How to make a snow slide with your own hands step by step. Let's start construction

Many will agree that it is impossible to imagine winter without snowdrifts and ice slides. Of course, for about three months during the winter, you can think about how to make a slide out of snow. Moreover, all work can be done by hand without outside help. Such a building will be a real joy for your kids. But it will also delight adults. At the same time, all work can be done quickly and without much difficulty.

The easiest way to get a beautiful front lawn

Of course, you have seen the perfect lawn in the movies, on the alley, and perhaps on the neighbor's lawn. Those who have ever tried to grow a green area in their area will no doubt say that this is a huge job. The lawn requires careful planting, care, fertilization, watering. However, only inexperienced gardeners think so, professionals have long known about the innovative tool - liquid turf AquaGrazz.

In order to successfully build a snow slide, we will need:

• a lot of snow;
• a pair of shovels;
• much water.

All are listed here necessary tools for the construction of our slide.

Choosing a place for a slide

First, each summer resident should take care of choosing a place where it will be possible to place the slide in the future. Choose a location based on maximum security for kids, that is, the building should be located on long distance from the roadway.

Then, we check this area for spaciousness so that children can easily approach the slides. In addition, the larger the slide and the better the ice on it, the more open area will be required. Only in this case, the kids will be able to freely ride the hill.

Determine the height and length of the slide

In the marked area, you need to make a huge snow mountain, for this we throw shovels a large number of snow. It follows that we choose the height and width based on your strengths. We make it as high as possible, but within reasonable limits. However, if you want to make a children's slide, then you don't need to get carried away: in this option, we proceed from our convenience and the safety of the kids. It is clear that all work is carried out in winter, when the temperature is below zero.

In the photo there is a slide with steps

Regarding the length, lovers of this Russian fun for the winter are advised to make a slide with a length of at least 5 m, you can do a little more. However, keep in mind that for kids, a very long hill of snow should not be made.

The shape and angle of the slide

Another important point when preparing a slide, this is the choice of its shape. No need to opt for an ordinary slide, that is, a classic form. You have the opportunity to make it with many turns in different directions. For example, such a slide can be seen on the bobsleigh tracks. Or a slide with an arch is another relevant option. You can also try your own skills in making snow sculptures, you can make not just a skating rink, but fairy tale hero or a mythical figurine.

The angle of inclination is also important. You do not need to perform a very cool or, conversely, gentle option for kids. The most acceptable angle of inclination should be at least 30, but not more than 50 degrees, and then the angle must be reduced over time. That is, the hill must be made gentle. Well, for small children it is better to make a gentle slope from the snow with your own hands at the beginning of work.

Are steps necessary? Of course, if you are making a slope for young children. You can refrain from making steps if your kids are over 5 years old. And where exactly - definitely from the highest area of ​​\u200b\u200bthe hill.

Do not forget about the manufacture of sides on the sides of the steps with a height of approximately 30 centimeters. Also keep in mind that you can make small bumpers along the edges of the slope so that when skiing, the kids do not fly out of it.

Stages of pouring do-it-yourself slides

For work, we first take buckets with cool water or a hose, go up the stairs to our slope and start pouring - we are not in a hurry, we do all the work carefully so that the whole structure is not damaged. When pouring, you need to trim the surface of our slope - only in this way you can get a perfectly flat surface. Areas where pits have appeared from the liquid should be densely filled with snow and again poured with water.

Downhill sledding, skiing and ice skating, building castles from snow - this is not all the entertainment that winter gives a child. If parents want to bring real pleasure to their own child, then they definitely need to learn how to make a snow slide in the courtyard of the house.

Snow slide: making a winter attraction

To build a snow slide, you only need a little ingenuity, a free flight of fantasy and a couple of improvised tools that are sure to be found in every home.

Tools:

• metal or plastic shovel;
• scraper, construction spatula;
• spray;
• buckets and watering cans.

Usually, for the construction of a full-fledged snow slide, a small shovel is sufficient, which will help form the basis of the future structure, as well as several spatulas for leveling surfaces. A metal or plastic bucket and a pair of warm mittens will come in handy. However, depending on the complexity of the work, conditions and circumstances, you can use any other convenient at your own request.

Engineering and security

Figuring out how to make a slide out of snow is not at all difficult. However, before starting work, it is necessary to pay attention to some "secrets of engineering" that will help make the structure more durable, safe and durable.

1. First, you should choose the optimal location for placing a homemade attraction. Naturally, the longer the slope, the more fun it will be to ride.
2. In order to avoid problems with pouring and solidification of water, it is better to make the slope of the slide more gentle.
3. To protect children from injury, it is imperative to equip the roll-out onto a flat area, the plane of which will ensure uniform sliding to a complete stop.

How to make a slide out of snow: construction technology

Before proceeding with specific actions, it is necessary to protect yourself from frostbite by protecting your hands with tight ones and, if necessary, wearing warm mittens over them.

The optimal conditions for the construction of a snow slide come with the arrival of a thaw. As soon as the temperature is as close as possible to zero, and the snow becomes more tenacious, it is necessary to roll large balls, laying out the base of the future structure from them, according to the planned parameters and dimensions.

How to build a snow slide that will be comfortable and safe for a child? To do this, you need to take care of the preparation of the ladder, which will help you climb the hill without any problems. You can make an impromptu ladder from all the same snowballs laid in the form of steps. The smooth surface of the steps is easily formed with a spatula or scraper.

Filling a snow slide is best done with the arrival of hard frosts. And you need to do this by evenly pouring warm water from a watering can on the surface of the slide. In this case, small depressions may occur, which will have to be slightly patched up with snow and leveled with a spatula.

Parents who know how to make a children's ice slide correctly never build it without curbs. This allows you to increase the safety of the structure and leave the kids alone with entertainment, without fear for their health.

The secrets of creating a track

Having familiarized yourself with the basic recommendations on how to make a slide out of snow, you can proceed to study the technology for creating an ice track. First you need to carefully tamp snowballs, forming a smooth, dense surface of the future descent. You can compact the surface with your feet, a shovel, a small log, or with any other means at hand.

The angle of descent should be done, focusing on the age of the kids. For children under the age of 3 years, the angle of the inclined track should be no more than 30 degrees. Parents who want to learn how to make a snow slide for older children should be advised to make the slide steeper, otherwise the fun can quickly get boring for the kids.

Preparation of the base ice layer

The first layer of ice is the most important beginning when building a snow slide. His correct formation becomes the key to creating ergonomically thought-out descents, verified inclinations and turns.

It is convenient to create a base ice layer using a regular home spray bottle for spraying plants. The water in the spray bottle should be warm. Otherwise, the slope will freeze too quickly, resulting in uneven sections. The first layer of ice crust should freeze for at least an hour.

How to make a hill of snow with your own hands? Filling with water

It is convenient to pour the main layer of water to form a full-fledged ice descent using a small bucket, or better than a regular one. The water in the container should, again, be warm, this will make the surface of the descent smoother. However, you need to try not to overdo it, because when pouring a slide, you can frankly put all your efforts in vain.

In order for the surface of the descent to be finally seized by a strong ice crust, children should not be allowed to descend until the next morning. For the final fixing of the surface, it is necessary to throw several buckets of water onto the slope of the structure early in the morning.

Eventually

How to make a snow slide for a child? When performing such a task, the main thing is to have a reserve of strength and time sufficient to form a full-fledged snow mountain.

In order not to fly off the hill, it is better to make the descent in the form of a groove with strong, high curbs. Similarly to the descent, the surface of the curbs must be evenly doused with water from a watering can, bucket or hose.

Having found out how to build a snow slide, you will probably want to make such a structure in the yard. If you also involve others in this process - parents and children, then you can turn the construction of the slide into a rather exciting event. As soon as the slide is completed, you can safely convene the neighboring children from all over the area, who will happily test the structure for strength.

Usually filling a small snow hill on their own, even without outside help, is not difficult. Depending on the number of participants in the event, work can take from several hours to several days. However, the hard work will not go unnoticed. Until spring, children will be able to have fun and spend time in the company of their peers without leaving their own yard.

Winter is coming and for our children we need to prepare a winter ice slide. In this article I would like to help you with the answer to the question "How to make a slide with your own hands?",

Naturally, to build a slide, you need a lot of snow and frosty weather. Then, you need to choose a convenient and safe place to create a slide. It should "grow up", away from the roadway and, preferably, not rest against the sides of the entrance door and all kinds of buildings.

It is best to make a hill with a friendly company, one carries snow, another works with a shovel, the third rams the applied snowdrifts.

First you need a large wide shovel. The next step is to apply snow, the more the better. It is worth deciding for whom the slide is being built. If for small children, then it should not be too high. And the width of the slide, as they say, is done "to taste" - from one to two meters. Well, you can not save on the length of this snow creation - all five meters! If, of course, the free space around the slide allows the "builders" to swing like that.

How to make a children's slide without steps? No way, because the steps are necessary for the slide. They are made from its highest side. As for the sides, you should not particularly focus on them, since they can be made later, when the slide is filled with water.

1. So, the main part of the construction of the slide is completed, now the most important part is pouring. The hill is poured cold water from a hose, but you can actively use watering cans and buckets. Only the steps do not need to be poured, otherwise you will not be able to climb up the hill later on them.

2. How to make a snow slide so that it is smooth and slippery? It is necessary not to be too lazy and fill it in at least three times. In order for the slide to be thoroughly frozen, without unnecessary tubercles and dents, it must be constantly trimmed and smoothed with a wide shovel.

3. It is recommended to fill the hill in the evening. At night it will freeze, and in the morning the kids will have fun riding with it. You can ride on ordinary cardboard, so to speak, in the old fashioned way, or use modern ice sleds for greater speed.

4. The most convenient time to make a slide is in the thaw, when the snow is heavy and sticky. The snow "mound" you made will need to be trampled down and left for a while so that it settles and compacts to a denser mass. The height of the slide will depend on what age children will ride on it - for kids no more than a meter, for older children - 1.5-2 meters in height. The surface of the descent must be flat, the curbs must be made high enough. Pay attention to the angle of descent - if it is more than 40 degrees, the slide will become traumatic.

5. It is necessary to fill the hill in frosty weather. Just pouring it from a bucket and a hose is a bad idea, a large mass of water, especially under pressure, will simply wash the snow, forming holes. A laborious, but win-win option is an ordinary garden watering can. You can pour water on a flat surface from which it will drain onto the snow - on a piece of plywood or a wide shovel. Sometimes it is recommended to cover the hill with a large rag and pour it through it - the water will be more evenly distributed over the snow. If you don’t have anything like this at hand, collect snow from the nearest snowdrift in a bucket of water, mix with a stick and evenly cover the hill with the resulting snow slurry. Level the surface and leave the hill for the night to freeze, and the next day coat it with snow porridge again and let it freeze completely. From the descent, you can make an ice path with water or the same snow porridge so that the skiers drive further away.

The surface of the descent will need to be kept in order, making sure that potholes do not form on it.

You also need to make steps, make them 10-15 centimeters in height.

There is no natural slope in our dacha next to the house. So every winter New Year holidays we are building an ice slide, as they say - from scratch. This is not so difficult, but the pleasure from the result is enormous. Not only children ride, but all adults.

Only this year we learned that not everyone knows how to build and fill the hill. In other words, they are just lazy. Most often, people are looking for a natural slope that can be “rolled out”. And even then, if only the children ask. How long have you yourself, adults, been riding with ice mountain? You say the age is not the same? And you leave all the stereotypes imposed by society and just try! Here is a real adult winter therapy from bad mood and blues!

Let's start building. Progress.

However, back to the main point. Construction begins from the very slope, which, in our case, is not nearby. If you are in the same situation, then you will have to work a little with a shovel. The right weather, in this case, will greatly facilitate the matter. The correct one is when the snow is sticky and heavy. Take some snow in your hand and squeeze it into a ball. Sticky? This means that it will be much easier to form a slope and build steps for a future slide.

So, we pour an “artificial” mountain, the higher the better (keep in mind that later the hill will pretty much settle down). We trample down, crush, again we pour snow on top. To crush loose snow in frost will help cold water. The main thing is not to overdo it with it (use a watering can with a spray nozzle).

Then we proceed to the formation of steps and a slope. Try to keep the slope level. Be sure to take care of the sides along its edges so as not to fly off the hill to the side. On the top of the hill there should be a large enough flat area so that even a large person can easily accommodate, without fear to move somewhere to the side or back even before descending from the mountain. The snow on the slope, top and steps should be dense, thoroughly compress it.

Look at the result. Beauty, isn't it? It remains to make our hill ice.

Fill.
It is better to start pouring the next day or one day after formation. The weather we need for this is immediately before a severe frost or already at its onset.

We collect water in a watering can with a spray nozzle and begin to gently and evenly water the slope. The amount of water depends on how big your slide turned out to be, and how long the slope is.

Fill in the horizontal continuation of the slide (it should also be with sides). Smooth out irregularities immediately, until the wet snow seizes and turns into ice.