Radiator meter-distributors, individual metering. Danfoss heat meter - high precision heat consumption measurement Software for radio systems

The Danfoss heat meter is a device that is designed to measure and record heat energy in apartments. This view counter can be apartment and brownie, they are often used in heating systems as they show maximum accuracy. This allows complete control over energy consumption, which ultimately saves resources well.

The danfoss heat meter includes a flow meter and a calculator. This device can be called universal, the heat meter circuits allow you to build it both into systems that are being created, and into those already in use.

Apartment counters

Danfoss residential heat meters have long been recognized a large number Russian consumers. Manufactured by a Danish company, the production takes into account real operating conditions, so the devices are as reliable and convenient as possible.

The working environment of the Danfoss heat meter is water, which in most cases can have maximum temperature up to 90 degrees. Some models contain additional functions allowing to work at temperatures up to 150 degrees.

Household heat meters

The general house meter danfoss is designed to keep track of high costs and loads of thermal energy. With its help, it is possible to determine the heat consumption in general, making payment upon consumption.

Accounting can be conducted according to an open or closed scheme. Also, with the help of this device, the thermal power, the flow rate, the amount of coolant and other parameters are monitored.

The price of a Danfoss apartment heat meter will depend on the specific model. But in order to make the right choice, it is better to consult with experts who will answer any of your questions.

In the TEPLOSTOK company you can order radiator heat meters (distributors). We are pleased to offer products of the well-known INDIV brand, as well as all necessary components for her on favorable terms.

The relevance of using the presented models

Individual heat metering allows you to save heat energy and pay for it in accordance with actual consumption. In systems with vertical wiring, radiator distribution meters are used.

The models presented in our range meet all the established requirements and have a calibration interval of 10 years.

Basic models of heat spreaders

1. Versions INDIV-3 and INDIV-3R. These valves have one built-in temperature sensor. Such devices use the principle of accumulating the resulting reading over time at a rate that is determined by the output signal of the built-in sensor.
2. INDIV-3R2 and INDIV-3RD versions. These models have 2 temperature sensors (heater surface and ambient air). In the INDIV-3R2 distributor, both sensors are built into the housing. In the NDIV-3RD device, the air temperature sensor is built-in, and the heater surface sensor is remote.

All valve types allow storing and displaying the resulting reading on a predetermined day of the year. The devices are used in internal systems heating.

Any valve can be installed on:

1. Sectional radiator in cast steel or cast iron.
2. Aluminum radiator.
3. Tubular and panel radiators.
4. Pipe registers.
5. Convectors.

The heat distributor solves the following tasks:

1. Accumulation of consumption readings.
2. Display of consumption readings for the previous year.
3. Checksum indication for verification.

In addition, the valve is equipped with a self-test system.

Specifications INDIV-3:

1. Design temperature range in heat supply systems: 55-105 degrees Celsius.
2. Starting temperature of the reference point: June-August: 40 degrees Celsius, September-May: 30 degrees Celsius.
3. Heat distributor power supply: lithium battery.
4. Dimensions: 40x76x25 mm.
5. Valve measurement accuracy: complies with European standard EN834.

Advantages of ordering heat distribution meters in our company

1. A wide range of models. You can order the distributor of the teplo both of the previous and the latest generation.
2. Optimal cost. You can order any valve model at a favorable price with a discount. We offer wholesale and regular customers participation in special promotions.
3. Help in choosing. Our experts are ready to tell you about all heat distributors and answer your questions.
4. Sufficient stock of products. You can order heat distribution meters from us in any the required amount without long waiting for deliveries from the manufacturer.
5. Prompt delivery. You can start using any distributor in the near future. The heat distribution meters are transported by the company's own transport in Moscow and in the regions.

Contact us! Control heat in a modern format and reduce costs.

Code number	Description	Price (EUR)	Sketch
088H2330	Radiator meter-distributor in compact design INDIV-5 with visual readout from LCD display	30,83
088H2203	Compact radiator meter-distributor INDIV-3R with remote wireless data transmission (radio)	43,39

Radiator meter-distributor INDIV of new generation

Code number	Description	Price (EUR)	Sketch
187F0001	The radiator meter-distributor in a compact design with an LCD display replaced the INDIV-5	43,39

Code number	Description	Price (EUR)	Sketch
088H2250	Two-channel pulse adapter INDIV PAD for connecting 2 meters (water, electricity, gas) with pulse output	74,79
088H2251	Network node, standard with independent power supply NNB-Std	306,28
088H2257	Network node with communication module for remote reading with GSM interface NNV-GSM (mains powered)	1595,22
088H2254	Network node with communication module for remote reading with RS232 interface NNV-232 (mains powered)	459,42
088H2256	Network node with communication module for remote reading with Ethernet interface NNV-IP (mains powered)	1512,26

Accessories for radio tuning and reading

Radio software

Code number	Description	Price (EUR)
	Parameterisation program for meters Indmet
	Program for reading data from Indread counters
	Indserv utility for configuring and reading data from the INDIV AMR system
	Parameterisation program for Indcomm main node including connecting cable

Kit for mounting the meter-distributor on cast-iron sectional radiators

The gap between the sections is no more than 34 mm

Code number	Description	Price (EUR)	Sketch
088H2211		1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

The gap between the sections is more than 34 mm

Code number	Description	Price (EUR)	Sketch
088H2212	Thermal adapter, standard, 55 mm	1,32
088H2230	T-nut, 65 mm	0,85
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on panel radiators

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut М 3 х 6 mm (it is required to order 2 pcs. For 1 counter)
	Welded bolt M 3 x 10 mm (you need to order 2 pcs. For 1 meter)
Kit cost

Kit for mounting the meter-distributor on convectors

Installation on "ribbing" (convectors "Universal", "Santekhprom-Auto", KV)

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2270	Threaded rod M 3 x 330 mm	2,81
	Slotted nut М 3 mm (it is required to order 2 pcs. For 1 meter)
Kit cost

Installation on a "roll" (convectors "Accord", "Comfort", "Progress")

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Tail nut М 3 x 6 mm (you need to order 2 pcs. For 1 meter)
	Welded bolt M 3 x 10 mm (you need to order 2 pcs. For 1 meter)
Kit cost

Kit for mounting the meter-distributor on tubular radiators

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
088H2241 or 088H2242	T-nut, 36mm or 45mm	6,96
	Bolt M 4 x 35 mm
Kit cost

Kit for mounting the meter-distributor on aluminum radiators

The gap between the sections is not more than 4 mm

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Self-tapping bolt C 4.2 x 25 mm (you need to order 2 pcs. For 1 meter)
Kit cost

The gap between sections is more than 4 mm

Code number	Description	Price (EUR)	Sketch
088H2211	Thermal adapter, standard, 40 mm	1,32
	Square studs (you need to order 2 pcs for 1 meter)
	Screw M 3 x 25 mm (you need to order 2 pcs. For 1 meter)
Kit cost

Optional equipment

Code number	Description	Price (EUR)

Danfoss supplies unique solutions to the Russian market, including equipment for metering heat consumption. The assortment includes a wide variety of product types:

• ultrasonic;
• mechanical;
• distribution meters

etc.
Each Danfoss heat meter is an innovative type of equipment that is designed based on modern technologies and has advanced functionality. For example, the latest SonoSelect / SonoSafe models built on ultrasound technology are highly accurate, comfortable and reliable. They take into account all the latest developments, including the ability to control using a smartphone through the SonnoApp application. Our company is ready to supply you with any model of equipment for heat metering you are interested in. You can buy from us:

• apartment heat meter Danfoss;
• general house heat meter;
• distributors;
• components for installation and operation of equipment.

Please note that we supply solutions for complex automation, including M-Bus dispatching SonoCollect 110. This popular solution allows you to organize the collection and transmission of data on heat consumption in automatic mode. Highly interesting solution!

The Danfoss T-34 heat meter, designed for general house use, is also very popular. It is effective both in closed and in open systems heating and hot water supply. The equipment is designed reliably and with high quality - practice shows that its use does not require large operating costs, and accuracy makes it possible to reliably take into account the heat consumption for any period of time. Our company has the opportunity to supply you with this equipment at a very favorable price.

In addition to general housekeeping, we also offer application models. For example, the Danfoss M Cal Compact apartment heat meter is very popular - the price, quality, reliability and availability of control software make it in demand on the market. We recommend that you pay attention to it if you are looking for equipment for use in your apartment. We also recommend paying attention to the SonoSelect / SonoSafe ultrasound model, which can be controlled remotely - via a smartphone. Very comfortable and modern model.

And a little about the advantages of our offer:

• direct deliveries from the manufacturer;
• good price without "markups";
• official guarantee and reliable service;
• assistance in setting up and installing equipment;
• free consultations when choosing models.

If you are looking for a reliable supplier, then you can always profitably buy a Danfoss heat meter from us - the manufacturer's price, a good guarantee and fast order execution will appeal to you.

Contact us!