Polycarbonate gazebos: Advantages, construction stages. Polycarbonate gazebo, made by hand the final processing of the finished design

Arrangement of the courtyard area country house It assumes the creation of a certain sufficient degree of comfort. In the courtyard is often designed: a full-fledged pool, a place for the garden is assigned, it is installed covered by the mandate of the brazier.

With decorative wrought elements

That is why we collected for you a selection of photographs of steel and polycarbonate gazebo, who over the past couple of years have become very popular on the market.

We want to gather here the most best ideas From everything russian Internet So you can choose the best option for your cottage!

Photo of a metal gazebo with polycarbonate for giving can demonstrate every connoisseur of mental sites outside the house. it little structure It often becomes the main place of stay of all guests at any time of the year.

Important: Considered in another publication. Here we get acquainted only with the best design solutions and photographs of the arbors.

If wooden buildings for several seasons can come to unsuitability, then erected from newest Materials Arbors have a much larger service life.

With forged elements

Everyone wants to create a resting place that can delight all coming years. The need for a gazebo of polycarbonate and metal in country conditions is often underestimated.

This design is characterized by several advantages:

1. Metal frame allows to reduce the mass of the structure. Due to the ease of polycarbonate, the gazebo does not require the foundation as a basis, and if necessary, it can be easily dismantled and rearranged.
2. Minimum design complexity. Typical buildings are mounted without occur stone situations. If desired and availability required tools The process of making the frame and its further trim under the power of any owner.
3. Availability and low cost of raw materials. All components of the construction do not have the conversion cost, but to purchase funds possible in the nearest construction center.
4. Material is easy to use in different options Finishes.

Separate construction

Polycarbonate panels The rest building contributes to visual expansion of the space space.

Using a yellowish shade of this material as the overlap creates an illusion natural lighting Even in motley days.

With mangalom

On a note: The positive property of the technological plastic is considered high thermal conductivity.

The presence of an air layer in its porous structure in combination with minimal heating makes stay inside the arbor quite comfortable.

For garden

When designing a recreation area in the center garden plot Do not worry for possible shortcomings This placement.

Thanks to the unique quality of polycarbonate, almost any place becomes perfect for sincere conversation. There is no more advanced alternative to the sheath for arbors than polycarbonate.

From polycarbonate and metal has the following features:

1. High ability to confront physical shocks. In comparison with the strength of ordinary glass panels, the technological plastic is 200 times greater than the nearest pursuer.
2. Polycarbonate trimming is resistant to corrosion.
3. With additional processing protective composition Capable by 86% block the penetration of ultraviolet.
4. The material is convenient for processing.
5. It does not figure out when breaking into pieces.
6. The ignition temperature is quite high, which makes the material refractory.

Any coating contamination is easily eliminated by the usual wash. Polycarbonate is unpretentious to various cleaning compositions. Repair of the erected home recreation zone can postpone for years.

Periodically requires a minimal tipping arbor to restore initial aesthetics.

The cellular lattice structure of the polycarbonate is perfectly coping with the suppression of various noise, which only increases comfort from staying inside.

From profile pipe

An alternative substitute for metal components can be the usual profile pipes.

For installation, long elements with square or rectangular type of cross section are purchased. Square form has a maximum stability indicator.

Due to the ease of pipes, it is possible to save significant funds to arrange the foundation. A common practice in the construction of such arbors is the complete absence of a reliable basis.

The ease of the frame, if necessary, ensures the possibility of full carrying of the structure. Right form It becomes the main guarantee of the reliability of the assembly of the whole design.

To build a structure with an internal stationary mangal, laying a ribbon foundation is required. With structural ease, it is possible to restrict ourselves to the column fill of the concrete or its complete absence.

The gazebo from the profile and polycarbonate is equipped with two varieties of roofs: direct and more universal scope.

The first option is suitable for seasonal construction, because snow load in winter It can completely destroy the comfortable platform for guests. The scope roof is a universal option that is installed on unintended frames of arbors.

Of different shapes

When choosing the location of the new home for the gatherings, many mistakenly focus solely on natural natural details - wind direction, presence of vegetation, landscape irregularities.

However, the choice of frame shape largely determines future overall functionality.

Metal gazebos from polycarbonate are classified according to the following structural forms:

1. Round buildings.
2. Square recreation areas.
3. Arc-shaped projects.
4. Multifaceted options with several dedicated rooms.

Before choosing the optimal form, you should consider the filling of the internal space with kitchen appliances, furniture and other interior objects.

If you need to properly place all items, it is better to build a rectangular structure of large size.

Arcurate

The form of any construction is the main factor of attractiveness. Standard rectilinear motives will tell about the owner as a supporter retro styles And his strict look at things.

Usage by own plot Arc-shaped smooth lines are characterized by the following distinctive aspects:

With a beautiful arcuate roof

1. Unrivaled ideological originality. The round construction of the walls sometimes creates the effect of bulge, which when switching to the roof becomes a reinforcing spherical factor.
2. Maximum harmony. Lack of straight corners clear lines It is a feature of a natural decor. The arbor from the polycarbonate of the arcuate form can easily fit into any garden composition.
3. Completed aesthetics of the image. Since we are faced with an overwhelming majority rectangular shapes Buildings, then finding in a semicircular structure will be true pleasure.
4. Cropling creates natural wind protection. Air flows will stop crashing into the walls. They, on the contrary, will overtake each element separately.

Metal

On a note: If you want to arrange arbor in the open area, you should prefer precisely semicircular arc projects.

This type of fence of the recreation area will protect inner space From excessive purge.

Round (dome)

The construction of the dome design is suitable for pets of incarnation of non-standard solutions in reality.

Arbors from metal and polycarbonate are characterized by non-standard layout, which when choosing furniture creates certain difficulties.

Sharo-shaped

Classic options for internal decoration of the interior are not enough, so better decision For arbor arbor will be the use of registered furniture.

Minor inconveniences during arrangement cannot block the mass of positive features of this type of construction:

1. In the process of assembling the project, it is possible to save about half of the resources that are spent during the construction of classic arbor models.
2. Installation of the design does not have difficulties, performed without filling a full-fledged high-quality foundation. The concrete basis is completely absent.
3. Strength and resistance to wind gusts. The aerodynamic qualities of such an object allow you to stand under the head of the winds of the storm warning.
4. Uniqueness of the interior. Thanks non-standard form The situation is always unique.

Dome designs are an impersonation of advanced forms and future trends in construction. Such a specificity allows guests to feel ease, an emotional tide and a feeling of complaunt.

Square

The rigor and the simultaneous refinement of square forms makes adherents of the right lines to equip country sites Square arbors.

A small building of this type will easily be located in the very corner of the courtyard area, which will allow you to maximize the free space.

The gazebo from the profile pipe and polycarbonate with a square frame is characterized by the following advantages:

A cozy gazebo in the country is not only a place to relax, holding picnics with friends. Such a necessary country building can perform the role of the dining room, summer cuisine, verandas. Takes you from the heat, rain, wind gazebo from polycarbonate with your own hands. The photo most often erected designs will be attached below. In addition to its direct destination, this construction gives the site a special atmosphere of privacy, comfort, aesthetic completion, harmony.

Arbors can be absolutely different configurationssizes. For their construction, a wide variety of materials are used. However, the gazebo for giving from polycarbonate was especially revered by dacnis, due to its aesthetic attractiveness and relatively low price. The additional advantage of this choice will be the speed of the building process, the harmonious combination of polycarbonate with other building materials (stone, wood, metal, forging, brick).

Gazebo for giving from polycarbonate - Pluses

What is the advantage of arbors from this material Before the rest of the summer options?

1. Easy weight, the ability to set the design in any preferred place.
2. Competitive value of the arbor, compared with other analogues.
3. Ease of installation - you will not need to attract a construction team or some complicated equipment for the construction and installation of polycarbonate design.
4. The ability to combine with other construction materials.

Polycarbonate plastic, it is easy to drill, cut, it has an excellent light light-resistant ability, resistant to temperature differences, durable.

For example, a gazebo-canopy is done very quickly, as the design does not imply special frets, joints, docking.

Photo Arbor for giving:

If desired, you can fantasize with the design of such simple example, add side fragments from the remaining pieces of polycarbonate.

A more original model is a garden gazebo in the form of a semicircle. Here you have to work a little over the bends of the frame, gently bent the leaf itself.

Gazebo semisphere, photo:

Wooden gazebo with polycarbonate fragments may look like a lightweight option. And it can be represented as a separate house with transparent walls.

Photo Polycarbonate gazebos for giving:

A gazebo from metal products and polycarbonate is an excellent budget, very common option. Main works are the manufacture of a frame, initially the project is made, all necessary materials. Please note that for cutting sheet polycarbonate you need to use a special saw with small cloths (large teeth crumble material).

To work you will need standard set Tools, as well as drill, saw-bollard, large scissors, welding machine (in some cases), screwdriver.

If you choose on this material, before building a gazebo in the country, take note of the main features of polycarbonate:

1. In the wind, this material manifests itself like a savage, so before installing, make sure that the weatherless weather is planned on this day. Making a fastening of particularly large sheets with a strong wind, you risk will not resist and fall from the height. In general, it is better to invite a partner to arrange the roof, he will force you at the right moment, and an extra pair of hands does not hurt in this matter.
2. After the end of the fasteners, be sure to remove the chips and the construction trash from the cell.
3. Holes (drilling) on \u200b\u200bpolycarbonate are made between the Röbeber, while the minimum indent from the edge of the sheet should be at least 4 cm.
4. All ends must be sealed by the appropriate materials for this. Only the lower parts of the attached fragments remain open - this is necessary so that the moisture is unhindered from the cavity of the sheets.

It is also worth considering that transparent polycarbonate sheets are less hot (expanded) under the rays of the scorching sun, compared with color analogues.

Gazebo in the country with your own hands - Instructions and photos of construction

Most arbors have a light design and weight, if you have such a plan, then the capital foundation does not need. The option with concreting site under construction will be more relevant. To do this, remove the top vegetable layer from the soil and make a gravel substrate, about 10 cm thick. A concrete is put on top of the rubble, about 10 cm layer, the surface is aligned with the ruler or segment of a wooden board.

If your gazebo for giving will be covered in the evening, then all the electric pipes should be laid in the "foundation" at the stage of falling asleep with the gravel pillow. Everything electrical cables hide in special plastic protective tubes. Also, even before laying a concrete, you need to build in the corners of the future conversation pipe base (preferably square section). They should be pre-deepened to the ground by 50-80 cm. Pipes (5 × 5 cm are suitable) perform the role of the main pillars of the frame. They will have the main weight of the whole design. When installing pipes, use the construction level and roulette - all parts must be immersed in the soil to the same depth.

At the same time, the sizes of garden gazebos for giving can be any way, however, the support pipes should be located in each corner, as well as under carriage walls (If the structure configuration requires). After the concrete freeze, the vertical pipes should be attached to the vertical beams - you may need a welding machine. Not only polycarbonate sheets, but also benches for seating will later be fastened to these runs (if it is conceived). Metal frame gives a wide field of activity for your imagination, optionally you can combine such a design with openwork wooden parts, artistic forging fragments. Stone inserts (both natural and decorative), elements of a vine-braid, solid brick columns - everything that you like, harmonizes with common picture Houses and plots can be applicable.

As for the roof, a single model, of course, is the easiest option. More intricate design requires a complicated framework scheme, welding additional metal racks in the top frame area. To increase the stiffness of the structure may require an additive of intermediate beams. They are welded along the edges and in the middle of the roof frame - it is to them that polycarbonate sheets will be attached. On the photo attached below, just a gazebo for giving with a roof of polycarbonate.

Roof Arbor, photo:

It is worth emphasizing that all fastening manipulations should be made using special thermoshab. These elements have special protective covers, are the most best options For attaching exactly cellular polycarbonate.

Thermosicles, photo:

If a volumetric gazebo from polycarbonate is assumed, and its roof will consist of a variety of individual fragments, then all locations of the compound must be treated with silicone. For a lot of reliability, you can sew the joints with a special perforated ribbon. For better consolidation of sheets, special n-profiles are also used, while the profile itself is attached to the framework of screws or screws. Polycarbonate fragments are inserted into the profile grooves, if necessary, the sealant is additionally used.

As mentioned above, one more free hands will not only prevent you, but also optimize the workflow. Sometimes according to the structural features you have to bend, hold and fix large lists, And one is very difficult to do it.

Gazebo for giving from polycarbonate, photo:

So that your gazebo is not only practical, but also cozy, it can be decorated with relevant details. For example, the same reference pillars can be shaved with curling plants or weld reliable metal holders to them. flower Gorshkov. If the gazebo has small sizes, the side walls should be additionally strengthened - so they can be able to become backs for benches. Consider that all the elements of the arbor will constantly interact with weather manifestations, temperature drops, so all the details of the construction should not be afraid of moisture. Lighting devices also need to have a high degree of moisture and dustproof (special electrical appliances with an index of protection not lower than IP44).

Whatever your gazebo of polycarbonate, the photos presented above are only the initial, most common design options. If the area of \u200b\u200bthe site allows, and your fantasy suggests new non-standard ideas, this building can be a completely unique architectural creation by all envy.

Arbor, photo - simple and beautiful

Many owners of their homes or country sites wish to somehow elegantly equip their yard. And the option with a gazebo to achieve such goals is suited. How to do? In the country or in the cottage you can create from different, modern materials. The most optimal solution is polycarbonate. After all, he has such advantages:

1. Facilities are harmful. And under such a gazebo, it is not always necessary to fill the foundation. And dismantling, and the dislocation of this arbor is very simple.
2. Ease of manufacture. Such a gazebo is available in sales already in the finished form.
3. Applied materials are available. At the cost of the conversation, it turns out more profitable brick, wooden or wrought.
4. This material perfectly combines with many materials (wood, metal, etc.)
5. Easy in drilling and cutting.
6. Flexibility in directions along and across.
7. Polycarbonate Polycarbonate do not merry.
8. It has excellent strength.
9. His operating time - 20 years.
10. It may function in the humid climate.
11. Racks to thermal drops.
12. Excellent light traffic.
13. Powerful resistance to ultraviolet.

There are two main types of polycarbonate:

1. Cell. Guarantees excellent heat and noise insulation. Hides the interior of the arbor. Scatters ultraviolet.
2. Monolithic. Creates visual panoramic glazing. Absorbs ultraviolet.

Criteria in thickness:

1. Sheets from 2 to 6 mm: small arbors for 2-3 person.
2. 8 mm. They have excellent resistance to winds. Suitable for arbors for 4-5 people.
3. 10 mm. Tasks: barbecue area, big gazebos 8-12 persons.
4. 16 mm. Create a powerful protection against winds and cold weather.

For better dispersion of light it is better to take sheets light tones. Dark transparent options are also suitable.

Work on the external design is as follows:

1.Facade is separated. Just the necessary operation for open arbors. Wooden components are painted and covered with varnish.

1. Arrange the path to the conversation.
2. Curbs are put around the perimeter.
3. Lighting is carried out.

For metal polycarbonate combinations It turns out the structure of powerful strength. In the work you will need corners and pipes. The action plan is:

1. Supports.
2. The lower strapping is carried out, the floor is laid.
3. Prepared fence and roof.
4. Mounted polycarbonate.

The work of work here is similar to the previous version (polycarbonate - wood), but there are nuances.

If you have a finished project, you need the next set:

1. Steel tubes. Parameter - Ø5 cm. Material - steel.
2. Metal corner. Parameters: 4 x 4 cm. Task: Production of rafters, fences and strapping.
3. Fastening elements: brackets, self-tapping screws (metal view).
4. Floor finishing material. Examples: Tree, Concrete screed.
5. Polycarbonate. Elements for its fastening.
6. Sealant.
7. Welding machinery.
8. Haysaw (metal view).
9. Bur for soil.
10. Sculpture.
11. Electric jigsaw.
12. Passatia.
13. A hammer.
14. Level.
15. Saw, capable of cutting polycarbonate.

If you do not know how to weld metal or you do not required machinery, hide a specialist or rent a device for a couple of days.

Fastening support elements and floor bases

Work plan:

1. Creating markup. Definition zones for support.
2. In the soil is created holes (need a burden) depth of 70 - 100 cm. Diameter - up to 10 cm.
3. Bottom covered with sand and rubble. The layer is a maximum of 20 cm.
4. In Jama pipes are introduced, put in level. Supports support before the fill of the concrete. A wooden timber is useful here.
5. Concrete poured, harden.
6. After its complete drying is done lower strapping. Corners are attached to the pipes by welding. They are placed on top of them and flooring for the floor.
7. To attach the lag in the corner holes are created. Fastening goes with bolts.
8. Instead of the flooring you can arrange a concrete tie (as an option).
9. If you intend to place in the future gazebo, the design need to be sewed with fire-resistant material. The wooden floor is excluded. Only a screed of a minimum thickness of 40 cm.

Work on the carcass

1. Fasten fences. Transverse support elements are welded to the racks.
2. Overweight is welded. It will house the roof for a gazebo from Polcarboat.
3. Welding rafters and other components. It can be arranged directly on Earth, but only on a flat surface.
4. Frame rises, reliably welded to the support pillars.
5. The whole frame coloringcoated with anti-corrosion products.

An example of a metal frame:

Finishing work

After work on the frame, you need to glazed the gazebo polycarbonate. Do it yourself the sheets of work material in advance are reproduced on necessary size. To cover the roof, you can apply the same material, as a last resort, slate or professional flooring is used.

For mounting the working material, holes are pre-created in the corner. Sheets are fastened with self-drawers having thermoshabs. This fastener should not strongly clamp the material. For docking polycarbonate need Special plastic profiles. Button areas are processed by any sealant.

Option from the profile

Example (photo):

Here the installation is similar to work with a metal option. Only the base consists of a combination profile - polycarbonate.

The work requires a profile tube. Its desired section: Square or rectangular. For gazebo, a square profile of aluminum or other metal is optimal. His durability and stability resistance is very high.

Required tool:

1. Welding machinery.
2. Haysaw (metal view).
3. Bulgarian.
4. Electric drill.

Creation of foundation

Taking into account the ease of profile and polycarbonate the foundation of powerful strength to garden gazebos is not needed.. Optimally to arrange here ribbon foundation With minor bulk.

Work plan:

1. On the perimeter of the alleged gazebo, a trench is created. Maximum depth - 30 cm.
2. Her bottom falls asleep with rubble.
3. The reinforced belt is created from the rod.
4. Created formwork.
5. The pouring of concrete. Metal elements must be laid in concrete. They will then join the profile.

If a large gazebo is built, the trench is made at a depth of 70 cm.

Work on the basis is made in strict accordance with the drawings. Details are cut into the desired segments. Prepare supports for fastening the roof. It is best to concrete them. You can also attach to mortgage elements, but this option is less durable.

Example of fasteners of the roof:

You can connect all the frame elements by bolts, but this option has low strength. Therefore, it is better to have all the components to privacy with each other.

For the roof, polycarbonate can also be applied. The main thing is to fix it.

As a rule, gazebos from aluminum profile Less reliable. In addition, this material is not profitable at cost.

1. Metal combination - polycarbonate

1. Option with.

1. Version with paving track.

1. Option with polycarbonate roof

1. Modest gazebo.

1. Mobile option.

1. Option of rectangular shape.

When creating a gazebo of polycarbonate with any combination and any kind of extremely important remains financial Question. Next, some examples of prices are proposed.

Polycarbonate (per sheet):

Depending on the manufacturer, regions, quality and parameters, prices vary.

Ready gazebo. Examples

There is also a huge price range. Important as the parameters of the design itself and the working material for a beautiful gazebo.

Instructions for video

One of the most intelligent video on the topic. The process of assembling a gazebo from a metal profile with a roof of polycarbonate - in all parts. Minus material - you have to prepare for a long view.

The gazebo is a great opportunity to stay in air, and a good gazebo is a full-fledged vacation in nature, and it doesn't matter what the weather is on the street: wind, heat or rain pouring.

Stock Foto Summer arbors made of polycarbonate, sidewalls from transparent material protect from lateral wind and precipitation, but not blown overview

The material easily cuts and bends, docking through special slats, so you can construct not only convex roof, but also the roof of more sophisticated forms, such as vaulted, holm, dome, conical or concave on the manner of eastern pagodas.

Photo country arows from polycarbonate S. different forms roofs

Sphere

Spherical arbors are one of the most original designs. But to independently build such a gazebo for only masters with golden hands. It must be said that this option is very convenient for regions with constant rains and wind.

The frame can be bent out of metal products or to build out of wood, work is painstaking, but it is worth it, it will undoubtedly decorate the site and will become its highlight.

Closed gazebos from polycarbonate, photos of the sphere that can be rotated in any direction

Polycarbonate

Polycarbonate is cellular, it is a cellular, hollow with jumpers (rigid ribs) inside. And monolithic, which does not have voids, it is transparent as glass, but much stronger and easier.

Both types are manufactured both smooth and with ribbed (profiled) texture. It is an eco-friendly and safe material that maintains large temperature differences is not cracking, not melting, not deformed. Due to the flexibility of polycarbonate, it can be easily made not only simple, but even round gazebos.

Other advantages:

• heat-resistant, not flammable independently and does not support combustion;
• delays UV rays;
• shockproof and withstand heavy loads;
• has high thermo-, noise and sound insulation characteristics;
• huge selection of colors.

Reply definitely, what polycarbonate is better for a gazebo. Here you need to be guided by design and your own preferences. If you want the roof to be practically not visible, and the price is not worth the price, then the monolithic sheet is preferable. And if you need a durable, reliable, practical, functional, but at the same time a beautiful gazebo at an affordable price, then the cellular panels with a thickness of 8 mm will come to the way.

Very often make combined garden gazebos from polycarbonate, photo successful combination Heavy Brick and Light Sauce

Project

Polycarbonate is so simple and convenient to work that with their own hands you can build any design, from a simple canopy to elegant multi-level pagoda. To implement the idea, it is necessary:

• select a place on the site.
• determine the size of the structure and budget;
• pick up the design of the gazebos of polycarbonate in accordance with your taste preferences, as well as the functionality, which is planned to load the structure, and shared landscape design;
• make a project, purchase materials and can be safely started to build.

Polycarbonate gazebo photo of an exclusive design, the design of the structure should harmoniously fit into the landscape of the plot and echo with the architectural ensemble of the main house

Blueprints

The design of the polycarbonate gazebos should reflect the size and design of the structure. But the main task is to properly draw up a structural framework. Materials should be thought out for the base, as in which sequence will be attached to the details where supports will be placed. Be sure to calculate the weight of the design to correctly distribute the load on the bearing elements.

The finished drawing of the gazebo from polycarbonate can be found on the Internet, and independently adapt it to your needs. It is most common to build a gazebo on a metal frame or on a wooden basis.

Beautiful metal arbors with polycarbonate can be made from ready-made forged segments

How to make a gazebo do it yourself

To build a hexagon gazebo, as shown in the diagram above, first of all, a columnar foundation should be pouring under vertical supports, and when the concrete freezes, it is necessary to link the headguings with a metal corner or channel over the perimeter. Or you can arrange a slab base under the entire area of \u200b\u200bconstruction. The stove will subsequently become a draft floor.

What you need

Materials for the arbor are better to prepare in advance. All metal parts must be cleared of rust.

Required:

• 6 metal columns, a diameter of 100 mm, for mounting to the foundation it is necessary to weld metal soles from one end;
• 5 finished forged sections, or you can cook the frame from the corner yourself, and then sew them with polycarbonate or wood;
• 12 forged decorative corners;
• metal rolling (corner or pipe) for roof frame.
• polycarbonate;
• fasteners;
• soil and paint for frame.

Finished wrought section for the rail will decorate the gazebo

Step by step

To install pillars and attach them to the help of anchors, it is better to additionally weld them to the bottom strapping. Be sure to check the vertical vertical to keep the gazebo geometry. The tops of the pillars around the perimeter are tied by metal, the binding will be built the design, and serve as a support for the roof frame.

The roof is easier to make the pattern on the ground, and then raise and install on the place. Metal rolls cut through the length of the roof of the roof, all will need 6 pipe segments. The skunk assembly (circle with a diameter of 50-100 mm) can be cut from a metal sheet with a thickness of 5 mm. Cut the pipes at the desired angle to the skate node. Raise the design on the base and welding to connect the details. Next, you can install the railing, and decorate the arbor with decorative corners.

So it should look like a frame in the finished form

How to attach polycarbonate

Leaf carve out the template, only 6 parts by the number of skates. Polycarbonate is elastic, it's easy to work with it. Cover the frame to the part, the drill is drilled through the sheet and metal-plastic. Next to it screws the screw. To prevent the leakage subsequently, it is better to use roofing fasteners that has a rubberized hat, or special fastening systems for polycarbonate.

Polycarbonate connecting elements

Skates are connected to each other through a special docking element, which is reliably protected design from moisture. And the edge of the roof is close to the end plank. It remains only to paint the gazebo.

If you are a happy owner of a private house, then surely thought about a separate recreation area. IN this case Gazebo is a great choice. Such structures can be performed from polycarbonate, differing from not only aesthetic attractiveness, but also to durability. But first things first.

Technical indicators of polycarbonate

The arbors from this material look very easily, you can even say - immanently, but in reality it is a rather reliable and strong facility. The lion's share of the strength of such structures falls on the characteristics of polycarbonate - perhaps the most durable of transparent construction surfaces. From a huge list of positive factors, the following is allocated:

Minor weight - applying for the roof of your arbor is the coating, you will forget about laying a powerful and cumbersome foundation, as well as on the installation of solid supports and supporting structures;

Impact resolution - polycarbonate hundreds of times more stronger than glass, and plastic plastic is largely in this indicator. For proper montage He is not afraid even quite large degrees;

Convenience in the installation is really a technological material, it is simply cutting it, fixing, drilling and bend. It will save you a lot of time and strength;

Ultraviolet protection - To increase this indicator to a maximum, it is enough to purchase a special coating or polycarbonate with the already applied protection. You will save yourself from scoring rays, while transparency will remain at a decent level;

Sustainability with respect to weather changes - polycarbonate is not afraid of snow and rain, it is not subjected to rotting and the appearance of mold, even tolerates very strong temperature drills (within 160 seconds);

Safety - the material is not lit, and if you get it to break it, then its fragments will not be so dangerous as in the case of glass.

Advantages of polycarbonate arbors

Agree that polycarbonate is not the first material that comes to mind when memories of gazebos, even despite its excellent technical qualities. However, it is worth considering it for this type of facilities:

- indicators such as flexibility and plasticity, will be able to turn your idea of \u200b\u200bthe configuration of the construction for recreation, its appearance and the ability to fit into modern design;

- thanks to a small weight building material You can build a design that can be moved from one location to another, so you get a truly mobile canopy. At the end of the summer season, simply transfer the gazebo to the shelter;

- Buildings from polycarbonate look easily and transparent, which is especially important for small sections - they do not clutter the space and do not become an obstacle to inspect the territory;

- Cellular construction guarantees the soundproofing properties of the material - strong wind or shower will not make you increase your voice when congently with loved ones;

- polycarbonate retains heat better than glass, and you will feel comfortable even in winter, of course, subject to the heated room;

- Among other things, this arbor is very easy to care - adding the design metal carcasyYou will be sure that the repair will be needed very soon.

Cell and monolithic polycarbonate

Today on construction market You can find two types of material - monolithic and cellular. The first variety allows you to get a very attractive transparent structure. Externally, such polycarbonate is similar to glass, while it is not so heavy and fragile. You can choose a ribbed or smooth material texture, depending on your own preferences.

Such arbors are beautiful, but cost enough, so they are infrequent. Also note that if you want to complete the roof from such material, then you will definitely buy options with a thickness of at least 0.5 cm.

Cellular modifications are characterized by a good value ratio and qualitative characteristics. They are not as beautiful as monolithic surfaces, but more practical, cheap and lungs.

For the gazebo, select three- or two-layer materials - depending on the qualitative characteristics, they will be able to serve from 20 to 50 years. Suitable thickness of cellular coatings - 0.8 cm and more.

To make the right selection of the arbor, let's look at what options we have in the case of polycarbonate buildings. So, the arbors may vary, on the basis of:

Their forms - install the structure in the form of a polygon, rectangle, circle or oval;

Functional destination - structures can serve as a place to relax outdoors or act decorative element Garden, moreover, the construction can be additionally equipped with Mangal;

Transfer opportunities - as already stated earlier, the gazebo may be mobile or stationary;

Design Type - Choose from closed or closed, complexized structures or simple canopies.

Subtleties of mounting arbor

If your conversation is massive and large, and the basis will serve as a combination of heavy wood, bricks and polycarbonate sheets, the construction of the foundation is the necessary step. For semi-closed-type arbors, a ribbon foundation is quite suitable or a column version. For larger, massive structures, it is better to pour a monolithic base. In addition, if you decide to install a fireplace, a tandoor or a brazier, then for them you need to put a heat-resistant platform separately.

For light buildings, it is quite enough to install carrier pipes that will take the weight of the entire structure. This is a very reliable and simple base for a gazebo of polycarbonate.

Without a reliable and strong framework, it is difficult to get a high-quality gazebo. The following materials will be suitable for manufacture:

Corners or metal profiles. To assemble the basis of the arbor from this material, you will need the ability to appeal to welding apparatus. The undoubted advantage of such a building is strength and indisputable durability, the costs should be attributed to the cons.

Wood. The wooden base for a gazebo from polycarbonate is quite simple to collect with their own hands. This is a fairly inexpensive solution that will delight you with your external species, environmental and harmony with the surrounding nature. But it is not necessary to forget that the tree requires periodic processing and care.

When stripping and fixing polycarbonate sheets, focus on the following aspects:

1) Transparent varieties The least is subject to expansion and heating, and therefore, if you prefer this material for the construction of the walls, select a transparent product;
2) so that the sheet does not start crumble, it is better to cut it with a tool with small teeth;
3) Make holes between the edges, departing from the edge at least 3 cm;
4) For security reasons, perform the mild weather;
5) Cellular polycarbonate Creparate with thermoshab;
6) Butts on the roof process with silicone.

Polycarbonate gazebo is better to construct, using a combination of materials. We will give an example of the construction of a metal framework. Metal will ensure the strength and durability of the design. Supports will be mounted from corners and pipes.

Best Location For Arbor - Smooth Surface With Deep Swelling underground water. If you place the building in the lowland, take care of a serious foundation, which will protect the construction from flooding.

So, first of all, spend the markup of the site, leaving a place for the frame. Next dug your recesses, a depth of 1 m and no more than 10 cm in diameter. Their quantity should be indicated in the plan. Squeeze and fall in the pits crushed stone or sand by 20 cm.

Install the pipes in terms of the level and from the bar, make the struts for them, concrete. After the concrete hardens, proceed to the strapping below.

We weld metal corners to the pipes, and on top of them bolts fix the lags from the tree. Welcome details for top strapping.

Roof frame Describe on Earth, and after the finished design, fasten up the top.

All metal elements treat special tool against corrosion.

After the procedures conducted, perform flooring - it can be created from the tile after filling the screed or using boards.

Cut polycarbonate sheets and secure them with self-draws and thermoshaybami. Apply the sealant to the joints.

Want an indoor recreation area with barbecue or mangal? Great idea! But before running to the store for such a device, it is worth taking care of fire safety.

First, please note that the place for the furnace should be equipped with a foundation from concrete, covered with a thickness of at least 40 cm. Place the gazebo away from the neighbors section, other buildings, as well as from shrubs and trees. The optimal distance is 5 m.

As finishing materials, use refractory materials: tile, brick, stone. Place the selected area of \u200b\u200bthe oven before installing polycarbonate sheets.

Polycarbonate gazebos - Photo

Polycarbonate arbors are attracted by a variety of forms. We collected photo ideas that demonstrate multiple structures, and will also help you choose the most optimal option for you. Happy viewing!