Lamella - what is it? What are they for? Wooden lamellas for a bed What is a lamella for a bed.

A well-organized sleeping place ensures a healthy full sleep and good health while awake. It is not enough just to buy a mattress with an orthopedic effect, you should choose the right base for it. Orthopedic bed base - an accessory for sleeping, providing anatomically correct position the body of a sleeping person.

Advantages and features of the orthopedic base of blood

The base for the bed with slats serves to maximize the anatomical effect of the mattress. The mattress slat can be used as an element built into the bed frame or as a separate sleeping bed.

Bed accessories have the following features:

• hygiene bed due to the free movement of air;
• reinforced orthopedic effect providing uniform distribution load on the body;
• environmental safety through the use of natural materials;
• high margin of safety;
• mobility and lightness.

Depending on the design features orthopedic bed bases can withstand loads from 100 to 250 kilograms per bed.

Varieties of orthopedic bases with lamellas

Based on the dimensions of the bed, the orthopedic base for the mattress is divided into single and double models. Structurally, the basis for a single bed is an independent bent strips, fixed on the frame with the help of lato-holders. The double slatted base for the bed is equipped with an additional transverse rail that eliminates deflection and two rows of latoflexes.

The design of the mattress stand can be equipped with supporting legs and transformation mechanisms. Single stands have four supports, double models have additional central legs.

Some models of mattress supports have the function of adjusting the rigidity of individual zones. To regulate the degree of rigidity, the bases are equipped with special clamps that allow you to connect the lamellas.

The standard length of the mattress stand, which has received the greatest popularity, is 2000 mm. The furniture market also offers less popular non-standard sizes - 2050.2100 and 2200 mm. For children's and teenage beds, lattices with a length of 1700 to 1900 mm are provided.

Standard lattice width:

• for a single bed - 700 mm;
• for double models - 1200,1400,1600,1800,2000 mm.

How is the frame of the base of the bed with slats

A bed with an orthopedic base can have a metal or wooden frame. In addition to natural elasticity, wooden lamella frames are distinguished by their low weight and a large selection of modifications. The wall thickness of the metal frame is 1.2 or 1.5 mm. Metal frames are characterized by a longer service life and high strength. The service life of a metal frame reaches 20 years.

As a rule, metal bases are a welded one-piece structure. Therefore, metal frames lose to wooden counterparts in terms of mobility.

The method of fastening the rails to the frame depends on the type of frame. Yes, in wooden structures fastening is carried out with the help of special tips-holders fixed to the frame with furniture staples or rivets. In metal models, special stands are used to fix the rails, mounted in the frame.

Bed slats - what are they, selection rules

Curved laths or lamellas are elements made of natural glued wood and located at a given distance from each other. The mechanism of action of the frame of lamellas is as follows: when the body presses on the mattress, the load is transferred to curved lamellas, which, due to depreciation, reduce the back pressure of the compressed mattress on the body of a sleeping person. The lattice design allows not only to properly distribute the load on the human body, but also significantly extends the life of the mattress.

Lamellas for orthopedic bases, as a rule, are made from such tree species as:

• Birch.

Beech lamellas are characterized by high elastic qualities, which enhances the orthopedic effect of the bedding. The disadvantages of beech include the higher cost of the material.

Birch slats bend well, however, the springy effect of birch slats is somewhat lower compared to beech counterparts, since the tree has greater rigidity. But at the same time, the cost of birch lamellas is much less.

There are two main types of lamellas:

• narrow - the standard width of the plates is from 3 to 4 cm;
• wide - the width of the lamellas is from 5 to 7 cm.

The bases with narrow lamellas belong to the price segment above the average. The method of attaching narrow rails to the frame (through a lamella holder) helps to suppress squeaks and increase flexibility, so that the lamellas perceive the load better. Narrow slats work well with mattresses whose spring density varies from 200 to 1200 units per square meter.

Wide slats according to the method of fixing to the frame are divided into overhead and mortise. The disadvantages of the latter include the appearance over time of squeaks and deformations of the mattress flooring surface at the junctions of the rails with the frame. The key advantage of wide lamellas is the affordable price.

In bed bases, the slatted components can be positioned at different distances from each other. How to choose an orthopedic bed base? The choice of lamella system directly depends on the type of mattress. For a springless design of bedding, an orthopedic base with slats located at a distance of 5 cm from each other is suitable. For spring mattresses Pocket Spring requires a frame with bent plates at a distance of no more than 3 cm. For Bonnel mattresses, the distance between bent rails is not of key importance.

When choosing the number of latoflexes in the rack base, it should be remembered that the greater their number, the higher the flexibility and anatomical properties of the frame for the mattress. The most popular are the bases for the bed with the number of rails from 26 to 30 units. The smaller the spacing of the lamellas, the longer the life of the mattress.

Types of lat holders in orthopedic bases

Fastening of latoflexes to the base frame can be carried out using the following types of lato-holders:

• invoices;
• mortise;
• shooting.

Overhead and mortise clamps are designed for metal frames. Overhead are a mounting box equipped with two pins. Lato-holders are put on each side of the bar and "snap" into the base frame. Mortise elements for attaching armor are a box with a fixing rim.

Shooting armor holders are used to attach rails to a wooden frame. The design includes a mounting box and a corner holder. The fittings are put on with the holder down on each side of the curved plank and fixed with a stapler on a wooden base.

According to the material of manufacture, clamps for armor are:

• plastic;
• rubber;
• polypropylene.

Polypropylene and rubber lat holders have become very popular, as they exclude the occurrence of bed creaking.

Thanks to the springy effect of the lamellas, the quality of the bed is improved. An orthopedic bed base is a necessary attribute for a healthy sound sleep.

If you have any questions or suggestions, you can contact us at e-mail: [email protected] website
P.S. We do not sell furniture, we only help you get acquainted with what happens and navigate in the choice.

Many people face this choice when it comes time to buy a bed. The question arises, why buy an orthopedic base when you can get by with an orthopedic mattress?

If you decide to improve your body, choose a bed with an orthopedic base.

Buying good orthopedic mattress is a profitable investment in your comfort and well-being.

In this article, we will answer this question and tell you what are the advantages and disadvantages of the grounds, what to look for when buying.

There are two categories for beds: flat solid and orthopedic slatted.

1) Flat solid is a surface made from planed boards, plywood or chipboard (made from pressed wood shavings). Treated with protective and decorative means attached to the frame. The solid base is heavier than orthopedic, less mobile. And most importantly, it does not allow the mattress to reveal all its orthopedic characteristics and capabilities. Thus, sleep worsens.

Such a base interacts worse with the mattress due to poor ventilation, therefore, its service life is reduced.

2) Orthopedic slatted bed base is made of metal or wooden frame With lifting mechanism and legs, wooden lamellas, which are attached to it with lat holders.

Lamels are wooden curved planks.

Lamels can be made from the following types of wood:

• Birch;
• Beech;
• Nut.

Birch lamellas are optimal material. They perform their functions adequately and at the same time are cheaper than lamellas from other types of wood.

Walnut and beech lamellas are more expensive, but they are durable and can withstand more weight.

Standard lamella sizes:

• Thickness from 6 to 8 mm;
• Optimum width 63 mm;
• Length according to base dimensions;
• The distance between the lamellas is 70-80 mm, this distance improves the orthopedic effect;
• The optimal number of lamellas is from 11 to 13 pcs.

The slats provide a comfortable and anatomically correct location body.

Such sizes of slats make the bed lighter. They give it elasticity, harmony of interaction with an orthopedic mattress, which allows you to achieve maximum comfort.

The lattice from lamellas maintains loading to 150 kg.

All orthopedic bases pass all mandatory strength tests.

Design features of a bed with an orthopedic base

In addition to these advantages, this design allows the bed to be more mobile, which will significantly save space in the car when moving, and facilitate unloading and loading.

This option is well suited for a rented apartment, motels, hotels.

Sleeping structures with such bases are disassembled and assembled without much effort, the following elements are separated from the frame:

• Sleeping place;
• Legs;
• Upper base with lamellas;
• The lower part, with drawers for linen.

The disassembled structure can be transported by car.

Such designs are equipped with a lifting mechanism, have the ability to compactly store things and bedding.The legs are detached, the slats are pulled out of lat holders , remains a metal frame with a mattress.

All other parts of the structure are compactly folded into a box.

Designs are available in 2 types:

1) Without stiffness adjustment;

The base of the bed without the ability to change the rigidity of the slats.

2) With adjustable stiffness (a very important, at the same time convenient feature for double structures).

This function is convenient for a bed on which people with different weights sleep.

Using the adjustment, you can adjust the rigidity of the orthopedic base, individually for each person lying on it. There are 7 hardness zone points:

• Head,
• Shoulders
• Back,
• Hips,
• Lap,
• Feet.

Bed with the ability to adjust the rigidity of the slats along their entire length.

To the base of the bed, it is important to choose the right mattress. Orthopedic mattresses are made with different fillers. These are mainly springs, horsehair, coconut coir, natural latex.

All these fillers do not cause an allergic reaction, are well ventilated and moderately elastic, which creates the maximum effect for a comfortable sleep.

Dimensions

The length of the base should be 20 cm more than a person’s height, the width of a single base should be at least 80 cm. Such dimensions allow you to comfortably sit on the bed.

A bed with such dimensions does not take up extra space in the room.

The legs are made of high-strength metal, the most convenient length of the legs is 24-25 cm. The height of the base depends on them. The stability of the structure is ensured by the number of legs (there are up to 7 of them on the frame).

To strengthen the structure, a central frame runs in the middle.

The total height is 27-28 cm, it all depends on the manufacturer. The lamella grid serves to properly distribute the weight on the mattress and prolong the life of the mattress.

Choosing an orthopedic base

When choosing, you need to pay attention to the following factors:

• The quality of the lamellas (they should not have large knots and cracks);
• The base should not creak, creaking causes discomfort;
• The metal frame should not have rust, chips and scratches;
• Wooden bases should not have loose holes for fastening, sharp raw edges;
• Complete set of accessories;
• Lamels should not have chips;

An important criterion is the brand of the product, because the quality of the product depends on the comfort of sleep, the service life of the orthopedic base.

The details of fastening the slats affect the price and quality of the bed. The slats are attached to the base -lat holders.

Lato holders are fasteners designed to hold the lamellas in the sleeping structure.

The slats are attached with the convex side up. They are rubber and plastic. Rubber is more flexible and more expensive.

Plastic lato holders are cheaper, but more rigid and durable than rubber ones.

Orthopedic bases are produced with a lifting mechanism. Mechanisms are divided into several types.

1. The manual mechanism is reliable and has more long term services than all the others, but inconvenient, because when opening, you have to hold the base and the mattress at the same time.
2. Spring-loaded, difficult to rise, but does its job well, over time it has to be changed due to the fact that the springs are stretched.
3. Gas shock absorbers open smoothly and silently, mainly used to lift heavy bed structures.
4. Lifting mechanism with electric drive - it is convenient to use, it is set in motion by the control panel.

Lift beds can be equipped with linen drawers, thereby saving space in the bedroom.

Legs are made of high strength metal comfortable height, which can be easily detached and attached to the bed frame, ensure the stability of the entire structure and additional mobility of the bed.

Orthopedic base with adjustment

There are two types of adjustment.

1. Adjusting the stiffness of the lamellas.

This adjustment allows you to adjust the bed to your weight.

2. Adjustment of the upper and lower parts of the base.

This type of adjustment will allow you to comfortably enjoy breakfast, ensure the outflow of blood to tired legs, laying them at an angle.

From such functions, reliability and durability are not lost, because manufacturers take into account all necessary points during testing.

Summing up

The advantages of classic beds with a solid base are that they are designed for a greater weight of a person than with an orthopedic lattice and are more stable due to their weight.

The disadvantages of the bases of such beds are that they are more bulky, less mobile, they have a shorter life of mattresses, they are more difficult to repair than beds that have an orthopedic base.

Beds with an orthopedic base also have a number of advantages and disadvantages.

The advantages of such beds are much greater than the disadvantages. They p designed for weight up to 150 kg, l light in weight, m ​​plentiful, b dismantled and assembled quickly. Is inthe ability to adjust the rigidity of the bed individually. There is a largevariety of designs, wwide price range.The frame can be used independently of the bed. The beds supplied with the lifting mechanism are convenient in operation.

In the manufacture of such beds are used modern technologies, which expands their capabilities and gives additional comfort.

The only downside is that these bedsdesigned for less weight.

If the sleeping person weighs more than 90 kg, then you need to use narrow slats, wide ones are suitable for people with less weight. Some manufacturers of bases also produce mattresses. It is recommended to choose mattresses and bases from the same manufacturer.

Additionally, you can get a discount on products.

Pay attention to completeness, legs are ordered separately from some manufacturers. To feel the full effect of an orthopedic mattress, you first buy a mattress, then a base under it. If you don't have enough money to buy suitable option, in many retail outlets you can get a loan, thereby you will make long term investment to your health.

An additional advantage of the orthopedic lattice is a quick repair.

Instead of a broken lamella, you can always order a product right size, buy in the store. Many sellers offer free shipping to their customers.- this is another nice bonus.Sellers and manufacturers who value their reputation always meet the needs of customers and exchange goods in the event of a manufacturing defect.

Remember: a high-quality, correctly made orthopedic base is the key to a healthy sleep.

VIDEO: Instructions for assembling a bed with an orthopedic base.

Choose the width of your lamella Orthopedic bed slats(latoflex, armor), or as they are also called bed slats, are birch veneer glued in several layers and specially cut, so that it forms oblong plates, they are pressed at a certain angle and resemble plywood strips. Each lamella has an equally curved shape, which allows them to perform the orthopedic function of a spring, which straightens when pressed on it, and rises back when getting out of bed.

Bed slats - material and production methods

Nowadays, veneer is usually obtained in two main ways.
sawing and planing. In accordance with the method of production is set and the cost of the material. Veneer made by sawing has a higher quality and, consequently, a higher price than planed veneer. The manufacturing technology of our bed slats according to GOST includes a whole range of complex operations, which include manufacturing processes using high-tech equipment by sawing to obtain a product premium. The main raw materials for the manufacture of latoflex are birch and beech. Beech is a rather expensive material, so birch latoflex is in greater demand and use, and in terms of quality it is practically not inferior to beech.

Today, buying slats in Moscow is not a big deal, so before you make a purchase, read, spend five minutes of your time and find out what quality your bed slats will be so that you don’t return to this problem again in two or three months. And remember, our high-quality lamellas are the cheapest!

Below are orthopedic armor in different sizes in length and width, so as not to get confused and not look for the right one for you for a long time, go to the MAIN PAGE and select the necessary slats individually, initially taking its width as a basis.

High-quality base - a guarantee of reliability and durability upholstered furniture. Today, in the production of sofas and beds, wooden lamellas are used, which have successfully replaced the iron mesh. These are curved wide slats made of soft woods that form an elastic bed for placing the mattress. Latoflex, or armor, enhance the orthopedic effect of a bed or sofa, increase the comfort of upholstered furniture. The online store site sells wholesale and retail high-quality lamellas (latoflex) different sizes at a bargain price.

Range of sizes

We offer quality products from dry birch veneer from a domestic manufacturer, manufactured in accordance with the highest standards. In the catalog of the online store you can choose and buy furniture lamellas of the required size in Moscow:

1. rail width - from 38 to 83 mm;
2. in length - from 57 to 152 cm;
3. in thickness - from 8 to 12 mm.

The products presented for sale are ideal for completing modern sofas and beds, including accordion-type sofas with a French folding bed mechanism. By choosing the right size of the slats, you can reduce production waste to a minimum, as well as fit the base to the frame as accurately as possible. Qualitatively made lato-holders do not creak, do not deform over time, easily adapt to the natural curves of the human body. On our website you can buy retail latoflex for furniture standard dimensions, as well as products of increased length, width, rigidity.

Or a sofa, and a bed as a bed, ask the question what are slats, then, probably, not everyone will give the right answer and will be sincerely surprised when they find out that this is what modern lattices for a bed frame are called. They are currently different appearance from those traditional springs that were used in the production of bedroom furniture not so long ago.

Wooden bed frame with slats

Double bed slats

The fastening of the slats to the frame is provided either by a special holder-tip (often a plastic, rubber, polypropylene holder is used), which is fixed to the frame with furniture brackets or rivets, or each slat is directly placed in a special metal frame-stand. Some types (with an internal lamella) have pre-drilled holes for fastening holders, as a result of which there is no need to use rivets, which increases the degree of reliability of the entire structure as a whole.