what kind of ceiling to do in the bathroom

Starting a conversation about what kind of ceiling to make in the bathroom, you should exclude those types of finishes that are not recommended for rooms with high humidity.

After that, you can carefully study the characteristics, appearance, cost and installation technology of the remaining ceiling structures and materials in order to choose the best option.

What not to finish the ceiling of the bathroom

Requirements for materials for wet rooms

The bathroom is the wettest room in the entire apartment. In addition, its decoration and interior are constantly exposed to temperature changes and the risk of being flooded by negligent neighbors from the upper floors.

Therefore, there is no need to convince someone that all materials used for repair and decoration must be moisture resistant, resistant to corrosion and fungal growth. It is also very desirable that the surface be easy to care for (see).

Based on this, we can conclude which methods of finishing the ceiling in the bathroom are better not to use.

Materials not suitable for use

• Lime whitewash. This is not to say that this type of ceiling decoration in the bathroom is completely unsuitable, because our parents have used it quite successfully for many decades. But against the background of modern materials, lime looks rather boring, besides, it needs to be periodically washed off the ceiling and applied with a fresh layer.. And this is a very tedious and dirty work.
• Chalk whitewash. In addition to the disadvantages of whitewashing with lime, the chalk layer on the ceiling is an excellent breeding ground for mold.

• Coloring oil paint or enamel. In wet conditions, such a coating quickly loses its attractiveness - it begins to turn yellow, crack and crumble.
• Wallpapering. No comments.
• The device of a suspended ceiling from ordinary drywall, fiberboard, chipboard. All of these materials absorb moisture and deform, and the slightest leak from above will force you to do a major overhaul.

Modern ways of finishing ceilings

Painting the ceiling with water-dispersion or latex paint

What is the best way to finish the ceiling in the bathroom if you don’t want to lose its height? One of the options is painting, but not with oil or enamel, but with modern coloring compounds that are resistant to high humidity, temperature extremes and containing special additives that have bactericidal properties and prevent the formation of fungus.
True, this type of finish requires careful surface preparation and does not save from flooding.

1. Clean the ceiling surface from the old coating.
2. Even if there are no signs of mold on it, carry out an anti-mold surface treatment using special compounds or ordinary 9% vinegar.
3. Seal all existing cracks and cracks, and then level the ceiling with putty.

Advice. To level the ceiling, use a moisture-resistant putty.

1. After the putty has dried, go over the surface with a sandpaper, removing all irregularities, and prime the ceiling in the bathroom again - which primer is better to use depends on the type of paint. It is best to purchase paint and primer from the same manufacturer.
2. To give the paint the desired shade, add color to it and mix well, then paint the ceiling with a brush, roller or spray gun.

For reference. Now many stores offer a free tinting service using special equipment. This method is much more reliable, since when mixing paint by hand, it is difficult to obtain the desired shade.

1. After 2-3 hours (paint drying time), paint the ceiling again, applying the paint in a perpendicular direction.

trimmed quality paint the ceiling can be washed without fear of damaging the coating.

Ceiling decoration with polystyrene tiles

To be honest, when answering the question of what kind of ceiling to make in the bathroom, we would not recommend finishing it with this material. Not because it does not meet the requirements for wet rooms, but simply because such a finish looks too simple and unpretentious (see).

But with a lack of funds or as a temporary option (for example, in new houses that shrink), it is quite acceptable.

The main advantage of polystyrene foam boards is that they do not need to perfectly align the base ceiling. But mold removal is a must. However, as before any other type of finish.
The tile is glued on liquid nails or other universal adhesive on a dust-free surface.

Suspended ceiling made of plastic panels

This type of finish and all that will be described below affect the height of the room. Therefore, when planning to make a ceiling in the bathroom, consider this feature. suspended ceilings.

1. After processing the ceiling, it is necessary to determine the level to which it should fall, and make a frame from a dry wooden beam or a galvanized profile.

Attention! The beam must first be treated with a special impregnation to protect it from moisture.

1. The framework for plastic panels represents the guides located parallel to each other and perpendicular to the direction of fastening of panels. The distance between them is 50-60 cm.
2. After the frame is installed, electrical wiring is done for the fixtures, and all wires must be enclosed in a corrugated pipe.
3. Installation of panels starts from the wall, they are attached to the guides with self-tapping screws, and each subsequent panel is inserted into the groove of the previous one.

1. Holes for fixtures are cut in place during installation.

Advice. To visually compensate for the loss of height, use glossy PVC panels.

Needless to say, plastic, like galvanized profiles, are materials that are distinguished by excellent moisture resistance. Many people, when choosing a bathroom ceiling, stop at this option, even when there are funds for a more expensive finish.

Suspended ceilings from LSU

LSU (glass-magnesium sheet) - quite new and not familiar to everyone finishing material. It has all the advantages of moisture resistant drywall, but is flexible when dry, high strength and ease of processing.

Moisture-resistant drywall can also be used for finishing bathrooms, but if you choose which ceiling in the bathroom is better, then we would give preference to LSU.

Installation of LSU is no different from the installation of drywall. This requires a metal frame, as in the previous case, but reinforced with transverse inserts.

After cladding, the suspended ceiling is puttied, primed and painted in the manner described above.

Cassette and rack ceilings

If you choose the ceilings in the bathroom from the position self installation, then the choice will definitely fall on aluminum rack and cassette ceilings. The most difficult thing in this matter is to mount the frame according to the level. The lining itself does not require any effort: the slats simply snap into place on special guides, leaving no gaps.

Cassette ceilings (see) can be with an open or closed frame system. In the first case, the visible part of the frame performs a decorative function, in the second, it is hidden behind the surface of metal cassettes. And in each case, the installation of cassettes occurs without the use of special fasteners.

Aluminum is a moisture-resistant, lightweight, non-corrosive material, so it is difficult to find ceilings more suitable for a bathroom than these.

Stretch ceiling

No matter how we convince the adherents of stretch ceilings, painting modern materials and telling them what kind of ceiling to make in the bathroom, it is unlikely that they will be able to convince them. And this is understandable: it is difficult to find a more optimal combination of quality, beauty, durability, ease of care and cost.

Everyone knows the main advantage of such a ceiling finish in the bathroom - neither the ceiling itself, nor the bathroom, nor the apartment will suffer from a leak from above. By carefully releasing the water, you can no longer remember the problem.

Conclusion

You have learned enough about the bathroom ceiling - which is better to choose a finishing method, how they differ, what disadvantages and advantages they have. Take a look at your ceiling, evaluate your strengths and capabilities, imagine how it will become after finishing. And make a decision.

Vladimir from Chita asks:

What are bathroom ceilings made of and what is the best ceiling for a bathroom?

It can be quite difficult to make a ceiling in the bathroom, and the point is not only in its installation, but also in the choice of material for it.

A bathroom is a room where humidity is always high, so not every material is suitable for finishing the ceiling of a room.

For this reason, many are wondering what kind of material better fit for the ceiling in the bathroom.

What should be the ceiling in the bathroom

When choosing what material to make the ceiling in the room, you need to consider specifications selected materials.
Any ceiling in the bathroom must meet the following requirements:

• moisture resistance. The surface must not pass moisture;
• durability. It is unlikely that anyone will want to change the coating every year;
• aesthetics. The surface in the room should be in harmony with the situation, be part of the overall interior;
• ability to withstand high temperatures;
• security. The materials used for their manufacture should not pose a threat to humans;
• resistance to corrosion;
• fire resistance;
• environmental friendliness;
• possibility of installation in a small-sized room;
• the ability to install built-in elements;
• affordable price.

Based on these characteristics, you can choose which ceiling can be made in the bathroom.

Budget options for ceilings in the bathroom

1. Whitewash. It is an old and long-proven way of finishing.

Advantages:

• minimum costs;
• ease of application.

Disadvantages:

• fragility;
• does not have moisture resistance;
• it is impossible to embed lighting elements in such a ceiling;
• whitewashing in the bathroom will look quite modest.

It is also worth considering that it is possible to whitewash the surface only after carefully leveling its surface.

1. Painting. Another budget type of finish, but also not the best.

Advantages:

• affordable price;
• ease of application;
• the possibility of combining colors;
• easy to care for.

Disadvantages:

• the need to level the surface;
• short service life;
• darkens with time (absorbs dirt);
• communications cannot be hidden;
• mold and mildew may occur.

If you make the ceiling just like that, then you need to consider that not every paint is suitable for painting. Need to buy acrylic paint high quality water based.

1. Vinyl wallpapers. For such a room finish, the surface must first be prepared, all irregularities and defects removed.

Advantages:

• the ability to recolor wallpaper;
• moisture resistance. The wallpaper is covered with a synthetic film, which prevents the penetration of moisture under them;
• easy to care for.

Disadvantages:

• cannot withstand strong temperature fluctuations.

Popular ways to finish ceilings

The ceiling can be made from other materials that meet the above specifications.

Polystyrene tiles

From this material you can make an interesting ceiling in the bathroom.

Advantages:

• moisture resistance;
• excellent thermal insulation;
• good sound insulation;
• small weight of the product;
• affordable cost;
• No base coat required.

Besides, construction market offers the consumer a wide range of tiles of various textures and colors.

Ceramic tile

This finishing material for the toilet room is in great demand.

Advantages:

• fire resistance;
• moisture resistance;
• security;
• environmental friendliness;
• resistance to temperature fluctuations.

Disadvantages:

• complexity of installation;
• lighting fixtures are not allowed.

PVC panels

Many consumers make ceilings from plastic panels.

Pros:

• moisture resistance;
• strength;
• aesthetics;
• do not require additional finishing;
• ease of care;
• ease of installation.

Minuses:

• dirt accumulates at the joints of the panels over time, which spoils appearance designs. PVC panels need periodic cleaning. But if there are problems with ventilation system, then it is likely that a fungus will appear at the joints;
• with high humidity in the bathroom metal carcass may suffer from corrosion. In some cases, even a galvanized coating does not save the situation;
• difficult to dismantle such a structure.

Siding

It was originally used as a material for exterior finish, however, over time, they began to make cladding in the bathroom from siding.

Make the ceiling sanitary roomfrom siding, you can because it:

• does not affect temperature fluctuations;
• has fire resistance;
• does not fade with time;
• environmentally friendly;
• easy on the move;
• hides defects and surface differences;
• available at a cost;
• does not allow the development of mold and fungal spores.

If you need to make a high-quality ceiling at an affordable price, then you don’t need to think about what or what to make, because siding is the best option in terms of cost-quality ratio.

Suspended ceiling options

A feature of such products is the fastening of the material to the frame. wooden bars it is better not to use for such a frame, as they can quickly decompose under the influence of moisture.

rack ceiling

Rails of this design can be made of different materials, but in the bathroom it is better to do ceiling made of aluminum or steel slats, because:

• such designs are water resistant;
• resistant to corrosion;
• have a variety of colors;
• easy to assemble;
• easy to care for.

A feature of rack products is their flexibility. Thanks to this, you can make the room curvilinear. In addition, the surface of the rails is polished so that the finished structure looks almost like a mirror.

However, if it was decided to make just such a design, you need to know which She has a disadvantage, namely:

• interpanel seams are clogged with dirt, so it is better to clean them often;
• rack design does not fit into every interior.

Drywall

For the toilet room today you can purchase such drywall sheets, using which you can install the ceiling and hide the wiring in them.

Advantages:

• environmental friendliness;
• increased moisture resistance;
• the simplicity of the device.

To install such a structure, you need to use a metal frame. After its installation, you can "sew up" sheets of drywall. It must be moisture resistant (be labeled GKLV).

Sheets of such drywall, as a rule, are green. If you know what material to buy, then problems with finished construction will not occur.

The disadvantages of gypsum structures are:

• complex installation;
• the need for periodic tinting of the structure.

chipboard panels

You can make such a ceiling in a room that is well ventilated and where high-quality ventilation is equipped.

Advantages:

• ease in the device;
• aesthetics;
• moisture resistance;
• in wooden ceiling you can install spotlights.

Expensive, but interesting ceiling options

Recently, when the question arises, which ceiling is better to do, some consumers choose the original options.

Tension surfaces

Such ceiling coverings have a perfectly flat surface without seams. For their production, special elastic materials are used, the basis of which is vinyl. Their undeniable advantages over competitors are:

• excellent performance;
• long service life;
• resistance to corrosion;
• protection from various insects;
• waterproof.

Of the obvious shortcomings can be identified:

• high cost;
• complex installation.

The elasticity of these structures is such that 1 sq.m of the product is able to withstand about 100 liters of liquid.

If you look from the decorative side, then the best suspended ceiling is a stretch ceiling.

After all, competitors do not have such a variety of textures and colors as his.

To visually expand the territory of the bathroom, you can choose a glossy surface.

Designers believe that this option is the best.

Also, the canvases can be matte or satin, outwardly similar to having a perfect surface.

Combinations of matte and glossy surfaces can often be used.

Mirror surface

Structures of this type are suspended structures to which mirrors must be attached. Thus, it is possible to visually expand the space, the room becomes lighter.

Using mirror panels, you can create exclusive design.The color range of products is:

• malachite;
• bronze;
• turquoise;
• steel;
• pink.

A combination of several shades is also possible.

Peculiarities:

• aesthetics;
• moisture resistance;
• functionality;
• the simplicity of the device.

Such surfaces are best done in a small bathroom.

Glass surfaces

Are practical solution for the device of ceilings in bathrooms. They have a number of advantages:

• easy to clean from condensate;
• resistant to moisture;
• not afraid of high temperatures;
• do not contain toxic substances;
• environmentally friendly;
• individual plates are easily replaced.

Disadvantages:

• difficult to mount;
• the frame is not resistant to corrosion;
• high price;
• difficult to care for.

If the question arises, which ceiling to make in toilet room to expand the space, you can use glass plates. They have a matte or glossy surface, varying degrees of transparency.

Based on personal preferences, you can apply some pattern to the glass surface or make an original lining.

There are many options for installing ceilings, and everyone chooses what to make them from, based on their capabilities and preferences.

/ How and from what to make a ceiling in the shower?

How and from what to make a ceiling in the shower?

Floor finishing can be done different ways, depending on what specific room is to be designed. Special attention deserves the repair of ceilings in wet areas, such as bathrooms and showers. It will require the most water-resistant coatings, since not only moisture from the air, but also just drops of water will get on the ceiling in the shower room.

What will fit

A lot will depend on the type of building in which the decoration is made. For example, the ceiling in the shower ordinary apartment or at home it is done with standard moisture-resistant coatings, and in the bath you will also need to use their heat-resistant varieties, since the air temperature here can be high even in washing department. In general, the best options would be:

• Panels and structures made of plastic or metal. Moreover, the first ones are suitable for ordinary premises, and it is better to use metal parts where high temperatures are possible, since plastic can be deformed.
• The same can be said about PVC films - such stretch ceiling will become great solution for a bathroom or shower room in an apartment, but not suitable for finishing baths.
• Simple painting with water-resistant coatings. This is an extremely budget solution if plane alignment is not required.
• Waterproof construction. Here you need to pay special attention to the distance to the plane of the ceiling, since even its waterproof variety does not tolerate a direct hit of water.
• . Few people think about such a design of the bathroom, and even more so - a room with a shower.

Panels

The main nuance of using this design will be to reduce the height of the room. For mounting panel structures you will need to assemble a special frame or crate on which the coating will hold. Therefore, the height of the walls will decrease by the dimensions of this frame. In addition, there will be a clearly distinguishable geometric pattern on the surface, formed by the joints of adjacent parts.

Stretch fabric

The film will definitely not the best option for registration of washing in baths. Under the influence of high temperature, it may sag or wrinkles may form on the plane. In addition, this building is heated only at those moments when the bath itself is heated, and in winter time year, if it is not heated, it can be very cold here, which will adversely affect the appearance of the PVC film. For standard apartments or private houses tension structures can be an ideal solution for decorating bathrooms, besides, they are also too expensive.

Painting

In order to use this method of repairing floors, it is necessary that they be very even initially. In this case, painting will be the most inexpensive way to give a shower beautiful view. If the overlaps are not too smooth or have noticeable defects on the surface, they will have to be leveled, which is very expensive if you hire a master and quite a long time if you do everything yourself.

GKL

A great way to make your bathroom ceilings even and beautiful, but that requires some sacrifice. Basically, you will have to sacrifice the height of the walls. Another nuance is moisture. Even a special type of drywall may not withstand constant contact with water and warp. Therefore, any structures made of it must be additionally protected with an appropriate primer and painted with special paints.

Cork

Pretty pretty and versatile. It can be glued to any surface, including those exposed to moisture. There are two nuances: the appearance of the plates should match the rest of the design, the premises and the cork cloth should be glued with waterproof glue. In addition, with the constant ingress of drops on the surface of the cork, dark spots and stains can form. To avoid this, you need to choose a laminated variety of cork boards. They are well protected from external influences by a thin film layer on the outer surface.

Repair in the shower room is a rather time-consuming and costly process. In addition to installing plumbing, floor and wall finishing, you need to pay attention to the ceiling. How to make a ceiling in the bathroom with your own hands? This question is asked by many. However, only an experienced specialist can give the correct answer, since the choice of material will depend on various parameters.

Today, few people think about finishing the ceiling in the shower. Although the room is an important and indispensable part overall design premises. Currently, there are several ways to design. The relatively limited choice is based on the difficult operating conditions of the premises. High humidity, temperature extremes, steam and condensate - this is only part of the obstacles that the finishing material will face.

There is a way out of this situation and not one! A high-quality ceiling in the bathroom with your own hands is a reality. However, first you need to scrupulously approach the issue of selecting raw materials, consult with experts, and also decide on the installation steps. Repairs must be carried out correctly, taking into account all the complexities of the shower room. In addition, it is necessary to decide in advance on the choice of material.

Ordinary

The standard choice of ceiling covering is no finish. During the repair in the bathroom, a large amount of work is carried out and there is not always a desire, opportunity or means to decorate the ceiling. In this case, it is usually leveled, whitewashed or carefully painted over. It looks quite fresh and stylish depending on the chosen shower room interior. Advantages:

• no costs;
• fresh appearance;
• finishing speed.

In addition, such a coating is easily repaired in case of damage or flood from the upper floors. In addition, it will not be as pitiful as, for example, expensive options, and restoring the original appearance is quite easy and not expensive. In maintenance, such a ceiling is very unpretentious, you do not need to think about the choice of design and type of installation. Disadvantages:

1. fragility;
2. lack of a presentable appearance;
3. all surface imperfections are visible.

Need to know! In order to hide the unevenness of the ceiling and save money, it is best to lay moisture resistant drywall.

tension material

Installing a stretch ceiling in the bathroom is easy and fast. This material will give originality to the shower room, as well as emphasize the dignity of the room. From the name it follows that the design takes place according to the technology of tensioning a special fabric made of fabric or plastic. The last option is by far the most relevant for the bathroom.

Advantages:

• Saves the height of the space.
• Installation of any kind of lighting.
• Perfectly flat surface.
• Aesthetics.

Installation of the product is carried out using special equipment, which allows installation in a short time. Specialists carry out the laying of the material with high quality, however, it is impossible to repeat the procedure on your own, especially without the appropriate tool. Besides, tension types have a number of other disadvantages. Weak sides:

1. high price;
2. weak strength;
3. melting possibility.

Plastic decorative panels

Properly carried out repairs will not only turn the shower room into an attractive room, but will also provide an opportunity to significantly reduce budget costs. Installation with plastic panels can be done independently. The following criteria can be attributed to the advantages of the material:

• low cost;
• attractive appearance;
• possibility of installation various kinds lighting.

Products are attached to each other with special fasteners that have a secure grip. By appearance, we can say that the joints are not particularly noticeable or look quite organic. Besides, plastic materials for repairs, as well as consumables are characterized by an inexpensive price. However, in addition to the positive aspects, there are also negative ones. For example:

1. Possibility of deformation during transportation.
2. Poor assembly makes the seams more visible.

Self-assembly from plastic

Do-it-yourself installation of plastic panels in the shower room is considered to be the simplest of all. Other materials require special tools, as well as some skills and dexterity. AT this case Absolutely anyone can handle a bathroom renovation. In order to correctly install the panels, you must:

After completing the stages of work, you can proceed directly to the repair of the wall itself - finishing with shower plastic panels.

rack frame

Suspended slatted ceilings are a structure in the form of aluminum elements attached to stingers, which, in turn, are installed parallel to each other on the ceiling. The distance between the stingers should not exceed a gap of 0.4–1.2 m. They are equipped with a special mechanism like a spring that allows you to level the products on one level.

Self-tapping screws, these elements are installed to ceiling, after which alignment is carried out along a vertical plane. Only after completing this stage of repair to the end, you can proceed to the next step - the installation of rails. It is necessary to choose a product that will be the first or last in the design, and then install it 30 mm shorter than the length of the ceiling itself.

There is a concern that the batten needs to be shortened, as it is not always possible to hit exactly the length of the batten in accordance with the length of the ceiling. Circumcision occurs with a sharp knife and very carefully, otherwise the workpiece may be deformed. The intended segment is best divided into smaller sections, make an incision with a knife and break them off one by one. After that, the rail is installed in the end profile and fixed to the ceiling.

Drywall

To date, the sheets has a stable popularity. In residential areas, it is able to bring a touch of style and practicality. To start the repair, you need to choose a moisture-resistant material. After that, the height level of the room where the ceiling will be installed is determined. Consideration should be given to the space for lighting and wiring - this is approximately a distance of 10 cm.

Having marked the zero level, a guide profile is attached with dowels. The gaps between the dowels should not exceed 0.5 m. Ceiling profile fastened at a distance of 35-40 cm and fixed with peppered inserts. When fitting the material, you need to make a cut, and then break the first layer, and then the second. The resulting cut is cleaned with a planer.

Video instruction

Or the apartment does not have any strict restrictions, therefore, which ceiling is better to make in the bathroom can only be decided by the person who lives in this territory. Nevertheless, the choice is always connected with something, and in this case, you will have to take into account the increased humidity of the room, the overall interior, the complexity of the work, the cost of materials, and, of course, personal preferences. I want to say that the options proposed in this article have been tested personal experience and have been successfully operated for more than a decade since cosmetic repairs or without it.

What ceilings can be done in the bathroom

In this case, the choice is quite large, although there are restrictions due to high humidity, but this almost does not affect the number of options - some nuances are simply added during installation and operation. Listed below are the most common rough and face finishing methods.

Overlay finishes:

• Plastering of floors with conventional mineral or polymer putties for painting.
• Plastering of ceilings with decorative mixtures for painting.
• Plastering ceilings with cement putty for leveling under facing with ceramic, polystyrene or vinyl (PVC) tiles.

Suspended (frame) ceilings:

• Stretch glossy, satin or frosted ceilings from PVC.
• Finishing with glossy plastic panels.
• Rack ceilings.
• Suspended plasterboard ceilings*

*Explanations. Gypsum plasterboard suspended ceilings are installed as a leveling basis for further fine finishing. It can be putty for painting, decorative plaster, ceramic, polystyrene foam or vinyl tiles.

Floor plastering

Beacon ceiling plaster is a very common way to level floors.

For low bathrooms, the option of leveling the ceilings of the lighthouse is most often chosen. Judge for yourself - if the height of the draft ceiling is not more than 250 cm, and sometimes less than that, then reduce this parameter suspended structure not that wrong, but somehow not quite aesthetically pleasing. Leveling the plane of plaster or cement plaster will reduce the height of the room from the lowest point by no more than 10 mm. So in this regard, this method of finishing is the most acceptable.

If the alignment is done for painting, this means that mineral mixtures (gypsum and cement compositions) can be used. In addition, leveling with finishing putty (gypsum or polymer) is still to be done, but this layer will turn out to be no more than 1-2 mm. On any mineral plaster, you can glue both polystyrene foam and vinyl tiles. But in the case when a front tile finish is provided, then only cement putties can be used for plastering, since when installing ceramics on plaster base a cohesion process will occur, that is, the tile adhesive will simply tear out the gypsum surface.

Stretch ceilings for the bathroom

Stretch glossy ceilings harmonize perfectly with ceramic tiles

In 99% of cases, if a stretch ceiling is chosen for finishing the bathroom, glossy PVC is preferred, and this is no accident. The fact is that bathrooms usually do not differ large area especially in apartments multi-storey buildings, and gloss has a mirror effect, reflecting all the details of the interior, which visually enlarges the room. Color design PVC mainly depends on the color of the ceramic tiles that line the walls and floor, as well as on the personal preferences of the owner of the house or apartment. The height of the ceiling is calculated taking into account recessed fixtures (the length of their hidden part).

Two-level figured ceiling in the bathroom

If the height and area of ​​\u200b\u200bthe room allows, then you can make a figured suspended ceiling. In such cases, the lower tier is always made of drywall, and the upper tier is made of PVC film inserts, as in the top photo, although this is not the only material solution (sometimes PVC is dispensed with. It should be noted that it is better not to lower the tiers below 240 cm from the floor, in otherwise, the room will not look very attractive from an aesthetic point of view.It is very easy to wipe or wash the PVC film, although it is extremely rare to do this, since all the "dirt" on the ceiling is alkaline-salt deposits after the evaporation of condensate.Watch the video clip , which is below and you will certainly approve of this option.

A selection of ideas for stretch ceilings in the bathroom

PVC panel ceilings

Ceiling made of plastic panels in the bathroom

Glossy PVC panels, just like the stretch ceiling, are in perfect harmony with the cladding. It turns out that such a finish also visually increases the volume of the room due to the reflection of the interior. In addition, PVC glossy lining is not only different color, but can mimic such Construction Materials like wood, stone, marble, sand and even ceramic tiles.

Installation of plastic panels in the bathroom on a wooden crate

mount plastic panels can be either on wood or on metal crate- this does not affect the technology in any way, since the area is small and the panels are very light, so make the frame out of whatever you want, without hesitation. In some cases, waterproofing is installed, for example, on a wooden or clay ceiling, and this does not have to be polyethylene film. For example, the top photo shows that the rough floor is insulated with penofol - foil PPE (polyethylene foam). Here, as if two birds with one stone were killed at once - and the heat can be preserved and the condensate will not reach the base.

Slatted ceilings

Slatted ceiling with inserts in the bathroom

Slatted panels can be made of polyvinyl chloride (PVC), steel or aluminum, although it is almost impossible for a visually inexperienced person to determine. In appearance, they are very similar to plastic, but at the same time they differ in technique and installation technology, albeit slightly. Some slatted panels are mounted with inserts, as in the photo above, that is, there is a gap between them, which is covered with a thin bar (this can be seen quite well in the image). But there are also such rails that are mounted without a gap, butt-to-butt.

Installation of crates for rails from stringers

In this case, for the installation of panels, a crate is also needed, but it is somewhat different from the same frame for PVC lining or drywall, but not by the principle of assembly, but by the configuration of the profiles. Here, instead of a smooth profile, a stringer is used - this is such a guide with cutouts (locks) in which the panel snaps into place. But in this case, the facing is monophonic - glossy, matte, golden, silver, and the like.

Suspended plasterboard ceiling

single level plasterboard ceiling In bathroom

The plasterboard ceiling has very wide possibilities, since, in fact, it is the same beacon plaster, only dry, and at the same time there is a bosom where you can hide communications (pipelines, cables in corrugations and without them), mount recessed lamps. In addition, GKL can be finished with finishing putty and decorative plaster for painting, as well as tiled with ceramic, polystyrene foam or vinyl tiles.

In this case, the question of which ceiling is better to make in the bathroom will have to be considered from a qualitative perspective. Let me explain. If drywall is designed for puttying with painting or, then ceiling sheets are used and if European manufacturers have a thickness between 8-9.5 mm, then GKL made in China has 6.5 mm, although I do not see this as a particular problem. Another thing is if it is planned to finish the ceiling with ceramic tiles - the mass of tiles and tile adhesive is too much for thin sheets, therefore, in such cases, a moisture-resistant version (GKLV) with a thickness of 12.5 mm is used.

Installation of ceiling lathing under drywall

As a ceiling lathing for plasterboard sheets, only galvanized structures from CD and UD profiles are used, and without options - wooden slats can't be used here! But if you are planning to make a two-level or even figured ceiling, then in this case it is allowed to use CW and UW profiles. Full version installation can be viewed in the articles "" and "" located on this resource.

Note. More than once I have heard that only moisture-resistant drywall should be chosen for the bathroom, but this, alas, is not so. GKLV is needed only for ceramic tiles, but even here, as an exception, even Chinese GKL 6.5 mm can be used, although, of course. you have to thin the adhesive layer.

Bathroom False Ceiling Ideas

Some features of finishing on plaster and plasterboard

Putty plasterboard ceiling

If the plaster layer finishing putty will be 1-2 mm, then 0.5-1 mm is enough for drywall, not taking into account the joints with the seam edge (there is a recess). Such a finish is needed for painting and it is used in about 50% of cases of all options! Perhaps this will seem too conservative to someone, although by and large I also think so, but here, in fact, a win-win option in terms of strength and design, for example, you can always paint it in any color, add or completely remove lighting devices. Yes, and the price is also inexpensive and depends mainly on the choice of putty, where gypsum is cheaper, but polymer (acrylic, silicate, latex, etc.) is much more expensive, but they are ready to use and are sold in the form of paste in buckets.

Note. You can also mention decorative plasters, although they are more commonly used as wall decoration. However, when creating unusual interior(VIP) in the bathroom, they can also be involved.

Beautiful ceiling decoration with foam tiles

Or polystyrene is the best suited for decorating the ceiling in the bathroom, and the only drawback in this case is the need to paint it with a spray gun. The problem is that the spraying of paint and varnish is accompanied by a cloud of micro drops that settle on the floor and walls, but ... Firstly, Painting works it can be done not only with a spray gun, but also with a brush or a small brush, and, secondly, in the bathroom such repairs will be required no more than once every 4-5 years. In addition, in rooms with small area The false ceiling can be glued directly onto the ceilings, having previously covered them with a primer, unless, of course, there are strong differences along the junction of the reinforced concrete panels.

Installing ceramic tiles on the ceiling is becoming more and more popular.

There is another option for facing a leveled ceiling surface - this is ceramic tiles, which are currently incredibly popular, although for some reason many do not dare to lay them on the ceiling. There may be several reasons for this, and here are two main ones: the first is conservative thinking and the second is the fear of doing work for technical reasons, or, more simply, because of doubts about one's skill. But, relying on my own many years of practice, I can say with confidence that both of these obstacles are most likely in our heads, and not in real space. So discard prejudices and fears, and as a result you will get a cladding that will not have to be repaired for decades.

Perhaps someone is confused by the cost of ceramic tiles, but I hasten to assure you that for square meter tiles you will have to pay the same amount as for the same area of ​​the stretch pvc ceiling. Of course, for one and the other material, prices will vary depending on its quality and the brand of the manufacturer, but ... PVC, as a rule, is given no more than 15 years of warranty (someone can even increase it to 20), but with ceramic tiles, this issue is not raised at all - it makes no sense. Operational resource of ceramics in vivo no one has figured it out yet, and you can use such a ceiling all your life, unless, of course, you want to change the interior.

Several nuances of ceiling lighting

Overhead lighting fixtures on the ceiling in the bathroom

I want to immediately draw your attention to the fact that lighting can be primary and secondary, that is, intended for a local area, for example, by a mirror, or performing decorative functions. Therefore, when buying such devices, it is very important to pay attention to their technical characteristics, where the lamp power is necessarily indicated. According to SNiP 23-05-95, one square meter of a bathroom needs 100 lumens (lm), which means that the lamps in general should have a power (W / m 2):

• halogen - 5;
• tungsten - 6.7;
• LED - 1.67.

For example, if your bath has 5 m 2, then the main lighting, excluding the secondary, depending on the lamps, in total should be:

• halogen - 25 W;
• tungsten - 33.5 W;
• LED - 8.35 W.

But, as you understand, these are the parameters that are necessary for safety and this is quite enough to wash, take a bath or wash in the shower. But for the same shaving, this may not be enough, so you will either have to install a sconce by the mirror, or increase the power of the main lighting, although in most cases they tend to the first option.

Well, you have learned about the most popular options, but which ceiling is better to make in the bathroom you will have to decide on your own. The most important thing is that the cost or the “coolness” of the finish should not be in the foreground - keep in mind that in many cases modesty decorates! But if you suddenly doubt your design abilities or aesthetic tastes, you can always ask friends or good acquaintances for advice, although, of course, you can also pay for the services of a professional designer.