The bed is fixed to the ceiling. Ceiling bed options, fresh ideas for a modern interior

In small apartments, it is very important to correctly use the free space of the room. With such savings, it is difficult to maintain the functionality and practicality of the room without deteriorating its appearance. One of useful solutions for small rooms, the use of a bed under the ceiling is a good idea.

Read also

As a rule, such a bed can be single or double; both adults and children can sleep on it. There is usually an armchair, table, sofa, or even various shelves underneath.

Ceiling beds are divided into several types and differ in their functionality:

Do-it-yourself loft-bed assembly

If you abandoned the purchase and decided to create a bed under the ceiling on your own, then for this you need to know the stages of such work and some rules. To begin with, of course, you need to create a drawing of what was conceived. sleeping place... You can also use a sketch and, in the course of work, exclude obvious design flaws.

For beds under the ceiling there are different types fastenings. For example, a standard 4 post can be used, or two posts can be used. In the second case, opposite corners will need to be attached to the wall. V narrow rooms the bed can be fixed between the walls. In addition, there is also the option of simultaneous fixing to the ceiling and wall.

Drawing and dimensions

To correctly calculate the amount of materials required, you need to draw a plan for the future bed.

For example, in in this case the dimensions will be as follows:

• Width - 153 cm;
• Length - 213 cm;
• The distance from the floor to the bed frame is 167 cm;
• Height - 214 cm;
• Mattress width - 140 cm;
• Mattress length - 200 cm.

The dimensions must match the mattress used, but it can also be custom made. Please note that the mattress should be 5 cm below the frame and 1 cm less.

The drawing of the bed is as follows:

Necessary materials

Hardware fasteners

Furniture for creating a bed

The following list of fittings and materials may not be accurate. it is different for each case. Everything will depend on the already purchased design.

Required tools

• Gon
• Pencil
• Furniture key
• Roulette
• Screwdriver
• Screwdriver
• Sandpaper
• Level
• Sponge and brush for applying stain and varnish
• Electric jigsaw or hacksaw
• Wood drills of different sizes

Making a loft bed with your own hands

After preparing all the necessary tools and materials, you can move on to creating the bed of your dreams.

Interior designers are introducing more and more daring ideas for transforming a home modern man in an oasis of coziness, comfort and harmony. On this path, stereotypes are mercilessly broken, giving way to functional originality. The latest fashionable novelty is the bed under the ceiling - a mechanized bed that changes position like an elevator. This solution looks quite interesting, so a bedroom with such an item cannot be called boring. A non-standard bed can fit into both a nursery and an adult's room with a modern vision of the furnishings.

The choice in favor of a bed under the ceiling, the photo is offered below, can be made both to save space and to add a "zest" to stylish interior... The first goal is usually pursued in small room... When using a hanging bed due to lack of space, the following points should be considered:

1. The growth of tenants. The distance from the floor to the bed should be sufficient so that you can walk under it without bending over. So that you can sit freely on the suspended bed, it is recommended to indent at least one meter for adults and about 80 cm for children;
2. Visual reduction of the room. Yes, a bed under the ceiling frees up the required square footage, but inevitably clutters up small space... If this circumstance does not scare you, you can safely install an unusual bed;
3. A bed under the ceiling can make a baby room complete, because under it you can equip an office and a recreation area. Thanks to her, it will be possible to work, do your favorite hobby and sleep in a room with dimensions of 2 by 2.5 m. With skillful placement of furniture, the room will acquire a cozy intimacy.

If the bed under the ceiling is a whim and is installed in a huge room as a decoration, then the following should be taken into account:

1. A huge non-standard bed can divide the space in two, create the illusion of a second floor. It looks especially impressive in a spacious room with high ceilings;
2. The auxiliary lighting of the ceiling above the bed relieves the space. Lamps under the bed give it a certain mystery;
3. The metal elevator bed is as if it was created for bedrooms decorated in loft, techno or hi-tech styles. Ceiling beds are also welcome in Art Nouveau and Japanese rooms. Here are appropriate wooden structures with metal inserts. For classic and rustic style you can install a loft bed, and hanging beds made of bamboo, wood or fabrics will fit into eco and ethno styles.

Modern models

The bed under the ceiling can be mobile (sliding along the guide rails) and immovable, fixed at a certain height. If the former work with the help of a separating counterweight mechanism and are controlled by a push-button panel, the latter requires a ladder to climb.

By the type of construction, such beds are divided into:

• Bunk;
• Suspended;
• "Attics";
• French.

Sleeping places in two tiers are especially widespread in children's rooms. For adults, there are elegant bunk copies with a solid staircase. They are good for classic interiors... There is not even a hint of the playful character inherent in children's beds.

Hanging beds do not have legs and seem to float from the ceiling. They give the room an atmosphere of airiness and lightness. To keep it, you need to leave the space under it empty. If this is not possible, you can make this place with decorative storage boxes or miniature furniture.

The attic bed is often paired with vertically positioned support cabinets and built-in tables. This furniture complex can serve as a sleeping place, seating area, dressing room and office. "Attic" is usually not high (1.8 m) and can even be placed in the "Khrushchev".

Babies under 6 years old are contraindicated in the "attic" and the upper bed of a bunk bed. Descending the stairs attached to them can be traumatic.

If the bunk has no sides or they are unreliable, then in a dream the child may fall from a two-meter height. In addition, it is difficult for parents to reach their child, which becomes a problem during his illness. The French bed is intended for a married couple. Ideally, it has a high headboard, carvings and a canopy. Its ceiling version has a simplified look, but retains all its inherent charm and refined comfort. It rests on suspension mechanisms attached to the ceiling. The structure can be lowered and raised as far as it will go.

Installation features

A sleeping person should not be threatened, therefore essential requirement to the bed under the ceiling - its safety. She should be firmly attached to her supports. Therefore, it is recommended to contact a highly qualified furniture maker to install a ceiling bed.

There are several options for mounting the bed:

1. Mounting on high legs is the easiest way. Two cupboards looking at each other can also act as a support. Such designs look very stylish. Both require a firmly fixed, comfortable ladder;
2. On the mezzanine principle - placing a berth between two opposite walls appropriate in narrow spaces;
3. In the corner - the bed is attached to two walls and a ceiling for maximum reliability. It is better to fasten a wide double seat this way;
4. To the ceiling - metal anchors are introduced into it, and chains, ropes or steel cables... This is how the hanging bed is fixed. This type of installation is often combined, additionally attaching the bed to the wall.

Before fixing the bed to the ceiling or wall, check concrete floors for strength. This can be done using an electronic device. The hammer in it pushes the ball into the concrete. Electronics reads the quality of the material by the ball bouncing back. The results appear on the screen.

In the form of a mezzanine

To the ceiling

High legs

Ladder options

The staircase should be in harmony not only with the bed itself, but also with the interior of the room as a whole. The main classification divides bedside stairs into stationary and attached. The second, to be safe, must be stable and have a wide base. There is different types ladder structures:

1. Vertical - This ladder is placed on the side of the bed or at the end. It is completely flat without any protrusions. Climbing and descending it, especially in the dark, can be traumatic. Between flat and round steps, you should choose the first, since it is easy to slip on round ones;
2. Marching - here boards serve as steps. They are attached to the bowstrings at an acute angle parallel to the floor. The marching structure is suitable for kids, because it is almost impossible to stumble on it;
3. "Chest of drawers" - there are drawers in the flat steps of such a staircase. They can slide forward or sideways. A staircase with lockers is a godsend for a small room;
4. "Shelving" - in this case, the steps are protruding parts of the open shelves, which can be used from the side. To save appearance the edges of such a rack must be covered with polyvinyl chloride;
5. Podium - the structure is a staircase, the upper step of which is a platform. From it you can easily climb onto the bed. The podium can also be the lower step of the structure;
6. Corner - differs in that it forms a turn. It can be either radius or at an angle of 90 degrees. The smaller it is, the less area takes up such a staircase.

Is it possible to do in a one-room apartment

The bed under the ceiling is famous for its functionality, so it is advisable to have it in an apartment with one room. The following situations will be especially advantageous (in terms of additional space):

1. If the ceilings are high. The sleeping tier can be erected over a dressing room or pantry, if you take care of the strength of its base. This mini bedroom will look like open room on the second floor with a staircase leading to it. To hide a place to sleep from views, you can fence it off with trellises wood paneling... They are not intrusive, breathable and aesthetically zone the space;
2. There are niches in the walls. Ideally, the entire ceiling bed will fit into the vertical niche. But even if only the headboard will enter there, it makes sense to use the recess, because there you can hide the base of the structure with guide rails. Along them, the bed can go to the vault of the ceiling. Well, if there are partitions in it that can hide the bed, then in the daytime it will be invisible;
3. Two-level interior. V one-room apartment the artificially erected floor is unlikely to be high, so it is possible to arrange an "attic" bed on it. Much attention should be paid to the handrail that protects against falling in a dream, and the convenience of the stairs;
4. Square room. In a room where all sides are equal, a corner French bed will fit perfectly. It will clearly demarcate the space and provide an opportunity for comfortable living for both one person and a married couple.

A bed under the ceiling can turn into salvation or a misunderstanding. It all depends on the taste and intelligence of its owner. Before acquiring this capricious furniture product, you should think carefully and answer yourself the questions: "Is it really necessary to do without a ceiling bed?", "Where to install it?", "Will it help to save square meters?" If the answer is yes - feel free to order a unique product!

Photo

A bed under the ceiling is a new definition of a sleeping place. This technique is often used by designers in small spaces, studio apartments. With the help of such a product, it will be possible to rationally distribute space and free up additional space.

When a ceiling bed becomes a necessity

A small apartment cannot please the owners with the presence of a large amount of free space, so residents have to try to use every centimeter of the area as useful as possible. It is quite natural that, despite the limited number of square meters, people want to have a full-fledged home with a bedroom, a kitchen, a living room, and in some cases a study. Therefore, the question becomes quite relevant, as in the conditions small apartment, realize it all. Competent organization Small space: a sleeping place located under the ceiling with a dedicated work area underneath, and the steps leading up to the bed serve as drawers.

Unfortunately, the height of the ceilings does not always allow this goal to be realized, so some of the residents buy convertible convertible sofas. However, this is not a solution to the problem, because sleeping on them is not very comfortable, and the endless assembly and disassembly of furniture can be pretty tiring. The best way- a spacious bed with a quality mattress. But then another question arises regarding her placement in the room.

The problem of lack of space in compact apartments has been of concern to designers for several years. That is why an original design was invented, which not only saves space in the room, but is its highlight. This is a bed under the ceiling that rises up and down with the help of special mountings, or a loft bed with a ladder that can be used for both older and younger generations.

The bedroom under the ceiling is no longer a novelty, and now you can find a large number of various types of these products, which allow you to visually increase the area of ​​\ u200b \ u200bthe room.

There are beds equipped with rails that provide the product with mobility. At any moment, when it is necessary, the bed will simply "go away" to the ceiling or "go down" downward. Some types of modern bedding are equipped with remote control... You just have to press the desired button to activate the mechanism.

If you are lucky enough to have high ceilings, look for a bed with rigid rails. She will constantly be in one place, and to get settled on it, you need to use the stairs.

You can use metal supporting beams where the bed is attached. Then the ladder made of metal will become for you a kind of sports trainer of the "Swedish wall" type.

There is a wide range of adult models and cribs, so you can easily choose suitable option... If you come up with your own design, you can customize it or try to implement the idea yourself.

Varieties of beds

To organize a bed under the ceiling in stores, you will find the following types of beds:

• bunk- designs in which sleeping places are located one above the other. To climb to the second tier, use ladder... This option is convenient to use in a one-room apartment or a nursery for two children. In the first case, the parental sleeping place is on the ground floor, and top part serves as a bed for a child;

• hanging bed- a structure fixed to the ceiling surface with special ropes, pipes, chains or cables. A variety of stairs are also used here. With the help of properly organized lighting in the mattress laying area, such mounted products acquire a floating effect;

• french- a transformer equipped with a lift that allows you to lower it down or lift it up to the ceiling. Such models are attached not only to the ceiling, but also to the walls;

• attic- one of the most convenient options that goes well with any interior items. For example, at the bottom you can organize a work area, build in a book rack or a wardrobe. The functionality of the staircase will be provided by the boxes located in its steps.

These beds are produced in different forms and from different materials... It is better to make a custom-made product, in which the dimensions of the case are adjusted to the required parameters.

Installation features

If you ordered a specific model in a store, you should entrust its installation to specialists. With high ceilings in the room, when mounting the bed, it is better to give preference to guides with maximum rigidity. They will provide immobility to the sleeping place.

It is possible to install a movable model that is mounted to the guide rails. Control such a product using the remote control. - installation of the bed on high legs.

By including any type of such products in the interior, you will free up a lot of space, having received additional places for rest, work, games and entertainment.

In a one-room apartment, it is not always possible to organize a full-fledged room for a child, but you can make a separate corner for your son or daughter using a bed under the ceiling. A common option, in which a seating area is arranged at the top, and under it are located desk, wardrobe lockers, bookshelves and boxes for various little things.

Children's models are available in different materials and painted in a variety of shades. This will allow you to choose an option that harmoniously fits into the overall interior, combined with ceilings, walls and other furniture.

You can complement the bed with the right wallpaper, textiles that match the color of the rest of the finish. At the same time, for the adult zone, it is allowed to use other tones and shades, but it is advisable to adhere to the same texture.

Advantages and disadvantages of a sleeping place under the ceiling

A bed under the ceiling has the following advantages:

• perfectly saves space under the seating area. Thanks to this, the free space can be used at your discretion;
• interesting under the bed lighting, thereby additionally illuminating the room;
• and unusual;
• the modern arrangement of beds allows you to easily assemble or disassemble such structures;
• allows you to solve the problem of organizing sleeping places for parents and children.

Such models also have some disadvantages:

• the complexity of manufacturing;
• high price;
• installation of these products requires high-quality floor coverings that will not be damaged by a massive structure;
• visually can reduce the space in a small room.

Making a loft bed with your own hands

If you decide to make it yourself, before you start making the bed, you will have to draw a drawing of the future structure. When composing it, take into account the functionality of your future product and its complete safety in the conditions of further operation.

Tools and materials

The most simple and quick option, do it wooden bed attic. The frame for it is made of wooden beams and boards. The most affordable timber is pine. Stronger species are beech and oak, but they will cost more. You will need:

• timber 100x100 or 80x100;
• slats with which you will sheathe the structure, railings and stairs 20 or 30 mm thick;
• plywood for the lounger or special batten holders sold in every furniture store;
• screws, nails for finishing, carpentry glue.

Prepare from the tools:

• circular saw or jigsaw;
• screwdriver or drill with different attachments;
• fine-grained sandpaper or hand sander;
• hammer, clamp;
• tape measure, level, ruler.

The finished bed will need to be varnished or stained to give a more interesting shade.

The following options are used to mount the bed to the ceiling:

• supports made of wood or metal, fixed to the floor. They will not only support the weight, but also serve as a ladder to climb up to the ceiling;
• the design of the bed provides for the installation of a whole furniture complex, and the base is a wardrobe or a solid staircase with drawers. This method makes it possible to combine various subjects furniture;
• the product is fixed to the ceiling, and is fixed to the wall with its sides. This option creates the feeling of floating under the ceilings of the bed;
• full ceiling mount bed. Then there will be no second tier in the structure, and the lounger will need to be installed to the ceiling surface.

The ladder can be positioned as follows:

• on the front of the bed on either side;
• at the end of the bed. With this approach, the entire bed is made out with bumpers, and an opening is left in the legs for the descent;
• make a roll-out. It is unlikely that you will be able to cope with such a mechanism with your own hands, but you can make it to order. A similar module is fixed to the bed frame on metal hooks or loops;
• podium stairs are the safest option for young family members. In this case, the ladder is placed at a height that is half the height of the entire structure. The result is a small slope lift.

As for the sizes, choose them taking into account the purpose of the furniture and your space conditions. For example, for a kid, a fairly small size - 70x160 cm.Standard one and a half parameters 90-200 cm, for adults 140x200 cm or 160x200 cm, respectively, are suitable for a schoolchild.

When you have chosen the right model, you can start creating the drawing. At the same time, when making a drawing, take into account the scale of the room, so it will be easier for you to calculate the amount of material required.

We will consider the simplest option - making a loft bed on four supports. Proceed as follows:

• cut the material to pieces of the desired length, sand all elements with sandpaper or a grinder;
• apply antiseptic impregnation to all parts;
• according to the drawing, drill holes for the fasteners in the right places. Do this gradually as you build the bed. At the joints of the parts, coat their surfaces with wood glue;
• start assembling a frame consisting of four supports and a frame for a bed made of 100x100 timber. Fasten the bars to the uprights with a screw connection. The support bar can be fixed to the frame with metal corners. Check the vertical of the system with a square or level;
• install limiters - bumpers. Their standard height- 40 cm, but here you can already be guided by personal preferences;
• the final stage of manufacturing and assembly is a ladder. It is mounted separately and attached to the frame. The distance must be chosen so that it is easy to go up and down;
• be sure to check the reliability of all connections at the end of the work.

Now all that remains is to varnish this comfortable bed or paint it with a stain.

A do-it-yourself loft bed is in no way inferior to purchased counterparts. And if you add a little to it decorative finishing, for example, in the form of textiles, it will turn out to make a sleeping place not only functional, but also cozy and beautiful.

Extended bedroom with floating bed and glowing puzzle on the ceiling video

• Preparation for work

Each owner of a small apartment tries to use the space in it as efficiently as possible.

It should be remembered that the corners of the connection must be strictly straight.

One way to save bedroom space is with a bed under the ceiling.

If done correctly, it can have one or two sleeping places not only for a child, but also for an adult. It is convenient to place a desk, chest of drawers or sofa under such a bed.

Varieties of beds under the ceiling

Loft bed assembly diagram.

There are several different types loft beds. They differ in their functionality. The main varieties are as follows:

1. Mini loft. As a rule, it is installed in a nursery, under it there are various lockers, and its height from the floor is about 80 cm. Children from 3 years old can sleep on it.
2. Bed with storage space. This is a traditional design, under which there is a wardrobe, shelves, a chest of drawers, etc.
3. WITH working area... There is a work desk and a computer under the bed.
4. Bunk. This design provides 2 berths, top and bottom. They can be made in a single body or in different ones.
5. French loft bed. This is the most original version. This design is equipped with an elevator-like mechanism. If such a bed is raised, then the room can serve as a living room, and if it is lowered, then a bedroom.

Please note that these beds for adults need to be made from more durable and reliable materials due to their greater weight. The design of adult models, as a rule, is distinguished by restraint and clear lines.

Back to the table of contents

Preparation for work

The scheme for creating the backs.

Many craftsmen do not buy a loft bed, but make it with their own hands. You need to start work with drawing up a project. Think over the parameters of your product, taking into account its type, design features, material of manufacture, the number of beds and the age of people who will sleep on it (adults or children).

The bed under the ceiling can be fixed using various fixtures. As a rule, the bed rests on 4 supports or 2 posts, while opposite corners are attached to the wall. This unusual piece of furniture can also be attached to the ceiling, wall, or between walls if the room is narrow enough.

The size of the bed depends on the size of the mattress to be installed. If you cannot find a mattress of the desired size, then it can be made to order according to the desired parameters of the bed. The mattress should be 12 cm narrower than the body and 5 cm below it.

If you want to make a bed under the ceiling, designed for two adults, then its optimal parameters will be like this:

• length - 2.13 m;
• width - 1.53 m;
• the distance from the floor to the bottom of the hull - 1.67 m;
• the distance from the floor to the upper point of the hull is 2.14 m.

To make such a bed, you may need:

• board 220x10 cm - 2 pcs., 201x10 cm - 8 pcs., 150x10 cm - 2 pcs., 141x10 cm - 8 pcs., 56x10 cm - 6 pcs., 47x5 cm - 4 pcs.;
• timber 214 cm long - 4 pcs;
• plywood - 141x5 cm - 16 pcs;
• furniture dowels;
• clear acrylic varnish;
• stain.

Please note that the thickness of the board should be 2 cm, plywood - 1 cm, and the section of the timber should be 6x6 cm.

Tools required for work: screwdriver, tape measure, square, level, screwdriver, electric jigsaw or a hacksaw, a furniture key.

Of the tools, you should stock up on the following:

• electric jigsaw or hacksaw;
• screwdriver;
• wood drills;
• level;
• square;
• roulette;
• screwdriver;
• furniture key;
• sponge and brush;
• pencil;
• sandpaper.

Back to the table of contents

Assembling an unusual bed

When everything you need is prepared, you can proceed to the installation of the bed. Follow the steps below:

1. Handle all burrs and sharp corners of all wooden parts sandpaper... If they are not sanded, then walk over them grinder doesn't hurt either.
2. Drill holes to accommodate the fasteners.
3. Connect the 6 headboard pieces to the legs using furniture dowels. Secure the parts together with furniture bolts.
4. When both backs are ready, you can connect them with a beam using dowels. Fasten the beam with two bolts, but do not overtighten.
5. Mount the corner beam by bolting 2 boards together. Secure it to the backs with dowels.
6. One corner beam should be on the side of the wall, and the other on the outside. You need to attach restraints to the latter, thanks to which you will not fall out of bed in a dream. You also need to leave space under the stairs on the side with which you will be comfortable.
7. The basic structure is ready. Now you can tighten the bolts and secure the connections with metal corners if desired.
8. Assemble the ladder and attach it to the body.
9. Place the pieces of plywood on the bed so that the mattress can be placed on top of them. Instead of plywood, you can use a fiberboard sheet.
10. Treat the surface first with stain and then varnish.
11. After dry finishing materials you can put the mattress in the bed.

During work, be sure to check all the corners of the connection, they must be strictly straight.

Owners small apartments every free meter of living space is especially appreciated. This also applies to the arrangement of a sleeping place, which, as a rule, takes up a lot of space within a small room. In such cases, a loft bed is the ideal option. It fits perfectly into the interior, significantly expands the practicality and functionality of the room due to the built-in elements. Such furniture can have one or more sleeping places. Today we will tell you how to make a bed under the ceiling with your own hands with additional elements.

Is a bed under the ceiling a whim or a necessity?

Small housing cannot boast of enough free space, which is why the tenants face the problem of optimal use of the available space. Naturally, everyone wants the house to have enough space for a full-fledged living, but it is not always possible to competently combine the limited space for entertainment and sleep.

Important! An example of competent optimization can be considered the option when the working area is under the berth, and the shelves play the role of steps.

Many tenants, trying to get out of the situation, buy an ordinary sofa so that it can be assembled and laid out as needed. But you must agree that not a single folding sofa can replace a full-fledged bed with orthopedic mattress... There is a way out of the situation - a loft bed, which rises or falls with one movement of the hand.

Important! Children are delighted with such furniture with beautiful staircase and shelves for storing small items.

Positive and negative sides of ceiling beds

Have you decided to make your own bed under the ceiling? Then first familiarize yourself with the main features of this furniture, because they can be both negative and positive.

Pros of a loft bed:

• One hundred percent saving of free space under the berth.
• Any guest will be surprised at the presence of such interesting subject interior.
• This bed can be installed anywhere.
• The homemade structure can be folded and unfolded effortlessly.

Cons of the bed under the ceiling:

• You will have to spend a lot of money to buy all the necessary materials.
• Some people experience discomfort from just one thought that they can fall during sleep and be severely injured.

After analyzing all of the above, we can conclude that the installation of a loft bed is perfect option saving living space.

Important! Directly under the place to sleep, you can put a table or sofa, plus there will still be room for a person to pass through full height. Professional designers and engineers develop unique designs that are virtually invisible and lightweight.

Varieties of beds under the ceiling

These multifunctional, universal pieces of furniture, depending on their direct purpose and the availability of additional options, are divided into the following types:

• Mini loft bed. They are used more often for arranging children's rooms in order to create a safe sleeping place at a low height from the floor level. Below, such furniture has built-in and drawers.
• Bunk models. They usually have two berths, which are located, respectively, on the upper and lower tier.
• Loft bed with work area. main feature such a model consists in a combination of a table and a bed, that is, it allows children to do their homework, play at the computer, and, if desired, immediately go to rest.
• French bed. This - best example the most successful design solution... In this case, the ceiling acts as a support for the suspension mechanism. The bed itself can be raised to the desired height right up to the ceiling itself. At the bottom, if desired, you can install a lamp or some kind of decorative elements.

Important! It should be noted that the beds under the ceiling are necessarily subdivided into adults and children: the first is inherent in a more restrained design and a reliable frame, but the second is designed in bright colors and they often have a lightweight frame with safe, rounded edges.

Preparing to create a loft bed

Before making a bed under the ceiling with your own hands, be sure to take care of the development of a drawing to create a structure.

• It is imperative to take into account the functionality of the stock and the maximum level of safety in terms of future operation.
• It is necessary to decide on the option of fastening the structure. This can be done using four supports or two posts, fixing opposite corners to the wall surface. In addition, the base can be attached between a ceiling and a wall, or between two walls.

In our case, create a drawing with the following parameters:

• Body length - 214 cm.
• Case width - 154 cm.
• The height of the case is 215 cm.
• The width of the mattress is 140 cm.
• Mattress length - 200 cm.
• The distance from the body to the base is 165 cm.

What tools do you need to create a loft bed?

After the drawing is built, check if you have everything in stock. necessary tools, namely:

• Building level.
• A simple pencil.
• Furniture key.
• Yardstick.
• Square.
• Screwdriver.
• Hacksaw or electric jigsaw.
• Drill with drills for wood.
• Sandpaper.
• Screwdriver.
• A brush or sponge for applying furniture varnish and stain.

Phased production of a bed under the ceiling

If you have already prepared a drawing, all necessary materials, blanks and tools, then it's time to start the main stage of work. Study each step carefully so that you don't overlook any important detail.

Follow the instructions for making the bed:

• In accordance with the drawing, mark and cut out all the necessary parts using a square.
• Sand the wooden elements to obtain a perfectly flat surface without sharp corners and roughness.
• Drill holes for fasteners consistently in all parts.
• Assemble the backrests with supports. Pre-connect all the parts with furniture dowels, then screw them evenly.

Important! Make sure all parts are connected at a 90 degree angle.

• Attach rubber or plastic protective soles to the bottom of the uprights.
• Connect both backs to the beam using furniture dowels. This is done in order to fit other parts of the stock.
• Install the corner beam. First, bolt the two boards, then attach them to the backs using dowels.
• By analogy, fix the lower beam from the side of the wall.
• Install restraints in the upper area to keep the sleeping person safe from falling.
• Attach a ladder to one side of the structure.
• Check the reliability of all connections, if necessary, reinforce the bed with metal corners.
• Attach a ready-made ladder to the body of the bed.
• Supplement the base in the area where the mattress is laid with pieces of plywood or a solid piece of chipboard to give the body an additional level of reliability.
• Treat the wood with furniture varnish or wood stain.
• Replace the mattress.