Instructions for car alarm key fob page. Characteristics of a car alarm phantom and instructions for its use

Water bodies 02.07.2019

Water bodies

The Phantom alarm is characterized by reliable protection and the presence of extensive functionality. The use of a security system allows for more convenient use of the car and the ability to monitor its condition through feedback.

[Hide]

Description of the Phantom alarm

Everything modern models Phantom car alarms have the function of automatically starting the car engine. The presence of this mode in the anti-theft system allows you to start the power unit without installing a key in the ignition lock. The launch is carried out automatically in certain time or by command from the remote control. In addition, all Phantom anti-theft security systems have an alert option - messages about the alarm status are sent to the main control panel with a display.

Equipment

The delivery set of the signaling includes:

main microprocessor module for adjusting parameters and setting functions;
antenna adapter equipped with an LED lamp to determine the state of the security system;
remote control with two-way communication and screen;
spare key fob without feedback and display;
service button for calling emergency mode;
two-level sensitivity controller;
a set of wires for installation and connection of the security complex;
external temperature controller required for starting the power plant;
service manual of the user, with the help of which the consumer can connect and configure the system.

Phantom Voyager Keychain Box

Main functions

Options specific to the Phantom alarms:

availability of a car owner notification system about security events vehicle;
car protection in several zones, their number, depending on the car model, can be up to six pieces;
the ability to passively enable and disable the protective system;
control function of the security complex using the Valet service key or a special toggle switch;
possibility of activation protective mode with the engine running, when the key is not in the lock;
option to bypass non-working security zones when they are detected;
self-diagnosis function of all constituent elements and mechanisms of the protection system;
the presence of a memory in which information about triggered alarms is recorded with the definition of a specific zone;
the ability to connect the security system to the limit switches of the luggage compartment, hood, as well as side lights;
option of silent activation of the protective mode;
opportunity automatic switching on and disabling door locks when activating and turning off the ignition;
the presence of the Comfort option, which will automatically close the windows when the security is turned on (if the car is equipped with power windows);
the option of Finding a vehicle in the parking lot - when activated, the turning lights of the car will blink;
the ability to control the lock in the tailgate;
option of silent activation and deactivation of protection mode;
the ability to remotely control the security complex, at a distance of no more than 700-1000 meters, depending on the model;
reliable protection of transmitted signals through the use of dialogue or dynamic coding;
display of all active security zones on the communicator display;
the ability to use vibration mode, as a result of which, when an alarm is triggered, the console will vibrate, and not play melodic signals;
the presence of a clock on the main display of the communicator;
display of the temperature level on the screen, allowing you to configure the automatic start option;
the ability to remotely start the power unit by timer, after a certain time;
display of charge information battery car;
the ability to warm up the internal combustion engine for a certain time.

Specifications

The main feature of the Phantom alarm control keyfob is that its range depends on external factors.

This indicator does not always correspond to that indicated in the service documentation. The range of the communicator is affected by weather and interference. In addition, if there is a discharged battery in it, the operating range can be reduced to a minimum.

The main technical features alarms:

information transfer between devices is carried out at a frequency of 433 MHz;
the range of the security complex in the data transmission mode is 1200-3000 meters, depending on the model;
the operating range of the spare communicator will be no more than 15 meters;
the alarm can guard the car at air temperatures from -40 to +85 degrees;
the system has three programmable channels, the use of which is possible additionally;
Phantom alarms use a passive engine blocker;
the work of the security complex is possible on vehicles with a battery voltage of 9-18 volts.

Advantages and disadvantages

Pros that consumers note in their reviews:

Good build quality of constituent elements and signaling parts. All devices are supplied in a shock-resistant housing. This allows vibration to be counteracted while driving.
The package includes detailed diagram connections of all components and installation instructions. Thanks to this, an inexperienced user can also cope with the installation.
High-quality vehicle protection. This is ensured by an encoding that is protected against reading signals.
Convenience and ease of operation of the security complex. It is provided thanks to service documentation, which describes all the nuances of setting up and using the system.
The security complex can work without interruption in any weather conditions.
The presence of an energy-saving mode of the key fob. This allows the power supply to last longer.

Possible marriage. There are sometimes defective systems on sale that do not work properly. The consumer needs to immediately change such an alarm to a working one.
False positives are possible. This problem is usually caused by incorrect setting of the sensitivity controller. Correct adjustment of operating parameters will help to solve it.

Photo gallery

Photos of security complexes are given in this section.

Phantom Like Note Package Phantom Like Dream packaging Keychain to control Like Idea Phantom Bi Drive Package Contents

Varieties of anti-theft systems

Types of anti-theft systems that can be found on sale today:

Voyager Models Ver. 1 and Ver. 2. These are two security systems One-way communication, which does not include a key fob with a screen. These options for anti-theft systems are considered the most affordable in terms of cost, while having advanced protection technology. There are six security zones independently functioning from each other. Fixation of any impacts on the car body is carried out using a two-level shock sensor.
Phantom Like Note. This signaling uses feedback and uses a display communicator to control the system. When the alarm mode is triggered, information about this is transmitted to the key fob. The owner of the machine is warned by means of a sound or vibration signal. Data protection during command transmission is performed using dynamic signal coding.
Like Dream - the main difference from the previously described version is the availability of the option for remote start of the motor. It is possible to configure the start of the engine at a certain time or by timer, at a configurable interval. If a temperature controller is included in the package, then the ICE can be started according to the air temperature level. The use of the autostart function on command is possible only if the key fob is within the range of the antenna module. The use of the security system is possible on any car, regardless of the type of engine.
Like Idea. This system has 4 additional channels. The main feature is the presence of the CAN-1 interface, but its use is allowed only on Mazda and Ford cars.
Phantom Page. The key fob is equipped with a touch screen that simplifies system control. There is also an automatic start function, which can be implemented on vehicles with a Start / Stop button. If the communicator is lost, the user can turn on the search option, provided that the key fob is within the antenna coverage area. You can configure the option to automatically start or stop the car engine using external devices, for example, a smartphone or tablet.
Page Light, the main difference between this car alarm is the signaling control communicator. Using one key fob, the consumer can drive three vehicles, provided that they are equipped with the Light model. To accomplish this task, the communicators must first be synchronized. The car enthusiast can additionally protect the key fob by assigning a special control password. It is possible to charge the power supply in the communicator using a household power supply, a computer or a cigarette lighter; for this, a USB cable is included in the package.
Model I-2.4 is characterized by a special sensor with three sensitivity levels. Correct installation and configuring the controller will provide correct work systems, as well as autostart of the internal combustion engine. To identify the car owner, a special tag is used, which is included in the package. Commands are sent over a 2.4 GHz high-frequency channel.
Cars Spirit. A budget option signaling without two-way communication. But in this system, additional comfort functions are implemented, such as remote opening of the luggage compartment and search for a car. Management of the security complex is possible using an additional communication channel.
Bi Drive. System with feedback option. This model comes standard with an LCD communicator and a spare key fob. Also included is a two-level sensitivity controller and a temperature sensor. The latter is used to implement the autostart of the power unit.

How to install the alarm correctly?

The anti-theft complex must be installed with the battery disconnected. Otherwise, not only the alarm system, but also the standard electrical equipment may fail.

Connection diagram

Wiring diagrams for connecting the main module and the autostart connector are shown in this section.

General module connection card Pads connection diagram for autostart

Step-by-step installation algorithm

Self-assembly instructions:

The alarm control unit is installed in the most hidden place in the cabin. It must be located in the space behind the glove compartment, control combination or car radio. It is important that access to microprocessor module there was no need to dismantle the lining in the cabin. After choosing a place, the decorative upholstery is removed and the device is fixed. It must be securely fixed with self-tapping screws or plastic ties so that the module is not exposed to negative impact vibration.
The hood of the car is opened and a place is selected for mounting the siren. It is recommended to place it away from heating units and their surfaces, as well as sources of moisture. To prevent liquid from collecting in the device, it must be placed with the horn down. After installation, you need to make sure that from under the bottom of the car there is no access to the siren or to the wires through which it is connected.
The Jack service button is installed in the car interior, its location should also be hidden. The key must be installed so that the motorist has access to it from the driver's seat. You can position the button under the dashboard.
Near windshield a diode lamp and an antenna module are installed. It is recommended to place these elements away from metal products and electronic devices... The module should be installed higher in order to ensure maximum quality during signal transmission.
The temperature controller is installed in the line through which the antifreeze passes. It is necessary to disconnect one of the nozzles and cut the device into it.
The sensitivity sensor is installed on a hard surface of the body, in the car interior. The device is fixed using self-tapping screws or plastic ties. The use of double-sided tape is not allowed, as it may not withstand vibration if exposed.
In the final stage, the limit switches are installed and the wiring is laid. It is necessary to connect all the alarm elements according to the scheme that is included in the package.

Auto electrician Sergey Zaitsev spoke in detail about the installation of the security system and the nuances of connecting the anti-theft complex.

User manual

Before using the communicator, a working battery must be installed in the device. To do this, remove the back cover of the key fob and insert a working battery into it observing the polarity.

Modes of operation

Description of keyfob operation modes:

Safe driving. Enabling this function will automatically lock the doors when the car starts moving or 10 seconds after turning on the ignition. When the motor stops, the mode is automatically disabled. The process for setting this option will be different depending on the alarm.
Vehicle search option. activating this mode will allow you to find a car in a large parking lot or on an unlit street. When the protection function is enabled, it is necessary to "click" on the button on the key fob in the form of a locked lock. After turning on the mode, the headlights of the machine will flash five times.
Panic mode - an option that triggers the siren alarm in accordance with a command from the keypad. To enable the function, press the key in the form of a locked padlock and hold it for 3 seconds. The alarm mode is activated for 30 sec. To disable the option, press any key of the communicator.
The owner call mode can be activated by pressing the button located on the transceiver (antenna module). When you hold it down for 5 seconds, the vehicle lights should flash five times, and then a signal will be sent to the communicator. The key fob will play several melodic impulses, and a call icon will appear on its screen. But this is only possible if the remote control is located in the antenna coverage area.
Service or emergency mode can be used to temporarily disable the security functions of the security system. When this option is enabled, panic and search mode will be disabled. To activate this mode, you must turn on the ignition and hold down the keys of the locked and open lock on the remote. After 2 seconds, the alarm will sound two beeps - one long and one shorter. When this function is disabled, one long and two short pulses will be heard.

Control key fob and its settings

Description of setting some additional functions communicator:

To turn on the backlight of the screen, use the first button of the key fob. Pressing it will activate the diode indicator on the communicator. If the device is located within the range of the alarm, then security complex will send information about the state of the vehicle to the key fob. If there is no communication with the communicator, the device will play a sound and two vibration signals.
To select the type of alarm, the car owner with the key fob must be within the coverage area of the antenna. To assign modes, the second button of the device is used, it must be pressed and held for 3 seconds.
A car enthusiast can disable the two-way communication function by simultaneously "clicking" on the first and second keys. After pressing, these elements must be held for two seconds. The communicator will play a melodic signal, and after activating the option, it will no longer receive messages about the system status. It is useful to use this function when the battery is discharging in order to conserve the power supply. To reactivate the option, the same buttons are clamped, they must be held for 2 seconds.
You can turn on the function of blocking the communicator buttons, for this the first key is “clicked” and held for three seconds. To confirm that the option is enabled, the communicator will play a melodic signal. Enabling this mode is advisable in order to prevent spontaneous operation of the device.

Keyfob Codes Recording

The communicator binding procedure is performed as follows:

The vehicle protection mode is deactivated. Make sure that the emergency function is turned off, as well as the engine blocker.
Within ten seconds, you must press the service button, it must be held for three seconds. Release the key after the status LED starts blinking.
Then, for the next 10 seconds, the button is pressed and held. The alarm siren will start playing sound signals at a specified time interval. After a double impulse sounds, the key must be released.
Then the button on the key fob is pressed, which must be tied to the control unit. If the programming is successful, the siren will sound once.
The previous point is repeated for all devices that need to be linked to the alarm. To turn off the programming mode, you must activate the ignition or the security function. It will also turn off automatically if no action is taken for ten seconds.

User Mikhail Avtoinstruktor told about the peculiarities of binding new key fobs of the security system.

Enabling and disabling autorun

To configure this option, the vehicle must first activate the "program neutral" mode:

The transmission selector is placed in neutral. The vehicle engine must be running when performing this task.
The brake pedal is released, the handbrake lever is raised.
The button with the indicator in the form of a snowflake on the key fob is pressed and held for two seconds. The lights on the machine will start blinking.
Then, within 30 seconds, the driver must turn off all electrical equipment, turn off the ignition and leave the car. All doors must be closed.
Now, using the communicator, the protection mode is activated. The motor should shut off. An indicator in the form of a gear lever will appear on the key fob display.

After that, in order to start the engine on command, the button with the indicator in the form of a snowflake must be pressed for two seconds. It is held until the key fob plays a melodic signal. Then the button is released and pressed again. Alarm should blink lighting fixtures the car, and the remote control will play a melodic signal. An indicator in the form of smoke from the exhaust pipe should appear on its display.

Disabling the autostart function is the same as enabling it.

Possible ways to start the engine

In addition to starting the internal combustion engine on command, there are several more ways to start the power unit:

By timer, every 2, 3, 4 or 24 hours. This function is activated when the security mode is on by simultaneously pressing the keys in the form of an open lock and a snowflake. After that, the communicator display will show the time interval at which the internal combustion engine is started. To disable the option, similar buttons are pressed.
To start the power unit according to the air temperature, the buttons in the form of an open lock and a snowflake are held for two seconds. The communicator displays temperature regime, at which the engine will start. To disable this option, follow the same steps.
The ICE is started at the appointed time by pressing buttons 2 and a key in the form of a snowflake. They are held for four seconds until the communicator plays a melodic signal. To increase the start-up time, use a key in the form of a locked lock, to reduce - in the form of an open one.

Programming

The programming menu is entered as follows:

The key is inserted into the lock and turned to turn on the ignition. Then it must be turned off. At this point, the vehicle protection mode should be disabled.
Within 10 seconds after that, the button to call the car owner from the car is "clicked"; it is located on the antenna adapter. At the entrance anti-theft system in the programming mode, the siren will play one signal. The alarm status LED will light up, it will not blink.
To go to the next option, use a key with an indicator in the form closed castle... The function is selected and the parameters are adjusted.

Download instruction in PDF format

You can download the official service manuals for installing and configuring the security system using the links provided in the table.

How much does the Phantom alarm cost?

You can buy the system from an authorized dealer or at chain store... Approximate prices for various Phantom security systems are presented in the table.

Video "Using the Phantom Page Alarm"

Channel "Almuzon" spoke in detail about the operation of security systems of this model.

Below are instructions for the alarm system that is standardly installed in Kia vehicles. It is called Page Guard 6000 and is produced by Omnitronic. In theory, the PG-6000 signaling has two versions - A and S. But the instructions for these two signaling devices do not contain any differences: both systems are equipped with a turbo timer, auto start, and they must also be connected according to the same scheme. Let's see how exactly.

Wiring the main and power connectors

Having studied the instructions for the PG-6000 car alarm, you can draw several important conclusions:

The system receives power through the power terminal block;
Having connected all the wires, it will be possible to use the autostart, but not the turbo timer - it still needs to be turned on (option 6);
By the way, for the "diesel" it is also necessary to carry out the adjustment: option 5 is assigned a value of 2;
All "inputs" are located in the lower half of the connector, while the upper half contains the "outputs".

The last paragraph refers to the 14-pin connector:

Main and power terminal blocks

The power connector, in turn, will be easy to connect - each wire is connected to one of the lock terminals. The latter does not apply to the blue insulation cord - it is connected to the trunk actuator tap.

If the owner will not use autostart, connect the following three wires: red, black, green. Who will miss last advice, will not be able to configure.

In the instructions for the car alarm, it is separately explained that the crawler control output is triggered synchronously with the "ignition terminal 2". The terminals "ignition 1" and "ignition 2" themselves differ in that when the starter is operating, there is no voltage on the second of them. Call two contacts in the lock and connect. It is also important to know that the handbrake limit switch is connected in one case - if the installation is performed on a car with a manual gearbox. By the way, if you open plastic cover, you can find the gearbox selection selector.

In addition to the connectors discussed above, the Page-6000 system has another important terminal block. It serves to connect to the central lock. In the signaling itself there are two relays: one is triggered when the locks are unlocked, the second when the locks are locked. Relay contacts are displayed on the connector here: two common, two normally closed, and so on. The number of terminals is six.

Omnitronic PG-6000 kit

Programming and setting table

According to the instructions, the alarm is set up as follows: turn off and turn on the ignition, press the service button 6 times, wait for the end of the sound signals. Then, by pressing the service button, select the option number, and use the "Key" or "Lock" keys to set the value. The number of values is equal to two: "enable option" (button "Lock") or "disable". It was about Keychain Page attached to the signaling PG-6000.

Keyfob system PG-6000

Options table

It is known that the installation instructions for Omnitronic alarms contain the following table:

Automatic transition to the "Protection" mode;
Automatic locking of the central lock;
Repeated automatic arming;
Command confirmation mode by sound signals;
Gasoline engine: the value "off" corresponds to "diesel";
Naturally aspirated engine: to turn on the turbo timer, the option is turned off on the contrary;
Duration of the "output 1" actuation: value 1 - 10 seconds, value 2 - the output is disabled simultaneously with the "Guard" output (they are enabled simultaneously);
Engine operation control: 1 - by mains voltage, 2 - by generator terminal;
Central lock pulse duration: on - 0.7 seconds, off - 3 seconds;
Central lock control by ignition presence: when the option is enabled, the automatic control unit does not work;
Long or short siren signal in warning mode;
Triggering of indication on signal at the optional input: if this option is enabled, the indicator will display the "Shock sensor" icon.

Let us remind you once again that the option is turned on by pressing the "Lock" button, and the "Key" button corresponds to deactivation. It should be clarified that even if options 2 and 1 are not activated, the security mode will still be available - just press the "Lock" button! If the central locking module is connected, then the transition to the armed mode leads to locking.

Automatic arming

By default, the Page signal is configured as follows: all options are enabled, that is, they are in the value 1. You can activate this option with one click: instead of choosing a function number, it will be enough to press the "Trunk" button. The duration of pressing should be one second.

Explanation of option 8

The Page alarm system can monitor the engine either by the generator terminal or by the waveform of the mains voltage. The first method is more reliable. However, if the test cord was incorrectly connected, it is best to leave option 8 at 1. Then only voltage will be monitored. Otherwise, the cranking time of the starter will be excessive.

Option 8 has two values: pulsation control and generator control. By using the second value, you can increase the scroll time to unacceptable numbers. This happens when the control wire is connected incorrectly or if the voltage at the "D" terminal appears with a delay. This rule applies not only to Page signals, but also to any systems with autorun.

Terminal D alternator wiring

Engine control, oddly enough, has nothing to do with security functions. That is, if autorun is not used, then you can skip connecting one of the cords and setting one of the options. And the brake control cord does not need to be connected either.

How to register a new keychain

Open the instructions for the PG-6000 car alarm again. It shows how the keyfobs are programmed:

The ignition must be turned on and off twice;
Then the ignition is turned on again;
One beep follows;
Press the service button for 2 seconds;
A series of beeps will follow;
Press the "Lock" button on the key fob;
One beep follows;
On the second key fob, if its code is recorded, the "Lock" button is also pressed;
A beep will follow, but do not turn off the ignition!
After 5-6 seconds, 2 signals will sound - this means that the keyfob codes are memorized.

In theory, the memory of the Page system stores two codes or one. And you need to program all the consoles intended for use.

The system accepts a pair of remotes

Consider an example: the old main console was replaced with a new one, and then, while recording, the additional console was not programmed. As a result, the system stopped responding to the commands of the second remote control. The mistake was that it was necessary to register each of the key fobs, and not just the new one. We wish you success.

User guide

It would seem that the purpose of the keys is easy to understand from the icons: the "Key" button is needed for remote starting, and the "Lock" button can be used to activate or deactivate the security. All this is so, and by pressing the key "Key" you can stop the engine if it started automatically. The "star" button has one function - it is "car search". And the "C" key allows you to perform actions:

Press for 1 second - turn on the backlight for 2 seconds.
Pressing for 3 seconds - checking the status. For example, if the display shows a Smoke icon, the motor is running.
5 seconds - enable and disable sound signals.
7 seconds - turn on and off the speaker on the key fob.
9 seconds - control of the automatic arming mode.

Now let's look at how to set up the daily engine start.

Autostart control

Don't be fooled by the capabilities of the PG-6000 systems. All they can do is remote or daily triggering, but not temperature triggering. In addition, there is no timer in the main unit, and the system receives the command to perform autostart from the key fob.

Timer autostart

If the remote control is far from the signaling, the commands from it are not accepted and the daily autostart does not work. What the instruction on signaling Page safely keeps silent about.

The "Trunk" and "Key" buttons are pressed and held for two seconds;
Using the "Key" button, the hours are changed, and the minutes are set by pressing the "Trunk" button;
To accept the changes, press the "C" key.

If the duration of pressing in the first step is brought to 6 seconds, you can set not the clock, but the timer. In the third step, you can press the "C" button, and then the timer will start working. If you only need to save the setting, then press the "Key" key. This mode is called "Hold": the setting is done, but the option has no effect.

Page alarm key fobs have a built-in alarm clock. When setting it in the first step, the buttons are held for four seconds. Further actions will not differ from the setting of the timer. Good luck.

Procedure for preparing vehicles with manual gearbox

Any car that is equipped with "mechanics" is prepared for autostart:

Before getting out of the car, the handbrake is activated first. In this case, the motor should be running.
The key is removed from the ignition switch - the engine is still running.
The doors should be closed 30 seconds after step 2.

Also note that at step 3 you can arm the system. The engine will then be turned off by pressing the key fob button. But it is possible that it will continue its work if the turbo timer has been adjusted.

Algorithm for preparing for autostart

If the preparation procedure is not performed, the Page system locks two options at once: autostart by timer, remote start. Let's say the engine stalls in step 2. Then after step 1 press the "Key" button - this is how the ignition support is activated manually.

Using Valet Mode

Let's say the signaling does not respond to commands and does not allow arming. Then we can conclude that it involved Valet mode... It is used to transfer a car to a service. And you can disable the Valet option like this:

Turn on the ignition;
Press the service button for one second;
Two beeps follow, indicating that Valet mode has just exited.

If required, you can enable the option again. When the security is disabled, follow the specified sequence - in the third step, one signal will sound.

Performing any of the considered programming sequences, you need to disarm the vehicle. But if the Valet mode is already active, it means that the protection does not work in any case. We wish you successful setup.

Signalka with auto start, installation example

The content of the article:

Remotes (key fobs) All about the car alarm remotes. Alarms LEGENDFORD - instructions, diagrams, description. Auto alarm LEGENDFORD; Signaling LEGENDFORD; LEGENDFORD connection diagram; LEGENDFORD instructions.

In stock and on order, accessories for car alarms LegendFord Page, main and additional key fobs, spare parts for (replacement of the display, housing, buttons, etc.) Instructions for configuring the key fob are at the end of this page.

Curious! Throughout its history, the company logo has changed 8 times, while the name Ford itself has never disappeared from the emblem.

LEGENDFORD 400 | Car alarm LEGENDFORD 400. LEGENDFORD LFS - installation instructions and. - I lost the instruction, and the other day I unsuccessfully pressed the key fob into the Link to the instructions for the LegendFord PAGE car alarm.

Menu Home Home Alarms All about alarms Connection points Color and arrangement of car wires to which the alarm is connected. Submit this post to. The programming mode is switched off automatically. To turn off the security mode, press the large button of the radio key fob. I've already thrown my fishing rods.

LegendFord Page - Car alarm trinkets, sale, delivery across Russia. Alligator, Pantera, Starline, APS, KGB, Jaguar and other remotes

Add album and photo. Reports and reviews on maintenance. Check for revocable companies tsb. VIN warranty history. The complete guide for repair. Repair of bodywork and geom. KIA Rio on the road.

Rio Anti-Theft Protection and Security. Tweet this thread Share on Facebook Share on Vkontakte. Send by e-mail…. Subscribe to this thread…. I can't find a description anywhere on the Internet, my question is, is it reliable? Has anyone ever been given something like that? What kind of signaling is it? There is no feedback to the campaign, since it does not react to a knock on the wheels and the body in any way, it beeps only when the door opens ...

Submit this post to .. Phantom Media Centers for different cars... Star Line alarms, Star Line and Karakurt immobilizers, Defen Time hood locks. Now code grabbers are used everywhere, not even for theft. They just open the car and take everything out of it, including the spare wheel. The situation is very unpleasant, not to mention the theft.

So I recommend that you think about replacing your system. If you have any questions about the protection of your car - please contact me, I will be glad to help. Autostudio is a partner of the club. My Daewoo has the same signal. Today Brock himself looked at the alarm and, about the horror, the input for the shock sensor was free, it was simply not installed. I turned to where they put them, they shrug their shoulders, they say they have no sensors and so they just put it as it was.

Message from Alexander Nevsky ..

In the domestic market of car alarms, the manufacturer starline has proven itself well and is very popular among car owners. The article will detail how to configure the starline alarm, how to separately configure the key fob and other nuances regarding debugging the operating modes of the Starline manufacturer's alarms.

Types of key fobs and their characteristics

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe me? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Depending on the model, you can configure the starline alarm using a key fob, key fobs differ in:

operating range of the key fob;
signal frequency;
type of power supply of the key fob.

On earlier models, as well as cheap and open-loop signaling models, the operating range of a conventional key fob is approximately 500-700 m, depending on conditions. The auxiliary key fob allows you to use the key fob at a distance of 15-20m.

The situation is completely different with modern ones, they are able to maintain a signal at a distance of 1-2 km from the car, depending on the conditions, in addition, the functions of the remote control with feedback are quite extensive and allow fine tuning of the alarm to the requirements of the car owner.

If, for some reason, the main key fob does not work or has been lost, then you should use an additional key fob or an auxiliary key fob, the main thing is not to forget to purchase and set up in a timely manner. new keychain or .

The signal frequency for all key fobs is 420-440 MHz.
Batteries on ordinary key fobs are a flat battery (3V), on key fobs with feedback - 1.5V (AAA).

Alarm operating modes

Most of the models of alarms in the middle price segment of this manufacturer have a variety of sensors and operating modes that form a large multifunctional vehicle security complex. This complex includes programmed modes:

Advanced immobilizer mode.
Regular self-diagnostics of the entire alarm system.
Control of sensors, their configuration (using a remote control or a computer).
Silent guard mode ( this mode can work both with the engine running and with the engine off).
GPS vehicle location monitoring.
Service modes for configuring alarms and flashing key fobs by the user.

Modes of operation, setting up the operation of sensors using a key fob

Starline keychain setup will not cause you big problems if you study the instructions in detail and follow them. In modern key fobs with feedback, alarm control is carried out using three buttons located on the key fob. The designations on the key fob will indicate the activation of certain alarm modes.

Functions of buttons on the key fob

Button # 1

When pressed once, the standard security mode is activated, when pressed again (after about 5 seconds), the security mode is activated without sound notification.

If you press button No. 1 twice, the shock sensors control mode is activated.

If the car's ignition is on (when the engine is warming up, etc.), a single press of the button allows you to close the car doors.

Button # 2

When pressed once, the standard security mode is turned off, but if you press the button a second time (after about 5 seconds), the security is disarmed without a sound signal.

If the car's ignition is in the "on" mode, then a single press on the button No. 2 opens door locks in car.

In the event that the alarm mode suddenly triggered, but nothing threatens the car, then one press of the button will remove the car from the alarm mode.

Button # 3

Single click = enable "control" mode. In this mode, all sensors and systems are checked in forced mode.

Long-term holding of button No. 3 activates a certain mode that was pre-programmed, for example, starting the car by timer at a certain moment or entering the "Starline alarm setting" mode.

Setting the volume mode

To configure the operation of the sensors, you must have access to. The setting is carried out using the main remote control with feedback (with an LCD screen).

With the ignition off, press the service button 5 times, then turn on the ignition. There will be a sound signal of the car (5 times) and an indication signal on the key fob.

Then you need to press button number 2 on the key fob. The icons on the key fob (on the screen) will display the inscription SO UN, indicating that the volume of the sound signal has been adjusted.

To switch to the sound signal setting mode, press and hold button No. 3 for a few seconds, then quickly click on the button again. The number on the screen will light up, indicating the volume of the signal. To increase the volume, press the button number 3 once. To decrease the volume, go through all modes in a circle
(there are 9 of them), and stop at the desired signal volume. To exit the setup mode, just turn off the ignition. If the modes are not saved, then you must completely reset the alarm and re-configure all modes to suit your needs.

Configuring the operation of shock sensors

Attention! This method is suitable for the most common alarms starline models A63, A93, A64, A94, B64, B94, D64, D94, E60, E90, E61, E91.

Disarm, to switch to the sound signal setting mode, press and hold button No. 3 for a few seconds, then quickly click on the button again. A sound indication will occur, and the setting mode has been entered.
Using buttons No. 2 and No. 3 we adjust the sensitivity of the shock sensors. Button # 2 - to increase the sensitivity, # 3 - to lower the sensitivity.
To preserve the sensitivity of the shock sensors, you need to hold down button No. 3 for a few seconds, then quickly click on the button again. The results are saved. If the results are not saved, then you need to reset the settings and configure all modes again.