DIY decorative benches for the garden. How to make a bench: original ideas (drawings, photo reports)

28.03.2016

Spring brings sunshine and warm days. It's time to update your garden furniture so that you can enjoy the outdoors with pleasure. After all, nothing decorates the garden like brightly and originally decorated garden sofas, tables, deck chairs and flower stands. How to create stylish decor on your own garden furniture? Aerosol paints will help you and Craft Spray, as well as 50 ideas on how you can easily achieve amazing results. Let's watch!

This dinner table and the wooden pallet sofa look amazing! Contrasting combinations of bright colors, decorative pillows and fluffy caps of flowering petunias complete the original image of this terrace.

That's so creative garden table can be crafted using old tires and spray paint. We thoroughly clean the surface of the rubber, degrease it and spray it with spray paint. You can paint tires in one color, or you can use different ones. Then we install them one on one, fastening with glue. On top - a countertop, and the table is ready! Simple yet effective at the same time!

Garden furniture can become bright accent your terrace. Paint in spray cans of different colors will help. Give each chair an individual bright shade - and the garden group, as they say, will sparkle with new colors! Your guests will definitely like this original approach.

In order to freshen up the terrace, you will need a couple of cans of spray paint and a little of your free time. In this case, paint of two shades is chosen. One sofa is painted blue, as well as drawer table; the other sofa and the rest of the table are white. Accessories are matched to the tone of the paint. Simple and tasteful!

From wooden pallets, you can easily make a real decoration of the terrace, garden patio and even country house. The pallets are protected, primed and spray-painted, then combined to create beautiful and handy items interior. Such a garden sofa is complemented by a soft mattress of a suitable shade, as well as bright decorative pillows. On the table are decorative elements painted to match. Designer furniture is ready!

Making an original flower rack is easy and simple. Paint the drawers in bright colors and set them one on one. Place flowerpots inside. By the way, children's buckets, watering cans and vases, also painted in bright contrasting colors, can play their role. The bookcase is ready to please the eye with flowers - plants and colors!

You have old chair? Do not rush to sacrifice him to the fire. With the help of spray paint and your imagination, it may well find a second life and serve you faithfully for many years to come. It is only necessary to carefully sand the old tree, prime it and cover it with paint of a suitable shade. The seat can be left firm or soft with foam and brightly colored fabric.

This old chair has been turned into a creative flower stand. Furniture frame pre-painted brown paint, a kind of planter was made from the seat with the help of a grid, fixing the soil and the plant. The original lawn decoration is ready!

When decorating garden furniture, choose contrasting shades. Such combinations look fresh and perfectly emphasize the bright colors of summer. Tables, chairs, benches, sofas and armchairs - with the help of spray paint, each object can be given its own unique character. For example, such a garden group will definitely surprise and delight your guests.

In such a bright sandbox, your little ones will play with great pleasure. It can easily be made independently from the boards, after which it is good to paint over them. This will protect the wood from weather, moisture, insects and rot. Such a cute sandbox will serve the kids for a long time!

A wooden fence after winter can be easily refreshed with spray paint. The wood must be well sanded, covered with primer, and then sprayed with paint. Contrasting shades perfectly emphasize the bright colors of summer.

Folding metal tables and chairs can also be painted. Crafts Spray paints, for example, have excellent adhesion to metal surfaces. It remains only to choose a pleasant shade. Bolder! A wide palette of colors will help to realize any of your creative ideas.

Pallets and cable reels make a great garden group. You can leave coils and pallets in their natural state, with spectacular cracks and scuffs - in accordance with the loft style. Or you can paint the tree with spray paints. bright colors. Get fresh and creative. Soft mattresses and cushions will perfectly complement your garden composition.

Wooden pallets will also make an excellent bar counter for those who like to have parties in nature. It is only necessary to sand the wood well, cover it with primer, and then spray it with spray paint of any color. It is very easy to make and the result is beyond expectations!

Pallets also serve as spectacular flower walls. In this case, they must be painted to protect the tree from moisture and insects. When choosing a paint color, be guided by what flowers you plan to plant on your wall. With the color of the pallets, you can emphasize the natural colors of the plants.

A do-it-yourself chest of drawers for shoes will be perfectly refreshed by bright paint. In this version, wooden boxes painted red served as the basis for the product. For such purposes, it is easy and convenient to use aerosol paint. It is only necessary to spray the composition on the prepared surface and wait for it to dry.

Nothing can decorate a garden corner better than comfortable furniture. And if you can still do garden group on your own, painting it with bright colors, then your garden will find comfort and its own unique character.

In this photo, a platform is built from pallets. In some places, the boards have been taken out and flowerbeds have been made. A decorative wall for flowers, a table, a chair and the tray itself are painted with the same color paint. Stylish, original and with character. In such a corner it is pleasant to relax and unwind.

What can please your children more than children's house in the country? It is easy to make it yourself from the boards. Be sure to paint the tree with paint to protect it. Choose bright sunny colors! Let your children be happy and comfortable in such a house.

A wooden pallet treated with sandpaper, primer and covered with paint will serve as an excellent bookcase for flowers. By the way, plants can be planted not only in flowerpots, but also in ordinary glass jars! And if you also paint them, as well as apply patterns, the whole structure will become a creative decoration of the hallway or terrace.

Wooden pallets, crates and boards can be used to create great design pieces to decorate your garden. A little imagination, bright paint, live plants - and now you can't take your eyes off the original decor item!

Your child will appreciate this design - you can lie down, sit and relax after stormy games. Nice texture natural wood, a delicate shade of paint and decorative pillows give this lounger a special charm.

But these pallets, painted with bright colors, serve as a real decoration of the facade. Plants placed in unusual flowerpots perfectly decorate the stone surface. Easy, simple and original!

This table, made in-house from wooden pallets, is painted in the colors of the British flag. Like? Making this is as easy as shelling pears: you will need masking tape, old newspapers and paint in spray cans of three shades. We glue the adhesive tape and cover the areas that do not need to be painted. We apply paint, wait for drying and carefully peel off the adhesive tape. Paint the rest of the areas in the same way. The table is ready!

To make such a sofa for the terrace is not so difficult. Pallets are stacked as needed and fastened together. We paint the structure with paint that will help protect the tree. From foam rubber and bright fabric we sew mattresses and decorative pillows. Now you can relax on a freshly made comfortable sofa!

Feel free to experiment with color, updating garden furniture. Bright and contrasting shades and combinations will look spectacular against the backdrop of lush greenery and natural colors summer.

With the help of masking tape and stencils, as well as paints of different colors, you can create any drawings and compositions on furniture. Fresh paint will literally transform your garden furniture, making it bright and attractive.

Another interesting technique that will allow you to transform your garden furniture and breathe new life into it is decoupage using napkins and cards. The main thing is to degrease and prime the surface, and then stick the cutout on it and fix the result with varnish. In the photo, the old stool has been updated with decoupage.

After winter, garden furniture does not look the best. However, this problem can be easily fixed with spray paints. Get creative: paint each chair a different color. Now the garden set has literally sparkled with new colors!

Choose bright colors for painting. Against the backdrop of lush summer greenery, your garden furniture will look impressive and attractive. Accents can be created with decorative pillows. Both beautiful and comfortable!

So nice to relax on the terrace in comfortable sun loungers! By the way, they also do not hurt to update after the winter. Maxi Color spray paints are perfect for painting a metal frame. rich color palette will give you the opportunity to easily choose the color of the furniture in accordance with your plan.

Such a cute decor on the table is easy to do on your own with the help of spray paint and masking tape. On a cleaned and degreased surface, apply white paint We are waiting for it to dry completely. Then we glue strips of adhesive tape, creating a pattern, and apply paint of a different color on top of everything. After it dries, carefully peel off the tape and enjoy the result.

This garden sofa made from pallets is spray-painted in a pleasant way. of blue color. The nails on it are drawn with a white marker with paint. It turned out beautiful and original. Decorative elements complete the bright image.

A comfortable garden set will allow you to enjoy outdoor recreation. Against the backdrop of fresh greenery, bright contrasting colors of chairs and a table look great. Don't be afraid to experiment with different shades. Look for and remember your favorite color combinations!

But if you can not decide on a bright shade - choose white. Against its background, colored decorative elements look great with which you can decorate your furniture. Get stylish and fresh!

Plastic furniture on the terrace or near the house can be decorated in an original way on their own. You will need masking tape and paint of your choice. We glue strips of adhesive tape, then spray paint on top and wait for it to dry. We carefully peel off the strips - and now the updated furniture is pleasing to the eye! By the way, little advice: choose the color of the paint to match the flowers in flowerpots or pots!

From pallets, you can also get a convenient rack for the kitchen under open sky. Don't forget to sand the wood and then primer and paint to protect it from weather and insects.

Do you remember that old tires should not be thrown away? Here is another confirmation of this. From them you can make small comfortable chairs. We clean the rubber, degrease it and cover it with spray paint. Bright accessories - and you can invite guests!

After winter, garden furniture needs to be cleaned and updated. Maxi Color and Crafts Spray paints are perfect for this purpose. With their help, you can create new images of your furniture that will become a real decoration of your garden.

Such a delicate and romantic painting on a bench is easy to make using decoupage cards or napkins, as well as spray paint. You can also experiment with stencils, decorating your garden furniture with new unusual compositions.

Blue color is great for decorating garden furniture. Do not forget that before painting the surface must be thoroughly cleaned and degreased. The paint should be sprayed from a distance of about 30 cm. It is better to apply several coats to avoid streaks.

Using spray paints in different colors, as well as masking tape and old newspapers, you can easily decorate garden furniture. We apply a layer of paint, wait for it to dry, cover certain areas and apply paint of a different color. You get such a spectacular painting.

garden furniture white color looks great against the backdrop of lush greenery and bright flowers. With the help of spray paint, you can easily touch up any imperfections.

Sometimes it is necessary to paint not only the metal frame, but also wooden surfaces one product. In this case, universal paints Maxi Color and Crafts Spray will be a good choice. They can be used to paint wood, metal or plastic.

Bright fresh colors of garden furniture will highlight the charm of your garden. Feel free to experiment with shades! For example, in this photo bright yellow perfectly set off garden flowers and juicy greens.

In this version, the blue color goes well with brown. Comfort and attractiveness of the garden set give decorative pillows. You can match them to the color of the chairs, or you can, on the contrary, make bright accents.

The pastel colors of Trendy Specials enamels will surprise you with their tenderness. With their help, you can give garden furniture pleasant soft shades. By the way, enamels can be applied without primer, and after drying, do not varnish.

When opening the summer season, stock up on spray paints of different shades. By combining colors, you can achieve such interesting combinations. Bright, stylish and original!

Another unusual effect can be achieved by painting with a color transition - from dark to lighter. To do this, you need to spray one shade, wait for it to dry and carefully apply the second color on the other side, gradually reducing the spray intensity.

And this is an example of what a wonderful result can be achieved with the help of painting with a stencil. In this way, you can create any drawings and patterns on furniture. Looks fresh and original!

If you are thinking of building a bench in the country and want to go beyond the ordinary and create something truly unique, then you are in the right place. We have compiled for you a selection of the most original and unusual designs benches and benches that you can make with your own hands. Moreover, we will show you how the benches are made in the photo.

The most common benches are wooden. And this is not surprising! Wood is the most affordable material for building a bench. The variety of designs here is truly huge! We will give you some examples.

To create such benches, you can use the remains of the cut garden trees. both trunks and thick branches will go into business.

Left in small pieces scaffolding? Having made benches out of it, you will get a beautiful and reliable option.

Even short cuts wooden beam can become in skillful hands unique garden bench.

It is easy to make from quality material, even if there is not much of it. But even from improvised materials, such as, good garden benches are also obtained, as in this photo.

It looks like a bench can be made from any wooden structure. These are made from wooden spools of cable.

It is hard to imagine that you have unnecessary wooden barrels in good condition on your farm. If yes, then here is the garden bench option for you.

Funny garden bench from one log.

If you do not buy a ready-made bench, but make a bench with your own hands, then you have a chance to give it a unique look with very little effort.

Your bench does not have to be completely wooden. Here is a popular simple bench design made from building blocks and wooden blocks.

Probably, most of us would simply throw out the old unnecessary boat, but there are people among us with the ability to see beauty literally in the trash. The bench from the boat in the photo is just wonderful. It may not be very comfortable to sit in it, but you can sit in Turkish. But even looking at such a bench is nice.

Bench for the most daring.

Often beautiful benches do not have a complex design. In this case, individuality and your personal attitude to the garden are more important.

We offer you four basic structures benches, on the basis of which you can create your own amazing and unique benches, which are not yet in any photo.

Small wooden bench: photos and instructions.

This simple bench in the photo is made from just a few planks. These used to be often made in villages for everyday use. It is stable, and most importantly - it is easy to carry from place to place. Such a bench will serve both in the house, and in the kitchen, and in the yard. However, it does not require high costs materials and is very easy to manufacture. The most difficult thing is to make neat cuts in the boards at an angle to get the legs.

It may seem that the sides in front and behind are clean decorative element, However, it is not! It is they who give this bench rigidity and stability.

Therefore, in one form or another, they are present in the design of each such bench.

Sometimes, however, only one such stiffener is left. Then it passes in the middle under the seat.

Large wooden bench with your own hands

If you need a large bench, and you do not plan to move it from place to place often, then this option is for you. This spacious bench is perfect for both indoor and outdoor use. It is made of thick timber, so it can easily support three or four adult riders.

It's not hard to build either. First you need to make these legs.

Then the legs are fastened with longitudinal bars (two at the top and one at the bottom), and a solid massive frame is obtained.

Using such a device, you can drill holes and hide the fasteners on the inner surfaces of the bench parts so that the self-tapping screws do not spoil the look of the product. But if you don’t have one, then you can still make such a shop by attaching the parts in the usual way.

It remains only to assemble the top and attach it to the frame.

Wooden bench without a single nail

And here is an example of a very beautiful and original bench, in which there is not a single nail or self-tapping screw.

It is made very simply, although it requires some special tools. First, all elements are cut.

And then, with the help of clamps and templates, the parts are glued in a checkerboard pattern.

You will need a lot of clamps, including several large ones, so this project is only suitable for those who have an impressive set of carpentry tools.

Items of garden furniture are needed to equip on suburban area resting place of your choice. Photos of benches in the garden look attractive. Any master can make such furniture himself.

First you need to decide on the choice of material for the future product and choose the right design solution.

Work materials

Garden bench can be made from various materials. Each of them has its own advantages.

Plastic bench

This piece of furniture has many advantages. Plastic products are affordable, they do not require special care, they are easy to disassemble and assemble. Today, plastic is presented in rich colors.

However, there are also disadvantages. The plastic item looks cheaper than wooden product. Under the influence of direct sun rays it quickly burns out, and its surface can be deformed.

Wood for garden furniture

To make original benches for summer cottages, craftsmen often use wood. Wood is easy to process, the material looks noble, and installation does not take much time.

The main requirements are the absence of defects and good drying.

stone products

The naturalness of the material is its undeniable advantage; it attracts with its natural beauty. AT finished goods it looks luxurious and stylish.

Items from natural stone easy to make by hand. However, the material has not only advantages, but also disadvantages:

• It is unhealthy to sit on a cold stone.
• The bench is installed exclusively permanently.

What about metal?

Metal benches are a great decoration for a recreation area. The cold forging method, like the hot forging method, allows you to create beautiful designs.

In addition, metal is perfectly combined with glass or wood.

What should be the ideal shop?

Among all the requirements, the main ones can be distinguished:

• Comfort. The bench needs to be ergonomic. A bench with a back is a good option.
• The product must be capable of withstanding heavy loads. The master needs to choose only high-quality materials and accessories.

Bench design features

A summer resident who wants to ennoble the landscape around the house should know how to make a bench with his own hands. You must first determine the dimensions.

Dimensions - 1.5 mX0.4 m, height - 0.45 m (seat) and 900 m (back). The back is made at an angle of 18 or 20 degrees. It is important to correctly execute the drawings of the bench, then the work will not argue.

The master will need to prepare the following:

• Primer, varnish;
• Special sandpaper for wood;
• Screwdriver;
• Electroplaner;
• Electric jigsaw;
• Self-tapping screws 40X40;
• Blanks for front and rear legs, as well as for backrest holders;
• Wooden boards with dimensions 1500X150 and thickness from 35 mm to 40 mm.

Making a wooden structure with your own hands

It's good when you can find boards with the right dimensions on the market.

When suitable option on the construction market it didn’t turn out, the master will have to arm himself with a jigsaw in order to cut the material himself. A miter saw will help speed up the process.

Note!

Finished blanks must be processed. The surface of the boards for the backrest with the seat needs to be sanded. The ends are processed using an electric planer, best option- make them with a rounded shape.

The next step is to give the required angle of inclination, in this case we are talking about the rear legs of the bench. These elements serve as a framework. Marking is applied to the prepared parts.

We measure the height - 0.4 m. It is necessary to make a cut equal to 20 degrees to form the angle of inclination. Between the legs of the bench in front and behind the distance should be 0.28 m. A beam with a size of 0.5 m connects the legs. It is better when the strapping is performed not only from above, but also from below.

The sidewalls are connected as soon as the assembly of the main parts is completed. The boards are fastened with self-tapping screws to the strapping bars that are on top. Between the blanks leave gaps to remove moisture.

When mounting the backrest, the board that comes first is attached at a distance of 0.2 m from the seat, and the second - 0.38 m.

Note!

You can proceed to the final coating of the product. For this, impregnation with varnish for outdoor use is used. Such funds will help ensure reliable protection from any harmful actions from the outside.

How to create a metal structure?

A master can create a comfortable place for a recreation area using the cold forging technique. It is better to start with models that have angular shapes, they are easier to make.

Detailed instructions

We determine the dimensions (length - 1.5 m, height - 0.8 or 0.9 m, width - 0.4 or 0.5 m).

We make blanks for the frame from a cut pipe. It will be necessary to prepare 2 segments with dimensions of 0.4 m and 2 more fragments of 1.5 m each. We connect these parts into a rectangle and weld them. To make the structure more durable, we weld 2 stiffeners.

To make blanks for the legs, we cut the metal pipe into 4 parts, the length of each should be 0.4 m. The blanks are attached to the corners of the bench. To reinforce the legs, stiffening ribs are additionally installed.

Note!

For the manufacture of the back you will need 2 blanks. The length of one should be 1.5 m, and the other 0.44 mm. We weld the blanks for the back together and weld to the seat. We must not forget about the angle of inclination. For the rest to be comfortable, it must be at least 15 or 20 degrees.

The backrest can also be reinforced with stiffeners.

At the last stage, the seams are cleaned. The surface of the frame is coated with a primer.

If you plan to make a product with figured elements, then the implementation of such a task will require more time.

DIY shop photo

To garden plot was comfortable enough, it should be properly equipped. An important component are garden benches. You can make them yourself different ways and from various materials.

Bench made of concrete slabs and boards with a back

Looking at the drawings of the bench, you can find out the features of its device. You can make such a design with your own hands relatively easily, quickly and without high financial costs.

Making a bench with a backrest with your own hands in a step-by-step instruction is described in great detail.

Assembly: the initial stage

After preparatory work the wood processing time is right. In order for a do-it-yourself bench with a back to serve for a long time and decorate the site, it is necessary to pre-process the materials.

wood cover antiseptic formulations and let dry. After that, you can start collecting backs.

On one of the two-meter boards, fifty centimeters are measured from the edges. At this level, the edges of the white will be located.tons of slabs. From this mark another fifteen centimeters are measured to the center of the board. Here the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the boards of the back. Next, we measure fifteen centimeters for two more boards. Between them there should be a gap of five centimeters. All this can be seen in the drawing.

Wood glue is applied to sections of fifteen centimeters. Boards are applied to them, the length of which is sixty-five centimeters. Additionally, they are fixed with self-tapping screws.

From above, between the boards of the back, pieces of seventeen and a half centimeters are glued. In order for the parts to stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.

All wooden details can be covered varnish. This will give them additional stability and attractiveness.

Assembly of the main part

It is better to collect the main part of the bench from two sides. Placed between the boards concrete plates, and in drilled holes insert threaded rods M16 fifty-five centimeters long. They will need four pieces.

The rods are fastened with nuts and washers M16. Spin them at the same time different sides to make the bench level.

A simple bench with your own hands

You can make benches for giving with your own hands quickly enough if you follow the instructions. Consider four options for such garden structures.

On the drawings benches detail all its features. Making such a bench with your own hands is quite simple. The only difficult element is the concave seat.

The number of parts and their dimensions are indicated in the table.

The manufacture of benches with their own hands from wood begins with blanks the necessary details. Boards and timber are sawn into pieces of the desired length.

The manufacture of seat supports will be somewhat more difficult. You will need to markup on the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. Sections are treated with sandpaper.

Seat supports are attached to the two upper tsargs. One on each end and one in the middle. Next, the supports are screwed, spaced from the extreme ones by the width of the legs. All connections are made with self-tapping screws.

Boards are attached to the resulting base seats. It is desirable to deepen the hats of self-tapping screws.

Then attach legs. They are attached to the seat supports. The lower tsargs help to fix the legs.

The finished product is covered antiseptic and varnish.

Simple bench #2

To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.

In order for the base to be stable, the flower girls must be glued or connected from the inside with staples fixed with self-tapping screws. A layer of drainage and soil is poured into the tank. This increases their stability.

The seat for the bench is made of boards. To do this, they are cut into segments of the desired length. These blanks are laid so that they have a distance of half a centimeter. Then they are connected using cross bars. Planks are placed in three places: along the edges and in the middle. Corners are attached to the planks. With their help, the seat will be fixed on the flower girls.

Do-it-yourself bench with a back

Prepare the details of the bench shown in the figure. They are processed antiseptics before connection.

Then the supports are assembled from the parts. Pre-round the corners and chamfer. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.

The slope of the backrest is determined by part D, after which it is connected to part A. Similarly, but in mirror image another support is made.

After that, the back and seat are assembled. To do this, the supports are placed so that there is a distance of twenty centimeters between them. First, the front and rear bars are screwed to the supports, then all the others, and finally the stops are screwed.

At the last stage, the back of this bench is screwed.

Bench #4Another option for a simple do-it-yourself bench. Its length is one hundred and twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the back is also fifty centimeters.

The base is made from boards, whose thickness is five centimeters, and the width is from ten to twelve. One of the legs continues and is the backrest support. The supports are connected according to the “half-tree” method and fastened with bolts.

The basis for the seat is a bar fixed on self-tapping screws. The short legs on the back of the bench are colleted together to increase stability. The seat and back are sheathed with boards with a smaller thickness. The surface is painted or varnished.

A simple bench with a back for a summer cottage

The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with our own hands, then this option will be the most optimal in terms of the simplicity of the process and the result obtained.

Materials are best purchased already cut to size. If there is no such option, then you need to cut them yourself.

The resulting blanks polished. The ends of the boards are treated with an electric planer.

The rear legs of this simple do-it-yourself bench are also a support for the back. To create the desired level of inclination, the blanks are marked.

At a height of forty centimeters mark the place of attachment seats. Above the board is cut at an angle of twenty degrees. The cuts on the two blanks should be the same.

Gather first legs benches: the front ones are connected to the back ones with a beam. It is better to do this from above and below.

When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving distances of one or two centimeters.

To strengthen the structure and increase its stability, make the lower strapping bar on the legs. Two boards are attached to the back.

Finish the work with a finish coated which will protect the product from moisture and adverse conditions.

Do-it-yourself pallet bench

Make a bench with your own hands pallets It's easy if you use your imagination. This will require three or four of these wooden structures. Some will need to be cut to get additional details. The simplest do-it-yourself pallet bench design is when two pallets are attached perpendicular to each other, creating a back and seat.

So that the design does not turn out to be too cumbersome, it is better to cut the pallets along the right size. Fasten the elements with self-tapping screws. Add side details that enhance strength and make legs. All this can be seen in the photo.

Since the material of the pallets is raw, rough, it will need to be preliminarily grind. This will allow you to do without splinters.

The manufacture of benches with their own hands from pallets is being completed with varnish or paint.

Bench puzzle

You can make such a bench with your own hands if you have a wide board and shovels for shovels. Figured seats are cut out of the board in the form of puzzle pieces. Legs from cuttings for shovels are attached to them. Separate stools are obtained, which are quickly assembled into one long bench. All manufacturing steps are detailed in step-by-step photos.

Benches from unnecessary chairs: two do-it-yourself options

First option

To create such a bench for a summer house with your own hands, you will need four old chair.

From the first two chairs filmed parts on the front of the seat.

The rest sawed off the front legs are slightly lower than the seat structure.

From the resulting details you need take off old varnish or paint. To do this, the parts are applied special remedy, dissolving paint coatings. Then the softened layer can be removed with a spatula.

The racks should drill dowel holes. Holes are required on the front and end sides.

The dowels are smeared with glue and inserted into the drilled holes.

When the dowels are glued, you can collect base benches. To make the design durable, the parts are fastened with self-tapping screws. Construction surface sanded.

For seats benches choose a board that is suitable in size, saw off the excess.

If several narrower boards are used, then they are glued together with wood glue. For a tight connection, they are clamped with clamps and waiting for the glue to dry.

The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.

When the glue dries, cover the seat with masking tape and stain other structural elements with wood paint.

The adhesive tape is removed and the seat is processed wood stain. In conclusion, the entire bench is varnished.

Second option

To make a second garden bench with your own hands from old furniture You will need two chairs. It is better if the back and hind legs are not separated.

Two identical chairs clean up all parts of the structure except for the rear legs with a back.

take bars 5 cm wide and 3 cm thick. Two pieces are cut off, equal in length to the width of the chairs, and two pieces of the same length as the finished bench will be. From these four parts, a rectangle is assembled. It is fixed to the backs of the chairs with self-tapping screws.

Another frame is assembled in the same way. Several cross bars are attached to it. This design is attached under the seat, makes the bench more reliable and plays the role of a shelf.

If the chairs are old coating, then it is removed sandpaper. After that, the surface is puttied with a special compound or coated with a primer. When the layer dries, it must be sanded with fine-grained sandpaper. At the end, the structure is covered with paint.

Do-it-yourself seat for a garden bench is made from Chipboard or plywood. A rectangle is cut out of the selected material, which is larger than the base by half a centimeter on each side. Then cut out a piece foam rubber with the same dimensions. From upholstery fabric cut out a rectangle. It should be larger than the seat by five centimeters on each side.

Foam rubber is laid on a sheet of plywood, it is covered with a cloth on top. The fabric is fastened from the inside with furniture stapler.

The seat is attached to the base with a piano loop.

Bench-swing

To make such a bench for giving with your own hands, you should prepare necessary materials. Start manufacturing by creating basics designs. The seat bars are attached to the back bars at a selected angle.

Along the seat install additional ribs providing rigidity.

Attached to the seat planks, drilling holes in the base bars for fastening. The same goes for the back.

Armrests are installed on both sides of the seat. They can be bolted on.

The resulting bench cover wood preservatives and varnishes. It is very important to paint over everything as carefully as possible.

The bottom of the bench is reinforced with metal profile. Chains are attached to the profile, on which the swing bench will be suspended. Be sure to check the reliability of the beams on which the bench will be suspended.

log bench

To make such a bench with your own hands from wood, you will need chainsaw. The main material is taken thick log one meter long.

Log mark out, to get two slightly unequal parts. The back will be made from the smaller one, and the seat from the larger one.

Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.

The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is fixed on top. The bench is almost ready. It remains only to give it a more decorative look.

Can the seat be placed on legs. To do this, recesses are made in the lower part for installing a pair of logs as legs.

Bench-transformer

Design features of the transformer can be seen in the drawings of the bench. A do-it-yourself transformer bench is made from planed boards, which is cut to the named sizes.

In sliced lumber details holes for fasteners are drilled.

At the tabletop, boards located on the edge can be made wavy.

In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.

The edges of parts and edges are processed and rounded.

The assembly of all elements is carried out with screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.

Wooden parts stain stain.

The structural parts that will move are connected by hinges.

Between the boards of the tabletop place parts of a round cutting.

Set the stop for backs.

A do-it-yourself transformer bench is covered varnish.

rocking bench

Making an original bench with a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which contain a small amount of detail.

The side parts according to the pattern are transferred to euro plywood three centimeters thick. They are cut with a jigsaw and the ends are processed with a grinder.

To fix the connecting strips, markings are made. Then holes are drilled. After assembling the frame, the rails are fixed with self-tapping screws. The attachment points are spatulated, and the product is completely varnished.

Bench around a tree

The simplest version of such a bench - hexagonal. The size depends on the size of the tree. Measurements are made at the height of the seat. To the result obtained, another margin of fifteen to twenty centimeters is added. If you divide the result by 1.75, you get the length of the inside.

For cutting boards ten centimeters wide are laid in four rows at intervals of one centimeter.

The cut point is marked immediately for all rows with an angle of thirty degrees. So cut out six sets of blanks.

Legs are used with a height of sixty to seventy centimeters. They are connected by crossbars by drilling holes and using bolts with nuts.

The seat is installed so that the joints are located in the center of the ribs of the legs. Screw the outer pieces first, then the inner ones. In this way, the entire hexagonal structure is assembled around the tree.

At the end, they make a back and mount an apron. The result is a circular bench with a do-it-yourself backrest.

The finished product is processed oil impregnation.

Bench made of curved branches

A bench made of curved branches will look original. For you will need branches for the front, two legs, a horizontal top and a pair of transverse branches.

Sawing branches so that they match each other as accurately as possible. Then they are connected with metal corners.

Similarly made back and connect it to the front.

The finished product is placed on a flat area and the seat is assembled.

Bench options

• log bench, which goes well with surrounding nature. It consists of half a log used for the seat, and two short round logs that are legs.
  
• Beautiful wooden bench with a back and armrests, reminiscent of a sofa. Curved and carved elements make it more attractive, while left knots and bumps give the design a natural look.
  
• Bench made of wood and metal. The base of the structure is metal. The wooden parts of the seat and back are fixed to it. Due to the small thickness of the metal parts, it looks light.
  
• A bench of a simple, classical form. It's made of wood, pretty wide boards. This width allows you to comfortably sit on the bench. Armrests make the design more complete.
  
• original bench made of wood with curly details. This option is well suited for a site with a natural rural design. Carved legs and armrests, figured back - all this gives the product originality.
  
• Bench with an interesting back. The curved parts gradually deviate back, creating a unique design. The seat is slightly curved but has a more traditional look.
  
• Wood complex- a table with two benches. The design looks traditional due to the material used. original solution is the fastening of all components into a single structure.
  
• The bench is made from solid wood. A single piece is cut out of it, combining the back and seat. The legs are attached to the bottom. The log is required quite large.
  
• Bench with storage box for toys. Outwardly, it looks like an ordinary wooden bench-sofa, but under the seat it has a box in which you can put various things.
  
• Comfortable wooden bench with a simple shape. The base is made in the form of a rectangular box. The back is also simple with a straight shape. The seat is padded with soft cushions for added comfort.
  
• A wooden bench placed around a tree. It is made as if it consists of four benches, each of which has one armrest. The composition looks attractive and comfortable.
  
• Bench of a simple form from wide boards. It looks solid, but its dimensions are somewhat hidden by the gaps between the boards and the light blue color in which it is painted.
  

Garden benches are the most popular small architectural forms. You can make them of any size and design, but in addition to their direct purpose, the benches also perform a decorative function. You can make a garden bench for yourself with your own hands, using our drawings and photographs.

How to make a bench from "junk" materials

The easiest way is to make a bench out of wood. It is a traditional material for garden furniture, affordable and easy to work with. But even in this case, you can save money by choosing as the main material the one that literally lies under your feet.

The first option is trees, poles and stumps from your own site or a nearby forest plantation, in which sanitary felling is carried out.

Carefully cutting off a couple of medium-sized stumps, they can be put on the base of the bench. From the poles, make the lower crossbar for structural rigidity. And for sitting, dissolve part of the trunk on the circular. If there is no equipment for longitudinal sawing, then you can take an unedged board with a thickness of 75 mm.

In this example, the bench is already more comfortable - in addition to the seat, it also has a backrest. The model is a little more complicated, since you have to find more high part trunk and process it in two steps - first make a profile cut with a “ledge”, and then dissolve the workpiece into two halves.

And to assemble the next bench, you will need:

• two short logs of the same diameter for the base;
• two medium-thick poles for supporting the back;
• one long log, sawn into two halves (for the seat and back).

In short logs, you need to choose a groove so that a long log fits into it. Then the seat is fixed in the grooves, and each pole is fixed at two points - to the base and the seat. For fastening, it is better to choose powerful self-tapping wood bolts.

Another budget material for a country bench - pallets (wooden pallets). But not every pallet is suitable for the manufacture of garden furniture. Ideally, you need from a good edged board, the so-called euro pallet, which can be recognized by the EUR marking.

In principle, the standard width of the euro pallet is somewhat large for the seat - 80 cm. It can be shortened to 67 cm by cutting along the contour of the central bar. But you can not do this. Here are some examples simple designs with different options bases and seats:

1. Bench of four pallets uncut in width. Three serve as a base, and the fourth as a back. At the pallet for the back, you will have to remove part of the support bars, and ensure the rigidity of the bench with wooden slats.

2. In this case, four pallets are also used, but already cut. Three ropes woven obliquely are used to fix the back, and wallpaper nails are used for decoration.

3. This bench is made from just two pallets. One is intact, and the second is cut and, as it were, bent at an angle - it serves as both a seat and a back. The design is good for its mobility - there are small wheels as legs.

Perhaps the only inconvenience of using euro pallets as a starting material is standard sizes 80x120 cm. They limit the possibilities for creativity to some extent. The use of ordinary lumber (boards, bars and beams) allows you to make a bench for giving for every taste.

Board and bar

It should be said right away that any bench drawing can be adjusted for specific conditions. The only limitation is that the thickness of the board and the section of the bar are sufficient to fulfill the load-bearing properties.

Below is a drawing of a bench, which is made of only three “paired” elements:

• seat and back;
• short support (back leg) from a board in the form of a trapezoid;
• long support (front leg).

1- front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view

The result is a stable structure with a triangle at the base and two transverse stiffeners.

This is what the bench looks like in real life.

In this drawing, the bench is in a more complex design. For its manufacture, you need a 40x140 mm board (supports, back and seat), a 40x70 mm bar (short bundles of supports) and a 20 mm board (a long bundle between the sidewalls).

And this is the same design, but using a board and a bar 75 mm thick. Small differences in the base and attachment of the ligaments are not fundamental.

There is only one condition in principle - the boards in the seat are attached with a small gap, sufficient to compensate for the expansion of the tree in high humidity.

large forms

Wooden benches in a "large format" look original.

For example, here is such a “thick” unedged board across the entire width of the log. Covered with clear varnish, it conveys the natural beauty of wood with all color transitions.

From rounded logs, you can build not only a summer house or a bathhouse, but also such a garden bench.

And from a bar you can assemble an original chair that can serve not only under a canopy, but also in the open air - removable pillows can be easily brought into the house in bad weather.

stone and wood

Stone, like wood, also organically fits into the landscape. suburban area. Of course, a flat slab is practically never found in nature, but sawn stone can be used.

The next option is easier to perform - the bench is made of small blocks of wild stone. And since such a surface is not only cold, but also uneven, you can’t do without pillows.

Pillows add comfort, but they have to be constantly brought in and out. That is why for seats in garden benches, regardless of the base material, wood is used. This is how it is with such an original bench, at the base of which a gabion is used (a mesh cage filled with stone, rubble or pebbles).

Concrete is no less popular for making the base of the bench. But it is difficult to make a form for pouring a complex contour at once, but a small formwork is simple. And even a “cold joint” when pouring in two steps will not affect the strength of the structure (such as in this photo).

Another option artificial stone- hollow building concrete blocks. It is enough to fasten them together with good masonry glue, and lay a bar in the cavity, and the bench is ready.

metal and wood

The simplest design benches on metal frame use a square profile.

Can be welded from profile pipe two sidewalls in the form of the letter "H", and a wooden seat made of solid wood will also serve as a "stiffening rib".

In the following example, solid wood is also used as a stiffening element, but the supports are made in the form of a square with a cross member for attaching the seat.

And this is the simplest self-supporting construction of a square profile, in which the strength and rigidity of the welded base is sufficient to make the seat from a wooden bar.

The following photo shows a factory-made bench.

But if there is a pipe bender in the home workshop (and it’s easy to do it yourself), then bend two types of arches and a “wave” from round pipe simply. Then the metal blanks must be welded, put plastic plugs on the legs (sold for any profile and size of the pipe) and fix the bars on the “wave”.