Installation of shelves on the wall. Corner shelves on the wall with their own trees and glass (photo)

With all the manifold existing ways Interior decoration I. modern design, almost impossible to imagine modern roomIn which the shelves would not be used.

Decorative and easy to store different trifles, massive for books - shelves are capable not only to be an additional useful surface, but they can also act as decorative decoration Any room or office.

There are two main ways to fasten the shelves:

• traditional mounting shelves to the wall
• invisible or secret mounting shelves to the wall

The traditional method of fastening with various types of brackets, metal or wooden racks is popular only when competently selected in color, texture and material fasteners also make their "highlight" in artistic image premises.

But often, the presence of additional decorative and technological elements is not always consistent with the general intention of the designer and the target direction of structures. In this case, it will be better to take advantage of the second way of fastening.

The development of the modern design craft and the construction industry allows not only to quickly cope with the task of hanging the shelves, but also successfully use the fastening of the shelves to the wall without apparently fastener, thereby creating the illusion of the ward in space.

Invisible mounting shelves to the wall

Consider the main stages right fastening Shelves to the wall, hiding all the fastening elements:

1. To begin with, you need to appreciate the strength of the wall or partition on which the shelf will be attached.

With thickness brick partition From 250 mm and concrete partitions with a thickness of 100 mm can be used without concerning the shelves without additional bearing structures.

The scheme of the invisible fastening of the shelf.

1 - bracket for fastener shelf; 2 - mounting holes; 3 - steel axis; 4 - suspension; 5 - shelf.

With a smaller brick thickness, slag cloth and drywall walls up to 100 mm, it is possible to use an invisible mounting of the shelves to the wall, but such shelves are suitable only for decorative purposes.

Since they simply cannot withstand additional loads.

Then it is necessary to determine the thickness of the shelf itself.

It can be determined by locating on it of the alleged weight. The absence of visual deflection and deflection to the touch indicates a sufficient bottle thickness.

Exception may be cases when the choice of a thicker board is dictated by the overall interior concept.

However, it is also necessary to take into account the features of fasteners, due to which the thickness of the board, as a rule, can not be less than 30 mm. The thickness of the shelf must be chosen depending on the load, for example, for books - boards with a thickness of 45 to 60 mm are suitable.

The board must be dry and processed according to its destination.

Types of mounting shelves to the wall

After that, the types of fastening of shelves to the wall are selected, depending on its purpose and thickness of the board.

Exists great amount Fasteners who can be hidden from prying eyes, consider some of them:

• The most popular on this moment, is an using hidden hingeslocated on the back of the shelf.

Fastening technology using loops:

For neat hanging, you need to accurately measure the distance between the centers of the loop.
This distance will determine the markup on the wall under the holes for fasteners. To hang the shelf exactly and do not twist, it is better to use a building level that will provide an accurate horizontal shelf line.
After the holes in the wall are drilled in accordance with the markup, they are filled with a plug, into which screws are screwed.
Screw must be screwed enough deeply, but the distance between his hat and the wall should allow to wear hinged loops Shelves.

A special fastener is supplied with the shelves, designed for the invisible installation. The regiment installed in this way will be securely fixed. At the same time, a visual impression will be created, which is literally hanging in the air.

Method for installing shelves with special furniture fittings

Consider step-by-step execution This montage.

It begins with the acquisition of a modern shelf in a furniture supermarket or online store.

Step 1. Measure the distance between the centers of the mounting holes, directly on the product.

Step 2. After that, place the location of the shelf on the wall. With the help of the construction level, we carry out a horizontal axis, which we note the position of the mounting holes, taking into account the intercentrous distance between them.

Step 4. The next operation will be the drilling of the hole for fastening brackets. They must be accomplished strictly perpendicular to the wall, it will provide an angle of the regiment of 90 degrees relative to the wall. To simplify drilling, it is advisable to apply the square.

Step 6. After that, kpripim brackets to the wall with the help of screws.

Step 7. Now we carry out the immediate installation of the shelf. To do this, we put it on the steel axes of brackets, alternately approach the rubber hammer on the left and right side in the facade part. The shelf will evenly be found on the fasteners elements, excluding the battery.

Step 8. The final step will be checking the backup and reliability of the attachment. After that, we remove the rest of the garbage and install the vase with orchid. Installation process is completed.

Another way of invisible mounting (metal rods)

Technology Installation Mounting Metal Rods:

As a rule, reinforcement pins or threaded studs with a diameter of at least 10-12 mm are used.

First of all, we take our shelf and measure its length and width.

Then, using a ruler and construction level, we note this length on the wall (you can not all distance, but slightly shorter), on the site of the future position of the shelf.

We note on each side of the shelf three thickness of the boards and drill the holes equal to the diameter of the pins, make such holes in the shelf itself (you can use the template, since you should exactly match the holes in the wall and in the shelf).

Then judge from the subsequent filling of the shelf, if there will be lightweight souvenirs there - it will be enough of these two pins, if heavier things are standing - you can make more fixtures (even every 5 cm)

.
We take the right number of long rods (their length should be about 1/3 from the width of the shelves, but note that the wall should be at least 10-15 cm pine).

Insert the rods into the wall on half of their length, check the level to be accurately perpendicular to the wall, the durability of the entire design and the safety of items on it are depends on it. Then secure the rods with synthetic glue or resin, wait for the glue drying.

After that, sit on the rods of the shelf (you can additionally glue the pins to the shelf, pouring into the holes).
One of the mounting options can be considered preliminary installation In the wall of the square of the square section (usually used for non-shelves of the shelves).
Fastening installation technology:
To do this, the wall is mounted in the wall, the side of which is equal to the thickness of the board for the future shelf.

It is attached with the help of dowels, nails or plastic anchors with self-draws. Then, the round wooden pins (brazen) are robbed by the holes, which are lubricated with glue, after which they put on a wide part of the shelves.

In order to put the board on the pins or brazen, the mold is used with a rubber bolt, which is neatly hit on the outer edge of the board.

Variating the height, texture, color and thickness of the shelves, you can achieve an original and unique design and create a feeling of ordering and the completion of the design of the room.
Without limiting fantasy and using all the advantages of modern construction market, I should remember the safety, carefully produce and check all the fasteners.
In this case, the shelves, like any other element of the functional decor of the room, will serve for a long time, remaining a reliable, useful and beautiful element of the interior.

And you can watch the video hanging the shelf on the wall

One of the placements to decorate the room is the use of shelves. But they are not only an item for decoration. Much more often they are functional. Hang shelves on the wall, put on the floor, some suspended to the ceiling or beams. But what is best - they are easy to do themselves, with your own hands.

Types of shelves in the house

At the place of installation, shelves are wall, outdoor and suspended. If the floor shelf has a greater height - from the meter and above it is often called the rack. A few words about suspended: Usually these are decorative designs that hang on a pipe or specially driven bracket. This option is popular in those rooms where heating pipes are under the ceiling: they are asking for something to hang out something. On the pipe hang shelves in the kitchen and in the bathroom: it is convenient there.

They are made of wood, Fiberboard, there are glass shelves. As racks, the same materials are used, but they are made of metal, plastics and other completely incredible things - for example, pipes or bottles.

IN residential rooms It is not so important from what material the shelf is made. It is important that its design was in the same style with the interior. Even the functionality is not always important: some play an exclusively decorative role. On them if there is something one or two subjects. Their role is to give the interior of the housing of a special style and color.

Laconic style of apartment decoration and the same concise shelves of contrasting color. In this interior, they are the main element. Free space above the sofa is organically filled with shelves in the tone of the walls.

If we talk about the shelves in technical buildings - the kitchen and bathroom, in particular, then the requirements for practicality are also added to the considerations of aesthetics. Even decorative shelves in the kitchen should wash well. For shelves in the bathroom, the requirements are high: periodically there is very high humidity And the materials are required that it is transferred without any harm. They are not so much. This plastic I. stainless steel. There are still shelves for the bathroom from MDF, but they are normally operated with good.

Shelves on the wall

In any room on the wall there are places that simply need to hang something. After all, the majority modern furniture It takes only the bottom - sofas, tables, couches. Top part It remains empty and dissonant arises: the overloaded bottom of the room and the semi-empty or completely empty top. Here these voids on the walls are organically filled with shelves.

Whole system, and the most "dead" space is used - angle

Structurally, most shelves consist of itself shelves and jumpers. But these components are combined into such a number of options that it is impossible to calculate. Simple design It is good: you can make any shelves with your own hands. Moreover, these products may be the first to be manufactured things. It is really simple.

How and on what to fix

We are not in vain from fasteners. The design of the shelf on the wall depends largely on the type of fastening. Or maybe on the contrary. It depends on what to dance ...

Traditional loops

there is traditional way - on the loop. It is suitable for wood and fiberboard, any other materials that have enough thickness to attach them. Screen soldered on the side parts. Then, between the centers of the hinge holes, the distance is measured, postponed on the wall (follow the horizontal). In the points noted, the holes under the dowel are drilled, a dowel is inserted and a dowel-nail with a small hat screws into it, which enters the loop or bracket (pin, slightly bent up). Then the shelf is hung on them.

Not all materials can be drilled. For example, glass shelves. They will not screw anything exactly. Mounts for glass shelves Special: They consist of two parts, between which the glass is inserted. Often there are elastic gaskets between the holders. In the lower fastener, there is usually a small clamping screw for fixing.

Fasteners for glass shelves

The most popular fastening for glass shelves is called Pelican - for a peculiar form. He himself looks good, there is in different colors. The thickness of the glass that it can hold is from 8 to 34 mm. You can insert not only glass into it, but any other material of such thickness. Just with glass it looks stylish.

Make glass shelves on the wall with it easily: buy mount, in the glass workshop, order the desired size and shape of a piece of glass with processed edges (or cut, if you know). The assembly itself remains:

1. Attach "Pelicans" to the wall. Two dowels. Housing collapsible - decorative cover Removed, and in the mounting plate there are two holes. One in the housing is higher, the second is below. Passed, installed a decorative lining.
2. Inserted glass.
3. Swallowed screw. Everything.

There are other shapes like fasteners. The photo below is some of them.

Decorative brackets

Another type of fastening is brackets. They are reliable, some decorative, and so much that they themselves are decoration.

Secret installation - shelves without support

And the most amazing fixture for secret installation. It makes it possible to hide fasteners. In the end carved planting place Under the pin and the housing of the holder and the shelf just put on it.

As you can see, even simple blackboard Or a piece of glass on such fasteners is not bad. But there is another sea of \u200b\u200bany ideas.

Bookshelves

Requirements for strength are presented to the bookpins: weight is kept significant. Therefore, the fastening and materials and design must be reliable. Traditionally, shelves for books are made of wood, laminated or veneered DVP. And then the Fiberboard with a long span (more than 90 cm) begins over the years.

Planning the shelves on the walls for books on its own sizes, keep in mind that the distance between the supports on should be more than 90 cm. Then even fully loaded it will not bend. And the species and varieties of the shelves are two: wall and outdoor. And those and others may be angular.

In very simple case This is a board fixed in one way. Some options, especially with proper feed, look very well.

And in the presence of fantasy, a few pavements turn into a very interesting thing that can even be the main element of the decor. Ideas for independent manufacture Collected in the photo gallery.

And this is a serious way to expand the space due to the corners between the two windows nonlinearity - they are always interesting, and the books of different height can be put on such a shelf

Outdoor bookshelves can be loaded more seriously. There are other forms: there are racks to which shelves are attached. The highlight can be a broken or unusual shelf line as well as interesting racks.

It is rather a book rack or even a wardrobe, but the point does not change - original color and interesting small shelves in the central part and the structure looks interesting
Very interesting idea - nonlinear shelves and jumpers from thick glass

About the manufacture of fountains (and small indoor, and more solid for cottage, subsidence or garden plot) Read.

Suspended

Not very numerous, but the original type. The most important thing is that you can do easily: a few dashes, four ropes or two belt and you can start working.

This is a difficult system of blocks ... and the shelves can be at any level two planks, four ropes and half an hour of time - everything is needed in order to make this shelf how to make a suspension shelf - graphic step-by-step instruction

In nursery

While the child is completely small, I want a functional shelves, but with children's drawings. But where are these? Make yourself. Any shelf of the configuration you like can be saved with wallpaper on a fliesline basis or dense wrapping paper (glued on the PVA). After drying, twice covered with varnish on water based. Such shelves can be washed, but what is the most interesting, the shelf can change together with the child. Ring old decor, glue new. The idea is simple, it works on "excellent."

For children, shelves are not very different in design. If we talk about outdoor or about racks, then they should be strong: given the fact that grown children will definitely want to climb them. Therefore, often even those shelves that stand on the floor are fixed in addition to the wall: so that they do not collapse and do not give young climbers. Based on these considerations, they are not made high: even if they fall - not scary.

The shelves in the children's room in color are more bright, they can be made in the form of letters, there may be boxes for toys in them: so it is easier to keep them in order. In general, the functionality and security should be combined.

The system with drawers - cleaning will be a quick combination of open and closed shelves - convenient for preschool children

Shelves and shelves in the kitchen

Nor say, but in the kitchen, the main thing is functionality. Not so much free space even on the walls: the lockers occupy a large territory. Because one of the tasks - to use the maximum free space. Interesting ideas are for small or even very small gaps between the wall and refrigerator or another household appliances. Strictly in size can be made on the wheels, which goes away and hides completely there. It is wide and narrow (see photo).

Such a retractable shelving shelf on wheels under different jars make it easy. All right at hand and does not interfere

Is there some more interesting ideas As for saving space. If the washing or a hundred is standing near the window, you can take the sidewalls. There is an interesting suspended option - Grille on chains, to which all utensils are cling. But such a regiment is possible if the desktop is not at the wall. Another option to save space - if the kitchen-dining room is zoned by the counter, you can also make a regiment, which will be partially suspended. One part of it rests on the wall, the second - on the counter or "hanging" on the ceiling.

Cave the whole wall above the work desk by lockers - not the best way out. They look too heavy. You can solve the problem at the expense of the glass door, but it is not all like it. Exit - to make open shelves between the cabinets. They will give more ease of the interior and work zone It will not be possible to put it on all the rest of the space.

Square and open shelves "make it easy" interior style is another - the idea of \u200b\u200bthe same closed and open shelves in one system - convenient and non-standard

Decorative and original

Often the shelves on the wall play an exceptionally decorative role. They are called to attract attention and this goal is achieved unusual form, contrasting with respect to walls, color. You will not put a lot to her: one or two things, but how interesting they are.

Another option "square" shelves. Two identical sets connoined differently if traditional square shelves arrange on the edge of the curly frames, the style is completely different

One more interesting topic - Glass shelves. Just one glass is not very interesting. Its combination with wood and steel is more attractive. The effects are sometimes unexpected. Glass is collected on the guides: the material is fragile and heavy, and it needs to be kept. It was under the power of steel.

In fact, these systems are designed to create interiors of stores, but also in the apartment in modern style Or look stylish.

To the style "Vintage" are also suitable

What only do the shelves do. Even of the pipes. Metal and plastic. Remaining samples from repair? Use it in business, and get the designer thing, which is interesting, collected from the rubble.

Such is the interesting variation of the bookshelf from pipes

How often in everyday life It is necessary to think about choosing a mount for the shelves on the wall. There is a huge number of species wall-mounted shelves. Production uses a wide variety of durable materials.

The main ones are: natural tree, LDSP and MDF from plastic, metal or glass are also gaining popularity among consumers.

These composite, curly or multi-tiered structures are firmly entered into our situation.

Therefore, everyone often arises the question of how to hang the shelf on the wall using available methods Fastening.

Types of mounting for wall shelves:

• Hidden (using hidden fasteners);
• Brackets;
• Corners and loops;
• Holders for glass models.

All these ways to attach the shelf on the wall it is possible to use independently without the help of professionals.

The most convenient to hang the design to the hidden fasteners.

Apply brackets and corners can also be able to anyone "with hands". But, before hanging the shelf on the wall of glass, it is necessary to carefully check everything and preferably consult with knowledgeable people.

Fastening with hidden fasteners

Attaching of this kind allows the owner to hide all the fastening components when creating aesthetic, tidy, weightless composition in any apartment for any interior.

For installation you can use:

• barboard attached to the wall;
• iron rods;
• hidden loops.

Wooden and plywood can be placed on the wall using a bar, in advance attached by a dowel.

So that the bar did not stand out, it should be installed in size, and also correspond to color.

The inner hollow shelf having the shape of the box is put on top of a bar and fixed with self-tapping screws. The reinforcement pins for installing the design are selected by the magnitude of the shelf itself. The required length should be at least 30 percent.

In order to clearly enter the holes in the wall to the shelf, the template is used. For creating sturdy construction on the for a long time It should be resorted to the help of superciles.

If the shelf is enough large sizesYou can use hidden hidden loops to secure. Required conditionSo that the loops were small, did not significantly performed. Before work, it is necessary to clearly place the distances between the central parts of the loops.

According to the markup, the holes are already drilled, the plug insert into them, and after the screws are tightened, which are attached, already directly, to the hinges on the shelf.

Installing shelves on the brackets

This method can be used if there is no need to hide fasteners. To save, you can pick up plastic or iron corners, although decorative fasteners are more common.

You always need to acquire at least a couple of brackets. Their quantity depends on the thickness of the shelf.

The bracket comes complete with all the necessary fittings. This kind of fasteners will not fit into any interior. Best of all, they will look in standard interior solutions without delights.

This is determined by unusual carved patterns that are equipped with a bracket.

There are also the most innovative modifications, called pelicans and strengthening in the form of accurate geometric configurations.

They are perfectly suitable for minimalism and modern interior.

Option color Gamma. For them, a small - matte or polished chrome.

Mounting is largely similar to the installation of hidden fasteners, but much faster. In addition, the wall marked is carried out, according to the horizontal level. The bracket is installed strictly in the place allotted for this.

It is important to remember that any bracket for a removable design should be extensive to firmly hold the wall shelf.

Corners and loops

This type of fastening is most common among consumers. It is quite simple, fast, neat. Suitable for any interior. Unlike bracket, corners and loops of small sizes and are not particularly allocated.

To begin with, it is necessary to determine the place where you need to attach the shelf to the wall.

Of course, it will be better if the selected area is previously not cluttered with pictures or portraits. Set essential materials You can purchase in any construction store. We attach them to a pre-marked place at the external bottom of the product.

For installation, self-tapping screws of various lengths and widths are used.

After installing self-discovers, the shelf must be attached so that the drilled holes on the corners (or loops) coincide with marked places.

If everything matches, then you can twist the screws, trying to do it as smaller as possible, smoothly.

Fasteners for glass products

A glass shelf in any room constantly looks beautiful, and most importantly, appropriate. This subject of the interior creates a unique atmosphere, filling all sunny rays And light guides.

Fastening of such structures should be elected elegance, the crystality of the shelf, while ensuring its fortress and sustainability for a long time.

If you carefully follow all instructions, you can independently fix it glass construction on the wall. The most popular type of fastener is a specialized bracket.

A small thickness (four - twelve millimeters) and the fragility of the shelves leads to the use of soft gaskets designed to protect the glass from all kinds of deformation.

Mounts for such shelves are made in such a way that the surface is protected in the installation section at the bottom and above.

In order for the upper area to remain open, various devices with suction cups are used. They must be secured from the bottom of the glass design.

FEATURES OF MONTAGE

1. Before installing, make sure that all required tools At hand and it is not necessary to look for something in the most responsible moment. Construction level and pencil for determining and marking a horizontal line, perforator for drilling holes. Unsubscribe, hammer and screwdriver, if necessary. And it is also necessary to verify that all materials and gaskets going in the sets are fully suitable.
2. Using a pencil and level, we determine the boundaries of the wall design. We indicate the middle of the installation and ends on both sides, as well as fasteners.
3. In the marked place, drill the right amount holes with a perforator. The depth of the holes should not exceed 60 mm. To do this, in the tool you need to insert a winning D8 drill (before drilling twice check all the sizes).
4. Plastic dowels must be installed in the holes (most often come in the kit).
5. Then it is necessary to attach fastenings so that it is a hole below. For greater amenities used screwdriver.
6. The shelf must be planted on the brackets with smooth neat movements, so as not to pinch your fingers.
7. If necessary, use superclauses for better reliability.

When designing structures, you need to pay attention to the tight fit of the shelf to the wall so that it does not swing and did not hang, because if there are children or pets, unstable design can be unsafe for their health.

Installation rules

Choose the desired location where your design will look the most advantageous. First, before the start of installation, it is necessary to measure the desired shelf to know its thickness, and the level of load, and accordingly.

This is necessary to determine the number and location of fasteners.

For instance, bookshelf It will be more loaded than a shelf with souvenirs. Secondly, it is necessary to determine (at least visually) the thickness and strength of the wall, to which the selected design is attached. If the wall is concrete or brick, then you should not worry.

But if it is thin (less than 10 cm), made of drywall, then it is better to hang anything on her own anything, or at least consult with installers. Basically, only decorative finish is fixed on such walls.

Regardless of the selected method and fixtures, it is necessary to conduct a clear line on the selected wall. This uses a construction level or Waterpas.

It is important to do everything smoothly, because this line determines the place to install the fastener. Reliability - the main rule of installation.

Construction dowel construction fixation is most safe. The only drawback of this species - when dismantling, there are small difficulties.

The strength of the fastening of the shelf to the wall also depends on the properly selected for the size of the construction screws and dowels.

Conclusion on the topic

So we figured out the main methods and variants of materials.

Now you can hang the shelves on their own without any problems. Good luck in repair!

Well, when the house or apartment is furnished with taste. You come from work and plunge into a cozy atmosphere. But there are feelings that something is missing, it is definitely there are places where you need to hang something. Maybe the locker, but it somehow does not fit into the interior or not suitable. Then the best option There will be a shelf. It perfectly suits the overall setting in the house and, that is important, it will help to keep a lot of space.

On the shelves can be kept various subjects, literature.

After his complete pouring on the pins put on the shelf.

On the shelves you can keep various objects, literature. They are attached absolutely in any room. How to fix the shelf on the wall so that it goes well to the interior? It is not difficult, as it may seem. This work Make any, there would be a desire.

When planning wall shelves, the type of fixation has crucial. After reading the attachment method, you can easily select an acceptable option for you.

With the help of invisible fixing. Choosing this species, you hide the fasteners, and the wall design will look light and elegant, in whatever room it hung. It is desirable that the wall is concrete or brick. Wall partitions from drywall are not recommended less than 10 cm.

How to fix the shelf on the wall so that it goes well to the interior?

For wall shelves, you can use a variety of materials.

With the help of brackets. In this case, all items will not hide, they will always be visible. You can save, acquiring metal or plastic corners. Want to give the interior of beauty and originality, buy decorative elements fasteners, but always in a pair. It is necessary to consider important moment - Brackets are not suitable for any interior.

They are attached absolutely in any room.

Working with him does not represent difficulties, and his weight is small.

On glass shelves holders. In such fasteners, rubber or silicone gaskets protect the plane at the fastening site are used. Power holders can be different in size and form, there are options for suckers. They are attached from below, and the upper surface remains open.

This work will make any, would be desire.

How to attach the shelf to the wall?

With hinges and corners. This is the most common way - light, indigrant, does not take much time, fit into any atmosphere. The format of loops or corners allows for a decrease or increase in the load on the shelf. Fastening to guide or metal racks. Not all kinds you can apply in practice yourself. In some cases, it is worth contacting the specialists.

When planning wall shelves, the type of fixation is crucial.

To hang the shelf on a brick or concrete wall, It is necessary to make marking, using the level.

There is a number of items with which you need to get acquainted to hang the shelf in an invisible way.

1. Wall thickness. The installation of the shelf on the invisible mount should be in the event that the thickness of the brick partition is 250 mm, and concrete - 105 mm. If the dimensions are less than the given data, then additional details will be needed. When the wall is made of drywall or slag blocks, and the thickness does not exceed 100 mm, then the invisible fasteners are supposed if the shelf is used as an decoration and light items will be on it.
2. Shelf thickness. It should not be massive or, on the contrary, thin. It is desirable that the material does not fake, was dry and had good finish. If there will be light little things on the shelf, the shelf thickness should be at least 30 mm, you will store literature or more severe utensils - do not exceed 60 mm, but be at least 45 mm.
3. Selection of fasteners. To choose correctly fastening, you need to take into account the second item, and also know which function is intended for the shelf. Invisible mount is mounted loops and metal rods. The loops are attached to the back side of the shelter, make marking. With help required tool The walls are done in the wall and plug insert there. Then the screws are screwed into sufficient depth and hinges are planted on them.

If you use metal rods, you need to remember that the diameter of the fastener must be 10-12. First of all, you will learn what the length and width of the shelf. These data mark on the wall, drill holes. The same holes will need to be done on the shelf. Depending on how the load is, the desired number of pins will be required. They are injected into the wall on half the length of the hole and fix it with glue. After his complete pouring on the pins put on the shelf.

After reading the attachment method, you can easily select an acceptable option for you.

Perforator We do the desired holes.

Fastening for shelves to a plasterboard wall

Exist different kinds Mounts K. plasterboard Walls. Here is some of them:

• Brux mortgages are optimal variation. Mount directly to GLC when mounting to the wall. Brussia necessary thickness Fixed in the place where you will mount the shelves or technique.
• Fasteners are carried out to GLC. This option does not represent difficulties, since the elements of fixation - the butterfly dowels, umbrellas, molly fasteners - easily pass through the plane and screw into the wall.
• Using profiles. In this case, you will need a magnet, preferably powerful, it will ensure fastening strength. In the place where it goes metallic profile, Make holes through. The self-tapping screw should be longer than the thickness of the GCL leaf by 5-6 mm. Then fix the shelf to the plasterboard wall.
• Anchor fittings. Used for fastening shelves capable of withstanding a significant mass. Their diameter should be from 6 mm to 1 cm.

With the help of the necessary tool in the wall, the holes are done and the plug insert there.

Make sure that the drill and hardware are one size.

Necessary materials

For wall shelves, you can use a variety of materials:

• GLC Designers often use drywall in the design of the interior, especially if the shelves from this material assigned one of the main places in the room.
• Wood. Most often used for balcony shelves. Working with him does not represent difficulties, and his weight is small. For proper use Such shelves can serve for a long time.
• LDSP or chipboard. Moisture-resistant material, withstands temperature drops, wear-resistant.
• Glass. Very common in use. Glass shelves look very fashionable.
• Plastic. Publicly available material, as it is inexpensive, is not subject to the appearance of mold.
• Metal. When working with it, the welding machine must be needed.

Then the screws are screwed into sufficient depth and hinges are planted on them.

Required tools

From the tools you will need: level, drill, and better perforator, screwdriver, dowels, self-tapping screws, jigsaw, glue joiner, fastener, set drilling, pencil, hammer, for anchor bolts - wrench.

If you use metal rods, you need to remember that the diameter of the fastener must be 10-12.

Upon completion of all stages of work, attach the shelf.

Fastening process: Step-by-step instructions

How to attach the shelf to the wall? Before starting work on the installation of the shelves, it must be remembered that the holes in the shelf on the back are 5 mm below, as well as ensure that the holes on the shelf and on the wall completely coincide.

First of all, you will learn what the length and width of the shelf.

Having a shelf, align it on fasteners.

To hang the shelf on a brick or concrete wall, you need to mark the markup, using the level. Perforator We do the desired holes. We carry out work carefully, not allowing chips on the wall. Make sure that the drill and hardware are one size. Then join the fastening elements, make a check construction level. If necessary, we carry out adjustment.

Depending on how the load is, the desired number of pins will be required.

Using bolts with nuts, screws or screws, fix the shelf.

Upon completion of all stages of work, attach the shelf. If you did not make it yourself, but purchased in the store, then all necessary elements Fastenings are attached. Having a shelf, align it on fasteners. Watch that there is no cracks between the shelf and the wall. Further make a pencil mark of all holes. Using bolts with nuts, screws or screws, fix the shelf.

They are injected into the wall on half the length of the hole and fix it with glue.

If you did not make it yourself, but purchased in the store, then all the necessary fastening elements are attached.

If necessary, we carry out adjustment.

VIDEO: Fastening shelves to the wall

The corners in the room almost always remain unoccupied, and meanwhile there is enough space to accommodate a small shelf, rack or suspension. From a design point of view, the angular arrangement gives some advantage, because this articulation of the walls is expanding the possibility of applying various configurations of structures and used at the same time. If you compare conventional and angular shelves, you can immediately notice how much more and more attractive looks like. Let's try to decorate your house with such an angular shelf.

The most popular materials for the manufacture of shelves are wood, furniture stove, MDF, laminated DPP etc. Sometimes shelves are made from undergraduated means - laminate, plastic or even drywall. We will not change the traditions and as raw materials take the furniture slab. You need a jigsaw, drill, various fasteners, roulette and pencil. First you need to make an outline of the future shelves for clarity of workflows.

The shelf will be a height of about 70 cm with three sections. Molding will be attached through vertical elements using a dowel-nail dowel, and each other items will be connected by confirmates.

The first thing to do is to place all the details on the stove. This is usually done with a pencil, but if the plate has a dark surface, the trace of the pencil will not be noticeable, in this case, you can use a knife. It is necessary for his blade, without pressing himself, to spend the drawing, after which a thin, white, a noticeable line will appear, which will be easily sawing.

It is possible to use the electric bison to cut the shelves. Saw blade It should be with a small tooth and target wood. The feed speed controller on the jigsaw should be set to a minimum value, and put the mode handle to "0". To facilitate the assembly of the shelves, it is necessary to numbered the parts in the drawing, and then put the appropriate values \u200b\u200bon the elements of the design.

After all the details are drinking, you need to drill holes in them to connect confirmates. It is much easier to do it consistently. First you need to make holes in the shelf, and then through these holes to drill the corresponding it in the supporting element. If there is no special drill to confirm, then you need to use 3 ordinary drills With different diameters - under the screw part, thickening and a Hat of the Eurovint.

Immediately at this stage, you can make holes for fastening the shelf to the wall. It will be attached to a dowel nail 6x80 mm through supporting elements. All holes need to be divided, it is necessary so that the nail hat is flush with the surface.

When all the details are drinking can begin to decorate the edges. First, all edges we clean from dust and sawdust formed when sawing. Then apply to the ends edid ribbon. And with the help of a preheated iron (it is desirable to take the old, unused) glue it to open surfaces.
Such a passing tape is produced by a standard width of 1.8 mm, and the thickness of the furniture plate is only 1.5 cm, so part of the tape remains unnecessary and it must be removed. Sut the extra part of the edge using a conventional wallpaper knife.

The resulting edge is cleaned emery paper With small grain. You can close the ends with any other affordable method, for example, use a decorative cord, braid, special paper or cardboard.
Now you need to collect the shelf. Assembly conduct in accordance with the numbered scheme. To twist the confirmates, use the hex key.
Sinterily collected design On the place intended for it and celebrate the attachment points on the wall. For drilling in concrete or stone Walls We use a drill with a winning tip. On the starring of the drill, you can note in advance the depth of the drilling required for the prepared dowel. In order for dust to be formed when drilling, it is possible to glue the paper "pocket" to the wall under the work.

After completing drilling work, you need to insert a dowel in the holes and through the appropriate elements of the shelf to fix it with screw nails, drowned the hats. You can do it with a hammer or a conventional cruciform screwdriver.

You can decorate open fasteners caps using special plastic plugs of suitable color.
Perhaps such a shelf will also be too easy to look, but we made it from the materials that often dust in our storage room or live their own age at the country. The design can be changed at your discretion, for example, to make longer supporting elements and then the shelves can be used as books. Or choose a different outlining of end parts, in this case the shelf will acquire additional decorativeness. In any case, the subject made by their own hand will serve as an example of the individual mastery of the hosts of the house.