How I got cancer. Rami Blekt Intro to number four...
![Rami Blekt - Teacher and consultant in ancient Indian astrology and oriental psychology Release from negative emotions](https://i0.wp.com/bleckt.com/wp-content/uploads/2011/02/DSC05115_thumb.jpg)
According to the instructions, "Signal-20P SMD" was developed and put into operation for operation in fire, alarm and security alarm systems. The control fire and security device can be equipped with 20 communication lines in the system. The composition includes all types of fire and security equipment for detecting and informing about the occurrence of fires or violations of the protected perimeter.
In the description of the instruction "Signal-20P SMD" the device is listed as a device with control and reception functions in security and fire system. It has technological capabilities to control up to 20 areas. It receives information from warning devices that have automatic, manual or active mode. It has control over sound and light technical means of detecting and generating a fire signal. Functioning in the RS-485 software shell, it receives commands and issues information to the network controller. Such control points, according to the instructions of "Signal-20P SMD", can be control panels of the S2000 modification or a personal computer with Orion-type software installed on it.
The device broadcasts alerts "fire" and "malfunction" to the fire station control panel. receives alarm notifications from this device. Interacts with Touch Memory electronic identifiers.
According to the instructions of "Signal-20P SMD", the appointment control device consists in subordinating to its functionality the processes of arming and disarming single alarm loops. Also, the device can perform these tasks with a group of loops, it depends on the orders of the network controller.
"Signal-20P SMD" monitors breaks and short circuits on lines to which signal annunciators are connected. The device provides connection of an alternative power supply to the auxiliary input. Passes the electronic ID cipher to the network controller for organized partition management. All the necessary information according to the state of the partition is displayed on an external indicator built into the device (according to the instructions "Signal-20P SMD").
The operation of the device is defined as addressable and only in a joint group with the Orion security system.
The device "Signal-20P SMD" is designed to protect premises and structures from fires and unauthorized access. Such objects most often become various offices of enterprises and companies, retail buildings, banking institutions, warehouses, residential buildings and similar covered building construction.
The instruction manual for "Signal-20P SMD" recommends taking care of the device and puts forward a number of requirements for working with it.
The device must only be installed inside buildings. closed type with no heating. The power supply is specially reserved for uninterrupted operation, or there must be two of them - the main and the alternative. Required voltage varies from 10 to 28 V. It is recommended to use power supplies model range"Rip" company "Bolid". It is strictly not recommended by the manufacturer to use the Signal-20P SMD device in dusty rooms, in explosive environments and in conditions where negative environmental factors can affect the device.
Proper performance is ensured by the device in conditions at an ambient temperature of -30 ℃ to +50 ℃, air humidity should not exceed 98% at +25 ℃. Vibration pressure should be in the range from 1 to 35 Hz. If the electromagnetic environment is not suitable, the quality of the operating functions is not guaranteed by the manufacturer.
According to the instructions, "Signal-20P SMD" can process the information volume of 20 signal loops. Serves up to five switched circuits, the number of control circuit inputs is 26. This number includes 20 fire alarm loops, an electronic identifier circuit, two circuits of the RS-485 interface shell, controlled output circuits of two relays and inputs electrical supply devices.
"Signal-20P SMD" has 7 outlets. They are defined as 3 relay outputs for switching with a voltage of 28 V and a current of up to 2 A, 2 control outputs for connection technical means fire detection and signaling, two outputs that control an external indicator for scanning an electronic ID.
The device notifies about such events as:
Description: Control and reception device (addressable loop expander) security and fire Signal-20P SMD, 20 loops, plastic housing.
Article: Signal-20P
Application area:
Key Features:
Specifications:
Parameter | Meaning |
Signal-20P SMD |
|
Number of alarm loops | 20 |
Number of control programs for each output | 37 |
Internal buffer capacity | 64 events |
Supply voltage | 10.2 to 28 V |
The current consumed by the device, in standby mode: | |
- with 24 V supply: | 200 mA to 400 mA |
- with 12 V supply: | 300 mA to 600 mA |
Loop load current | 3 mA |
Control of 5 outputs (output control logic is programmable): | |
- three relay outputs of the "dry contact" type for switching: | with maximum voltage up to 28 V and current up to 2 A or up to 80 V and current from 0.1 mA to 50 mA (outputs "relay 1", "relay 2", "relay 3") |
-two outputs with control of the health of the circuits for connecting annunciators: | with maximum voltage up to 28 V and current up to 0.5 A (outputs "relay 4", "relay 5") |
Working temperature range | -30 to +55°С |
dimensions | 230 x 135 x 43 mm |
The Signal-20P device is available in two types of cases: metal and plastic. Programming and control is carried out by the S2000 remote control or from a computer using a specialized software. Signal-20P can be used both in stand-alone mode and as part of the Orion AWS. The device can be powered by 12V or 24V voltage sources. The main and backup power supply can be used, and the failure of the power supply line of one of the sources ( short circuit or break) does not affect the operation of another. Signal-20P has a programmable control logic for five relays, which allows you to have 37 control programs for each output.
Application area:
Key Features:
The difference between "Signal-20P" and "Signal-20P version 01" is in the material and size of the case.
Designed for use as part of ISO "Orion" for control various types security and fire conventional detectors, contactors and signaling devices with normally closed or normally open contacts and relay control of external actuators.
Description:
Specifications:
PARAMETER NAME |
PARAMETER VALUE |
|
Number of radial conventional signaling loops (AL) |
||
Max. AL wire resistance without taking into account the termination resistance |
1 kOhm for security loops |
|
Permissible leakage resistance between loop wires or each wire and ground |
20 kOhm for security loops |
|
Devices connected to the loop |
Conventional security and fire detectors with relay output |
With no restrictions |
Non-address security detectors powered by AL |
with total current consumption up to 3 mA |
|
Non-address fire detectors powered by AL |
with a total current consumption of up to 3 mA (with a total current consumption of up to 1.2 mA with simultaneous activation of heat and smoke detectors) |
|
Voltage at each AL input |
19 V ÷ 24 V with the installation of a terminating resistor 4.7 kOhm ± 5% and the current consumption of the detectors 0 ÷ 3 mA, |
|
Current limitation in a short-circuited loop |
26.5 mA (no more than 20 mA through a triggered detector, when the detector voltage is more than 6.8 V) |
|
Light indication |
1 mode display indicator |
|
Built-in buzzer |
||
Tamper sensor |
microcontact |
|
Non-volatile event buffer |
4096 messages |
|
Interface |
RS-485, protocol "Orion", "Orion 2.1" |
|
Unit power |
from an external source direct current |
|
Supply voltage |
10.2 ÷ 28.0 V DC |
|
Number of power inputs |
||
Current consumption |
in standby mode (depends on the number of current-consuming detectors in the loop) |
200 - 300 mA at 24 V supply voltage |
in fire mode |
330 mA at 24 V supply voltage |
|
Ready for operation after power on |
no more than 3 s |
|
External reader of electronic identifiers (EI) |
||
Connected reader interface |
Dallas Touch Memory, iButton |
|
Reader LED control |
Two LEDs (green and red). Control signal "+5V CMOS" with current limitation with direct connection of LEDs at the level of 10 mA |
|
Reader buzzer control |
||
Electromagnetic relays (dry contact) |
3 pcs.: |
|
Electromagnetic relays |
2 pcs.: |
|
Working temperature range |
-30 to +50 °C |
|
Relative Humidity |
up to 98% at +25 °C |
|
Case protection degree |
||
Housing material |
"Signal-20P version 01" |
|
"Signal-20P" |
||
dimensions |
"Signal-20P version 01" |
229x136x41 mm |
"Signal-20P" |
||
Block weight |
"Signal-20P version 01" |
no more than 0.8 kg |
The activity of our video surveillance online store covers the entire range of security and protection equipment, which includes: and much moreCarrying out deliveries throughout Russia, our company delivers goods even to the most remote regions of the country. We try to satisfy the most demanding customer. Active-SB specialists understand the specifics of security and video surveillance systems not only in Moscow, but also in remote regions with complex climatic conditions. Our employees will offer you the most suitable options both in terms of functionality and cost, tell you about their capabilities and justify the need to use certain technical systems. Our clients are commercial organizations and end users, installation companies and state enterprises. More than 50,000 registered users of the corporate website have access to a constantly updated database technical documentation, certificates for modern systems security, as well as participate in the affiliate program and special promotions held by the company. For the convenience of our relationship with customers, we cooperate with installation organizations that are ready to install video surveillance systems of any complexity and will always come to your aid. Therefore, if necessary, you can not only purchase equipment from us, but also, for example, order the installation of video surveillance systems or conduct Maintenance other security systems. The work of our hypermarket of security systems is based on the principles of honesty, openness and decency. We look to the future with confidence, strive to develop and improve every day. Signal-20P SMD control of 20 loops, the ability to program the parameters of each loop for operation in the security or fire alarm, fixation of alarms in each loop of one and two fire detectors, fire extinguishing control outputs, control from built-in switches or via RS-485 interface from the S2000 remote control or PC. Buying Signal-20P SMD in a specialized Jet-Video Company, you can order fast free delivery of high-quality licensed equipment at affordable prices. Key Features Signal-20P SMD:
You can be sure of the quality Signal-20P SMD. All equipment stocked by Jet-Video is covered by a manufacturer's warranty. We are glad that you contacted us to buy Signal-20P SMD We will try to make the selling process as pleasant as possible! Specifications Signal-20P SMD:
We recommend reading |