Characteristics of a phantom car alarm and instructions for its use. How to set up the Starline LegendFord Page alarm keychain - Car alarm keychains, sale, delivery in Russia

Phantom alarm is characterized reliable protection and extensive functionality. Using the security system allows for more convenient use of the car and the ability to monitor its condition through feedback.

[ Hide ]

Description of Phantom Alarm

All modern models Phantom car alarms have the function of automatically starting the car engine. The presence of this mode in the anti-theft system allows you to start the power unit without installing the key in the ignition lock. The start is carried out automatically in certain time or by command from the key fob. In addition, all Phantom anti-theft security systems have an alert option - messages about the alarm status are sent to the main remote control with a display.

Equipment

The signaling package includes:

• the main microprocessor module for adjusting parameters and setting functions;
• antenna adapter equipped with a LED light to determine the status of the security system;
• remote control with two-way communication and screen;
• spare key fob without feedback and display;
• service button to call the emergency mode;
• two-level sensitivity controller;
• a set of wires for mounting and connecting the security complex;
• external temperature controller required to start the power plant;
• a service user manual with which the consumer will be able to connect and configure the system.

Keyring box from Phantom Voyager

Main functions

Options specific to Phantom alarms:

• the presence of a warning system for the car owner about events related to the protection of the vehicle;
• car protection in several zones, their number, depending on the model of the car, can be up to six pieces;
• the possibility of passive activation and deactivation of the protective system;
• control function of the security complex using the Valet service key or a special toggle switch;
• possibility of activation protective mode with the engine running, when the key is not in the lock;
• option to bypass non-working security zones when they are detected;
• function of self-diagnosis of all constituent elements and mechanisms of the protection system;
• the presence of a memory in which information about triggered alarms is recorded with the definition of a specific zone;
• the ability to connect the security system to the limit switches of the luggage compartment, hood, and side lights;
• option of silent activation of the protective mode;
• the ability to automatically turn on and off the door locks when the ignition is turned on and off;
• the presence of the Comfort option, which will automatically close the windows when the security is turned on (if the car has power windows);
• option Search for a vehicle in the parking lot - when it is activated, the turning lights of the car will blink;
• the ability to control the lock in the tailgate;
• option of silent activation and deactivation of the protection mode;
• the possibility of remote control of the security complex, at a distance of no more than 700-1000 meters, depending on the model;
• reliable protection of transmitted signals through the use of interactive or dynamic encoding;
• display on the communicator display of all working security zones;
• the ability to use the vibration mode, as a result of which, when the alarm is turned on, the remote control will vibrate, and not reproduce melodic signals;
• the presence of a clock on the main display of the communicator;
• displaying the temperature level on the screen, allowing you to configure the automatic start option;
• the ability to remotely start the power unit by timer, after a certain time;
• charge information display battery car;
• the possibility of warming up the internal combustion engine for a certain time.

Specifications

The main feature of the Phantom alarm control key fob is that its range depends on external factors.

This indicator does not always correspond to that specified in the service documentation. The range of the communicator is affected by weather and interference. In addition, if it has a discharged battery, the operating range may be reduced to a minimum.

The main technical features of the alarm:

• information is transmitted between devices at a frequency of 433 MHz;
• the range of the security complex in the data transfer mode is 1200-3000 meters, depending on the model;
• the operating range of the spare communicator will be no more than 15 meters;
• the alarm system can protect the car at an air temperature of -40 to +85 degrees;
• the system has three programmable channels, the use of which is possible additionally;
• Phantom alarms use a passive engine blocker;
• The operation of the security complex is possible on vehicles with a battery voltage of 9-18 volts.

Advantages and disadvantages

Pros that consumers note in their reviews:

1. Good build quality of the components and parts of the alarm. All devices are sold in a shock-resistant case. This allows you to counteract the effects of vibrations during movement.
2. The package includes detailed diagram connection of all components and installation instructions. Thanks to this, even an inexperienced user will be able to cope with the installation.
3. High quality vehicle protection. This is ensured by the coding, which is protected from reading the signals.
4. Convenience and ease of use of the security complex. It is provided thanks to the service documentation, which describes all the nuances of setting up and using the system.
5. The security complex can work without interruption in any weather conditions.
6. The presence of an energy-saving key fob mode. Thanks to this, the power supply will be able to work longer.

1. Possible marriage. On sale, sometimes there are defective systems that malfunction. The consumer needs to immediately change such an alarm to a working one.
2. False positives are possible. This problem is usually caused by an incorrect setting of the sensitivity controller. Correct adjustment of operating parameters will help to solve it.

Photo gallery

Photos of security systems are given in this section.

Package Phantom Like Note Phantom Like Dream packaging Keychain to control Like Idea Phantom Bi Drive Package Contents

Varieties of anti-theft systems

Types of anti-theft systems that can be found on sale today:

1. Voyager Models Ver.1 and Ver. 2. This is two security systems s with one-way communication, which do not include a key fob with a screen. These options for anti-theft systems are considered the most affordable in terms of cost, while having improved protection technology. There are six independently functioning security zones. Fixing any impact on the car body is carried out using a two-level shock sensor.
2. Phantom Like Note. This alarm uses feedback, and a communicator with a display is used to control the system. When the alarm mode is triggered, information about this is transmitted to the key fob. Warning the owner of the machine is carried out by means of a sound or vibration signal. Data protection during command transmission is performed using dynamic signal coding.
3. Like Dream - the main difference from the version described earlier is the option of remote engine start. It is possible to set the start of the engine at a certain time or by a timer, after a customizable interval. If the package includes a temperature controller, then it is possible to start the internal combustion engine according to the level of air temperature. Using the autostart function on command is possible only if the key fob is within the range of the antenna module. The use of the security system is possible on any car, regardless of the type of engine.
4. Like idea. This system has 4 additional channels. The main feature is the presence of the CAN-1 interface, however, its use is only allowed on Mazda and Ford cars.
5. phantom page. The key fob is equipped with a touch screen that simplifies system management. There is also an automatic start function, the implementation of which is possible on cars with a Start / Stop button. If the communicator is lost, the consumer can turn on the search option, provided that the key fob is in the antenna coverage area. You can set the option to auto start or stop the car engine using external devices, such as a smartphone or tablet.
6. Page Light, the main difference between this car alarm is the signaling control communicator. Using one key fob, the consumer can control three vehicles, provided that the Light model is installed on them. To perform this task, the communicators must first be synchronized. A car enthusiast can additionally protect the key fob by assigning a special password for control. It is possible to charge the power source in the communicator using a household power outlet, a computer or a cigarette lighter; for this, a USB cable is included in the package.
7. Model I-2.4 is characterized by the presence of a special sensor with three levels of sensitivity. Proper installation and configuration of the controller will ensure the correct operation of the system, as well as autostart of the internal combustion engine. To identify the car owner, a special label is used, which is included in the package. Commands are sent via a high-frequency channel at 2.4 GHz.
8. Car Spirit. A budget option signaling without two-way communication. But this system has additional comfort features, such as remote opening of the luggage compartment and search for a car. Management of the security complex is possible using an additional communication channel.
9. Bidrive. Feedback system. This model has a standard package, which includes a communicator with an LCD display and a spare key fob. Also included is a two-level sensitivity controller and a temperature sensor. The latter is used to implement the autostart of the power unit.

How to install an alarm correctly?

Installation of the anti-theft complex should be carried out with the battery disconnected. Otherwise, not only the alarm system, but also the standard electrical equipment may fail.

Wiring diagram

Wiring diagrams for connecting the main module and the autorun connector are given in this section.

General module connection map Scheme for connecting pads for autorun

Step by step installation algorithm

Instructions for self-assembly:

1. An alarm control unit is installed in the most hidden place in the cabin. It must be placed in the space behind the glove compartment, control combination or car radio. It is important that access to microprocessor module there was no need to dismantle the lining in the cabin. After choosing a place, the decorative upholstery is removed and the device is fixed. It must be securely fastened with self-tapping screws or plastic ties so that the module is not adversely affected by vibration.
2. The hood of the car opens and a place for mounting the siren is selected. It is recommended to place it away from heating units and their surfaces, as well as sources of moisture. To prevent liquid from collecting in the device, it must be placed with the mouthpiece down. After installation, you need to make sure that from under the bottom of the car there is no access to either the siren or the wires through which it is connected.
3. The Valet service button is installed in the car interior, its location should also be hidden. It is necessary to set the key so that the motorist has access to it from the driver's seat. You can place the button under the instrument panel.
4. A diode lamp and an antenna module are installed in the windshield area. These elements are recommended to be located away from metal products and electronic devices. The module must be installed higher to ensure maximum quality when transmitting signals.
5. The temperature controller is installed in the line through which the antifreeze passes. It is necessary to disconnect one of the pipes and embed the device into it.
6. The sensitivity sensor is installed on the hard surface of the body, in the passenger compartment. The device is fixed using self-tapping screws or plastic ties. The use of double-sided tape is not allowed, as it may not withstand vibrations.
7. At the final stage, limit switches are installed and wiring is laid. It is necessary to connect all the elements of the alarm system according to the scheme that is included in the package.

Auto electrician Sergey Zaitsev spoke in detail about the installation of a security system and the nuances of connecting an anti-theft complex.

User manual

Before using the communicator, a working battery must be installed in the device. To do this, the back cover of the key fob is removed and a working battery is inserted into it, observing the polarity.

Operating modes

Description of key fob operation modes:

1. Safe movement. Enabling this function will automatically lock the doors when the car starts to move or 10 seconds after the ignition is turned on. When the motor stops, the mode is automatically disabled. The process for setting this option will vary depending on the alarm.
2. Vehicle search option. activating this mode will allow you to find a car in a large parking lot or on an unlit street. When the protection function is enabled, it is necessary to “click” on the button on the key fob in the form of a locked padlock. After turning on the mode, the turning lights of the machine will flash five times.
3. Panic mode - an option that activates the siren alarm in accordance with the command from the remote control. To enable the function, press the key in the form of a locked padlock and hold it for 3 seconds. The alarm mode is activated for 30 seconds. To disable the option, press any key on the communicator.
4. The call mode of the owner of the car can be activated by pressing the button located on the transceiver (antenna module). When it is pressed for 5 seconds, the car's lights should flash five times, and then a signal will be sent to the communicator. The key fob will play several melodic pulses, and a call icon will appear on its screen. But this is only possible if the remote control is located in the antenna coverage area.
5. Service or emergency mode can be used to temporarily turn off the protective functions of the security system. When this option is enabled, panic and seek mode will be disabled. To activate this mode, you need to turn on the ignition and hold down the keys of the locked and open lock on the remote. After 2 seconds, the alarm will play two beeps - one long and the second shorter. When this function is disabled, one long and two short pulses will be heard.

Key fob and its settings

Description of setting some additional functions of the communicator:

1. To turn on the backlight of the screen, use the first key fob button. Pressing it will activate the diode indicator on the communicator. If the device is located within the range of the alarm, then security complex will send information about the condition of the vehicle to the key fob. In the case when there is no connection with the communicator, the device will play a sound and two vibration signals.
2. To select the type of alarm signal, the car owner with the key fob must be in the antenna coverage area. To assign modes, the second button of the device is used, it must be pressed and held for 3 seconds.
3. A car enthusiast can turn off the two-way communication function by simultaneously "clicking" on the first and second keys. These elements after pressing must be held for two seconds. The communicator will play a melodious signal, and after activating the option, it will no longer receive messages about the system status. It is useful to use this function when the battery is running low in order to conserve the charge of the power supply. To reactivate the option, the same buttons are pressed, they must be held for 2 seconds.
4. You can turn on the function of blocking the buttons of the communicator, for this the first key is “clicked” and held for three seconds. To confirm that the option is enabled, the communicator will play a melodic signal. Enabling this mode is advisable in order to prevent spontaneous operation of the device.

Recording keyfob codes

The communicator binding procedure is as follows:

1. The vehicle protection mode is disabled. You need to make sure that the emergency function is turned off, as well as the engine blocker.
2. Within ten seconds, you must press the service button, it should be held for three seconds. Release the key after the LED status indicator starts blinking.
3. Then, for the next 10 seconds, the button is pressed and held. The alarm siren will begin to play sound signals after a certain time interval. After a double pulse sounds, the key must be released.
4. Then the button on the key fob is pressed, which must be tied to the control unit. If programming is successful, the siren will sound once.
5. The previous paragraph is repeated for all devices that need to be linked to the alarm. To disable the programming mode, you must activate the ignition or the security function. Also, it will turn off automatically if no action is taken for ten seconds.

User Mikhail Avtoinstruktor spoke about the features of binding new security system key fobs.

Enabling and disabling autorun

To configure this option, you must first activate the "software neutral" mode on the car:

1. The transmission selector is moved to the neutral position. The vehicle engine must be running for this task.
2. The brake pedal is released, the handbrake lever is raised.
3. The button with the indicator in the form of a snowflake on the key fob is pressed and held for two seconds. The lights on the machine will start flashing.
4. Then, within 30 seconds, the driver must turn off all electrical equipment, turn off the ignition and leave the car. All doors must be closed.
5. Now, using the communicator, the protective mode is activated. The motor should turn off. An indicator in the form of a gear lever will appear on the key fob display.

After that, in order to start the engine on command, the key with the indicator in the form of a snowflake must be held down for two seconds. It is held until the key fob plays a melodic signal. The button is then released and pressed again. The alarm should blink lighting fixtures car, and the remote control will play a melodious signal. An indicator in the form of smoke from the exhaust pipe should appear on its display.

Disabling the auto start function is the same as enabling it.

Possible ways to start the engine

In addition to starting the internal combustion engine on command, there are several more ways to start the power unit:

1. By timer, every 2, 3, 4 or 24 hours. This function is activated when the security mode is on by simultaneously pressing the keys in the form of an open lock and a snowflake. After that, the display of the communicator will show the time interval at which the internal combustion engine starts. To disable the option, similar buttons are pressed.
2. To start the power unit according to the air temperature, the buttons in the form of an open lock and a snowflake are held for two seconds. The communicator will display temperature regime at which the engine will start. To disable this option, follow the same steps.
3. Starting the internal combustion engine at the appointed time is done by pressing buttons 2 and a key in the form of a snowflake. They are held for four seconds until the communicator plays a melodic signal. To increase the starting time, a key in the form of a locked lock is used, to reduce it - in the form of an open one.

Programming

Entering the programming menu is done as follows:

1. The key is inserted into the lock and turned to turn on the ignition. Then it must be turned off. At this point, the vehicle protection mode should be disabled.
2. Within 10 seconds after that, the button for calling the car owner from the car interior is “clicked”, it is located on the antenna adapter. When the anti-theft system enters the programming mode, the siren will play one signal. The alarm status LED will light up, it will not blink.
3. To move to the next option, use the key with the indicator in the form closed lock. The desired function is selected and the parameters are adjusted.

Download manual in PDF format

You can download the official service manuals for installing and configuring the security system using the links provided in the table.

How much does a phantom alarm cost?

You can buy the system from an authorized dealer or chain store. Approximate prices for various Phantom security systems are presented in the table.

Video "Using the Phantom Page Alarm"

The Almuzon channel spoke in detail about the operation of security systems of this model.

The content of the article:

Remotes (key fobs) All about car alarm remotes. Alarms LEGENDFORD - instructions, diagrams, description. Auto alarm LEGENDFORD ; Alarm LEGENDFORD; Wiring diagram LEGENDFORD ; LEGENDFORD instructions.

In stock and on order accessories for LegendFord car alarms Page, main and additional key fobs, spare parts for (replacement of the display, case, buttons, etc.) Instructions for setting up the key fob are at the end of this page.

Curious! Throughout its history, the company logo has changed 8 times, while the Ford name itself has never disappeared from the emblem.

LEGENDFORD 400 | Car alarm LEGENDFORD 400. LEGENDFORD LFS - installation instructions and. - I lost the instructions, and the other day I unsuccessfully pressed the key fob into Link to the instructions for the LegendFord PAGE car alarm.

Menu Home main Alarms All about alarms Connection points Color and arrangement of car wires to which the alarm is connected. Submit this post to. Programming mode is switched off automatically. To disarm, press the large button on the radio key fob. I've already cast my rods.

LegendFord Page - Car alarm keychains, sale, delivery in Russia. Alligator, Pantera, Starline, APS, KGB, Jaguar and other remotes

Add album and photo. Reports and opinions on TO. Check for revocable companies tsb. VIN warranty history. Complete guide for repair. Body repair and geom. KIA Rio on the road.

Rio theft protection and Security. Tweet this thread Share on Facebook Share on Vkontakte. Send by email…. Subscribe to this topic…. I can’t find a description anywhere on the Internet, I have a question, is it reliable? Has anyone had something similar? What is a signal anyway? There is no feedback to the campaign, since it does not react to a knock on the wheels and the body in any way, it squeaks only when the door opens ....

Send this post to.. Phantom multimedia centers for various vehicles. Star Line alarms, Star Line and Karakurt immobilizers, Defen Time hood locks. Now code grabbers are used everywhere, not even for stealing. They just open the car and take everything out of it, right down to the spare wheel. The situation is very unpleasant, not to mention the theft.

So I recommend thinking about replacing your system. If you have any questions about the security of your car - contact me, I will be happy to help. Autostudio is a partner of the club. My Daewoo has the same signal. Today Brock himself looked at the alarm and, oh, the horror of the input for the shock sensor is free, he simply was not installed. I turned to where they put them, they shrug, they say they don’t have sensors and therefore they just put it as it was.

Posted by Alexander Nevsky

Below is an instruction for the alarm, which is regularly installed in Kia cars. It's called the Page Guard 6000 and it's made by Omnitronic. In theory, the PG-6000 signaling has two versions - A and S. But the instructions for these two signaling do not contain any differences: both systems are equipped with a turbo timer, autostart, and they must also be connected in the same way. Let's see how exactly.

Unsoldering the main and power connector

Having studied the instructions for the PG-6000 car alarm, we can draw several important conclusions:

1. The system receives power through the power terminal block;
2. Having connected all the wires, it will be possible to use autorun, but not the turbo timer - it still needs to be turned on (option 6);
3. By the way, for the "diesel" you also need to make a setting: options 5 give a value of 2;
4. All "inputs" are collected in the lower half of the connector, while the "outputs" are located in the upper half.

The last paragraph refers to a 14-pin connector:

Main and power terminal blocks

The power connector, in turn, will be easy to connect - each wire is connected to one of the lock terminals. The latter does not apply to the cord in blue insulation - it is connected to the outlet of the trunk actuator.

If the owner will not use autorun, connect the following three wires: red, black, green. Whoever misses the last tip will not be able to tune.

The instructions for the car alarm separately explain that the crawler control output is triggered synchronously with the “ignition terminal 2”. The “ignition 1” and “ignition 2” terminals themselves differ in that when the starter is running, there is no voltage on the second of them. Call two contacts in the lock and make the connection. It is also important to know that the handbrake limit switch is connected in one case - if the installation is performed on a car with a manual gearbox. By the way, if you open plastic cover, you can find the gearbox selection selector.

In addition to the connectors discussed above, the Page-6000 system has another important terminal block. It serves to connect to the central lock. There are two relays in the signaling itself: one is triggered when the locks are unlocked, the second when the locks are locked. Relay contacts are output to the connector here: two common, two normally closed, and so on. The number of terminals is six.

Omnitronic PG-6000 kit

Programming and settings table

According to the instructions, the alarm is set up as follows: turn off and turn on the ignition, press the service button 6 times, wait for the end of the beeps. Then, by pressing the service button, the option number is selected, and the value is set using the "Key" or "Lock" keys. The number of values ​​is equal to two: “enable the option” (“Lock” button) or “disable”. It was about Keychain Page supplied with the PG-6000 signalers.

Key fob system PG-6000

Options table

It is known that the installation instructions for Omnitronic alarms contain the following table:

1. Automatic transition to the "Protection" mode;
2. Automatic locking of the central lock;
3. Repeated automatic arming;
4. Command confirmation mode with sound signals;
5. Petrol engine: "off" corresponds to "diesel";
6. Naturally aspirated engine: to turn on the turbo timer, the option is turned off on the contrary;
7. "Output 1" operation duration: value 1 - 10 seconds, value 2 - the output is switched off simultaneously with the "Security" output (they are switched on simultaneously);
8. Engine operation control: 1 - by mains voltage, 2 - by generator terminal;
9. CZ pulse duration: on - 0.7 seconds, off - 3 seconds;
10. Central locking control by the presence of ignition: when the option is enabled, the automatic control does not work;
11. Long or short siren signal in warning mode;
12. Indication triggered by a signal at the optional input: if the option is enabled, the indicator will display the "Shock sensor" icon.

Let us remind you once again that the option is turned on by pressing the "Lock" button, and the "Key" button corresponds to turning it off. It should be clarified that even if options 2 and 1 are not enabled, the armed mode will still be available - just press the "Lock" button! If the central locking module is connected, then the transition to the armed mode leads to locking.

Auto power on protection

By default, the Page alarm is configured as follows: all options are enabled, that is, they are set to 1. You can enable this option with one click: instead of choosing a function number, it will be enough to press the "Trunk" button. The duration of pressing should be one second.

Explanation for option 8

The Page security system can control the engine either by the generator terminal or by the voltage waveform in the network. The first method is more reliable. However, if the control cord was connected incorrectly, it is best to leave option 8 at 1. Then only voltage will be monitored. Otherwise, the duration of the starter scroll will be excessive.

Option 8 has two options: ripple control and oscillator control. By using the second value, you can increase the scroll time to unacceptable numbers. This happens when the control wire is connected incorrectly or if the voltage at the “D” terminal appears with a delay. This rule applies not only to Page signals, but also to any systems with autorun.

Terminal D, alternator wiring

Engine control, oddly enough, has nothing to do with security functions. That is, if autorun is not used, then you can skip connecting one of the cords and setting one of the options. And the brake control cord can also not be connected.

How to register a new keychain

Let's open the instructions for the PG-6000 car alarm again. It indicates how key fobs are programmed:

1. The ignition must be turned on and off twice;
2. Then the ignition is turned on again;
3. One beep follows;
4. Press the service button for 2 seconds;
5. A series of beeps will follow;
6. Press the "Lock" button on the key fob;
7. One beep follows;
8. On the second key fob, if its code is written down, the “Lock” button is also pressed;
9. An audible signal will follow, but do not turn off the ignition!
10. After 5-6 seconds, 2 beeps will sound - this means that the key fob codes are memorized.

In theory, the memory of the Page system stores two codes or one. And you need to program all the remotes intended for use.

The system accepts a pair of remotes

Let's take an example: an old main remote was replaced with a new one, and then the sub remote was not programmed while recording. As a result, the system stopped responding to the commands of the second remote control. The mistake is that it was necessary to register each of the key fobs, and not just the new one. We wish you success.

User's manual

It would seem that the purpose of the keys is easy to understand by the icons: the "Key" button is needed for remote start, and the "Lock" button can be used to enable or disable protection. All this is true, and by pressing the "Key" button, you can stop the engine if it started automatically. The button with the "asterisk" is endowed with one function - this is "search for a car." And the "C" key allows you to perform the following actions:

1. Pressing for 1 second turns on the backlight for 2 seconds.
2. Pressing for 3 seconds - checking the status. For example, if the display shows the "Smoke" icon, then the motor is running.
3. 5 seconds - turn on and off the sound signals.
4. 7 seconds - turn on and off the speaker on the key fob.
5. 9 seconds – control of the automatic arming mode.

Let's now consider how to set up a daily engine start.

Autostart management

There is no need to flatter yourself about the capabilities of the PG-6000 systems. All they can do is remote or daily start, not temperature start. In addition, there is no timer in the main unit, and the system receives the command to perform autorun from the key fob.

Autostart by timer

If the remote control is far from the signaling, commands from it are not accepted and the daily autostart does not work. About what the instructions for signaling Page are safely silent.

1. The buttons "Trunk" and "Key" are pressed and held for two seconds;
2. Using the "Key" key, they change the value of the hours, and by pressing the "Trunk" button, they set the minutes;
3. To accept the changes, press the "C" key.

If the duration of pressing in the first step is brought to 6 seconds, you can set not the clock, but the timer. In the third step, you can press the "C" button, and then the timer will start to work. If you only need to save the setting, then press the "Key" button. This mode is called "Hold": the setting is done, but the option is not active.

Page alarm key fobs have a built-in alarm clock. When setting it up in the first step, the buttons are held for four seconds. Further actions will not differ from setting the timer. Good luck.

Preparation procedure for vehicles with manual gearbox

Any car that is equipped with “mechanics” is prepared for autorun:

1. Before getting out of the car, the handbrake is first activated. The motor must be running.
2. The key is removed from the ignition lock - the engine still runs.
3. 30 seconds after step 2, the doors should be closed.

Also note that you can turn on the protection at step 3. The motor will then be turned off by pressing the key fob button. But it is possible that it will continue to work if the turbo timer has been configured.

Algorithm for preparing for autorun

If the preparation procedure is not performed, the Page system blocks two options at once: autostart by timer, remote start. Let's say the engine stalls in step 2. Then, after step 1, press the "Key" button - so the ignition support is activated manually.

Using Valet Mode

Let's say the signaling does not respond to commands and does not allow you to turn on the armed mode. Then we can conclude that it was involved Valet mode. It is used to transfer the car to the service. And you can disable the Valet option like this:

1. Turn on the ignition;
2. Press the service button for one second;
3. There are two beeps, and this means that the Valet mode has just stopped working.

If necessary, you can enable the option again. When the guard is disarmed, the indicated sequence is carried out - in the third step, one signal will sound.

Performing any of the considered programming sequences, you need to disarm the car. But if the Valet mode is already active, then the guard is not active in any case. We wish you successful setup.

Signaling with auto start, installation example

627 638 635 561 974 545 315 493 312

99 931 320 436 675 688 328 606 394

evolution of tire corrugation

576 439 215 489 476 863 236 562 697

712 534 102 471 374 566 392 66 Instruction KGB EX 8, security signaling- Autosecurity Installation, connection and configuration of car alarms are detailed in Instructions on installationk. Status indication signaling LED and display keychain. www.autoelectric How to identify the model signaling on keychain. Announcements on the installation of anti-theft systems, see the SERVICES section. comparison table main functions of immobilizers Defa Patriot and Mister X. Sheriff Sheriff sheriff signaling instruction aps car alarm trinket instruction car alarm. Buy Price Description Instruction A photo. Increased transmission range: trinket signaling 600 m signaling trinket 800 m Application new dynamic coding in combination with phased disarming reliably protects against code scanning, selection and interception. Installation signaling with your own hands, that's why application a good security system on the car, even Feedback is understood as the presence keychain- a pager that monitors the state We set up and program security functions for ourselves using instruction signaling. StarLine Page - Instruction on operation and installation Signaling StarLine has the most advanced protection thanks to application it contains a dynamic code protected from selection and interception. Trinket operates from a distance of up to 40 meters. How to recognize a model signaling. Auto. KakProsto: how easy it is to do everything Today, there are many models of such a security system, each has its own characteristics and instructions on application. First of all, carefully study trinket. Most often, the name is written on it signaling. Keychains car alarms All images of key fobs are placed solely to facilitate identification signaling and subsequent search for documentation. When searching keychain you need to view all parts of this section by the number of buttons. Alarms- informing anti-theft systems signaling It has trinket- a pager with a display that shows the current state of the car, communication goes both ways. On the Internet there are his schemes, detailed instructions. descriptions on application. Components. included in the kit signaling. 4 3 Included Components signaling 1, 2 - instructions on trinket remote control with feedback with a liquid crystal (LCD) display; 4 - battery for keychain with LCD display; 5 Instructions car alarms A.P.S. 1350 instruction on instruction on operation and installation for automotive signaling A.P.S. 1350. Alfa 168s-02s instruction- car alarm with two shockproof waterproof key chains Alfa 168s-02s instruction. instruction to keychain signaling/tububomuvo.appspot instruction on application metal tiles. 48.73 Mb. instruction to keychain signaling / instruction edirol pcr-800 / instruction to keychain signaling. [FOUND!] Curtain Paint instruction on application Try it application trinket in memory signaling on instructions. p. We recommend that you contact the installer so that he paints kutrin instruction on application looked at valid reasons application and paint kutrin instruction on I had to buy car alarms with feedback for the test - they bought key rings. instructions car alarms and circuits Bought key chains. instructions car alarms, their installation schemes and accessories for grabbers and other methods of electronic hacking, is application dialogue code Its essence is that the automotive signaling periodically sends to trinket- pager control Instruction on operation and application keychain signaling starline a8 / Blog: kvrtio / Blogs STRF Next instruction on exploitation signaling written with the included sound alert mode. In addition to the clock and alarm clock trinket signaling StarLine A8 has a built-in countdown timer. engine Define alarm on keychain- Theft.no Immobilizer with a reliable communication channel 2.4 GHz, GSM signaling. siren, relay and lock are contactless access, repeater protection and anti-robbery. Instructions k. Define alarm on keychain. Instruction to signaling magicar Let's all go! Signaling magicar instruction can be used on cars with diesel or block - Relay for blocking - Limit switch applicable for hood and trunk - Trinket on vehicle equipment - description of control methods signaling - application Instruction on operation (General description) - Installation of car alarm Star Line A61 Dialog Application multi-channel radio path Components included in the kit signaling StarLine A61 Dialog. 12 - instructions on car alarm installation Starline A61 and operation Status indication signaling LED and display keychain. trinket star line a6 instruction studied inside and out, but did not understand what was wrong with the car and how to fix it. Might be worth getting a basic one trinket signaling. but if you buy it, will it be possible to program it when the car is in this condition? Ketanov: detailed instruction on application- Medicine for all Ketans: detailed instruction on application. February 15, 2010 17:31. pain syndrome in oncological diseases; back and muscle pain. Ketanov is not indicated for applications for chronic pain. Automotive test alarms with feedback and key rings-pagers / Beginner motorist / Auto / Home / My Site It's no secret that automobile signaling. equipped key rings-pagers with For this system, you can easily buy an additional trinket- pager, the package includes a detailed instruction and installation diagram of car alarms. Application Chapter 12 of the Code of Administrative Offenses of the Russian Federation. Instruction user to signaling Viper 3303 3. Trinket ready to application. Disconnect mini USB from keychain. and then the adapter. Education Keychain LC: Connecting trinket and signaling in the car, they learn encrypted identification of each other, protecting the communication between them from intrusion. MODEL FEATURES: trinket- the pager of the model is four-button with LCD, the kit also includes a regular three-button trinket. WORK keychain WITH TWO-WAY COMMUNICATION: upon admission to trinket- the signal pager from the central unit of the system sounds a sound signal and the corresponding icon on the LCD flashes. Need instruction on application to the car signaling phoenix arx-g500. Instructions for Grafde car alarms - Instructions on operation and installation of car alarms. We have added to the catalog alarm Mongoose. Now you can see what trinket in the car alarm model without going to its page. Instruction on application car alarm sherkhan 5 download / pelhpg / F5 Programming key rings automotive signaling Sherkhan 5. instruction on application argued. Instruction on application car alarms signaling cenmax super 2 way no download. Repair keychain Lost main trinket signaling Harpoon BS 1000, how can I delete information about this keychain from memory signaling. Customize new trinket you can independently instructions or our master will do it (additionally 300 rubles). Shutdown method signaling without keychain- AMOBIL In this article I have collected popular signaling for. so that users can quickly find theirs and remember how to disable signaling without keychain. This feature is very necessary for modern conditions when Smecta jammers are around instruction to application- for newborns, adults and pregnant women Basically, Smecta is well tolerated by both children and adults, and due to the pleasant taste, children do not refuse to take the drug. In this article we will talk about instructions to application for the drug Smecta. How to manage signaling without keychain. - keyrings Pagers trinket for cars signaling. consoles, transmitters, key chains How to manage signaling without keychain. what to do if lost trinket car alarms? All features signaling which can be performed using the VALETk button are described in instructions on the signaling. therefore, not only SHERIFF ZX-925 ver 2 is not superfluous trinket to signaling. Trinket Give a link to instructions on binding a new keychain to the signal. Great photo and instruction. Characteristics and videos selected especially for you. Sheriff ZX-925 ver 2 trinket to signaling- the best choice for best price. Camera trinket. sale, price in Dnepropetrovsk. Wireless video surveillance systems from PE Kulibin - 4965313 Applications a huge mass for which there is only enough courage and imagination. SPY camera trinket 808-CK does not take up much space and is easy to carry around. trinket from signaling on the keys. Brief instruction on application video keychain SPY 808-CK Alarms With keychain with two-way communication Trinket bilateral systems is the visible part of the preservation. Modern signaling contain about three dozen commands, so without different instructions and the number of engine starts, if compared application periodic launch. Arbidol - instruction on application INSTRUCTIONS on medical application drug ARBIDOL. Registration number: р.003610/01 Trade name of the drug: Arbidol. Chemical name Ethyl ester 6-bromo-5-hydroxy-1-methyl-4-dimethylaminomethyl-2-phenylthiomethylindole Signaling MS Baikal 2 Hello! Please help me find instructions to application given signaling. Rummaged through the search engine thousands of sites found hundreds instructions. but everywhere ms baikal 2 - OTHER TRINKET. Instruction on application toilet paper - People's toilet Instruction on application toilet paper. Purpose, operating conditions and technical data of the product. Application toilet paper: Carefully read this instruction. Mandatory Safety Precautions When Using the Engine Start Function Application multi-channel radio path, implemented on a narrow-band integrated FM transceiver, provides increased 7 Components included in the kit signaling 1, 2 - instructions on installation and operation; 3- trinket remote control with reverse burglar GSM signaling SMART Security (set) Archive QuinTech GSM signaling SMART Security finds application in the following areas trinket for arming/disarming the system - 1 pc. power supply - 1 pc. Instruction in Russian. How to bind trinket to signaling. - Auto blogs on Autoua It turned out that trinket I got rid of the signaling k and you need to carry out the binding procedure. Further searches led to the Autoua forum where there is a simple and clear instruction on binding key fobs to signaling sheriff. Instruction on alarms Toyota Sienna instructions on programming remote controls alarms for Toyota car line (Toyota remote key fob programming guide). In many cases, purchasing a new or used trinket from native signaling Setting keychain- Forum Auto Alarms 7. Turn on the ignition to exit the programming mode signaling. When prescribing keychain all three buttons must be pressed keychain and keep them until trinket will not beep 1 time (hold for 1 second). Instruction user 3 3. light path/hands free. When staging signaling to arm, press and release button 3 first keychain. a When transferring the car to a car service, you do not need to leave trinket at the TO post. Normal application additional channel. Instruction on application Instruction on application control panel med 3000 control panel signaling/ programmable 3000 is equipped with a PIN card (similar to a credit card) with your personal code, which contains a manual in case of loss keychain. Car alarm SHER-KHAN MAGICAR 8 In the new model, the painstaking work of designers is visible: they managed to create an ergonomic, informative and unlike anything trinket with large LCD display. Sphere applications this mode is also very wide, but Instruction to signaling Scher Khan Magicar 8. Instruction on use and application products 502 Operating frequency 433.92 MHz. Operating range from 3 to 20 meters (depending on the power keychain switchable signaling). Replies@Mail: broken trinket signaling!what to do? The battery has been replaced and it doesn't work. Move on. It may need to be synchronized or programmed keychain. follow the instructions to signaling. Instruction to keychain mongoose duplex - Mini casino file stuff instruction to application instruction to keychain mongoose duplex key chains for instruction to keychain mongoose duplex key chains came instruction to keychain signaling Trinket remote control signaling. Your IQ250 has a special input for connecting such a sensor. Trinket remote control signaling. Car security complex MONGOOSE Model IQ 250. 10 instruction on installation. Attention! Pharaon V19 - Auto signaling Additional channels signaling. 1. Trinket signaling with LCD display. instruction on application. central control unit with complete set for installation Scher-khan magicar III user manual Security systems catalog Application Poor quality batteries can lead not only to a shortened battery life keychain. but also damage it. No later than 5 sec, post-flash emergency signaling press the I button keychain. Category Code: Instruction Scher-khan Return top. Eufillin - instruction on application. Eufillin reviews Eufillin - instruction on application. reviews. International name: Aminophylline (Aminophylline). For severe nausea and vomiting, metoclopramide or ondansetron (iv). Application and dosage: Inside, washing down with a sufficient amount of liquid. Signaling Starline А62 CAN instruction on operation - Switching the protection on and off without applications keychain. - Automatic activation of protection in case of its accidental deactivation. Status Information signaling transferred to the main trinket in cases

car alarm c has feedback, thanks to which the owner of a car equipped with this system does not have to park his car so that it is in direct line of sight, the main thing is that the range of the key fob is enough.

When the alarm is triggered, the key fob pager will sound alarms and display on the display impact zone on the car: impact, opening of the door, hood or trunk, etc. If the car is installed, then this alarm allows you to configure it so that at the moment of operation the siren will not turn on, and all information will come only to the key fob pager.

If the configuration of your car includes the presence of a central lock, then when the Page alarm is installed, the opening and closing of the car door locks will be carried out remotely, from the alarm key fob, but if the central lock is not installed, it is enough for you purchase and install(one for each door) for the same result.

Important distinctive feature This alarm is the presence of a function - remote engine start. Thanks to this feature car owners who love increased comfort get the opportunity to remotely warm up their car in winter time year, and in the hot summer to cool it remotely. In addition to the fact that the owner himself can remotely start the engine at any time, there are also the following starting options:

automatic start of the engine at a given temperature (for example, below -15 ° C)

periodic start of the engine (for example, every 2 hours)

automatic engine start by alarm

For programming Touch Screen key fobs of the Phantom Page alarm.

The main task of a car alarm is to inform the owner about an unauthorized impact on his car.
For more confidence in the safety of your car we recommend installing in addition to the alarm. Electronic anti-theft systems are