Styrofoam board ceiling painting tips. Is it possible to paint the ceiling tiles: we find out, evaluate, choose the material How to update the ceiling from foam tiles

Foam boards are widely popular due to their affordable price, quick installation, good heat and sound insulation characteristics, low maintenance and durability.
Consider further how to make our ceiling even more beautiful, because thanks to the paint you can achieve excellent result and without expensive repairs.

Styrofoam Ceiling Tiles

Before starting work

At the very beginning, you should remove all unnecessary:

• tables
• Bedside tables
• Carpets
• Sofas

Then cover with a film all objects that are problematic to move to another room.

Preparation for painting boards

After that, the foam should be cleaned of dirt, dust, cobwebs, a vacuum cleaner, water, a sponge are suitable for this purpose, which can then be used to clean the primer joints.
Styrofoam that does not hold well is dismantled and glued back, but it is necessary to apply glue to it over the entire surface, and not just along the edges and center, as many do.
You can try with a screwdriver the places above the baseboards, that is, the angle between the wall and the ceiling, if voids are found, the baseboard should be removed, tapped with a hammer to detect voids, all suspicious places should be opened and strengthened qualitatively.

Unreliable skirting board needs to be glued again

If an unreliable fastening of the foam plinth is found, glue should be applied over the entire adjacent surface, and not pointwise, in which many also make a mistake by applying drops too far apart.

You need to carefully look at the adjacent surface on the baseboard, on ribbed foam baseboards you can miss by smearing glue a little lower or higher than necessary. It's also important to wait about a minute for the glue to dry so that it doesn't stack down during installation.

Glue application methods

You can use acrylic adhesive to attach tiles to the ceiling. In structure, it is similar to a thick putty, it is applied quickly and does not require additional drying time.
After application, the tile does not need to be held for a long time, it is enough to press firmly 1 time, after which it does not fall down. But it is more expensive and harmful to the environment.

Ceiling preparation

Styrofoam must be primed before starting work, to increase the life of the paint.

If we paint the ceiling of foam boards without applying the mixture, then:

1. Paint consumption will be large.
2. The porous structure of the foam plastic contributes to the worst fixing of the paint on it, over time it will begin to lag behind and burst.

The most vulnerable spot of the paint is at the joints between the plates, in order for the paint to hold firmly for a long time, it is necessary to putty all the joints - between the tiles, the plinth.

Ceiling preparation

Puttying

For putty work, it is highly desirable to have a powerful lamp so that it is better to see all the flaws at different lighting angles.
Work on skirting boards is carried out with a small spatula 30-40 mm wide, with a finger the putty is evenly distributed along the seam, make sure that it penetrates well inside. After that, with a spatula, we draw along the seam, removing the bulk, after which - with a sponge.
Work between the plates is carried out faster, without a spatula, the mortar is applied evenly along the seam with a finger, after which the foam is wiped with a sponge.
Then you need to wait a day until the putty dries and clean it completely fine-grained sandpaper, but carefully - so as not to scratch the foam strongly.

Puttying

Priming of foam boards

After that, the surface should be primed, with a brush - all hard-to-reach places, with a roller - the main area.

Before work, the roller can be wrapped with tape, and then unwound, it helps me to remove all the dust and fallen pile from it, which then necessarily remains on the paint.

When working near windows and doors, it is important to direct the roller parallel to them so as not to splatter the surface, even if they are covered with a film - this will help protect the film from a primer that can corrode it.
For foam, 1 layer is enough, given its low absorbent properties. Even 1 layer of our mixture will seal the ceiling well enough.
On the basis of the roller when priming the foam ceiling, you can put on plastic cover, from under the same primer, so that the mixture does not flow onto your hands and does not stain your clothes.
After processing the foam plastic with a primer, contrary to many factory recommendations, I expect about a day for the plates on the ceiling to dry completely.

Primer

The painting of the ceiling tiles is carried out with the same medium-nap roller that was used to prime the foam, but it must first be washed with plain water and wiped with a dry cloth.
Be sure to take into account the compatibility of paint, primer, and putty, the durability of the coating depends on this. You need to carefully read the instructions, you can use mixtures of the same company, so we will definitely have a guarantee that the paint will stay on the ceiling for a long time.

Ceiling tile painting

For the paint to cover well small parts ceiling, use the same small brush. There is no need for many brushes that many masters have for the collection, two are enough - one wide, in case the roller becomes unusable, and one narrow - for hard-to-reach places.
In order for the paint on the ceiling to be well absorbed into the surface during work, one should not rush. To begin with, we paint all the elements that are hard to reach for the roller - skirting boards, linings, places around the lamps. Do not forget that near windows and doors you need to paint in parallel, along the window, but not across - otherwise the paint will stain the surface, after which we paint over the remaining plates with a roller in one layer.

5 ways to perfect color ceiling plinth

For many residents, the ceilings in the apartment are lined with special foam tiles - a light and cheap material. To extend the service life, it is covered with paint. But not all compositions are suitable for this type of finish.

How to paint a tile ceiling

The need for additional processing is due to the following reasons:

• defence from negative factors environment;
• giving new decorative features.

They paint tiles to protect them from excessive moisture, temperature changes, and mechanical influences. Such a ceiling can be washed, it looks neater.

A certain color scheme is able to emphasize the color scheme of the room. A layer of paint of any shade will not allow white foam to turn yellow.

How to cover ceiling tiles? They do this more often with water-dispersion compositions, which are different colors. The durability of the coating depends on the quality. Therefore, choose a paint of good density. It must be resistant to moisture and detergents, look presentable, should not fade.

Not every material is suitable for processing foam elements. It is forbidden to use pigments containing acetone, as it dissolves the tiles. Not suitable for this purpose alkyd paints, it is not recommended to paint the foam coating oil formulations, they do not give a durable layer. Better use for decorative finishes water-dispersion substances - water-based and acrylic paints. The former have the following positive qualities:

• environmentally friendly, do not contain toxins, harmless to humans and pets;
• dry quickly;
• easy to apply with a roller or brush;
• moderate glossiness and good density;
• the price is relatively low;
• high vapor permeability;
• microorganisms do not multiply on the surface;
• fireproof;
• wide color range.

The disadvantages include:

• instability even dried paint to moisture;
• poor adhesion to a previously painted surface;
• a thick layer peels off;
• easily contaminated.

Acrylic paints are made from polyacrylates. Advantages:

• moisture resistance;
• elasticity and strength;
• not afraid of temperature changes and ultraviolet radiation;
• a variety of bright colors;
• hygiene;
• environmental friendliness;
• dry quickly;
• ease of application;
• heat resistance.

Flaws:

• high price;
• poor vapor permeability;
• a thick layer of paint may peel off.

Essential for painting work tools:

• paint tray;
• goggles;
• ladder;
• roller and brushes;
• overalls.

How to paint the ceiling

Before work, furniture and appliances are taken out, the rest of the items are covered with a film.

The same should be done with the walls to protect them from falling paint. You need to dress yourself in special clothes. You will have to work from a stepladder, firmly standing on the floor.

The joints between the individual tiles are sealed with putty and rubbed with fine sandpaper. This will enable the surface of the ceiling to become smooth and completely even after painting.

You can cover the foam tiles with an acrylic composition. The surface is pre-primed. The paint is diluted with water to the desired consistency, then poured into the paint tray. To check the quality of the mixture, a small piece of tile is covered. They process the ceiling with a roller, use a brush in hard-to-reach places. The tool must be moved in one direction to achieve the desired shade. After the first layer has dried, a new one is applied perpendicularly.

To cover embossed tiles, it is better to use an airbrush. He will handle all the bumps.

In addition to the acrylic composition, a water emulsion is used. Tools and equipment for painting will need the same ones. The process will be as follows:

1. The corners around the entire perimeter of the ceiling are processed with a brush so as not to stain the walls with a roller. The width of the strip can be 3-5 cm.
2. Further in the direction from the window, three layers of paint are applied with a wide roller. Each subsequent one is placed perpendicular to the existing one after it dries. This takes about 8-12 hours.
3. During the drying period, drafts in the room and hit on the ceiling should not be allowed. sun rays. A completely dry ceiling coating will give the room a completely new look.

Conclusion on the topic

Many people use foam tiles in the decoration of the upper floors. She long time retains its appearance. It is possible to update the material with the help of water-based or acrylic compositions. They process the foam ceiling with a roller, brushes and a spray gun. A sponge is used to highlight some patterns on the surface.

It is not necessary to cover the laminated tile layer at all. It keeps its color for a long time. But over time, the laminate wears out as a result of repeated washing of it. chemicals. Then this tile needs an update. Possible variant- Paint again. Acrylic compositions are best suited here.

A common finishing material for the ceiling is tile. This is due to its simple installation and reasonable price. Most often, the store offers a wide range of white foam tiles with a certain relief pattern. But white ceiling already so familiar to everyone that many owners want to paint it in the color necessary for complete harmony in the interior. Thanks to painting, you can significantly expand the space and completely change the original appearance of the ceiling.

Many people have the following question at the stage of tile installation. Is it possible to paint ceiling tiles Styrofoam and will it harm the surface? The most common foam tiles can be painted water-based paint. It fits perfectly on the material and is safe for human health. There is also a type of finishing material that can only be painted with acrylic paint. But this type of tile is rare on the market. Seamless tile it is necessary to cover with color, since its properties will appear only after painting.

What materials to use for painting?

What can be used to paint foam ceiling tiles? Many people face this issue at the stage of repair. If consider great amount types on the market, after all, the best tiles for mounting will be acrylic and water-based. When choosing a material for painting, it is necessary to consider the following qualities:

• color fastness;
• moisture resistance;
• glossy indicator;
• consistency density;
• easy care of the painted surface.

Material selection

What paint to paint the foam ceiling tiles? It is necessary to choose based on her qualities. Before painting, you should decide how to paint the foam ceiling tiles, having studied in detail the features of the most suitable materials.

The most popular option is acrylic paint. It has earned national recognition for its excellent quality, wide color palette and fast drying.

Also, the choice of acrylic is stopped due to some properties:

• Resistance to external factors;
• Ease of application;
• Harmless to health;
• Does not have a strong odor
• Vapor permeability;
• Good level of elasticity;
• Wide range of colors.

When applied to foam tiles, the paint lays down in an even layer, while not collecting dirt and dust. Temperature changes are not terrible acrylic, as well as moisture. But, like any material, it has certain disadvantages:

• wears off over time;
• high price.

Based on their last drawback, a more economical material can be considered.

The next common paint material is water-based paint.

Advantages of water emulsion:

• attractive price;
• high level of vapor permeability;
• easy application to the surface;
• safe for health.

Flaws:

• poor moisture resistance;
• accumulation of dirt on the surface.

There is another option than to paint the foam ceiling.

For work, you can use enamel or oil-based paint. This will significantly save money, but for health, this option will not be the best. When choosing a paint, everyone is repelled by its advantages and disadvantages. In order to choose the right one, you can seek advice from a specialist, as well as look at samples of the painted surface in the store.

Painting foam tiles

How to paint the ceiling of foam tiles is up to you. This can be done prior to installation, which will make the job easier. But some still adhere to the option of painting on the ceiling. Of course, the option of painting before installation is much easier. How to paint the ceiling of foam tiles if they are embossed? In this case the best option the use of a spray gun will serve. It will evenly apply the paint material to the surface, and will not leave smudges and streaks.

Why do you need to paint the baseboard at all? Upon completion of the repair work on finishing the ceiling, installation and painting of the skirting board will be the last step. It is painted after the completion of the walls, ceiling and floor. A convenient option would be staining before it is installed. Why paint skirting boards?

• white color will turn yellow over time;
• painting hides defects at the joints between the skirting boards;
• due to coloring uneven surface acquires a beautiful appearance;
• the painted surface is easier to care for.

What paint to paint?

Before you go to the store for the material, you need to decide how to paint the foam ceiling plinth?

With a huge variety of palette assortment, should take into account their basis. In order to choose the right one, you need to consider important points. Paint based on white spirit cannot be purchased. It will simply dissolve and ruin the baseboard. In order not to be mistaken with what paint to paint the ceiling plinth, study the composition of the paint material.

Excellent options for painting work are paints:

• latex;
• water dispersion;
• acrylic.

These paints are water-based, so applying them will not damage the condition of the Styrofoam baseboard. If the color scheme of the samples presented does not suit you, then you can use white paint and color. You will be able to achieve the desired shade yourself so that the question of how to paint the foam ceiling plinth is settled. Thanks to a huge color palette using blending, you determine the brightness and saturation of the color yourself. Specialized stores also offer a service for selecting a certain shade. Can be used for coloring paint in cans.

A convenient option for staining is coating before it is installed. If you have decided how to paint the foam ceiling plinth, you need to clearly distribute the stages of painting and installation work.

Painting skirting boards before or after painting?

Certainly, convenient option will be staining up installation work. However, the properties of skirting boards are such that joints appear at the points of their connection, which will still have to be repainted. Therefore, many paint the baseboards after installation.

What option to paint the foam baseboard is presented in many ceiling repair manuals. How to paint a foam ceiling plinth, see the video below.

The process of updating the interior can include not only the creation of fundamentally new coatings wall panels and ceiling, but also painting tiles, Styrofoam ceiling tiles that were pasted a few years ago. This will not only provide an opportunity to update the interior with minimal cost, but it will also allow you to give new notes to the design, spending only on the purchase paintwork materials. Deciding how to paint the foam ceiling tiles can be done not only on the basis of existing considerations for updating the interior, but also in order to apply a protective and decorative layer on it at the same time.

Styrofoam tiles on the ceiling are not only possible, but also necessary to be painted if its replacement is not provided for in the near future. Painting foam ceiling tiles is possible both when its surface is laminated and when the ceiling covering was originally intended for painting. In both cases, the choice of a suitable decorator depends on the type of slabs used, as well as on the imagination of the owner of the home, who decided to breathe into them new life.

When asked if Styrofoam ceiling tiles can be painted, any repair and finishing work will definitely give a positive answer. Some manufacturers initially label such products as intended for painting, because foam tiles are produced predominantly in white or yellowish color, and in this form it looks quite cheap, treacherously showing the texture of the original material.

A rich selection of coloring agents and their diverse range of colors enable a person who decorates his home to choose not only any shade of the visible spectrum, but also the most optimal coating in terms of durability.

If you decide how to paint foam ceiling tiles while standing at the shelves of a building supermarket, you can be somewhat confused by the range offered. Modern polymer chemistry and the construction industry have made it multivariate and hassle-free to choose the right remedy to solve the problem than to paint foam ceiling tiles.

Existing paints and their suitability for the process

The foam ceiling, unlike plastic or plastic that can only be replaced, is painted with water-based paint, while acquiring a new and expensive look.

When deciding how to paint a ceiling tile or foam ceiling, you can only focus on the state of the budget allocated for this. The most democratic and simplest type of tile coating is water-based paint. Should be excluded from the general range oil paints, since it is generally accepted that they can damage the painted foam during the drying process, alkyd and containing solvents such as acetone are not very suitable for the same reason.

Water-based paint is one of the most best options when working, the purpose of which is to paint the tiles.

Water based paint

These compounds, used with success for decades, along with the development of the construction industry, have acquired excellent performance properties and are perfect for ceiling tiles made of a certain material. When deciding how to update a decorative foam ceiling, the first thing to think about is good old-fashioned water-based paint. Water emulsion in this process can achieve excellent results.

Moreover, paints from this category have many excellent properties in operation:

• resistant to the growth of mold and fungus;
• relatively fireproof;
• relatively cheap;
• differ in duration of use;
• extremely easy to use;
• easy to apply to the surface with any suitable painting tool;
• available in a wide range of colors;
• dry easily and quickly;
• the surfaces with which they are painted can be washed during operation.

Of the few disadvantages in use, only poor adhesion to previously painted surfaces can be recalled, but if foam tiles have not been painted before, you can safely opt for this category. It is absolutely hassle-free to paint the old coating and breathe new life into it with the help of such compositions, if there are time or funds restrictions.

On the video: how to paint foam products.

Polyacrylates as the optimal solution

The second group, more modern and relatively new technologies, in the manufacture of which polyacrylates are used, are acrylic paints. When deciding how best to paint an old foam tile, it is worth remembering the undeniable advantages that such paints have. An alternative to acrylic paints is possible only when the price component plays a decisive role. In all other cases, a person familiar with the merits of paints with polyacrylates will decide that it is worth covering with compositions from this group.

Such paints have undeniable advantages, they are:

• bright;
• hygienic;
• fade resistant;
• are not subject to temperature influences;
• immune to moisture;
• dry well;
• elastic and durable.

This means that in creating a protective layer, you can not only not worry that the tile will be damaged, but, on the contrary, will sparkle with new colors and take on the appearance of a new one for quite a while. long term. Moreover, you don’t need to purchase any specific means and methods on how to paint the ceiling with such paints, and you can get by with old, proven painting tools.

What is easier and how to paint

The process of painting with water-based paint is quite simple and cheap, but it will take some time. The problem is not that it is necessary to cover furniture and walls from paint. Even if this happens, it is easy enough to remove with soapy water. No water emulsion pre-coat is required, but to create a uniform and good coverage, it will need to be applied 2, or even 3 times.

Each of these layers should dry for 10-12 hours before subsequent application. And this means that at least a day will have to be devoted to applying layers of paint. Morning, evening and next morning.

To create an even layer acrylic paint the surface will have to be coated with an acrylic primer, which will give the base coat greater adhesiveness. But, if this is not done, the paint will have to be applied in several layers in the same way. It is this circumstance that complicates the use of latex paints for painting the foam surface, because the application of latex in several layers can lead to peeling of only the applied coating.

Acrylic paints dry faster than water emulsions, but have a more specific smell, so the choice of means for decorative renewal is up to the owner of the room.

Specialists in repair work It is advised to use a roller on a tile with a uniform surface. If the tile has a patterned relief or imitation of stucco, then it is better to paint over the patterns and curls with a brush. There are some professional secrets for making the ceiling more decorative.

Tiles with a flat surface can be painted in their original form, rough ones should be primed. For this purpose, you can purchase ready-made liquid primer and apply it with a roller with a long or medium pile.

If the ceiling was light and at the same time there are patterns imitating molding on it, they can be painted with golden or silver paint using special thin brushes and paints called glazes. This will not only create an original visual effect, but also draw attention to those details that were previously not noticeable due to the uniform texture.

The essence of repair does not always consist in a radical replacement of an existing one, especially if there are neither special means nor a large number time. And in what is already there, you can breathe new life.

What you need to paint a foam baseboard (1 video)

A ceiling with polystyrene foam tiles is affordable, convenient and creative. It doesn't matter what surface it has. To keep the finish in its original condition, it is enough to paint the foam ceiling tiles with the right composition.

What tiles are suitable for the ceiling

Styrofoam ceiling finish differs depending on the type of surface of the tiles used. Three variants of ceiling tiles are used, among which are the usual from compact pressed blocks, injection and extruded.

The first option is characterized by blurry geometric shapes. Tile defects become noticeable if several products are placed on edge. Installation using such tiles is best left to professionals who can make the difference in size almost imperceptible.

Injection foam tile is an expanded polystyrene product obtained by sintering. Products have correct form, same parameters, clear pattern. It is more pleasant and convenient to work with such a tile, in addition, it lasts longer than usual, which is explained stably high demand for products.

The most expensive is extruded or "laminated" tiles. Products are obtained by pressing strips of extruded dyed desired colors polystyrene foam.

The tile is initially selected in the desired shade, with patterns, imitating various surfaces, including marble, wood or granite. That is why, in this case, painting the ceiling tiles will not always be appropriate, and in the case of work, it will require compliance with certain rules.

Why paint a foam ceiling

Is it really necessary to paint the ceiling made of foam tiles, when even in white it looks neat and well-groomed? In fact, it is possible and necessary to paint the surface with this type of finish, with the exception of some cases when it comes to tiles with a laminated surface. Although such ceilings, after a few years, lose their hue saturation, requiring renewal.

Periodic and timely painting of ceiling tiles is necessary not only to improve decorative properties finishes. Properly selected coloring composition will protect the surface of products from moisture, extend the service life.

Without painting, the foam ceiling gets dirty faster and cannot be cleaned. Traces of exploitation will become especially noticeable on the ceiling tiles in the kitchen, where the surface of the products will eventually absorb not only odors, but also traces of grease, soot, etc. Meanwhile, it is enough just to whitewash the ceiling tiles in the kitchen, in the hall or in the corridor in order to to renew the surface and refresh the interior as a whole.

How to choose paint for ceiling decor

The right paint for ceiling tiles can be in three ways:

• water emulsion;
• acrylic;
• latex.

The easiest and cheapest way is to paint the ceiling tiles with water-based paint or acrylic compounds. Latex painting will cost more, while other paint options for polystyrene foam tiles are not considered in principle, as they can cause surface damage.

Water-based paint - tested practical option. The ceiling after treatment with the composition dries quickly and lasts longer. When choosing paint, you need to pay attention to the following points:

• density (the higher the indicator, the better);
• resistance to moisture (paint should not dissolve in liquid);
• resistance;
• low level of gloss;
• resistance to damage by microorganisms.

With regard to acrylic paint for painting expanded polystyrene tiles, it is worth noting the main advantages and disadvantages of the composition. The paint is easy to apply, sold in a wide range of colors, able to withstand aggressive environments and, most importantly, completely safe for humans. This means that you can paint the ceiling with acrylic compositions in bedrooms and children's rooms without fear of a pungent odor (it simply will not exist) or condensation (the composition has high vapor permeability).

Compared with water-based compositions, acrylic paint is not only more resistant to moisture, but also does not absorb dirt so intensively.

The disadvantage of acrylic paint is the higher price compared to water-based compositions, as well as not the longest service life.

Latex paint can be used to paint the ceiling when the issue of price is not a priority. Compositions of this type have a number of advantages, including a high drying rate, long-term preservation of color saturation, the ability to paint both dry and wet surfaces.

How to prepare the base of the ceiling for painting

Same as ceiling trim liquid wallpaper, painting styrofoam tiles will require some preparation. Start by leveling the surface. To do this, the joints between the tiles are puttied or treated with special acrylic sealant.

Pay special attention to the gaps between the ceiling tiles and the walls. They are also sealed with putty mixtures, the coating on the walls - wallpaper or tile is protected for the duration of the work with a wide masking tape.

If these are washable ceiling tiles, then before painting they must be cleaned of traces of use, thus preventing the appearance of stains after finishing. Hard-to-remove stains are intensively treated in several layers with primer mixtures. For priming, only water-based compositions are suitable without chemicals that can damage the surface of the film. The primer is applied not with a roller, but with a wide soft and fluffy brush.

You can also fight dark spots on the ceiling before painting with paint of the same color. As soon as the stains dry, proceed to painting the rest of the ceiling surface.

The principle of painting ceiling tiles

When the question of how to paint the polystyrene foam ceiling and what color is resolved, the surface is prepared, and the mixtures for painting are purchased, you can proceed to the process itself. To carry out the work you will need: two brushes - wide and thin, a roller and a sprayer, some use a sponge for painting.

The latter is an optional tool, more relevant for coloring tiles with smooth surface without relief and pattern. Surfaces with complex shapes and images can be carefully painted only with the help of brushes, both wide and thin.

To the question of whether it is possible to paint the foam plastic ceiling tiles in one layer, thus updating the coating with minimal costs, experts answer in the negative. Perfect option- painting not even in two, but in three layers. In this case, the paint consumption is higher, but this is the only way to achieve the creation of a rich, deep surface color with a uniform and uniform structure.

With regard to the choice of color for the ceiling of polystyrene tiles, you must observe simple rules. So, what color to paint the ceiling in the kitchen? It is better if it is a color on which traces of soot and dirt will not be so noticeable over time. In the hall, nursery, bedrooms, the ceiling is painted taking into account the features and colors interior, not forgetting the properties of colors to visually expand, narrow, lengthen the room.