Wall hanger in the hallway: buy or make it yourself. Outdoor racks and clothes hangers: economically and fast! Homemade clothes hanger

It is the hallway see the first thing guests. This is a face of an apartment that characterizes the owner. For better design of this site, you should remember the space. The large wardrobe in this case is not appropriate. Therefore, the actual question is how to make a hanger with your own hands.

All nuances of this process are slightly lower.

Characteristic

Placing wall-mounted hangers for clothing is possible in different places, no exception and entrance hall. It can be a kitchen, or a bathroom. It is important to make an unusual addition to the interior from this product. With the right approach, the usual hanger will become a bright emphasis made in the style you need.

The product must comply with certain requirements. Stylishly looks simple, light, but durable design, with accessible and compact materials.

Fastening is different according to the method of installation work. As can be seen in the photo of hangers, highlight wall, ceiling, as well as mobile products.

Applying wall structures, the preference in the manufacture is given by the corner structure. Designers advise to combine several types. For example, it can be a wall design in combination with a support, for example, on the floor.

Important! Outdoor structures in the bathroom and kitchen do not apply, as it is inappropriate. After all, hangers occupy a lot of space, prevent rationally place other necessary items.

Products are distinguished by way of hanging. Known structures with hooks, with a barbell, designed under the shoulders. The first option will be output if you need to rationally place things, saving free space.

The advantage of the second variant in quality. After all, you can hang things on the shoulders, without fear that it will face, will lose their attractiveness.

Selection of material

The most common option is the manufacture of wood hangers. Forged constructions are popular, but they are not always suitable in the style of your interior.

Often make a metal hanger. Most often hooks are fixed with glue, self-tapping screws, magnets. You can use suction cups for these purposes.

It is worth deciding for what purposes the product will be used. If you hang up the outerwear, then the most optimal option is the use of self-tapping screws. After all, they will help withstand a big weight.

The remaining methods are used in the bathroom, or the kitchen. They will easily withstand towels, tacks.

The working process

It is worth considering what ideas are how to make a hanger. Consider the easiest option that can be interpreted differently, to connect, add your own.

Material should be prepared. Next, for the workflow, you must need a jig. For fasteners, additional material will be required, perforator. There is also a level, corner, roulette. For the drawings, make a pencil, or a marker.

The most simple manufacturer is the crochet bar. It is necessary to take a wooden plank.

Note! For a high-quality product, you should carefully choose a plate. Its surface must be perfectly smooth, without cracks, irregularities. The material must be well dried. Only after compliance with all these rules can be processed.

It is possible to notice the wooden plank with a sheet of chipboard, or MDF. It is important to take into account the length ratios that will approach your individual needs.

There should be such a distance between the holes so that the indent is approximately 5 cm. For an even location of the holes, the use of the construction level is necessary. Dowels are inserted into their surface. Self-tapping screws are maintained. It is necessary to attach hooks on the bar. Depending on the fastener material, the strength of the entire structure is determined.

Instead of standard hooks, you can use some interesting variations. Often for these purposes use old wrenches. First of all, they must be prepared for work, that is, cleaned, polished. Next, they are bent, then screwed to the bar.

Often used forks made of steel. They are also ideal for these purposes. Avoid choosing an aluminum material, as it is fragile in its structure. With a suitable material, the tooth can be given a rather interesting form.

Another option is wooden knots. And at all, it is not necessary to place them smoothly. Often paint a note mill, and hooks are placed in accordance with the location of the notes.

conclusions

Perfectly fits in the style direction of the room homemade product. Hangers are no exception. Such designs are fairly easy to do on their own, improve the standard options, supplement them with their wishes, fantasy.

Designers advise, are not afraid to experiment, combine different ways, create something their own. Such a thing will undoubtedly decorate your hallway, characterizes you as a creative and talented person.

Photo hangers do it yourself

The hallway is a place in which things are usually stored for a way out, so it does not cost without hangers. Some people are attached to the wall of the board with nails, but it looks not very beautiful. Therefore, it is best to use a floor or wall hanger, which can be constructed independently. The product, created by its own hands, will not only save the budget, but also adds the dwelling of uniqueness.

Preparation of instruments and materials

Going to start work, you need to prepare all the necessary tools: drill, scolding, screws, hacksaw, centimeter tape. It is important to have the skills of contacting them, so as not to make a lot of mistakes and not harm yourself. To give a product of a neat and aesthetic look, you will need varnish or paint.

As for the materials, you will need:

• Wooden bars or metal elements that will create a durable and reliable base capable of withstanding heavy jackets. You can use the base from an unnecessary artificial ate or from a strong lacker.
• A column suitable in size that is easy to purchase in the finished form. The cheapest option is a dry and naked trunk of a young tree (without bitch and bends), treated with a skin. Its height must be equal to 15-20 cm.
• Hooks, the number of which should be sufficient to freely be based on.

• Glue designed to reliably fix all elements, including self-tapping screws.
• So that the hanger stood tightly on the floor and did not slip, it is necessary to glue a thin rubber to its base.
• To enhance the center of gravity, it is necessary to make a shelf for storing accessories that will need to be fixed over the attachment of the crosses.

Manufacturing process

First you need to create the bottom of the hanger. To do this, pre-cooked bars need to cut in half, handle the skin and combine at right angles. So that the joints of the connection were durable and not hacked, you need to make a deepening in the width of the bar and connect all parts. Then you need to cut four bar and attach them with the help of screws to the legs and the barrel, which will become a reliable support for the hanger.

You can unscrew the screws only after the holes made by the drill are ready. This will help protect the future product from the appearance of cracks, which can lead the piece of furniture in disrepair. The diameter of the self-drawing should be greater than the drill.

For reliable fixation, you must first lubricate the holes with glue, and then screw the screws.

For the manufacture of the upper part of the design, you need to attach a pre-cooked square with hooks. You can also attach four bars to the trunk, which will be combined with each other. It is necessary to mount not at the very top, but slightly lower. The drill drill holes that are poured with selence, and then screws are screwed up. It will help the product to hold heavy things.

Having finished the creation of hangers, you need to do its design. First, the entire design needs to be processed using sandpaper. Then should be treated with a paintwork. You can paint the surface with different colors or draw patterns to get the original product.

Original solutions

You can select the following interesting options:

• Make a hanger into the hallway can be much easierIf the house has an old (sufficiently heavy) lamp. It needs to be released from unnecessary elements (wires), clean and paint. Speecually watching metallic color paint. Iron hooks insert in advance drilled holes. You can use hooks bent from durable wire.

• Will look very unusual hanger made of real wood. To do this, it will need to thoroughly dry, remove the bark from it, you should also sand. In this case, you will not have to make a stand, since the roots of the tree will reliably hold the design. But it is necessary to write and lead the roots in the proper form so that they do not interfere and look beautiful. You can use the tree branches as hooks, in advance shortering the most durable to the desired size. Such a hanger will decorate the house, and it will simply be impossible not to notice. However, to find a suitable tree - the task is not simple, which makes it very difficult to implement this idea into reality.

• Save space, but at the same time save functionality Wall hanger will help. For her creation, the bars will need, two framework boards, one board for creating shelves, metal corners, rails and hooks. To speed up the process, it is better to use processed materials. To build a design, you need to mark the place of attachment on the wall and mount two boards to it, located vertically to the floor. The length of the fasteners depends on the length of the product. It should approach the length of the shelves.

At a short distance to the vertical boards, rails are attached. From the bars below you need to build a shelf for shoes. The height of the shelf must be sufficient to sit on it. All joints are fixed with corners to increase the reliability of the design. Make a product beautiful and neat will help the plating with rails. Installation of the upper shelf begins with places of fasteners. With the help of drill, holes are made, in which the screws will be screwed.

For beauty, you can use forged corners and hooks, and the finished product can be treated with a veil or paintwork.

• You can combine hanger with a small lockerBy making deep shelves and hooks. To do this, prepare a few durable top quality boards that have previously passed processing. You can use boards from the old bed or sofa, because the wood remains durable not one ten years. It is well processed. After work it is worth making a drawing on which the size and number of shelves will be displayed. Following the drawing, you need to cut the boards, then you should attach them to the bottom shelf. The backs of the side boards are fastened to the back of the side boards, the height of which depends on the number of shelves.

It must be remembered that on the hanger there will be not only outerwear, but also various accessories, so it needs to be especially good to attach to the wall. You can use iron corners and screws, and you can screw them into a dowel.

You can decorate the finished design with a small mirrorwhich will be located on the side. If it is beamless, then you need to attach it on a solid plywood shield. It must be fixed. The mirror itself is glued to special glue, and under it is closely installed the shelf, which will serve as an additional support. If such a design does not seem safe, you can build a frame for a mirror. It is necessary to do it from a textured board, having finished it in advance by its sandpaper and covering the verse.

A little fantasy - and the simplest hanger will become an interior decoration. It can not only be painted in one color, but also to salary with cloth or wallpaper. Good for this case will suit the Decoupage technique, which will give the product an extraordinary look.

• You can decorate the corridor with a non-standard product, which (in addition to storing things) will be performed by other functions. Stool-shaped hanger will be designed to store outerwear and seats. Under the seat there will be a shoe shelf, and on a high back there will be hooks for clothes and shelf for caps and gloves.

Become a highlight of the hallway, a durable branch found in the forest or in the park. It is worth covering it with varnish and screw the hooks, and it will become a worthy element of the apartment.

• Very unusually look hangers made of water pipes. In this case, you can hang clothes on valves or cranes.
• Very economically and originally used wooden hangers, which can be mounted in the wall at different levels. Already in the products themselves, you can make holes for hooks or use stores that have a self-adhesive surface.
• Old skiing is another interesting idea of \u200b\u200bthe design of the corridor. Hook them in a fresh hone and attaching hooks on them, you can organize a storage system in a few minutes.

Clothes hangers are a mandatory attribute in every home, as otherwise it is quite problematic to arrange the upper clothes. In addition, floor hangers will be useful in the bedroom, so as not to put clothes every evening in the closet and not to use chairs or chairs. But in the store a beautiful furniture is quite expensive, so the best solution is a floor hanger for clothes with your own hands. After all, from inexpensive materials, you can make original and beautiful hangers that will significantly decorate and make your interior comfortable.

Make a clothes hanger, you can almost from any materials. But if you are going to do it yourself, it is worth come up to the choice of material.

It is best for work to work wood and plywood, these are the most practical and plastic materials with which it is easy to work. If products from them are used in the house, they will not be guaranteed to be exposed to moisture and their life will increase significantly.

Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that there is sometimes significant load on the hanger, so it is necessary to use the materials of the appropriate strength so that the furniture is not broken.

Examples of floor hangers using water pipes

When you buy wood or Faneru, pay attention to their quality, because it is the key to the fact that the hanger will look beautiful. In most cases, wooden products are covered with only a verse or varnish, so the texture remains visible on the surface.

Floor hanger in the form of a tree

It is easy to make an outdoor hanger, and for this you will not need a lot of tools and materials. This hanger is made of two plywood sheets, approximately 70x170 cm, and 18 mm thick. For the manufacture you will need only glue, jigsaw and sandpaper. The work itself will not take much time and such hangers you will not meet in any furniture store.

First you need to draw on one of the sheets of plywood contour of the future product. Make it can be simply transferred on the scale of the drawing on the fane. The most important thing is that the legs are sufficient width - about 60 centimeters. It is necessary for stability, because if you make them narrow, then the hanger will fall, if you hang heavy winter clothes on it.

In order not to draw a picture on the second sheet of plywood, you need, before starting to cut, simply make two sheets of plywood using self-tapping screws or clamps. It is best to use the clamps, rearring them as you will cut the Fan. Make sure that the sheets are not shifted and both billets were the same.

To connect the blanks and turn them into a hanger, you need to make two slots. On one workpiece you need to make a slot to the middle from above, and on the second bottom. The width of the slot must correspond to the thickness of plywood.

Both slots on the inside need to be well treated with glue, after which it is one to put one to another billet. As a result, you will find an original and beautiful floor hanger for clothing, which will remain only pollute and paint.

As you can see, the manufacture of outdoor hangers with your own hands is an easy task even for a beginner. And it can be decorated with any ways. You can simply cover the Phaneur Morilka, varnish or paint it. If you reduce the size, then a children's clothes hanger will get, which will decorate any room, especially if it is painted.

Wooden hangers from natural elements

A good designer solution is racks from natural natural materials. Or rather from the tree trunk. Such a clothes hanger is very easy to manufacture and does not require special tools and materials.

To begin with, you need to find a good billet made of dry wood, it must be completely dry, and there should be no rot. The tree breed is practically no meaning, but it is worth remembering that coniferous rocks with a large resin content is better not to use. The glue can be released from the trunk even after complete drying. It is best to use deciduous breeds with a well-branching barrel to make more places for clothes.

First you need to completely clean the trunk from the bark, trim the bottom branches up to the height of one meter, and the upper shorten, so that the bitch remains for which you can hang clothes. Then you need to completely polish the rack and clean it from contaminants, irregularities. If the wood damaged a coroede, it does not interfere, as it creates a pretty beautiful pattern that perfectly fit into the design of the hangers.

The second stage of work is the stand, as the independent tree trunk will not be able to stand. The most important thing here is to remember that the massive the stand will be, the more stable will be the hanger. You can make a stand from a thick board, it will be the best option for work. The stand can be given any shape, it can be a circle, square, triangle and any other geometric or abstract figure.

Attach the rack to the stand in different ways. For example, if the bottom of the tree is rather thick, you can simply fasten the board to it with screws. Self-tapping caps will be downstairs, so they will not be visible. If the bottom of the tree is relatively thin, then it can be fixed in the stand making a hole in it, it should be no longer than the diameter of the barrel itself. Next, just a rack with glue is fixed on the stand - this method is the most reliable.

It is worth remembering one feature of the tree trunk - it has a cone shape. Therefore, the hole in the stand is better to make it less than its diameter, and gently repel the bottom of the tree. Thus, the rack will hold well and there will be no cracks on the site.

When the tree hanger is ready, you just need to cover it with varnish, as the natural color of the tree is better to save. But if a bright hanger is not suitable for your design, you can easily use a moron or dark paint.

Original and very practical option for outdoor hangers, which is easy to make, make it in the form of a staircase. Such an accessory is perfect for the bedroom, if you do not like to use the chair or the back of the storage chair in the evening.

For the manufacture, only two vehicles with a thickness of approximately 5x5 will be needed, and a length of 170-180 cm. Also for the crossbar will need three smaller bar, the length of which will be equal to the width of the hanger. All bars are grouped or processed by the plane. So that the hanger looked beautiful and neatly, connect the details between themselves best on the spikes.

Then you just need to cover the hanger by Morilka and Lac. A comfortable and comfortable stand for clothing is ready. As you can see, such a rack for clothes made with your own hands is very simple and it is suitable for a bedroom or summer house.

Like any wooden interior item, such a stand for clothes will look great in almost any interior and it can be placed on it so that they do not remember. If you wish, you can use several shoulders for clothes, which can be hung on the upper crossbar. If the hanger is interferes during the day, you can simply take it and put it standing, as it is light and not attached to anything.

Other types of floor hangers

Despite the fact that the floor rack for clothes is a fairly simple element of the interior, but there are so many ways to do it. It is enough just to show a little fantasy and remember that the design should be stable. Otherwise, you can make racks for clothes from any affordable girlfriend.

For work, you also do not need special tools. Of course, there are hangers made on a lathe of wood, but they make professional joiners.

Remember that any personally made your interior object will be not only the next step of your skill. If you do something with your own hands, then this thing will be unique and the only one.

In addition, making the elements of the situation on their own, you not only show your individuality, and significantly save. Since even the most simple racks for clothes in the store will be an order of magnitude more expensive than the material for craft. And this is another incentive to start marshy, because handmade products are even more expensive.
Outdoor hanger, one of the easiest tasks. Therefore, you should not buy it in the store, but it is better to do it yourself.

With hangers, as is well known, not only the theater begins, but also a visit to other less pretentious institutions. Each hostess, of course, wants her house to be remembered by guests not just abundant treats, but unique furniture.

Not just a decor element

Make the subject of the interior at the same time beautiful and multifunctional is not easy. But for clothes hangers, these two points are fundamental, because a limited number of square meters in the hallway obliges to save not only free, but also "working" space.

For small rooms, only outdoor embodiments of the hangers should be considered. Why?

First, things that should be in the hallway belong to the demi-season period or to the cold season of the year. Jackets, fur coats, down jackets weigh a lot, which is why ordinary shoulders are infrequent withstanding their weight. And when there are not only the coats of parents, but also the jackets of children, the cloaks, the umbrellas of grandmothers are hanging, and the most persistent "fighters" are not maintained. "Right" floor hanger allows you to place all the necessary things, and maybe easily withstand their weight!

Secondly, winter and demi-season coats are often radically different in weight. It is not known to be released on the ring of fighters of a different weight category. The same case: if the September sewer will hang on the weight of the weights, and the fox fur coat will be angry - the mechanism will give a crack. With wonderful fur coats, they will have to wash the stains from dirt flots, and the unstable hanger will need to be repaired.

Thirdly, things are needed by space and air - they are sore without it. The absence of the required distance between several warm things generates an unpleasant odor, infection. That is why it is important to leave some space between the fur of the fur coats and, for example, Dublin. Outdoor with a strong barbell allow you to properly place almost all warm things by category without the risk of mold, unpleasant tax or suffocating smell.

Here it is, my only ...

Unfortunately, often ready-made options for outdoor hangers are designed for large-sized apartments or private houses, and the inhabitants of modest "odnuncia" or "doubles" allow you to be content with only wall fragile mechanisms: compact, but absolutely impractical.

In this case, the design can be developed independently or entrust such a task to a professional designer. He will take into account your wishes, the number of free meters in the hallway, color gamut and the amount of warm clothing.

What options to choose?

Angle

High ceilings of the hallway (in this part of the ceiling apartment can reach a height of 3-3.5 meters) allow you to make a closet that gets up to the ceiling itself. This allows, besides directly hangers, fill the space inside the cabinet with different useful insides:

• shelves open / closed;
• nominating boxes / just drawers;
• boxes / hooks.

Your hanger turns from a regular bar into a multifunctional cabinet, in which you can hide everything: ranging from shoes and umbrellas, and ending with a church for fishing or rods.

Mirror corner

One of the varieties of the corner, the appearance of which brings it as close as possible to the wardrobe (including in the issue of multifunctionality). A large number of mirrors make sense to mow into the closet only if the lighting in your hallway is supplied correctly. If desired, it is possible to add wall lamps or mini-lamps, but it is necessary to take into account that such a source of light is still not enough if you want, for example, apply makeup, or try on a new skirt.

If you still decided to install the mirror, then you need to choose the most convenient option for you: external or internal. The external mirror will have to wash more often, but there will be no problems with the light (if other luminaires are present). The inner will be in a constant twilight, but the surface will always remain clean. The choice is yours.

Hanger-hooks

The design of the old Soviet times, the design of the hook hanger is now significantly improved. We are all accustomed to the fact that the hooks are usually located on the crossbar, which is attached directly to the wall. This makes the design entirely dependent on the strength of the wall and strength of the material from which it is made. Typically, hangers of such a design leave for a bathroom or storage room: these rooms do not require large physical effort from furniture.

Meanwhile, the correct design of the floor hanger having a small amount of crochet allows you to increase the functionality, will solve some problems associated with the lowest growth of the inhabitants of the apartment. Outdoor usually imply the presence of the upper shelf, which is put on:

• hats;
• scarves;
• gloves;
• umbrellas and other necessary trifles.

This is not always the right solution for families in which there are children or for adults whose growth is 170 cm: If you came to visit, for example, a person who cannot reach the cherished feature, it can put you in an awkward position.

The solution to lay things on the bottom shelves also causes some difficulties, because pets live in many apartments: you can not adopted you.

Hanger-panel - for classic style

In this case, the only correct solution will be either a closed wardrobe, or special hooks for trivia. Of course, the whole hanger from such hooks can not consist. But they will become an excellent addition to those elements that already exist in the lice design.

Actually, the wardrobe

The wardrobe is now one of the most common, most expensive and most, unfortunately, impractical options. What is the snag here?

• Standard wardrobe occupies too much space. It is an excellent option for the bedroom or hall, but too much free space remains in the hallway. Most wardrobes are designed according to a single principle: two doors + several shelves + several penalches + a few hooks. Any additions are considered unnecessary because this model has been fire and water.

• The assembly of the wardrobes makes them very fragile for such a conflict zone as an entrance hall. Agree, on this small area of \u200b\u200bspace, anything can happen: a soccer ball will break the outside glass of the cabinet, the cat jumps into the bottom penalty, and the door will slam the neighbor, the neighbor behind the salt will accidentally pursue the door with his shoulder, and it will throw out the rut. Moving structures are always not the best solution for rooms in which an active movement occurs.

Open hanger-shop

This is one of the most conservative and most acceptable solutions for small apartments. Hanger-shop, as a rule, consists of the following modules:

• several top penalties (options with open shelves or antlesole models);
• several lower shoe penalties (open shelves or extending shelf boxes are also possible;
• the basis with the attached various models of hooks and a crossbar (sometimes a mirror is added);
• shop.

These are rarely metallic or plastic. The design of this is a somewhat old-fashioned, but very practical aggregate are engaged exclusively to people who know a lot in the organization of space. Products, as a rule, made of wood, hooks, base and crossbars in this case should be metal or wooden.

In addition to the strength, it is good for apartments where older people or disabled live. A stool next to a wardrobe occupies a multibuably many space. Hanger-shop is more compact. The option, about which, between us, you can think ...

Hanger-cropper

"Minimalism is our everything," the phrase has become almost the motto of postmodern interior design. Small-sized apartment with small-sized rooms and small-sized furniture needs a small-sized hanger.

On the hanger, the crossbar may fit all that the pair is needed, which is assigned a cozy "odnushka":

• several warm coats;
• several down jackets;
• demi-season sequins;
• sport jacket;
• vest;
• scarf;
• multiple hats.

On the stand below, there are several (6-8) pairs of shoes (for one season). True, the shoes will have to remove from time to time (alternation of the summer and winter seasons), but the same problem appears in the case of a wardrobe.

Remember the simple truth: the more spaces appear for things, the more things try to fill this space.

Council

When buying a crossbar, pay attention to the material from which the crossbar is made, holders and on the attachments themselves. Rod dollars withstand the weight of the coat and jackets, and still all the trempel shoulder, which you will cling to this crossbar.

At the bottom there may be an extra shelf for shoes made of material that will not be too marked (pay attention to the color).

Chose the type, but still confused about the material from which it will be done? The material depends on both the appearance and its strength.

What to choose from?

Plastic, Tree, Metal: What is more practical?

Plastic

Hangers made of plastic are the most impractical of all that offers us the furniture market. Weak strength, the inability to attach heavy and durable mounts, fragility. Things out of plastic are now more less common in the rooms where the child can be.

Plastic furniture offers the abyss of designer solutions:

• mixing colors;
• the opportunity to melt and create original forms;
• madness and gloss.

This is especially true for manufacturers of cabinets - the compartment: the more beautiful the furniture, the faster the owner there is. Meanwhile, after a few months, the same owner is forced to get a warranty card out of the box, because a wardrobe or shelf of plastic will show their real person in a few weeks of operation: will fly away the shiny surface, but even worse: the door will fall off ...

Sad perspective, isn't it?

Metal

Good strength, but not too high degree of practicality - all about metal cabinets. Metal designs can withstand the upper clothes of a giant, and a dozen of the hardest ducks, and many pairs of boots ... However, the obsessive shine and too sharp response to temperature changes may not be too much like an outdoor coating and lining of the walls.

Often because of the too sharp drop of temperatures (condensate formed on the hanger) an excess of moisture begins to decompose the walls of the wall near the hangers: wallpapers, "flows" plaster, appear unpleasant tracks on the paint. Sometimes parquet or linoleum can be deformed. Moreover, the deformation is caused not so much by condensate as the large weight of the hangers: metal structures weigh to several tens of kilograms.

External strength is very attractive for outdoor hanger. But is this characteristic of the cosmetic repair of the hallway?

Wood

The latter, but not by value, material.

1 First, quality. Wooden furniture (from the real tree, and not recycled sawdust) is known for its strength.

2 Secondly, good interaction with the external environment. The tree does not give in to the internal deformation, and does not spoil the floor, the walls, the ceiling. "Spirit", "Condensate" are words that are not known wooden furniture. When you buy a hanger made of durable wood, know that it will not spoil the color of your walls, does not deform the parquet and will not paint the ceiling.

3 Third, the tree is "healthy" material. The trend towards improving the environment most fully manifests itself in the furniture industry: the interior items began to do from environmentally friendly materials. This is not the cheapest option. But, on the other hand, it may be safer for your health and health of your child than wooden furniture. Natural material promises the absence of an unpleasant smell - a fairly important criterion for closed hangers. Winter things that should be kept in this improvised storeroom long spring, autumn and summer months (even if they are packed in covers) absorb unpleasant odors that produce furniture. For an ecologically clean tree, this problem does not exist: you can forget about naphthalene. Clothing will save the freight look and the "commodity smell".

4 Fourth, wooden hangers look very profitably, for example, with coats for keys or wooden baskets for umbrellas. It is very difficult to choose the corresponding color schemes and the design of the little things for furniture from plastic or, moreover, metal. They have to buy or complete, or make individual elements to order after you have decided on the main accent (in the case of a small hallway, this emphasis will almost always be a hanger). Tree is well combined not only with other wooden products, but also with furniture made of plastic and metal.

Hanger-rack, hooks on the wall, shoulders in the cabinets are comfortable and very optimal attributes in the house. To save space in the hallway, it is advisable instead of racks to establish these interior items. There are many original ideas with which they can be created with their own hands. Applying personal preferences in the color scheme, from any material, on any subject (which is close to you and like, for example, wildlife) and, accordingly, any form. The quality and characteristic properties do not ignore the option acquired in the store, if you approach manual work with the mind. Undoubted advantage will be the fact that the hanger in the hallway will be different with their own individuals, uniqueness will be with minimal material costs. It is also important that it will be possible to make options that are most suitable for the design of the entire premises that will be harmonized with him. The personnel creation of comfort in the house is a truly exciting occupation.

The main functions that this multifunctional interior thing performs:

If there are built-in shelves, they can store items, there are also options with shelves for shoes and hats.

In addition, there are models that apply as an element of decor, for decorating and give a certain charm to the interior. For direct purpose, they are not used and are performed from fragile impractical materials.

Materials and tools

The choice of material depends on your imagination and desire. It can be:

You can also put the glass, chipboard or cardboard. Each modification has its advantages and features. Metal combination with wood, silicone coating to avoid sliding.

Since there are different types of fabrics, it is advisable to maintain their neat species to make it yourself or acquire hangers from different materials. It is important to take into account the size (for children they have smaller parameters).

Tools sufficient for manufacture: Roulette, hooks (from different raw materials), soldering lamp (heating device), jigsaw, needle with handle, grinding, hand saw, screws, screwdriver, pencil, fitting, screwdriver, measuring instruments, drill, drill , Morilka, selflessness. In some designs, all listed tools are not at all necessary.

Types of design and design

There are 2 types of structures: designed for storing wardrobe items inside the cabinet and outside it. The first type includes the so-called "standard model", that is, the hook shoulders. They fit into the closet, the hook is placed on the crossbar, things hang on her shoulders. In such a model between the side of the sides, they make a crossbar in order to translate the pants (skirt) through it, which makes it more multifunctional. Some are made with recesses so that you can cling to your clothes with loops and straps.

The second type includes those that usually leave coats, jackets, raincoats, fur coats:

Tree hangers

Wall design

Well fit into almost any interior design of wood. In order to start work, you need to decide which size and height hanger you need. Based on this, disconnect the appropriate piece of the board. The jigsaw drink the rounded edges with smooth lines, after which they must be pulled out by sandpaper, first large, and at the end of small grain. A plate need to be treated with a soldering lamp or above the gas burner. Held the resulting workpiece to the wall, for this there are 2 receptions:

• On the back side to attach the ears from the metal. For fixing long screws in the fastener, drill holes;
• Billet fix immediately to the wall, drilled through holes.

The completion step hooks must be fixed with screws.

If you want to make a wall hanger more roomy and to fit more things, the hooks should choose triple. Unusually and beautiful will look at the old old.

Outdoor design

The natural pattern, present on the wood, thanks to the veil, will gain clearer contours. To the bottom, made with your own hands, glue the rubber so that it does not slide and did not scratch the parquet.

From copper pipe

Copper products are always relevant and have a decent appearance. To perform work with your own hands you will need: copper pipes: 60 cm. - 4 pcs.; 150 cm. - 2 pcs.; 90 cm - 1 pc.; Copper tees - 2 pcs.; epoxy adhesive; Copper corners - 2 pcs.

For the manufacture of the base, it is necessary to connect 2 copper pipes (60 cm) epoxy glue using a tee. Make the same for 2 other pipes of the same size.

To the pipe (90 cm) attach 2 corners (subsequently it will perform the role of the crossbar to which the clothes should be hung). The next step is to insert 2 pipes (150 cm) into tees and the top of the pipes to connect with the corners.

After the glue dries, the product can be used for its intended purpose. It is also permissible to add a wooden stand, attaching legs on it and operate it for storing shoes.

From leather belts

The belt can serve not only as a stylish accessory, but also as an interior object. For the manufacture of hangers from an old leather belt, it is necessary to cut the fastener from it, giving the ends of oval shape. Then combine the 2nd end of the belt and at a distance from the edge of approximately 3-5 cm to do with a sewing hole. Make a wooden peg, diameter less belt width. The belt is folded in half in the form of a loop and secure on the wall with a self-tapping screw or ordinary nail. Praying with reliable glue glue at the base of the loop (where the nail is located).

You can also make 2 such loops on a symmetrical distance from each other and in the loop to turn the crossbar. Clothes can be hung like on the loop themselves and pegs or crossbar. Such a hanger looks very stylish and improving it in different ways, adding bright appliques, decorations, additional elements, etc.

From branches and cuts

The most simple and financially favorable model is made of wood and stem branches. Such a hanger will bring the element of wildlife into the design, give the atmosphere of a country cozy home, work will not take much time and effort. Materials can be found in the park or forest. With the help of a secaterator, it is enough to crop extra branches, the remaining the role of hooks. A massive wooden slice will suit as a backup for outdoor hanger. Courra can be cleaned, paint into any color or left unchanged. The trunk with branches can be cut into sections. Next, you should hang them on the wall on the board or frame. The result is a multifunctional convenient element of the interior. The trunk can also be suspended near the window or under the ceiling as a support and a peculiar crossbar for the shoulders.

From pallet

The main subject for such an idea is a wooden pallet pallet. Before proceeding with the manufacture, it is necessary to remove all the extra elements (bottom, side wall) with a saw. A portion consisting of 4 long skins bonded from the sides will be required. The pallet must be carefully cleaned from the smells, eliminate all the irregularities of sandpaper. After the surface is smooth, the product must be painted with paint for a tree and top covered with varnish. With the help of the marker, mark the places where the hooks will be attached. The pallet hanger is quite massive, and the mount must be chosen reliable. Hooks attach to the pallet, after which, using self-tapping screws and drill, hang a pallet on the wall. Additionally, you can nail the shelves and holders.

From longitudinal and transverse boards

This roomy model will fit shoes, hats, jackets. To start on the wall, lock 2 longitudinal plates: bottom and top. Length is determined depending on how wide the shelves you have conceived to do. With the help of screws to longitudinal boards, fond of transverse bars. The interval should be sufficient for clothing storage, the quantity can be any - select at your discretion. In order to make even fasteners of the items, use the level. For the construction of support, use bars (hereinafter this will be a shoe shelf). Metal corners secure compounds. Also with their help, fasten the shelf from above (for hats, hats, gloves) perpendicular to the longitudinal boards. The final stage will be fastening hooks and decoration.

The process of manufacture of hangers

From the sheet of plywood to cut the pattern and transfer the marker to the bar. In the inside, drill 2 holes, pubesome cutting the circled pattern. Denote a hole for the hook, then drill (diameter 5 mm). To cut out in the inside of the resulting hole of the recess (using a file with a large notch), put a nut into it. Reception is needed in the future in order not to form the hooks during operation. Split a narrow hand saw of 20 centimeters of wire, rounded with a file with a file, one end, from the second to remove the champ and cut into the thread with a metal cutting radiant (length of about 5 mm.). Drill a hook hole that you want to bend, then insert and firmly fix the nut.

Decoration

Unusual design solutions are able to transform any, even an unsightly hallway. To maintain the classic style, the hanger can be seeded with skin (skin substitute) or save the natural beauty of wood, if it was used. Hooks paint bronze or golden paint. Handers beat velvet, satin cloth. For Country, use additional accessories in the form of horns, it is permissible to cut out of the tree. For retro style, color can be artificially used, the decoupage technique is used for Provence. In the role of prints, stick or draw flowers, images of birds, landscapes. In the modern interior, experiments, unusual forms, original accessories, silhouettes, complex intricate patterns are admissible. You can decorate and give originality with rhinestones, sequins, handmade decor, drawings, bows. Apply images of favorite cartoon characters, TV shows, books.

• To avoid cracks on wood - before screwing the screws, the holes are recommended to drill a drill.
• The diameter of the self-press should be more than a drill. Holes to fill in advance with glue, and then screwed the self-tapping screw - so the product will be able to transfer a lot of clothing weight and will be more wear-resistant and strong.
• For metal hangers, use paints and coating, opposing corrosive processes.
• At the planning stage, it is imperative to take into account the size of the wall, think about how exactly you will fix the workpiece with the material from which the wall (concrete, wood, plastic) is made.
• All wood blanks must be treated with a grinding machine or emery paper, and at least 2 times: first large grain, and then fine grain.

Video: hanger in the hallway do it yourself

Photo Gallery: hanger in the hallway do it yourself

White hanger in the hallway.