The better to glue the foam rubber together. How to glue the foam rubber? Testing and selection of glue for foam rubber

Foam rubber has been one of the most frequently used materials in many fields of activity for many years. Low cost and excellent characteristics make it possible to use this material in furniture production, as a filler for beds, mattresses and other items.

In addition to furniture, foam rubber can be found in soft toys, driver's seats, it is often used for interior decoration in order to get excellent. Foam rubber is incredibly common, so the list goes on for a long time.

Material composition and properties

The composition of this material is 100%, it has cells filled with air, but due to the fact that the cells with air are small in size, the foam rubber passes air well. It is also worth noting that this material does not lend itself and does not lose elasticity at temperatures from -40 to +90 degrees Celsius. It is interesting to know that this material received its current name due to the name of the Norwegian company "Porolon", which, back in the days of the USSR, supplied this material in demand to our territory.

But in addition to the positive properties, foam rubber has some main disadvantages, namely:

• Short service life. Foam rubber is not able to serve for many years, since over time it loses its original elasticity, it can begin to stick together and crumble. That is, it becomes completely unusable;
• Light up easily. Foam rubber is dangerous in terms of combustion, it easily ignites and during this process it releases poisonous and toxic substances.

In many cases, there is a need to attach the foam rubber to the surface, it can be a solid or liquid object, and sometimes you need to glue the foam rubber to the foam rubber, and at such moments you need to know what kind of glue is needed in order for the gluing to occur as efficiently as possible. Therefore, further from the article, you will learn the types of adhesives that will help solve this problem, and also learn how to glue the foam rubber together.

The correct choice of glue is the key to successful gluing of foam rubber and any other material, and this is a rather difficult task, but absolutely solvable. We would like to inform you right away that the use of glue with hazardous toxic substances (toluene and trichloroethane) is not recommended. The use of such adhesives may result in Negative consequences for your health, which will in no way justify the quality of adhesion, since the result from such products is not the best.

For gluing the foam rubber, do not use adhesives that contain substances that can corrode the foam rubber. In addition, it is not recommended to use liquid formulations, because they can clog the porous structure of the foam rubber, which will disrupt its properties.

For this material, special adhesives have been created that should be used. By visiting the market, you will find a large number of such adhesives, and you can choose exactly the one you need.

Basically, special adhesives for foam rubber are divided into two types, namely:

1. Professional. Such adhesives are mainly aimed at the production of furniture and their cost is quite high.
2. For mass use. Affordable adhesives with affordable prices, anyone can buy glue of this type.

When choosing an adhesive, be sure to pay attention to the following:

• Dry residue. This is an indicator that will tell you how quickly the glue hardens. The more dry residue, the faster the glue hardens (the ratio of dry mass to liquid mass of the substance);
• Elasticity. Paying attention to this indicator, you can find out that if the viscosity of the glue is from 100s or more, an elastic and seemingly attractive seam is formed at the adhesion site;
• Coupling speed. Adhesive for foam rubber should adhere to the surface within 2 minutes after it has been applied;
• Package. A convenient form of packaging for work is a balloon. Glue in the form of a spray is easy to apply not only on flat surfaces, but also in hard-to-reach places, and such glue is not able to clog the pores of the foam rubber and sets quickly enough;
• The color of the glue. Choose a glue that matches the color of the surface and the material you are gluing as much as possible, otherwise the seam will attract too much attention.

Knowing what to turn to Special attention when choosing an adhesive composition, it is best to opt for those adhesives that include styrene butadiene, polyurethane, neoprene, thanks to this basis, the process of gluing foam rubber with almost any surfaces will be quick and problem-free.

If you turn to someone from the experts in this field for help in choosing an adhesive composition, almost anyone will be advised to choose the glue for foam rubber, the company of which is well-known and time-tested.

It is popular with consumers and has no solvent. Also, this glue is not flammable, and during gluing, a quick, even and sufficiently strong seam is obtained.

"BF-6"

And if you still do not know how to glue the foam rubber together, then experts recommend BF-6 glue. It copes well with this task, and is distinguished by absolute safety and ease of application.

But there are some peculiarities during gluing, namely:

1. Before gluing, the surfaces must be moistened;
2. BF-6 glue must be applied twice, the first layer is applied thinly and time is given for it to dry, after which the second layer of glue is applied;
3. After the glue is dry, after wet cloth it is necessary to iron the seam with an iron.

"Glue 88"

The next type that can be used for gluing foam rubber is glue 88 (also called "shoe"). This type contains rubbers. This glue is immediately ready to use, that is, you do not need to spend time preparing it, it is enough to apply a small layer on the materials to be glued. He also possesses positive qualities, namely, that the seam resulting from gluing is resistant to the effects of low temperatures, as well as the fact that the glue works with a large list of surfaces.

Glue "SABA"

The next option you can use. This is an aerosol adhesive spray in a spray can, with a gun through which the actual application takes place.

SABA has certain advantages:

1. The composition is not flammable;
2. Absolutely does not harm human health;
3. High adhesion of the materials to be glued;
4. Can be used for gluing objects at home and in production.

"Foam rubber 2"

The question of how to glue the foam rubber together can be solved with the help of the foam rubber component 2. It is often used in furniture manufacturing enterprises. In addition to gluing foam rubber to foam rubber, this composition can cope with fabric, leather, chipboard, fiberboard, wood, metal, cardboard, rubber, and many other surfaces.

When using the glue Foam rubber 2, you first need to clean, degrease and dry the surfaces to be glued. This procedure guarantees adhesion best quality, reliability and durability of the seam.

The composition of "Olimpur"

The last in the list of special foam adhesives we are considering is Olimpur. Glue on water based and gluing takes place through spot application. The composition can glue foam rubber to any building material, whether it is drywall, or whether it is plaster or putty, etc. By the way, you can read the material.

Alternatives and their testing

In addition to the above adhesives, there are less worthy alternatives that can also be used for gluing foam rubber. Therefore, we decided to consider and immediately test several of the main available alternative foam glue options.

"Titanium"

The first option is Titan glue, intended for ceiling tiles made of polystyrene (average price - 100-130 rubles per 0.5 liter).

This glue can be used, but it is worth remembering the drawbacks, namely that after application a tough, tangible seam is formed, and it takes a long time to harden, about a day.

"Crystal moment"

Next affordable option- glue "Crystal Moment" (approximate price 130-140 rubles for 125 ml.).

Having studied the instructions for use, you can see that foam rubber is also included in the list of materials to be glued, but after use, we can confidently say that this is not best view for of this material... When gluing foam rubber to a hard surface, you can get a mediocre result, and in some places it does not stick at all. But for gluing foam rubber with foam rubber, this glue is suitable.

"PVA"

The next thing you can use is (the price is about 140 rubles for 250 g).

Is not the best option for gluing foam rubber to the surface, as it requires additional attention, for example, fixing with tape during gluing with uneven surface, as well as long time drying (24 hours).

"Double sided tape"

How to properly glue foam rubber products?

After the necessary glue has been selected, you can begin the procedure for gluing the foam rubber to the surface. But take your time, because in order for the gluing to be of high quality, you need to know about some of the features of this process, and which ones, read on.

Features of the process of gluing foam products:

1. For maximum adhesion, do not forget to clean the surfaces. It is necessary to remove all dirt and dust, and then degrease with special means, for example, white alcohol, and dry everything thoroughly.
2. The air temperature during bonding of materials should be room temperature. This is necessary so that the composition does not thicken, since you will have to spend many times more glue, and the quality of the seam will also deteriorate.
3. Before the process, be sure to read the instructions for use and do everything as written. Apply adhesive with a brush, roller or spray from a can. But applying the glue with a gun is the most economical.
4. In most cases, the adhesive composition after application should wait a while, and you will learn this time from the instructions, but most often it is from 1-2 minutes to 2-3 hours. After the necessary time has been waited, the gluing parts must be pressed together in order to form a seam.

Video: how to glue the foam to the foam

Foam rubber - popular finishing material, in demand in many industries. It is used in the manufacture upholstered furniture and packaging, for warming and soundproofing the premises, when decorating car interiors. The porous structure of this material creates some bonding difficulties that can be avoided if you use a specialized foam glue and follow the sequence of work exactly.

Adhesive composition

Regardless of the nature of the work, whether it is gluing foam sheets together or gluing to wood, plywood, plastic, metal, the adhesive must provide a reliable durable connection.

For cellular polyurethane foam, contact adhesives containing synthetic rubber and solvent have been specially developed. Products with neoprene, polyurethane or styrene-butadiene base are optimal for working with this material. Many manufacturers add components to the product composition that increase adhesion and improve other properties of the adhesive.

In addition, foam glue can be water-based. Such a composition is safe, odorless and does not emit toxic elements, since it does not contain volatile substances in the form of a solvent, therefore it is often used in the manufacture of furniture. It can be one-component or two-component, it is highly economical.

Adhesive requirements

Answering the question of how to glue the foam rubber, professionals say that toluene and its analogues should not be present in the adhesive. This toxic substance, successfully used in the manufacture of other adhesives, is absolutely not suitable for gluing porous polyurethane foam.

But besides safety, there are other requirements for foam glue.

• When choosing a glue, you need to pay attention to its consistency. The adhesive must be thick and viscous. A very liquid adhesive will quickly be absorbed into the porous surface and will not be able to create a strong bond.
• The time interval between the application of glue to the surface and the beginning of gluing the coatings (gumming time) should be at least two minutes. This is very important when joining surfaces with large areas.
• The color of the composition is important. It is better if it does not differ much from the color of the cellular polyurethane foam, then the seam will turn out to be neat and almost invisible.
• It is more convenient to use a spray for bonding large surfaces. The aerosol is easily sprayed over the surface, allowing you to deliver the product to the most difficult to reach places. The structure of the spray is selected in such a way that the adhesive does not penetrate deep into the pores of the material, but remains on its surface, forming a thin film. Usually a standard cylinder is enough for 5 square meters. m of surface.
• When deciding what kind of glue to glue the foam rubber, you need to inquire about the percentage of dry residue. The higher the percentage, the less shrinkage of the glue and the better all other characteristics. In two-component polyurethane compounds The dry solids content is 100%, therefore such adhesives are ideal for bonding cellular material.

Forms of release and brands

There are several compounds that allow you to create a strong and durable connection of foam rubber sheets to each other or to any other material. The most popular and demanded buyers are the following.

• Rapid-100. The Rapid-100 adhesive does not contain flammable solvents, therefore it does not ignite and does not emit toxic substances. Allows you to create an elastic seam that is very tear-resistant. It is used in the furniture industry to connect pieces of foam rubber together.
• "88". Foam glue "88" is convenient to use, as it is sold in finished form... Provides a reliable elastic connection that is resistant to low temperatures. It is used for the manufacture of furniture and in other works when it is necessary to glue the pieces large sizes or combine foam rubber and fabric.
• Olimpur. Olimpur aerosol adhesive is water-based. The composition does not exude unpleasant odor and sets quickly. With this tool, you can stick the foam rubber to plywood, drywall or plastered surfaces.
• Saba. The glue of this brand is produced in cylinders; to use it, you need to purchase a special gun. The composition is resistant to high temperatures, long period hardening, high adhesion.
• "Foam rubber-2". A very popular furniture glue that allows you to glue pieces of polyurethane foam both together and with other materials, in particular wood, plastic, metal, fabric, leather. The adhesive is based on synthetic rubber.

Self-adhesive foam rubber is used in the production of hats and interior items. It is a tape, one side of which is covered with an adhesive.

How to use glue?

When gluing foam rubber, the adhesive is applied to both surfaces using a brush, roller or a special glue gun. In the latter case, the consumption of glue is significantly reduced and is only 70 g per square meter.

Foam rubber should be glued at an air temperature of at least 15 ° C, and the surfaces must first be cleaned of grease and dirt.

For each glue, the manufacturer encloses instructions that indicate the features of the use of a particular composition. But basically the rules for working with glue for foam rubber are the same.

1. After cleaning the glued surfaces from dust and small debris, glue for foam rubber is applied to them so that a 3-5 mm thick film is formed.
2. Leave to dry for 10 minutes.
3. Apply a second layer and wait 3 minutes, after which the surfaces are connected and pressed against each other.

Working with means "88" or "BF-6", before applying the first adhesive layer, the surfaces of the materials are moistened with water.

How to glue foam rubber to plywood with your own hands?

For gluing cellular polyurethane foam to wood or plywood, it is better to use a glue gun, which will accurately and economically spray the composition where it is needed.

The first step is to cut out the parts and refuel the pistol. Glue is applied to the surface of both foam rubber and plywood. Wait for the time specified in the instructions, connect the parts and squeeze tightly together. If necessary, the future product can be put under the press. If everything is done correctly, you will get a strong elastic seam.

Do not allow glue particles to get on mucous membranes and in the respiratory system, as well as work near a source of open fire.

The latest technologies allow the development of highly effective adhesives that allow you to create reliable and durable adhesion of foam rubber to various materials... The main thing is to heed the advice of experts and choose high-quality glue.

Why do people have a question: how to glue foam rubber to a tree?

In most cases, it is asked by people who have already tried to glue the foam rubber with their usual glue, but the seam came out too rough and untidy, or the whole structure fell apart in the first few hours.

The fact is that gluing foam rubber is a very delicate process, since this building material is not like the others: it is porous and filled with air.

These properties allow it to easily absorb glue. Therefore, there are problems with attaching foam rubber to a tree, and finding a glue suitable for this procedure is a real success.

Foam rubber is called elastic polyurethane foam (gas-filled plastic).

This name was attached to the substance due to the fact that in Soviet time it was delivered to the country mainly by the Scandinavian Porolon factory, in honor of which the building was named.

Now foam rubber is a light foam, 90% of the mass of which is ordinary air.

But, nevertheless, the material is very useful in construction.

It is used for:

• insulation and soundproofing (due to its air and soundproofing)
• packing some valuable items
• giving elasticity to products
• stuffing furniture
• production of sponges and other goods

Also, foam rubber is used in the production of headphones for cushioning and as a softening or support material when creating all kinds of products. This is why it is so useful in.

How to choose a glue for gluing foam rubber to wood

The problem of attaching foam rubber to a tree is relevant for any person who decides to try his hand at self-production any products, since it is difficult to do without a combination of these two materials in production.

Meanwhile, choosing what to glue the foam rubber to a tree at home is not too easy.

After all, the glue, due to the structure of the material, must have a number of the following characteristics:

• Its composition should not include corrosive components (trichloroethane, for example), because otherwise you can not talk about quality at all.
• In no case should the glue be too liquid, because then the foam will simply absorb it into itself, and the seams will turn out to be hard and uneven. The ideal viscosity of the adhesive should be greater than 100s. Then the seams will be thin, even and aesthetic in appearance, while the glue will go away much less.
• If possible, select the glue that matches the color of the product so that the seams fit into the overall design as organically as possible.
• Choose an adhesive that cures long enough. Ideally, 2-3 minutes, because in order to gently glue the foam rubber to the part, you need to devote some time to the process.

Currently, many compounds have been developed that can be used to glue foam rubber to wood. PVA, for example.

This company, familiar to all of us from the lessons of labor in elementary school, actually produces many varieties of glue, including furniture, which is ideal for gluing foam rubber to wood.

Also optimal for this work is "Foam rubber 2".

As the name implies, this glue was invented specifically for creating products with foam rubber and all the subtleties of this work were taken into account in its development.

The procedure for gluing foam rubber with wood

For gluing foam rubber with it is better to use a glue gun. This tool makes it possible to apply neater strips of glue only in the right places, which is much more practical than working with a brush. Let's get started:

• First you need to prepare materials for work: cut out all the details required sizes... If a glue gun is available, refuel it.
• Next, you should apply glue to the product and wait for the time indicated on its packaging.
• After the required time has passed, combine the parts with each other and press them.

If the glue for the foam rubber is selected correctly, and done carefully, the result should be a high-quality and beautiful product with elastic seams. That's all the secrets.

You can watch the video on how to replace the foam rubber in the sofa:

Do-it-yourself repair of upholstered furniture is quite possible if you know the basic rules of work and purchase high-quality consumables.

For example, for pasting surfaces with foam rubber, you need a special furniture glue that will securely fix the material on the wood base. Foam glue can be different - there are many brands.

General requirements for adhesives for foam rubber

In furniture production, foam rubber (flexible polyurethane foam) is a necessary, widely demanded material. Easy to cut, not crumble, cheap. But choosing a good foam glue is not so easy: many adhesives spoil the structure or are quickly absorbed and have a huge consumption.

What glue is better to use for gluing foam rubber? The tool must meet the following requirements:

• sufficient viscosity, good elasticity - if the glue is thick, homogeneous, the seam will turn out to be strong, flexible, and with a liquid texture, the glue will flow;
• suitable shade - to appearance the furniture was not damaged, you should select a glue of a shade suitable for the color of the foam;
• soon-drying structure - the glue must set quickly, the process takes no more than a few minutes, but during this period you can manage to move the base if there are flaws;
• one-component composition - high-quality glue is sold ready-made, its components do not need to be mixed together.

After evaluating the composition, it is important to make sure that there is no trichloroethane in the glue - this substance is harmful to humans and spoils the foam rubber. Good remedy contains rubber, water, solvents, and a number of other targeted additives. You can use materials based on polyurethane, neoprene, styrene-butadiene.

With the help of high-quality glue, foam rubber can be glued not only to wood: the composition is securely attached to plastic, to metal. Most products are suitable for woodworking and shoe repairs.

Adhesive brands for different surfaces

How to glue foam rubber parts to furniture surfaces? It is not worth saving and purchasing the cheapest formulations, although many of them are quite reasonable in price. The most modern adhesives are water-based or water-dispersible: they are environmentally friendly and harmless to people and the environment.

88-P2

The material was originally developed for furniture production, the second name is Foam-2 glue, the most popular. The tool is suitable for gluing together foam parts or gluing them to a base made of different materials - chipboard, fabric, primed metal, cardboard, leather, rubber. The limitation is imposed only on bases made of polymers containing plasticizers.

A distinctive property of 88-P2 glue is the ability to form a highly elastic, strong seam, resistant to moisture. The product retains its stickiness for a sufficient time, during which it is possible to have time to correct all defects.

With the material, you can easily glue even large parts, paste over the seats and backs of furniture. The adhesive is ready to use, does not contain harmful solvents. It contains polychloroprene rubber, adhesive resin, modifiers, ethyl acetate and gasoline.

The main characteristics of the composition:

• complete drying and readiness for use of furniture - 24 hours;
• color - yellow, light brown;
• viscosity according to VZ-246 with a nozzle of 4 mm - 90 s;
• density - 0.86 g / cu. cm.

88-H

Furniture is used less often, since it is rarely found on sale. Good for gluing foam to wood, plywood, plastic and metal.

The tool can also be used for other purposes - it is easy for them to glue vulcanizing rubber to iron, wood, leather, glass, it is allowed to use it to attach plastic to a concrete wall.

Sintex

Sintex glue (Sintex) is widely used in the production of furniture, mattresses. Glue is produced in a balloon, cans, tubes of various sizes, including industrial containers. Designed for strong adhesion of foam rubber to textiles, wood, metal, the main composition is represented by synthetic rubbers and solvents.

Material properties and specifications:

• high elasticity, heat resistance;
• easy application, creating a thin seam;
• gluing strength;
• density - 1.17 g / cu. cm;
• viscosity according to VZ-246 with a 6 mm nozzle - 20 seconds;
• primary gluing - 5 - 15 seconds.

The product has a drawback: the composition is flammable, it must be used with great care at home.

Sefox

Sefox glue - aerosol glue for foam rubber and a number of other materials. Spray is not the only form of release; for furniture production, the product is produced in large-volume cans. Sefox-1111 glue consists of synthetic rubbers, solvent is used as a solvent.

The main characteristics of the tool:

• application - using a spray gun with a nozzle of 1.8 mm, operating pressure - 3 - 6 bar;
• number of layers - one;
• initial drying time - 3 minutes.

Sefox is well suited for pasting furniture with felt, foam rubber, fabric, can glue different materials between themselves (plastic and metal, foam and plastic, etc.). The aerosol makes the application convenient, but this form of release can greatly increase the cost of work.

Saba

The product is produced in spray cans. For application, you must purchase a special glue gun. The glue is great for home use.

Properties:

• low fire hazard, incombustibility;
• no environmental hazard;
• resistance to frost and high temperatures;
• high seam strength.

BF-6

Can I use BF-6 glue for foam rubber? This is an alcoholic medical composition, but a product with a similar name BF is quite suitable for furniture production and repair.

BF glue is used by the method of hot and cold gluing, it can reliably fix any details in a sofa or other upholstered furniture. It is easy to apply, the glue has a low consumption, and is safe to use.

The peculiarity of the composition is the need to wet the products before pasting and apply the product in two layers (very thin and thicker).

Olimpur

The material is used for application to walls, furniture and other surfaces. It helps to glue the damaged spots, to fasten plywood, drywall, fabrics, foam rubber together, therefore it is considered universal. A point application of the product is enough to create a strong adhesion of the parts.

Rapid-100

Among large selection furniture adhesives, Rapid-100 should be noted. Its purpose is indicated in the instructions as follows: for ordinary and acoustic foam rubber (soundproof material), polyurethane foam, padding polyester, fabrics, leather, wood, paper. The tool can be used as a material for gluing coconut fiber, felt, therefore it is used in the production of mattresses.

Rapid-100 is a non-combustible glue based on styrene-butadiene rubbers. For spraying, you need a gun - the product is sold in cylinders. The smell of the product is weak, the composition sets quickly, gives an elastic strong seam. The parts can finally be glued in 4 - 8 hours.

Tapicer

The tool is made on the basis of a special SBS rubber, contains synthetic resins, modifiers. You can glue felt, satin, polyurethane, polyester, rubber, carpets, foam rubber, and other materials. The latter are easily glued to wood, concrete, metal. The tool is widely used in production, but no less often it is purchased for domestic conditions.

Specifications:

• density - 0.85 g / cu. cm;
• color - red;
• initial drying time - 1 - 2 minutes.

AOS-TAP

AOS-TAP glue is suitable for different areas applications, including furniture production. Suitable for upholstering car seats. With the help of glue, foam rubber is glued to wood, fabric, but it cannot be used to connect foam rubber and plastic.

The base of the product is made of rubber, artificial resins, color red. It dries up in 5 - 7 minutes, finally the products are glued together in 12 hours.

PVA

Is it possible to use the well-known PVA for foam rubber? If desired, using the product, it is permissible to glue foam rubber with wood or fabric, but the reliability of the seam leaves doubts.

It will take a long time to wait for complete drying and press the bases (up to a day). It is necessary to fix the surfaces with pieces of tape, which is not very convenient. It is better to buy more reliable formulations and not experiment with the quality of finished products.

Foam rubber bonding technology

Bonding porous materials requires some knowledge. Before work, you must do the following:

1. Trim the edges of the foam carefully so that they are perfectly straight (using a sharp knife).
2. Dry the surface, exclude the presence of any contamination.

The glue is applied, depending on its packaging, with a brush, roller, or from a pistol. The consumption rates of the funds are always prescribed in the instructions, they must be strictly observed. After applying the glue, the parts are folded, straightened and fixed. After the end of the holding time, the strength of the joint is checked.

All work is carried out at room temperature in a well-ventilated area. It is important to perform the gluing, wearing gloves and protecting the respiratory system - this way you can paste over the products safely for health.

Foam rubber is a material used in the most different areas, but most often in the manufacture of furniture as a filler for sofas, armchairs, mattresses and chairs. It often has to be glued, but not every glue provides high-quality adhesion of this material to surfaces. About the rules for choosing the most suitable formulations we will talk in this article.

Choosing a glue for foam rubber - types, features, nuances

The choice of glue is a very important task, on the solution of which the quality of material adhesion depends. Compositions with toluene and trichloroethane are not suitable for gluing foam rubber. These are toxic substances that can provide extremely negative impact on human health and do not provide high-quality adhesion of foam rubber to surfaces.

Foam rubber can be glued only with compounds specially designed for this material. On the modern market a wide range of substances suitable for such work is presented. When choosing an adhesive for connecting foam parts with the creation of elastic and durable seams, it is necessary to pay attention to a number of features of adhesives:

1. 1. Viscosity. An elastic seam at the point of adhesion of products can be obtained only when using a substance with a viscosity of more than 100 s.
2. 2. Dry residue. This parameter describes the ratio of the weight of the dry adhesive film to the weight. liquid substance... The more dry residue, the faster the glue hardens, that is, the quality of adhesion of products increases and the consumption of material decreases.
3. 3. Tint. It is best to choose an adhesive that matches the color of the elements to be glued.
4. 4. Setting speed. Curing should begin no later than 2 minutes after applying the composition.
5. 5. Type of packaging. The most convenient adhesives to use are those sold in the form of sprays in cylinders. With their help, it is possible to treat the most inaccessible places of the materials to be glued with the composition, in addition, they do not clog pores and quickly set.

Taking these features into account, you can choose a glue based on neoprene, styrene-butadiene or polyurethane, which will allow the foam rubber to be glued to any surface with minimal difficulty.

Adhesives - we choose reliable and high-quality

Experts recommend choosing adhesives for foam rubber from well-known, trusted manufacturers. Among the most popular adhesive brands are Rapid-100... It is a non-flammable, solvent-free substance with a high setting speed and a smooth and very strong joint.

88 for foam rubber - a ready-to-use compound that does not require mixing with other components. It creates a strong, elastic and low temperature resistant seam. This composition allows you to work with most surfaces. To create a reliable adhesion, it is enough to apply one thin layer of glue and connect the parts to each other.

BF-6- another good glue on the market, allowing high-quality interconnection of foam parts. It is safe and easy to use; it requires preliminary moistening of the parts to be glued with water and the application of two layers of the substance. First you need to apply a thin layer, wait for it to dry completely, then apply a second one and connect the elements to be fastened together. After hardening, you need to iron finished parts along the seam through a damp cloth with an iron.

SABA- glue for foam rubber, sold in cans for the most simple spraying with a gun. Differs in perfect safety for humans and is not flammable. Its only drawback is a relatively long curing time, but it is resistant to high temperatures and provides increased adhesion to the materials to be glued. It can be used both at home and at work.

Olimpur- a water-based composition, which, when used, requires spot application on the elements to be fastened. Provides good adhesion to a wide variety of building materials including drywall and plywood. It can be used for gluing foam and fabric products on plastered walls.

Foam rubber-2- specialized glue for working with foam rubber, is widely used in the field of furniture production. It can be used to glue foam surfaces together, as well as attach foam rubber to metal, wood, cardboard, fabric, fiberboard, drywall, leather, rubber and many other materials. Any surfaces other than foam rubber are thoroughly cleaned, degreased and dried before gluing to ensure the most reliable and durable adhesion.