How to wipe interior doors. How easy and simple is it to clean MDF doors from greasy stains? Cleaning the painted MDF surface

Entrance doors are exposed to dirt no less often than interior structures. How to wash an iron door so as not to damage the finish of the canvas? This question is relevant for many owners. Consider the common types of contamination and how to remove them.

How to wash various types of dirt from a metal door

It is not in vain that manufacturers of entrance blocks use resistant and durable coatings for the canvas. Metal doors are subjected to intensive use every day. Over time, fingerprints, stains and other dirt from the street appear on the surface of the structure. Manufacturers of metal structures recommend periodically wiping the steel cloth with a mild soapy solution or special means without abrasive particles. They easily remove dust and dirt from the canvas. But how to clean an iron door from more stubborn dirt?

• Cleaning powder coated door trim and PVC MDF

• How to wash traces of whitewash and lime from an iron door

  Difficult to remove from the surface of the canvas whitewash marks(especially dried spots). Experts recommend first trying to clean the door with sandpaper. If the spots are large in size, you can apply "folk" methods. For example, vinegar diluted in water will help get rid of streaks. Approximate proportion: 20 grams of vinegar per liter of water.
  Vinegar can be replaced with kerosene (in similar proportions). The disadvantage of this method: a specific smell of kerosene, which will disappear after a few hours. This method is not suitable for doors installed inside buildings.

Whitewash traces can be removed with a special cleaning agent, which is sold in household chemistry departments. In Russia, the Probel concentrate is odorless. The product is diluted with water. It also removes lime stains.

Sandpaper

• How to wash the foam from the door

  The process of removing from a steel sheet requires some skill. polyurethane foam... Cleansing the entrance block from cured foam is a painstaking process, which consists in mechanical removal of stains. A thick layer of foam is easier to break off. The door is removed from a thin layer of polyurethane foam with a clerical knife. If the foam is not completely dry, remove the chemical after repair with acetone or solvent.

Before working with a solvent, make sure that it does not spoil the painted surface of the canvas.

• How to wash traces of cement and putty

  Mechanical methods of cleaning an iron door are applicable to other solutions and mixtures that are often used in repair work. From cement the canvas is cleaned with a spatula, brush or any sharp object.
• Get rid of from putty fine-grained sandpaper will help. In some cases, the places of contamination can be wetted with water and then treated with a sponge and detergent. If whitish solutions form after the detergent composition, they can be washed off with water and citric acid. Sometimes, after removing the mixture, it is necessary to re-coat the metal surface with varnish.

• How to get rid of duct tape and paint stains on your door

  Masking tape, which is also often used in repairs, can be easily removed from the metal surface with a cloth soaked in hot water. Liquids containing acetone or alcohol will help get rid of old traces of scotch tape. For example, you can use nail polish remover.
• Thinner # 650 and a plastic spatula will remove the surface of the door from protective film, which the manufacturer uses for the safe transportation of input metal structures.
• Nitro solvent is indispensable for liquidation paint stains from a metal surface. In addition to him, you can try to clean the iron door from paint with white spirit or chemical agents that are sold in specialized stores.

The door performs not only a protective, but also an aesthetic function. And renovation is a "spontaneous phenomenon" within the framework of one apartment, which leaves its mark on the entrance and interior doors. As a result, the door leaf becomes covered with greasy stains, stains, and fades.

To clean the doors after renovation, you need to try hard. The choice of cleaner depends on the material of the door leaf and the degree of soiling. In addition to special compositions for washing, improvised means are used that can be found in any home.

Cleaning of iron surfaces

Many people are looking for an answer to the question of when to install doors - before or after renovation? Experts recommend installing an entrance door after work in order to minimize the degree of contamination. Although for this, the canvas can be covered with plastic wrap. So, in any case, the decision is yours.

After you have installed the front door, there is foam on it. The fresh mass can be removed with a spatula, and the remains can be washed off with a solvent (white alcohol, acetone, Profit), a special polish for polyvinyl chloride (Top Wedge, Fenozol, etc.).

In addition, a hardened foam cleaner is used for this purpose.

If the foam has dried, then it is carefully cut from the surface or removed by grinding. Then the metal door in the contaminated area is washed with any of the above solvents.

We wash plastic and wooden surfaces

Plastic and wood doors have a similar texture, the former are often laminated and the latter are painted. For this reason, it is not recommended to clean interior doors with abrasive powders that scratch their surface. The following products are used to wash them:

• Aqueous ammonia solution. Add 2 tablespoons to 500 ml of warm water. tablespoons of ammonia. This solution is used to remove greasy stains. To wash painted wooden canvases, a solution of ammonia is also used, but less concentrated (2 teaspoons of ammonia / 1 l of water). If strong contamination is present, then the concentration of the solution increases (2 tsp / 200 ml of water).
• Detergents, for example, Domestos, Profit, Shumanit.
• Solvents (white alcohol, acetone) for stubborn stains. Aggressive substances must not be used on painted surfaces.
• Baking soda. For cleaning iron surfaces, a soda solution is used, in which a cloth is moistened and the contaminated area is wiped. This method is not suitable for washing laminated products.
• An ammonia-based glass cleaner is used to remove fingerprints. This product is suitable for cleaning plastic and wood canvases.

All of these tools will help clean the door after repair from dirt of varying degrees of complexity. The main thing is to keep a cloth soaked in liquid on the surface for no longer than 5 minutes, then wipe the treated area with a clean damp cloth.

Eliminate greasy stains from the door leaf

Oily stains are classified as difficult to remove, and therefore special means are used to eliminate them.

White spirit is used to clean the iron product. This aggressive yet effective neutral odor removes grease stains quickly.

The following products are used to clean wooden doors:

• Potato. Cut the raw vegetable in half, rub the stain, and after 15 minutes, remove the marks with a damp sponge. Potatoes are used for cleaning polished surfaces.
• Talc. Sprinkle a damp washcloth with powder, wipe the dirty areas until the stain disappears. Then the door is wiped with a clean, dry cloth.
• Vinegar. To clean a painted door leaf, generously dampen a cotton swab or soft cloth with vinegar and wipe off the stain. When all moisture has been absorbed into the surface, wipe it off with a clean cloth.
• Soapy water. To remove fresh traces of grease, add shavings of soap to warm water, and then wipe the surface. After that, walk with a damp, clean cloth over the treated area.
• Clay with vinegar. Mix the components until a homogeneous slurry is formed, apply the mixture to the oily trail, let dry. Then the remnants of the product are washed off with a damp clean cloth.

Laminated doors are cleaned with alcohol solutions. To do this, water is mixed with alcohol in a ratio of 9: 1. A cotton swab dipped in liquid is applied to the stain and left for 5 minutes.

Then the surface is wiped with a clean dry cloth. For cleaning laminated doors, it is forbidden to use abrasive particles, aggressive solvents, which include acids and alkalis.

Beautiful glass products are the hardest to clean from greasy stains. This can be done with an aqueous solution of ammonia. To eliminate contamination, mix ammonia with water in a ratio of 1:10, moisten a cloth with liquid, rub the contaminated area.

Baking soda, which is applied to a damp cloth and wiped off the stained surface, will help eliminate traces of grease. For this purpose, special cleaners based on ammonia are often used.

Other pollution

To wash off the whitewash from the iron or wooden surface, use warm water and a soft napkin. Wipe the product with a damp cloth until the streaks disappear. It is important to change the water as often as possible. White plaque is removed from glass using a special spray.

Solvents will help remove paint from the door. Stains from the pressed MDF panel will help to remove alcohol; for this, cotton wool is moistened in liquid, applied to dirt, and left for 15 minutes. Then the paint is wiped off with a rag or gently cleaned off with a blade.

The frosted glass surface has a porous structure, into which paint is hammered. To clean glass with a sandblasted pattern, solvents are used, and the paint is scraped off the glossy surface with a special blade. Fresh water emulsion is washed off with water and a clean cloth.

Remove fresh primer from the door leaf with a damp sponge. For frozen pieces, use a vinegar solution, glass and tile cleaner, ammonia.

Thus, it is not difficult to clean the doors after repair, the main thing is to choose a cleaner depending on the surface material and the type of pollution. To protect the door leaf from all kinds of stains, cover it with a piece of polyethylene or a thick cloth during repair work.

Door cleaning- the ability to maintain an attractive appearance and the integrity of the coating for a long time. In this case, care must be regular and correct. Doors, like any other household item, need cleaning. For this purpose, suitable cleaning agents are specially selected depending on the material of the door surface, its color and some other parameters. Let's figure out how to properly care for the interior and exterior doors.

• adjust the doors before washing;
• lubricate locks and hinges with a special tool;
• make sure that the room has a humidity of up to 65% and a temperature of up to 24 degrees;
• remove any fresh stains from the door surface as quickly as possible, without delay;
• cover the door structure with varnish, especially if it is a low-quality canvas;
• close the doors with foil if renovation work is planned;
• In general, you need to use the door very carefully so that you do not have to try to repair serious dents or deep scratches.

The correct cleaning agent must be selected... In particular, veneer and natural wood are cleaned completely differently. If you do not take this into account, there is the possibility of hopelessly ruining the door covering. In addition, it is recommended to take into account the following tricks:

• with cool water with a few drops of ammonia, wash the glass in the decorative stakes in the door;
• use soapy water to clean metal door elements;
• wipe the doors with soft cloths only;
• get special microfiber wipes for cleaning doors;
• once every 3-4 days, wipe the decorative elements, handles and inserts of the structure from dust;
• use a disinfectant (a weak solution is sufficient).

The main reasons that lead to the fact that the door covering loses its aesthetics are insufficient or improper care, careless handling of the door.

Important! Sprays, aerosols and specially designed products are perfect for cleaning the door. They are applied to the door covering through a spray bottle, allowing any dirt to be washed off.

Fight fat

Fighting grease on wooden doors is a must, especially if they are located in the kitchen opening. The easiest way is to use folk remedies that are effective and safe to use. You can give preference to the following methods:

1. Use a water / surfactant solution or dishwashing detergent to remove stains. The method is effective for wood and MDF doors.
2. Use a raw potato cut for quick removal of grease or stains. Finally, wipe the area with a slightly damp cloth.
3. Mix equal proportions of clay and vinegar. You should get a mixture that resembles a gruel. It is applied to the stain and allowed to wait for 20-30 minutes. After that, it just remains to be washed off. This method effectively fights all types of stains, including greasy marks. For the most serious dirt, you can repeat the cleaning procedure 2-3 times. The method is suitable for cleaning unpainted wooden doors.
4. Sprinkle talcum powder on a napkin and press on the stain on the door for 5-10 minutes (you can use scotch tape). After this time, wipe off talcum powder from the surface of the door and wipe the surface with a dry cloth.

To restore the glossy shine of the surface, you need to wash the door with a solution of water and vinegar (1 tablespoon of the product is enough per liter of water).

Remember that all solutions must be rinsed off the door surface with cool water. Finally, the door leaf is thoroughly wiped dry. The use of metal brushes, hard sponges and products containing abrasive substances is unacceptable.

It is important! By the way, getting rid of dust is very simple. To do this, it is enough to wipe the door leaf with a dry and damp (but not wet) cloth. Finally, it needs to be polished using a door polish.

Glass cleaning

Cleaning glass is not an easy task. It always seems that you can easily wipe the glass insert on the door, and it will shine clean. In fact, there are always divorces, which are a real problem to eliminate.

1. Onion juice or soapy water can help remove grease stains.
2. The matt surface can be washed with a starch solution (you need to add 20 grams of starch to 500 ml of water).
3. Alcohol, thinner, acetone, and even nail polish remover can quickly remove any traces of glue, coffee and tea. However, you need to act carefully so that the funds do not come into contact with the box, rubber seals, and the skin of the hands.

You do not need to use alkalis, acids, gasoline and ammonia in a concentrated form to clean frosted glass. Scraping off dirt with a knife or scraper is taboo.

It is important! First you need to clean the glass inserts of the interior door, and then the door leaf.

Tips for caring for your iron front door to help keep it clean:

• a napkin dipped in hot water will get rid of traces of scotch tape;
• acetone-containing liquids will help get rid of old scotch tape residues;
• white spirit or other solvent will help remove traces of paint;
• sandpaper will help get rid of traces of lime and whitewash (you cannot use this method to clean vinyl or leather-coated iron doors);
• vinegar solution will help to cope with stains and traces of whitewash;
• a solution of water and kerosene will help remove plaque;
• products that contain acetone or alcohol will help get rid of polyurethane foam that has not hardened.

How to clean plastic?

How to clean plastic? It’s very simple. It is enough to use soapy water. You can give preference to the other above-mentioned compositions, but in most cases there is no need for this, since all contaminants are easily wiped off.

You can also use vinegar, liquid detergent, and baking soda. Effective for cleaning special sprays and cleaning agents for plastic surfaces.

It is important to take into account that plastic cannot be rubbed, washed with metal sponges, or rubbed with a brush. This leads to its damage, the appearance of microcracks, into which dirt is subsequently clogged.

What about defects?

Defects that may appear on the door during use can also be fought. In particular, it is recommended to heed the following advice:

1. Use beeswax sprays and polish to get rid of small cracks and other subtle blemishes.
2. Use a special wax crayon of the correct color to remove deep scratches. It is enough to rub the damaged area to fill the void of the crack.

Caring for doors is a feasible task for everyone. The procedure is not complicated and does not require serious economic costs. Regular maintenance is an opportunity to extend the service life of the door surface, to take care of its aesthetics.

Today, the most popular material in the production of doors is MDF, or finely dispersed fraction. In simpler terms, a small-sized wood chip board. If such material becomes greasy, methods of effective removal will differ depending on the type of outer coating. Find out how to remove greasy stains from MDF doors, what folk remedies are suitable for a specific door covering, what brands of household chemicals are currently on the market for this purpose. To begin with, you should arm yourself with knowledge about the types of external MDF coating.

Materials used for MDF door cladding

There are only five types of them - natural veneer, eco-veneer, polyvinyl chloride film, laminate and enamel paint. The first two types are a thin layer of wood that retains its texture. They are the most expensive types of door coverings, and are, in fact, natural wood that requires proper care.

Polyvinyl chloride (PVC) film is one of the cheapest types of cladding. Its feature is increased moisture resistance, which should be taken into account when cleaning. It comes in different colors, including patterns.

Laminated doors are similar to PVC cladding. The difference is the production technology - the laminate consists of two layers. The bottom one is printed paper, and the next top one is a film that protects the base. This type of coating can be cleaned with household solvents without fear of damaging its structure.

Enamelled doors are widely used in the furniture market. High-strength paint is distinguished by a variety of colors, and the technology of application in several layers. As a rule, in addition to this, the cladding is covered with a protective varnish. This structure allows painted doors to be cleaned by almost any means. Let's consider how to remove stains from doors of different types of cladding.

How to remove greasy stains from veneered doors

Since veneer is a natural layer of wood, no abrasive materials or aggressive chemicals can be used. From household chemicals, you can use the brands "Shumanit", "Domestos" or "Silit". Apply them to a soft cloth and gently wipe the greasy surface.

There is an effective folk remedy for removing greasy stains from doors. It consists of using regular potatoes and talcum powder. If the latter is not available, you can use baby powder. The potato is cut into two halves. The incision should be carefully wiped off the areas with fat. Wait ten to fifteen minutes until the potato juice dries. And then remove the dirt along with the starch with a dry cloth. The resulting white stains can be easily removed with talcum powder or baby powder.

As a tip: it makes sense to cover newly purchased MDF veneered doors with a polish that will prevent the formation of grease and dirt.

How to clean grease from PVC coated MDF doors

Polyvinyl chloride film is perfectly cleaned with folk remedies. Let's look at three recipes. An effective solution is a mixture of liquid soap and plumbing cleaner, which are mixed in equal parts. Then the resulting liquid is applied with a soft sponge to the contaminated areas, and left for ten to twelve minutes. After that, she is wiped off with a dry soft cloth.

Another popular recipe for removing greasy stains from the door is a mixture of baking soda and sunflower oil. You need to take both substances in the amount of three teaspoons, and mix well until a gruel is formed. She will clean the door covering. How is this method effective? Sunflower oil forms a protective film on the door, and baking soda, being a light abrasive, will clean out oily droplets.

The third popular method will tell you how to wash doors from greasy stains using a baking powder. You need to take four to five teaspoons of baking powder and pour warm water over them. The resulting solution is applied to the dirty areas with a damp and soft cloth, and then left for about ten to fifteen minutes.

See the next section for how to remove greasy stains from laminate doors using laundry soap and alcohol.

How to remove grease and dirt from laminated doors

An alcohol solution is made from a ratio of one part alcohol to nine parts water. A napkin is wetted in it, fixed on a dirty area for five minutes. Then this place is wiped with a dry soft cloth.

How to remove greasy stains from doors, if not with the help of laundry soap? Fifty to sixty grams of it should be grated into shavings, which are filled with warm water. The soapy fat content should be seventy-two percent. The resulting slurry is applied to contaminated areas. This method is simple and effective. However, all manipulations must be carried out quickly in order to avoid moisture absorption into the laminated surface.

Door laminate can be cleaned well with household products. For example, you can use the Pronto tool. This furniture polish effectively removes all types of dirt and stains. A melamine sponge is also great for cleaning. It needs to be wetted, wrung out, and simply wiped off the contaminated areas.

How to remove greasy stains from doors so that they cannot be seen? Modern stores offer sets of special pencils and pastes for this purpose. They are able to hide any type of dirt on the laminated surface.

Advice: Do not use any abrasives to maintain the laminate flooring, as they can damage the door cladding.

How to clean grease from enamelled doors

As a rule, all MDF interior doors, painted with enamel, are covered with a protective varnish layer. Therefore, the use of abrasives for cleaning is questionable. It is better to use safer folk methods.

How to clean the door from greasy stains using ordinary lemon? Very simple. It should be cut in half, rubbed with one half on the soiled areas, and wait ten to fifteen minutes. And then rinse off with warm water.

Another solution for removing greasy stains from doors is a mixture of dishwashing liquid and citric acid in the amount of fifteen grams. It is additionally diluted with warm water in the volume of a teaspoon, stirred and applied to dirty places.

For cleansing, you can use baking soda, which dissolves in a mouthwash. The mixing proportions are chosen the same. Such a mixture removes greasy stains on doors well, but you should know how to remove them effectively and with what materials. It is better to use napkins for this purpose, both for wiping and for subsequent cleaning of the door from the solution.

Not everyone installs MDF doors at home. Some also buy natural wood. How to clean a wooden door from greasy stains - the next section of the article is devoted to this issue.

How to clean grease from natural wood doors

For maintenance, use only non-abrasive cleaning agents. It is strictly forbidden to use soap solutions and washing powders, as they contain alkali. Do not rub wooden surfaces with abrasive sponges. Maintenance methods will differ depending on the type of wood.

How to clean wood doors made of mahogany and other valuable woods from greasy stains - the use of burdock oil, vinegar or wax will help in this matter. They should be diluted in warm turpentine and wipe the wooden surface with this solution using a soft cloth.

How to clean greasy stains on a wooden oak door? Oak furniture is perfectly cleaned with a mixture of twenty grams of wax, one glass of beer and one teaspoon of sugar. It is brought to a boil, cooled, and then applied to the contaminated areas with a cotton swab. After drying, wipe with a soft cloth.

How to clean greasy stains from walnut wooden doors? Grease and dirt can be easily removed with a mixture of olive oil and dry red wine in equal proportions.

But no matter what material the door is, it is important to remember some principles of purification.

The nuances of cleaning greasy dirt from doors

When caring for door coverings, it will be useful to observe the following few rules and tricks:

• before washing off greasy stains on the door, examine its coating, read the manufacturer's recommendations for cleaning it;
• Whenever using a new cleaning agent, apply it first to an inconspicuous area;
• if you suddenly bought a low-quality MDF door, and it does not get cleaned of greasy stains in any way, do not rush to get rid of it - use a self-adhesive film to hide traces of dirt;
• it is better not to use cleaners with harsh abrasive properties and metal sponges, which can severely damage any door surface;
• for cleaning the applied solutions, it is better to use soft, slightly damp cloths, or napkins;
• before washing wooden doors from greasy stains, always take into account the peculiarities of the coating, and in some cases it is better to refuse to use solvents.

In conclusion, we can say that cleaning doors from dirt and grease is actually very simple and does not require significant time spending. The main thing is to do it regularly and according to the proposed methods. Now you know how to remove greasy stains from MDF doors. And if the tree is natural, then the use of various oils for care can not only clean it, but also improve its appearance.

MDF panels, from which modern interior and exterior doors are usually made, are often contaminated with the appearance of greasy stains. To maintain the ethics and beauty of such doors, many hostesses have to use various improvised means to remove such stains. Moreover, depending on the type of surface coating, use the appropriate cleaning agents. In this review, we will take a closer look at how to remove greasy stains from MDF doors, while maintaining a natural look and without spoiling the surface layer.

Basically, the localization of greasy spots falls on the area where the door handle is located, since it is to it that we most often touch with our hands. As you know from the course of biology, the skin of our hands tends to highlight the sweat segments. When it comes into contact with the surface of the door, the very transparent sweat traces remain on which, over time, a lot of dust particles settle, and they turn into real dirty spots. Especially often young hostesses with small children and pets face such a problem.

But it is also worth noting that greasy stains on the surface of interior doors appear as a result of contact with a variety of biological or chemical liquid substances with a certain percentage of fat content.

Safe methods for cleaning MDF doors from greasy stains

Every woman strives to preserve 100% perfect cleanliness and external beauty of all surfaces in the house, therefore, in order to most effectively remove traces of grease from a wooden surface, it is recommended to first accurately determine the type of coating. After that, proceed to the selection of the most effective cleaning agent.

Advice: before starting to clean the door from various contaminants, it is recommended to conduct a trial test on the interaction of the door with the selected cleaning agent in an inconspicuous area. If no reaction occurs during the test application of the cleaning agent, use the selected ingredient to cleanse the main area of ​​contamination.

Also remember that it is not recommended to remove stubborn dirt by using the following substances:

• pure alcohol;
• undiluted acetone;
• all types of solvents;
• using acids.

Moreover, it is also strictly forbidden to use special metal and hard sponges to remove dirt, since the use of the listed equipment will not only eliminate the greasy stain, but also the protective surface layer, leaving the solid wood layer unprotected. As a result of such cleaning, you will have to either completely repaint the entire door, or even change it altogether.

Let's take a closer look at how to remove a greasy stain from MDF with a laminated, veneered and painted surface layer.

Cleaning laminated doors

First, let's look at how to clean laminated MDF panels. First of all, it should be noted that such doors have a special protective coating in the form of the thinnest film, thanks to which it is much easier to take care of them:

• To effectively remove greasy marks from the laminate, you should first prepare an alcohol solution by mixing pure alcohol with water in a 1: 9 ratio, where 9 parts is water, and 1 part is alcohol. Next, you need to moisten a small piece of cloth or napkin in the prepared mixture and, applying it to the contaminated area, try to fix it for 5–6 minutes, then wipe the treated area with a clean dry towel.

It is important to remember that laminated surfaces should not be cleaned with abrasive products, various alkalis and acids.

• You can wash off grease stains from the laminated surface with 72% laundry soap. But first, prepare a strong soapy solution from it. To clean the door, you should first quickly wipe all affected areas with soapy water using a foam sponge or melamine cloth, then rinse all soap stains from the treated areas with clean water and wipe the entire surface of the door dry with a paper towel. Perform procedures using soapy water and clean water very quickly so that the door does not have time to absorb a large amount of liquid and swell.
• You can remove a greasy stain from the laminate with a special pencil, which can be purchased at any store with household chemicals.
• And also on the shelves of modern supermarkets and household stores there is a huge selection of pasty chemicals designed specifically to remove greasy marks and other types of stubborn stains.

Cleaning the veneered surface of MDF doors

If you have installed new MDF doors with a veneered surface in your apartment, then to prevent the appearance of various scuffs, perspiration marks from hands and other stains on it, it is recommended to cover them with polish immediately after installation.

But if such a nuisance happened, and still there were greasy traces, then we will take a closer look at how to remove these contaminants in order to preserve the original appearance of the veneer coating.

Our ancestors also used one unique way to remove various contaminants from any surface - this is the use of a potato cut in half. To accomplish this, you will need the following additional ingredients:

• the potato itself, cut in half;
• a small amount of baby powder (or talcum powder);
• clean cloth or napkins.

Before removing the greasy mark from the veneered surface, you should:

1. Depending on the amount of contamination on the surface of the door, take one or two halves of the cut potatoes and place them on the cut to the tracks themselves, and, with little effort, carefully rub the entire area of ​​contamination until the moment the potato juice appears.
2. The whole thing should be left in this form for 10-12 minutes, until all the juice is completely dry.
3. After thorough drying, white starch should remain on the surface of the door, which should be removed with a clean dry cloth or napkins.
4. If, after removing the starch, white marks remain on the veneer, then taking a clean towel or napkin, apply a small amount of baby powder to it and carefully wipe the remaining stains.

Tip: after the cleaning procedure, the veneer should be carefully polished with a thin layer.

Cleaning the painted MDF surface

Almost all painted wooden surfaces have another unique property - varnish coating, which provides additional protection to the paint and gives it a beautiful shine. Therefore, in the process of caring for such a door, it is not recommended to use abrasive cleaning agents that can break the protective layer, lead to tarnishing of the treated area and the disappearance of the previous shine. Let's take a closer look at how to wash painted doors in order to preserve all the beauty of their appearance:

1. The first recommended solution is a baking soda solution, which should be prepared with equal proportions of baking soda and mouthwash. In the prepared mixture, moisten a clean cloth and treat all areas with dirt, then wipe everything dry with a clean towel.
2. You can also clean the painted door with a strong soap solution prepared on the basis of liquid 72% soap, after using which the entire treated surface of the door should be thoroughly rinsed with clean water and wiped dry with a towel.

How can you clean the interior doors with a polished surface from greasy stains?

Now let's look at how to remove grease stains from a polished wooden door. For this, it is recommended to use talcum powder or baby powder. After applying one of the products to a clean napkin, you should treat all contaminated areas of the door surface and leave everything for 20-25 minutes. After the time has passed, the remains of talcum powder or powder should be removed using a white sheet of paper or a napkin.

How to clean greasy stains from MDF and chipboard panels?

There are four ways to remove grease stains from chipboard, MDF and chipboard surfaces:

1. Using a solvent: moisten a foam sponge with this product and rub it gently into the grease spots for 4–5 minutes. After that, the treated area should be thoroughly wiped with a dry towel.
2. Using a natural remedy in the form of citric acid, which should be diluted in the amount of two tablespoons in 200 ml of water and, using a cotton pad, wash the affected areas of the door surface for 3-4 minutes.
3. Using baking soda: dilute 3 tablespoons of this product in a glass of water and a cloth soaked in the resulting mixture to remove all dirt, then wipe all treated areas dry.
4. Detergent application: Dissolve 3 tablespoons of dishwashing liquid in half a glass of water and foam thoroughly. Then apply the resulting foam to greasy spots and leave it all on for 4–5 minutes. Then rinse the panel with a cloth with clean water and dry it with a dry towel.

And how to clean doors made of PVC panels, see the following video:

Dear visitor! If you know other methods of how to remove stains, please leave your experience in the comments.