Filling a wardrobe coupe into a hall of 1.5 meters. Internal filling of a wardrobe in the hallway

Optimal layout And the rational use of space is the key to comfort. The arrangement of furniture in the room is a key factor.

Thanks to the individual execution, the wardrobe can be organically "entered" in places previously considered oversized.

But just buy a wardrobe - not enough. It is necessary that he serve not just "furniture", but became a functional subject and helped streamline the necessary things. To do this, you need to know how to plan a wardrobe inside.

It can easily arrange things different lengthsAnd numerous shelves will help freely place other trifles.

To begin with, decide on the location of the cabinet. It is this fact that will decide how it will look like in the end: its depth, height, width, filling.

Be careful with the choice of the door extension mechanism - it should not be too noisy.

For a more specific presentation of the location of the furniture, you can limit underworld things that is intended for installation. So you can evaluate the space in the room and adjust the dimensions of future furniture.

The closet of the coupe will fit into most modern styles.

If you review all the components of the wardrobe, then you can designate the main components:

1. Base (lower base);
2. System (base or "support", it includes sliding devices - wheels, rails);
3. Furniture panels (walls, ceiling, floor);
4. Doors (may have different species, principle of operation - sliding);
5. False panel (located in the part where it is better to hide emptiness);
6. Frame or rod (there is a parallel door, or perpendicularly, trempel hang on them).

Regarding internal content, here the components of everyone are known - retractable boxes, shelves, compartments. They can be combined and achieved the desired results.

For example, if the bedroom wardrobe is selected, that is, some classic components that are present in almost every version:

- Shelves. Their number may vary depending on the needs, can be located in any part of it;

It also concerns the distance between them.

- Retractable boxes. Usually disposed of at the bottom, depending on the destination have different depths and quantity;

Retractable drawers are usually used as a chest.

- Rods. For large size, it can be installed from one or more rods that are used to hang clothes.

The rod can be for short clothing (blouses, jackets, skirts) and for a long (coat, raincoats, dresses).

If the cabinet is planned for the hallway and wardrobe roomTheir composition will not be radically different. The only thing that can be varied is the number of components of the elements depending on the appointment of the wardrobe. No river retractable boxesMost likely compensated by the presence of a plurality of shelves and storage compartments.

A variety of "filling" can be chosen based on personal needs.

Choosing the location of the elements, it is also worth thinking who from family members will use them. For example, if the child is given a personal space for clothes and things, it is necessary to arrange it in an accessible place available to its growth. The compartment for this can be planted as follows: downstairs advanced box, shelf and rod for tremenders. When planning space for adult things, think whether the storage of other items will be except for clothing (blankets, sheets, pillows, shoe boxes, and so on).

This will be the obvious necessary layout of the wardrobe.

What sizes to choose

To decide on the dimensions and choose the optimal filling of the cabinet, it is better to immediately take into account the factors that will become decisive when choosing.

1. Depth

If we talk about sizes, it is purely all individually. But there are standards that are often used. It concerns depth. As a rule, it is 60 cm.

If you take into account here and the door system, it increases another 5 cm.

But what to do if this option does not fit? There are furniture under the order to satisfy all customer needs in depth, width, height of the product, and even in the picture on the doors. Optionally, you can order a construction with depth of 40 cm and it will optimally "fit down" in the interior.

For example, it is suitable for a corridor, in which hang up the top clothes and store shoes.

1. Height

Planning a wardrobe inside with dimensions should be maximally adjusted for all households. It is necessary to take into account, first of all, the growth and opportunity to use a staircase or a chair in order to get to the highest point.

Upstairs are rarely used and seasonal things, bags and suitcases, boxes with shoes.

Usually even hard-to-reach places are busy things that are rarely used in everyday life. For practicality, many acquire a wardrobe in the ceiling.

In this case, it will not be necessary to constantly shake out from there.

1. Width

According to this criterion, no rules can be, because the width is chosen purely from the characteristics of the room, the number of accommodated things where it will be and wishes homeowners.

The wider there will be furniture large quantity Sections can be there.

Put the cabinet to the angle, if it dictates the space of the room, will not be difficult. It is necessary to know only the width of one and the second part. If the form will like the letter "P", then, knowing the width of all parts, you can create a qualitatively melted design.

This will depend on this and the amount and width of the sliding doors.

Do not overestimate your capabilities in dimensions. If there is no need for a large size of the wardrobe and there are no plans to purchase a large number of things, then buying a more modest piece of furniture.

Little wardrobes are expedient to post in small hallways - standard products there simply do not fit, tanning the passage.

And vice versa - for a large volume of things, they initially think about the purchase of a large-sized version, so that everything is fitted and found its place.

In the spacious living room or bedroom it is possible to place big cupboard.

Wardrobe coupe: how to plan

For designs that will be in different parts Premises, it is necessary to select your individual inner component. Consider in more detail the basic configurations that are offered for different locations in room.

1. Bedroom

Although the presumptive presence of items has already been described above, but it will not clarify a lot.

Thanks to the correctly selected filling, such a wardrobe can accommodate almost all of your wardrobe.

The usual filling of the cabinet in the bedroom must meet the following requirements:

• Availability of place for folding bedding (shelves);
• Storage of underwear (drawers with divisions);
• Wipening of everyday clothes (rod with trempels, where it can be in two levels for clothes of different lengths);
• Storage of accessories (drawers with divisions or shelves);
• Household "Supply" (Ironing Board, Iron, Steamer, Haircut Machine and Much Fights Fights Between Divisions or Layered Special Place).

Not only your things, but also bed linen, additional sets of pillows and blankets, and even ironing board can easily fit into it.

1. Parishion

As the hallway in different houses and apartments have different forms, width and length, then select furniture needed according to these features. The system of the cabinet has sliding view Doors, it will suit almost any type of hallway.

It is already worth repelled from the depths of the cabinet.

In the hallway you need places for the following things:

• Outerwear (rod);
• Shoes (shelves, retractable systems with storage places);
• Accessories (shelves, retractable boxes);

It will be relevant to the placement of the mirror on one door or two.

The wardrobe in the hallway is indispensable for storing clothes for each of the seasons and numerous shoes.

1. Wardrobe

How to plan a wardrobe inside for a dressing room? There are already more space for fantasy, because you can have anything in the dressing room and in those quantities that allow dimensions.

The thoughtful organization of space and storage of things will undoubtedly play your hand.

Put in the "coupe" you can:

• All types of clothing, ranging from underwear and ending with fur coats or jackets (used designs with divisions and rods);
• All sorts of accessories from earring to travel bags and suitcases (extendable top shelves with a width of about 50 cm);
• Shoes (racks and holders);
• Hats (shelves);
• Household stuff (shelves, retractable systems).

The number of shelves, sections and dimensions of furniture depend on the volume indoor space.

Installation

All components are manufactured both by standard development and ordered. The first option can immediately get up in the right place, and may require individual approach. Then the wardrobe will make on the basis of the wishes of the client.

As a facade decor, it is better to choose a mirror surface, at least for one of the doors.

After some time using a wardrobe, the layout inside may not comply with the standards of comfort of a separate family. Then you can upgrade the already existing cabinet filling by adding or eliminating some elements. To install, it is enough to have the necessary accessories and a screwdriver. In the extreme case, you can call a specialist.

For installation, special accessories are used - under items that can be extended, doors, mounting rods, backlight, etc.

Filling a wardrobe in a small space combined all components of furniture walls, allowing you to save the area of \u200b\u200bthe room. Convenient sliding doors allow you to install such a wardrobe even in narrow corridor, but beautiful design The facade turns a simple piece of furniture in the artwork of art.

Proper filling

The options for filling the cabinet in the form of a compartment set. It all depends on the size of the furniture item itself, the buyer's preferences, the location in the apartment. Right choice Components and their location will allow rationally to use each centimeter of the internal space, while ensuring convenient access to all necessary zones.

Before planing the filling of the wardrobe, you need to clearly decide on the sizes of things that will be stored in it. Depending on this, it is determined: the height of the compartment for suspended on the shoulders of suits, coats and dresses, the width of the shelves for storing the incumbent things, shoes, bedding.

With standard cabinet sizes useful space It has a depth of 50 cm. Based on this figure, you can adjust the width of the shelves and boxes, the position of the crossbar for the hangers.

With two doors

The width of the two-door wardrobe can be different, everything solve the doors. To ensure reliable holding in the guide profile and the fortress of the door itself, the depth of the cabinet should be 60 cm. With a maximum width of the sash 90 cm, the furniture object can reach the length of 2 meters.

Standard models are equipped with antleesols, sections with crossbar and with a 45 cm width shelves. At the bottom of the bottom there may be open shelves for overall and heavy things or retractable boxes.

With three doors

The maximum three-door wardrobe width is 3 meters. The shortest model with a length of 1.2 m is equipped with 40 cm sash.

Filling can be repeated a package of a cabinet with two doors, but it is more expedient to divide the space on 3 main zones so that each is behind a separate sash.

Based on this, the space is zoned like this: one large separation from the crossbar, 2 rows of shelves or row of shelves in the middle and 2 large sections on the sides. You can use one branch with a bar for storing clothes to the whole growth, the other for the jackets, shirts. This makes it possible to apply part of space for other needs.

Mandatory is the presence of antleesole and the lower section.

Angular

If there is a free corner in the room, even with a small radius, it is best to put there an angular wardrobe. Despite compactness, such models are spacious and highly functional.

In their form, they can be:

1. Diagonal - with doors throughout the front plane, have a triangle shape.
2. Trapezoidal - one side wall adjacent to the wall and exceeds the length of another, free standing.
3. M-shaped - consist of two parts of the same or different length, each of which is installed near the wall adjacent to the corner.
4. Five-colored - symmetric structures with truncated corners.

The possibility of filling M-shaped models is similar to the simple wardrobe with a strong difference - this is the presence in the corner of one half of the hard-to-reach zone. Most often, there they equip the crossbar and store upper clothes in the offseason.

In other cases, the possibility of configuration is greatly expanded due to the additional free space Immediately behind the doors. If the location is allowed, such a piece of furniture can be a mini-dressing room, which can be logged in and free to get everything you need. In it put outdoor hangers, even equip the trumpem with a small ash.

Schemes corner cabinets Diagonal type necessarily provide triangular shelves on both sides of the door.

Radius

Experiments with functionality and compactness of angular cabinets led to the creation of radius models. main feature Such furniture objects are rounded facades that are divided into 3 types:

1. Convex. With a radius coming out.
2. Concave. The facade of such a cabinet goes inside, freeing the part of the room.
3. Combined. With a wave-like facade.

Radius wardrobes are made in classic style Or with elements of asymmetry, which allows you to smooth all the corners. The capacity of any type is sufficient, and appearance It strides ease, smoothness and allows us to use even in the most coupling living room.

Built-in

Empty wardrobes are very popular. Their design implies the presence of doors and filling elements that are attached directly to the walls, sex and ceiling. This greatly reduces the cost of the product. And if there is a niche indoors, then it makes it almost indispensable.

The ability to determine the depth of the cabinet itself allows you to install furniture in the corridor with a small width, in children's small sizes, etc.

The filling of the built-in wardrobe may differ only by the direction of the rod for suspended belongings (the depth is less than the width of the shoulders) and the working depth of the shelves and boxes.

Choose a stuffing in the bedroom

Filling a wardrobe in the bedroom requires special personality. It depends on the number of people who will use the furniture, the volume of clothing, accessories and many other factors.

The average cabinet department is the most commonly used. Here you should install the most necessary compartments in the form of drawers and baskets: for underwear, ties, socks, documents, etc. often they are equipped with cell compartments. The width of the drawers is determined by the door. Over one sash, elements can be placed in full length or paired, 2 times less, effectively combine them.

For men, the installation of special trouser hangers will be useful. For women - hidden behind the doors of the tremor with a mirror, drawers for decorations and a wide shelf for cosmetics and perfume.

If the volume allows, the TV and others are embedded in the wardrobe electronic systems, Iron holder, even workplace With a writing table.

Mandatory elements

The basic equipment of the wardrobes implies the presence of a large station with a barbell, open shelves all over and under the ceiling, retractable elements.

First of all, the purpose of the wrapping department is determined: it will be common to male and female things or better divide them. Use it to combine long and short things, in which case the height should be at least 160 cm, or equip a separate zone for shirts and blades with a height of 80 cm.

At the very top, they separate the place under the mezzanine with a height of 50 cm, where they are stored rarely used things with a slight weight. In the lower compartment leave open shelves for heavy items.

Mandatory component - a number of stationary shelves for storing the upper right clothing, underwear, bedding.

Filling options in the hallway

The use of wardrobes in the hallway has long proved its effectiveness. Even the furniture is even little size With competent configuration, it is capable of accommodating the upper clothes, related things and accessories of all family members of the four. And the mirror facade eliminates the need to allocate an additional place for reflective products.

To create an individual space, you can use the designer inner filling of the wardrobe in the hallway, photos of such solutions in large quantities Presented on the pages of catalogs and glossy magazines in the interior.

There are a number of rules for the separation of the cabinet in the hallway to the section:

1. The upper shelves are used for storing hats not within the season, boxes with shoes and other things that will not need in the near future.
2. Closer to the floor equip holders or shelves for shoes and items of care.
3. The middle department is discharged under the upper clothes. It is completed with a stationary or retractable barbell, depending on the depth of the cabinet it is attached parallel to the facade or at an angle of 90 °.

Besides mandatory elements, equip the holders for keys, umbrellas, hats, etc. If it allows the area of \u200b\u200bthe room, it is convenient to use an open segment on which hooks for clothes are placed, additional shelves from both above and below. This is especially appreciated by the owners of apartments that often receive guests.

Photo gallery with dimensions

In the presented gallery, you can consider all standard dimensions And choose the options like a wardrobe in the photo.

The wardrobe is a very popular variety of cabinets, because it is not only spacious, but also takes enough space. This piece of furniture is quite functional.

In this article we will tell you how to make a wardrobe with your own hands.

What is a coupe

The concept of the coupe first appeared in France in the century of horse crews. At that time, urban streets where the simple people lived, were so narrow that it was not always possible to open the door of the cart. This led to the appearance in the 17th century a carriage-compartment with sliding doors.

It is believed that the first wagon-compartment was invented by the French Master of Karet Master Zhanto. Is it really unknown.

The crew of the coupe was attached to flirty and frivolous concepts, because such a type of transport was usually used for secret meetings with ladies. Part of specialists in the field of linguistics believe that the coupe happened from the word "coupe", which translated from French means an extramarital connection.

After time, the door-coupe began to apply for trains of trains. As for the furniture industry, the wardrobe is called any wardrobe with sliding doors.

Types of cabinet

• Sliding wardrobes can be:
• Radius;
• Built-in;
• Cabinet;
• Straight;
• Corner.

Production technology of the built-in wardrobe do it yourself

Instructions how to make a wardrobe with your own hands:

• We choose the material;
• Determine the degree, nature and technology of how the cabinet filling will be placed;
• We design the doors, choose the suspension version;
• We choose technology for mounting shelves;
• We prepare a niche;
• We make the necessary measurements and drawings;
• Acquire the necessary materials and accessories;
• We drink the required billets;
• We collect a wardrobe and mount the internal luminaires if necessary.

What makes a wardrobe

Before starting to design a closet, you need to decide on the material, because it directly depends on it, what technology will be manufactured this subject Furniture.

From wood and lining

Wood is a classic material for the manufacture of furniture. Today it is very prestigious to have headsets from natural tree. But for the wardrobe - it is not the best choicebecause because of more high humidity The tree can begin to deform.

If you still want to make a wardrobe wooden, then choose a long-layer tree that does not have twisted, bitch and cracks. It must be processed by special compositions.

Lining can be made of plastic or MDF. It is not necessary to pre-prepare it. But the frame of the cabinet doors still have to make wood.

From drywall

The wardrobe from GLC is possible, but it is quite difficult. In fact it will be building structure, not a piece of furniture.

From laminate, mdf, fiberboard

it optimal materials For the manufacture of this type of furniture. Of these, the wardrobe at home can be done easily and simply. They have all the advantages of the tree and do not have its flaws.

Almost a nuance, the Fiberboard is preferably choosing density above average.

What makes filling

The filling depends on how the space of the cabinet will be distributed, where the shelves and drawers will be located. Specialists advise follow the following recommendations:

• Wet space side;
• The necessary small one - at the level of the view;
• Dry - on top;
• The most expensive is to distribute to the boxes.

The purpose of the filling planning is to achieve the smallest width of the shelves, which will be required when calculating the doors. To the distribution of the internal space of the cabinet, it is necessary to approach responsibly.

Filling the cabinet significantly affects how comfortable it will be comfortable and how many years will serve.

Cabinet

Doors - the most complex and demanding the most responsible approach detail of the cabinet. It is necessary to determine how much the flaps need and what width, with the design of the suspension and stoppers.

Note!

Than less doors In the closet, it is more convenient to use it. But at the same time risks of pumping and stroke increase. The greatest width that is allowed for sash - 60-70 cm.

In addition, the doors should not be wider than the narrow shelf, otherwise it will not be possible to get to it. It is also desirable that the sash overexpose no less than 5-7 cm.

Such necessary thingLike a wardrobe, optionally buy, it can be done independently. On the Internet it is easy to find the drawings of a variety of models of the wardrobes. Cabinet made with your own hands will be the subject of your pride.

Photo of a wardrobe with their own hands

Note!

Note!

The wardrobe can rightfully claim the title of perfect "dwelling" for clothes and homemade things, because it allows you to use valuable square meters It is much more rational than any individual stands, dressers and racks. But to get from this dwelling. maximum benefitYou need to know how to competently arrange furniture inside. How to plan zones? How to determine the dimensions of the entire model and individual sections? How to choose a "stuffing" in the form of shelves, rods, hooks and other components? What should be the location of the selected components? Let's figure out in all the above-mentioned subtleties and see the photo different options Furniture filling to successfully cope with the task.

What size should be a wardrobe

Having calculated the dimensions of the future, three factors should be taken into account:

• approximate number of things for storage + 20% on the "growing" of the wardrobe;
• the area of \u200b\u200bthe room in which the furniture is planned;
• recommendations of designers in terms of the minimum / maximum sizes of certain cabinet elements.

And if the first two nuances are absolutely individual and solved in private, then on the third you need to navigate everything without exception.

1. Depth. The minimum depth of the cabinet is 60 cm. It is so much necessary to place the shoulders with the upper clothes. Do not forget to add to the depth of 10 cm - "eat them" the coupe with the guides.
2. Width. The minimum is 50 cm. Making a closet even less width does not make any sense, since the furniture will be simply non-functional. But the maximum width is not regulated.
3. Height. Theoretically, the wardrobe can be any height, so specialists recommend designing furniture to almost the ceiling to achieve maximum capacity.
4. Doors. Sliding doors should not be wider than 120 cm, otherwise they will give a greater load on the roller system, which is fraught with its fast deformation. The optimal proportions of height and widths that will avoid the design of the design, - 1: 5.

Council. Select the width of the doors under the width of the sections - thanks to this reception, "dead zones" inaccessible in the closet will not be formed in the closet, which is often found with models that are equipped with two common doors.

How to distribute space

In order to streamline the inner space of the wardrobe, it needs to be clearly divided into functional zones. Traditionally, three mandatory zones are distinguished:

1. Top space. It is recommended to have compartments for storing seasonal clothes, hats, bedding, as well as household items that you do not use every day. Optimal solution - to take up the top space about 20-25% of the cabinet.
2. Central space. As is clear from the title, this is the most important cabinet area, intended for storing the bulk of frequently used things. To the organization of this space, you must treat with a maximum responsibility: all shelves, compartments, boxes, baskets, hangers and other components should be located in such a way that they can be unhindered to contact every day. Under the central compartments you need to take at least 50% of the wardrobe.
3. Lower space. Zone for placing shoes, bags and umbrellas. For these sections, 20-25% of the total space is enough.

What and how to store

For each type of things in the closet, it is important to find its place, so before the start of arranging its internal space, it is necessary to decide that it will be stored specifically in it - this will directly depend on the nature of the "repository" filling:

• Enclosure clothing - multi-format boxes and wide shelves.
• Encountered clothing - sections for the shoulders: For short things - branches with rods and hooks, located for each other; For long things - compartments with pantographs.
• Outerwear - vertical sections with rods.
• Underwear - roll-up drawers up to 30 cm in depth.
• Pants - fixed and retractable trousers in two typical versions: To store trousers in folded in half and completely unfolded.
• Shoes are single or two-storey shelves for low shoes and vertical side mounts - for high.
• Bags - horizontal row of hooks or stationary shelves.
• Large accessories - hanging organizers or vertical drawers.
• Decorations - roll-out trays with a height of 10-15 cm with separated cells.
• Bed linen - sections under the mezzide width from 40 cm to 70 cm.

Council. Do not forget about such important element Wardrobe, like a mirror. It can be represented in two variations: mirror doors or retractable mirrors hidden under the shelves.

Than filling the wardrobe

Now consider, what exactly can be filled with your wardrobe. To your attention the main components of the "repositories".

• Shelves are universal elements that can be species: stationary and retractable. The optimal distance between the shelves is 40 cm. It is possible to fix them as standard corners and hidden retainers.
• Baskets - stationary or dying deep compartments designed for enjoying clothing.

• Retractable drawers - standard (up to 80%) and complete (100%) extension. The most convenient in the operation of the boxes equipped with closers - this accessure allows compartments to be moved as easy and smoothly as possible.
• The crossbars and hangers are stationary elements for parallel storage of things.
• Rods - end and longitudinal holders for shoulder, which can be fixed and retractable. From the point of view of convenience, the second models are much more profitable: thanks to them, quick access to distant things is ensured.

Council. To determine the approximate length of the rod, calculate required amount Handers: On some shoulders will leave about 5 cm length.

• Pantographs are "furniture elevators", lowering and raising the rods to the required level. Can be mechanical and electrical: the first are equipped with a handle, and the second is the button.

As you can see, the most functional and spacious, but the ergonomic wardrobe is a dream that can easily become a reality. You just need to adhere to simple recommendations On the organization of furniture space - and then the perfect "dwelling" for things to you is provided.

Filling a wardrobe: video

Wardrobe inside: photo

In the hallway you need a wardrobe or clothes hanger. An ordinary wardrobe is inconvenient due to swing doorswhich block the passage, and the hanger with a bunch of clothes looks far from as aesthetically as I would like. Therefore, in recent times, they are increasingly put a wardrobe in the hallway. This species Furniture allows you to rationally use the entire useful volume - at the expense of the shelves, baskets, hangers, etc.

Types of structures

Cabinets coupe are three species. Built-in differed in that they occupy some niche and have no own walls, gender and ceiling. A similar design is made and then when you can burn part of the room from the wall to the wall. In this case, they simply order the facade (doors) for a wardrobe with a roller system and guides. Inside the partitions and are fixed / installed filling. In some parishings, the built-in wardrobe is made on the site of the former storage room, with another planning it is possible to burn part in the end.

If there is no such possibility, they put the cabinet compartment. This is a full-fledged large wardrobe with the rear wall. sidewalls, floors and ceiling. It is characterized by the design of doors and filling. Another difference is that this kind of storage systems are trying to do under the ceiling to maximize the use of all space. Yes, and it looks more organically.

Design and Design Ideas

First we will talk about what makes cabinets make. The entire design can be divided into housing and facade (doors). Case make out laminated chipboard or . The option with the chipboard is cheaper, but the designs are obtained only straightforward - this material is not lightning and the technology of its manufacture does not allow to get curvilinear surfaces. MDF - more eco-friendly and expensive material. Here from it you can form rounded faces.

Facades or doors for cabinets compartment make from different materialsFramed from the profile. Use:

• Laminated chipboard and MDF. The laminating film can repeat the texture of wood, leather, be a monophonic matte or glossy, with a pattern geometric or vegetable.

  

  The texture can be any - right up to the imitation of skin crocodile

• Glass. Clear glass Almost does not apply, but color or matte can be found.

  

• Mirror. Very common material. Drawings are applied to the surface on sandblasting technology. They can cover the mirror almost entirely, leaving small fragments of untouched mirrors, and can be applied only by fragments.

  

• Separately it is worth mentioning the photo printing. This technology allows you to transfer any image to the film. This film is then glued on the facade.

  

But most often you can meet the combined facades. Various combinations The above materials give a simple incredible amount of design options. You can develop a design for any interior and taste. Some examples in the photo below.

How to do it yourself sliding doors For the wardrobe, read.

Horizontal division - widely used

Immediately three textures - DVP, mirror and sandblast drawing

Circuit wardrobe with backlit - convenient

Plant ornament is one of the common topics

Imitation wooden surfacebut an unusual combination with different areas of "fibers"

Just and tasteful - frosted glass With horizontal division

Use even space over the door - a good idea For a small hallway