Paint the pine in wenge color. Using the color "wenge

January 13, 2018
Specialization: facade finishing, interior decoration, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

The color of wenge has recently been very popular and is widely used by designers. But, what does this fashionable word mean, in what details of the decor can this color be used and with what other tones does it combine? Next, I will answer these and some other questions, which will surely help you diversify the interior of your home and make it a little more modern.

What is wenge

First of all, let's figure out what this color is and where its name comes from. So, wenge is valuable breed wood, which is obtained from the tree of the same name. This breed grows in South Africa and is considered to be endangered, which is the reason for its high cost.

The palette of this wood ranges from golden brown to maroon and chocolate with black veins. Therefore, the color of wenge is called a brown tree, which can vary in saturation and shades.

I must say that, unlike many other breeds, wenge dominates in the interior, i.e. immediately catches the eye. Therefore, when making a design with your own hands, you should take into account many nuances, which I will discuss below.

Where to find application

As we found out, wenge is wood. Accordingly, it is necessary to apply the considered tone in wooden elements:

Furniture

Most often, the color in question is used in furniture. Moreover, it looks best in modern interiors built on contrast. Laconic cabinets, cabinets and racks on a light background look stylish and at the same time strict.

The only thing to achieve the desired effect is to provide a light background. Otherwise, the interior will turn out to be too gloomy.

If the walls are dark, white or pastel colors should be present in the furniture itself. For example, a cabinet may have a white facade, while the rest of its elements may be brown.

An interesting solution is to decorate the walls with dark wood paneling. Looks good with this finish. white furniture. For example, you can install a milk set in the kitchen against the background of a “chocolate” apron.

The brown bed can be decorated with contrasting textiles. At the same time, so that the bedroom does not seem gloomy, it is desirable to cover the floor with light-colored material.

Flooring

Price natural parquet of this wood is very high, so afford given material may not be all. But this does not mean that such floor covering will have to refuse. An affordable solution for everyone is a laminate or linoleum that imitates this type of wood.

It is necessary to use this coating very carefully, as it can make the room too gloomy and visually cramped. In particular, you should not finish the floor with such a coating in rooms with a lack of natural light or with a small area.

In such rooms, it is better to use a white or beige floor, for example, under bleached oak, which goes well with dark furniture.

If you decide to make the floor dark, it is better to refuse brown furniture. True, if the room is spacious and well lit, you can also install some dark brown furniture elements, for example, a chest of drawers in the bedroom or a table in the kitchen. But the decoration of the walls and ceiling in this case must be light, so that the atmosphere in the room does not turn out to be too oppressive.

The biggest mistake of beginners is to combine monochrome contrasting tones without using bright accents. This design looks too boring and faceless. Therefore from bright colors cannot be completely.

Doors and decorative elements

Interior doors of the color in question fit well into any premises, regardless of their size and degree of illumination. In tone with them, platbands and, as a rule, floor plinths are selected.

As for the floor, it is not at all necessary to finish it in the color of the plinth or somehow “tie” it to the doors. Any combination will look harmonious.

I must say, the plinth also does not have to be matched to the trim. It may be a little lighter. But the doors and platbands are always shaved to match.

What tones are best combined with

As I said, the tree in question comes in different shades - from golden to chocolate. Therefore, the combination of colors depends largely on the tone of the tree:

• All shades. It goes well with blue, turquoise, pink, mint, beige, gray and white;
• Chocolate and maroon. Can be combined with bright orange and yellow, as well as pistachio, red or green.

Separately, it should be said about the choice of textiles:

• Curtains. The classic solution is to use curtains to match the color of the wood used in the interior. But, keep in mind that dark curtains are not suitable for all rooms - if the room is dark and small, it is better to use light curtains;

• Rugs. If the floor is light, you can use rugs in brown or any neutral shades. Against a dark background, light carpets look better;

• Covers and bed linen. The principle is the same as when choosing any other textile - if the bedroom contains brown wooden furniture, but at the same time the bed is light, textiles can be used brown. Otherwise, as I said, it is better to use light-colored linens.

Here, in fact, is the whole basic instruction for using wenge in the interior.

Conclusion

Now you know what wenge is and how to use this tone in the interior. If you have any questions about the design, please contact me in the comments, and I will be happy to help with advice. But, first watch the video in this article.

Tell me, the Canadian door should be painted in the color of Wenge. Is it possible to?

You just need to purchase paint or impregnation of the color that you need. The photo below shows Wenge color, light. In principle, I do not see anything complicated, since it is rather light Brown color, with a slight addition of ocher.

Dark same color Wenge, it's more of a mixture of dark brown, with a bit of black added.

I think it's possible to buy Pinotex or Morilka, the specified color, the main thing is you just need to decide on a shade.

There are so many shades that fit the definition of wenge color that you can definitely choose your own shade of this color for painting the door. It depends only on you what shade you want to get, the range is large, although I tend to think that the color of wenge is still natural brown. To pick up suitable color, you will have to buy several paints, pigment paste and "conjure" for a long time when mixing. To do this, there is a special apparatus where paints are mixed. I don’t know what to call it correctly, but I used this method several times to select the right shade of paint.

To get the desired color of Wenge, gradually, drop by drop into yellow, red, orange paint, add black, just mix well, only then add more black paint if the shade does not fit and so on until you get the desired one.

Or carefully mix red, yellow, Blue colour paint and to get the right shade add black or white, whatever you need, darker or lighter shade.

Doors in wenge color:

the wenge tree has different shades and it’s impossible to say how to get them, and there aren’t any universal recipes to get that color. Most likely you will get something of your own, but not one hundred percent wenge.

It’s better not to suffer and not mix anything, but just go to the store and buy - many companies have a similar color

Wenge color is gaining popularity in interior solutions country houses and city apartments. Do interior doors in this color is to bring luxury and elegance to the design. The tree itself is rare and quite expensive. Due to the fact that its shades are dark and varied, almost any door leaf can be turned into wenge, provided correct selection paint colors.

What's the color?

Fashion trends in design have elevated the color of wenge to a height. This is a tree from the legume family that grows in the tropics of Africa. It is valued for its rarity, as well as hardness, strength and interesting texture.

Wenge texture

In design, a door leaf of this color brings notes of aristocracy and respectability. The color is richly dark and deep; it is possible to adapt such interior door leaves to any design, including a minimalist one.

Note! Despite the versatility of the wenge-colored door leaf, it is better to use it in an interior that is closer to the classic one.

Combination with other colors

Any interior should harmoniously combine colors and textures, when it comes to interior door panels, then the choice of color for their coloring is especially carefully approached. Some combination options:

1. Red and red-orange wall decoration in combination with wenge doors will make appearance rooms dynamic and bright. White and milky can balance and soften the composition.
2. A natural and effective combination of a door leaf painted in this color with a green finish, furniture, textiles. The effect of this combination is soothing and pacifying.
3. Yellow and wenge are a bold experiment. The shade of one and the second color is selected carefully, as the picture may be too bright and difficult to perceive.
4. The interior door with wenge paint and golden color is perfectly combined. This successful tandem creates a unique and unique atmosphere.
5. Blue combines well, but if it is the main one in decoration, then you should choose bright hues, dark deep can be accents.
6. A combination of white wall and ceiling finishes with contrasting interior doors with wenge paint will become simple and understandable. To dilute a strict interior, any other colors are suitable - green, yellow, gold, orange, blue, etc.

Rice. 2 White interior door and wenge color

We make a door in the color of wenge with our own hands

There are several options for how to turn another type of wood into wenge without always needing paint. It is worth considering several options: firing and staining in several layers.

Burning

This method of turning a door leaf from pine or other wood into wenge has been known for a long time. Its key benefits are:

1. Color fastness.
2. No need to use paint, stain.
3. It is applied on a door that has natural color defects. For example, blue appears on pine from improper storage in wet rooms, etc. The firing technique will hide this.
4. The technology allows you to create a unique surface structure. Soft and loose layers of wood burn out, creating natural depressions. Hard and dense layers remain in place. The tree takes on an interesting surface.
5. The method is simple, it is easy to put into practice even for a beginner. It does not require special tools to implement.
6. Before firing, the canvas is not prepared, even special grinding is not needed.
7. One of the significant advantages is the “not tasty” burnt wood for beetles and other living creatures, which is important if the doors are used in a private wooden house.

As for the disadvantages of such processing, this is soot and soot, which is certainly from the combustion of wood.

Tools and materials

• Door leaf.
• A gas burner with a nozzle, a blowtorch will not work in this case.
• A piece of hard felt.

Work must be carried out outdoors or in a ventilated area.

Stages of work:

• The first burn - the tree turns black.

First firing stage

• The second burn is the burning of the upper layer. The fact that firing is sufficiently indicated by small cracks that appear on the surface of the canvas.

This is done in one pass, but for this you first need to fill your hand. In addition, there is a danger of overheating the tree, and it will burn out.

After the appearance of characteristic cracks on the surface, the firing stops, the canvas cools. The next stage is this cleaning, after which it will be difficult to distinguish wood from wenge by texture.

But this is not the end of the processing of pine under wenge, it is still covered with a special impregnation for wood, which will give the surface of the door a matte sheen and real nobility of wenge. Additionally covered with a layer of varnish.

Coloring

Applying paint to a door is an easy way to give it the desired color. The choice of colors is huge, which allows you to find the shade that you need. Given that the color of wenge is dark, such paint will not only be able to transform a new canvas, but also restore the old one. This decision is relevant if the house has been renovated, and the wooden door in new design does not fit.

Paint selection

The choice of paints for painting a wooden door is rich, when buying, take into account the purpose of coating with dye layers:

1. Enhance the natural beauty of wood. This will help transparent varnish, stain, impregnation. With these compositions, it will be possible to update the coloring of the tree or give it a completely new color.
2. Full decoration that hides natural textures. Paints with different bases (polyurethane, alkyd, acrylic, oil, nitro enamel). These are opaque and completely hide the wood base of the door.

Of all these paints, the most popular and in demand is alkyd enamel. It is cheap, and it can also repel moisture, which is important for wood. This paint dries quickly on the door, is resistant to temperature changes. A significant disadvantage is the pungent smell, which disappears for a long time.

Acrylic paint is almost odorless and dries quickly. The consistency of the paint is optimal for working with a brush; it will have to paint the canvas if the door is paneled. The surface will be matte regardless of the number of layers. Its peculiarity is that it is necessary to cover with a layer on top acrylic lacquer, which, like the paint itself, is quite expensive.

Nitroenamel (NE) is considered a durable paint, and only 1-2 layers are needed. Its durability is also excellent. But you can paint the canvas only on the street, since the composition of the paint contains toxic substances.

Note! Interior door paint should be safe and not emit any toxic substances.

Staining with wenge-colored stain is carried out in several layers, until the desired color is achieved. Lacquering is necessary on top if the interior door should have a shine.

Lacquer color wenge

Preparation for staining

How carefully the preparation for painting the interior canvas is carried out depends appearance and durability of the coating.

First of all, remove the door from the hinges and remove the fittings. Theoretically, it can also be painted on hinges, but in this case it is difficult to achieve high-quality coverage.

The next crucial stage is the removal of the old finish (paint), if any. There are several options for this:

• Thermal impact. This method is implemented if there is a building hair dryer, a blowtorch. Under the influence of temperature, the old paint / varnish swells, and the coating is easily removed with a spatula. The method will not work if there are non-removable plastic or glass elements on the canvas.

Removing paint with a blow dryer

• Chemical wash. In this case, solvents with chemical additives are used. They are applied with a brush, spray gun or a simple rag. After the composition has penetrated into the layer paintwork, it will swell and be easily removed with a spatula. If there are several layers on the door, you will have to repeat the application procedure required amount once.

If, after removing layers of paint, it turned out that the wood had darkened, it was treated with chlorine bleach so that the color of the wenge turned out as it should. Mix water and bleach in a ratio of 1:3. If there are any defects in the form of cracks, chips, etc. they need to be plastered.

The last step in preparing an interior door for painting is finishing sanding and cleaning from dust.

Painting process

It is necessary to apply paint on the interior door leaf in several stages (layers):

• The primer coat of paint is the first and most important, as it prepares the surface for subsequent painting. Apply the composition with a roller or spray gun.
• After drying, polishing is carried out and dust is removed.

Applying a primer coat of paint

• The second layer of paint is applied to the door leaf, it is considered the finish.
• After a few days, when the paint is completely dry, apply varnish.

Wenge paint technique

The stain coating is somewhat different. Before applying the composition, the door leaf is moistened. This technique will allow the stain to be evenly distributed. Further, the sequence is the same, only the number of layers depends on the desired shade of wenge color.

Wenge door in the interior

Conclusion

Painting a wooden door trendy color wenge is no more difficult than in any other. At the same time, it is important to follow the technology for applying the coloring composition and the conditions for its creation. All sanding and painting work is best done outside.

How to paint wooden doors: the choice of paint and stain. Application of formulations

Even if you're done at home overhaul, old interior doors can spoil its effect. It’s not worth buying new ones, you can put them in order yourself, for example, repaint them again, and they will look almost perfect. The work is quite complicated and requires some skills and knowledge, however, after our recommendations, you will be able to fully cope with it. We will not take into account complex professional solutions, we will limit ourselves to fairly simple ones.

How to paint old wooden doors with a brush yourself

At this stage, we have two ways - to leave the wood structure in sight or completely paint over it with an opaque material. Manufacturers are ready to offer us a fairly wide range of different coatings.

So what's the best way to paint? wooden door:

These include materials based on:

• alkyd;
• polyurethane;
• acrylic;
• perchlorovinyl;
• oil (it is extremely rare today).

Their price depends on many parameters.

With their help, the wood cut pattern will be highlighted as much as possible, you can also refresh the color of the material and add new shades to it:

• varnishes - tinted and transparent;
• oil impregnations;
• stains.

How to paint a door under a tree with your own hands with the effect of antiquity

1. Paint on water based(acrylic) - have an optimal consistency for working with a brush, they have excellent spreadability and good hiding power, which is only slightly inferior to oil dyes. They are environmentally friendly, as they do not contain toxic solvents.
2. Alkyd coatings have excellent water-repellent qualities, are resistant to temperature fluctuations and have a high drying speed. It is their professional painters who recommend for painting both entrance and interior doors.

Tip: apply alkyd paints it is possible only on a completely dry surface, otherwise the material will begin to flake off and peel off.

In the table you can choose the best way to paint the front wooden door

The principle of applying coloring compositions

The work is usually carried out in two stages, while two different material. On the first, impregnation is applied, on the second, the selected topcoat is applied.

Remember, if you decide to apply varnish on the door, drying oil cannot act as the first layer, only stain. At the same time, one layer of it will obviously not be enough to refresh the color of the canvas, we recommend applying as many layers as needed for a perfect result.

Tip: before painting a new wooden door. it must be treated with antiseptics.

For example, we will show how wood is treated with natural wax, which contains linseed oil and rosin, which will help preserve the naturalness of the material.

1. Take a soft cotton cloth, apply a water-repellent and heat-resistant compound on it and wipe the wooden surface with it.
2. Open the wax jar, stir the contents wooden stick and apply a small amount to the prepared surface. After that, carefully spread the material over the wood.
3. Leave the product to dry for 6-8 hours at a temperature of 20-22˚C.

At the end of the process, the surface will become much lighter. If the result does not suit you, the work can be repeated.

Tip: do not know how to paint a wooden door in wenge color. we recommend you varnish Wenge ХВ-784.

Coloring process

The door is not only a canvas, its design also includes jambs. If we limit ourselves to updating only the first, general form won't be very pretty.

Do not know how to paint an interior wooden door best? Our advice - paint brush

If you decide to paint the door in White color with your own hands, we suggest doing the following:

1. Remove the door wooden canvas from the hinges and place it on a stable surface such as a work table, 2 stools or a goat. In the case of using an alkyd composition, it is necessary to ensure excellent ventilation in the room, and it is best to do this outside.
2. If the canvas is not removed, it must be blocked with wedges, providing access to all elements of the door. Blocking will also help in the case when the door, when dried, can simply slam shut, damaging the dry layer of dye.

How to paint wood doors with clear varnish

Surface preparation

The most difficult stage of work, so it should be taken very carefully:

1. Remove the door from its hinges and remove all fittings from it.
2. Sand the surface with emery cloth (150 µm). you can use grinder on a flat open surface, and in inaccessible places - by hand. Be sure to carefully process the ends. You need to remove all layers of paint, primer and putty, reaching the main layer. You can also use a building hair dryer or special washes.
3. Then the surface should be treated with fine sandpaper.
4. Take a damp sponge and remove dust from the canvas.
5. Putty on wood, specially selected for the material, repair possible cracks and chips, if later it is supposed to use transparent compounds. In the case of using opaque paints or varnishes, you don’t have to worry about choosing the color of the putty for wood.

What paint to paint the wooden door of the house

Tip: remember about the gaps between the canvas and its decorative elements of the canvas, as well as the lintel and the jamb.

1. After drying, sand the surface again with sandpaper - first with a medium grain, then with a fine one.

Tip: For deep dents under opaque paint, you can use an auto-filler that does not contain fiberglass.

1. Vacuum the surface, wipe with a damp cloth and dry it.

Tip: if you find under the layers old paint darkened solid wood, it can be bleached with a solution of bleach and water in a ratio of 1:3.

How to paint white door wood stain

How to paint a door leaf

1. Take primer composition and a narrow panel brush. Examine the latter and remove loose hairs from it, and then fluff it. Use the brush to carefully paint over the corners and small details.

In the photo - how to paint a wooden door with a brush and roller

Tip: to work with one door leaf it is unprofitable to purchase a spray gun.

1. Prepare a roller and use it to apply primer to large area surfaces.
2. After drying, sand the primer coat with sandpaper.
3. Apply with a brush and roller the main decorative layer.
   There are two rules:

• panel doors should begin to be covered from the upper left corner towards the lower right, the second layer - longitudinally, the third - opposite to the first;
• paneled - start with recesses, and finish with a roller as well, as mentioned above.

Tip: When choosing a primer, make sure that its tone is slightly lighter than the base paint so that it does not affect it.

Use of wood stain

First, the door prepared for work should be slightly moistened so that the material does not absorb moisture and the liquid dye lies flat.

Three steps are used:

• along the fibers - wait until the water-soluble stain dries, and clean the surface with sandpaper zero, and then clean it of dust;
• across the fibers
• along the fibres.

If the door will be covered with transparent varnish, start covering the jambs, as well as the unremoved canvas from the hinges, from below, then splashes and drops will not fall on unpainted places. In the case of using an opaque composition, the latter will not interfere in any way.

Tip: repeated application of stain will help achieve the desired color.

Conclusion

Painting a wooden door yourself is not difficult at all, using the above tips. It is necessary to observe the accuracy of the instructions and correctly select the necessary coloring compositions for work. Now you can easily update your wooden interior and entrance doors. in this article will provide an opportunity to find additional information on the above topic.

When decorating the surfaces of walls, furniture and other objects with paint, the question arises of mixing them to obtain the desired color. Not always available in stores desired color or shade, so you can use the mixing table. Creating color by hand from improvised paints is also cost-effective.

Features when working with acrylic paints

Acrylic paints are inexpensive, easy to work with and dry relatively quickly. But the disadvantage is a narrow palette of colors, so you need to create the desired shade manually. You can get burgundy, purple, turquoise, sand, wenge, lilac, and others by mixing colors.

There are some rules when working with acrylic:

1. The surface to be painted must be smooth, clean and free of oil and greasy spots. It must first be cleaned of the previous finish. It is not recommended to apply a new coat of paint on the old one;
2. Before painting, the walls must be leveled with putty, and then apply several layers of primer. The primer is used for better adhesion of paint and for less consumption;
3. Before use, acrylic must be diluted with water or special solvents, but it is better to do this in a separate container, with a portion of paint. This is necessary in order not to spoil the entire volume at once, but to use only as much as necessary.
4. After work, the used rollers and brushes must be rinsed well with water, otherwise they will become unsuitable for further work. You also need to wash other tools that have been used. The top of the paint bucket needs to be wiped down so that the lid can be opened in the future.
5. Most often, painting occurs in 2-3 stages, and for an effective result, you need to do it in one direction. To simplify and speed up the work, you can take a spray gun.

Important! Also, do not forget about the precautions, before work it is better to cover or seal all places and objects that will not be stained. You can work with the material at a temperature not lower than 5 degrees and not higher than 27 degrees.

Another main application rule is to use paint first on small area or a completely separate surface. When creating the desired shade, it is better to try it on a draft. You also need to wait until it dries completely, because after the color becomes a little darker or lighter, depending on the type of paint. And if the color matches the expected desired result, then you can start painting the surface or decorating objects.

What colors to buy

Tinting is the name of the science that studies mixing styles and getting the right shade. It is this science that helps to get lilac, as well as fuchsia, ivory, sea ​​wave or the sea when mixing colors. In theory, to create many colors, it is enough to have yellow, red and blue. But in this case, you can get a narrow spectrum.

To create a wide palette, it is enough to buy such colors:

• Red;
• Yellow;
• Brown;
• Pink;
• Blue;
• Black;
• White.

These colors are quite enough for applying the main scales. Gold, silver, mother-of-pearl and other additional colors are also used for decoration of drawings.

Mixing Features

You can find out how to mix and get the right shade by consulting with a specialist in the store when buying.

Tip: The main rule of mixing is that dry and liquid colors cannot be combined. They don't match.

There are 4 main colors - white, red, blue and green. With their help, you can get many others. For example, khaki can be obtained by mixing brown and green. And to get brown when mixed, you can from red and green. Beige - take brown and white.

Working with a table

Working with the table is to find the desired color and shade, and next to the line, the desired colors for mixing will be indicated. For example, get purple when mixing acrylic paints, it is possible when mixing red and blue. And to make it light or dark, just add a little white or black color, respectively. The disadvantage of working from the table is that it does not indicate the amount of added pigment - the ratio. Therefore, when mixing, practice and color perception are needed.

Here you can simply take and mix colors first in the same proportion, and then add another for the desired shade. Or use specialized tables that have been developed by specialists for working with the material.

For example, to get Orange color when mixing acrylic paints, it is enough to mix red and yellow.

Acrylic Color Mixing Chart

Image	Color name	Required colors
	Grey	White and black
	Plum	Red, blue, black
	light green	Yellow, white and green
	Dark-blue	Blue and black
	Bordeaux	Red, brown, yellow, black
	dark green	Green and black
	Orange	red and yellow

Working with paints is easy, the only difficulty is creating the right shade, without proportions. But, if you understand the mixing table and practice, as well as know the rules for working with acrylic, you can create a unique and inimitable interior design with your own hands and relatively cheaply.