Bottles decor do it yourself: inspirational ideas and phased master classes. Decorative bottle "Sea memories decorate a bottle of marine style

If you went to relax on the sea, you probably could not be held and brought with you part - shells, pebbles, slices of corals.

Use all this wealth for the decoration of the bottle in sea styledescribed in our master class. Cost of crafts - a penny, and pleasure - the sea! Souvenir will continue to retain decorativeness, decorating the house, gladly and resembling a wonderful vacation. Make this beauty in the coming days or save the reference to the future, there are still no opportunity to do needlework.

Preparation for needlework

For the design of the bottle in the marine style with their own hands, prepare materials and tools:

• shells, sea stones, corals (all this can be bought in stores for needlewomen);
• glass bottle;
• sand;
• halves beads under pearls;
• metal pendants of marine themes;
• two or three corks from champagne;
• jute twine of different thickness;
• natural or synthetic white mesh;
• stationery knife;
• scissors;
• lacquer remover;
• cotton or rag;
• transparent universal glue "Dragon";
• adhesive gun with a transparent rod;
• tassels.

Not only the cheapest, but also environmentally friendly! They can be done with children. We recommend immediately design using the photo.

Step-by-step equipment

For decor in the marine style perfectly suitable bottle light of blue color. If you have a packaging from transparent glass, For decoration, use the grid of green. Remove all labels. To do this, you can simply be an empty ass in water. The remnants of glue on the glass thoroughly remove the cotton swab into the lacquer removal facility. Well dry the outer side.


Make a "sandy bottom" in the seafrock. Buy sand in the store for animals or ask taken from the sandbox. Apply universal glue at the bottom of the lifting lines. Waving his tassel to the bottom line.


Deliver the bottle in a bowl with sand glue. If necessary, pour it on a bottle with a spoon to fall asleep to them all the cursed surface.


When everything is driving, smooth the silent tassel.


In the deepening of the sand bottom to hot transparent glue, attach the first flat shell. To make a bottle, laid in the sea, laid on the side, did not spin, put a spoon under it.


From the synthetic grid, cut off the line diagonal of the square band with a width of 10-13 centimeters. Long edges smell. Fit one of the short sides, you can even fix the thread, and glue it to the bottom line. For fixing now and then use the adhesive gun.


Scissors cut the mesh along the bottom line and attach over a few more sea Rakusheys and slices of corals.


Add some beads under pearls. Adhesion directly on the decor elements.


Make a print media. Stationery knife Cut the bases of one of the traffic jams.


Apply to the plug circles "Dragon". Put between two circles folded twice the thin jute rope and lock up to dry. Attach metal suspensions to the same rope.


Tighten the grid to the neck. Apply over the glue and wrap the neck of the thick jute rope, after pre-fixing the cortical printing and metal suspension from the sides you need.

FROM opposite side With the help of a glue gun, create a composition of seashells.


Pick the base of the cork to the neck diameter with the help of the stationery knife. Close the cork.


Beautiful bottle An decoration in the marine style can be put on the shelf for the decor of the bathroom, bedroom, living room or use as a practical vessel for light drinks.

Such a souvenir is ideal for a gift. In order not to spend holidays on the presents to friends, make them yourself! See how else it is possible. For registration suitable different materials - leather, thread, salt dough and even unnecessary tights!

Take a look in our to find for yourself classes for the next year! Be with us in social networksTo first learn about the release of new publications.

Save shells as a reminder of carefree days on the beach is best in the form of interior items, jewelry and souvenirs. After all, they are so beautiful, completely free, natural and durable material. In this material you will find 50 inspirational photos, 8 ideas and as many step-by-step master classes for making crawl crafts with your own hands for beginners.

Basic Instructions for Preparing Shells

Cleaning

Before starting to make crawl crafts, they need to prepare carefully.

• If the shells are "dead" and the remains of mollusks in them left, they need to simply soak in a solution of water and any chlorine-containing agent (H-P, with a bleach, "duckling", etc.) in proportion 1: 1 for 30 minutes. If the shells are very dirty, or you want to remove a dark outer layer ( periostrakum), then soak them longer. After soaking, clean the shells with a brush and rinse in clean water.
• If the seashells are "lively", that is, they have the remains of mollusks (even if they have long killed) and have nasty smell, they need to be carefully cleaned. To do this, lower the shells into boiling water for 5 minutes, and then remove the remains of mollusks using forceps, manicure scissors, etc. There is a second way: heal the shells in the microwave for 30 seconds, then try to remove the remains to the tongs. In case of failure, continue to heat the sinks in the microwave oven, checking the result every 10 seconds. When all the remains are removed, process the sinks with a chlorine-containing means according to the first instruction.

After processing, inspect the sinks onto the subject of chips and, if any, paste their grinding bar, disc or emery paper. If you wish, you can give them shine using a clear nail polish or furniture, as well as with oil or fatty cream. True, in this case, before treating seashells with glue, the places of gluing will have to additionally degrease the alcohol.

Drilling holes

To make some kinds of crawls (Nr, wind music, beads, bracelet and other decorations), you need to drill a hole. This task is quite simple, the complexity consists only that shells can crack or smell in a drilling site.

• Therefore, remember the main rule: the thinner of the sink, the smaller it should be a hole and, accordingly, the thread / fittings of the decoration.

There are two ways to make holes in the shells - manual and automated.

Method 1. Pick up the drill for a drill, screwdriver or direct grinding machine diameter 0.8 - 2 mm. Put the shell on a wooden or plastic board And glue it with painting scotch. Drill the hole right in Scotch - it will not give a shell to split or burst.

Method 2. If you do not have a screwdriver or drill, then you can make a hole in the sink with a carnation and a hammer. To do this, first cross the shell with a paint tape, put a label on the inside of the sewer, then depitted a carnation and gently knock on it with a hammer several times to make the initial hole. Next, expand the hole, moving inside it the same nail back and forth until you reach the desired diameter.

If there was no nail or a hammer at hand, then use an ordinary needle, manicure scissors or knife and "drill" manually hole. The result will appear in about 10 minutes.

Idea 1. Inlaid frames, frames and frames

We can arrange the mirror frame, paintings or photo frames. Examples of such crafts present in the following selection (leaf photos to the right).

Today we suggest you to issue a frame for the mirror with seashells, but on the same principle you can decorate any photo frame or frame frame.

Materials:

• Shells of small, medium and large size and, if desired, additional decorations (Nr., starfish, pearls, skating figures, etc.).
• Glue-gun and a few glue sticks or transparent epoxy glue.
• Newspaper or any unnecessary paper to protect the mirror from glue.
• Malar or ordinary tape.

Instruction:

Step 1. Protect the mirror with paper, securing it with painting scotch. At this stage, the frame can be painted if its initial look does not suit you.

Step 2. Sore seashells in size to facilitate the creation of a future composition.

Step 3. First, cover the first row of small or medium seashells (about the same size) around the mirror.

Step 4. Now start gluing the largest shells. Previously you can play with the layout options and choose the best. If you use epoxy glue, then after all the details are glued, leave the frame to dry overnight.

Idea 2. Mastery Panel Valentine

From the collection of Rakushki. different shapes and sizes you can make a panel in valentine. However, you can cut out of cardboard / plywood any other shape, say, the same sea skate or letter.

Materials:

• Glue-gun or any adhesion glue;
• Collection of river and marine seashells;
• Cardboard;
• Scissors;
• Twine.

Instruction:

Step 1. Cut from the cardboard the basis for the heart shaped panel.

Step 2. Do two holes for twine with a knife or seer.

Step 3. Start gluing the seashells, trying to leave the minimum spaces between them. Hole holes Leave open.

Step 4. Cut the twine of the desired length, thread the two end of the rope into the holes from the inside of the panel and tie to double nodules.

In the next video, you can see a visual master class on making craft from shells with your own hands in the form of Panel Valentine.

Below are other ideas for creating a panel of seashells.

Idea 3. "Write" picture on canvas

And here is another idea of \u200b\u200bcreating a wall craft from shells.

Materials:

• Canvas on the subframe;
• Shells;
• Glue-gun or other adhesive adhesion glue, Nr, "moment";
• The template or stencil of the desired pattern printed on paper;
• Acrylic paint to create a background (optional);
• Brush (optional).

Instruction:

1. If you want to repeat the idea of \u200b\u200bthe picture of this master class, then first create a background for the composition of seashells. To do this, use the brush and acrylic paint of the desired color. Wait until the background is dry, and proceed to the next stage.
2. Fix the template or stencil on the canvas using a painting tape, and then circle its contour with a pencil.
3. Start gluing the seashells on the drawing, without going beyond its borders.

Idea 4. Cook candles for mini candlesticks

Shells are almost ready-made miniature candlesticks, which are just waiting to be added to paraffin and phytylene. The resulting candles you can use for a romantic picnic or just to decorate the interior.

Materials:

1. Sea or large river shells;
2. Little round candles in tin molds;
3. Water and saucepan for water bath;
4. PVA glue or double-sided tape.

Instruction:

Step 1. Remove the candle from the tin tank, and then remove the wick from it, pulling the metal base at the bottom of the candle (see photo). Put it off the fittil, and return the candles themselves in the molds.

Step 2. Each wick stick to double-sided tape or PVA glue in the center of the shell.

Step 3. Now we need to melt the paraffin to a completely liquid state. This can be done in three ways:

1. Bring the water in a saucepan to a boil, then loosen the fire so that the water ceases to boil, and lower the molded into it.
2. Put candles on the slab heated on the minimum fire, and make sure that the paraffin is not burned.
3. Preheat paraffin with a hair dryer.

Step 4. As soon as the paraffin is mounted, remove the molds from the fire and proceed to filling the seashells. It is best to use any nippers for this or a couple of Chinese sticks. Do not forget to pre-protect the surface of the table with a newspaper.

• If the shells are too unstable, and you are afraid that paraffin will freeze unevenly, it is better to decompose the candles on packing cells for eggs or fix, for example, a soft plasticine that does not leave traces.

After about 20 minutes, the paraffin will completely freeze, and you can enjoy the light of the candles from seashells.

Idea 5. Make a marine Topiary

Topiary is a small decoration in the form of a tree in a pot. You can find out the principles of making topiary from seashells with your own hands or from the next video lesson.

And in this selection of photos you can learn the ideas of the design of Topiaria from seashells with your own hands traditional round shape Or in the form of a New Year tree.

Idea 6. Mastery Candlestick-Flower

If you have a sufficient number of seashells of bivalve mollusks, then you can make them in the form of colors.

Today we offer to make such a crawler from the people of mussels.

Materials:

• Seashells of double mollusks;
• Any round base of a small diameter;
• Glue gun;
• PVA glue (not necessarily);
• Shine (not required).

Instruction:

Step 1. Prepare shells - wash them with soap, remove the remains of the organicists and, if you wish, whiten them with chlorine-containing means (see the instruction at the beginning of the article).

Step 2. Paint the round base of the candlestick into any neutral color, for example, white.

Step 3. While the base dries, sort your rinse set in size.

Step 4. Start gluing 1 row of sinks on the sides of the base on thermo glue.

Step 5. When the first row serves a bit, proceed to the creation of a second row, placing every new brain shell with the previous one and so that it is between the two shells of the first row. As a result, you will have a layout of the shells of two rows in chess order As shown in the photo.

Step 6. The third and all subsequent rows are attached along the same principle, but no longer based on the joints of the previous row (the place is highlighted by an arrow in the photo below).

Step 7. When you stick the last row, inspect the candlestick and add one more or two rows where, as you think it is necessary.

Step 8. Hooray, a candlestick from seashells is ready! If you wish, you can additionally decorate it with sparkles. For this you need to make the following actions:

• Treat the shells with plow glue inside or only around the edges.
• Generously sprinkle on the sink of sequins, let the glue dry, and then shake the excess.

Idea 7. Create wind music

Shells are the perfect material for the manufacture of wind music, because the "chime" of such marine bells is very pleasant on his rumor.

Materials:

• Twine, fishing line or any thread.
• Twig or wooden stick.
• Scissors.
• Hot glue pistol or tool for drilling small holes (drill with a 2 mm drill or just a needle and manicure scissors).
• Shells.

Instruction:

Step 1. If you want seashells to be tied to threads, then first drill holes in them (see the basic instruction at the beginning of the article). If you do not have the tool, and you are satisfied adhesive way Fastening, then immediately proceed to the next stage.

Step 2. To the branches, tie the twine as shown in the photo, measure it from it about 7 cm of length and cut off the surplus.

• If you use sinks with holes, then the twine must be cut off immediately the desired length with a margin on the nodules.

Step 3. Stick the shell to the twine with a drop of thermo-glue. Then, to another end of the shell, take another 7-centimeter twine thread. Continue work until you arrive the length of the first row.

• Shells with holes can be tied up on a thread at least in two ways: tie nodes around the holes or under them (the node should be greater than the hole).

Step 4. Continue hanging threads with seashells to the desired number. At the same time, you can play with a long row to form, say, arch or ladder. IN this case Wind music has alternating short and long threads.

Step 5. When the product is ready, there will be another segment of the twine at both ends of the branch.

According to the principles of this master class, but replacing the branch of the hoops or adding the shells by starfish, beads, feathers and other decor, you can create more bizarre wind music designs.

Idea 8. Make a bracelet from Kauri shell

If you have at least one shell of Kauri, then you can make your own hands from a boho style bracelet for hand or legs. All accessories for such decoration you can buy in stores for needlework or in large sewing stores.

Materials:

• One Kauri Shell;
• 1 m silk lace;
• Half of the Millina of the contrasting color;
• Beads (in this master class are copper beads from the old bracelet);
• A pair of crimp tribes with hinges (intended for cords and bracelets);
• Zippers for jewelry (in the form of rings or carbine);
• Ring for the fastener (detachable);
• Scissors;
• Pliers.

Instruction:

Step 1. Drill at the two ends of Kauri over the small hole (see basic instructions at the beginning of the article).

Step 2. Cut about 15 cm from the Silk Lace Moke and set this segment for a while.

Step 3. Skip the silk lace about half the length through one shell hole and tie the node.

Step 4. Skip the other end of the cord through the middle part of the sink and tie the knot on the second hole.

Step 5. Cut a few threads of Moulin, collect them and fold the resulting bunch around a silk lace next to the shell as shown in the photo.

Step 6. Take a short lace segment, wrap it tightly around the top of the folded threads of Moulin, tie a nodule and cut off the surplus. You will have a brush. Fuck it and push with scissors if necessary.

Step 7. Start ripping beads on both ends of the bracelet. After the desired length is achieved, bend the ends of the cords in half and shove the resulting tips to the crimping limits.

Step 8. Use pliers to clamp the tips on the bracelet tips, and then cut the excess cord.

Step 9. With the help of pliers to one end, attach the ring, and to the other - the fastener. Your shell bracelet is ready!

20 Average rating: 4,50 out of 5)

Seafood decor in marine style. Master class with step-by-step photos.

Razumova Valentina Nikolaevna, educator MDOU "Schukhobodsky kindergarten", Schukhogod's village.
Description: In this master class, I offer options for decorating a bottle of marine style. Material can be useful creative peoplewho are fond of making crafts for home with their own hands.
Purpose: The use of such exclusive bottles can be different: a gift, an interior decoration in the marine style, a flower vase.
Purpose: Making a vase from glass bottle in the marine style.
Tasks:
* develop creative potential, fantasy;
* find the use of a throwing, natural, as well as any prickly material;
* To acquaint with the technology of manufacturing a vase (decoupage with cloth, appliqué from natural and infrident material);
* Develop the ability to work with various materials and tools.

Option number 1.

Materials for manufacture:
* Glass bottle original shape;
* Gold paint spray on acrylic basis;
* Glue "Moment-installation";
* Materials for decorating: shells, beads, coins, pebbles, beads, buttons, etc.
* stained glass shine;
* Any transparent glue: "Moment", super glue "
* Acetone to clean the bottle.

Our bottle must be pre-cleaned from the stickers and traces of glue. To do this, the bottle is soaked in water, rub the stickers. You can with the help of iron washcloth. Traces of adhesive are well cleaned with acetone or solvent.

We apply acetone on a cloth and rub. Observe caution using chemical substances. Here is the result: a clean bottle.

Having finished S. dirty work, Establish your work.
We take beads, put on the neck of the Bottle Glue "Moment-installation" a fairly thick layer and wind the thread beads around the neck.

Glue, which I use very convenient: well fixes various materials, You can work on glass and slippery surfaces, does not smell, it does not dry immediately, it is possible to correct errors.
The bead thread is located on a flat surface of the bottle, fixing glue. Excess then we will cut down (when the glue will dry a little, so that the beads do not roll from the thread).

Next, we begin to fantasize: we apply "moment-installation" with a thick layer and have seashells, coins and any other materials that we have at hand so that it is beautiful and aesthetically. Completely disaggregated.

Fill in this way the entire surface of the face:

I leave a place for a heart pebble, which is glued later. We wait for the glue dry. The most difficult thing is to wait, so I usually make several crafts in parallel.
We take the gold paint-spray on an acrylic basis. A completely wonderful thing. It is easily applied - sprayed, quickly dries. But it has an unpleasant smell, so if children are better not to use.

Cover the gold paint our bottle from all sides. We get an amazing result. At least I really like it.

Other angles:

I stick a beautiful pebble and beads to the places left. I use any glue available at your disposal. The main thing is to quickly grabbed and was transparent ("moment", "super-glue").

You can still, if you wish, go through some details of our vase stained glass.

Our marine vase is ready.

You can create a thematic corner in the interior:

You can put flowers in a vase.

Option number 2.

Materials:
* Glass bottle;
* tissue tissue;
* PVA glue;
* White acrylic paint;
* Blue Koler;
* Transparent glue: "moment", "super-glue", universal polymeric;
* brushes, sponge for staining;
* stained glass paints with glitter;
* Materials for decorating: shells, coins, buttons, fish, beads, etc.;
* scissors;
* Marker silver.

We proceed to the manufacture of the second vase. Bottle are preventing: wipe alcohol or acetone. Stickers in this case are not necessary.
We will, first, execute decoupage with cloth. Almost everyone is familiar with a napkin decoupage. But this technique (decoupage) is quite diverse and rich in options.
So, we cut the fabric strips are wide enough. It is better to use fine natural fabric. I have a sitherium, not new, quite worn (old pillowcase).

Magnify the tissue strips in PVA glue (not thick, liquid enough, if necessary, dilute with water).

Slightly press the fabric and start gluing it to a bottle, forming beautiful folds. Fantasize, create!
I got such a result:

On the other hand:

We are waiting for drying our vase. The process is quite long. You can use a hairdryer for drying the product. After waiting, we begin to glue the seashells, coins into the folds of our sea, and everything that you want that you are associated with the sea.

Start in staining our sea. With the help of white acrylic paint and the color of blue, there are two shades necessary for us to work: a more dark and lightweight.
First, we paint the brush to a more dark blue color to our vase, looking well all the folds.

When drying, we paint brightly blue, not so carefully, on top of folds. Paints will be combined and move one to another. For coloring use brushes or sponge.

With a closer look, it looks like this:

Seeing our vase. We proceed to stained with stained glass. We apply it to brush arbitrarily over the entire surface.

Use the shine of a blue shade.

Again, we look forward to when our beauty is dry and starting to create further. Armed with a variety of beads, we stick them with beautiful things on our sea as you like. Create interesting compositions.

Fish as a silver marker.

If you want to get a unique and creative design of the room, refer to Handmade techniques. To create unusual art objects, you will need low-cost infringement materials, imagination and some free time. Today we will tell, as such a completely ordinary household item, like a bottle can become original gift, addition festive table. or a practical element of the decor.

1. Sali decor

The process of decorating salt is so simple that even a child can cope with him. Therefore, attend your young inhabitants at home, and proceed to creativity. Pleasant pastime I. excellent result You are provided.

To start take the bottle beautiful form And clean it from the labels. Then proceed to the treatment of salt. It can be painted with paint or chalk. Divide the total weight into several parts, and then paint each of them acrylic or gouache in different color, mix. Dry the resulting mass - do it traditional wayOr warm in the oven for an hour.

If you want to use chalk, the portions of the spices will need to decompose on dense paper and grasp them with colored chalk. This method is best suited for a small amount of material. By the way, salt should be a large, sea or himalayan.

After you have prepared a salt, carefully place it in container with colored layers using sheets for flow regulation. Try not to move the vessel so that the crystals are not mixed with each other. To obtain smooth lines, it is enough to gently tilt the bottle to the sides.

2. Decor croups

This type of decoration bottles in its own way. appearance And the execution method resembles the decoration of salt, only instead of it falls asleep millet, buckwheat, wheat, rice, peas, beans, lentils and large spices. Everything is extremely simple: fall asleep every species of grievances as well as in the case of salt crystals. The finished scenery is visually echoing also with decorative conservation, but in this case you can not be afraid of sudden explosions under adverse temperatures.

Separate attention deserves the decoration of bottles of the semolia. It is separated by the surface to create exquisite patterns. The perfect image can be obtained thanks to the stencils, and if you encountered a task for the first time, refer to double-sided adhesive basics.

3. Coloring

Another non-futured way decorating, but not less attractive than others. You can choose transparent stained glass or acrylic paintsFor registration of internal or external space.

Bottle coloring from the inside does not require special skills or tools. Prepare the container, boil it, and then dry. After these procedures, paint one or more colors, pour inside. For uniform distributionRotate the vessel until all areas are painted.

With the help of painting outside, you can portray any conceived composition: whether it is an inscription with congratulations, patterns, or even a landscape. First, clean and degrease the surface. Background color apply with a washcloth or sponge. As soon as the base is completely dry, proceed to apply the ornament itself, dry. Fasten the image of lacquer or slightly sandpaper shallow emery paper. For a glossy image, apply several layers of varnish, giving each of them to dry.

4. Decoupage

Using this technique, you can easily turn the most ordinary bottle into a wonderful gift or the original decor element. In addition, this creative process is quite simple!

To start, wash and degrease the vessel. Then evenly or arbitrarily caught it with a cloth, a kapron stocking or burlap. On what material you would stop, it must be impregnated with glue.

Seeing the bottle, paint it with a white acrylic, and drink again. At this time, manicure scissors do trust the ornament of napkins and very carefully separate it upper layer. The resulting image attach to the surface of the dishes and cover the napkin acrylic varnish. Try to work quickly and gently, otherwise you risk gaining extra folds and bubbles. After the substance snacks, apply acrylic the selected shade to the area around the drawing, capturing its boundaries. Consiser again. Color the final layer acrylic and, if you wish, continue decoring with small elements - lace, beads, sequins can be quite appropriate.

5. Decor Spagata

Bottles covered with twine look very modern. They will complement any interior in the marine, rustic, scandinavian styleOr become a supplement to the festive entouge.

As in other cases, the first stage of work is to remove labels and thorough washing, drying. Moch inner side Spigata with glue and turn the product tightly threads. After the adhesive can dry, continue to decorate if necessary, for example, anchors and rescue circles for marine style, or lace for Shebbi-Chic style. It is worth noting that when decorating alone with a twine, quite original and interesting subject, perfectly inscribed in almost any room.

6. Decor vegetables and fruits

Decorative canning is an excellent alternative to painting and decoupage. The transfiguration product will look natural and naturally, organically fit into the kitchen decoration. This is not the easiest method, but the result will definitely please, and you will not regret the efforts spent.

Select a transparent bottle unusual shape, Separate the label and get rid of glue, wash and carefully sterinate it. In parallel with the sterilization, prepare products (fruits, vegetables, spices), and to measure them to clean them. Come up with order and post the ingredients following him. Best alternate products different color and sizes.

To carry out the conservation itself, use a concentrated vinegar, salt solution, formalin or ethyl alcohol. Please note that some of these substances are volatile and dangerous, so you should be extremely careful when interacting with them. Use funnel, gloves, and if necessary, wear a rubberized apron and respirator. At the end, fill the neck with melted wax and close the contents of the lid.

7. Flower decor

If you appreciate tender beauty Flowers and think that without their presence, the interior seems to be boring and "non-living", then the usual bottle will help keep the fresh plant type for a long time. Capacity can be combined with inflorescences, it is used for growing indoor plantsOr just as a vase.

Canning is done very easily. Pull the flowers in the pre-sterilized container and fill them with glycerin. Put in a dark cool place for 2-3 weeks. Completed flower composition Looks beautiful and weightless.

In order for the bottle cozy home For indoor plants, do the following manipulations. Take a small rope and impregnate it with alcohol, wrap around a glass bottle, separating it in half, and burn it up - so you get two parts. In the upper land plant, and pour water into the bottom, or leave it empty. Put the neck to the resulting glass - the original pot is ready.

Also in the container can also be installed and conventional flowers. Remove the surface of the paint or using the decoupage technique, or simply embark on the decorative sand and put the blooming branch in it.

8. Decor egg shell

The egg shell is able to give an interesting embossed texture. There are many variations of transfigurations by this method, but in general, the principle of creating such a decor object for any modification is the same.

Start from the preparation of the shell - well wash it, clean the film and dry. Apply glue on the glass of bottles and lay out the pattern. Dry for 20 minutes. Apply the chipped with a sponge you choose, and if it is difficult to get to some sites, use the brush. Next, take the paint on the tone darker, and work it all the plane. The result fasten with varnish.

Abstract images and curly lines are created by paint, so think in advance what exactly you want to get and squeeze the drawing before proceeding with direct staining.

9. Decor sparkles and gold

The flickering attribute will add to the New Year or wedding table notes of elegant luxury. It is especially pleasant to create similar jewelry with your own hands.

At first it is necessary to remove labels from the bottle using the dishwashing agent, or hahewing the hairdryer. After the vessel is prepared, spread paper, cellophane or tissue, and place the containers. Put the gloves so that your hands remain clean. Go to the coating of gold aerosol paint. In order to avoid drowshes, it is necessary to apply it at a distance of about 10-15 centimeters, without affirming the balloon too close. You need to apply 2 layers, after which give the product to dry.

Master class conducted Elena Norshakevich.

Memories of summer ... Probably, they come to each person in winter. We offer to plunge into the summer, creating this unusual gift bottle.

Materials.
A bottle for decorating;
Primer adhesion (for smooth surfaces - glasses, plastic, metal);
Primer artistic;
Acrylic paints;
Acrylic varnish;
Acrylic white powder;
PVA glue;
"Liquid Nails";
Lacquer removal fluid, dishwashing detergents, for washing glass, alcohol, vodka (something to choose from for degreasing glass);
Elements for decorating, for example: shells, chain, buckwheat cereals (or beads of different shapes and sizes), twine (sesame thread);
Napkin with a pattern of three-layer;
Printing Pictures on a laser printer;
Brushes, toothpick, sandpaper "Zero" (the smallest), scissors, narrow and wide tape;
Polyurethane clamping roller with handle (usually used when sticking wallpaper);
Sponge for washing dishes (new);
Empty plastic bottles with spout (from paint for hair, glue or other materials), purely washed.

Progress.
The bottle is soaked in water room temperature to remove labels. Labels remove, wipe the bottle dry. We apply any means for degreasing on a bottle, carefully wipe, dried.

In this case, it is important that it was clear what a drink in the bottle. Therefore, the cover with inscriptions will not be touched. In order not to blur the cover of the primer, we stick a narrow stationery tape at the bottom edge of the lid.
From the sponge for washing the dishes, we cut off approximately 1/4 of the part and the shredded movements with a smooth layer applied with the help of a sponge the primer on the bottle, without painting the neck and bottom. Leave to dry. When the bottle is completely dry, the bottom of the bottom and again west. Remove the scotch (Fig. 1).

Cut the picture. Thinking it with the help of a wide scotch. To do this, on the opposite side of the picture we glue the tape (stripes of therapy), smoothing and pressing well. The tape is then very accurately removed - with it, a thin layer of white paper will be removed.

We apply the glue PVA to the desired section of the bottle and on the picture on the back, we glue the picture and roll the roller. So glue will evenly distribute and air bubbles between the picture and the bottle is not formed. We leave until complete drying (Fig. 2).

2

According to the reverse side of the bottle, there will be a volume anchor. First you need to post a pencil drawing. Then the putty is a little weaving with water to such a state so that it squeezes out of the bottles, but did not spread. Fill the bottles (one nose has a thoroughly, in the other - the same). To determine the desired consistency of putty, you can apply a drawing on paper and wait for drying (Fig. 3).

Apply putty drawing anchors. The whole anchor is made of a bottle with a thicker spout, and the edges at the ends - with thin. When the anchor is completely dry, its shape and smoothness will adjust with toothpicks. Holding her under a small angle to the drawing, carefully remove the irregularities. It is possible with a weak pressure to recover anchor by the sandpaper "zero" (Fig. 4).

4

With the help of a pistol with " liquid nails»Blind decorative elements - Chain, seashells, cereals or beads. The chain is covered with the same primer that was used for a bottle (Fig. 5,6). We leave until complete drying.

5

6

We make the main background with putty. For this, a small rigid brush is gaining a putty and smears in a different direction to a bottle. You can give the desired texture with the same toothpick. We leave until complete drying. If necessary, gently sandwith the sandpaper "zero" (Fig. 7).

7

We apply an artistic soil on the bottle, painting all the recesses and details.

Mix the paint for the main background. Prettyly miss the whole bottle, except the neck. After drying, we check that there are no not scratched areas (Fig. 8).

8

In the paint, mixed for the main background, add white paint. Select the resulting tone of the convex elements of the bottle. It is better to do this dry brush, pick up a little paints (Fig. 9).

9

If when working on the neck, it fell a bit of paint - we remove with a wet chopstick. The dried bottle is covered with varnish in one layer. So it becomes clearer - whether the parts at the details are enough.

For best Effect We add shades into recesses on the shells and on the main background - green or blue paint, diluted with water almost to watercolor condition. The main thing is moderation. We cover a dry bottle of varnish in several layers with complete intermediate drying. You can drive more layers of varnish on the picture than on the entire bottle - for greater shine and gloss.

The final stage of work is to decorate the neck. To do this, you will need a napkin for a suitable coloring and sesame thread. From the napkins cut the circle desired size, remove the two lower white layers. The napkin is placed on top on the lid and, making neat folds, press it to the neck of the bottle, taking the thread. Bottle ready!