How to glue baguettes on liquid nails. How to glue baguettes on the ceiling with a "nerd" assistant? How to glue ceiling moldings

Baguettes visually look like skirting boards and are used to decorate the joints of walls and ceilings. Can have different forms, colors, finishes and glued end-to-end or on wallpaper. They are easy to paint with water-based paint, depending on design tasks. Various creation options style decisions a lot, you just need to choose the right baguette, as well as pick up good glue and carefully fix the products on the ceiling and wall.

How to glue baguettes on the ceiling

Work begins with leveling the surface. Walls and ceilings with defects are carefully puttied, after which a primer is applied.

Start gluing the baguette from the corner. The end of the baguette is cut at an angle of 45 degrees to get a smooth, neat joint.

Glue is applied in an even layer along the entire length, as well as on cut corners. Next, the product is applied to the surface and pressed tightly.

How to glue baguettes on the ceiling?

The cut corners must match exactly to form an angle. The joints are also carefully glued.

Question: glue baguettes in the corners

The masters answer - when connecting the parts of the plinth end-to-end, it is necessary to add glue and carefully press it against the wall in order to squeeze out the remnants of the adhesive. It is better to press down with the edge of the palm so that there are no dents from the fingers. Residual glue is removed with a damp cloth.

How to glue baguettes on putty

How to glue baguettes on putty

The option of gluing a baguette to putty is often used, especially by professionals. Work begins with a thorough preparation of the ceiling and walls, which are leveled with putty. Next, with the help of a miter box, the ends are cut.

The baguette is fixed with glue, for example, it can be Cosmofen plastic glue, or the same putty, it rubs all the cracks between the wall, ceiling and baguettes. Excess material is removed with a clean cloth. You need to finish the work until the putty is completely dry.

The next step is priming the surface, painting in desired color. It is worth remembering that painting in the same color as the ceiling will help create a visually unified design.

After that, you can begin to glue the wallpaper, the remnants of the overlap of the upper part of the wallpaper on the baguette are pressed with a spatula and cut off with a clerical knife.

The advantage of this method is that you can safely carry out staining without fear of damaging the wallpaper.

How to glue baguettes on wallpaper

We glue baguettes on wallpaper

This method is used when wallpaper is already pasted and baguettes need to be fixed on top. V this case the order of work is as follows:

• first, the ends must be cut with a miter box,
• then apply a thin layer of glue to the surfaces of the wall and ceiling,
• attach a baguette to the wall,
• press it down and hold for the time specified in the instructions,
• remove excess glue with a napkin,
• seal the joints with sealant,
• the surface is painted with acrylic or water-based paint.

It is very important to be careful when staining. so as not to hurt the wallpaper, or even better, paint the baguette even before starting its installation.

For those who are interested in how to glue a baguette on wallpaper. you should know that using this method, you do not have to adjust the wallpaper, and if there were distortions or burrs, they will be hidden under the baguette.

Glue for baguettes

Modern baguettes are most often made not from gypsum, which is difficult to glue, but from foam. It is lightweight, easy to cut, transport and stick. Masters use acrylic, putty, as well as special adhesives for polystyrene.

The most common choice of glue for baguettes is liquid nails. They perfectly fasten with concrete, quickly seize and over time, the baguette does not move away from the ceiling. Produced in cans. It is applied using a special mounting gun, which allows you to carefully apply glue in inconvenient places with minimal excess.

Acrylic glue - is water-soluble, well fastens not only polystyrene, but also parquet, cork, parquet board, drywall.

If putty remains after finishing the walls, you can use it. Fine-grained is best finishing putty, which is easily removed with a damp cloth, resulting in a smooth seam.

Also used are transparent adhesives for polyurethane, produced in tubes. They glue baguettes very securely, but you need to work quickly and accurately.

If the choice was made in favor of silicone sealants, it is worth knowing that after drying, paint them water-based paints will not work.

If you are in doubt about what to choose, you can ask for help from the sales assistant in the store building materials. He will select the composition based on the baguette material and your goals and objectives. A lot will depend on the quality of the glue, but you also need to work with it correctly, so do not forget to read the instructions before starting work.

1.Materials and tools

2. Gluing baguettes

Ceiling baguette serves not only to hide the gaps between the ceiling and walls, it is also decorative element capable of giving the repair a finished look. You can see how the surface of the ceiling with a ceiling plinth looks like in the photo. Many do not even think about how to glue baguettes to the ceiling.

How to stick a ceiling molding with your own hands

It seems to them such an easy task that they do not think about any of the nuances that exist in this work. But in order for the result to please for a long time, you should follow some rules.

Materials and tools

Before moving on to how to glue baguettes on the ceiling, you need to prepare the following materials and tools:

• hacksaw for metal;
• pencil;
• sponge;
• miter box;
• soap solution;
• sandpaper;
• level;
• tassel;
• glue or liquid nails.

As for how to glue baguettes to the ceiling, this can be done with both glue and liquid nails.

How to glue baguettes on the ceiling, in detail on the video:

Gluing baguettes

How to glue baguettes on the ceiling - secrets and subtleties

Very often, many of those who decide to carry out repairs at home with their own hands do not even realize that in the process of gluing baguettes there are important rules and requirements to be followed. However, do not think that only professionals will cope with this work. We will try to tell you about all the most important points so that you can manage on your own.

A baguette or ceiling plinth is not only an accessory that hides irregularities and gaps formed at the junction of the wall and ceiling. It is also a decorative element that adds a finishing touch to your space.

Baguette for wallpaper: how to glue correctly

Plinth can be made in different colors and shapes, have different textures and finishes. They are easily painted with a water-based emulsion, it all depends on the tasks. Exists great amount style decisions that you can bring to life with the help of baguettes. All you need is to choose a ceiling plinth that matches the style, good glue and carefully glue this decor element.

Types of baguettes

Types of ceiling moldings

All these products can be divided into two types:

The difference between them is as follows: the wall is glued in one plane, it is installed both on the walls and on the ceilings, they can also decorate the outer corners, make a frame for the panel, etc.; and the ceiling is glued in two planes, it is often used only when finishing the junction of the wall and ceiling.

Tip: if you decide to glue the plinth yourself, you should not choose products with intricate patterns. They are difficult to join and putty. Believe me, a simple baguette, neatly glued, will look much better. And also we advise you to choose a ceiling plinth not less than 5 cm wide. Its installation will be much easier.

Gluing process

What you need to stock up before work:

• liquid nails or glue;
• tassel;
• construction knife;
• pencil;
• miter box;
• clean rag or sponge;
• finishing putty;
• putty knife.

The process of gluing a ceiling baguette

So, how to glue baguettes on the ceiling? Professionals advise the following course of action:

1. The whole process should start with leveling the surface. If the ceiling and walls have irregularities, they must be puttied. After that, apply a primer.
2. Gluing baguettes starts from the corner. Ending ceiling plinth must be cut at a 45 degree angle. Thus, you will get a smooth and neat joint.
3. Apply glue along the entire length of the product in an even layer. Don't forget to glue the cut corners.
4. Attach the product to the surface to be glued, press firmly. If you made the cuts correctly, then the corners will clearly match and form an angle.
5. The installation is over, and the glue has dried, you can start painting.

Many people have difficulties in decorating corners, so here we would like to dwell in more detail. Experts say that when joining two parts of the ceiling plinth end-to-end, it is necessary to carefully work out the edges with glue and press the parts tightly to squeeze out the remaining glue, which should be removed with a napkin. Press down not with your fingers, but with the edge of your palm, so you do not leave dents from your fingers.

Sticker baguettes on putty

Gluing baguettes on putty

Specialists have to perform such work as installing a baseboard on putty. Work should begin by leveling the surface of the walls and ceiling. Then cut the ends with a miter box.

The baguette is put on glue and putty, and all unwanted cracks are covered with putty. If excess material appears, they must be removed with a napkin or a clean cloth. Naturally, the work must be completed before the putty dries.

After the baguette is glued, you can start wallpapering. If there is an overlap of wallpaper on the ceiling plinth, then the wallpaper is pressed with a spatula to the joint with the baguette and carefully cut off with a clerical knife. The advantage of gluing wallpaper after installing the baguettes is that you can safely paint the ceiling plinth without fear of staining the wallpaper.

How to glue baguettes over wallpaper

Ceiling baguette over wallpaper

Specialists also have to deal with this method when the wallpaper is already pasted and there is no need to change them. In this case, the work plan looks like this:

1. Trim the ends with a miter box.
2. Apply a thin layer of glue to the ceiling and walls.
3. We attach the ceiling plinth to the wall.
4. We press it down and hold it for the time specified in the instructions for the glue.
5. We remove excess glue with a napkin, cover the joints with sealant.
6. We carefully paint the baguette with paint, in some cases the baguette is painted before work begins so as not to stain the wallpaper.

Those who decide to use this method should know that in this case you will not need to adjust the wallpaper to fit the baguette.

In addition, if distortions occur during the wallpapering process, they will be hidden by the plinth.

We hope that we were able to answer most of the questions related to the ceiling cornice, and its installation will be easy and effortless for you!

How to stick a ceiling plinth

The most enjoyable stage repair work- pasting the walls with wallpaper and installing a ceiling plinth, as the room is already gaining comfort and the cherished moment of finishing the repair is approaching. In order for the molding to fully fulfill its practical (disguising the flaws of the ceiling-wall joint) and decorative (giving the room sophistication and special charm) functions, it must be properly glued.

Skirting board fixing methods

Before gluing the ceiling plinth, you need to decide on the method:

• Installation over wallpaper. The advantage is the ability to pick up a molding when you can already see a complete picture of the room, without being afraid to make a mistake with the design.
• Installation on walls, only prepared for wallpapering. Dignity - the absence of the likelihood of spoiling the fine finish in the process of attaching the curbs.

Fixing the ceiling plinth

Preparation for installation work

It is possible to glue the ceiling plinth only after it has been unpacked for a day. Therefore, after buying a baguette, there is at least a day to fully prepare for the installation process.

First of all, you need to purchase all the materials and tools that you may need:

• Glue or putty, depending on the chosen installation method.
• A miter box, a saw with a fine tooth and a construction knife, they will help to carefully make a gash at the junction of two baguettes with the desired external or internal angle.
• Spatula, rags and sponges, in order to remove excess glue and putty.
• Paint and brushes for painting the border.

Tools for mounting the ceiling plinth

If there is little or no experience in gluing a ceiling plinth, you need to practice sawing corners. Therefore, it is better to purchase an additional baguette and perform on it all types of corners that are available in the room.

The ceiling plinth should always be glued to a dry and clean surface, so the attachment point must be wiped with a dust cloth. If the baguette is attached to plastic surface, it must be degreased and wiped dry.

Choosing glue for fixing a baguette

Adhesive for ceiling molding

If you are going to glue the ceiling plinth before finishing, it is better to use a finishing putty or drywall adhesive mortar.

If the installation will be done on top of the wallpaper, you need a special glue. Here the choice becomes between 2 types: acrylic and polymer. Glue on water based(acrylic) is used in nurseries, bedrooms, halls and other rooms where safety and the absence of a pronounced smell are important. Polymer adhesives, such as "Moment" and "Titan", are recommended for use in rooms with high humidity.

Installation of skirting board before finishing

Installation of skirting board before finishing

1. The process of mounting the molding must begin with washing down the edges at the right angle. In order not to get confused, prepared baguettes can be laid out near the walls around the perimeter in those places where they will be attached under the ceiling. The connection points of the skirting board on a straight wall are already adjusted in place so that there are no large gaps. Therefore, you do not need to cut them immediately to size.
2. To make the corners perfect, it is better to adjust them without adhesive. We take two baguettes, sawn down under the desired degree and join in the corner. If the gap turns out to be large, we correct the joint by cutting off the excess with a knife. If the quality of the joint is satisfactory, we take a pencil and outline the places where the baguette fits to the wall and ceiling.
3. After everything corner connections prepared, it is necessary to dilute the mixture. There are 2 ways to prepare it:

• Stir the finishing putty with water until a homogeneous soft mass is formed, the excess of which will be squeezed out from under the baseboard. It is important that the mixture is like thick sour cream, but does not flow;
• Add putty and PVA glue to the water (proportion 1: 1: 1) and knead until a homogeneous mass is formed and leave for 2-3 minutes. The adhesive mixture is ready, you can get to work.

We glue the ceiling plinth starting from the corners. To do this, we evenly apply putty on both work surfaces and install the baguette along the previously drawn lines, pressing it along the entire length. We remove excess putty with a spatula, immediately rubbing the joints and wiping them damp cloth. The only case when it is necessary to apply glue or finishing putty on one surface is stretch ceiling(nothing can be glued to it).

In the same way, we paste the baguette on the other side of the corner and putty the joints to the walls and other moldings.

When all the corners are ready, proceed to the straight sections. We measure the desired size by attaching the plinth between the two already glued, cut off and fasten in the already known way.

After the putty dries, the molding is primed and painted.

Installation of plinth on wallpaper

Installation of plinth on wallpaper

The algorithm for attaching a baguette to wallpaper is the same as in the previous case. But there are some nuances:

• Glue is also applied to both surfaces of the baguette, but not evenly, but pointwise with a step of 3-4 cm or a narrow strip. There should be such an amount of glue that it holds the glued product well, but does not protrude when pressing on the molding. If it nevertheless appeared on the wallpaper, you should immediately wipe it with a dry sponge or cloth.
• After applying glue to the baseboard, you need to wait a little time (so that it grabs) and then stick it on the walls. If this is not done, you will have to stand for a long time, pressing the molding against the wall and ceiling, which is very inconvenient.
• It is more convenient to paint the skirting board before installing it, this eliminates the risk of paint getting on the wallpaper.

  How to glue baguettes on the ceiling

If the walls are uneven

Often you have to stick a baguette on not smooth walls with wallpaper, which causes large cracks and gaps. At the same time, wallpaper does not allow you to putty the joints and improve the look. To fix the situation, you need to take the sealant in the color of the molding (usually white) and carefully mask the joints. This should be done after the glue has completely dried.

Nothing makes the transition from the wall to the ceiling of a building more aesthetic than an exquisite frame made of aesthetically pleasing and practical plastic. The question of how to glue a plastic baguette is relevant and, if necessary, hide small imperfections after repair. The presence of such an interior detail opens additional features to improve the appearance of the room.

A plastic baguette is more practical than a wooden baguette. This material is easier to clean and keeps presentable longer. appearance without additional care. Plastic edging is much lighter in weight, so the installation of its design is technically easier. In addition, the price of plastic as a baguette material is significantly lower. This is especially important if ceiling frames are purchased for finishing office or public premises, and it is desirable to save on materials.

Stages and features of gluing plastic baguettes

The traditional technology for gluing a baguette frame for a ceiling includes several steps. This:

1. Preparing the surface for gluing.
2. Carrying out the necessary calculations.
3. Cut the desired length of the baguette blank.
4. Direct installation.

The technical nuances of baguette gluing may vary depending on the type of surface. If baguette frame glued to the wallpaper, it is necessary to apply a smaller amount of adhesive to avoid stains and softening of the wallpaper. When gluing under a stretch ceiling, it is best to attach the interior frame to the wall so as not to damage the delicate surface of the ceiling. Most practical option a baguette for most of these structures is a ceiling plinth.

In order for the baguette edging to hold securely and look flawless, installation must be performed correctly at all stages of work.

Surface preparation

The first step in gluing the baguette edging is to prepare the work surface. Before gluing the decorative panel, the surface must be well cleaned of dust, remnants of the old coating (paint, wallpaper, whitewash) and any gaps should be leveled with priming. In many cases, additional puttying is required.

The main task preparatory phase- increase in the bearing capacity of the surface on which the baguette panel will be held. Applying a coat of primer will greatly improve the adhesiveness, or adhesion. If you properly prepare the wall before gluing plastic baguettes, this will save a lot of adhesive consumption with excellent fixation of the frame.

Calculations and markup

If each corner of the working room is exactly 900, a standard cut with a miter box is sufficient.

How to stick baguettes on the ceiling yourself (video)

Markup work becomes more complicated if the task of the baguette panel is to hide the flaws of the room at the junction of the ceiling and walls. To make a calculation the right amount material and markings in a room with non-standard angles, it is necessary to attach a piece of baguette to the corner between the ceiling and the wall, and then draw lines along the bottom and top of the piece.

The main value to be guided by in this case is the intersection of solid lines along different sides angle. These places are indicated by marks on the baguette opposite the straight lines. The accuracy and aesthetics of the joints are important indicators of the quality of gluing.

Cut piece of baguette

To separate the desired part of the material for decorative panel, you can use a hacksaw for plastic or a knife with special blades.

After the necessary pieces are cut off, it is necessary to check the accuracy of the angle by folding two parts according to the marks drawn earlier (inner and outer corners). The slightest inaccuracy should be "smoothed out" sandpaper or a knife, otherwise a gap may form. Also suitable for this purpose electric jigsaw, especially when working with "curly", three-dimensional panels.

It is also possible to cut baguette blanks when fastening, but it is much more difficult, time-consuming and effort-consuming. Therefore, it is better to glue pieces that fit perfectly to each other, and not to engage in correction during installation.

Installation nuances

It is best to start gluing the baguette edging from the corners of the room - this is the basic and most painstaking work. Straight details required size much easier to stick. When applying glue to the edges of the blanks, it is necessary to ensure that its excess protrudes outward. The more uniform the layer of applied adhesive, the better the plastic will “grab”. The surplus that comes out is evenly distributed along the edges with a brush, and the remnants are washed off with warm water and soap or solvent.

When the panels are already glued, you need to pay attention to the processing of the joints. They are lightly puttied and polished with sandpaper. After grinding and drying of the glue, if necessary, you can paint the mounted baguette.

The choice of glue for the baguette panel

How to glue a plastic baguette selected from the rich collection of the ART-BAGET online store? Many experts recommend using "liquid nails" for this purpose - a special construction adhesive that is designed for any weight of parts. "Liquid nails" are made on a neoprene or water basis. This adhesive is universally compatible with different surfaces. It is preferable to apply it with a gun.

Other options are glue "Dragon", "Moment", Bostik Vinycol 1520, "Khimkontakt-Desmokol" based on organic resin, specially designed for soft plastic "Second Vinyl". Regardless of which adhesive you prefer, you need to avoid getting it on outer surface baguette.

Easy sticking and excellent results!

Which photo frame is better to buy →

I have a friend, an excellent scientist and economist, but he cannot drive a nail into the wall. Therefore, I was surprised when, in a telephone conversation, he asked how to glue the baguettes on the ceiling. Vadik builds Vacation home and periodically helps me and the team to do unskilled work. In the evening I went to see the state interior decoration and find out the reason for the interest in ceiling plinths.

Preparing walls and ceilings for wallpapering

The workers hired for interior decoration decided to cheat. A kind and somewhat absent-minded customer should not understand the intricacies of their profession. They were wrong. Vadik has an iron character. He loves smooth ceilings and walls, the right angles.

Having examined uneven surfaces without stripping and coating with a primer, I unloaded a baguette tool from the car:

• miter box for cutting skirting boards at an angle;
• spatulas 7 and 20 centimeters;
• cord and tracer for beating lines;
• gun with a bottle of glue for connecting the ends;
• mounting adhesive for polystyrene products.

It was necessary to start leveling and priming the walls. Otherwise, it will not work to glue the baguette correctly. I putty. Vadik primed and cleaned. In rooms where there is a stretch ceiling, it was first mounted. Tiled in the bathroom and kitchen.

Attention : Baguettes are glued to perfectly flat walls and ceilings, cleaned and coated with a primer.

We glue ceiling plinths for painting with an assistant

With a piece of ceiling plinth, I marked the size on the ceiling and walls. Then, with the help of a friend and a cord, he beat off the lines along which the baguette should lie. We used a simple foam plinth with longitudinal protrusions. It is easy to stick, no need to customize the pattern. We started from the corner. With the help of a miter box, the end was cut off at an angle of 45 O on one strip, then on the other, turning the plinth upside down with the bottom plane. Since the length was not enough for the entire wall, I immediately cut off the second end. The joint is better preserved and does not crack over time if cut obliquely. The bonding plane and deformation resistance increase.

The ceiling baguette is glued on two planes. You can lubricate them with putty, sealant. I prefer mounting adhesive. Styrofoam holds the composition for polystyrene foam products best.

I checked the correctness of the cut on the skirting boards in the corner, putting them dry in place. I applied glue with a spatula on both planes of the baguette. After that, I carefully attached it, focusing on the lines, in order to glue it correctly, and pressed it along the entire length. Then the second. The excess glue that came out was collected with a spatula. I entrusted the assistant to wipe the skirting boards with warm water in order to wash off everything superfluous with a sponge. If it dries out, it will be difficult to clean. On the next strips of the baguette, the ends were smeared with docking glue. The cylinder is loaded into a mounting gun. I applied a little on the foam and immediately removed the excess that came out. A friend with warm water followed me.

The work on sealing the joints is done with a rubber spatula so as not to harm the baseboard.

On the semi-column, I prepared pieces of a baguette with convex corners in advance. Marked the bottom edge. The ceiling plinth turned over, laying on the miter box. I checked that the direction of the cut was correct, the outer side is larger. Then he did everything the same.

The next day, when the baguette stuck and dried, I walked with putty around the corners and joints. I used to do this with a small rubber spatula without a handle. Then he repeated, and completed the processing with acrylic putty. At the outer corners, the foam was more difficult to fit. Every time the solution dried up, Vadik sanded it. A few days later, I instructed a friend to prime everything and started painting.

As a result, the “student” wrote down the order of work in his summary:

1. Make markings on the walls and ceiling.
2. Cut the baguette and check the correct angle.
3. Spread with glue.
4. Attach along the line and glue.
5. Wipe with water.
6. Putty joints and clean.

In the bathroom the walls are lined tiles. In order not to smear it, I painted over the ceiling baguette on the front side. Styrofoam cut out, laid on the floor and walked with a brush a few days before gluing. A little paint from this can left no tinting of joints and corners after stripping.

The tile has a hard glossy surface. The plane adjacent to the ceiling and smeared the ends mounting adhesive. On the bottom I applied a thin strip of sealant in the upper part. He did it with a pistol. It is very important that the sealant does not protrude beyond the edge of the baguette. From experience I know that the paint does not stick to it, it is impossible to clean it. To create a smooth transition, I pasted masking tape on the tile, under the very foam. Then I sealed the gap with acrylic white putty and removed the excess with a tile spatula, a corner with a radius of 2 mm.

Wall moldings are glued under stretch ceilings

Do-it-yourself wallpaper with a ceiling plinth

When it came to a room with a stretch ceiling, Vadik was afraid that we would not be able to glue the baguette correctly and not damage the thin film. I explained to him that flat wall moldings are used for this. They are glued only on a vertical plane. You can also mount a ceiling plinth. Then its upper part is tightly pressed against the dry ceiling. Glue is applied only to the bottom plane.

In order not to cut the stretch ceiling film with a knife, I carefully checked the cutting. Styrofoam is lightweight, it can be glued to wallpaper. Polyurethane is denser, has more specific gravity. It's not worth the risk. Should be cut upper part wallpaper along the line marking the edge of the baguette. Then clean the wall and primer. We prepared the rooms ourselves. I decided to glue, first the baseboard, and then the wallpaper. So it is more convenient to putty and clean the ends. The wall covering will not be affected.

We cut the baguettes, checked their joining seven times. Only after that I began to smear the baseboard and glue it to the wall. When marking, I tightly pressed the upper part to the stretch ceiling. Now I laid the trim strips along the line and double-checked the pressure on the film. Removed excess glue immediately. A friend confidently followed me with a sponge and wiped the ceiling baguette.

Before sealing the joints, I asked Vadik to bring newspapers. I put the sheets between the stretch ceiling and the upper plane of the plinth. Secured with pieces of adhesive tape to the film. Remove sticky tape residues properly with window cleaner.

Non-standard options for finishing stretch ceilings with skirting boards

My friend learned quickly and was creative in the process, he was fascinated by gluing a baguette. When we got to the living room, we bought LEDs and a massive ceiling plinth. We needed a wide baguette top. Having marked the line on the wall, we drew another one below. We decided to glue a baguette with a gap under the stretch ceiling. The LEDs were installed in a gap around the entire perimeter. The backlight visually raised the vault.

It is a pity that the rooms in the house are over. We had so many ideas, especially from a friend.

5 ways to perfectly paint the ceiling plinth

Finishing the ceiling surface almost always ends with the installation of a decorative plinth, which gives the room a finished and harmonious look. However, this part of the work requires compliance with a certain sequence and technology, especially in terms of the design of corners. In the article, we will look at how to glue baguettes on ceilings so that the repair turns out to be of high quality.

Features of using baguettes

In addition to the fact that baguettes on the ceiling allow you to harmoniously arrange the transition from the wall to the ceiling surface, they have a number of advantages, including:

• budget price;
• a wide range of sizes, shapes, configurations;
• the ability to use a decorative plinth with any type of ceiling finish;
• flexibility allows you to bypass irregularities on the walls and hide them;
• ease of installation.

Depending on the material from which they are made, you can choose the following types of products:

• foam and polyurethane;
• plastic;
• aluminum;
• gypsum
• wooden.

Ceiling plinths can be smooth or embossed, narrow and wide.

Before you start gluing the ceiling baguette, you need to decide what the products will be mounted on. Most often, compositions for polystyrene foam materials are used. But there are other alternatives on the market:

• putty is often used to glue two surfaces together. The main advantage is that it not only securely fixes the baseboard, but also allows you to immediately seal visible seams and transitions;
• liquid nails qualitatively fix the skirting board under the ceiling, providing instant adhesion of two surfaces;
• acrylic adhesive is used for mounting wooden skirting boards and a foam baguette;
• silicone sealants are also used to fasten the baguette, but they have a significant drawback - after installation, the exposed areas of silicone cannot be painted.

To make sure you have selected correct composition, read the information on the instructions for the glue. Typically, manufacturers indicate the type of material that a certain type of adhesive is suitable for.

In order to properly install the plinth, it is necessary to make markings on wall surface. You can skip this step if all corners in your room are strictly 90°. For large room work is better to start from the corners. Prepare a solution of water and soap, a small sponge and a spatula in advance.

The algorithm of actions will be as follows:

• apply a small amount of glue to the edge of the plinth with a spatula, carefully coat the joints of the elements;
• work carefully so that the glue does not get on the front side of the plinth;
• attach the baguette to the surface, press it firmly;
• immediately remove the adhesive that has come out with a sponge dipped in soapy water;
• after you paste over the entire perimeter of the ceiling with a plinth, seal the seams between the individual parts with putty.

We are talking about when the walls have already been finished with wallpaper, and on top of them you need to stick a baguette on the ceilings. In this case, the order would be:

• the ends of the plinth are cut with a miter box;
• the reverse side of the plank is smeared with glue;
• apply the product to the wall and, slightly pressing down, hold for as long as indicated on the package to the glue;
• excess glue is removed with a sponge;
• joints are sealed with a silicone-based sealant;
• if necessary, the plinth is painted with paint.

With this method, care must be taken not to damage the wallpaper. If it is planned to paint the baguette, it is better to do this before starting its installation.

In this case, the peculiarity of the work lies in the fact that first they glue the baguettes to the ceiling, with the help of a putty mixture they close up cracks and gaps, and after that they proceed to the finishing of wall surfaces. In this case, it is necessary to bypass the baguette gluing line very efficiently. Even the slightest flaws in the subsequent repair that were made in this place will become noticeable. If you are not confident in your abilities, then stick the baguettes on the ceilings after decorating the walls.

Docking the plinth in the corners is the most difficult stage of work associated with their installation.

Important! In order not to spoil the material, adjust the last straight bar to size after you stick the corner.

If all the corners in your room are strictly 90 °, the following recommendations will help you cut the baguette correctly:

• place the baguette in the miter box exactly as it will be located on the wall surface;
• press the lower part of the plinth firmly against the wall of the tool;
• miter box up the right sizes cut the parts of the fillets that will be joined at the corners;
• with help construction blade to the end, process the extreme sides of the parts;
• check the evenness of the joints by applying the elements to each other at right angles so that no burrs remain. Otherwise, gaps will occur at the installation site.

To glue baguettes in the corners of the room, proceed in the following sequence:

• cutting off the end of the products, attach the fillets to each other, check the place of their joining for gaps;
• cut the interfering areas with a knife;
• smear the skirting boards with glue, attach them to the wall surface. If the adhesive requires curing, wait the specified amount of time.

Ceiling polyurethane or plastic skirting boards usually have White color, so many people want to give a different shade to the baguettes, which will fit the style and design of the room. There are several other reasons why it becomes necessary to stain the glued skirting board:

• often on the surface of the baguette there are small defects in the form of scratches, dents, especially manifested in bright light;
• the loose structure of the material does not always look aesthetically pleasing. Skirting boards are easily painted, so this drawback can be successfully masked;
• over time, white fillets lose their original shade and turn yellow. Painting and decorating will easily eliminate this defect;
• applying a layer of paint will help hide the joints formed during the installation process;
• wooden baguettes are recommended to be coated with varnish or special impregnations. This will not only make them more attractive, but also extend their service life.

Before proceeding to painting work, you must choose suitable paint. For foam products, water-based emulsion and acrylic formulations are best suited.

If you want to do original interior, use the eyes - this is special paints, with the help of which it will be possible to obtain a different texture on the surface of the baguette - natural wood or stone, patina, gold, etc.

It is better to paint ceiling plinths before they are pasted. In this case, you can use not only conventional paints, which are applied with a brush, but also sprayers.

The paint is usually applied in two coats for best results. In this case, before applying the next layer, the previous one should dry well.

• measure the perimeter of the room:
• divide the resulting value by the standard length of one baguette (2 m);
• round the result up;
• add two or three more elements in case of an unforeseen event (damage during installation or transportation).

The variety of shapes and types of ceiling fillets often poses difficulties for buyers, then you need to choose the right product. After all, personal preferences do not always correspond to the chosen direction in the interior. In order not to make a mistake, pay attention to the following tips:

• for narrow and long rooms choose wider fillets;
• in a low room, a thin plinth under the ceiling will look better;
• minimalism will be emphasized by a modest white plinth; for lush interiors, pompous baguettes imitating stucco molding should be chosen;
• if the color of the plinth matches the shade of the walls, this will visually lengthen the room, match the color of the ceiling - the walls will become noticeably higher;
• As for the material, it all depends on your financial capabilities. The cheapest are foam and polyurethane skirting boards, the most expensive are wooden and aluminum baguettes. In any case, you can always paint the product in the desired color.

Correctly gluing a baguette to the ceiling is not difficult. The main thing is to study the features of the products before starting the installation and choose a reliable adhesive.

Related videos

With the help of a baguette, geometry is emphasized, which can be very diverse.

If earlier the joints between the walls and the ceiling were covered with a panel or a strip of embossed paper, now the curvature smooths out the baguette or baseboard better. It gives the room a unique look, hides some mistakes during repair work. This article will tell you how to glue baguettes, how to cut them and mount them in corners.

Features of use

Sticker. How to attach a baguette

When installing ceiling plinths, there are several of their advantages:

• Ceiling baguette hides visible defects:

1. small irregularities;
2. some roughness;
3. grade fluctuations.

• Decorates.
• Simple and easy to install, no special skills required.
• The material is lightweight and sometimes flexible.
• Wide design choice.
• Affordable price.

Tip: Before gluing, you need to know what are used to make them. various materials. Products come in different textures, widths, smooth or patterned. This affects the cost, purpose and application features for different interiors.

For the manufacture of molding, ceiling plinth or frieze, the following are used:

• Styrofoam.
• Gypsum.

The most popular products are made of foam and polyurethane. As for plastic products, they are used only for tension and PVC panel ceilings. Wooden baguettes - with a wooden structure device.

What glue is used for mounting

Before gluing ceiling baguettes, it is necessary to think about adhesive composition. For each master, during installation, there is a glue that has been tested in the work.

He can be:

• Polymeric. Such a composition has a weak adhesion. In order to glue a foam baguette with polymer glue, it will need to be held in the required position sufficiently long time, which is not very convenient for a two-meter product.
• Acrylic.
• Based on silicone.

Acrylic and silicone adhesives allow you to quickly and conveniently mount the ceiling plinth. They go on sale in tubes for a pistol. The composition is applied quite easily, and the diameter of the outlet nozzle controls its consumption.

How to glue a ceiling baguette with one or another composition, the attached to the material will tell you detailed instructions. The disadvantage of such adhesives is their high cost, this is especially noticeable when performing work in big apartment or home.

Note: The cheapest do-it-yourself gluing option is regular finishing putty or drywall adhesive if used during repairs. Such a composition is more reliable, hardens faster, which allows you to paint the ceiling and baguettes in half an hour, without fear of damaging them with a roller.

The disadvantage of using putty as an adhesive is the lack of convenience when working with it. Such building mixtures it is not very convenient to apply a thin layer on a baguette with a spatula.

After gluing, the remaining putty or drywall adhesive will need to be carefully removed with a wet brush. Otherwise, clots of dry mixtures will become visible from under the paint.

How to glue the skirting board on the ceiling

Tip: Installation of the plinth should be started from any corner of the room.

Ceiling baguette can be attached in two ways:

1. over wallpaper.
2. Before wallpapering the walls.

Tip: Baguettes are usually white in color, so be sure to wash your hands well with soap and water before handling to prevent product contamination. Or, you need to work in clean gloves.

The gluing process is quite simple, but problems arise with trimming corners.

The subtleties of the technology of work:

• Particular attention should be paid to cleaning the ceiling and walls from the presence of traces of glue. Acrylic and silicone compounds are removed with a rubber spatula and a damp cloth. When sticking a baguette on putty, the excess is removed with a small brush, well moistened with water.
• All gaps between the baguette, ceiling and walls must be carefully filled with glue. The same should be done with the connections in the corners of the ceiling plinth.

Tip: You can’t expect that such cracks can be masked with paint or gluing wallpaper on the ceiling, this will not work. The glue smeared on the ceiling and walls must be carefully removed, as shown in the photo.

• When joining straight sections, often when the glue dries, the edge of the baguette floats down and a step is formed. To avoid this, the joint of two adjacent skirting boards must be chipped in the desired position with needles, or fixed with masking tape.
• After the glue dries, the needles are removed, and the resulting small holes and dents are carefully covered with the same glue or putty.
• Baguettes are painted several times. The first layer - primer, allows you to hide all putty joints, and all other decorative layers are performed simultaneously with painting the ceiling. Finally, the excess glue on the baguette is cut off.

How to glue baguettes on wallpaper

Work procedure:

• On the surface of the baguette, which are adjacent to the ceiling and wall, a thin layer of glue is applied.
• The plank is applied to the wall and held according to the instructions for the adhesive.
• Excess glue is removed with a clean rag or sponge.
• All joints are carefully sealed with white sealant.
• If necessary, the entire surface is painted with acrylic or water-based paint.

Tip: Painting the ceiling cornices should be carried out very carefully so as not to damage the glued wallpaper. It is best to do this before installation.

The main advantage of this method is that there is no need to adjust the wallpaper to fit the baguette. Framing will hide all existing burrs, distortions in the upper part of the wallpaper.

How a baguette is attached before wallpapering

This option can be found quite often. It is preferred by many professionals.

The order of work is as follows:

• The walls and ceiling are carefully prepared, the surfaces are leveled with putty.
• With the help of a miter box, the ends are cut.
• A baguette is attached to the putty or drywall adhesive.
• All the gaps formed between the baguettes, the ceiling and the walls are rubbed with putty.
• Excess material is removed with a clean rag.
• Subsequent work is stopped until the putty dries.
• All surfaces are primed.
• Painted in selected color.
• Wallpaper is glued. At the same time, the overlap in the upper part is removed by applying a spatula and cutting off the excess with a clerical knife.

Tip: Painting a baguette with the same color as the ceiling gives the visual effect of a monolithic structure.

The main advantage of this method is that all defects are easy to fix, the frieze is painted at the installation site, and there is no fear of damaging the wallpaper.

How to glue a baguette in the corners

Preparing corners and joints is the most difficult and painstaking job of installing a frieze on the ceiling.

For work you will need:

• Small spatula.
• Sealant or putty in a suitable container.
• Miter box.
• Stationery knife or hacksaw.

Tip: Fitting the last plank should be done by cutting out the corner to avoid damage to the material when an error occurs.

For the correct trimming of the ceiling plinth in the corners, you must follow some rules.

If in the room all the angles are even and make up 90˚, then:

• Right angles should be all:

1. between adjacent walls to each other;
2. between walls and ceiling.

Only in this case it will be possible to carefully cut the corners with the help of a miter box.

• With the help of a miter box, the ceiling plinths joined in the corner are first cut.
• Their ends are brought to the desired size with an ordinary construction blade.
• The gap is evenly distributed over the two lengths of friezes to prevent tooth defects.

Order of cutting corners:

• In the absence of work experience, it is better to practice using small pieces of fillets.
• The plank in the miter box is placed in such a way as it will be located on the wall.
• The lower part of the baguette is tightly pressed against the wall of the miter box.

How baguettes are glued to the corners

The order of work is as follows:

• The end is cut at the desired angle. For this, a knife or a saw is used; strong pressure on the surface of the baguette cannot be done, this can crumble the material. Typically the angle is 45°.
• The cut edges are applied to each other.
• The absence of gaps is controlled.
• With a knife, if necessary, interfering parts are cut.
• Fillets are applied to the installation site.
• The final adjustment of the elements is in progress.
• Parts are being installed.

The corners of the ceiling plinth are glued, as indicated on the product label, in the same way as the main profile. For those who are interested in gluing baguettes to the ceiling, the video presented in this article shows in detail the entire process from start to finish. After mounting the baguettes, you can give them an original decorative look using spray paint.

When the ceiling finishes come to an end and the moment comes, few people think about the fact that there are rules and requirements for this seemingly simple part of the work. Starting to glue in a clumsy way, trimming on the spot, without additional marking, you can completely spoil the whole appearance of the room. The purpose of baguettes is completely different, they should improve the interior, making it even more original and unique. By following the rules, you will not spoil anything, but on the contrary, you will improve it, and the work process itself will be much easier. How to glue baguettes on the ceiling and when to do it - you should find out in advance and get to work already fully armed.

Gluing ceiling moldings is the finishing touch in finishing the ceiling.

When to glue skirting boards

If you are lucky and you have perfectly even walls and, then you can glue the skirting boards after gluing the wallpaper on a special glue.

But since even walls are practically nonsense and are very rare, it is worth fixing them to visually hide all irregularities and prevent gaps from appearing. decorative trim before wallpapering, but at the end of work on.

Also, get everything ready. necessary tools, which may be needed to glue the fillets according to all the rules.

Back to index

Fixing the skirting board to the ceiling

Only after all the necessary tools are ready can you start gluing the ceiling baguettes.

You will need:

1. Miter box.
2. Building level.
3. Glue, liquid nails or finishing putty.
4. Construction or just a sharp knife.
5. Hacksaw for metal.
6. Rag or sponge.
7. Pencil.
8. Small paint brush.
9. Fine-grained sandpaper.
10. Soap solution.

Back to index

Training

The surface where you will glue the baguettes must be very carefully cleaned of dust.

Then it is well primed, this is done not only for the purpose of leveling, but also for better contact baguette with surface. Using the level, check the evenness, a convenient level length for such work is at least 1.5 meters.

Back to index

markup

If the angles in the room are ideal, i.e., equal to 90 degrees, then markings for baguettes can be omitted.

Marking can be omitted when the corners in the room where you are making repairs are 90 degrees. Otherwise, markup is necessary, it will give accuracy and make your work easier.

The baguette is applied to the corner and lines are drawn with a pencil, above and below. Then marks are made on the baguette itself. For uneven corners, it is worth measuring each corner separately, this is necessary, because otherwise you can ruin the baguette and have to cut it off.

Cut off unnecessary parts of the plinth according to the marks and, checking, fold them in slices, inaccuracies are corrected with sandpaper or a clerical knife.

Back to index

Making decorative finishes

It is necessary to glue baguettes on the ceiling starting from the corners. This is especially important when the room is large enough. In a small room, you will need to make marks not only from the side of the corners, but also from opposite side. Prepare a soap solution and a rag, let them be at your fingertips. Glue is applied along the edges of the fillet, of course, it is more convenient to do this with a gun, but this can also be done with an ordinary brush without difficulty. Apply such an amount of glue that, after firmly pressing on the edges, excess protrudes.

1. The plinth is precisely applied to the intended line and pressed tightly along the entire length. Excess glue is carefully distributed along the edges, and the remains are removed with a cloth and soapy water. The joints of baguettes are also coated with glue.
2. Try to work carefully, not smearing glue all over the baseboard. and making sure that the joints are even, proceed to further work. Take a baguette and attach it to the remaining gap between the corners.
3. Mark the desired length of the baguette with a pencil, carefully cut it off and glue it in the same way, not forgetting to coat the joints. Carefully putty the seams and process with fine-grained sandpaper. To facilitate the subsequent care of baguettes and extend their service life, it is worth painting them in several layers. It is baguettes that collect the largest part of the dust; without painting, they will quickly lose their appearance.

Back to index

Suspended ceiling

The stretch ceiling is also decorated with fillets. Do not be afraid to damage the surface, if you do everything right, then your stretch ceiling will not suffer.

Marking is done only on baguettes, again it is worth starting work from the corners. Keeping the surface of the ceiling, it is inserted between it and the baguette paper strip, which can be glued from old newspapers. Newspapers are removed after gluing, puttying and painting.

Thanks to decorating with plinths, your stretch ceiling will become even more original and perfect.