Vase from the bottle with your own hands. Beautiful vases of plastic bottles of plastic bottles

At home, it is often unusual glass bottles from wine, which sorry to throw away, but not applications, and so plastic bottles from carbonated water different colors Always a great amount.

Instead of getting rid of them, you can turn them not only into a practical thing - a vessel for flowers, but also to create an interior decoration element.

Those who like to make their hands beautiful unique things and who knows how to do this from the girlfriend - a few ideas, like from a conventional bottle to make a vase.

Glass bottles for VAZ Hand Maid

Make a vase from a glass bottle is simple enough, you just need to know several techniques, and then - the expanse of fantasy and creative.

First of all, it is necessary to make the basis for the future vase - the bottle should be cut off the throat, then in the vase it will be possible to put a single flower, but a whole bouquet.

You can do this without tools - you need to take a thick woolen thread a length of 50 cm, a lighter or match, a wide vessel with water - so that a bottle can fit freely, any fuel liquidused in everyday life - acetone, gasoline, alcohol, stitching bar acute items or skirt.

For security reasons, protective glasses and household gloves will be needed.

Operating procedure:

• spend on the throat the bottle of the line where the pruning will be carried out;
• thread soak in a fuel liquid;
• wrap it with her neck on the intended line of three turns;
• establish a future vase on a horizontal surface, thread set fire;
• as soon as the thread burns, put the bottle in icewater - From the temperature difference, the bottle burst clearly at the place of heating.

Now it remains to polish the emery chips and proceed to creativity - the process of decorating a vase.

Decoupage technique

The essence lies in the surface of the surface with images on paper and fixes them with varnish. Paper napkins with different drawings usually go into business. This is done like this:

• degrease the glass solvent;
• cover the surface of the primer or acrylic paint - they can be white or the color of the napkin, which will be done by decoupage;
• after drying the paint, lubricate the place under decoupage with PVA glue;
• applied to plots, lubricated glue, carved from a napkin pattern;
• wide brush or sponge smooth the napkin from the center to the edges;
• paint the edges of the wipes paint, that everything looked neatly;
• take the details, decorate with rhinestones or beads;
• complete surface decoration by covering all two-three layers of colorless transparent varnish.

Decorating point painting

For this technique, you will need acrylic paint of different colors, a felt-tipper with a thin rod, a special outline on the glass - silver or golden, cotton sticks, art brushes.

The drawing can be chosen to your taste - a tree twig, flower, patterns. You can draw a cartoon character, fire-bird, portraying a rural landscape - a house and river.

The drawing is applied as:

• degrease the surface
• draw image sketch;
• transfer it from paper on a bottle using a felt-meter and circling the line loop to work on the glass;
• give the image to dry up, with a cotton wand remove the remaining traces of the marker;
• fill the image space with tassel points suitable color and different sizes.

For example, if it is a peacock, then the coloring process will look like this: to start filling the spaces of the contours of paint points from the body of the bird.

Then to paint the wings and feathers of the tail, leaving the center of them not painted.

In the center of each trigger pen, glisten a glass brilliant or pearl ball, you can lay out sequins and beads.

Decorating tapes

Satin or pearl vase is very beautiful, decoration is carried out by appropriate ribbons. This is done like this:

• apply PVA glue over the surface of the bottle with a meshe with thin lines or dots;
• tightly wrapping with ribbons with ribbons, not leaving on the surface of the lumen.

Tapes can be brought of different widths, It is possible with a pattern - one-photon pearl vase will also look beautiful, and with an ornament. In the same way, you can wrap a bottle with thick threads, twine.

With this technique, you can make unique vases with a textile surface.

You can wrap the bottle with ribbons with ribbons, horizontally or pigtail - all this will create a unique pattern thanks to the light that will play on satin fabric.

You can reorganize the textile vase by beads and bows.

Plastic Bottle Vases

Need usual bottles from soda. Basic master class:

• on a transparent colorless bottle, apply the top line and contour, where "Lace" will begin;
• cut off the outlined neck;
• vertically, cut the walls of the bottle on the strip down to the contour of the start "lace";
• bend strips outward;
• it takes each strip to the middle of the length and deploy in the wilts plane in such a way that it intersects with two, which are near, and ended up to the next one - so you need to go with each band, the neck of the vase will be lace.

In order for the vase to become colored - insert inside a colored paper sheet or a napkin with an ornament.

Openwork vase

We are necessary - a bottle of plastic, felt-tip pen, a conventional nail and a paint can (can be ordinary stained glass). Next come as follows:

• cut off the throat, outlaw the pattern with a marker pattern, which can consist not only of holes, but also from the drops - not to the nose itself, so that water can be pouring into the vase;
• heat the nail and pierce the bottle according to the drawing;

Billet paint paint from the sprayer or paint the stained one.

Outdoor vase

From plastic bottles from milk and glass cans An unusual outdoor vase of a height of about a meter will be released. You will need - 14 bottles, 3 l, paper napkins, toilet paper, glue and tape.

Manufacturing process:

• 12 bottles of episms pairly glue with scotch, 2 - to bore the same necks;
• install the bottles on the center bonded with necklaces, surround the remaining six pairs and glue everything with scotch;
• install the jar on the design and climb scotch.

Then make a frame of papier-mâché - to leave the design paper:

• first layer - napkins and whole PVA glue;
• the second is toilet paper with it, but diluted with water in proportion 1: 1;
• dry the product if irregularities turned out, fill them with napkins;
• adhesive gun to the adhesive gun, you can glue flowers, butterflies, any decor, or using a stencil, sponge and putty to apply a bulk pattern;
• within an hour-two give the design to dry;
• sanding patterns by sandpaper;
• pour the product from the spray with a spray gun.

Little vase

For its manufacture, you will need a bottle of 0.5 l, scissors, knife, glue either tape.

From the bottle to cut the throat, cut top Stripes, bend them to the bottom of the book and fasten to the base of the bottle with glue or scotch. Paint the vase, decorate beads, sequins or beads.

It is possible to decorate such vases and by gluing pasta of interesting shape, mankey, large salt, shells, small pebbles.

You can save a bottle of narrow tape with intricate patterns and paint out of the spray, then it is a tenth to remove - it turns out a fancy ornament from perfect smooth lines. The manufacture of VAZ from bottles can be interesting and useful to leisurely with children.

Stock Foto Vase from bottle

A vase from plastic bottles can be done very easily and quickly. Taking into account that if you are going to use paper or any other easily flossing materials to decorate, then you can only put dry flowers in such a vase.

And when making pots for flowers, do not forget to do small holes at the bottom so that the water is not stood.

Step-by-step lesson №1

You will need:
plastic bottle;
stationery knife;
marker.
1. Take a clean and dry plastic bottle and marker to make the desired height of the vase. Please note that the edge of the vase will be woven, so the mark should be arranged by about 7.5 - 8 cm above the desired level. With the stationery knife, cut the top of the bottle.

2. At the top edge of the bottle, make vertical cuts at the same distance from each other to a depth of 7.5 - 8 cm.

3. Carefully remove the resulting strips outward. So that the fold turned out to be smooth, turn the bottle and press it to the smooth surface (for example, to the table).


4. Now it is necessary to "brake" the edge of the vase. To do this, take one strip, remove it to the left and, skipping one strip, fill under the other two.

From plastic toys you can make a lot of diverse toys, such as penguin, boat, peacock and even a tree!
5. The next strip also move to the left, but this time skip two strips, and fill on the third.

Repeat until you put the edge, and all strips will not braid.


If you wish, you can paint the vase in any favorite color using acrylic paint or paint spray from the canister.

Master class number 2

You will need:
Plastic bottle of 2 liters volume;
grains of pea, beans or beans;
Stationery knife, ruler, marker, thermoclao gun and paint spray.
1. First do it cut the neck of the bottle at the desired height.
2. With the help of the marker, draw the vertical strips from the cut to the bottom of the bottle, placing them at the same distance from each other.
3. With the help of a thermoclaural pistol, glue the grains to the bottle surface, having them for previously drawn lines.
4. After that, paint the paint vase from the canister and leave to dry.

Vase number 3 do it yourself

You will need:
Empty plastic bottle;
colored paper;
glue stick;
scissors;
knife.
1. Wash and dry the plastic bottle thoroughly, then mark the desired height of the vase. Cut the neck.


2. Take the paper of the color that you would like to attach inner side Vases and navigit it into small pieces and glue them to the inner surface of the vase. Continue glue until you close the paper all the plastic surface.


3. Wipe the excess glue and fingers to scrape the seams so that the surface is more or less smooth.


4. Do the same from the outside of the vase, this time choosing a contrasting paper.


After the work is finished, cut the sticking extra edges of the paper.

Lesson number 4.

You will need:


2 plastic bottles;
scissors;
stationery knife;
Glue or Scotch (optional).
1. Wash the bottles, tear the labels and cut the necks.
2. With the help of a stationery knife, cut the bottles on the petals, as shown in the figure, and remove them out. Secure them in this position using a tape or glue.
3. Paint the pots and decorate them with decorative plastic flowers, beads, etc.


At the bottom of each pot, make small water holes.

First Association, which arises from us when we hear about vases from bottles - It is circumcised plastic containerin which, for the lack of real, temporarily can stand flowers at work or at home. But here are the examples that you see in our current article prove that items can be obtained to decorate any interior, which is not ashamed to put the most expensive bouquet.

Vase from bottle

Use to decorate interior vase from bottle - this is new fashion trend For all lovers home design. Moreover, the bottles are used transparent, glass, with a wide neck, which most often before the dairy products contained. This trend came to us together with fashion on environmentally friendly. clean materials and failure in the premium segment of food from plastic packaging. And after these glass bottles, it's just a pity just so throw out, because they can serve you true for many years.

A special chic is considered to be flower compositions With the help of containers of various volumes and shapes. So each flower looks individually, not similar to others. An example of this fashion clearance You can find in magazines dedicated to fashionable design, moreover, important to apply similar vaz from bottles, photo which you see above that there is no refinement to glass products in this case They are not required, exactly, as they have come down once from the conveyor, will become an integral part of the modern interior.

But if we are not talking about modern styleAnd, for example, if we are, it is much better to decorate a glass surface, giving it a new texture or color. After all, in those times of domination classic styles, in the interiors of the village houses of Provence, the glass was quite valuable material, in contrast to ceramics, and was used very rarely. Therefore, any transparent foundation must be brought to the perfect appearance, to decorate. For this can be used various methods, About parts of which we will talk. The most simple for beginner masters may be the application method, and this is used for it affordable Materiallike woolen threads or twine.

Work with glass when glue is used as a fastening material, should always include preparatory stage degreasing. This is done in order to improve grip with a slippery surface and make a layer of glue, and a layer of paint smaller, and the service life of such a coating longer. For degreasing, it is enough to wipe the glass by any liquid, which contains alcohol, starting with cologne or lacquer removal agent and finishing alcoholic beverages. After that, you should immediately begin the decorating process. In this case, for the task, how to make a vase from the bottleThe twine is applied. The tip it is glued at the bottom of the tank, then glue is applied for several centimeters to height over the entire surface and gently, with one layer, the string of the twine is wound. After that, apply glue again and wind up again decorative material. When you get to the top, the tip of the last row hide on the inner surface of the neck. By itself, the twine is not too attractive, so for additional decorations you can cover it with color paint, and you can apply it or with a brush, or ordinary kitchen sponge. With such vases will be obtained especially beautiful.

Vases from bottles do it yourself

Always look high vases from bottles do it yourselfwhich are painted by hand-paints, they cover patterns and ornaments. Not even professional artists can cope with such a job, especially if you pre-make a sketch and take strain.

Of course, not all sorts of paint can be used to solve the task. Ideal special stained glass dyes that can be bought not only in specialized stores paintworkBut in children's hobby centers, because the creation of stained glass windows on a glass surface is a very exciting view of the needlework. Those paints are distinguished by the fact that they perfectly dry out a glass surface, but their special types, so-called contours, are more dense, help to create boundaries, beyond which the paint does not flow, forming a smooth, beautiful layer. This technique helps in work not only with glass, but also with transparent plastic, creating bright.

However, you can greatly facilitate your task and pre-make one common color as a background, and already portray the simplest patterns on it, the work will still look skillfully and expensive. Cover the paint capacity can be both inside and outside, the first way is much easier, but in the second case you will receive a truly attractive appearance His craft.

The paint for decorating may be not only matte or glossy, you can also use unusual textures, such as the sequins. You can see the visual embodiment of such an idea in the photo, which is placed above. If you find initially paint with specified parameters You did not succeed, you can use sequins separately, spraying them on the painted surface until it has time to dry. At the same time, the sequins themselves should be pouring a sufficiently thick layer, generous grieving, so that all the glignies that can stick, do it. Nevertheless, the rest, which will remain on the pre-uncalate paper, you can collect and apply on a vase of another shade. So that the sequins are never sat down, you can cover the entire surface of the crafts with transparent varnish (often for such a goal even use hair lacquer), after which you can take it into hand without fear and install in the room. Bright, unusual items will be alone.

In addition to paint, there will also be beautifully colored stickers that covers a transparent bottle in several places, or closes completely. If expensive pocket stickers are not all, then you can buy tape with a pattern and use it as a main material for decorating glass or plastic products.

Vase from a bottle with your own hands

In addition, the glass surface can be coated with patterns or use applications, decoupage and other things, you can also experiment with the form, and not just with a touch of the surface. To do this, you need glass cutter and skill work with such a tool. the main objectivewhich is persecuted with such modification - to do in azu from the bottle do it yourself, about which at first glance and you can not say that it is done with the help of a healthy consumables. On the contrary, such crafts can get in one row with expensive design elements of the decor.

As an example of the work that we talked above, you can bring the following photos. In this case, when maintaining the overall height of the original product, it reformatted in such a way that there will be small flowers in size and ampel plants. However, due to the fact that the long neck is immersed in the lower half, you can put inwards as well as flowers middle size, the diameter of the stems of which will be quite thin.

And in the following example, which addresses the production of a vase from plastic bottles, we see how the same source form can be transformed by creating new, interesting combinations, with the ideas of these enough plastic set. Moreover, due to the fact that it is easier to work with plastic and safer than with glass, such ideas can be easily embodied in that or organize their own hanging gardens in the country.

Plastic Bottle Vase

Very elegant look like plastic Bottle Vaseswhich are made in the cutting technique. Patterns on their surface are obtained by volumetric, openwork, rather lace fabric than a banal plastic. The only drawback that this technique is not so easy, however, as any other when it comes to creating real artistic value. Therefore, on examples of such works, we can only admire, or, with a great desire, to master master classes on cutting, starting with those and to learn how to repeat similar masterpieces.

It is also good that there are ways to make a vase from plastic bottle with their own handsthat are much more affordable to understand even beginners. For example, as such a cute kitten, which you can repeat, taking the standard container from mineral water. Such a way to create crafts is generally common here, it is also first necessary to place the contours of the future figurines, cut it with a scissors or a thin knife, and then covered with background color and paint.

It looks like a technique for the creation and manufacture of such a small vase. It can be used not only for color storage, but also, for example, for fruits or candies. It is sufficiently simple - the plastic neck is cut off, and the remaining smooth walls are cut into thin vertical strips, not reaching the end on an exactly defined height. Then, with the help of scissors, each strip bends and decorated additional decor, either paper butterfliesAs in the example above, pebbles, shells.

Vases from plastic bottles with their own hands

Not even changing the form without cutting and not covering paint over the entire surface, you can make unusual and elegant vases from plastic bottles with their own hands. There is a simple reception there - even if you have a cheap and inexpressible base, you need to add to it interesting decorSo that in the end of the handwritten turned out to be attractive.

So in the first example, the circumcised exact container on the upper edge decorates the applique of shiny stones. Similarly, you can use plastic or clay flowers, lace, rhinestones. And in the second example, after decoration by plastic ribbons, nothing issues the origin of the elegant interior decor.

Glass and plastic bottles have a wide variety of shapes and dimensions, which makes them an excellent material for the manufacture of VAZ. Today Dekorin invites you to learn how to make vases from bottles with your own hands using breeds. You are waiting for 29 photos with step-by-step instructions!

Plastic bottle vase with your own hands

Plastic bottles are very flexible. They are easy to cut with a scissors or a stationery knife, so that the plastic bottle can have absolutely any form. Here are just a few ways to make it with your own hands:

• Cut on the surface beautiful patterns;
• Wrapped with strips of fabric, ribbons, cords;
• Paint an aerosol or ordinary paint;
• Decorate with branches, coffee beans and other natural and materials.

Ideas and step-by-step instructions for this you will find in the photo below:

Crafts on the table: Plastic Vases from bottles

Also read:

Outdoor vase with their own hands from plastic bottles

Also read:

How to make a glass bottle vase

Ways to decorate glass bottles from wine, beer and other drinks are no less diverse. Despite the fact that their form is much more difficult to change (maximum is to cut the neck), made by their own hands of a vase from glass bottles are much elegant and more interesting. Vases from high and narrow glass bottles are often used by "sets", placing 1-3 flower in each of them.

At the same time, homemade vases from cognac, etc. Long bottles can be jeacted by beads, seashells and act as an independent decorative element.

Unlike plastic containers, a glass bottle vase is usually painted from the inside. The paint is simply poured into the bottles, where it spreads freely through the walls. Thanks to this, the vases not only get a new color, but also preserve the glossy gloss of glass.

The exception is the painting process with an aerosol. It allows you to evenly apply paint to the surface of the glass, without the formation of smears. Use this option if you want to make matte vases from glass bottles with your own hands or give them the ombre effect.

Using stencils or hand-painted skills you can give a vase from a bottle of a beautiful pattern.

In addition to painting, you can also:

1. Wrap glass bottle thick thread or twine;
2. Decorate her ribbons, lace or cloth;
3. Apply decoupage.

In the following photos, you will see examples of such work.

How to make a vase from a bottle and pieces of fabric: examples with knitwear, lace and felt (the latter can be replaced with a felt).

On the last 3 photos in this article - vases from bottles made with decoupage. As we have already written in our article, before gluing the paper for decoupage, it is recommended to thinned with sandpaper or tweet in water.

Good luck to you in creativity!

Vases from bottles do it yourself - 29 photos with ideas for creativity Updated: December 26, 2016 by the author: Margarita Glushko

Nowadays, decorate your home very simple. You can easily buy in the store or order on the Internet any decor element. But the thing made with her own hands is able to delight with his beauty, and be a reason for pride. Plastic Vase - great way Give your home unique style.

Advantages of plastic products

Beautiful vessel with flowers will raise the mood in a rainy day. Often people can boast a home collection of vessels for flowers. They alternate them depending on the mood, the occasion for the celebration and simply picking up to the new wallpaper. If there are already several glass specimens in the bins, it's time to replenish the reserves with plastic products.

Pluses of homemade vases:

Vase from a bottle with your own hands

A wide selection of a vase production master classes will allow you to find an option that suits you not only for ease of creation, but also by the availability of materials. Follow step by step instructions And get amazing results!

Large instance on the floor

Create outdoor vase do it yourself from plastic bottles. It can be put on the floor in winter Garden, between armchairs in the living room, in the corner of the dining room, on the veranda. To work on such an accessory, there are not so many things.

Materials:

• plastic packaging desired size (from 2 to 5 liters);
• primer;
• paint in a cylinder intended for staining plastic surfaces (color to your choice);
• scissors.

Stages of creation:

Kashpo in the technique of decoupage

Decamental napkins can perfectly decorate a plastic vase. With their help, you can apply different drawings, give an exclusive decor. A similar vane of a plastic bottle makes it easy to do even in the company of children.

Necessary materials:

• napkins;
• glue and brush for it;
• scissors;
• test for decorating;
• hole puncher;
• gun for applying glue;
• napkins for decoupage.

Stages of work:

Plastic and thirty

This product is more suitable for the role of Kashpo. Here will be relevant to look dry or artificial flowers. Vase will be unusually bright decorative element. Consider how from a plastic bottle to make a vase, so that few people understand that it is self-made.

Materials:

• large (wide) bottle of plastic;
• knitting;
• scissors or stationery knife.

Step-by-step guide:

Treat the top edge is necessary in order to not cut about it and to save weaving (it can break free. To do this, wrap the end of the thread in the middle of the vason under the already applied layer of threads. Next, on the edges of large stitches, our tissue strip. Now Vaz is ready to decorate the interior of the house or apartment.

Vases with their own hands - this is a fairly simple and low-cost type of craft. The ability to create beautiful things from girlfriend, allows you to decorate your home at any time without spending money to buy expensive analogs in the store. Create new interior So often, as you wish!

ATTENTION, only today!