Unusual garden benches do it yourself. Garden bench with your own hands: Drawings, photos and secrets of technology

Arriving to the country area, many expect to relax, relax and have a pleasant time. In order for these plans to embody into reality, you need to take care of creating relevant conditions. It is not enough to simply install several shops.

You can make an attractive and original corner, in which you can relax, enjoy the surrounding nature and the results of our own work.

Location

The first problem that needs to be solved is in choosing a place for a shop. It affects the material of the structure. For example, for the old garden with large branchy trees, wood products are suitable for a small area, not very planted with trees and shrubs, small openwork designs are recommended.

If you search for network examples of the photo shops in the country, you can see that they are often a component of the arbor, veranda and summer sites. If you plan to make something similar, then take care of all the details are made in a common style.

Place for a bench, choose a pleasant look from it. It is unlikely that you will want to admire the fence of the neighbors or the shed walls.

It is advisable to choose places in front of lakes or rivers, flower beds, etc. The main thing is that the surrounding objects attracted and pleased the look, helped relax and tuned on a positive way.

It is desirable that the shop is located in the shade. It is put under the crowns of large trees or under sheds. Remember that it acts as a place to relax and relaxation.

You can put shops near the beds. There are a few advantages here. First, the owners of the site will be able to follow the growth of the harvest. Secondly, the shop will suit for a few minutes to rest against physical labor (digging, watering, harvesting).

Do not forget about decorative ornaments. Did you make a simple shop with your own hands? Place the blooming shrubs around it. Also for the decor fit flower beds. They are put on the elevation or create a special area of \u200b\u200bbricks, tiles or logs.

Materials

There is a large selection of materials that are used for the manufacture of benches. The most common option is wood. And there is nothing surprising. It is considered simplicity in processing, is distinguished by affordable cost and low weight.

You do not need to use the same perfectly smooth bars. If you take natural material in natural form, then the final result will certainly like the owners and guests. Instead of an ordinary shop, a real decoration of the garden plot will turn out.

Popular and stone structures. They are durable and aesthetic. But there are disadvantages. Sitting on them is recommended only during the warm seasons.

Forged products - the best choice for luxury and grace fans. However, this option is not suitable for those who are looking for how to make a shop with their own hands. High-quality and beautiful metal structures will manufacture only an experienced blacksmith.

Models look good in which various materials are combined. For example, a wooden shop can be decorated with textiles (pillows, bedspread). It will make it a homely cozy and comfortable.

Preparation for work

Deciding with the material and location, you can start creating a bench drawing. At this stage, the shape and dimensions of the product are determined. There are no strict rules here, but if difficulties arose, you can follow the following scheme:

• seat height - from 40 to 50 centimeters;
• width - from 50 to 55 centimeters;
• the height of the back - from 35 to 50 centimeters.

If you want to make a bench with a back, you decide in advance how you will fasten it to the seat. It is also of great importance, you plan to transfer it or not. In non-portable models, the legs are securely fixed in the ground.

The drawing will allow you to understand how much material will be required. Additionally, you need to fastening (nails, screws, screws), primer and protective paint.

Scheme of work

Consider the simplest scheme how to make a bench with a back. For work, you will need: two bar, wooden trimming (two to three pieces in size 150 x 200 millimeters); Gorny.

We work according to the following scheme:

• We make two pits in the ground (it is important that they do not differ in depth);
• Less angles between bars and racks. You need to make sure that everything is located smoothly. Otherwise, the bench will not be comfortable to relax;
• Krepim Bruks (using selflessness or nails);
• Swallow the workpiece and qualitatively tamper them;
• Fix the back;
• Covered wooden pieces of primer and protective paint.

This is the simplest shop, to make any master.

Photo shops do it yourself

The bench is simply necessary in the country or the household plot. The main purpose of its purpose is a place to relax. He who knows how to work, should be able to rest. Someone simply sets the bench, and someone creates an interesting corner, which certainly has a full-fledged rest. You can just relax, but you can just enjoy the environment and from the results of your work. There are many ideas worthy of attention. Of particular interest are the usual designs that can repeat any person familiar with the tree and owning a primitive set of tools.

Everyone can imagine what kind of the most common bench is, but not everyone is simplicity for the soul and most of the choice on the original solutions. Everyone wants to have something that is not, for example, a neighbor in the country. Almost all daches start with the decoration of the country or the nice site, and here there are also many options. Alternatively, you can take a design site from the installation of the bench, after deciding with the place of rest. After all, the place of rest is not needed later, it is necessary now. Therefore, the design of this place should be done in the first stages of the process of decorating the country or the nucleotop area and only then begin the design of the rest of the territory.

As a rule, summer houses are very crowded with growing various green plantings and colors. Especially, there are many of them near the buildings. Alternatively, you can combine plantations with a seating area by installing the bench not far from the cottage. In this case, everything will be organically looked: both green plantings, and flower beds, and an original bench.

Two flower beds from the boards and between them bench

Variants are a huge set: from the simplest, to the very wisdom. The easiest option may consist of two wooden boxes in which flowers are planted, and two boards built between these boxes. Boards must be sharp and well sandy. This design can be positioned directly near the cottage wall. On the wall you can fix a couple of the same sharply boards, which will serve as a kind of back. Instead of wooden boxes, concrete courses can be installed, which will be able to stop much longer wooden elements.

A similar design is very simple, and most importantly quickly. As for the boards, they can be purchased ready or made under the size itself, using non-processed boards. But in this case, you will have to work hard, but the bench will not cost anything, and the result will definitely please. If concrete colors are used, the boards can be fixed using metal corners. The only problem is the complexity of drilling holes in concrete. In no case cannot be used the perforator, since the vase, even concrete, it will easily split, especially if it is made independently.

You can not mount the boards, but instead of the boards put a huge log, which is not necessarily fixed, if you correctly install it.

As mentioned above the variants of the set, and they are created on the basis of real possibilities that the owner of the cottage. Alternatively, you can simply install a stay shop away from colors and green spaces. After all, it is no secret that various insects are hidden in colors and between the leaves of plants, which do not have rest, but on the contrary, make it take to leave behind the worst memories of rest.

As a bench, you can apply hollow blocks, in the voids of which processed boards are simply inserted, which can serve as seats.

To make it convenient to sit, sharp block corners should be rounded. Well, if these blocks are heavy and large. If the blocks are small, they can be coppped with studs in one.

Bench bench

The site can be issued in any style, but almost everyone leaves the standard approaches to solve the problem. Everyone wants to have something to have something. But not everyone knows that a new one, it is an advanced old one. Alternatively, a new, but somewhat enhanced old, is an option to use a log, as a bench. As a seat, you can use a log of large diameter, painted along. As a back, a log of smaller diameter is used, as painted along. Or a smaller barrel diameter, but cut closer to the edge. As a leg used narrow logs of the log.

Bench from the log - quickly and just

The legs and seats are connected to each other with metal pins. Under the pins are drilled by a slightly smaller diameter. Pins should enter holes with effort. At the same time, half of the pin is clogged with blows on the pin, and the second half is driven by a tree blows. As a rule, they are hit without the tree itself, since traces of the hammer can remain, and with the help of a wooden backup. Such a connection must be reliable, although the mounting options are set.

In the photo, slightly higher, you can familiarize yourself with another option, in Ethno style. His organization is associated with the presence of a stone, although this option is quite realizing in the presence of a log. As a seating, a rather thick log is used, and as a leg is a part of a large diameter deck. In one and another part of the deck, the grooves under the seat are cut down. As a tool, an ax or Bulgarian is used. Alternatively, you can resort to the help of chainsaws. This is not post-Soviet "friendship" or "Urals", which have a considerable weight, and they, except that, convenient to equip pines in Siberia. If you take adjust to the chainsaw "CHTIL", then with its help you can do not such works of art.

From the logs really make a table that is simply necessary in the country. In the photo you can see the results of such actions. The countertop made of boards, and the rest of the ensemble from the logs from different diameters.

Bremen Benches Table

The next bench, built in this style, has a completely original execution. Here, legs and armrests are made of branches of various thickness, and the seat from the treated, high-quality unedged board.

Another bench is made in the same style. The only difference is that the boards and branches have the opposite direction. As a result, it turns out a completely different look. As for execution, no special skill here is required. The careless end result, the more valuable. In any case, so perceive the surrounding similar approach. Most likely, people are tired of imaginary perfection and they are more likely to shrub and primitivism.

Wicker back - meet infrequent

Alternatively, around the tree you can organize a platform for relaxation and install a bench.

Place for relaxation under the tree

It is not at all difficult if you have a swing and a gazebo nearby. Above the bench is better to build pergola, similar to the arch. For a full-fledged rest, there is not enough pond, fountain or waterfall.

Metal and Tree benches

As a rule, no one decided to build a bench made of metal. In the summer, they can heat up to such temperatures that it makes no sense to speak at all. In case of cooling, the picture is the same. The bench becomes so cold that it is impossible to sit on it. But benches where the combination of metal and wood is used is the most in demand. As a rule, the frame is made of metal, which ensures high reliability of the design, and the seat and back is made of wood, which provides certain comfort.

Pipe bench

If the design improves and make soft armrests, soft seats and backs, as in the photo, then a similar design can compete with the most modern versions of benches for recreation. To make seats, armrests and backs are soft, just cover with a suitable material furniture foam. In a similar style, it is possible to build a tabletop.

On a note!When using wood, it is desirable to leave between the individual elements of the gaps up to 5 mm. This is due to the fact that when the environmental humidity changes, the dimensions of the elements are changed.

Stylish Metal and Tree Vegetables

In the process of creating a platform for recreation, you should take care that there are no sharp corners, especially in metal structures. This is very important if there are children. All elements of the ensemble, such as benches, tables, garden chairs make a round and square pipe, bending them so that smooth transitions come.

Table and Bench Pipe and Board

The presence of metal allows you to bend the design of any form, although it will not be so easy to do and need a special device. The presence of such features allows you to curb the design in one occasion, without applying other tools for this, such as Bulgarian and a welding machine. The main thing is to consider the design to the smallest detail. If a tree is used, then only well-processed. It is impossible to allow the wooden elements to be present sovereigns or chips.

Benches from the board

The most popular option is benches from boards. Many fulfillment options. There are even structures similar to sofas. If you put soft pillows on them, then you can lie down.

This garden bench is more reminiscent of the sofa: with sufficient sizes and you can lie down.

The design of garden furniture, based on a modern approach, are assembled elementary. As a rule, they consist of rectangles with partitions made of a thinner tree interconnected into one.

If you strain and make your fantasy work, you can build a work of art from a conventional shop, if, for example, instead of legs and armrests, install wooden wheels.

Shop from boards with back and wheels instead of the sideways - it looks interesting

One of the most simple designs of the country shop consists of one board, to which the legs are fellow in the form of the letter "X". Similar shops built our ancestors, although they can be found today.

Traditional layout design

Using a tree, you can build a bench in the form of the letter "P". In this design, it is very important to ensure reliable fastening of the seating and legs. Such an option involves the use of a thick board or timber for reliability. Alternatively, you can install the "on the edge" board, for greater rigidity, and for greater reliability it is recommended to secure with metal corners.

This photo contains an option where it washed under 45 degrees. With the help of a special tool, this is not difficult. If all parts are connected, then the angle is 90 degrees. If the board is fat and the seat will not be fed, the bench will last for quite a long time.

In the photo below, you can see another option of an interesting solution, which is characterized by increased reliability. As legs used boards of different lengths. The difference in length is the thickness of the board: each second board must be shorter. Connect the design with nails. Moreover, through one board, nails are clogged either into the seat board, or to the board for the legs.

Modern Style Bench

Original solutions

Along with the classic approach to the process of manufacturing benches, there is also an original, although appropriate materials and tools are needed to solve such a task.

For example, from a large stone you can also build a bench if it is consolidated to secure the appropriate platform from the tree.

Bench of stone and boards

If there is a bamboo from it, the seat is also made, which will take more exotic appearance.

From bamboo, and a whole

Or stone.

Sitting winter will be unpleasant, but beautiful ...

It all depends on the flight of fantasy. This owner has no unnecessary things or materials in the country. With a reasonable approach, you can attach any thing, and it will not be just like that in the country or lie in a dead cargo in the garage or in Saraj.

How to make a bench: photo reports

Naturally, each host has a set of tools for making stone benches, but everyone has a minimum set of tools for working with wood, especially since it is very simple and accessible tools. Therefore, it makes sense to consider structures from a tree. Everything that is done with your own hands is ultimately the subject of pride.

Shop without back

Design, although simple, but has a rather spectacular view due to the material used. As a leg serves a ram with rounded edges. In extreme cases, a similar timber can be prepared independently of round logs of a small diameter, sneaking them from 4 sides. The result will be the same bar. Therefore, problems with the construction of the bench should not be. From this material will be made legs benches. To do this, you should lay the sliced \u200b\u200bbars plafhone (horizontally) one on another. It is this design solution that makes a certain exclusivity in the design.

A simple shop looks interesting due to the material

A bench without a back is 120 cm long, 45 cm wide and 38 cm in height. Round the face of the bar is permissible in any way. To not really strain, you can already find a ready-made, profiled timber. Although it will cost much more expensive, but it's a pleasure to work with him.

Depending on the size of the bench, it is not difficult to calculate how much a bar is required. If the timber is taken, a cross section of 70x70 mm, then with a height of the legs of 380 mm, it is enough to put one to another 5 bars. We believe: 45 cm multiply by 5 pcs. And it will turn out 2.25 m timber. Since the legs 2, the timber will go 2 times more, which means 4.5 meters of timber. A board, a thickness of 40 mm and a width of 90 mm take place as seating. Given the width of the shops will need 5 boards, 1.5 meters long. If you calculate more accurately, you will need 1.2 m x 5 pcs. \u003d 6 m boards.

At the first stage, the boards are cut according to the size. At the same time, it is necessary to round all sharp edges. To do this, you can take a rupture or simply large sandpaper and carefully process the boards. To do not particularly engage yourself, there is another option: you can simply agree on the sawmill and get a well-processed board, especially since they have all the possibilities for this. It remains only to take and cover them with varnish.

Processed boards

After that, it is embarrassed for the manufacture of legs, for which the brushes are cut to the same segments, 45 cm long, after which they are folded one on another 5 pieces. The next step is the connection of the stability legs. In this case, it can be copped with metal pins or with wooden brazers. The distance between the fasteners is 7-10 cm. As a rule, such a compound is made using glue, then the connection is obtained more reliable.

Lines on which pins will be installed

The pin compound requires accuracy of drilling holes, otherwise the bars will not be on the same line. To do this, it is better to use the template. In addition, the dimensions of the elements of the legs should be the same, then it will be possible to accurately place the location of the holes. For those who are familiar with drawing, roulette and pencil, will not be much difficult to do everything right.

Pins should be installed in a checker order, therefore it is necessary to note in mind this particular. The same boards are attached to the legs at the calculation of two holes per board.

If you look from a technological point of view, this is not a bad connection option, but it requires a certain skill and work experience with the tree. The compound stage can be simplified if the bars for the legs fold one on the other and rigidly connect them using clamps. Then the accuracy of drilling will be provided. Alternatively, the bars can be combined with long metal spills and nuts with washers. In this case, it is enough to drill through 2-3 holes.

Seats can be nailed to legs with nails, which makes it much easier to make all the technology of manufacturing such a bench.

The bench is made with your own hands. Stroperation remained

When using nails, the hats are preferably told, because they will then rust, which is completely undesirable. For this, nails are clogged so that the hats do gripped the tree in almost 5 mm, for this you can use a copper. After that, a putty is taken, a little sawdust is added to it to suit the color, and the recesses are spun. After complete drying, the places are thoroughly sandwiched with sandpaper. So that the place where nails are not stand out on a general background, they are covered with a suitable varnish.

The technology of autopsy lacquer of wooden surfaces is quite simple, especially since it is described in detail in the instructions for use.

Benching bench from broken chairs

If there are two old stools and did not have enough fantasy to adapt them somewhere, then you can make a bench. They will only go the same and strong enough. If they are loosened, they will have to repair them. Chairs are sacrificed so that the backs and legs remain. After that, two stools, or rather what remained from them, are installed near and connect their backs with the help of the rivers of the corresponding thickness.

Bench of old chairs

In order for the design to be rigid, at an altitude of 20 cm from the floor, the design is associated with the same rails around the perimeter. Subsequently, these rails will serve a footrest, and if the bottom is to sew, for example, plywood, then you can store any things.

Prayes made design

After the design is enhanced and ground, you can paint it. In this case, the usual paint is suitable, which can hide some flaws of the whole design and especially old chairs. It remains only to cut the sheet of plywood, put a foam rubber on it and cover some cloth. At the same time, it should be considered the fact that the bench will mainly stand outside to the coldests. Therefore, it is better to stop your choice, for example, on the leatherette. In any case, the material must be moisture resistant.

Finishing bench

Pallet Garden Bench

A reasonable owner, any material has its value. Garden furniture can be easily made from cargo pallets. Moreover, they are not particularly required to disassemble: from one pallets the back is made, and from the other - the seat. It remains only to think about what makes armrests and legs.

That's what should happen

One of the pallets is enhanced by additional bars, which are attached with the help of self-tapping screws.

Enhance the corners of the pallets

After that, the timber is taken, sizes of 100x100 mm and arbitrary length, after which 4 identical segments are cut, up to 80 cm long. They are attached in those places where the reinforcement bars are set in advance. As a result, there will be enough legs, 20-25 cm long long. Self-tapping screws are used for fastening, no less than 150 mm long. In the process of work, you need to make bars to be properly screwed to install the legs of the same length.

Screwing legs-supports for armrests

If, after these actions, it is not possible to get an absolutely flat design, then the legs can be written at the end if the shop will not be installed smoothly.

Foots screwed

The second Paletta is attached to the rear racks, and on both sides - a plank for armrests.

Almost done

If there are no such plans, you can simply thoroughly treat the wooden elements with sandpaper, after which the bench just paint any paint, of any color.

Ready Product: Pallet Chair

Workers drawings benches from wood

And the point is not even that it is very convenient and functionally, but in the fact that the garden bench has always been almost the main element of the decoration of the household site. In order for the bench perfectly into the overall appearance of the garden, and at the same time kept its functional affiliation, it will not be too much more detailed to consider this item "Garden Interior".

Materials of garden beam

Modern benches are made of both classic materials - wood, stone, wrought iron, marble, and from more modern plastic, synthetic fiber. Often benches can be made simultaneously from two or more materials - stone and iron, wood and glass, wrought steel and wood. From this depends on the style in which this subject is made. This means that it is necessary to select a bench for the garden, taking into account its stylistic features. For example, a bench from stone or wrought iron and wood will perfectly fit into the garden, made in a classic style, and the plastic bench will look great on the lawn in front of the cottage in a modern style.

But still, the most popular material used for the manufacture of a garden bench is a tree. In particular, Tick is most often used. Ticky tree has always been used in shipbuilding, as it is very moisture resistant. In the fresh air, a gray raid appears on the furniture from teak, which is easily removed with a soft brush. In addition, tick furniture must be treated with teak oil, which comes complete with furniture - so furniture will serve for many years.

Manufacturers of garden furniture are often not limited to production only benches, but make whole ensembles of furniture for the garden. In addition to the benches, it includes a table, chairs, swing, pillow storage chests - and all this, performed in one style, will become amazing decoration of any garden.

Where to put a garden bench

If only single benches are planned to put in the garden, then it is necessary to put one bench at the porch - it will be a wonderful sign of hospitality, and if you put another bench somewhere in the garden depth, under an empty tree, then this place will be an excellent corner for privacy and rest in silence.

Of course, the bench, first of all, plays a functional role. Therefore, it is worth a particular attention to its dimensions. For example, if the bench is installed in the part of the garden, where family gatherings for barbecue are held, then the bench should be long there, or several small benches, so that all family members and guests can comfortably accommodate. But if you remove the true functional purpose of the bench, then you should pay attention to the psychological aspects of its use.

According to psychologists, the joint seat on the bench can pick up the collapsing spouses, tie a friendship with a pleasant interlocutor. And the secret of this is that when people are sitting on a bench, their look covers one landscape, they breathe in one air, their thoughts and feelings are gradually starting to flow in one direction.

Garden benches - Photo

But as for the shape of the bench, now there are many of them and choose anything to be taste. Suppose the garden grows a huge spreader tree with a wide trunk. Around it can be installed a round bench so that the sitting were back to the tree trunk. But if you build a beautiful round flowerbed or a small fountain, then the round bench will fit perfectly in the same way, only sitting will already be face to the center of the composition. Round benches are very convenient to accommodate a lot of people, while not taking a lot of space.

Everyone who installed a bench in its garden, or even a few, with confidence it can say that he received another peculiar room, a cozy corner of his house, in which it is always nice to relax and spend time with loved ones. The only difference is that this corner is open-air.

Bench around the tree do it yourself

The bench with several seats can be a logical conclusion of flower beds or surround the tree in the garden. A couple of days of work - and a new place of rest is ready!

It will be necessary to work with decorative details, you can use our option or independently develop a form. The presented bench is suitable for trees with a barrel with a thickness of up to 45-50 cm!

The template for decorative slats is based on a grid of 5 x 5 cm. Intellite the cells on the tree, and then transfer the smooth line.

1. The shortest seat board is performed with a special notch so that the inclined backs are precisely adjacent to it. To do this, to the details, which from both ends is already spilling with a 17 °, attach two rails as a reference point for marking. The slave imposed on top should be the size of the back, the second rack serves only as a support.
2. Starting from the rear angle, note the thickness of the back (3.5 cm).
3. Since the angle of inclination of the back is 100 °, it is necessary to verify the recess with the angle of inclination of the part.
4. Using a joinery of a carbon, mark the angle of 100 °, as shown in the photo. Then hesitate cut the complex "wedge".
5. A blackboard with two slats will serve as a template for mounting seats.
6. So that all six seats were the same, check with the template.
7. For decorative slats, you will need a grid pattern, with which you can handle all six boards.
8. Holes Perform the forstner drill.
9. Round the edges of the top mill.
10. Mount the back.
11. Cover the details of the protective primer for wood and paint their enamel.

Bench for Garden - Photo Ideas

Garden benches are the most popular small architectural forms. You can make them any sizes and structures, but besides your direct purpose, the benches are performed and a decorative function. You can make your own hands for yourself a garden bench, using our drawings and photos.

How to make a bench from the "thrus" materials

The easiest way to make a bench is made of wood. This is a traditional material for garden furniture, available and easy to handle. But in this case, it can be saved by choosing as the main material the one that literally lies under the legs.

The first option is trees, rods and stumps from the same site or nearby forest stitch, in which the sanitary logging is carried out.

Gently cutting off a couple of medium in size, they can be used to base bench. From the jeres to make the lower crossbar for stiffness of the structure. And for the seating to dissolve on the circular part of the barrel. If there is no equipment for longitudinal sawing, then you can take an unedged board with a thickness of 75 mm.

In this example, the bench is already more comfortable - in addition, in addition to the seat there is a back. The model is a little more complicated, as it will have to find a higher part of the trunk and to process it in two receptions - at first to make a profile cut by the "ledge", and then the workpiece to dissolve into two halves.

And to collect the following bench, you will need:

• two short logs of one diameter for the base;
• two medium porsi thickness for backing support;
• one long log, collapsed by two halves (for seats and backs).

In short logs, you need to choose a groove so that a long log lay in it. Then the seat is fixed in the grooves, and each storm is fixed at two points - to the base and the seat. For fastening it is better to choose a powerful samongate tree bolts.

Another budget material for cottage bench is pallets (wooden pallets). But not any pallet is suitable for the manufacture of garden furniture. Ideally, you need from a good edged board, the so-called europallet, which can be found in the marking EUR.

In principle, the standard euro tray width is somewhat large for the seat - 80 cm. You can shorten it up to 67 cm, cutting along the contour of the central bar. But you can not do this. Here are some examples of simple designs with different options for bases and seats:

1. Bench of four pallets over the width. Three serve as a base, and the fourth back. The backrest pallet will have to take part of the support bars, and the rigidity of the bench is to provide with wooden plates.

2. In this case, four pallets are also used, but already cut. For fixing the backs, three ropes woven oblique, and for decorating - wallpaper nails.

3. This bench is made of only two pallets. One whole, and the second cut and, as it were, bent at an angle - it serves simultaneously and the seat, and the back. The design is good for its mobility - small wheels stand as legs.

Perhaps the only inconvenience of the use of the European Pallet as a starting material is the standard dimensions of 80x120 cm. They are to some extent limit opportunities for creativity. The use of conventional sawn timber (boards, bar and bar) allows you to make a bench for giving for every taste.

Board and Barlok.

Immediately it is worth saying that any drawing of the bench can be corrected for specific conditions. The only restriction so that the thickness of the board and the cross section of the bar was sufficient to carry out carrier properties.

Below is a drawing of a bench that is made of only three "paired" elements:

• seat and back;
• short support (rear leg) from the board in the form of a trapezium;
• long support (front foot).

1 - front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view

The result is a steady design with a triangle at the base and two transverse ribs of stiffness.

This is how this bench looks "live."

On this drawing bench in a more complex performance. For its manufacture, you need a 40x140 mm board (supports, back and seat), 40x70 mm bar (short bundles of supports) and 20 mm board (long bundle between sidewalls).

And this is the same design, but using a board and a bar with a thickness of 75 mm. Small differences in the base and fastening of ligaments are not fundamental.

It is fundamentally only one condition - the board in the seat is attached with a small gap sufficient to compensate for the extension of the tree at high humidity.

Large forms

Veneers look original in "Large format".

For example, this is the "fat" unedged board across the entire width of the log. Covered with transparent varnish, it transmits the natural beauty of the tree with all the color transitions.

From the rounded log, you can build not only a cottage or bath, but also such a garden bench.

And from the bar you can collect an original chair that can serve not only under a canopy, but also outdoors - removable pillows in bad weather are easy to put in the house.

Stone and tree

Stone, like a tree, also organically fits into the countryside landscape. Of course, a smooth plate in nature is practically not found, but you can use the saw stone.

The following option is easier to execute - the bench is composed of small blocks of wild stones. And since such a surface is not only cold, but also uneven, then no pillows can no longer do.

Pillows add comfort, but they have to constantly bring and endure. That is why for seats in garden benches, regardless of the material of the base, apply a tree. This is how such an original bench, at the base of which the Gabion is used (a cell from a grid filled with stone, rubble or pebbles).

No less popular for the manufacture of the base of the Bench concrete. But to do at once a composure form for the fill is difficult, but a small formwork is simple. And even the "cold seam" when filling in two taking structures (such as in this photo) will not affect.

Another version of artificial stone is hollow building concrete blocks. It is enough to spray them with a good masonry glue among themselves, and in the cavity lay a bar, and the bench is ready.

Metal and tree

The simplest pavement shops on the metal frame use a square profile.

You can cook from the profile pipe two sidewalls in the form of the letter "H", and the wooden seat from the massif will also serve as the "rigidity edge".

In the following example, an array of wood is also used as a stiffness element, but the supports are made in the form of a square with a cross-line for fastening the seat.

And this is the simplest self-supporting design of a square profile, in which the strength and rigidity of the weld base is sufficient to make the seat from a wooden bar.

The following photograph shows a factory bench.

But if there is in the domestic workshop of the pipe bender (and it is easy to do and with your own hands), then bend two types of arches and "wave" from a round tube. Then the metal blanks must be welded, put plastic plugs on the legs (sold under any profile and the size of the pipe) and fasten the bars on the "wave".

The benches and benches in the garden play a double role:

Practical. Functional element of garden furniture, which serves as a place for a comfortable stay. For the additional convenience, the shop is made with a back of their own hands. The armrests will not be superfluous, and if the seat is wooden or stone, put soft pillows.

Aesthetic. The benches are small architectural forms in the landscape design of the site and are designed to decorate and complement the selected style composition. The shops are preferably in harmonious to enter the garden interior, complementing the beauty, trees and reservoirs. To the greater, the appearance of the benches depends on the architecture of the house, but also as an independent design element, it can undoubtedly attract attention, giving the composition a finished look.

The material from which the benches makes a completely diverse - wood, metal, plastic, combinations of two or three components in one product. This manifold allows you to successfully emphasize the individuality of the owner, identify its taste preferences.

The shape of the bench can be extremely simple or vice versa, to strive with its intricate view, but there are certain requirements that need to be observed before making a shop and place it on its site:

• The ability to withstand loads. The selected materials and fittings should be durable and not deformed by weight of 2-3 people.
• To transfer temperature differences and aggressive weather phenomena, without losing the appearance and breakdowns of the case.
• Dimensions to have such to accommodate 2-3 people with comfort. The generally accepted sizes of the shop - 1.5 meters long back and seat, and the width is about 40 cm. The back is 80-90 cm. The distance from the ground to the saddle is 45 cm.

Wood bench: a huge number of options

The easiest way will make a shop with your own trees. A couple of unnecessary boards will be found at any owner. And if there are two large overall plants in wooden personnel, then an exclusive product will be released. Boxes or bans use instead of legs.

Emboss the seat will be very simple. You take these two boards and nail to the boxes. Get a joint comfortable bench and mini-kindergarten. For support, you can take slag blocks, make a laying of stone and bricks. Further act in the method described above.

Bench in the style of Rustic, will come out of a thick log, painted along in half. The legs cut out of the same logs, only the sawn across, and the wall of the log of smaller diameter or the rounded timber. Connect the details with metal pins.

A fabulously beautiful bench, in the same style, turn out if the details of the shop are assembled from curved branches of different sizes, and the seat from the raw board. Wooden items to clean from the bark, handle emery paper and covered with varnish.

Fresh, rustic view of Zavalinka, give the back, decorated in the form of a shoulder. Such a bench in compositions with clay jugs, a platform with wooden sleeves, growing sunflowers, will give the design of the site a very colorful look.

Large luck is a growing adult tree with a spreaded crown that gives a shadow. Around the trunk, in a circle, it is possible to place a benches or podium. It is nice to relax on the pillows, watch birds and listen to their singing.

Unusual options: Bench Transformer and Bench Swing

If your hands grow from where you need and you like to work with a tree, you can try to make an interesting object that of two benches is transformed into the table and two benches. The required amount of materials and detailed drawings of the transformer shops are easy to find on the Internet. Following these instructions, you quickly master the manufacture of this item.

For those who relate to people who like not to use the use of items, giving them a second life, suitable bench-swing from wooden flights. It can be suspended on the structured independently supports or on a tree branch, capable of withstanding the weight and a person sitting on it. Hang swing on chains or ropes.

Bench with metal elements

No less interesting, metal products are obtained. Forged elements give the bench smooth forms and a unique appearance. Metal shop should be performed from high quality material, and chromium armrests. In this case, the product will last long and will have such properties as:

1. Fire fighting.
2. Resistance to wear and damage.

Fully metal shops are rarely used. They are beautiful, but when relaxing on them, they recommend to put a litter, as the metal heat is heated and it will be uncomfortable to sit, and in the cold time, the opposite.

Most often, legs and frame beverages are made of steel, and the seat and the back of the tree. If you do not own the art of forging, but we decided to use steel elements in the independent manufacture of bench, that is, an interesting version in a modern style:

• From the profile to cook two rectangles.
• To their side walls, welcome the corners on which the seat will be relying.
• On the seat we use a thick wide board.

In one article it is difficult to tell about all the options. Look at the photo, maybe something you take a note, and then embody what has seen in life. Move from easy to complex and visit you muse and you think of what no one has! Good luck and interesting ideas.