Fire alarm installation. Automatic fire alarm installation

For timely and prompt warning of a fire, many objects in Moscow today are equipped with special fire alarms. Today, the installation of a fire alarm in Moscow is resorted to both by officials responsible for the safety of the property entrusted to them, and by property owners in Moscow who have decided to insure themselves in case of fire.

The design and installation of fire alarms in Moscow is controlled by the relevant supervisory authorities, therefore, in the production of such work, it is necessary to carefully comply with the instructions and requirements of all regulatory documents that regulate this area.

So, these documents thoroughly prescribe the number and location of sensors during the installation of a fire alarm, the list of fire extinguishing agents allowed for use, the distance from the sensors to the control panel, and much more. If any requirements and parameters are not observed during the installation of a fire alarm or fire fighting equipment, you will receive not only effective system, which will not provide you with the proper level of security, but also numerous instructions from the inspection departments.

Despite the seeming simplicity, the design and installation of a fire alarm at any facility is a technically complex and responsible task. Therefore, such a task can only be entrusted to a responsible and experienced contractor who knows all the intricacies of installing a fire alarm in Moscow.

What do you need to install fire alarm systems?

Like every other technical system, the fire alarm system consists of various elements working in a complex. One of the important links of the system are sensors - these are kind of nerve endings that react to smoke or fire, and transmit a signal to its destination.

Depending on the type of action, sensors are of different types:

• Smoke - equipped with a smoke detector, they react to smoke that has appeared in a room or on an object.
• Thermal - note the increase in temperature, characteristic of a fire.
• Flame sensors - these devices respond to various phenomena that accompany the appearance of open fire(infrared or ultraviolet radiation, electromagnetic component, etc.).

Various models of sensors can be wired and wireless, using other channels for signal transmission.

The main requirements for sensors used in the installation of fire alarms are their durability, the ability to reliably respond to fire or smoke, as well as a guarantee against accidental or false alarms. Also, sensors are often selected in accordance with the interior design, fortunately, a large number of samples available today in Moscow stores allows you to choose sensors suitable design without sacrificing functionality or quality. The choice of sensors largely determines the price and duration of work when installing a fire alarm.
Another important component of the fire alarm system is the wires through which the signal from the sensor goes to the remote control. It is clear that this is relevant for those systems where wired sensors are used. The main requirements for wires are low resistance so that the signal is transmitted as losslessly as possible, and low flammability - such a wire should not burn or melt at elevated temperatures.

How are fire alarm systems installed?

As we have already mentioned, the design and installation of a fire alarm in Moscow must be carried out in compliance with all the requirements set forth in the regulatory documents. Yes, one of important requirements installation of a fire alarm system is the location of the wires of the system at a distance from power cables and power supply wires of the facility - otherwise, such proximity may cause electromagnetic interference and interference, which is fraught with false alarms and unstable operation of the system.

Initially, a project of the entire fire protection system is prepared and agreed with the customer, which indicates the choice of equipment, the location of sensors and the path for laying wires, and the choice of a control and receiving device. A balanced and rational choice of equipment for the system will not only provide exceptionally reliable and functional fire protection, but will also provide an opportunity to save on its price.
From the equipment offered today, you can choose high-quality samples of both foreign and domestic manufacturers according to optimal price, depending on the parameters of the system and its requirements. Modern equipment is compact in size.
Another important point when choosing a contractor for the installation of fire alarm systems is that the company providing such services has the appropriate permit and authorization. Whether it is a security system in an office, an apartment or a country house - in any case, certified specialists should be involved in the installation of fire alarms.

As for the prices for the services of such specialists, it can be noted that due to the great competition in the metropolitan market for services for the installation of fire alarms, Moscow's prices in this industry practically do not differ from prices in other regions for similar services. As a rule, the price level is determined during the installation of a fire alarm by the price per point (sensor) - the more sensors, the more wires to pull, the higher the price of work may be. In addition, when installing a fire alarm, prices are formed due to other factors, such as the price of equipment, the area of ​​\u200b\u200bthe object, and so on.

Our masters are ready to offer you a full range of fire alarm installation services in the capital and Moscow region. You can also entrust all technical and legal issues related to the installation of a fire alarm to our specialists. In addition, we are ready to provide advice to the owner of the facility on how to behave in case of unreasonable complaints from fire inspectors.

If you need additional information about our work or you intend to order the installation of a fire alarm system at facilities in Moscow or the region, call us at the numbers indicated on the website.

What is a fire alarm system and how does it work?

As we have already mentioned, such a system usually includes sensors that respond to a threat, signal transmission channels (wires or others - radio channel, infrared, etc.) and a control and receiving device, where all signals from the sensors are received. When installing a fire alarm, the price of a finished system depends, among other things, on the choice of certain brands of equipment.

In addition to the fire warning system, the fire protection system may also include devices responsible for fire extinguishing.

As soon as the sensors detect smoke, temperature increase or other signs of fire, the signal from them goes to the control device, which turns on both the warning system (siren, corresponding light panels, etc.) and activates the fire extinguishing means - gas or water fire extinguishers. Also, a signal about a fire is sent to the fire service or the Ministry of Emergency Situations.
Such a system has been repeatedly tested in real conditions and has proven itself perfectly.
If you need our services, please contact us by phone or through the message form on our website. When installing a fire alarm, the price per point is calculated individually in each case. Conditions for installing a fire alarm, prices and discounts - everything can be found from specialists or found on the website in the relevant sections. We are ready to offer our customers high-quality and prompt installation of fire alarms, subsequent maintenance and repair of the system.

We specialize in equipment from both budget and more expensive manufacturers of fire alarm systems, such as: SYSTEM SENSOR, BOLID, IRSET, Siberian Arsenal, Arton, Frontier, MaviGard, Argus-Spektr etc. We have proven suppliers of both equipment and Supplies and we always find individual approach to every client. In all cases, the cost of our work is calculated individually and depends on a number of factors, such as the specifics of the object itself and the type of system chosen. It is also worth remembering that we have a system of bonuses and discounts, which applies to both new and regular customers. We guarantee the quality of our work by providing a long-term GUARANTEES. The approximate cost of providing our services for the installation of fire alarm systems can be found in the table below.

If you have any questions, be sure to contact our specialists who will be able to advise you, help you choose best solution your task and will significantly save your time and money.

For a general understanding of the price of installing a fire alarm system, consider some of the most popular typical solutions:

Consider the cost of installing a fire alarm system in a four-story building. office building, with a total area of ​​about 1000 m 2 . According to the requirements of the customer, the system must comply with all state regulations fire safety and have all permits for its operation.

Considering the specifics of this object and relying on the requirements of the existing fire regulations(SP 5.13130.2009), it was decided to use a fire alarm system (SPS) manufactured by BOLID, which meets the requirements of fire protection, has the appropriate certificates for its safe operation and will allow you to control each room of the facility. Thus, the composition of the SPS of this object includes:

• optical smoke detector IP-212-26U- 133 pcs;
• thermal fire detector IP-104-1- 23 pcs;
• manual fire detector - 10 pcs

Equipment layout plan on the fourth floor

• internal cable laying in a corrugated pipe (1700 m): 1700 * (30+20) = 85000 r.
• installation of a control panel (1 pc.): 1*4000 = 4000 r.
• installation of firefighters smoke detectors(133pcs): 133*451= 59983 r.
• installation of fire heat detectors (23 pcs.): 23*451 = 10373 r.
• installation of firefighters manual call points(10pcs): 10*451= 4510 r.
• system setup: 15000 R.

Total: the total cost of installing a turnkey fire alarm system in a four-story office building with an area of ​​about 1000 m 2 will be about $93866

Consider the cost of installing a fire alarm system in a small grocery store with a total area of ​​about 105 m 2 . According to the requirements of the customer, the system must comply with all state fire safety standards and have all permits for its operation.

Considering the specifics of this facility and based on the requirements of the current fire safety standards (SP 5.13130.2009), it was decided to use a non-address fire alarm system (SPS) manufactured by the Siberian Arsenal company, which meets the requirements of fire protection, has the appropriate certificates for its safe operation and will allow you to control each room of the object. Thus, the composition of the SPS of this object includes:

• control panel - 1 piece;
• display and control unit BIU- 1 PC;
• optical smoke detector - 8 pcs;
• manual fire detector - 1 pc.

With this placement of equipment, the cost of installation and adjustment of the system will be:

• internal cable laying in a corrugated pipe (120 m): 120 * (30+20) = 6000 r.
• installation of the control panel (1 pc.): 1*1280 = 1280 r.
• installation of the indication and control unit (1 pc.): 1*845 = 845 r.
• installation of fire smoke detectors (8 pcs.): 8*451 = 3608 r.
• installation of fire manual call points (10 pcs.): 1*451 = 451 r.
• system setup: 2000 r.

Total: the total cost of installing a turnkey fire alarm system in a grocery store with an area of ​​​​about 105 m 2 will be about 14184 r. without taking into account the cost of the equipment used.

Consider the cost of installing a fire alarm system in a three-story secondary school with a total area of ​​about 2000 m 2 . According to the requirements of the customer, the system must comply with all state fire safety standards and have all permits for its operation.

• control and management panel - 1 pc;
• two-wire line controller - 3 pcs;
• branching-insulating block - 10 pcs
• signal-starting block - 1 piece;
• relay module - 1 pc;
• address expander - 1 pc;
• uninterrupted power supply unit RIP-12 (Spanish 01)- 1 PC;
• fire smoke detector - 181 pcs;
• thermal fire detector - 10 pcs;
• manual fire detector - 17 pcs;
• linear smoke detector - 5 pcs.

Basement floor plan

Equipment layout plan on the ground floor

Equipment layout plan on the second floor

Equipment layout plan on the third floor

With this placement of equipment, the cost of installation and adjustment of the system will be:

• internal cable laying in a corrugated pipe (2200 m): 2200 * (30+20) = 110000 r.
• 845 r.
• installation of a two-wire line controller (3 pcs.): 3*845 = 2535 r.
• installation of a branching-insulating block (10 pcs.): 10 * 845 = 8450 r.
• installation of a signal-starting block (1 pc.): 1*845 = 845 r.
• relay module mounting (1 pc.): 1*845 = 845 r.
• installation of address expander (1 pc.): 1*845 = 845 r.
• installation of an uninterruptible power supply (1 pc.): 1 * 900 = 900 r.
• installation of fire smoke detectors (181 pcs.): 181*451 = 81631 r.
• installation of fire heat detectors (10 pcs.): 10*451 = 4510 r.
• installation of fire manual call points (17 pcs.): 17*451 = 7667 r.
• installation of fire smoke linear detectors(5pcs): 5*1650= 8250 r.
• system setup: 45000 r.

Total: the total cost of installing a turnkey fire alarm system in a three-story comprehensive school with an area of ​​​​about 2000 m 2 will be about 272323 r. without taking into account the cost of the equipment used.

Warehouse fire alarm

Consider the cost of installing a fire alarm system in a large warehouse complex with a total area of ​​about 15,000 m 2 . According to the requirements of the customer, the system must comply with all state fire safety standards and have all permits for its operation.

Considering the specifics of this facility and based on the requirements of the current fire regulations (SP 5.13130.2009), it was decided to use the addressable fire alarm system (SPS) manufactured by Z-LINE, which meets the requirements of fire protection, has the appropriate certificates for its safe operation and will allow you to control each room of the facility. Since this object has quite large area, then for its protection it will be fully used modern smoke aspiration detectors manufactured by the Spetsavtomatika company. This solution will save on cable products and the total cost of installation work. Thus, the composition of the SPS of this object includes:

• control panel Z-101 - 1 PC;
• addressable input/output module Z-021 - 34 pcs;
• relay module Z-022 - 34 pcs;
• aspiration fire detector IPA- 34 pcs;
• uninterruptible power supply - 10 pcs;
• smooth rigid pipe for an aspiration detector - 784 m.

Piping plan aspiration detectors in the main storage space

Equipment layout plan in the main storage space

With this placement of equipment, the cost of installation and adjustment of the system will be:

• internal cable laying in a corrugated pipe (1100 m): 1100 * (30+20) = 55000 r.
• installation of a control panel (1 pc.): 1*2500 = 2500 r.
• mounting of I/O modules (34 pcs.): 34*845 = 28730 r.
• mounting relay modules(34pcs): 34*845= 28730 r.
• installation of fire aspiration detectors (34 pcs.): 34*1000 = 34000 r.
• installation of an uninterruptible power supply (1 pc.): 10 * 900 = 9000 r.
• installation of a pipe for aspiration detectors (784 m.): 784 * 30 = 23520 r.
• system setup: 36000 r.

Total: the total cost of installing a turnkey fire alarm system in a warehouse complex with an area of ​​​​about 15,000 m 2 will be about 217480 r. without taking into account the cost of the equipment used.

Consider the cost of installing a fire alarm system in a multi-storey residential building (16 floors and underground parking). According to the requirements of the customer, the system must comply with all state fire safety standards and have all permits for its operation.

Considering the specifics of this facility and based on the requirements of the current fire safety standards (SP 5.13130.2009), it was decided to use the addressable fire alarm system (SPS) manufactured by BOLID, which meets the requirements of fire protection, has the appropriate certificates for its safe operation and will allow control every room of the facility. Thus, the composition of the SPS of this object includes:

Parking lot equipment plan

Equipment layout plan on the ground floor ( office rooms)

Equipment placement plan for typical floor(floor 2-15)

Equipment layout plan on the top floor (floor 16)

With this placement of equipment, the cost of installation and adjustment of the system will be:

• internal cable laying in a corrugated pipe (1200 m): 1200 * (30+20) = 60000 r.
• installation of the monitoring and control panel (1 pc.): 1*1280 = 1280 r.
• installation of two-wire communication line controllers (6 pcs.): 6*845 = 5070 r.
• installation of indication blocks (6 pcs.): 6*845 = 5070 r.
• mounting backup source supply(1pc): 10*900= 9000 r.
• installation of optoelectronic fire smoke detectors (234 pcs.): 234*451 = 105534 r.
• installation of hand-held addressable electrocontact fire detectors (34 pcs.): 34*451 = 15334 r.
• installation of thermal addressable analog fire detectors (141 pcs.): 141*451 = 63591 r.
• system setup: 50000 r.

Total: the total cost of installing a turnkey fire alarm system in a multi-storey residential building will be about 314879 r. without taking into account the cost of the equipment used.

Installation of a fire alarm system is a mandatory stage in the preparation of an object before commissioning.

Increased requirements are imposed on the protection of premises from various emergencies, therefore, without technical means fire safety is indispensable.

How to put?

Currently, the service - installation of a fire alarm - is offered by many companies both in Moscow and in other cities. Offers vary in price, terms, types of equipment used. In addition, on the OPS market, you can find technical means that do not require special knowledge, which the owners of the facility can install on their own. But before making a choice in favor of a particular company, as well as self-assembly, it is necessary to take into account a number of nuances:

• Installation of fire protection systems is a licensed activity - the installation organization must have an appropriate permit, and self-installation possible only on objects of individual use;
• The presence of strict regulatory regulation - each category of premises, buildings, structures has its own requirements for the level of technical support for fire protection;
• The specifics of the object, both constructive and operational, affect the choice of equipment and the order of its placement.

Calculator for calculating the cost of installation by area

Installing a fire alarm system is a task for specialists who will calculate all the risks and carry out work in strict accordance with regulatory requirements. Here it should be remembered that the designers and installers of fire alarm systems are responsible for the quality of the work performed. And this is a very weighty argument to entrust the installation security and fire alarm prepared people. At the same time, you should not abandon the installation just for the reason that it is necessary to involve specialists in the work. For small objects, for example, an apartment, a garage box, installation can be performed on your own via ready-made kits equipment. But even in this case, it is worth inviting a specialist who will select the equipment that is suitable for this particular room. And only on the basis of his recommendations it makes sense to acquire technical means and install them.

On what objects to put?

Each owner of a premises of any purpose is responsible for ensuring fire safety requirements in it. The volume of requirements depends on the type of object, the order of its use, location and a number of other factors. For a significant number of premises, primarily for public purposes, it is mandatory to install fire warning equipment. It can be both local in nature for informing about a fire, or included in the complex for transmitting an alarm signal to the fire department.

In relation to objects that are not included in the list, where the installation of a security and fire alarm system is mandatory, the decision on the appropriate technical equipment is made by the owner independently. Often they do not consider it necessary to install even the simplest stand-alone detectors. But arbitrage practice in cases of fires, it is not in favor of such owners, because they are responsible for ensuring fire safety, the courts come to the conclusion that the absence of an OPS is a fact of insufficient fulfillment of this obligation, therefore, the fault of the owner of the premises in non-compliance with fire safety requirements is obvious. Such circumstances make the installation of a fire alarm system a mandatory procedure that can really protect against many negative consequences.

Work order

Installing a fire alarm system involves several steps:

• Inspection of the object;
• Development of a project with the definition of a list of equipment;
• Preparation of the object for installation;
• Installation work;
• Commissioning works.

Only this A complex approach for installation will form an effective fire alarm system. It should be noted that at present such systems are of a complex nature and are designed to alert not only people in the building, but also emergency services about a fire.

Do not forget that the structure of the OPS also includes technical means for ensuring evacuation. Previously, they were only special signs of evacuation routes. At the present stage of development of technical means of protection and safety, fire safety components are integrated with other complexes, for example, access control and management, thereby forming a single system of protection against emergencies. Such a system provides for constant technical control over the state of all objects, timely transmission of a signal about an emergency situation, remote dispatching of various engineering communications. According to experts, a standard fire alarm on analog equipment can reduce the time of fire detection by three times, and in combination with equipment automatic fire extinguishing can ensure the localization of the fire before the arrival of the first fire brigades.

Practice shows that correct installation security and fire alarm system, a specialized organization, ensures long-term trouble-free operation of the equipment. And the installation of all devices does not end the work at the facility for the installers. any technique needs periodic maintenance. The complexity and scale of its implementation depend on the technologies used, as well as the characteristics of the facility. By the way, even the most primitive equipment installed on its own needs regular maintenance. It is desirable that such work be carried out by specialists who will not only ensure the operability of technical security equipment, but in the process of maintenance will eliminate the shortcomings of self-assembly.

Equipping buildings with a fire alarm system is an urgent need on which the lives and health of many people depend, which is much more expensive than any installation costs.

Work on the installation of a security fire alarm (OPS) is necessarily preceded by several organizational stages. This:

• inspection of the object;
• drafting terms of reference(TOR) for design;
• development of project documentation.

The purpose of the survey is to determine design features buildings (premises) to determine the type, installation locations of SENSORS and alarm devices.

Since the requirements for the installation of security (OS) and fire (PS) alarm systems do not match, the accents during the examination for each of the systems are different. For example, the height of the ceilings is critical for the placement of fire fighting equipment, while the material and thickness of the walls are taken into account when installing a burglar alarm.

The survey requires special knowledge, skills, one article and a few days to learn this process is not enough. Nevertheless, in the section on the installation of security systems, the main issues of choice and placement of equipment will be considered.

• Houses;
• in the country;
• in the apartment;
• garage.

Sensors and devices for all variants, in principle, are the same. The difference is in the completeness of the blocking, which means in the reliability of protection and the timeliness of intrusion detection.

A specific example: a single motion sensor installed in a room will detect the presence of an intruder in it. But this will happen after he breaks the window or breaks the door. That is, between the beginning of criminal acts and their detection, some time will pass. For prompt response to an alarm, this is unacceptable.

By supplementing our system with detectors that react to breaking a window, breaking or opening a door, we get a few minutes that can prevent theft. If we are planning to install a simple sound alarm, then it is better to scare off the intruder before he enters the house.

In addition, if it is visible from the outside that the object is equipped security system(for example, sensors are installed on the windows), this can be an effective deterrent.

* * *

© 2014-2019 All rights reserved.
The site materials are for informational purposes only and cannot be used as guidelines and normative documents.

If you are trying to protect yourself and your property from possible fires and fires, then installing a fire alarm system (OPS) is exactly the solution that will provide effective solution this task. Modern systems fire extinguishing systems include many innovative developments and solutions that will allow you to identify the source of fire in time, report an incipient fire to the fire department, and also independently do everything possible to eliminate the fire and minimize its impact on the property in the room.

4 reasons to buy OPS

The principle of operation of the fire alarm system provides for the possibility of early detection of a fire by characteristics: an increase in the temperature in the room, smoke, the presence of an open flame. Installing a security fire alarm system will ensure in the event of a fire:

1. notification and management of personnel evacuation;
2. shutdown of a running technological equipment;
3. turning off air conditioning systems and supply ventilation;
4. launch of fire extinguishing systems, smoke absorption and other fire fighting systems.

Features of the installation of fire systems

Installation of fire alarm systems involves a whole range of works, including:

• selection of appropriate equipment for the project;
• installation of the necessary sensors;
• equipment setup and commissioning.

Installation of fire extinguishing and fire alarm systems can be carried out in any premises, except for landings and premises with high humidity and moisture condensation (bathrooms, showers, toilets, etc.). A fire alarm can be installed both on and in the office, and in a residential building, or on.

Fire alarm installation. Lowest prices, highest quality

Our company has many years of experience in the installation of various fire systems. We offer a wide range fire and security systems, which are able to reliably protect your property from fire. Professional Installation fire alarm in Moscow by our qualified team is carried out quickly, efficiently and in accordance with established technical standards.

The cost of installing a fire alarm will depend on the type of system being installed. Traditional threshold fire alarm systems, which are installed mainly in offices or enterprises, have a lower price. And here automatic system address-analogue type will cost much more, but the efficiency of their work is an order of magnitude higher. The prices for the services offered can be found in detail in our price list.

If you need to install a security fire alarm, the price of which is the lowest in the region, and the quality of work meets highest level- contact Pozhtekhmontazh LLC, we will definitely help.

Installation installation of security fire alarms is one of the main stages of installation of fire protection systems in the premises. This stage involves the installation of the necessary sensors and related devices that will quickly and effectively identify the source of fire, notify about it and try to localize the fire, preventing ignition in other places and its spread over large areas.

The installation of fire alarms has several purposes - warning people of an impending danger, transmitting a signal for help to the relevant special services, and taking actions to eliminate the source of fire at the earliest stage.

The main nuances of the installation of fire systems

After creating a project for the future alarm system and agreeing it with the customer, fire alarm installers proceed directly to the work related to the installation of the appropriate equipment. On the initial stage laying in progress network cables, with the help of which power is supplied to alarm devices, signals are exchanged between sensors and controllers that read signals, as well as a central control computer.

At the next stage, the installation of fire alarm systems involves the installation of appropriate sensors (temperature, smoke, open flame) and detectors associated with them. Next, the installation of primary fire extinguishing and smoke removal equipment is carried out.

At the final stage, the installation of a fire alarm includes work on setting up the equipment, performing commissioning and testing the system.

fire alarm installation cost

The Pozhtekhmontazh company is ready to offer its customers the installation of fire alarms in Moscow on mutually beneficial terms. A qualified team can perform installation work any degree of complexity. All work is carried out in strict accordance with established technical standards and GOSTs.

We install fire alarm systems in any room, whether it is an industrial facility or a residential building, educational institution or storage room. To create fire alarms, only modern high-quality equipment is used to reliably protect the customer's property from a possible fire. At the choice of the client, we offer him the installation of a fire alarm, the cost of which may vary depending on the selected equipment option. Threshold signaling will cost less, and analog addressable systems will have a slightly higher cost. All prices for the installation of a fire alarm system by our specialists can be found in the price list of Pozhtekhmontazh LLC.

Pozhtekhmontazh LLC is ready to install fire and security alarms in a short time, the price of which will be minimal in the region. We guarantee the high quality of all work!

For clarification of questions regarding the installation of a fire extinguishing system at your facility, contact the manager.

An example of the cost of installing a fire alarm (non-addressed) for a room with an area of ​​​​not more than 50 m2

		2 pcs
	Manual fire detector	1 PC
	Light annunciator	1 PC
	Sound annunciator	1 PC
	Control panel device	1 PC
	Battery	1 PC
	Fire resistant cable	35 m
	Fireproof power cable	5 m
	Corrugated pipe	28 m
	Single channel box	6 m
Total cost with installation 19800 rubles (excluding VAT)

An example of the cost of installing a fire alarm (non-address) for an object with an area of ​​100 m2

	Fire smoke detector	10 pieces
	Manual fire detector	1 PC
	Light annunciator	1 PC
	Sound annunciator	1 PC
	Control panel device	1 PC
	Battery	1 PC
	Fire resistant cable	115 m
	Fireproof power cable	10 m
	Corrugated pipe	92 m
	Single channel box	14 m
Total cost with installation 33800 rubles (without VAT)