Independent sofa dragging. Drawing a sofa at home - the choice of material how to replace the upholstery with your own hands and the cost of the restoration

One of the update methods soft furniture It is replacing its skin. You can use the services professional masters, And you can decide the sofa with your own hands at normal home. The event is quite troublesome, but not requiring serious physical efforts.

Sofa Upholstery: A - Soft and Upholstery Materials; B - cut; B - the order of upholstery and drying.

Preparatory stage

Cosmetic repair usually assumes only the replacement of an old sheat or even fixing the new material on the old one. For example, replace wallpaper on the walls. Capital - complete or partial replacement not only the top of the upholstered furniture, but also fillers.

For preparatory stage required:

• passatia;
• screwdriver Set;
• a set of keys;
• a hammer;
• centimeter or roulette;
• leaf of paper and pencil.

It is also better to stock in advance boxes or bags for storing fasteners. With the disassembly so old furniture May be needed vinegar. To dismantle the steamed rust fasteners, it is sufficient to moisten them with acetic acid.

Does not hurt the presence of a vacuum cleaner or brushes and a damp cloth. With their help, you can immediately remove the furniture design of garbage and dust detected in the hard-to-reach scan of furniture design.

1. The sofa disassembles - the sidewalls are dismantled, other elements of its design. Carefully removes the skin. The goal is to determine the true state of the seat and back filler, ensure the convenience of the necessary measurements. It is desirable not to remember the sequence of furniture disassembly, but also to record it in the most detail. All fasteners should be immediately folded in boxes, bags with appropriate marks.
2. Measurements are performed. Usually under the upholstery of the sofa are layers of foam rubber, batting. With the help of a centimeter is determined, some sizes are needed for the restoration of the seat, backs. The results of all measurements are also fixed on paper.

When determining the sizes of chicks of the new upholstery fabric Be sure to take into account the features of the attachment of the old. In order to save, some manufacturers do not convey its edges, which then "scribble". The seams "in principle" also do not extend the service life of the upholstery.

Back to the category

The process of skin sofa do it yourself

Before you decide a sofa, you need to inspect its design for the subject possible defectsdamage. If necessary, carry out repair work.

The replacement of the foam rubber is carried out entirely. Do not try to save, lining pieces of new material for the sold places. An additional layer of wattin and burlap will not only extend the service life of the upholstery, but also provide comfortable conditions During rest and sleep.

When calculating the number of materials, it is necessarily taken into account:

• inputs on the seams - 1-1.5 cm;
• binding on the edge - 1-2 cm.

To decide the sofa, you need to purchase not only foam rubber, batting, upholstery fabric, but also:

• threads - better categorous;
• ruler, triangle, tailor chalk or a conventional color pencil, contrasting the color of the chosen upholstery;
• glue for fixing foam foam sheets on the sidewalls;
• glue bf-6;
• good scissors for fabric;
• wallpaper cloves or construction stapler.

With the observance of the main Portnov Regulation "I will defaminate 7 times, 1 - a revenue", neatly disintegrates the canvas of the foam rubber, wattin and upholstery fabric.

Sowing edges are better to undergo an overwheel or zigzag.

Covers are sewn on the sidewalls, other necessary seams are made. The costs of time and forces on a preliminary ironing of upholstery tissue and seams with a bitter will pay off in the process of its attachment.

One way to extend the service life of the upholstery is to strengthen areas located on the corners of the furniture. To do this, they are tracked from the inside or glued with glue bf-6 patchwork from burlap or a piece of upholstery fabric left after cutting.

1. Falone sheets are stacked - usually only on the mattress, sometimes on the sidewalls.
2. Watin is put on the sofa mattress, and its edges are attached to upholstered cloves or staples. You can hide the sidewalls by Vatin, if they did not lie to the foam rubber.
3. All sofa elements are squeaking. It is not necessary to sew caseine covers, you can shelter them, applying the burlap of the mustache. The magnitude of the fattest is about 2 cm. The burlap must completely close the batting.
4. Clean skin is a covering with a bottom cloth, the edges of which are converted if necessary.

All canvases are tensioning evenly and neatly. Then the sofa design is going.

If the sofa is planned to be sewn with their own hands on top of the old sheathing, then careful cleaning of the second from contaminants is pre-performed. Highly worn places are strengthened with pop-bays that are sewn or glued. Plus this option is to minimize material and time costs. Minus - the old clusters of dirt and dust remain inside.

Surely everyone in the house has upholstered furniture for which several years in a row falls oblique looks, because and throwing a hand climbs, maybe antiques, or a gift to the beloved mother-in-law on her birthday, and it is impossible to use it, because the gloss is not the wrong remained. You can remove this issue once and for all - decisively and solemnly take responsibility for yourself and save the family from the creaky Tirana. And you can try to drag the sofa and give it the second life. At the very least, you can try to throw away anyway.

Spring Sofa Hauling, Video Lesson

Before dragging the sofa with their own hands, it is worth a hundred times to think if it is necessary to do this and how high value it is from the point of view of upholstered furniture, from the point of view of the space and convenience of use. There are cases when the whole family is just waiting for the moment that it is that the one that will fall off from the sofa, which will overflow the bowl of universal patience and the hated creak and inetertic tormentover for applause will be put on the garbage. Happens. But it is always easier to throw it easier, so if the sofa somehow justifies its existence, (the same mother-in-law, for example, will be able to spend the night on it when the lacaround will arrive at visit) it is possible that it makes sense to think about having a sofa with your own hands step by step video we placed below, extended it happy Days In the apartment.

If this video inspired the way has worked out, then you can try to do something like your own hands. With considering useful Sovietswhich give experienced furniture makers.

What is the material for upholstery to choose

In general, the choice of fabric for upholstered furniture is an ungrateful matter. It is very difficult to estimate the effect that it will produce in the complex with our old ruin. Here you need to take into account the mass of the nuances:

Also, a lot depends on where the sofa falls after a hauling. We mean the room in the house. If this is a sofa for the kitchen, then no woven material and speech can be. They quickly do smells and then fate the sofa will decide even faster. In the same permanent humidity, the risk of spots on the kitchen sofa from liquids and fat, rather, inclined to the fact that the upholstery material should be inexpensive dermatin or something like that.

Materials for the sofa in the living room

If the fabric under the skin passes according to the interior of the living room, then it makes sense to choose dermatin more expensive. At least, it should not spread from the tension of its substrate should be moderately durable and moderately soft. Smell. This is a cheap dermatin beach. It is almost impossible to raise it, and if in the car somehow you can fight him, there and your smells are enough, and it will disappear in the car faster, then the living room can turn a few months in a small branch of the chemicals. Joy from tea drinking on such a sofa, most likely there will be little.

There are woven water-repellent fabrics with special impregnation, but even experienced furniture makers are not always taken for a drawing of such material. It may be capricious than the fattest tapestry. This is also worth considering. The rigidity of the foam rubber is equally important. As a rule, for the effects of this kind of products, the foam rubber is chosen or with HL rigidity or the most rigid EL. Too soft, foam rubbed quickly and folds, too cheap will spread out, it will be too thick to form, and too thin will lead to a rapid wear of the upholstery, and it will not be comfortable to sit on it.

Tools and Technological Thread Threads

Hauling upholstered furniture with your own hands, and the sofa is all the more, it is impossible without minimum set Tools. Of course, you can do, for example, without a stapler, but then the hauling will take a hundred cosmic years and will turn out of pleasure in a grave service. Here approximate set Tools that are necessary for having a sofa of any configuration:

Talking about the technological aspects of the halter without knowledge of the design of the sofa - sinful tribal, so we will limit ourselves general Recommendationswhich give experienced furniture makers.

Actually, that's all you need to know how to pull out the removal of the old sofa in the pit and save a little on buying a new one. And saved money can be spent on the purchase of a good professional stapler. You never know what else will have to drag.

It's no secret that over time, the upholstery of upholstered furniture loses its original appearance, especially if there are pets in the house, the old furniture often does not fit into new interior After repair. In this case, it is not necessary to change the existing furniture on new interior items.

More simple decision There will be replacing upholstery fabric and soft lining of upholstered furniture. In most cases, it is not difficult to do it. In this small review is given detailed instructions How to drag the sofa with your own hands.

Self-drying of sofas

Update the coating of upholstered furniture is quite possible to do yourself either by professionals. When performing work, you can face the following difficulties that are difficult to overcome without special skills:

Problems may occur at the first stage on the disassembly of furniture. Sometimes without special skills and tools to do it problematic. Therefore, deciding this work to check your strength, having pulled at least a stool. On this simple task you can hone the technology and choose the tool.

Details of the sofa may have complex geometric shapes. Therefore, it is difficult for them to make the correct pattern, and then carry out the correct stretch. It will be easier to make the pattern if it is copied with an old upholstery.

Reduce the sofa a book consisting in essence of two rectangular halves and two soul mates, much easier than the non-folding sofa with large armrests and additional pillows or in the case when the pattern consists of several pieces of fabric.

When restoring the old furniture, it is not enough to replace only the upholstery. Often it is necessary to replace the filler, the repair of the frame and even the replacement of the springs in old sofas.

Antique furniture requires a very careful circulation, its repair and update is better to entrust professionals.

For decorations, materials are complex in operation. With skin, it is much more difficult to deal with a fabric. For the first sofa pans, it is better to choose tissue materials.

Technology performing work

This task is time consuming, but quite performed work. Reduce the sofa at home is quite simple, if all steps need to be accurately and in accordance with the recommendations and instructions.

At the first stage, the sofa is disassembled: overhead elements, seat, backs are removed. The fasteners will be useful when assembling, so they are gently assembled.

Next, the old upholstery is removed. This is done using an ordinary thin flat screwdriver. The coating cannot be thrown out, since the new fabric blanks will be cut in its form. After removing the coating, check the condition of the inner design and clean it.

Mandatory replacement requires foam rubber, as it has a small service life compared to natural materials. Instead of foam rubber, a relatively recently appeared synthetic hybecue, which has a long service life. In addition, you need to correct and check the mounting of the metal springs.

Then make patterns from a new material. They are very easy to do using the removed old upholstery, you should only add a few centimeters on each side to the allowance, the excess of which is then cut off. The same way All fabric blanks and pillows are manufactured, and for the sofa itself.

The upholstery fabric is better to acquire with a small margin. Since with the inaccuracies of the size and calculations, it may not be enough and in the worst case it will not be purchased.

Depending on the purpose of the furniture are purchased various materials. They can be from breathable natural, but not wear-resistant fabric, ideally suitable for sleep, or can be made of wear-resistant skin suitable for long-term continuous use, for example, in organizations.

Buying fabric or skin is a very responsible event, so before dragging the sofa should study the photos of various design solutions, pick up your individual style, choose a suitable tissue and shop.

Selection of material

The choice of materials should be carried out with great care. You need to pick up fabric not only by their design and a combination, but also by their quality.

the cloth good quality It should not smell dramatically. The pile must be firmly fixed on the basis, there should be no molting. It depends on its fabric pattern, since in some embodiments it is required to set the pattern in a specific direction.

Sintepon is also not the same and requires a choice. When purchasing it, it is necessary to pay attention to the fact that it should be white, odorless, durable, not driving in his hands.

Porolon also has a different quality. Basic characteristic sign is the size of bubbles. In high-quality foam, bubbles have a small size, and in the lower quality material they are large. The size of the bubbles, oddly enough, determines the durability and wear resistance of the foam rubber.

Upholstery fabric is the final stage and is carried out using construction stapler And glue. This operation is easier to perform if you make photos of furniture before disassembly.

Independent furniture upholstery at home is quite fulfilled, but requires certain skills and patience. Carefully completed hauling delivers pleasure and save considerable funds.

Reading time ≈ 3 minutes

Significant wear of the tissue coating of the sofa requires repair of furniture and replacing the old upholstery. An independent hauling does not require special skills and can be completed literally for 1 day. When working, you need to take into account the accuracy of the removal of the old fabric and the correctness of the sewing of the new upholstery. If not only fabric was worn out, but also a filler, then it should be replaced immediately.

Features of the sofa drawing

First of all, the owners will need to remove the existing upholstery. It is necessary to perform a procedure very carefully: otherwise the fabric breakages and recreate the correct covers to individual parts will not work. The hauling of the sofa begins with its own hands from the gradual dissolution of the seams on all the details of the sofa. For example, removable pillows are processed separately, and solid pieces from the frame itself are removed together without breaking.

Additionally, self-hauling of the sofa may include a filler replacement. Worn sintepon or foam rubber should be carefully separated from the frame, trying not to scatter damaged material. His billet will be performed by sofa measurements. It is necessary to determine the dimensions of the required filler and its thickness.

How to make a new upholstery?

After removing the old fabric, it is necessary to perform its measurements and determine the desired length and width of the new canvase. Special attention should be paid to one piece. For example, those canvases that cover the back. Next, the sofa upholstery is carried out only after the material billet. For high-quality furniture updates, it is recommended to purchase tight fabrics: tapestry, jacquard, shenill. They have protruding patterns, so they will easily emphasize the new style stylist.

There is a special type - the terminal, which has increased strength and wear resistance. Such material is optimal for the upholstery of the sofa in the living room or on closed veranda, terrace. After the fabric harvesting, the work is carried out according to the following instructions:

1. Old upholstery is folded over paper (you can use large pieces of old wallpaper, posters), it will be burned.
2. From paper cut blanks for a new upholstery.
3. New parts made of purchased fabric are cut.
4. The covers on the back, the rear wall of the sofa, armrests are harvested.
5. Fissure elements are stitched and dressed on the sofa (when replacing the filler, you need to immediately attach it using a building stapler on a wooden frame).
6. Dressed on the sofa covers are stitched together, forming a new upholstery.

Led step-by-step instruction eliminates additional steps - Updating sofa pillows. Usually such work takes a minimum of time and is carried out last. Finished pillows are stacked on the updated frame.

Features of the game

To understand how to drag the sofa correctly and eliminate the wrong tailoring of parts, you need to add to study step-by-step master Class. The exact instruction will help to quickly and gently perform a drawing, prevent poor quality removal of materials or connection of parts. Additionally, before starting work, you should look at the training photos and video lessons: they will be no less useful in the work. Also owners should be taken into account the following rules.

Any thing with time comes into disrepair and upholstered furniture is no exception. But in the case of furniture, it is possible to restore its initial species and properties. This article will discuss the self-hauling of the sofa. How, what and in what order should be done, what materials to use.

Damage and types of repair

Damage to the sofa or other upholstered furniture can be different "severity." Depending on the existing injury, a different complex of work is required. That's what can be with your furniture:

So hauling the sofa may include different works. From just replacing the upholstery, until a full update, including part of the frame. The coolest part is with spring blocks. This is a long and painstaking work. If you are not fundamental to "historical accuracy" of your furniture, the spring block is easier to replace foam rubber or (better, but more expensive) furniture silicone. If you do everything correctly, the sofa will become even more convenient: the wrong reversed springs deliver a lot of inconvenience.

Types of "soft part"

IN general features Let's talk about what the seat and back of the sofa can be made. There are options:

• Without springs:
  • Porolon (polyurethane foam, still occurs the name of PPU) high density (still called furniture).
  • Foamed latex. For quality and convenience, it is better than porolon, but also much more expensive.
• With springs:
  • with classic springs connected to one block;
  • snake springs that support the foam / latex stuffing.

These are the most common types of sofa seats. In more expensive models The spring unit can be supplemented with a layer of PPU or latex, which makes the seat more elastic and convenient at the same time. When playing, then look at both parts, replace or leave - depending on the desire and possibilities.

But these are not all layers. In addition to the springs, PPU / latex still pave a synthetic hyprofhen or thermal (or ordinary felt). This if the sofa is more or less modern and not too expensive. The older exhibits may be a hooper or burlap, batting (or something very similar), horse hair, dried algae and other almost exotic materials for packing sofa. When repairing the sofa, they will need to be replaced by the same (if there is a desire to look for) or similar in thickness and properties. So, in order to understand how the sofa dragging should be done, first disperse that he is inside.

We disassemble the sofa and evaluate the scale of work

Hauling the sofa begins with his disassembly. In the process you can estimate the scale of damage and decide what exactly you will need to do. For this part of the work you will need:

• the screwdriver is large to unscrew the visible bolts (if any);
• a small flat screwdriver, pliers or a stave - to remove the brackets that the upholstery is attached.

The main thing is to remove the old upholstery. Then it becomes clear

Actually, everything. First we remove individual pillows if they are, removing the sidewalls. Here you suggest a lot of designs. Carefully inspect exactly something will find. In the presence of retractable parts, you can try to start with them.

Separate the upholstery

The next step is separating the fabric from the frame. It is attached by brackets to wooden Bruckam Frame. Staples fit flat screwdriver, pull out. Some can sit very tightly, pull them out easier to capture with a raised back of pliers or passages.

Fabric removed carefully, trying not to damage. It is later using it as a sample for a new couch. Under the upholstery cloth there are several layers. Maybe felt, sintepon, some kind of fabric. If the repair of the sofa was treated only for the sake of replacing the upholstery, see the state of these materials. If there are signs of wear, it is better to replace. After all, it will be offended if after a few months it will again need a hauling of the sofa, but already due to the fact that layers of lining were taken.

After the tissue is removed, just the time to evaluate which parts will have to change. With the upholstery and lining under it everything is clear. Pie is preferably preserved in the same composition. If old materials were used, which are not now on sale or they are too expensive, replace with modern counterparts. The main thing for folding sofas is to go out on the same height of the seat and backs that were before, since the folding mechanisms are calculated on certain parameters of the "pillows". In order not to make a mistake with the thickness of the materials, find the unworn (or least worn) areas and measure the thickness.

We estimate damage

This stage is needed if the seat of the sofa is uneven, there are humps and depressions, protruding springs (and below, too). In siduns, which consist only from the foam rubber, everything is simple: they usually go under the replacement. They can be made of high density foam rubber, having folded several layers, you can order a ready-made foam in the store selling furniture spare parts. Reasonably order by accurate sizes (Measure after removed fabric and all layers) latex mattress.

If there are springs in the sofa, removing all covering layers, get to them. If there are no burst springs, the frame and its connections are strong, without the backlash and cracks, the substrate under the springs in the normal state, on this can be stopped. We change the filling layers, sew a new case, stretch and fastened. This is over the sofa dragging.

One of the common defects of spring blocks - a broken spring is also such sofas - with spring snakes, which are attached to the frame and give elasticity to the next to the foam mattress

If there is at least one damage from those listed above, the spring unit will have to be separated. It is attached to the frame frame with U-shaped brackets or nails. Now you have completely disassembled your sofa to the components. Next - replacement and repair of damaged parts, and then reverse assembly.

Classic Sofa Cake with Spring Block and Possible Problems

To understand how to repair the sofa at home, you need to know which layers of materials and in which sequence is necessary. For example, in a sofa seat with a spring block, a sequence will be like this (bottom up):

1. Frame frame or wooden bars. The plywood frame is more reliable, but it is longer and harder to do. Therefore, bars from pine are usually used. They are connected on the principle of spike-groove, sizing with joinery glue. If you wish, the compound can be enhanced by ducts or corners (aluminum).

   

2. Foundation for spring block. There may be options: lamella (planks of elastic material), fiberboard, plywood. Most a budget option - DVP, the most expensive - slave. Lamels are attached to special stops (latherters). When using plastic stops, there is a possibility of their breakage. At the same time, poor-quality lamellas can progress (in the normal state they will be arched a little up) or break - to reduce costs, they often have great gap. All this leads to the fact that the seat of the sofa is pushing. Instead of wooden lamellae can still stand snake springs. They also have sufficient elasticity, but are less. Problems with them are the same.
3. Spring Block itself. The unit can be with independent or dependent springs. The first is cheaper, the second is well supported by the body. Such mattresses are called orthopedic.
4. Felt or tight fabric (Tick is suitable, the other is similar dense fabric). This layer is needed so that the springs do not sue the foam rubber.

   If the fabric is thin, it breaks down, then the foam rubbing will begin. But this is not the saddest - lamellas arched in reverse direction. In the normal state they should be curved up

5. Polyurene Foolder (PPU, foam rubber - all names of one material). A special tight foam rubber is used. If you choose, except for the density, see such an indicator as the durability coefficient - the higher the figure, the better (and more expensive). This indicator displays how long the foam rubber after the load is removed the initial shape. Its thickness is taken according to the original, factory cake. It is possible to make a thicker without restrictions. You can only on a soft furniture that does not unfold (Banquet, Sofa, Chair).
6. Syntheton. Need to ensure that the fabric is not "washing" PPU. It is usually glued on a layer of foam rubber - so that when operating it is not going to the fold. Glue take in the canister.
7. Upholstery fabric. Best - Tapestry, Shenille. They do not raw, it's easy to sew from them. Flock and Jacquard - good fabrics but part "crawling" on the seams. Therefore, when sewing, the seams need to be strengthened. By the way, sewing upholstery for the sofa is better than TYTAN brand special threads. Ordinary, even thick, quickly break.

These are all layers and their features. You can add something (for example, a double layer of syntheps), clean - extremely undesirable.

Device of the sofa on the springs "Snake" and the options for its recovery

Springs "Snake" in expensive models are used as an additional means to increase elasticity. In budget models, a foam block can be laid on this basis. They are attached to a wooden or metal frame across the seating - each spring is separately. The installation step depends on the planned load. If your sofa began to be saved, or the springs lost elasticity, or broke - the replacement is treated.

To increase the elasticity and extend the service life, when the sofa is a sofa, the number of "serpents" can be increased. Another option is the transverse strengthening of rigid corsage ribbons (which are used for straps on bags, backpacks).

The ribbon is nailed on one side to the frame. Professional furniture makers then stretch it with the help of a special tool, but can replace it with an ordinary bar wrapped around in the middle emery paper with large grain. On this bar, you wrap a couple of turns of the ribbon, with two hands pulling (follow the frame so that the frame is not beaten), the tape is fixing with brackets or nails, let go and cut the surplus. The same method is suitable for improving the service life of the mattress on the lamella.

Example of repairing a sofa with step-by-step photos

The old sofa became completely uncomfortable, began to fall in places and creak. Buying new no opportunity, it was decided to drag and change the upholstery. As usual, hauling the sofa begins with disassembly. The first shot legs. The railing was attached to two large bolts, they were unscrewed and removed without any problems. It is also easy to disassemble further - in turn, unscrew the appearing bolts.

When they separated all the components, they removed the old upholstery. The brackets were removed easily - a frame of a pine timber. The spring block itself was without defects, but in the frame of the crack, one of the BRUSEV frame was led, the Fiberboard she looked, although it cost without cracks.

Repair of carcass

Since the frame carries the main load, the damaged items are better replaced. They carefully measure them schematically draw, put the dimensions in millimeters. With the drawing we go to the joinery shop. Note special attention: Wood must be dry, preferably chamber drying. If you know how to work with the wood, you can make it yourself.

Connect the frame is decided, as it was, on the spike / groove, wrapped with carbon black glue. But in order not to be broken, the compound was reinforced with metal wrenches.

First, the connections are sampled, clamped into vice. Under the wanking, the hole of a small diameter is killed, the wanking is smoothed. Frame stands in the vice before the drying of the glue.

As a basis for a spring block, we will use a patch with a thickness of 4 mm. Sheets are standard, slightly more than 1.5 meters, and the length of the sofa is almost two. It turns out two pieces. The joke of pieces to make better on the jumper, so more reliable. Cut the rectangles desired size, we wrap the frame with joinery glue, put the Faneru, nail small nails. Length of nails - so as not to stick out outside the frame. The place of the joint is additionally pinching the bar (50 * 20 mm).

The updated sofa will serve in the country, so we try to make the budget minimal, we use an old blanket instead of a backing under the spring. It is well stretching, fastening brackets with manual.

Spring base - an old fleece blanket

If there is an opportunity, it is advisable to put a thermal flock here. He is more reliable and not so expensive. It is cut out in size, straighten and nailed around the perimeter. You can use brackets or cloves with large hats.

Repair and secure spring block

For fastening the spring block, you can use powerful U-shaped brackets, and it is better if the legs are sharpened. But the stapler does not work with such, therefore, from steel wire with a diameter of 1.5 mm, they cut the brackets, clog the hammer.

In addition to fastening for the frame, the springs are still fixed by kapron bags. Twitage was taken, folded in two layers, fixed all the same wire brackets. The drawing is tensioning so that it does not give the springs, but the tension should be sufficient so that the block "did not go."

On top of the springs, some dense material should be put, it is usually felt. IN this case Used old flooring. Something like felt. It is quite dense and durable. We fold into two layers, cut out in size. This layer must be attached to spring block. The coating is dense, the needle will not drive it, even Gypsy. It is suitable for a large diameter, but it is not. I pierce the coating of a nail that pushes a screwdriver handle. In the holes done by the holes, we felt a thick thread. Step step - about 3.5 cm. To speed up the process, we use several nails at once.

Further "according to plan" should go foam rubber, on top of which they put a synthetic procession. In this project, it was replaced by two layers of a tight-elastic material that was long stored in the attic. Instead of synthet board, another old blanket is used. In order for the blanket did not go, it grabbed it along the perimeter with threads (in conventional technology, the synthesis are glued to the PPU or latex using the glue from the can.

Case and tightness

To see this sofa turned out to be easy: a form is simple, without jewelry. The old case of the strollers, they made a pattern from a new, not very expensive upholstery fabric. In the place, which falls on the corner of the sofa cushion / sidewis with the insoli seed a dense tape - so that the fabric does not swing. The fabric is inexpensive, so the edges had to be subjected to not poured. Often they are left untreated.

The finished cover was laid on the floor, the restored part of the sofa was laid into it. At this stage, it is important that the fabric is stretched evenly and does not frown. Began to sweep the case from the middle, moving towards the edges. Used brackets with thick backs - not to damage fabric.

Similarly restored the sofa back, covered the armrests, then all parts screwed to the folding mechanism. The thickness of the pillows coincided, so there were no problems.

The halting of the sofa is over. The result is verified 🙂

According to the test results: the seat was harsh, but for the tired back - the most it is. For home, of course, it is better to put a foam rubber, and for lovers of comfort - Latex.