How to make a dressing room compartment door. We make a compartment door for a dressing room with our own hands

One of the heroines of the notorious film claimed: “What difference does it make where you sleep? The main thing is where your dresses hang.” In this opinion, despite the excessive categoricalness, there is a considerable amount of truth.

We make our own sliding doors.

Dressing room: luxury or necessity

Things also need living space, just like their owners, so a special storage room is not a luxury.

Advantages:

• order - it becomes possible to sort things by season, material, frequency of use and level of wear, as well as separate the clothes of one family member from the things of another. Support established order in private room much simpler than in several, densely filled nightstands;

• service life - properly stored things do not lose their shape and do not undergo deformation, therefore the service life of products increases;
• access - shirts, jackets and trousers disappear, laid on the back of a chair under the pretext of what to wear tomorrow anyway. Free access to any thing saves both time and nerves;
• saving space - a dressing room, even if it was necessary to fence off part of the room for its organization, allows you to get rid of the mass of small pieces of furniture used for storage. In the dressing room, every cubic centimeter is used up to the very ceiling: you just need to choose the right equipment.

Flaw:

• in order to build a dressing room with your own hands, time and effort are needed.

Dressing room organization

• Pantry or niche - this option requires minimal cost. Need accessories: racks, hangers, drawers and doors. It is recommended to install sliding ones: the swing design is much more difficult to install. In the photo - sliding, closing a niche.

• Part of the room - if there are no such premises, then you can use the living room. The minimum dimensions are 2 square meters. m. at a depth of 1 m, do not reduce the room to a critical value, and the ability to fence off the corner allows you to change the proportions, while maintaining a sense of perspective. There are two ways to fence off a room: by installing plasterboard walls or sliding doors as a partition. The last option is easier to implement with your own hands.
• Attic - a dressing room can be arranged both at a low and high wall. It is recommended to use not cabinet furniture, but shelving and racks, so as not to visually reduce the space. In the same way, you can equip a niche under the stairs to the second floor.

Before you start making compartment doors for a dressing room with your own hands, you need to consider what type sliding system they must have. After all, the choice of the necessary building materials and the final cost of all works.

There are three types of sliding systems for compartment doors:

• aluminum frame and guides - this ensures the smooth running of the doors;
• doors and frame are made of steel, steel guides are attached above and below;
• the bascar system is the most cheap option. Only one material is used for the door, for example, laminated chipboard. This type of sliding system has no frame.

The choice of a sliding system depends entirely on the tastes of the owner and his financial capabilities.

At the same time, sliding wardrobe doors for a dressing room are not the only option. A folding accordion door can also be an excellent solution.

Door manufacturing

Making sliding doors for a dressing room with your own hands is quite simple. Experts recommend choosing the lightest and most malleable building materials. After all, without professional equipment and experience to make with your own hands, a door leaf made of durable glass or using sandblasting is almost impossible.

The door frame is easiest to make from quality wood: apple, poplar or pine. The wood must be well dried, otherwise, when shrinking ready product may deform.

Various plastic sheets can be used as inserts, acrylic glass or paper. Using paper, you can imitate Japanese-style partition walls.

Making a compartment door with your own hands is carried out in stages:

• necessary measurements are made;
• a drawing of the door is created;
• the door frame is assembled, which is then fixed with special screws;
• rails are attached to the frame and, if necessary, the structure is painted or varnished;
• a decorative insert material is installed on the finished sashes. In this case, it must be borne in mind that plastic is fixed with screws, and paper or fabric is glued.

Thus, you can make compartment doors for a dressing room quickly and efficiently even with your own hands.

Decorative design of the door leaf

Compartment doors for a dressing room, in addition to differences in the profile from which they are made, may also differ in filling.

Such doors come with a wide variety of decor:

• one-piece mirrored compartment doors. This option involves the use of silver or bronze-colored mirror surfaces and is perfect for an interior with warm tones or in a retro style;
• doors filled with chipboard. For their manufacture is used chipboard panel, which is made under the imitation of wood and emphasizes the comfort and warmth of the interior. This version of the door has become the most versatile in use thanks to huge assortment shades of decorative coatings;
• full glass filling. Such doors are most often used in places where objects behind the door can be emphasized with the help of transparent glass. Such doors look especially advantageous with the use of internal cabinet lighting. Due to the backlight, the cost of manufacturing the structure with my own hands may increase slightly. The effect is worth the money spent, because the door will look great in a dressing room of any size;
• glass door, decorated with decorative film;
• rattan and bamboo doors;
• the use of artistic sandblasting drawings;
• stained glass pattern made on a glass or mirror surface;
• decorative filling made by combining materials. Such a door leaf can be transparent or opaque in the necessary places, which is very convenient for a dressing room.

Installing wardrobe doors

Do-it-yourself door installation is very simple. First, using dowels, a drill, self-tapping screws and a screwdriver, guides are fixed from above and below.

Under the lower rail you need to insert a stopper. Then a door is brought under the upper rail, after which it is aligned with the lower rail.

In such a simple way, you can install compartment doors in the dressing room with your own hands. Installation will take a little time, but doing it yourself can save a lot on the family budget.

How to reduce the cost of manufacturing a compartment door

Dressing room doors, especially if they are mirrored, can be very expensive in specialized stores. But there are many ways to reduce the cost of the product:

• expensive metal structures can be replaced with cheaper chipboard materials;
• instead of German chipboard is better use the Russian equivalent;
• wood texture can be changed to White color, since white slabs are cheaper;
• invisible fasteners are perfectly replaced with ordinary corners or euro screws;
• if you want to purchase compartment doors, then you can buy non-branded ones, this will significantly reduce their price;
• the best savings will be to buy all necessary materials in specialized warehouses or workshops and self-installation prefabricated doors.

Thus, the cost of compartment doors will be minimal and you can be proud that you have done such work yourself according to your own design.

A separate room, specially designed for storing clothes, shoes and other things, has long been no longer a luxury. Dressing room is perfect solution problems caused by the lack of enough space for clothes, shoes and textiles.

Previously, we tried to buy huge wardrobes, hangers, several bedside tables so that there was a place for things. And still the problem did not go away, because it is enough in very rare cases. Sometimes it’s easier to hang a clean, ironed shirt on the back of a chair in the evening so that it doesn’t wrinkle in a crowded closet until the morning, and you don’t have to iron it again to put it on for work. Hangers at the entrance to the apartment with a mountain of outerwear look, to put it mildly, not very beautiful, and it is inconvenient to use them. Large wardrobes and chests of drawers steal a lot usable space which could be put to better use. That is why you need to equip the dressing room with your own hands in the form of a separate room.

For this mission, you can allocate part of the corridor, if its area allows, a niche in one of the rooms, etc.

• With a room designed for storing clothes, you can forever forget about what a mess that constantly reigned in your home is. Home items can be easily separated from those intended for work or leisure. Jackets will be stored separately from T-shirts and shirts. The clothes of one family member will not intersect with the things of the rest, while creating clothing chaos.
• The service life of clothes will automatically increase several times. All things require that they be properly stored. Reusable folding in a nightstand, constant ironing is not the best way to reflect on the condition of the clothes. This accelerates wear and tear, which in turn leads to unplanned additional costs for buying new things. With a dressing room where everything will be stored properly, this problem will become irrelevant.
• Access to things will be much easier. You won't have to sort through all the shelves to find the right piece of clothing. Now, in order to take what interests you, you will need to open the dressing room and go to the section where the thing you are interested in hangs. A huge plus is that it will not need to be pre-ironed before dressing.
• If there is a separate section of the room intended for clothes, there is no need for chests of drawers, bedside tables, cabinets that have the same purpose. In a well-equipped dressing room, the entire space is used, from floor to ceiling. Therefore, it is really possible to fit everything into it, and it will be possible to get rid of the empty furniture and thereby free up several square meters.

Not without flaws, but, fortunately, he is only one. To make sliding doors with your own hands, you need to spend quite a lot of work and time.

The choice of material for the manufacture of compartment doors

To assemble compartment doors, the following main types of material are used:

• Wood. This is a durable, mechanically resistant material that can bring comfort to your home and decorate the interior.
• Sliding plastic items. The advantage of plastic is its price, the disadvantage is its fragility and instability to shock, which is very important for families with small children.
• Glass compartment doors look very nice and bring their zest to the interior. It is recommended to take impact-resistant glass, as it is dangerous to use ordinary glass.
• Compartment doors, made in the form of a mirror, perform two functions at once. This material is chosen by the majority for installation in the dressing room.

If you plan to make sliding structures from scratch with your own hands, then you need to choose materials that can be easily processed at home and do not require additional complex equipment for this.

Preparing to install sliding doors

Do-it-yourself work on installing compartment doors begins with preparation. First you need to decide on the place where you want to make a dressing room. Much will depend on this, for example, how many doors will have to be installed for convenient operation.

Next, you need to make accurate measurements of the niche, corridor or room where you plan to install compartment doors. The number of wings will depend on the width. If it does not exceed two meters, two moving doors will suffice. With a width of two to three meters, one fixed leaf can be added. If the distance is more than three meters, two movable sliding doors and two fixed ones should be made.

The mechanism for the sliding system can be made by hand, but it takes a lot of time, availability special equipment and experience in similar work. Therefore, it is recommended to buy it. You can save on door leaves which it is quite possible to make with your own hands. It will be necessary to buy slats for the frame and material for filling compartment doors in a hardware store.

How to install sliding doors with your own hands: workflow

• Based on the measurements of the opening, we determine the size and number of doors for compartment doors. At the same time, we take into account the filling, frame and elements of the sliding mechanism. It will be best if you prepare the appropriate drawings.
• We assemble the door frame with our own hands and insert the filling, securely fasten all the elements.
• We fasten the working mechanism to the sliding doors, namely rollers, clamps, etc.
• Set the sliding doors aside and proceed to attach the top rail. To do this, you need a puncher, screwdriver, dowels, self-tapping screws.
• Now you need to determine the installation location of the lower rail. To do this, we put it on the floor at the intended attachment point. We take one door and insert it into the upper rail, then into the lower one. Using a level, check the verticality door leaf, if necessary, move the rail. When the result suits us, we mark the place of its attachment and remove the door. Now you can fasten the rail with self-tapping screws to the floor.
• Once both rails are attached, the sliding doors can be inserted.

After completing all the steps, the design is ready for use. The dressing room can be equipped with all the necessary shelves and hangers, and then use and enjoy.

There are many tips for decorating dressing room. The advice to install a sliding door in the dressing room is very popular, because it sets the original tone for the room: something between the closet and the room! Use sliding doors for your walk-in closets, and to find the right door, read on.

Like everything in this world, sliding doors have their advantages and disadvantages and are chosen by someone only based on personal preferences. Therefore, carefully study the pros and cons of "compartment" doors, trying them on your life practice.

Sliding door advantages:

• The compartment door takes up little space due to the fact that it does not swing open, but occupies a clear vertically oriented position.
• The compartment door is decorative. You can decorate it as you wish, it will always look technical and beautiful.
• If children live in the house, then the safety of compartment doors will also be important. Ordinary doors have an opening between the door and the scythe, which often causes minor injuries and other unpleasant adventures.
• Ease of installation allows you to make a coupe on your own, without having special technical skills.

Judging by the pluses, the compartment door is well suited for a small room, as well as for a family with small children.

Cons compartment designs:

1. Leakage of sliding doors is often reproached for them. Things are at risk of smelling of household aromas or soaking in moisture, being in close proximity to the kitchen or bathroom.
2. The noise of some compartment designs also interferes with many, especially if the dressing room is installed in the bedroom of people who do not always start and finish the day in sync.
3. Coupe doors often move off the rails or have other problems during operation. If you decide to save a little on a dressing room compartment, then expect trouble: inexpensive materials are extremely fragile and unreliable.

Considering the pros and cons of compartment doors for a dressing room, it is safe to say that choosing expensive silent designs will save you from the risk of getting unpleasant impressions from the operation of compartment doors.

We assemble compartment doors in the dressing room with our own hands

Assembling a sliding door on your own is not so difficult. It is enough just to buy all the materials according to the available sizes and prepare the tool. AT general view installation work sliding door fit into a simple pattern.

How to assemble a compartment door with your own hands:

• Study the technology of the compartment door. This will allow you to schematically imagine what kind of door should be in the end.
• Take accurate measurements of your door opening.
• Using pencil and paper or an online designer, create a model of the future door, taking into account all the dimensions of the room.
• Having decided on the size of the components, you can go to the store for shopping. Provide the consultant with your scheme and ask him to choose the most convenient option for self assembly.
• Using a paper diagram or a video tutorial, assemble the resulting "constructor" in your doorway.

Be sure to consult with a specialist regarding the installation of a sliding door. Perhaps some of the nuances may slip away from you without the help of an experienced person.

How to use mirrored wardrobe doors

The mirror on the compartment doors is very often located. The reason is simple: the compartment door occupies almost the entire vertical from floor to ceiling, while being perfectly flat and even quite wide. Use mirrored doors for the dressing room, given some of the features of this room.

Thinking over the design of a dressing room with mirrored doors, pay attention to the following:

1. If your dressing room is combined with a bedroom, then take the trouble to exclude the possibility of sleeping in front of a mirror. Both psychologists and superstitious fighters for the truth argue that sleep and the waking state should not be subjected to self-criticism.
2. If it is inconvenient for you to place the mirror on the outside of the dressing room, then you can move the mirror accent to the inside of the dressing room. This will be a great option that will allow you to quickly evaluate outfits and not mix this process with sleep, food and other unsightly activities.
3. If the mirror should not have a functional role, then you can leave the door as usual, highlighting only a picture or a small part with a mirror surface.

Mirrored compartment doors will look advantageous, visually expanding the space.

Original semicircular compartment doors for the dressing room

If you decide to organize a dressing room in the corner of the room, then you probably thought about which door is better to make: straight or semicircular. The second option gives several undeniable advantages that make you lean towards semicircular doors.

Advantages of semicircular or radial compartment doors:

• Such a door looks very stylish and creative, it helps to emphasize the originality of the layout and the owner.
• Rounded lines soothe and harmonize, according to Feng Shui practice.
• Radial doors visually increase the room, give it texture and volume.

Choosing semicircular doors for the dressing room, you find not only convenience for the dressing room itself, but also a beautiful design decision for the whole house or apartment.

Sliding doors for dressing room Leroy Merlin and other manufacturers

Unlike buying and installing sliding wardrobe doors on your own, purchasing custom-made doors is a very easy and even pleasant task. Companies such as Leroy Merlin and other well-known trade marks can be justly proud of their comprehensive service, high quality and reliable. If you do not aim to save on the arrangement of the dressing room, then contact the professionals who will do all the “dirty” work themselves and you will have a beautiful door from the manufacturer in your house or office as soon as possible.

What are the advantages of applying to the company:

1. speed;
2. quality of work;
3. quality of materials;
4. guarantees;
5. flawless result;
6. matching in size and style.

If you apply to a company that has already earned the respect of many customers, then you have every reason to believe that you have not wasted your money by investing in this business.

How to choose and install compartment doors in the dressing room (video)

The room in which the dressing room is planned should not be affected by the fact that from now on it is adjacent to the dressing room. On the contrary, it should benefit from beautiful sliding doors, technical and attractive.

Design of sliding doors to the dressing room (photo examples)

Sections of the article:

The ability to place things in a separate dressing room is undoubtedly an essential convenience. All things are arranged neatly and with such a systematization, finding something you need is quite simple. In addition, clothes last longer and better. appearance. However, if the house does not provide such a room, you can quite simply build it yourself. This is easy to do by installing coupe-type doors in living room, thus separating them a little space under the dressing room. A sliding door system will make it easy to save the available space and add some lightness and elegance to the space.

Sliding door types

When deciding to install in the dressing room door mechanisms with a sliding system, you need to determine which type of door will suit you the most. There are several types of sliding doors for the dressing room, differing in the principle of operation and installation method. They are:

• compartment type;
• Techno;
• Pencil case;
• Book;
• Harmonic;
• Rotary.

When choosing specific design should take into account the presence free space for opening and closing the selected type of door mechanism, rationality of installation and cost aspect.

compartment door

The principle of operation of the design is to move the canvas with the help of roller mechanisms parallel to the wall. In such a system, one of the doors drives over the other. Roller mechanisms are equipped with bearings, which ensures smoothness and ease of movement of the door, as well as noiselessness during its use. Guide rails are mounted at the top and bottom of the structure.

A product of this type of execution is relatively inexpensive. However, the disadvantage of such a system is the presence of a threshold in the form of a lower guide rail. During the operation of the sliding wardrobe doors, it will need to be stepped over and periodically cleaned inside from accumulating dust and litter to ensure the functioning of the roller mechanisms.

techno

The design is one of the varieties of compartment doors. A feature of the system is that only the upper guide rail is used for its operation. You can fix the element both on the wall and on the ceiling plane. A significant advantage of doors of this "hanging" type is the absence of thresholds and noticeable savings space.

Pencil case door

Such a system is quite controversial, since it has both one significant drawback and many advantages. The advantage of this design is that when opened, the door leaf is completely hidden in a special compartment in the wall, leaving absolutely free passage. The disadvantages include the very fact of the need to equip a special false wall of the same size with the door leaf. Another option may be to make an additional lining to the existing wall, which will undoubtedly take up a significant part of the space and will not always look aesthetically pleasing.

In the manufacture of a false wall structure, special closer mechanisms are used to ensure that the door leaf stops in the right place.

Mechanism "book"

Compartment doors for a dressing room of such a plan are similar to the “techno” door in terms of the method of fastening, since they have only an upper guide rail. The door leaf itself consists of two wings that fold when opened like a closing book. Doors of this type have an interesting spectacular appearance, however, when installing them, one should take into account the possibility of providing the necessary space for the folded mechanism when fully opened.

Harmonic

Door leaf design of this type virtually identical to the mechanism of the book. However, in this product, the door leaf consists of several wings and, as a result of opening the doors, it folds up, forming the appearance of accordion furs. When installing such a system, you should also take into account the availability of sufficient space for opening the sashes. But, unlike the mechanism of the book, the area occupied by them will be smaller and at the same time somewhat wider.

Rotary door

The product is a very interesting and unusual design. It uses a special rotation mechanism. The originality lies in the fact that when the door leaf is opened, it can not only move from side to side, but also rotate on both sides.

To securely close doors of this type, conventional tongue lock systems are not always suitable, since it moves and rotates freely. For convenience, in this case, you can use a magnetic system.

Location features

Based on the location of the compartment door for the dressing room, they can be conditionally divided into:

• Rectilinear;
• Corner.

Most often dressing room It has rectangular shape. In such cases, rectilinear type compartment doors are mounted at the entrance. However, in some cases, when the corner part of the room or room is allocated for the dressing room, it is necessary to use a corner-type sliding door system. Each of the systems during installation has a number of peculiar features.

Materials for the manufacture of sliding doors

In the course of manufacturing a compartment door for a dressing room with your own hands, it is possible to use a wide range of materials and their combinations. So, to create a canvas, it’s suitable: natural wood, aluminum, veneer, MDF, laminated chipboard, plastic, mirrors and glass. The main requirements in the process of choosing a material for a product are its practicality and compatibility with common style interior.

So, in rooms with a seasoned classic design best solution will use natural wood. It is possible to use a combination technique in the form of adding glass, mirror or stained glass elements.

good budget option is the use MDF materials or chipboard. With a wide range of shapes and color solutions, it is quite simple to make a sliding door to the dressing room suitable for almost any style. MDF doors with book or accordion mechanisms look best.

Brightness and originality can be added by designs using colored plastic, glass, metal and mirrors in various combinations. Also, the glass itself can have a matte finish or a special pattern. Thanks to the use of special technologies in the sliding door for the dressing room in the process of manufacturing glass panels, such a product will become not only a wonderful decoration of the room, which can be seen by examining various photos but also very safe. In case of damage to the canvas, the fragments will be held by a special film coating and will not crumble to the floor.

However, it is worth remembering that despite the significant advantages of glass and mirror elements, including visual lightening and space expansion, the manufacture of sliding door panels from them is a rather costly and time-consuming process. Working with such materials requires significant skills in terms of the basics of manufacturing sliding wardrobe doors, as well as the use of specialized tools in the process.

Making a sliding door with your own hands

Given that the structures such as pencil cases and doors with a rotary mechanism have a very complex design, it is better to entrust their manufacture and installation to professionals. And for self-arrangement of the compartment door for the dressing room, you can apply the design of any other type. The process of assembly and installation of the structure itself consists of several important stages.

After choosing the type of construction, it is necessary to measure the wardrobe opening into which the sliding mechanism will be mounted. For the accuracy of measurements, it is worth using a level and a plumb line. To measure horizontal values, a level and a tape measure are used. Using a plumb line, the height is calculated. It is also necessary to make measurements in the corners of the doorway and in the middle.

According to the calculations obtained, a project diagram is drawn to determine the amount of necessary building materials. With the existing dimensions of the dressing room opening of 100 mm or less, 1 door will suffice. For dimensions not exceeding 200 cm, optimal solution is the manufacture of a two-door design. And in the case of a large doorway, it will be convenient to install additional fixed-type canvases.

The frame part of the canvas in the compartment door for the dressing room can be made of aluminum profile or a bar with dimensions of 2-2.5 cm. The use of a bar simplifies the work compared to aluminum, however, the disadvantage of the material is the need for additional processing and painting or varnishing. To fix the web filler, slats are needed.

In the process of assembling the door leaf, it is imperative to monitor the evenness of all corners and correct them in time if necessary. Based on the type of construction chosen, it is also necessary to purchase a profile from aluminum alloy for the procedure for framing the edges of the door leaf, a suitable filler (often it is chipboard or small sheets of plastic). Also, you will need roller mechanisms with travel stops, guide rails and suitable fittings.

The very principle of mounting the roller mechanism and rail, in most cases, is described in detail in the accompanying instructions for the relevant products.