Proverbs and sayings about May HORIZONTALLY: 2. May will deceive - in ... will leave.4 ....
![Spring crosswords Make a crossword on the theme of spring](https://i2.wp.com/malyshlandiya.ru/wa-data/public/site/img/may_001-1.jpg)
Vetonite is one of the types of building powder mixtures used for finishing, finishing and construction work. Excellent quality made this brand popular. The main purpose is work at the final stages of leveling surfaces. Putty Vetonit is able to make the walls perfectly smooth, hide cracks and cracks.
Packaging example "Vetonit 25 kg"
The type of mixture depends on the components - gypsum, cement, polymer. They are able to cover walls and ceilings various types- drywall, concrete, wood, etc.
Most solutions are universal, used for internal and exterior finish.
Features of the brand Vetonit:
On the building materials market, Vetonit putty is offered by the manufacturer in a large assortment:
Products are on the market building materials in a package weighing 25 kg. It consists of rare white limestone and high quality polymer materials.
Putty is intended for leveling surfaces in dry rooms at the finishing stage. It turns yellow with prolonged exposure to moisture, it is applied to clean and treated surfaces of various types.
To create the ideal effect, you need a solid, clean (from dirt, grease) and dry workplace.
By mixing dry Vetonit LR+ with water, a thick homogeneous mixture is obtained. white color. Ready composition used per day.
Putty is applied in a layer of 1-5 mm. For large area 1 mm is recommended, and for a smaller one - 3 mm.
Apply putty with smooth movements from the bottom up. It is necessary to maintain room temperature from +10 to +30, to ensure ventilation of the room.
Vetonit LR (25) is based on polymeric substances. It covers plastered and concrete surfaces.
The task that the finishing putty performs is the processing of walls / ceilings different type. It is distributed mechanically or manually. For independent work choose a wide spatula, with its help regulate the thickness of the layer.
Vetonit LR levels surfaces without problems, preparing them for further processing applied in one layer.
This composition is not used for leveling floors, is not used in places with high humidity.
On the properties of this finishing putty not affected by the humidity factor. Area of use - concrete, brick and facades.
This composition does not lie on surfaces that are treated with water-soluble and lime products.
The wall / ceiling is pre-cleaned of contaminants. Preparation of the solution: water is poured into a clean container and putty is poured, whipped for five minutes with a powerful electric drill and settled for three hours.
The finishing composition is applied with a spatula standard sizes smooth movements. The remaining solution can be reused. If the application is carried out in several layers, you should wait for each to dry. It takes 2-3 days.
Facade putty is applied in two layers, each of which is not thicker than 3 mm. After drying, the imperfections are rubbed with grinding materials.
It is used at the finishing stages of repair in dry rooms. The white solution consists of organic matter. Can be applied alone or by mechanical spray.
Suitable for puttying organic surfaces - drywall.
Not suitable:
To achieve the desired effect, the surfaces are treated with an acrylic primer.
The solution is prepared, taking into account the consumption - for a layer of 1 mm it is 1.2 kg / m². The contents of the bag (25 kg) are mixed with water (8 l) using a drill with a nozzle, taking into account that the powder is poured into water, and not vice versa. To obtain a homogeneous thick mass, beat for 10 minutes, then leave for 20 minutes and repeat stirring . You can use the finished mixture at a temperature of +10 0 for a day.
For finishing work, two spatulas are taken - one with a width of 70 cm, and the second - 30 cm. The putty is applied in one or two layers, provided that each is completely dry.
If in the room normal humidity and temperature, there is ventilation, the layer dries out in 2-3 days, after which they proceed to decorative surface finishing - painting, wallpapering.
The sequence of actions for the repair of the ceiling:
Wall finishing steps:
The number of types and brands of finishing mixtures is huge. On the different stages alignments use its various types - start, finish.
The rules for preparing the solution are indicated on the package, follow the manufacturer's recommendations. Having calculated the consumption, they take a bucket, pour it into it right amount water, add the contents of the bag and knead for several minutes with a construction mixer. Now you can get to work, remembering that the mixture thickens during the day and it is impossible to extend its elasticity, you will have to knead a new one.
Ready Vetonite is applied to the surface by spraying or manually. Spatulas with a blade width of 30 and 15 cm are recommended. If applied under acute angle, the layer will be the desired thickness and uniform. To begin with, they take a small amount of the solution on a narrow spatula, then distribute it on the second one.
In the process of work, the finished mixture is constantly mixed with spatulas - this improves its consistency.
In contact with
We level the ceiling in a raw way in cases where the level differences are not more than 5 cm. For example, to remove inter-plate joints, cracks and potholes in the ceiling. Raw ceiling alignment is suitable for smoothing out differences between the plates (this is a common problem in modern buildings).
We cover the furniture in the room with construction film or take it out of the room. It is also necessary to lay a construction film on the floor, which will further reduce the amount of cleaning.
Next is the most important trick: we sharpen the spatula with a bar so that it cuts like a knife. This tool will carry out the main work. We do not take a spatula that is too wide, because the pressure will spread to large area, and accordingly, we will have to make more efforts. Then we scrape off layers of plaster, paint, old whitewash before concrete slab. This work is tedious and hard, but necessary. Especially you need to carefully scrape the joint and seams with the walls.
We sharpen the spatula periodically, the beam should always be at hand. After warm water and a sponge, wash off the remnants of whitewash. We constantly change the water, otherwise the lime will be smeared on the ceiling. When the ceiling is completely dry, we treat it with a roller or brush with a primer for slightly absorbent materials (for example, Betonokontakt). It is advisable to use the primer of the same brand as gypsum mixture, which we will further align the ceiling. We especially pay attention to the corners and seams - here you can’t do without a brush, and we prime the rest with a roller. When the soil is dry, we begin to level the ceiling.
For alignment, prepare a solution. To do this, we use a mixture of Knauf Rotband. Before use, strictly follow the instructions on the package - knead the solution in cold water and mix well after 5 minutes. after kneading, otherwise the solution will dry out directly on the spatula. The mixture dries very quickly, so it does not cost much to knead it. Compared with the wall, leveling the ceiling is much more difficult, and the solution is immediately large quantities apply will not work, and the rest after 25 ... 30 minutes. will have to be thrown away in the form of a frozen monolith. It is better to knead in a plastic basin of 3 ... 5 kg.
We put the solution with a small spatula on the iron, put it on one side. We do not apply the solution to the edges, because it will be squeezed out and flow. Then we stroked with the solution to the ceiling and stretch it along with little pressure, as if rubbing the solution into the ceiling. You need to press so that the solution sticks to the ceiling with us, and not completely squeezed out onto the floor.
We level the ceiling in several layers, so there is no need to try to fill in the entire deep irregularities - we make the mortar layer of such a thickness that it normally holds (no more than 1.5 ... 2 cm). Also, do not try to apply the solution without bubbles and seams - this is very difficult task, requiring high costs time. All this will be equalized by the following layers, for a start, the main thing is to eliminate large irregularities.
The solution sets very quickly, so while we finish it, in the place where we started, we can already continue to work. We cut off the seams with a spatula, again, we do not worry about evenness. To detect protruding bumps and seams, we apply a plinth or a flat rail. It is better to cut the bumps and seams immediately. Next, do not wait until the layer dries, but take on the second layer. We apply it in approximately the same way as the first one.
Then with the last layer (3 layers came out, but with small irregularities it may be less, with large ones, respectively, more) we eliminate minor irregularities, seams, pits of bubbles, etc. We make the solution for the last layer thinner and apply it with a medium or wide spatula . Again, we leave the seams alone - after drying, it is easier to remove them with sandpaper. Having inflicted last layer, we wait for it to dry completely, after the seams and irregularities we clean it with coarse-grained sandpaper. We clean the ceiling from dust with a brush or a damp cloth, cover it with soil (we make the solution liquid and apply it with a spray gun).
For this, we use a finishing putty of the Vetonit LR + type. The solution, without fear, immediately knead in in large numbers(shelf life 2 days)
Hello dear visitors! This time we will get acquainted with a whole phenomenon in the world finishing materials. The hero of the day today will be putty, whose name for craftsmen has long been a household name - putty Vetonit (weber.vetonit LR+).
Now in building stores there are dozens, if not hundreds of types of various putties: gypsum, cement, polymer. But two brands stand apart, they are available always and everywhere, and have been producing them for more than a dozen years. Yes, yes, the first one is Vetonit. And what is the second one? If you are a decorator, then you probably know the answer.
This is sheetrock. There will also be a separate article about him. This item is very, very high quality. In order not to miss the material about, subscribe to updates, the post will be very useful for everyone!
But for now, we are talking about the weber.vetonit LR+ product.
That is what they mean when they say "vetonit". This is a finishing putty on a polymer binder. What does "finish" mean? And the fact that after its application, wallpaper and / or painting, that is, finishing coatings, already go directly.
In other words, such a mixture forms a high-quality coating, ready for painting and wallpapering. As for the binder. Any building mixture consists of a filler and a binder. The aggregate is usually sand, limestone is what forms the bulk of the composition. And the binder holds the aggregate particles together and, of course, provides adhesion to the base surface. In this putty, the binder is a kind of polymer glue, and limestone serves as a filler.
Our hero is produced by Weber-Vetonit, part of the Saint-Gobain group. Packed in paper bags of 25 and 5 kg.
The purpose of this putty mixture is to level walls and ceilings in dry rooms before wallpapering and painting. It is used in all types smooth surfaces from mineral materials and drywall. Formally, it has a white (in practice, slightly grayish) color, as well as its own weak specific smell.
By the way, it costs in our village (Ryazan is called, you may have heard) in the region of 650-700 rubles for 25 kg.
It should be remembered that it is not moisture resistant, not suitable as a base for laying tiles and as an adhesive for anything. For example, some manage to glue on it ceiling plinths. This cannot be done. Its structure is rather loose and fragile, which, however, does not affect its ability to hold wallpaper on itself, but can play a fatal role when trying, for example, to seal the joints of the Civil Code sheets with it.
Water consumption is 9 liters per 25 kg bag. The mixture is stirred with a drill or puncher with a mixer to the state of sour cream, after which it is allowed to infuse for 10 minutes. This time is needed for better dissolution of the binder. It is noticed that after these 10 minutes the mixture thickens a little. Then it is re-mixed.
Again, a separate article will be published about the technique of puttying walls and ceilings, the topic is very important, so subscribing to updates is a sacred thing!)) The article will contain a couple of my know-how, and I will just use Vetonit. And now it's time to find out what are the secrets of his popularity?
I counted three of them:
Of course, the hero of the article also has a drawback. It's the lack of moisture resistance.
Let's say we are wallpapering. They glued the strip, when they suddenly noticed a jam or a bubble that just couldn’t be smoothed out. Needs to be removed and re-glued. So, there is some probability that the strip will be partially removed along with the putty. To be honest, this has never happened to me yet, because I carefully prime the surface before and after puttying, plus I apply it in a certain way so that it lies more densely. But such cases are known. But I don't know of any other disadvantages.
Unless I can recommend using it for painting. Still, his fraction is too big for this, and visually the surface turns out to be rougher than when using Sheetrock. But after all, I am a sophisticated user, for you, such a surface is likely to be more than acceptable. Once I had to paint the ceiling on the loggia according to Vetonit (there was no choice), I carefully sanded it and covered it with two layers of white paint. From the floor, I did not see even the slightest defects. Here is the ceiling:
Vetonit (Vetonit) - a brand that produces powder mortars targeting a wide range of finishes and construction. The products of this manufacturer are in demand, especially the final finish for walls and ceiling structures, which is also used as a floor screed leveler and tile adhesive. Putty has become in demand due to its excellent qualities and inexpensive cost. The production of a segment of this trademark in Russia, an enterprise-industrial division of the Saint-Gobain production and construction corporation (Saint-Gobain) is engaged.
It is unlikely that you will find a company that has been producing dry building and repair mixtures for so long. Saint-Gobain is a large-scale corporation that leads the world market in the production of products for the construction and repair work. She first released her products in the 17th century. Today its group of subdivisions extends to 60 countries, in Russia it is Weber.Vetonit The production of powder solutions is one of several areas in which the corporation has been a leader for many years.
The well-known world brand Vetonit is a huge selection of plaster mixtures, among which the most popular products today are:
The manufacturer Vetonit offers the consumer dry building mixes that can easily compete with building materials from the best world manufacturers. Actually, this corporation is the leader, and this is fully justified by a number of undeniable advantages of its products. Construction and repair powder mixes are endowed with a number of the following advantages:
You can buy Vetonite with fast delivery in our online store, which is one of the official dealers of Saint-Gobain products. We offer competitive prices and convenient options payment. Discounts are available to wholesale buyers. Thanks to well-established logistics, we can always offer big choice dry building mixtures Vetonit.
To date, putty is the most popular way to finish walls and load-bearing structures. Before the main decoration, the surface is carefully processed, one of these stages is the application of putty. In fact, this is a standard leveling of the base with the help of special building mixtures. According to experts, Vetonit putty rightfully bears the title of the best solution for wall decoration. Compared with other analogues, it has a lot of advantages, distinctive specifications and performance properties.
Applying putty is a very time-consuming process, however, the use of high-quality products makes it possible to simplify the puttying of walls, and also contributes to faster drying of the coating (regardless of the number of layers).
Vetonit Weber is a famous collection consisting of individual putty modifications. The most popular is Vetonit lr putty. Due to its unique composition, it is used for finishing plastered, concrete walls and ceilings, as well as plasterboard partitions.
In most cases putty Weber Vetonit used for external design walls, as well as a base for painting or wallpapering (for example, putty Vetonit kr). There are also facade putty, designed for leveling walls outside buildings (facades).
As noted above, this series presents different types putties, differing from each other in their composition and direct purpose. However, aggregates and binders (oil or otherwise) are an integral part of all putties in this series. That is, there are two complementary components, due to which an unpretentious material structure is obtained in use.
Most of the putty composition is occupied by filler (limestone), while polymer glue acts as a binder.
To prepare the putty that is optimal in structure and consistency, dilute the dry mixture with water in accordance with the proportions indicated on the package. The result should be a homogeneous mass of medium density.
Before you dilute the putty mixture, you should know that water must be added to the solution in portions, while its temperature should be approximately equal to 20 degrees.
There are several professional advice to be followed:
Leveling the walls with putty is done in two ways:
The latter option is more often applicable for putty polymeric materials. It all depends on the personal preferences and tasks of the person performing construction works. The putty layer should not exceed 5 mm, otherwise there is a long and uneven drying of the coating.
When applying several layers of putty, each subsequent one is applied only after the final hardening of the previous one.
On the video: tips for puttying walls from experts.
Putty Vetonit is represented by several types. Each product is distinguished by its unique composition and purpose. Thus, the following groups of materials can be distinguished:
This type of product is best suited for use in high humidity conditions. Putty Vetonit vh, in addition to its main task of preparing the surface for subsequent painting, performs a protective function - it prevents the appearance of condensate on the ceilings and load-bearing structures in rooms with high humidity air.
Products are presented in two versions: in white and gray color. The white model of Vetonit vh putty is simply indispensable if the surface is planned to be painted. The second option is used as the primary layer before laying the tiles.
The main feature of this putty mixture is the ability to use on surfaces made of a variety of materials. According to the instructions, finishing putty can be used on plastered, concrete, stone (brick) walls and bases made of expanded clay, foam concrete, gas silicate blocks.
Finishing putty Vetonit uses in high demand in the building materials market, it has a unique composition, low cost and ease of use. Model putty Weber Vetonit lr is intended for finishing dry rooms, therefore, compared to other products of the brand, it has a more viscous and dense structure. After applying the Vetonit finishing putty, they start pasting the walls with wallpaper or painting work using specialized highly pigmented paints.
It is worth noting that this product not suitable for leveling non-standard, three-dimensional planes, as well as large-sized objects. This is how most finishing compositions work, whose main task is to reduce the sharpness of the transitions between layers of plaster and paint and minimize surface irregularities. The white base putty is best suited for gypsum and chipboard surfaces.
The putty is produced in different configurations, most often it can be found in the powder version in bags of 25 kg. You can also see the finished putty mixture, which does not need to be diluted with water.
There is also a product Vetonit LR+. This is a polymer putty from this collection. Due to its unique composition, it is ideal for finishing ceilings and walls in dry rooms. This is the starting and most popular model. Its distinguishing features are low consumption, fast drying, ease of use and very affordable price. The diluted composition can be applied over smooth or rough surfaces (plasterboard and mineral materials).
On the Internet you can find many positive feedback about the use of this product, with most buyers appreciating the low consumption of the material and its versatility. Puttying walls and ceilings with Vetonite allows you to prepare the surface for subsequent paint application.
Important! Putty Vetonit lr plus is usually applied by spraying on walls and ceilings made of plasterboard or chipboard. This starting mixture can also be used as an adhesive layer for the installation of GKL.
Marking KR - means that the putty is finishing. Before its use, a starting solution of VH is first used. Putty Vetonit TT is a universal composition that can be used both as a starting and finishing coating. In addition, this material is also suitable for finishing facades.
The main criterion when choosing a means for puttying surfaces in living conditions is the cost of production. As for Weber putty, all models of this series have different viscosities. Thus, the version of Weber Vetonit lr putty, as well as individual modifications of Vetonit kr putty, have different consumption.
Before buying a putty mixture, you need to calculate required amount material. To make it clearer, consider the consumption of Vetonit kr putty as an example. When finishing walls, about 1.2 kg is spent on 1 m2 of surface ready solution, while seven liters of water are enough to dilute the mixture (this figure may vary, depending on the structure of the material).