INSTRUCTIONS AND PROPHECIES OF THE Blessed MOTHER ALIPIA GOLOSEEVSKY, Kyiv...
Fashion trends in interior design show a return to the classic style. Correct lines and well-balanced proportions are something without which it is impossible to imagine an interior in classical style. New sliding sliding doors from MDF from ARISTO, created specifically for classic interiors that will win your heart at first sight with their naturalness and elegance. Laconic features, strict forms will give the room both magnificence and representative appearance.
Sliding doors with MDF facades in a classic style can be used both in built-in wardrobes and in freestanding wardrobes. Sliding classic MDF compartment doors are presented in three collections: FLORENCIA, VENECIA and VERONA. Each of these collections has 10 profile shades, 9 door models, 8 canvas colors. Compartment doors are made in popular wood decors, and the vertical profile, matched to the color of the leaf, is a continuation of the door.
SILENCE AT A QUIET HOUR
Morning preparations will not disturb your family's sensitive sleep. Classic doors are equipped with low-speed rollers with Japanese bearings, they are able to withstand a load several times greater than the weight of the door, provide silent running and smooth sliding.
QUALITY FROM THE MANUFACTURER
Turning to the manufacturer, you get the quality and reliability of original components, thereby eliminating the possibility of installing a fake. Only genuine ARISTO fittings will be used in your product.
SAFETY FOR YEARS
The harmonious work of the components guarantees the operation of the ARISTO sliding system for decades. The compartment doors use a thick-walled European standard aluminum profile with reinforced stiffeners. Your classic doors will not pop out of the grooves and will not bend.
NO SCRATCHES
During operation, the handle of the cabinet is not overwritten and retains its color. The finishes are environmentally friendly: the wood shades use first-class German and Japanese film, the metallic colors use an anodized finish that is resistant to animal claws.
WITHOUT DIFFICULTIES IN CARE
Most often, debris and dust accumulate in the lower rail (which can prevent the door from moving smoothly). ARISTO has no such problem! The technical groove hides a patented seal that prevents dust and other debris from entering.
Collection FLORENCIA- this is nobility without frills. Geometry of forms, symmetry and proportionality. It is used in interiors with elements of the classics: columns, pilasters, rosettes, cornices, stucco. The peculiarity of the collection is that the rhombuses on the mirror stained-glass window are made using the diamond engraving technique, making the door airy and light.
Simple graceful patterns that are located on the border of the elements will emphasize the sophistication in the design of any wardrobes. It is safe to say that the sliding doors of the FLORENCIA collection are designed to turn doorways into a real work of art.
Collections VENECIA- lightweight classics with hints of early modern for sophisticated creative natures. Playing on an achromatic scale gently accentuates the texture of light wood with a silver touch of patina, especially elegant in light colors. The peculiarity of the collection is in an uncomplicated twisted ornament framed in classical milling, repeated in mirrored stained-glass windows. The drawing is made by sandblasting on the reverse side of the mirror - amalgam.
The advantages of the VENECIA collection include its unique ability to visually expand the space and fill it with light. With the help of sliding doors of the VENECIA collection, you can transform the interior of any room, whether it is a chic cottage in the country or small apartment in the old building.
VERONA is a strict and harmonious collection that successfully combines straight modern forms and graceful elements. emphasizes impeccable taste owner who gives Special attention practicality and comfort. Allows you to use compartment doors in any style, from eclectic modern to strict classics. The peculiarity of the collection is that only a wide bevel along the perimeter is used to finish the mirrored stained-glass windows.
Classic VERONA sliding doors combine laconic lines and impeccable surfaces that perfectly emphasize warm shades. valuable breeds wood. The VERONA compartment door is based on high-quality MDF. Large size range - different door heights and widths allow you to install the same doors in doorways different widths.
Door dimensions:
Opening height for compartment doors: minimum - 1840 mm, maximum - 2848 mm.
door height: minimum - 1800 mm, maximum - 2808 mm.
door width: minimum - 600 mm, maximum - 1000 mm.
H pr. - opening height
H motor - door height
L - door width
h - panel width between contour milling
f - panel height between contour milling
The classic interior has always been associated with expensive varieties wood, luxurious textiles, genuine leather. However, thanks to modern materials, the classics are available on a smaller budget.
Design solutions and the choice of materials are responsible for the visual and tactile components, but there is a less obvious and no less important aspect of the classics - the quality of workmanship: durability, quiet operation of mechanisms, reliable construction. The profile is made of primary aluminum alloy, the rollers ensure quiet running and ease of sliding, withstanding 110,000 opening cycles and a load of up to 80 kg.
Classics, made in a modern manner - this is how you can characterize the new sliding doors made of MDF from ARISTO.
Types of milling:
| FLORENCIA | |||||||||
| VERONA | |||||||||
| VENECIA |
Changing the pattern when changing the width of the door
Changing the pattern when changing the height of the door
Color palette:
| Patina ash 29 | Patina ash 27 | Linden oliviera | Venetian oak | Wenge tabacco | European walnut | Nutmeg | Teak |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
In each collection of doors, the color of the leaf and the color of the profile are thought out.
The following profile colors are used in the collection:
Profile C
| white oak | matte gold | Oak smoky |
 |
 |
 |
| Bronze brilliant | French walnut | Italian walnut |
 |
 |
 |
| Oak gray | Champagne matte | Wenge dark |
 |
 |
 |
FLAT profile:
| Wenge dark |
 |
Door structure:
Note: at all classic compartment doors on the substrate ( inner side doors) only HDF white.
Functional and beautiful furniture- a guarantee of comfort and coziness in every home, so the choice of such interior items must be approached carefully. But what to do if there was no wardrobe suitable for design or size in the store? Then the assembly of the wardrobe can be carried out independently. But for this, you should learn how to make doors for a sliding wardrobe with your own hands, and then install them.
A closet of a compartment design is a system, the acquisition of which will make it possible to successfully plan the space of a room, emphasize the features of the interior, and solve the issue of storing personal belongings. As soon as such furniture appeared on the domestic furniture market, buyers immediately fell in love with it for great amount merits.
Many do not dare to assemble a closet on their own, but in fact it is not so difficult if you prepare and divide the work into stages. You should start with the purchase of the necessary materials, the volume of which depends on the chosen size of the structure. Therefore, the first thing to decide is what material to use and what dimensions the structure will be.
To create compartment furniture, the following materials are used:
- Chipboard - belongs to the category of common and affordable materials for the manufacture of doors for a sliding wardrobe. chipboard is varied color scheme, practical, easy to cut. If you decide to assemble a sliding wardrobe with your own hands without experience in such matters, opt for chipboard;
- MDF is a more expensive material than chipboard, but it has higher operational characteristics. MDF is afraid of moisture, under the influence of which the film can lag behind the base, which will significantly worsen the appearance of the furniture. But in general, the 2-door wardrobe made of MDF looks very dignified;
- solid wood is a durable, incredibly beautiful, wear-resistant option. But it is not cheap, and to work with natural wood Only an experienced craftsman can do it. If you are a beginner, it is better to choose a material that is easier to work with - chipboard or MDF.
The dimensions of a particular cabinet are selected for the room in which it is planned to be installed. Look around and take measurements to understand what length, width and height of furniture will be most successful. The height of such furniture may vary.
Models custom sizes made to order or independently. Experts insist that in small rooms the closet must be made as high as possible. This will allow you to fit the maximum number of things into it.
Front options
Drawing and detailing
Today, sliding wardrobes are popular among residents of small city apartments and owners of spacious country cottages, because they have high functionality, practicality, serve long time without breaking, retain their external attractiveness for a long time. You can fit such an interior item into almost any size, style room. And to spend the minimum amount on this Money, make furniture by yourself. How to make wardrobe doors and what is required to start assembling wardrobe doors? Drawings and drawing the details of the future design, indicating where this or that fastening will be performed, will significantly speed up the work.
Part preparation
To save money, many people are interested in whether it is possible to do without the help of experienced furniture makers and how to make do-it-yourself wardrobe doors. To begin with, the preparation of the installed parts is carried out. After the most relevant material is selected (chipboard, MDF or natural wood), purchases of accessories are completed, you can proceed to work. You will need to create a reliable frame from pre-prepared parts:
- two side walls;
- lid;
- bottom.
Shelves and storage systems will subsequently be mounted inside the structure.
A sheet of selected material is cut using special equipment, which cuts out the described details of the future cabinet with high precision. If there are no special tools for this, you can order cutting material from professionals. After cutting, the parts are processed, covered with end caps to make them more aesthetic. Next, we will tell you how to assemble doors and get a full-fledged piece of furniture with a minimum of costs.
Sash design without filling
Profiles can be different, therefore they must be measured individually
Assembly
When the details of the future design are prepared, assembly can begin. How to assemble a wardrobe without mistakes? For this, a detailed diagram assembly and installation of shutters on a sliding wardrobe. Then, using a drill, you need to organize holes in the sides, roof and base. Its individual parts are connected into a single frame with the help of special fasteners. To increase the maximum level permissible load on the cabinet, the joints of the base and the top cover with the sidewalls of the structure are reinforced with special metal corners. Rear end furniture closes thin chipboard sheet, and supports are attached to the base.
You will also need holes for the pins in the side walls of the furniture. This will be required for the subsequent installation of shelves inside the product. If necessary, storage systems of a certain kind of things are mounted inside the structure: vertical crossbars with hangers, a trouser rack, and the like. If the assembly stage is completed, proceed to the most difficult. It is the installation of doors that will be the most responsible process in all work.
Assembly diagram
Mounting profiles and frames
If you have completed the assembly of the sliding wardrobe doors, you can proceed to the installation of the profiles and the frame of the structure, along which the sliding canvases will move. However prerequisite is to set the door leaf exactly to the level, otherwise problems will arise during the subsequent operation of the sliding wardrobe, and the level of comfort for the user will be low.
After measuring the length of the cabinet from the inside, using a hacksaw, cut a profile of the same size and fix it on the top and bottom covers with a screwdriver and self-tapping screws.
In order to prevent damage to the profiles, experts recommend using any convenient support during the organization of holes. For example, you can use a table or chair for this purpose. And the holes made should be carefully sanded with sanding paper. Holes should be organized on the profile with a step of 50 mm, this rule should not be violated so that there are no problems during the operation of the structure in the future.
For secure fixation lower profile it is worth organizing similar holes for self-tapping screws, but you should not rush to fix the guide inside the structure. It is important to choose the right place for its attachment. It is shifted inside the cabinet by 20 mm, since the depth of the furniture will decrease by the width of the compartment doors. Sometimes it happens that the doors are set too deep. This spoils the appearance of the furniture, reduces its aesthetic qualities and comfort.
You will also need to mount the latches so that the doors stop in the closed position and a gap does not form with the sidewall. The stopper is installed in the groove of the lower rail. To mount the latch in the required place, the compartment doors are tightly closed, after which a mark is made on the lower rail for the center of the wheel. A stopper is inserted here, which is easy to move with a flat screwdriver.
A silicone seal is used to install the mirror in the profile.
The mirror is inserted into the profile frame
Three holes are made in the vertical longitudinal guides
Profile drilling
The frames are fastened together with self-tapping screws.
Lower profile fasteners are also fasteners for lower rollers
Roller attachment
Guides for the door leaf are fastened with self-tapping screws with press washers
Door fixing
Next, we describe in detail how the do-it-yourself installation of the sliding wardrobe door takes place. Order phased assembly doors and properly selected tools are largely determined by the type of door being manufactured and the specifics of its fasteners on the furniture body. It can be one of two models:
- hanging;
- rail.
suspended
Roller
Suspended
If you have decided to make hinged doors, then experts recommend installing doors on a sliding wardrobe with your own hands by studying the specifics of working with such systems. The 2-door wardrobe with suspended canvases has a special compartment mechanism, which is not mounted inside the structure, but superimposed on the facade. It consists of two guides, but the most high load falls on the top rail. Hanging mount sliding systems allows you to veil the ends, roofs of the side facades from the eyes behind the doors. As a result, the design after installing the cabinet doors looks incredibly concise, elegant, beautiful.
Hanging door fixing
Rail
The description of the installation of rail structures with your own hands differs from the description of the stages for suspended ones. The peculiarity lies in the fact that the rails are mounted inside the cabinet frame. At the same time, the lower one should be hung a little with an offset inside the cabinet, since it will have the highest load.
You need to hang rollers on the canvas, with the help of which it will move in the rail. Next, the canvas must be very carefully inserted alternately into pre-installed guides. To do this, enter upper part doors into the guides, after which we put its lower part.
To check the doors for perfect vertical installation, you should use a spirit level. If the work is done carefully, the need for adjustment at a later time will disappear.
Experts insist that the rail doors on the cabinet should not be placed at a corner, as this can provoke profile deformation. Whatever design is chosen, do not forget that limiters will definitely be required. Such a detail must be attached to the cabinet door.
The video provides instructions phased implementation work an experienced craftsman, which will once again demonstrate how to put the doors on the closet. After reviewing it, you will know exactly how to install the sliding wardrobe door, and the instruction with the photo will help facilitate this process.
Roller mount
Sliding wardrobes, not so long ago considered completely exotic interior items that could only be seen in glossy catalogs or in very “rich” apartments, gradually entered the everyday life of the average family. Such furniture designs combine practicality, spaciousness, and economy. usable area, and plus to all this - they fit very well into the interior of the room, often becoming its central design element.
And yet, if you look at the price lists of companies involved in the manufacture and installation of wardrobes, sometimes the prospect of such an acquisition looks somewhat frightening. Therefore, many owners who know how to hold carpentry and metalwork tools in their hands have questions - is it possible to make such a piece of furniture on their own? It turns out that this is quite possible. The biggest difficulty is the sliding door design. However, this should not be frightening - in specialized stores you can purchase special system kits that will help you assemble beautiful and functional doors for a sliding wardrobe with your own hands, of course, if diligence, accuracy, and a clear sequence of all technological operations are applied.
What is included in the wardrobe door kit
This article will not consider the installation process of the cabinet itself with shelves, side walls, drawers, etc. The point is completely different - the defining element of such a piece of furniture is precisely. By and large, no matter how paradoxical it may sound, a closet may simply not even be a “closet” in the literal sense of the word.
A variety of wardrobe options, which sometimes are not even "closets" So, with a movable door structure, you can fence off a long niche in the wall, placing it in the resulting space, like regular shelves, and racks, bedside tables, etc. Often, such a partition separates the end part of the room, along its entire width, from wall to wall, and in height - from floor to ceiling. And the resulting mini-room can serve as a spacious closet, as well as a pantry, and sometimes even a small office. A similar design is also used for installation in the corner of a room or hallway - as a result, a triangular “closet” appears at the disposal of the owners, which can be used both as a closet and for other needs, for example, even for “home parking” of a bicycle.
In a word, there can be an incalculable number of options. But they all have one thing in common -. Properly mounted sashes move effortlessly along their guides, alternately allowing you to open one or another section of the “cabinet”, and in the closed position, tightly, without gaps, adjoin the vertical planes framing the structure.
Doors for wardrobe
It should not be assumed that numerous local firms engaged in the manufacture and installation of sliding wardrobes use some of their own developments or mechanisms. In the vast majority of cases, ready-made systems are used for this, which can be purchased at furniture fittings stores. Usually they represent a certain set of metal (more often aluminum) profiles and necessary components: roller mechanisms, plugs, gaskets, jumpers, fasteners, etc. These systems help to collect frame structure doors and the mechanism for their movement, but the internal filling, each master is free to choose his own - mirrors, transparent or tinted glass, plastic, laminated fiberboard or MDF and other materials.
There are many such systems for wardrobe doors. They can differ in the configuration and material for the manufacture of profiles, the principle of mounting parts, the level of complexity of the roller mechanism, the adjustment system, etc. In our publication, the Aristo system will be considered as one of the most popular, proven to be reliable, and quite simple to use. self-assembly. In addition, it is pleasant to realize that these are the products of our domestic manufacturer, which has won recognition abroad.
Profiles "Aristo" are made of primary aluminum, have a well-defined geometry, which allows you to assemble door structures with high precision. The system implies sliding doors, the load from which falls on the lower roller. It is equipped with a metal rolling bearing that does not require lubrication during the entire service life, and ensures smooth and silent movement of the sash along the guide without much effort. The upper rollers play a stabilizing role, hold the web in a vertical position and ensure its smooth movement relative to the upper guide.
The manufacturer of the kits claims that the resource inherent in the mechanism when correct assembly will be enough for a hundred thousand (!) Closing and opening cycles - an indicator more than impressive.
The manufacturer offers a wide range color design aluminum profiles - it is possible to mount a structure that fits perfectly into the interior, without standing out, or, conversely, contrasting sharply against the general background.
Wood-like profiles are covered with a high-strength two-layer laminating film, and monochrome details get their shade using anodizing technology.
Aristo profiles make it possible to manufacture sliding doors filled with glass (thickness 4 mm), compositions of glass with plywood or fiberboard (thickness 6 or 8 mm) or from chipboard, MDF panels (thickness 10 mm). The maximum dimensions of the door can be: up to 1500 mm wide, up to 3300 mm high, the permissible weight of one leaf is up to 160 kg.
What are the main components included in the Aristo system (the option with guides for two or more leaves is considered):
| №№ | Illustration | Dimensions | Short description |
|---|---|---|---|
| 1. | Side stand-handle open type, asymmetric, profile C. | ||
| 2. | Side stand-handle closed type, symmetrical, profile H. | ||
| 3. | The upper guide profile (track) is two-track. | ||
| 4. | The lower guide profile (track) is two-track. | ||
| 5. | Top door frame. The channel for screwing the assembly self-tapping screw is clearly visible. |
||
| 6. | Bottom door frame. The same mounting channel for the screw, and the high profile shelves create a niche for placing support rollers in it. |
||
| 7. | Medium door frame without additional fixation with a self-tapping screw. It is used when using several fragments of filling in the case when reinforced fixation of the jumper is not required - it will be held by the filling panels (for example, if hard chipboard or MDF 10 mm are used). |
||
| 8. | Medium door frame with self-tapping screw fixation. It is able to give additional rigidity to the frame of the door. It is advisable to use when used as fragments of glass or mirror filling, or when the dimensions of the entire door leaf structure are significant. |
||
| 9. |  | Direct emphasis. Optional element. It is used to frame the vertical sides of the opening at their junction with the walls. |
|
| 10. | Shape emphasis. Optional element. It is used to frame the vertical sides of the opening, if they are walls made of chipboard panels. |
||
| 11. | P-profile. Optional element. It can be used for framing the ends of chipboard panels used in the installation of the cabinet structure, in places where they adhere to the floor, ceiling, walls. |
||
| 12. | - | The roller is top symmetrical. It is used when using closed vertical H profiles. |
|
| 13. | - | The roller is top asymmetric. Used when using open vertical profiles C. Each sash requires a set of two rollers. |
|
| 14. | - | Lower support roller with adjusting screw. Each sash requires a set of two rollers. The AB74 adjusting screw has a 6mm Allen head. |
|
| 15. | - | Assembly screw AB75, with self-tapping working part. Head - for an internal hexagon 6 mm. One screw per connector. |
|
| 16. | - | Spring stopper. Optional element. Provides locking of the door in the closed position. |
|
| 17. | - | Silicone rubber seal. It is laid along the perimeter of the door filling inserts. It differs in size - a seal is available for inserts of 4, 6 and 8 mm thickness. When using filling with a thickness of 10 mm, the seal is not used. |
|
| 18. | - | Schlegel is a self-adhesive strip made of plastic and pile. It is glued along the entire height of the door leaf from the end part - for this, a special groove is provided on profiles C and H. Schlegel softens the blows of the sash against the walls of the cabinet, and when the door is closed, it prevents the penetration of dust. |
There are several more items that can be purchased at will - closers, magnetic stoppers, locks, end caps for profiles, etc. But they no longer directly affect the process of assembly and installation of wardrobe doors in question.
The principle of assembling doors for a sliding wardrobe with the Aristo system
In the configuration of profiles and fittings of the Aristo system, everything is thought out, so the installation of the door structure should not cause great difficulties.
A schematic diagram of the assembly of one door leaf with vertical profiles of type C is shown in the drawing. Hereinafter, the numbering of profile and fitting elements is observed in full accordance with the detail table above.
Profiles 3 and 4 are fixed to the ceiling (cabinet lid) and floor (cabinet base) respectively, and are fixed parts of the system.
The installation of the door leaf structure is carried out using assembly screws (pos. 15). #14a shows the bottom roller adjusting screw.
The drawing does not show the option of the central horizontal jumpers, if they are needed. But their installation is fundamentally no different. They are either simply nested without additional fixation (on uprights from the inside there are special bumpers for precise centering), or they are fixed on the assembly screw according to the same principle as the upper crossbar of the door.
Below is an assembly drawing for the option using a vertical profile type H.
There is no fundamental difference - just a different, symmetrical type of upper rollers is used for these profiles. True, there will still be differences in the calculation of dimensions and in the installation of upper and lower guide profiles (runners).
Calculations of the dimensions of the doors for the sliding wardrobe of the Aristo system
The assembly of the door will only turn out to be of high quality if careful, to the millimeter, calculations are carried out, and a very accurate preparation of the parts will be made according to the obtained dimensions. No negligence, calculations “by eye” are not allowed - this will certainly lead not only to a sloppy look, but also to distortions and even jamming of the door structure.
Calculations are carried out in the following sequence:
- The exact dimensions of the opening into which the door structure will be installed are determined.
The diagram shows wall structures, floor and ceiling, but it can also be the walls of a mounted cabinet - the principle does not change from this.
Initial dimensions - the length and height of the opening in which the movable door structure will be installed At the output, we have two values: the length of the opening - Lp and its height Np, from which further counting will go.
It is extremely important to pay attention to the fact that the upper and lower borders of the opening must be strictly horizontal along their entire length. If the deviation from the side walls from the vertical, although highly undesirable, can still be somehow compensated decorative trim, then even small deviations from the horizontal will lead to looseness or jamming of the movable wings.
Often, in order to compensate for small irregularities in the floor and ceiling, and to facilitate further fixing of the guide profiles, even panels (strips), for example, from chipboard, are mounted from above and below along the entire length of the opening. In this case, the height of the opening is measured after the installation of such linings, or their thickness must be taken into account - subtracted from the total height of the opening.
- After measuring the opening, you can immediately get the height of the door structure, that is, the length of the required vertical handle profiles (1 or 2).
Regardless of the profile type, it is always equal to
Nd \u003d Np - 40 mm
- opening length Lp immediately gives the length of the profiles of the lower and upper guides (3 and 4).
There may be a nuance here. If it is planned to install a frame from a straight or shaped stop (profiles 9 or 10), then the length of guides 3 and 4 will decrease by 3 mm (1.5 mm on each side due to the thickness of the frame).
Ld =Lp - 3 mm
The length of profiles 9 and 10 is always equal to the "clean" opening height Np.
- The next question is the width of the door leaf.
This indicator depends on overall length of the opening and on the planned number of movable sashes, and on the vertical handle profile used, and even on the presence or absence of a schlegel.
With significant lengths of the opening, you should not chase a large width door leaves- they are too massive and not very convenient to use. It is quite possible to place two, three, four and even five wings on two-track guides. Despite the fact that even 1500 mm is allowed, they usually try to keep the width of each within 750 ÷ 900 mm.
Initial value for calculating the sash width ( Lc) - opening length Lp and the planned number of doors.
The following ratios are used for calculations:
| The presence of Schlegel | Profile C  | Profile H  |
|
|---|---|---|---|
| 2 doors | - without shlegel | Lc \u003d (Lp + 25) / 2 | Lc \u003d (Lp + 35) / 2 |
| - with schlegel | Lc \u003d (Lp + 15) / 2 | Lc \u003d (Lp + 25) / 2 | |
| 3 doors | - without shlegel | Lc \u003d (Lp + 50) / 3 | Lc \u003d (Lp + 70) / 3 |
| - with schlegel | Lc \u003d (Lp + 40) / 3 | Lc \u003d (Lp + 60) / 3 | |
| 4 doors | - without shlegel | Lc \u003d (Lp + 50) / 4 | Lc \u003d (Lp + 70) / 4 |
| - with schlegel | Lc \u003d (Lp + 30) / 4 | Lc \u003d (Lp + 50) / 4 | |
| 5 wings | - without shlegel | Lc \u003d (Lp + 100) / 5 | Lc \u003d (Lp + 140) / 5 |
| - with schlegel | Lc \u003d (Lp + 90) / 5 | Lc \u003d (Lp + 130) / 5 |
In order not to get confused in the formulas, we suggest using the built-in calculator, which will quickly calculate the required sash width
The sliding wardrobe is convenient, as the doors in the open state do not take up much space. It can generally be made unframed - in a niche, from wall to wall. All that is needed in this case is to install doors for the wardrobe, and then assemble the filling (or vice versa, this is not so important.
If we talk about strict restrictions on the size of doors for a wardrobe, then there are none. You can make any length and width. But there are recommended parameters based on operating experience:
Sash design
The door leaf of the sliding wardrobe consists of profiles:
All this together looks like in the photo. In this frame, in the grooves, your chosen material for the doors is inserted. It can be glass, mirror, and other materials.
Dividing profiles are optional. They are needed if you assemble the sashes from different materials Or maybe you just like them better this way. The maximum thickness of the filling material is 10 mm, the minimum is 4 mm. Thinner ones - glass, plastic, mirror - are inserted through the sealing gasket.
In order for the sash to move, rollers are installed on it - at the top and bottom. The entire mass of the door falls on the lower rollers, and the upper rollers stabilize the vertical position of the leaf, preventing it from deviating.
The rollers are attached to the side profiles using special fasteners.
Guides for compartment doors
As you understand, the sash is not everything. Guides are needed along which these same doors will move. There are two of them - upper and lower. By appearance they differ significantly.
When installing the doors, they are first tightly inserted into the upper guide, the sash is raised to the stop and the lower rollers are placed in the corresponding slot. The whole structure is shown in the following photo.
Size calculation
At self assembly sliding wardrobe doors have two options. The first is to measure the opening, think about how many doors you want to have and contact a door manufacturing company with this information. Just make sure they sell parts without assembly fees. The manager will take care of everything for you. necessary materials, will give out the dimensions and announce the amount. Everything is simple. But you will have to buy everything in this office, i.e. choose from what is available.
sashes
Calculate the width of the leaves so that only one handle is visible in the closed state, but at the same time it should not cover the door leaf itself. For a sliding door of two wings, consider this: measure the width of the opening, add the width of the profile and divide in half. This will be the width of the sash.
For example, the opening is 1600 mm, the width of the handle profile is 26 mm. We get 1600 mm + 23 mm / 2 = 811.5 mm. Please note that the width of the handle profile is taken arbitrarily. It can be different in shape and, of course, in width. When calculating, substitute the width of the design you have chosen.
To calculate the tricuspid, you will need to add twice the width of the profile and divide by 3.
Example: opening 2100 mm, handle width is the same - 26 mm. We consider: 2100 mm + 2 * 26 mm / 3 = 717 mm.
Everything is easier with height. 40-45 mm are subtracted from the height of the cabinet and the required sash height is obtained, as well as the length of the side profiles. With the size of the valves all.
filling
Since the filling is in a frame of profiles, we subtract twice the width of the profile from the total width of the sash. We do the same with the height - subtract the height of the lower and upper profile.
So, the width of our sash is 811.5 mm. The measured width of the handle profile is 18 mm. Since the handles are placed on both sides, we double this figure. We get 36 mm. Total filling width 811.5 mm - 36 mm = 775.5 mm.
We also consider the height: let the original be 2350 mm, the width of the upper profile is 12 mm, the lower profile is 48 mm. Total filling height 2350 mm - 12 mm - 48 mm = 2290 mm. This is if the filling is solid and it is chipboard that does not require a silicone sealant. If the sash is a solid mirror or glass, the thickness of the sealing gum must be subtracted from the found height. It is 1 mm, but since it is worn around the perimeter, it takes 2 mm in general - above and below. In this case, the filling height is 2290 mm - 2 mm = 2288 mm.
If the sash filling consists of fragments, the thickness of the connecting profile is also subtracted. It is also about 1 mm.
Profiles
The height of the vertical frame profiles is equal to the overall height of the sash. The width of all horizontal ones is calculated depending on the width of the handle: we subtract twice the width of the handle from the width of the sash (there are two of them).
Let the width of the handle be 26 mm. We get the width of the vertical profiles: 811.5 mm - 26 mm * 2 = 759.2 mm.
Assembly photo report
First, all profiles are cut exactly according to the calculated dimensions. The accuracy must be perfect. The cut is strictly perpendicular, at 90 °. Holes are drilled in the handle profiles for the installation of rollers and fasteners.
Holes are made through two diameters. The exact size depends on the dimensions of the purchased fasteners, but basically there are two sizes: 4 mm and 6 mm, as well as 6 mm and 10 mm.
At the top, one such hole is made, the center of which is at a distance of 7 mm from the edge of the profile, at the bottom of the holes there are two - the first at a distance of 7 mm from the edge, the second - departing from the cut of the profile 42 mm.
When assembling, first of all, all parts of the filling are assembled. First, if there is glass or a mirror, sealing rubber is installed around the perimeter. It is simply put on the end of the part by pressing a finger. At the edges, the sealant is cut off, put on end-to-end, but without overlap on the next side.
A protective film is glued to the rear of the mirrors. You can use regular stickers. This film will not allow the fragments to crumble if the mirror breaks.
If the sash is composite, we assemble it using connecting profiles. The filling parts are simply inserted with force into the profile. Sometimes considerable effort may be required. You can tap on the butt with the back of your hand or use a rubber mallet for this.
Simply insert the filling parts into the grooves of the profile and tap on the end
When the sash is assembled, according to the same principle, the corresponding profiles are installed at the top and bottom.
Then it's time to install the side handle profiles. Everything is the same: drive the filling into the groove, make sure that it goes all the way along the entire length without distortions. When the frame is assembled, it is necessary to tighten it with fasteners. We start from the top. Take fasteners, insert into the previously drilled hole. If the distance was measured accurately, the screw falls into the groove of the upper cross member.
Tighten the connection with a hex wrench. Slightly not screwing up to the stop, we insert the upper rollers between the screw head and the profile jumper, then we tighten the screw.
We repeat the same operation on the other side. Then we go down. Here the fastener is installed in the upper hole. We just tighten it up. Repeat the same on the other side.
Installation of the lower roller - we start the plate in profile
We press the spring, tucking the roller body inward. We insert the screw into the hole, trying to get into the socket, tighten it with a hexagon. It may need a different size - slightly smaller than the others - as this screw is usually thinner and longer.
You don't need to tighten it all the way. So that it goes into the plate half a centimeter or so. Then, when installing the door and adjusting its stroke, this screw adjusts the position of the sash - the corner rises or falls.
If you press the roller wheel, it will go into the body, then return due to the elasticity of the spring. This simple mechanism ensures the smooth running of the wardrobe door.
Having collected all the wings, we proceed to the installation of guides. They should be located strictly one under the other, even without deviations of a millimeter. Use a plumb line or laser level ().
First, screw the top guide. It is attached either to the ceiling or to the top of the cabinet. The distance from the shelves is at least 100 mm, otherwise the doors will touch the shelves, things, hangers.
We insert spring-breakers into the grooves from the sides into the lower guide. They will limit the movement of the door. The number of springs is equal to the number of wings, they are installed at both ends.
If a laser level no, in order not to suffer with plumb lines, for starters, you can simply lay the lower guide until it is fixed. Then install one blade, bringing its upper rollers to the top, and setting the lower ones in the desired groove. Thus, the doors will connect the upper and lower guides.
By setting the canvas strictly vertically, you will automatically set the lower guide. It remains only to screw it on. Just be careful not to move the doors.
The last thing that remains to be done is to glue the shlegel on the sides. This is a fleecy self-adhesive strip that softens the impact of the sash on the walls of the cabinet (or just on the walls if the cabinet is unframed).
The final touch - Schlegel sticker
On this wardrobe doors are installed and ready to go. You can watch the process again in the video.
Sliding doors help rationally use free space, do not require additional space to open. Advantages of compartment doors:
-Stylish solution for modern interiors.
- The choice of materials for filling and combinations is unlimited, helps to find the optimal solution for a room with any design.
-Sliding doors will help to forget about drafts.
- The compartment door is not able to be opened by pets.
-O sliding door it is impossible to accidentally stumble, spontaneous opening is excluded.
Sliding wardrobe doors
5 reasons to order sliding doors in "Al-mebel"
1. Production
We are manufacturers, we do not buy or resell anything, but we produce. We control the quality and timing ourselves, we store the materials in our warehouse, so we are not dependent on suppliers.
2. Price
The price of the product does not change with the arrival of the measurer and remains lower than that of competitors by 20-50 percent. We do not exhibit samples in expensive shopping centers, as we save your money, but we do not hide anything, our sliding doors can be seen at the address: Bibirevo metro station, Pleshcheeva st., 12a, Dresden trading house, 2- oh floor.
3. Timing
The term of the order - from three days, is discussed when signing the contract. Violations are subject to penalties in accordance with applicable law.
4. Quality
Confidence in the quality of our products came with European equipment. We have CNC machines, production is 80 percent automated. Come, we will show you.
5. Guarantees
Warranty for our products is 2 years. We have not changed our office address for 12 years, so it will be easy to find us. At the conclusion of the contract, in addition to the details of the company, personal
Sliding wardrobe doors
Sliding wardrobe doors consist of filling (insert) and framing along the perimeter in the form of a profile, which, among other things, serves as a handle for opening. They occupy 85 mm from the depth of the cabinet, can be more than 3 meters in height and up to 1, 2 meters in width (depending on the content). Sliding doors for a sliding wardrobe built into a niche are structurally identical to doors for a cabinet cabinet, only the types of fastening and the installation algorithm differ.
Sliding wardrobe doors are universal, suitable for a wardrobe, and for an interior partition. Sliding wardrobe doors are convenient because they do not require additional space to open (important for a small room) and are practical, their design is simple, there is simply nothing to break .
Tempered glass interior doors
glass interior doors compartments are made from tempered glass 8-12 mm thick. Outwardly light, absolutely safe, they will become a decoration of a hi-tech interior. They can be used as sliding partitions, they do not have lower guides and thresholds. glass doors compartments have high heat and noise insulation characteristics.
