearance.

However, slate is not recommended to be used to cover the roof of a wooden house, as it is heavy and places a heavy load on the structure and foundation. In addition, asbestos in the structure is harmful to human health, which violates the environmental friendliness and naturalness of a wooden house.

Roofing material is an even more unreliable option, as it wears out in a short time. It is not resistant to the negative effects of wind, mechanical stress, temperature changes. The most reliable and durable euroroofing material with bituminous impregnation will last up to 25 years, and the cheapest and simplest - no more than five years. To increase the service life of products, increase sound and heat insulation, sheets are laid in three to four layers. Among the advantages, we note easy and quick installation, low weight and low cost.

Ruberoid should be used with caution for wooden buildings, as it is highly flammable. But slate and roofing material are great as waterproofing materials, which insulate the attic and roof, the foundation of the house. it available materials that are easy to install. They effectively protect against moisture, groundwater and precipitation.

Decking

An economical and affordable type of roofing, which is used for both construction and renovation. Profiled flooring can not only cover a new one, but also overlap old roof in a private house, bathhouse or outbuildings. Such a roof is distinguished by versatility, strength and reliability, a wide range of colors and a long service layer. Environmental friendliness and light weight allow the use of corrugated board for small structures and wooden houses.

Decking is made of galvanized steel in the form of wide sheets with outlines in the form of waves or a trapezoid. A protective and decorative layer is applied on top of the material. Easy installation allows you to install a roof from corrugated board with your own hands in short time and at any temperature.

Among the minuses, we note that during installation or transportation, you can easily damage protective layer material. This will cause deformation and corrosion of the steel. In addition, corrugated board makes a lot of noise during rain. In the manufacture complex roofs, including attics, a large amount of material will be required. Decking needs additional thermal insulation and waterproofing, and holes and cut points need to be painted.

metal tile

This is the most popular and demanded material today, which is characterized by high wear resistance and strength, long service life up to 100 years! The metal tile is made of profiled galvanized steel, which is coated with polymer paint. It easily tolerates exposure to moisture and various external factors, resists mechanical damage.

Such a roof reliably protects from exposure to sunlight, retains its color and original presentable appearance for a long time. It is an aesthetically pleasing and environmentally friendly material. However, metal tiles are difficult to cut. In addition, such a roof must be insulated and an additional layer of sound insulation made. This complicates installation and increases financial expenses, and after installation, a lot of waste remains.

The metal tile has a small weight, so it does not give a strong load or pressure on the structure and foundation. Due to this, the material can be used to create roofs with unusual configurations and shapes, to cover a house with an attic. Also, metal tiles are suitable for covering light buildings and wooden houses, as they are environmentally friendly and lightweight.

Ceramic and flexible tiles

Ceramic tile is a reliable and durable coating that will last over 100 years. The material is resistant to moisture, wind, precipitation and other external factors. It does not pass ultraviolet, and modern manufacturing and installation technologies increase the physical properties and improve the appearance of the material. However, this material is expensive and heavy, so it is better not to use ceramic roofing for wooden houses and light buildings.

Flexible or soft tiles are made of fiberglass, which is impregnated with bitumen. On the surface of the roof there are stone granules that perform a decorative and protective function. Seamless material is distinguished by a wide selection of shapes and colors, resistance to moisture and temperature extremes.

Due to the softness of the flexible roof does not need additional waterproofing. It is suitable for the realization of original design solutions, characterized by light weight and easy installation, elasticity and high thermal insulation. But keep in mind that such tiles are more expensive than other types. In addition, it serves a relatively short time, about 20-30 years.

Ondulin

Ondulin - wavy light and durable sheets that are produced from organic fibers and pressed cardboard impregnated with bitumen. An economical option imitates slate, while it is an environmentally friendly and non-combustible material that is safe for humans and suitable for covering wooden buildings. In addition, ondulin is light in weight and does not give a strong load.

Ondulin sheets are characterized by high resistance to moisture and biological factors. On the surface of the roof fungus or mold does not form, bacteria will not appear. In addition, ondulin is not emitted during operation. harmful substances. Condensation does not accumulate under the sheets.

The material is easy to cut and lay, so the installation of the roof can be done by hand in a short time. Ondulin does not crumble and does not break, does not leave a lot of waste after installation. The flexibility of the material allows the design of curved roofs, structures with vaults and domes.

In addition, you can easily select desired color and color of the product. Ondulin roofing does not require additional sound and waterproofing. It differs in reliability, durability and moisture resistance, does not give in to corrosion and is fireproof. Ondulin roof will last 50 years.

natural roof

Natural materials are the most optimal for a wooden house. First of all, these include a wooden roof or shingle. It is important to choose the right type of wood and use translucent protective oils for processing. Then wooden roof will last over 30 years. This design is distinguished by aesthetic appearance, sophistication and harmony, 100% environmental friendliness and safety, easy installation and low weight.

Wooden roofing is best done from larch or cedar. Wood “breathes”, and when interacting with moisture (precipitation) it swells and closes, which guarantees reliable sealing. When dry, the shingle bends slightly, which ensures prompt drying and ventilation. However, such a roof is highly flammable, so additional surface treatment with protective agents is required.

Reed roofing is another type of natural coating, which is characterized by environmental cleanliness and safety. This is a relatively new material, which is used as a specially grown water reed. It is highly resistant to moisture and durable. The reed structure does not swell and retains its original shape. However, it is still not widespread enough and is expensive.

The best coating for a wooden house

If you do not know how to roof a wooden house, natural wooden roofs, ondulin and classic metal tiles will be suitable options. You can use flexible tiles and corrugated board, for outbuildings - slate. It is important not only to choose a reliable coating, but also to properly install the roof and truss system.

Without proper experience and knowledge in roofing installation, the coating will shrink, leak, warp, and lead to other problems. To get a quality result, contact the professionals. Masters of the MariSrub company will reliably and promptly perform roofing work. Let's pick suitable coating, accessories and accessories. Let's execute installation, warming and a waterproofing, having hemmed roofs.

We install mansard roofing and complex structures skylights! We offer a full range of services, which, in addition to installing the roof, includes the creation of a project and the manufacture of lumber for the project, installation of the foundation and log cabin, finishing, installation and connection engineering networks. We guarantee the quality of work and strict observance of deadlines!

In the process of building or repairing a house, the question usually arises, what is the best way to cover the roof?

In building a house important point is the roof and the material from which the roof will be installed.

Quite often, fashion influences the choice, but one should not forget that the main thing is that the material used must be of high quality.

The main parameters affecting the choice of material

The main criteria by which the choice of coverage for the house is made are decorative qualities, reliability and cost. But the first thing that requires special attention is weight. When choosing a coating, it is necessary to take into account the load on the supporting structures, that is, if the material is too heavy for them, then it is better to choose something lighter.

Practicality and durability are equally important qualities of a future roof for a house. Usually the service life of the material is indicated without taking into account the harsh operating conditions, so you need to build a roof appropriate climatic conditions region.

The cost of the roof is affected by its thickness, which is able to provide good protection and attractive appearance.

The basic principles that almost everyone relies on when choosing a material for the roof of a house are decorative qualities, reliability and cost.

The roofing material must be:

• resistant to UV rays;
• airtight;
• durable;
• resistant to temperature changes and external influences;
• durable.

AT modern world there are about twenty types various materials, which can be at home. However, exotic species are unlikely to be in high demand, so it is better to opt for popular and common roofing materials that are on the domestic construction market.

slate sheets

The slate is presented in the form large sheets wavy shape, which are made of asbestos-cement mortar. This material is durable, but it has the disadvantage of increased fragility. The standard sheet size in length is 1750 mm, the width varies from 980 to 1130 mm. The height of the slate waves is up to 54 mm.

Temperature fluctuations do not have a destructive effect on the material, so if you cover the roof of your house with it, repairs and replacement of the roof will not be needed a long period time. This is the most common option for covering most homes, as the material has a low cost and a neat look.

The scheme of laying slate on the roof: with alignment, with offset longitudinal edges.

Installation of slate is quite simple, but it is necessary to work with it carefully so as not to damage the sheets, so there must be an assistant during the work. Or you can trust the installation professional craftsmen who will do everything qualitatively and without damage. Modern slate coating is easy to paint in any shade, which will greatly improve general form roof and make it more durable. When choosing a slate, consider the following:

• sheets must be free of dents, cracks and various foreign inclusions;
• edge - have an even appearance without delamination.

Ondulin - modern euroslate

The material is made by pressing cardboard, and after that it is treated with bituminous impregnation. Ondulin is quite often chosen as a future roof for residential buildings. It is able to serve more than 30 years, has a relatively low price and easy to mount. This type of roof is an ideal solution for building a beautiful and budget roof, which can be both single-sided and double-sided. Ease of installation is ensured by the lightness of the material, if, for example, we compare it with slate.

The main disadvantage of the material is its low strength and poor sound insulation. Therefore, during heavy rainfall, all the noise is clearly audible inside the house.

The construction material often forged, so its quality must be given special attention when choosing. Natural ondulin has the following features:

• on the inside has a corrugated mesh;
• a sheet of material consists of 10 waves;
• the outer side is rough to the touch;
• the color is always matte and saturated;
• must be on the last wave of the sheet the code of the manufacturer's plant.

metal sheets

This type of coating is usually made of aluminum or galvanized steel. Many choose this material to cover the roof of the house because of its practicality and durability. It is not fragile, unlike slate, and at the same time it has a low cost. One of the disadvantages is difficult process installation, the sheets are interconnected using special bends or folds.

The advantages of this roofing material include:

• light weight;
• the coating can be used on sloping roofs and with a slight slope;
• long service life.

• poor sound insulation;
• poor protection from heat or cold.

Looks good as a roof and corrugated board, made of steel sheet, on which a wavy or trapezoidal profile is formed. The sheet is treated with a polymer coating on both sides. Such a roof has high rigidity and low weight.

Beautiful metal tile

This type of roof is created on the basis of galvanized steel and imitates tiles with its appearance. The material is treated with an anti-corrosion compound, so it can last for many years. means to do right choice. The coating has a number of advantages:

• ease of installation;
• differs in reliability;
• decorates the house perfectly.

This material is made of metal, respectively, it has the same disadvantages as metal sheets.

The metal tile is different:

• by color (there are enough to choose from);
• waveform;
• type of coating (matte and glossy);
• thickness (from 0.4 to 0.5 mm);
• produced by various manufacturers.

Flexible or soft tiles

Such a tile is presented in the form of a multilayer material made on the basis of bitumen and metal-layer. To give bitumen such properties as strength and resistance to deformation, special polymer compositions are added to it. Outside, the material is protected by a fine basalt coating. different shade. Soft tiles produced in sheets standard size, usually 1m x 0.33mm.

You can do it yourself, but at the same time there will be no exact guarantee of the long service life of the structure, because in the process of gluing the tiles it is necessary to create a certain ventilation, and only specialists can do this. This roof is suitable for roofs of any configuration with a slope of 12 to 90 degrees.

All advantages of a covering from a metal tile are inherent in material. And also it has:

• high sound and heat insulation;
• sealing (the rays of the sun contribute to the fusion of sheets without the appearance of a noticeable seam).

If you cover the roof of the house shingles- it will give the building a non-standard and original look.

Natural ceramic tiles

The material has been used to cover the roofs of houses for more than a hundred years and is made from fired clay. At the beginning, clay blanks are shaped, dried, and then fired in a special oven at a temperature of approximately 1000 ° C. Natural tiles have many advantages:

• durability (from 50 to 100 years);
• high resistance to humidity, ultraviolet radiation, frost or heat;
• ease of installation even on complex surfaces due to the division into individual elements;
• environmental friendliness;
• good sound insulation;
• ceramic tiles are prestigious and beautiful view roofs.

At the same time, the material is not without certain drawbacks, which should also be paid attention to:

• high cost, especially for glazed tiles;
• since the installation is done manually - this further increases the cost of the work if the installation is done by hired craftsmen;
• tile elements are quite heavy, so the supporting structures must be reliable;
• has a certain brittleness, which manifests itself under increased mechanical loads.

Soft roll roof

The material is a multi-layer coating that protects the roof from negative impact various external factors, sudden temperature changes and precipitation. Although roll roofing and is not an elite coating, but at the same time it is quite popular and is often used during the construction of houses.

To decide whether to use this material, you need to consider all its advantages and disadvantages. The advantages include:

• strength and practicality;
• excellent hydro and soundproof functions;
• fairly light weight;
• simple installation;
• high fire safety;
• resistance to temperature changes and UV rays;
• excellent degree of thermal protection;
• The material is made from environmentally friendly components.

The main disadvantage of such a roof is the inability to provide good tightness, which can cause accumulation a large number water vapor in the middle of the insulation. Accordingly, at low temperatures, frozen water is able to tear off the waterproofing layer from the base.

Often, the townsfolk encounter difficulties in the construction of their homes.

One of these difficulties is the question of what is better to cover the roof of a private house.

Thanks to this article, this problem will no longer occur.

Everyone will choose what he likes and can afford.

Roof decoration materials

Currently, the roofing materials market impresses with its diverse wide range.

All of them are distinguished by high manufacturability and quality, but are suitable for certain architectural and design solutions.

Slate and euroslate

Slate today is a material that is made by mixing asbestos mass and cement.

The reasons for its huge popularity are its unpretentiousness, excellent qualities of resistance to fire, strength.

A roof covered with such material does not need additional maintenance, this material is much cheaper compared to others.

Usually, sheets 1130 by 1750 mm are used to decorate the roof of houses.

Sheets are usually made with eight waves.

Laying a roof with such slate does not require any special knowledge; you can do it yourself if you have a good eye.

Euroslate in appearance is practically no different from the good old corrugated slate made of cement and asbestos.

But, unlike the "classic" material, ondulin - the second name of euroslate - is made from a different material: pressed bitumen, which is much more plastic and stronger.

Laying this material requires additional structures in the form of a valley, a ridge, sheer planks, and so on.

metal roof

A metal tile is a roofing material that is made of thin plates of copper or stainless steel.

To improve the protective properties, each plate is profiled and coated with a polymer layer.

In its appearance, the metal tile resembles a tile of ceramic production.

This material is very common, since its use is advisable for any climatic zones.

Metal tiles, as a rule, cover roofs with a different number of slopes.

The only drawback of this material is its poor corrosion resistance.

If the polymer layer is destroyed under the influence of the environment, then the metal of the tile undergoes corrosion from the influence of snow or rain, temperatures.

For protection, it is necessary to additionally treat the joints of the metal tile with varnish or a thin layer of mastic when laying.

Seam paintings

Seam roofing is one of the most reliable types of coating, which provides complete tightness at the joints.

Seam plates, which are called paintings, are made of thin-sheet galvanized steel.

Each slab can be coated with a polymer layer, but there are slabs without them.

The plates are interconnected by fold locks, the design of which is a groove on one plate and a sliding groove on the other.

From above, both grooves are hidden by a seam lock. .

Advantages:

• tightness, which is achieved by joining with a seam and plates that are overlapped;
• very long service life tremendous resistance to corrosion is increased by the use of polymers and copper plates;
• very convenient installation: seam roofing is perfect for any type of roof, it is very easy to install, the slabs are easily adjusted to each other.

Roll roofing

Roll roofing is the most common and simple type.

This is due to the ease of installation and its absolute cheapness.

As a rule, roll coating is used on a flat roof.

Such a roof can easily be laid on the reinforced concrete covering of outbuildings.

The canvas is usually made no wider than a meter and seven to nine meters in length.

The thickness of the canvas varies from 2 to 5 millimeters depending on the length: the longer, the thicker.

Roll coating is not used for roofs with a slope of more than 30 degrees, and in other cases this species roofing can easily give odds to difficult-to-install and expensive types of roofing materials.

mastic roofing

This type of roof belongs to the type of soft, similar to rolled, but in this case roll materials are not used.

Special mastics and additional reinforcement are used as "raw materials".

The positive properties of mastic roofing are its low cost and light weight. technological process styling.

The main thing in the laying technique is to lay the entire mastic in an even layer, reinforce with a thin wooden or metal crate and again pour an even layer of hot mastic.

The roof, which is filled with mastic, is a combination of quality, functionality and low cost.

There are two types of mastic roofing: without reinforcement and with additional reinforcement.

Non-reinforced roofs using mastic are made in two layers: a silicone emulsion layer that does not let water through, and a mastic layer is poured onto the emulsion layer.

Everything is done "hot".

Mastic roofing has one positive property: when pouring, there are no seams, but at the same time it is necessary to observe the uniformity of pouring, except for seals under the ridge or in the places where joints or corners of the roof are fastened.

Type-setting roof

Type-setting roofs, as a rule, are made using ceramic tiles.

Such a roof for a long time of use different generations passed many tests.

The type-setting roof is very steady against influence of rainfall and temperature.

Its texture has sufficient flexibility, which greatly facilitates installation.

Recently, stacked roofing has been very popular in the construction of country cottages and houses.

Tiles are of three types:

• from clay of different properties;
• mixture of sand and polymer dust,
• mixture of sand and Portland cement.

Such a roof is very suitable for roofs with a different number of slopes, but it must be remembered that at an angle of inclination above 50 degrees, the tiles are additionally fastened with screws.

The type-setting roof is the most expensive type of roofing, therefore it is used as a "finishing" type of roofing for important buildings.

The main advantages include a beautiful aesthetic appearance, fire resistance and strength.

Due to the fact that the tiles are heavy, the roof requires additional system rafters and lathing.

Video about how to cover the roof.

Feedback from buyers and developers

StroyTrest LLC, on the market since 1992. We actively use seam roofing in the construction of roofs. This material has proven itself in terms of quality, consumer demand, excellent strength characteristics. The invention of the seam is a new word in the manufacture of roofing. At present, our company has ceased to deal with other types of roofing, since it is folded slabs that account for 90% of our income. In addition to installation, we recommend this material to both private residents and developers.

Egor, 42 years old. I recently decided to rebuild a house in the country. He poured and laid the floors, raised the walls, erected a hipped roof, but the limit of funds for this turned out to be exhausted. The question arose of how to make a roof, but at a cheaper price. In order to meet the budget, I decided to make a roof from rolled material. It came out great. It is very easy to lay, cut with an ordinary knife, the cost also satisfied me. Excellent quality material at a reasonable price.

Semyon, 27 years old. Moved with his wife to a two-story building. Such houses are still found in the urban settlement, they lived for a whole summer, and in the fall it turned out that the roof was leaking. I had no doubts for a long time, I decided to re-roof at my own expense. The roof is flat. I thought for a long time what to do and in the end I decided to fill the floors with mastic. For an area of ​​40 square meters only 80 liters of mastic were enough, which cost several thousand rubles. We are still living, 4 years have passed, and we do not complain. An excellent material for roofing.

Sergey Novozhilov - expert in roofing materials with 9 years of experience practical work in the field of engineering solutions in construction.