How to design a kitchen project yourself. Productive DIY kitchen design project

When it's time to furnish new kitchen or to repair it, it becomes necessary to draw up a design project. Many people prefer to use the services of specialists, but it is much more profitable to develop a project on their own. After all, only the owner knows exactly what the room should be in order to fully satisfy everyone. functional requirements, storage of dishes and utensils, enough space for food and kitchen equipment and other points.

Project scheme

What to consider when drawing up a design project

Having decided to make the arrangement on their own, everyone wants to end up with a beautiful, functional and comfortable room. With the right approach, everyone can do it.

The decisive factor in drawing up the design of the kitchen is the size of the room and the location of window and door openings.

Also, the design of the kitchen on your own will require you to provide not only the choice and placement of furniture, but also the design of the walls, floor and ceiling, think over the organization of lighting, window design.

In order for the design to be successful, it is necessary:

Outlet layout.

• choose the style in which the room will be decorated;
• decide on colors by choosing harmonious color combinations for a future project;
• read the placement rules kitchen furniture;
• choose the materials that will be used for decoration.

The kitchen is the most technologically advanced room in the house. There are many communications here, the location of which will have to be taken into account when drawing up the design. Therefore, before starting work, it is necessary to draw up a plan of the room, marking on it the locations of all communications, this will help to avoid mistakes.

Back to index

Furniture arrangement

When drawing up a kitchen project on your own, you need to remember that the arrangement of furniture in the room should create not only comfort, but also the maximum convenience of the cooking process. It is very important to place correctly functional elements kitchens, called the "kitchen triangle" - a refrigerator, sink and stove, forming areas for storing, preparing and preparing food. Their correct location ensures the convenience of cooking, while it should be borne in mind that:

• the stove is always installed near gas pipe;
• the refrigerator should not be placed near the stove and heating appliances, as due to their heat it can fail;
• above the sink it is convenient to provide a dryer for dishes, and next to it - cabinets for storing utensils and cutlery.

The dream of any owner is to have a comfortable, stylish, unparalleled kitchen. Design proposals are very diverse, but expensive, so you should try to make a sketch of the kitchen yourself. This will require paper, pencil, tape measure, cardboard, glue and a good mood.

Benefits of working independently

The most important plus is the ability to model a sketch of the kitchen of your dreams, using your previous skills in drawing, measuring, calculating, creative ideas and the desire to draw a kitchen project one and only. This exciting work will bring a lot of pleasant emotions, because. in addition to self-expression, it provides for the wishes of the household in terms of comfort for everyone. Therefore, all family members will be able to draw a kitchen on paper, and on the general advice, you can choose the most original sketches.

The second advantage is significant savings funds on the call of the designer and the complete development of the project. Having presented this amount, it is still recommended to try to draw a sketch of the kitchen on your own.

Disadvantages of independent work

Cons in creative work is always very small, because it allows you to gain additional skills and gain experience in a new business for yourself. The only thing worth paying attention to is the careful, scrupulous execution of the task of measuring each centimeter of the kitchen area and transferring it to paper, making cardboard layouts and other work that requires time and accuracy. Otherwise, the kitchen set will not fit in size or the door will open halfway, hitting the furniture. Therefore, when making a sketch, do not ignore the tips for completely recreating the future kitchen. small size on paper, then everything will work out and fall into place.

Instructions for making a sketch

Before you design the kitchen of your dreams, you need to stock up on some sheets of paper, a pen, pencil, cardboard, glue, scissors, a ruler, and a tape measure.

1st stage: measurements

The first step is to measure the room. To do this, it is necessary to determine the length and width of the floor, the height, length and width of walls, doors, windows, balconies, all protrusions and depressions present on each surface. Before starting measurements, it is recommended to complete the repair with the alignment of the walls, the design of the ceiling and the floor screed. This will take into account every centimeter and prevent inaccuracies in the sketch. The walls must be measured at the level of the floor, ceiling and at the middle of the width, the floor must also be determined at the threshold, in the center and at opposite wall. Transfer all this data to paper. If the repair is not done well enough, you can correct errors before you start arranging furniture, avoiding unforeseen moments with uneven walls or ceilings.

2nd stage: drawings

The next step is to draw the top view. To do this, it is necessary to determine the exact scale, arbitrarily chosen by the wizard for convenience. It could be 1:10, 1:20, 1:30, etc.

Another sheet will be a sketch of the wall, which will show how to draw and arrange the kitchen furniture set in the most convenient way.

Then you should alternately make sketches of all the walls with the designations of doors, windows, balconies, etc. It is recommended to make several photocopies of each such drawing. This will help to realize all ideas as much as possible, because changing the design on paper is much easier than subsequently moving the furniture in reality.

3rd stage: electrical wiring project

Very important is the wiring diagram, which should be carefully considered. In addition to full lighting, you need to take care of the availability the right amount sockets. To do this, it is recommended to consider how much household appliances planned for the kitchen, and where it will stand.

3rd stage: furniture arrangement

The next step will be the direct arrangement of furniture, and the project should be started from a top view. Having decided on the layout, you need to arm yourself the right size each piece of furniture. In this case, there are standard parameters that it is desirable to adhere to for ease of use, but individual production allows you to deviate from patterns and arrange furniture in the kitchen itself. unusual shape. Simultaneously with the arrangement of the headset, you should take care of the built-in appliances, which are presented in stores in huge assortment and allows you to choose the most appropriate size models.

After drawing up the drawing from above, you should proceed to the wall project with the arrangement of the furniture set, front view. This sketch will show the entire front of the furniture and household appliances with the appropriate parameters.

4th stage: layout

Armed with sheets with sketches of types of cuisine from all sides with required dimensions, you can start making models of furniture and appliances from cardboard, after cutting out the desired shapes and sizes. After drying, the glued models of the headset and household appliances sections should be arranged as expected in a real kitchen. If desired, the initial sketches can be loaded into a special design development system in 3D mode on a computer and look at the result of your work in the final version. But psychologists recommend making a layout, because. it will be an exciting activity for all family members, especially if there are children in it. The kitchen space and furnishings can be decorated in the same colors as the future kitchen, so it will become even more realistic.

When building a sketch of the kitchen, it is necessary to take into account the size and shape of the room. Based on these parameters, you need to decide which layout is most suitable for a comfortable pastime. So the direct arrangement of furniture in one row can be used for small kitchen or households who rarely use it for cooking and focus on the recreation area or receiving guests. corner layout considered to be universal, because it saves space and meets all ergonomic requirements. Two-row linear, U-shaped, island and peninsular are suitable for a large kitchen, in most cases combined with a living room or dining room. Each one is very comfortable and stylish, allowing you to make the most of both working area as well as a recreation area.

Many novice craftsmen try to make with their own hands not only the layout, but also the furniture itself. This saves twice the money and allows you to create unique design that meets all the taste preferences of the owner. But the danger lies in the fact that it is quite difficult to make a quality product without certain skills. In this case, it is recommended to use ready-made facades, which are sold on construction markets. Partial may also be an option. independent production steps that are easier to deal with. And professional cutting, fastening and even consumption of materials can be entrusted to specialists who offer their services in construction firms and specialized salons for the manufacture of furniture.

Designers recommend that novice designers be very careful about every measurement in the kitchen and a millimeter on paper. Such seemingly minor errors can completely ruin the entire project and upset the balance in the environment. Having made a layout, it should be carefully rechecked and in case of the smallest mistake, do not be lazy to redo it completely.

Any job requires some effort. But updating your apartment according to your own project, taking into account the wishes of the household and having a great time together will significantly improve the atmosphere in the family and bring many happy moments.

We have developed a special online kitchen designer for you in order to make it as easy as possible for you to make your dream come true, so that you can take a close look at the kitchen project before it appears in your home and make the necessary changes and additions. This program allows you to create a design project online and immediately make adjustments. The online 3d kitchen constructor service is simple and easy to use, everything is clear without prompts and guidance

Kitchen constructor online

3D kitchen designer online has a number of features.

Modern furniture manufacturers understand that every season it is not easy to meet the growing needs of the population, and each of them tries to solve this problem in different ways. The design program on our website makes it easy to choose the perfect kitchen set and create your own unique kitchen project. With our service, buying a headset becomes easier and more interesting, because you yourself take part in the development of a kitchen project. You can order a kitchen right from the 3D kitchen designer online.
Thanks to the modular principle of creating furniture, choosing the optimal and desired configuration of the kitchen is not difficult. Therefore, we recommend that you master the online designer on our website and choose the kitchen of your dreams as quickly as possible.

The advantages it has kitchen constructor online?

• Free work without registration
• Simplicity of the interface
• Designing a room of various sizes and shapes
• Wide range of materials and accessories
• Great repair helper

The designer was created specifically for those who want to plan their kitchen in detail, even before going to a furniture showroom.

In our article, we will talk about the design stages in the constructor. The interface is quite simple, anyone can figure it out and create a kitchen project on their computer without leaving home.

For the program to work correctly, it is better to use the Google Chrome browser., Firefox, or Opera on a laptop or PC (not mobile devices).

Step by step creation of the project

• all elements are dragged into the room by holding down the left mouse button
• to control the camera (left-right, closer-further), use the arrows in the bottom menu, or hold down the right mouse button in Chrome or the right key + Alt in Mozilla, Opera, Yandex
• when, when dragging, the module crosses the border of another element (wall, cabinet, etc.), it will feel like it is hooked or stuck. This happens exactly on the border of the elements, and is done so that everything is evenly spaced
• to cancel last action press Ctrl+Z at the same time (the standard combination for undoing in most programs)

In the designer in December 2018, the autosave function appeared (every minute). Those. even if you exit and re-enter the page, the program will prompt you to load an autosaved copy of the project. But just in case, I recommend periodically saving the project file to your computer: in the top menu. Save after all significant changes in the project, so as not to accidentally lose them.

1. Room parameters

1. Dimensions of the room. Select the default dimensions, press Delete and write the actual dimensions in centimeters (wall 1, wall 2, height).

2. Doors, Windows - when clicked, options for windows, doors and ventilation shafts / columns / beams will appear. Select desired element and, holding the left mouse button, drag it to the desired part of the room. When you click on an element, and then on the ruler icon, a menu will pop up on the right, where you can specify your width, height, and depth. You can delete an unnecessary module by pressing the Delete button on the keyboard, or by the trash can icon when an element is selected.

3. Walls and Floor. Here you can choose suitable materials and colors. Click on the color you like and the floor/wall will automatically change color.

2. Kitchen parameters

Here you can change the default headset parameters: table top thickness 40 mm, plinth height 120 mm, backsplash height 560 mm.

3. Modules: cabinets and appliances

1. Click Modules and the menu will open.

2. Lower - we form the lower tier of the kitchen. Drag desired cabinet by holding down the left mouse button. Dimensions are set by default, but you can change them for yourself (click on Module and Ruler). There are many cabinets, and to view everything, scroll with the mouse.

To install a sink or hob, select a cabinet with a width of 60 cm (600 mm) or more, in the menu that appears, click on the Appliances icon and select what needs to be built in.

In the Module menu, you can specify the facade parameters: solid, framed, showcase (with glass), material and color*.

*It is better to specify these parameters in general for the entire headset, in the Materials section (more about it below).

3. Top, Cases - all by analogy with the Bottom cabinets. Drag to the right place and specify the dimensions. To make a cabinet or other module turn to another wall - just move it close, it will turn itself. When moving top cabinets, you will notice the height line of the backsplash, and the cabinet will "stick" to it, for ease of placement. The default is 560 mm, but you can change it in the Kitchen Options section.

All cabinets are broken down depending on the height. Most big choice on standard height 720 mm.

4. Appliances - a standard refrigerator in two colors, an extractor hood (modern and classic), gas stove and washing machine. The dimensions of any type of equipment can be changed in the same way as a cabinet (the Ruler icon). Thus, knowing the dimensions of the model, you will see how it will "become" in the headset.

Let me remind you, the built-in oven, hob and sink are specified in the parameters of the lower cabinets.

5, 6. Shelves and Bar counters.

Likewise, you can specify any size.

4. Materials: facades, countertop, apron

1, 2. The most pleasant moment is the choice of material and color of facades. Here you can and should play around a little longer and choose the right color and texture.

By default, the upper and lower cabinets are set to the same material and color. But you can click on the button "Separate fronts (or colors)" and specify separately for the lower cabinets.

MDF, Plastic, Particleboard, Solid - four collapsed submenus. Click, the submenu will expand and select the one you need.

Everything is the same in flowers.

3. The case is white by default, but you can install any.

4, 5. Tabletop, plinth - click and choose a color.

6. Apron - by default, the checkbox "Without an apron" is checked. Remove it if you want to try on the wall panel.

For example, I chose Skinali.

5, 6. Fittings and Lighting

The choice of handles, hinges, the presence of closers.

Turn off-turn on the light to view the backlit kitchen.

7. Kitchens (catalog of projects)

Very useful tool, in which you can select a finished project and continue drawing your kitchen based on it.

Here we collect best projects different area, layouts and styles.

Saving/loading a project

To save the kitchen and continue designing later, click Save Project - Floppy Down Arrow on the top menu. A file with a project with a name of this type "project_20.6.2018_12_37.dbs" will be saved to your computer. The file will be saved to the download folder specified in your browser settings. You can send this file by mail, or download it to a USB flash drive to open it on another computer.

To continue designing, load the saved file - to do this, click on the folder button on the top menu and select the backup.dbs file.

Video on use from the developers of the program:

How to make a kitchen project if its area is limited and can only be placed minimum set necessary furniture and equipment? In order to properly use the space of a small or non-standard room, it is worth making a project for a kitchen set and the location of other kitchen elements on your own, taking into account the features of the room and accurately determining the placement of everything you need. For a small kitchen, aged in classical style and elegant set "Infiniti".

Original design projects kitchens equipped with a variety of functional modern designs are always admired.

Ways to expand the kitchen space

The design of the kitchen begins with an assessment of the possibilities for expanding the space through an adjacent room, corridor, pantry, etc. If the kitchen wall is not a load-bearing one, the best solution would be to demolish it and install a modern spacious kitchen-dining room.

To visually expand the space, use the replacement technique regular door on an arch or sliding doors. Besides visual magnification space, this technique gives an elegant and modern look room.

A high-quality kitchen project must necessarily include zoning of the room. Zoning consists in dividing the space into a cooking area, a dining area and a recreation area. Visually, the zones can be separated using different color solutions(combining with each other), variations floor covering, furniture arrangements, etc.

Kitchen furniture

Standard is the height of the lower modules with a tabletop in the range of 850-860 mm. Their depth is determined by the tabletop at 600 mm, as a result of which the module itself must be 500-550 mm deep. In addition, the depth of the lower modules is determined by the gap between their rear wall and the wall of the room and the purpose of the cabinets.

It is necessary to properly design the plumbing of communications before designing the kitchen. Many inexperienced builders make water supply, sewerage and electrical sockets directly behind the dishwasher or washing machine, which subsequently becomes a problem, because the rear gap in the modules is about 10 mm.

The height of the upper modules corresponds to an individual project and is limited only by the imagination of the kitchen owners. The standard sizes are as follows: 500, 600, 700, 800 and 900 mm.

The depth of the upper modules ranges from 320-450 mm. The length of the modules is made in accordance with a step of 50 and 100 mm. So, for example, kitchen modules, depending on its area, will have dimensions of 350, 400, 450, 500 mm or more, but one of the modules will be made in accordance with the required dimensions.

The design of the kitchen will not do without taking into account the placement of the necessary equipment.

Standard dimensions of both built-in and free-standing slabs: 450, 500, 600 mm.

Exists great amount types of sinks, but the most convenient are overhead sinks with a bowl and a wing. modern industry provides many types and sizes of refrigerators. The only thing that should be taken into account in the design of the kitchen and space for the refrigerator is about 50 mm of additional space for ease of installation.

Drawing up a floor plan

Independent kitchen design includes drawing up a drawing. To do this, you need to measure all the dimensions of the room:

• height;
• width at the level of mounted modules (2200 mm);
• width at the level of the tabletop (850 mm);
• width at the plinth level (100 mm).

These dimensions are indicated on the plan. For the correct development of the project with your own hands, it is necessary to apply a plan and dimensions of communications to the diagram:

• the location of the ventilation grill;
• the location of the gas pipe, stove or electric stove socket;
• location of water supply and sewerage.

Put on the diagram all the protruding places on the walls (for example, a ventilation duct) and the dimensions of the window sills.

After determining the dimensions, you can begin to develop the design of the future kitchen. According to the concept of construction, the kitchen can be straight, angular, U-shaped or consist of separate modules in different places.

Above we have given standard sizes kitchen elements used by most manufacturers, but, of course, kitchen design is an individual thing, and you can also use custom sizes. This option will stand out originality, but it will also cost more.

The arrangement of elements on the diagram should begin from the corner of the room. In most cases, a sink is located in the corner of the kitchen. According to the “wet zone” rule, a dishwasher and washing machine. Many do not know how to correctly position the radius elements. Between them and the wall it is necessary to leave a gap of about 10 cm.

When arranging the upper shelves, it is also necessary to start from the corner. Special attention care must be taken to compensate for the difference in width between the top corner module and the table underneath. This must be done before the stove is located, since the hood must be directly above it.

After the design of the kitchen is completed, you need to check all the dimensions again. You should also be aware of the dimensions of the pipes. central heating and window sill.

According to such a plan, the simplest functional kitchen can be designed. If desired, you can complicate its design by adding various functional and decorative elements: bar counter, niches, stained-glass windows, etc.

Individual project DIY kitchens are a great opportunity not only to take into account all the features of the room and personal wishes for functionality and design, but also the opportunity to learn something new and proudly show the kitchen to guests as a creation of their own hands.

But if you need a design using complex elements, it is better to turn to professional designer. You can also use finished projects kitchens, made in compliance with the necessary proportions.