Diesel gas boiler universal kitura. Diesel boiler "Kiturami": specifications and reviews

In order to purchase and start using Kiturami diesel boilers, you do not need approvals and permits from authorized services. The only condition is to install this equipment in a separate room. The devices are capable of autonomous operation, and they can be controlled using the remote control. Each model is equipped with a remote control panel.

Diesel fuel Kiturami boilers are presented in several types. These include:

• Turbo- this series has a power level of up to 35 kilowatts. Despite the fact that the capacity is not too high, the equipment is equipped with a turbo-cyclone burner. Unlike other models, it has a low cost. As a rule, they find their application in small houses and cottages, with an area of ​​no more than 350 sq. meters.
• STS- have the same characteristics as boilers from the previous series, but at the same time differ in a body made of of stainless steel.
• KSO- are among the high-power devices (up to 465 kilowatts) operating on the basis of diesel fuel. These models are equipped with a turbocyclone burner and are designed for use in industrial facilities with an area of ​​up to 4650 sq. meters.
• Hi FIN- boilers from this series are made of high quality boiler steel with a modern, highly economical burner and a new type of Hi Fin heat exchanger. The power of this equipment ranges from 13-30 kW.

Note! All of the boilers listed above are equipped with an electronic control unit with many functions. The manufacturer also provided for the possibility of installing a room thermostat in order to control the temperature in the room.

Diesel boilers Kiturami (Kiturami) Is a high-quality, economical, highly efficient and functional equipment used for heating and hot water supply of residential and public buildings... Wide the lineup Korean-made boilers, attractive design and affordable price determine their popularity among consumers.

Technical features and series of Kituarmi boilers

Kiturami STS - floor standing diesel boilers for heating, can operate on kerosene, light oil products and mining. The minimum fuel consumption and high performance are achieved thanks to the presence of a turbocyclone burner. If necessary, the burner can be replaced with a gas burner.

Kiturami KSOG are two-circuit liquid fuel boilers that can also run on gas. Equipment management does not require special knowledge and skills. The automatic block copes with this task perfectly. Models of the series are equipped with an electronic control panel, which makes the control process more comfortable.

Kiturami Turbo - boilers designed for space heating and hot water production. Since these are not single-circuit boilers, but boiler-type models, there is no need to purchase additional equipment. Equipped with a thermostat, control panel, a set of sensors and a system for forced removal of combustion products. They have an increased level of protection.

Diesel boilers from Kiturami:

• provide low fuel consumption and at the same time high heat transfer;
• made of high-alloy steel, which significantly increases the service life;
• completely safe to operate.

Hot water boilers on liquid fuel - enough sophisticated equipment... Do not install and adjust it yourself. We recommend entrusting the installation and connection of the unit to our specialists, who will perform the work quickly and efficiently.

Online store "ITs Teplomatika" always high quality

Even at the design stage of heating in the house, you have to operate with the generalized technical characteristics of the boiler, but in the end you still need to go to the store and choose a very specific model from huge assortment on the market.

It will be useful to find out in more detail what a Kiturami diesel boiler is, what models are in the line, and how they can be better than other offers on the market.

Features of Kiturami boilers

Kiturami is a South Korean company with more than half a century of experience in the design and manufacture of heating boilers and related equipment.

During this time, the company has become one of the leaders in the domestic Korean market, and also found an extensive sales market in North America and neighboring countries of Asia. In our country, Kiturami boilers have been officially distributed for at least ten years and have already shown themselves on the good side.

The main emphasis in the promotion of boilers is on the introduction innovative technologies and, in particular, our own developments that have no analogues from other manufacturers or determine the narrow specifics of the equipment operation.

Diesel boilers, by definition, are not considered as a basic model range for a wide range of applications. In terms of economic feasibility, they are inferior to gas, electric and even solid-state boilers. However, they are still in demand among consumers in view of a number of reasons why liquid fuels are becoming preferable.

In remote areas of residence, where there is no stable connection to power grids, no gasification, the issue of fuel availability is acute. At the same time, the heating of the house should, by definition, work without interruption throughout the season. If for many countries such situations are rather an exception to the rule, then for us, on the contrary, it is routine, the cause of which is the vast expanses separating settlements.

Diesel fuel, unlike gas, is easier to transport and easier to store with minimal risks to life and the environment... Unlike solid fuel boilers, diesel fuel during combustion gives uniform heating and a greater degree of control over the waste of resources. And finally, the design of the diesel boiler and in particular the burner does not limit the use of other heat sources.

With minimal changes, the diesel burner can be replaced for the use of blue fuel, and boilers equipped with an extensive combustion chamber and grate, can quickly switch to using coal, wood or pellets.

Diesel boilers Kiturami are highly technological and perfectly balanced equipment for using diesel fuel as a heat source, and at the same time, they are excellent for the listed types of conversions to work with gas or solid fuel. Thus, constructive and functional flexibility is the first significant advantage.

Kiturami boilers often use their own designs and unique layout. On the one hand, this reduces maintainability. heating equipment, but on the other hand, it provides the highest boiler efficiency and balanced operation, while observing simple and transparent operating rules. This is the second good reason to turn your attention to diesel boilers from South Korea.

The final advantage is the cost of the boiler equipment. Even taking into account the high performance and proven quality of the boilers, their cost does not exceed the market average among similar offers.

So it turns out that Kiturami boilers have three features: a balanced design, high efficiency and an affordable price.

Specifications

The operational characteristics, dimensions and parameters of the Turbo series boilers are presented in the table below. It is clearly seen that the series of floor-standing diesel boilers covers a power range from 10 to 35 kW, which is quite enough for heating houses up to 250-275 square meters. Part of the heat will be spent on preparing hot water, which must be taken into account in the calculations.

All Kuturami boilers are double-circuit and heat exchangers, by the way, are ideally designed specifically for these tasks.

Fuel consumption

Fuel consumption is indicated in the table with technical requirements... However, remember that the actual flow rate depends on the individual settings. For the actual power required for heating the house, an appropriate nozzle is selected from the set proposed by the manufacturer.

Given by thermal power, fuel consumption and fuel combustion mode. The parameter indicated in the table reflects the factory presets, sufficient to ensure proper performance, provided that only high-quality fuel is used, more often it means diesel fuel already with winter additives that prevent it from thickening, or paraffin release in excess of the norm.

In a real situation, for a boiler model with a capacity of up to 15 kW, you can expect fuel consumption at the level of 8 liters per day taking into account the frequency of operation of the burner and the optimal temperature regime in the house. However, this is not the limit.

The correct approach to the choice of heating mode, as well as the installation of a controller with variable temperature regime, for example, depending on the time of day and day of the week, can reduce consumption even more.

Chimney

Kuturami boilers, gas, diesel, floor-standing or wall-mounted, are mostly equipped with a closed combustion chamber and, accordingly, a forced exhaust system. The Turbo series, which we are in this moment we are considering.

The chimney for boilers is used coaxial for simultaneous supply fresh air from the street and discharge of exhaust gases. Since the exhaust temperature after passing through the heat exchangers is no longer high, the requirements for the heat resistance of the chimney are reduced, and the list of acceptable materials is expanded.

In the best case, a steel coaxial chimney is still used, however, a ceramic vertical chimney with a group of internal separate channels for supplying air, removing gases from the combustion chamber and ventilation of the boiler room can be effectively used in the same capacity.

The chimney size is strictly specified in the boiler specification and operating instructions. For the entire Turbo series, this is 80 mm.

It is possible, if desired, to make a chimney with a slightly larger diameter, but not more than 50% above the specified value, that is, up to 120 mm.

In no case should you reduce the size and section. Even though the removal of combustion products is forced, the resistance of the chimney will greatly affect the combustion mode and the quality of fuel combustion.

turbo 13r

The model number of the boiler corresponds to the amount of heat generated per hour - 13000 kcal / hour. In terms of the usual kilowatts, the value is 15.1 kW.

The declared capacity is sufficient to heat a house with an area of ​​up to 150 m2. Naturally, one should take into account the heat consumption for the preparation of hot water supply. If a significant consumption of hot water is predicted, moreover, regularly, then the heat output for the heating circuit will naturally be lower.

Reliability and balanced operation, combined with the affordable cost of the boiler, gives a clear advantage in the case of using several boilers at the same time in one building, for example, when dividing the heating circuit for each floor separately or when covering a large area in two more wings, directions.

turbo 17

The thermal power already reaches 19.8 kW, which is enough to cover the heating of a house with an area of ​​up to 180 m2. It is possible to reasonably increase the upper performance threshold by selecting the appropriate nozzle on the burner, however, this will affect fuel consumption.

This approach allows you to solve the problem of increased DHW consumption so that you do not embarrass yourself in using hot water without extra costs even in the most severe frosts.

turbo 21r

WITH further enhancing power, there is a model with a declared capacity of 24.4 kW, along with this, the productivity of the DHW circuit significantly increases. It should be noted that the dimensions of the boiler do not change in comparison with the younger models.

turbo 30 r

The most powerful model in the Kiturami range of oil boilers. Productivity at the level of 34.9 kW makes it possible to heat a room up to 350 m2, but at the same time the cost of the boiler in retail is approximately 45-46 thousand rubles., which is undoubtedly an attractive option.

As in the entire range of boilers, burners with a unique torch shape and optimal fuel combustion are used.

The minimum amount of nitrogen oxides is registered in the exhaust, which indicates the high environmental friendliness of the equipment.

Customization

It is better to entrust the initial start-up and adjustment of Kiturami boilers to a specialist who can correctly determine the optimal operating mode, select required type injectors and adjust the fuel consumption depending on its characteristics and even the method of connection and location of the fuel tank.

For self installation included with the boiler detailed instructions, according to which it is possible to determine the operating mode closest to the design value.

The main thing is to adhere to the sequence of actions defined in technical documentation and a visual aid for putting the equipment into operation.

It is necessary to adjust and adjust the boiler settings not only at the first start, but also during maintenance before each new season and to switch to summer mode, in which only the DHW circuit will be used.

Malfunctions

Kuturami boiler equipment is equipped with a complete self-diagnosis system based on the operation of a number of sensors. The controller is able to assess the condition of the equipment as well as the current mode of operation and respond to any deviations or problems that arise during operation.

In any emergency situation, the main action assigned to the boiler controller is to shutdown the burner to prevent significant consequences.

A well-developed self-diagnosis algorithm allows you to identify the problem and indicate the error code on the display so that the user can take all the necessary actions to repair and restore performance as quickly as possible.

In list frequent breakdowns diesel boilers Kiturami:

• No ignition (error code 01);
• Does not start, there are no messages on the display .;
• Coolant leakage (depressurization of the heat exchanger or one of the pipeline connections);
• The flame periodically goes out with an emergency stop of the boiler;
• There is no draft, the operation of the boiler is accompanied by the ingress of smoke and exhaust into the room.

Error 01 and solution

If error code 01 appears on the boiler display screen, it means that the fuel for some reason did not ignite, there is no flame, the controller forcibly stops the fuel supply, issues an error message, signals the problem to the user.

Solving the problem requires an accurate implementation of the order of actions that can identify the source of the problem and eliminate the obstacle in the operation of the boiler as efficiently as possible.

V short form the procedure looks like this:

Quite often, the fuel-air mixture is supplied under too much pressure into the chamber and therefore does not have time to ignite from the electrode. The problem is solved even at the 5th step of the algorithm by adjusting the air damper, which causes a mixture with a changed concentration to enter the chamber.

Doesn't start

The most unpleasant situation is when the boiler simply does not turn on. There are no signals on the display, and accordingly there is no error code by which the malfunction could be determined.

In such a situation, it would be adequate to call a specialist service center, who will be able to understand the situation and issue the correct verdict, as well as determine the repair procedure. On your own, you can only check the presence of voltage in the network, as well as the fuses in the boiler.

Leakage

Most often, a leak means that the gasket seal has been damaged at some pipe connection inside the boiler. It is enough to inspect the equipment and determine the place of leakage, replace the gasket.

The heat exchanger in Kiturami boilers is made of alloy steel and copper, so it does not leak without obvious errors in the selection of the coolant or mechanical damage.

The burner goes out periodically

Most common reason is a malfunction in the burner setting. It is important to adjust its power and use a gas analyzer to determine the optimal air / fuel ratio for proper combustion. Such work cannot be performed on your own, so it is better to contact the service center.

No draft, smoke and exhaust enters the room

Most likely the burner fan is not working for some reason. It is important first of all to check that the impeller is intact and rotates normally.

It is possible that debris has accumulated inside the fan, or the impeller shaft is jammed. Next, the electrical part and the control unit are checked.

4 March 2014 Alexey

No matter how the manufacturers of gas heating devices have improved their equipment, the ever-increasing prices for this type of fuel and its inaccessibility for many settlements countries are forcing many to choose alternatives.

And one of them is Kiturami diesel boilers. They appeared on the market for a long time, but they have not lost their relevance.

Kiturami is today already a concern, which is considered one of the main manufacturers of heating equipment in South Korea... The history of the company's development goes back over 50 years. It all started with small production, which gradually grew into a large concern.

This allows us to constantly improve our products and guarantees their highest quality.

We get acquainted with the products of heating equipment:

Diesel boilers of the Kiturami company have been repeatedly awarded various diplomas and awards for technical perfection and reliability. It has international certificates and is supplied to many countries around the world.

Product range

As a leader in the production of heating equipment, the concern is constantly developing new models of it.

Today, its product line includes boilers:

• Diesel
• Gas
• Bi-fuel

The range of diesel vehicles is represented by the Turbo and KSO brands. All diesel boilers manufactured by Kiturami have positive reviews... The first series is models for household use. Their classification indicates the heating capacity and hot water... For example, a Kiturami Turbo-13R diesel boiler produces up to 13,000 Kcal of heat per hour.

The KSO series is structurally similar to gas appliances. However, after replacing the burner and electronic equipment, they are able to operate on a different type of fuel. In these models, a turbocyclone burner was used, which made it possible to achieve high efficiency and almost complete combustion of the fuel. Diesel boilers Kiturami have simple design, which makes them easy to operate and maintain, and low price only increases the already not small demand.

Watching a video about the KRM-30R model:

But the most interesting decision among the products of this company is bi-fuel. They are ideal for work in areas with unstable power supplies, as they can work in addition to liquid fuel and solid fuel. Moreover, when coal or firewood is burned, the boiler automatically switches to diesel combustion. The Kiturami diesel boiler is equipped with a forced circulation system, which made it possible to achieve maximum efficiency indicators. Such devices are presented in two models:

• KRM-30R

They differ in power.

Advantages and disadvantages of diesel boilers

What are the products of the South Korean manufacturer - it is high quality, modern design, functionality and reasonable price. Among the most popular models, it is worth considering Kiturami STS diesel heating boilers. Their capacity is sufficient to heat rooms up to 190 m².

Kerosene or light oil product can be used as fuel. It is also allowed to switch to gas when changing the burner.

The advantages of the model also include the equipment of the device with safety sensors that allow you to monitor all important processes. During their development, a unique technology for the removal of combustion products was applied.

The Turbo series includes floor-standing diesel heating boilers, capable of not only heating a room, but also heating water for domestic needs. To do this, you do not need to buy additional equipment, since this device belongs to the boiler-type models.

The pluses should also include high level protection, which is achieved by the presence of:

• Sensors
• Built-in thermostat
• Control panel
• Forced exhaust gas discharge

The advantages of all Kiturami equipment include the possibility of its functioning under any conditions, which is very important for the domestic consumer. It is also very easy to buy spare parts for the Kiturami diesel boiler, since the company has a large number of dealer firms.

Diesel boilers brand Kiturami have a number of advantages over similar devices from other manufacturers. They are among the most. Therewith, the average productivity of the device is 20 liters of hot water per minute.

But their biggest advantage is their relatively low price. You can buy a diesel boiler from the Kiturami company for 20 - 29 thousand rubles. In addition, diesel equipment is presented quite wide model range, which allows us to meet the needs of not only the owners of private houses, but also industrial facilities.

Installation and maintenance of oil boilers

The characteristics of diesel boilers of the Kiturami brand are excellent, which have proven themselves well on the market, but do not forget that when handling them, a number of measures are required, otherwise even the most reliable equipment can be brought to total repair.

The first thing everyone who has to deal with the equipment of the heating system in their own house has to face is the installation of the boiler. It must be performed in accordance with all the rules and it will be better if such work is carried out by specialists.

And then you don't have to do Kiturami right after installation. Indeed, most often the reason for the rapid failure of equipment is precisely its incorrect installation. In this case, reviews appear on the Kiturami diesel boiler, telling about breakdowns.

Since the diesel boiler is equipped with a fuel tank, it also requires certain operating conditions. Firstly, only pure diesel fuel can be poured into it, and secondly, just like the heating device, it requires regular cleaning. When purchasing equipment, you must immediately pay attention to whether there is a pipe for draining sediment in the tank, as well as a fix package.

Before turning on the boiler, fuel is poured into it and allowed to settle for 20 minutes, and only then the Kiturami diesel boiler is adjusted. If in your area there are frequent power surges in the network, then you should not refuse to purchase a voltage stabilizer, which will help keep the control unit and sensors of the device working.

However, it is not enough to properly install and operate the equipment. It requires regular maintenance work.

They include:

• Mechanical cleaning
• Checking elements for operability and absence of leaks

Some of the listed works can be carried out independently, for example, but nevertheless, it is better to entrust the main part of them to specialists. And do not forget that the need to care for heating equipment must be constantly remembered and all work must be done in a timely manner. This approach will allow you to avoid many minor problems and prevent major breakdowns.

What are consumers saying?

South Korean products are increasingly in demand in the domestic market, and this is not by chance. That is noted by everyone who already has diesel boilers Kiturami, reviews of the owners say that the main advantage of diesel equipment is its special design.

Modern samples of heat exchangers are made of high-alloy steel, which significantly surpasses its counterparts in terms of durability. The copper circuit of the boiler allows it to interact well with water or antifreeze. Due to this feature, the device has increased thermal conductivity.

Diesel boilers kKiturami heating have positive reviews, they indicate the presence of electronic system with internal and external consoles, which simplifies the boiler control process and allows you to monitor its operation from anywhere in the boiler room.

What can be said in the conclusion?

A large number of brands and types of heating equipment makes it difficult to make the right choice. Therefore, the question is often asked - what should be considered when buying? Among the liquid fuel models, there are single and double-circuit devices, they also differ in power.

It is these parameters that should be put at the forefront. Since in private households, the heating load most often exceeds the need for hot water, it is possible to install single-circuit Kiturami diesel boilers, spare parts and a boiler for them will have to be purchased separately.

With regard to the efficiency of the heating system. It depends on the accuracy of the calculation, which means it is worth considering the size of the room and other features.

When buying a boiler, you need to ask about the depth of the intake of diesel fuel, it corresponds to the largest possible depth to which the tank can be buried.

And, of course, you need to count your financial expenses, taking into account not only the cost of the device, but also additional equipment, installation and service.

The manufacturer "Kiturami" differs in that it can be used to equip the heating system and use hot water in industrial and residential premises.

Range

Today the company manufactures exclusively double-circuit boilers, the power of which can vary from 9 to 35 kW. The equipment is functioning and is optimal solution for and heating. Heat exchangers are made of high-alloy steel, which surpasses other types of similar devices in terms of performance and quality. Antifreeze or water can be used in the heat exchanger, it is 99% made of copper, which provides an increased productivity of hot water preparation.

Reviews of diesel equipment manufacturer "Kiturami"

The diesel boiler "Kiturami", according to buyers, has excellent characteristics, among them:

• profitability;
• reliability;
• security;
• the presence of a self-diagnosis system;
• ease of use;
• the possibility of using a different type of fuel;
• hot water supply;
• the ability to use hot water.

As for the first characteristic, the diesel boiler is considered one of the most economical among the models on Russian market... Today, it is quite difficult to find such equipment that would consume only 8 liters of fuel per day. The presence of a turbocyclone burner allows achieving the highest efficiency in terms of fuel consumption due to the aerodynamic flow in the combustion zone. Consumers especially emphasize that such devices are reliable and safe, because the manufacturer has equipped them with overheating and temperature control sensors, as well as a control system that monitors the presence of a coolant in the system.

If you purchase a Kiturami diesel boiler, you can use the self-diagnosis function. The device has an interactive display, which displays information about the operation of the unit. It is impossible not to mention also the thermostat, which shows the state of the system. Among other things, all control functions can be set from the remote control, which can be installed anywhere you wish.

About thermoregulation

The built-in thermostat allows you to regulate the operation of the equipment according to the temperature of the coolant. According to buyers, the boilers provide for the possibility of temperature control by degrees in the range from 41 to 75 °. If there is a need to switch to another type of fuel, then you can replace the burner.

Technical characteristics of boilers of the Kiturami Turbo series

The diesel boiler "Kiturami Turbo" is presented for sale in several varieties, they have different power indicators and are capable of heating rooms of a certain area. The boilers also differ in the average fuel consumption, as well as the performance and capacity of the heat exchanger. Diesel boiler "Kiturami", reviews of which will allow you to make right choice, may refer to the Turbo series. The most powerful equipment of this line is the model in which the mentioned parameter reaches 35 kW, this applies to the Kiturami Turbo-30R. But if you need the minimum power, then it is best to choose the Kiturami Turbo-13R, for this model the mentioned characteristic is 15 kW.

The average power is typical of the Kiturami Turbo-17R, in this case it is 19.8 kW. The heated area of ​​these boilers is different. If we are talking about the smallest power, then the area should not exceed 150 m 2, while for the Kiturami Turbo-17R model this parameter is 200 m 2 or less. The efficiency fluctuates around the same level and averages 93%. We must not forget also that boilers of different power consume fuel in a certain amount. If you choose the Kiturami Turbo-21R model, about 8 liters of diesel fuel will be consumed per day.

Reviews of the Kiturami KSOG series

Diesel boiler "Kiturami" can also belong to the KSOG series. In this case, we are talking about high-strength devices that are capable of delivering 465 kW. This equipment is also double-circuit and consumes diesel fuel during operation. According to buyers, the boilers have a built-in turbocyclone burner, and they can be used in industrial facilities. This is true, because the heated area reaches 4650 m2.

Users love the presence of a self-diagnosis device as well as special heat transfer pipes. The heat exchanger is made of stainless steel, and a steel frame is used for transportation and installation, which, according to buyers, is very convenient. By purchasing such equipment, you can use the electronic control unit, which has many functions. The manufacturer has provided for the possibility of installing a room regulator. That is why the Kiturami diesel boiler can be controlled without leaving the premises.