Vinyl is far from the latest innovations, so there is a lot of advice and recommendations on the question: how to glue vinyl wallpapers and also what kind of glue to use. At the beginning of their existence, they were called "washable wallpapers" because the vinyl base is durable and resistant to water. Vinyl wallpapers have a number of advantages over paper wallpapers, for example, you can safely repaint them later.

How to glue vinyl wallpaper? Vinyl wallpapers are completely different from wallpapers that have a paper backing. There are many nuances in their sticking, they should be taken into account. Since vinyl wallpaper has two layers ( upper layer made of polyvinyl chloride, and the bottom layer of interlining or paper), they are glued to a special glue, it is designed for heavy wallpaper. By the way, these wallpapers are good because they pass air well, and also from a variety of various structures you can choose the one that is perfect for your space.

Required Tools

So, how to glue vinyl wallpaper and where to start? Prepare everything in advance necessary tools, it will greatly speed up the pace of your work.

You will need:

• roller, in order to roll their seams;
• special brush for priming and applying glue;
• brush for small areas on the wallpaper;
• spatula for smoothing wallpaper;
• sponge (soft) or cotton cloth to remove excess glue;
• scissors;
• roulette;
• a small spatula can be very useful, it will be convenient for it to press the wallpaper in the corners, as well as straighten it in narrow uncomfortable places;
• stationery knife;
• ruler;
• level and paper tape.

Back to index

Preparing the base for gluing vinyl wallpaper

First of all, you need to carefully prepare the walls: get rid of the old coating, whether it be plaster, paint or wallpaper; clear the base greasy spots if there are cracks, they need to be puttied (the putty should dry well before you move on to the next step); walls must be even and strong. You can check the strength of the walls as follows: cut off a small piece of adhesive tape, stick it on the wall, if after you pull it sharply, paint or other wall covering remains on the wrong side, then the base requires careful preparation before starting work.

Next up is the primer. To do this, spread cold water(following the instructions) dry glue, which is designed for vinyl wallpaper, then apply to the walls. Wait until the soil is completely dry, it will take about 3-4 hours. Then treat the walls with a fungicidal composition that will prevent the appearance of mold under the canvases. Waiting for the composition to dry, prepare a thread with a weight tied to it, use it to draw a vertical line along the wall.

So it will be convenient for you to navigate when you glue the first wallpaper sheet. Before you start gluing the canvas, turn off the electricity in order to remove all sockets and switches from the walls.

What else should you know?

1. What glue to use.
2. How to glue.

It is important to note that when sticking vinyl wallpaper, it is imperative to close all windows, fans and air conditioners should not be turned on (there should be no drafts in the room).

To make it easier for you to get rid of old wallpaper, you need to wet the walls with water. Then, after waiting a little, with a spatula, you can easily clean the surface.

Back to index

How to glue vinyl wallpaper?

First, prepare the vinyl wallpaper for gluing. Cut them in strips along the height of the wall, leave allowances of about 10 cm on the strips. If there is a pattern on the panel you have chosen, you need to select the segments so that the pattern matches. Place the fabric in a pile pattern side down.

Back to index

Instructions for preparing glue

The glue is kneaded in a cup of suitable size with the proportion of water you need. Pour the glue slowly while stirring to avoid the formation of lumps. Then the glue should be infused for 5-10 minutes, after repeated mixing, you can start gluing.
What glue to glue vinyl wallpaper? What kind of glue to glue the wallpaper of your choice, the store consultant can advise.

A selection of glue is an important detail, since the texture of this material can be of several types. And the result of your work depends on the answer to the question of what glue to glue vinyl sheets with. The edges will have to be given Special attention, there should not be a single unsmeared area. Therefore, smear them with a brush, and for the rest of the area you can use a roller. The glue is applied to the desired area on the wall, and in some cases to the wallpaper (carefully read the instructions on the package with the wallpaper). Apply glue evenly, in a thin layer, and then fold the wallpaper so that their bases match. Leave them in this position for 5 minutes.
Press the fabrics with a roller or brush (the bristles of which should be short), iron all seams properly.

Back to index

How to glue heavy vinyl wallpaper

So, you have already decided which glue to glue, then you are interested in the question: how to glue vinyl wallpaper correctly. To glue this type of canvas you need at least two people. You need to start from the corner of the wall opposite the window and most correctly from the ceiling, it is convenient to do this from a stepladder, at this time you need to hold the bottom edge. The edge of the wallpaper should coincide with the line you previously drew. Gently press the panel against the wall and brush out (from top to bottom) all air bubbles. Glue should not get on the outside of the wallpaper, if you can't avoid it, gently wipe the protruding glue with a cotton cloth. Do not stretch the width of the vinyl wallpaper during installation, otherwise it may shrink, resulting in empty spaces.

How to trim the edges? Excess material is cut along the ruler with a knife (the knife must be sharp). In the skirting area, leave the bottom edge with a margin of 5 mm. It must be inserted between the wall and the baseboard, but for a more accurate result, remove the baseboard before starting work.

Trying to figure out how to properly glue vinyl wallpaper? They have their own characteristics in the application and, knowing them, the gluing process will not be difficult. Washable vinyl wallpaper - very convenient and practical wall material. They are moisture resistant, it is easy to remove dirt from them, and they contain special antifungal components.

For those who decide to insulate their balcony or loggia and comfortably finish and equip this new room, we can safely advise the use of this material. Properly selected wallpaper will not only give the balcony a pleasant appearance but will last a long time.

• Vinyl wallpaper on non-woven base. The most durable of all types. Such wallpapers are waterproof, have some leveling properties (visually hide surface irregularities), are easy to use (glue can be applied directly to the walls), have a long service life, have a beautiful and rich appearance.
• Vinyl wallpaper on paper basis. They consist of two layers: paper and polyvinyl chloride. They are less durable than non-woven, but will last longer than many other types of wallpaper. Available in both smooth and embossed textures
• Vinyl wallpaper for painting. They can be both paper and non-woven. They are impregnated with a special composition that prevents the penetration of moisture, and painting creates an additional protective layer. The structure of the wallpaper can be completely different

Once you have decided which type you will use, you can begin to calculate the required amount of wallpaper and all the necessary materials.

Calculation of the amount of materials

One of the proven and reliable ways to calculate the right amount wallpaper rolls is to determine the perimeter of the floor and the height of the room. To do this, add up all the sides of the floor and multiply the resulting number by the height of the room. Then subtract from this the area of ​​the window and doorways and divide the remainder by the area of ​​one roll. Round up the final number - you have received the number of rolls that will be needed for pasting a particular room.

If carried out sticking vinyl wallpaper with a pattern, additional calculations will be needed to fit the image. An important concept here is the pattern pitch - the distance separating two identical images along the length of the roll. The difficulty lies in the fact that the actual step may differ from this figure, since you will be gluing the right and left parts.

Please note: in order to avoid difficulties, add 5 cm per strip in 10 cm increments. The amount of waste in this case will be equal to half the step from each strip.

Once you've figured out how many rolls of wallpaper you'll need, you can figure out how much glue you'll need. Do not blindly trust what is written on the package. The amount of glue for vinyl wallpaper is determined on the basis that a pack of 250 g is enough for an average of 20-25 sq. Sometimes the flow rate may exceed these parameters.

Necessary materials and tools for work

You have selected suitable wallpapers, determined how much material is required. Next, prepare all the necessary tools. In the process of preparing the room and when we glue vinyl wallpaper, we use:

• Level
• ruler
• Scissors or knife
• Brushes for applying glue and primer
• Small brush for extra coverage of small areas
• Roller to roll the seams
• Spatula for leveling wallpaper strips
• Spatula for pressing wallpaper areas in hard-to-reach places
• Rags and sponges to remove excess glue from the wallpaper

Now you have stocked up with everything you need. Familiarize yourself with, and you can proceed to the direct process.

Stages of work

Stage I: Wall preparation

1. Remove old finishes from the walls: wallpaper, whitewash, paint. Surface must be level
2. Treat the walls with a special antifungal solution
3. Dilute adhesive for vinyl wallpaper and prime the wall
4. Using a level, draw a vertical line - a guide for the first piece
5. Turn off the electricity, remove all switches and sockets from the walls

Stage II: Sticking vinyl wallpaper

1. Cut the rolls into even strips (+ 10 cm allowance)
2. If you glue non-woven wallpaper, then smear the wall with glue. Paper - glue is applied to the strips themselves
3. Place the first piece exactly along the drawn line. It is better to glue in pairs: one person applies upper part piece, and the second supports the bottom
4. Glue the remaining pieces back to back. If the wallpaper has a pattern, don't forget to combine it
5. Smooth out the glued pieces of wallpaper with a roller from the center to the periphery. Air bubbles must not remain
6. Roll the seams carefully
7. Apply glue to the outgoing areas
8. Remove any excess adhesive
9. Trim excess wallpaper from the ceiling and baseboards. Use only sharp scissors or a knife. dull blade tears wallpaper

Sticking vinyl wallpaper completed.

How to glue corners and joints: refinement of small things

The most difficult and painstaking work is the refinement of small things and gluing corners and joints. To avoid trouble in the form of gaps and pronounced seams, overlap the pieces of wallpaper. For vinyl wallpaper on a non-woven base, it is 1-2 mm, on paper - up to 5 mm. It is somewhat more difficult to solve the issue of gluing corners.

This is the most difficult part of the job: the question, how to glue corners, often confuses, especially beginners. Starting this stage, thickly coat the corner with glue. It is better to cut the canvas in such a way that it goes 2-3 cm onto adjacent walls.

If you measured the angle with a level and found that it is very “littered”, use the cutting method. Glue the first piece in the same way, only leave the edges wider - about 9 cm. Place the side strips from it strictly vertically (the same level will help with this) at a distance of 2 cm. Cut the overlap with a sharp knife - both layers together. Then glue the top layer back on.

Completion and quality check

After all the main stages of work are completed, check how you glued the vinyl wallpaper. See if there are any unglued areas and bubbles on the walls. Replace previously removed sockets and switches. If there are any radiators, batteries or other devices in the room, behind which hard-to-reach sections of the wall are located, then they can not be pasted over, but simply painted in a color similar to the wallpaper.

You have become familiar with how to glue vinyl wallpaper, and learned that even on the balcony and loggia they can be used as wall decoration. If this article helped you make repairs, then leave your comments. Or maybe you have your own secrets of wallpapering? Please share your unique experience. Your advice can be very useful to many people.

How to glue vinyl wallpaper photo

Below are photos on the topic of the article “How to properly glue vinyl wallpaper: step by step instructions". To open the photo gallery, just click on the image thumbnail.

How to glue vinyl wallpaper video

We also invite you to watch the video on the topic of our article. This video shows you how to properly install vinyl wallpaper.

Liked the article? Subscribe to site updates via RSS, or follow the updates:
In contact with , Facebook , Classmates , Google Plus or Twitter.

Subscribe to updates by E-Mail:

Tell your friends! Tell your friends about this article in your favorite social network using the buttons in the panel on the left. Thank you!

Discuss article

To the entry "How to glue vinyl wallpaper: step by step instructions" 10 comments

For the first time, when it was necessary to glue vinyl wallpaper in the apartment, there was a slight shock. How to work with them?! But after reading the articles, having studied all the subtleties, wallpapering was not as bad as it seemed to me at first. The most important thing in this case, in my opinion, is to prepare the wall well for wallpaper. It should be clean (without any traces of the old coating) and even.

And I was just very disappointed for the first time after gluing vinyl wallpaper, because I didn’t know all these subtleties and pasted this together with my husband. On the second day, they simply gasped together, the joints generally bristled. So for me the joints and corners turned out to be a big problem, and for the second time they hired a specialist. It is a pity that such an article did not catch my eye earlier then.

Recently glued non-woven vinyl wallpaper in country house. Irregularities, of course, they hide a little, but I had to fiddle with the joints for a very, very long time. Due to the fact that the walls are a little uneven wallpaper go either butt to butt, then overlap. Where joint to joint - everything is fine, even the seam is almost invisible. But that's where the overlap is the trouble. Wallpaper does not want to stick together, so the top layer sticks out very much. Maybe it's because the wallpaper is thick.

We glue wallpaper at home always on our own. It always turns out differently. We often argue with my husband about how to properly glue wallpaper. After reading the article, we learned many subtleties of this difficult matter. It was useful to learn the stages of work, we realized our mistake, that we did not have the right organization and did everything in a blunder. Now we will glue strictly according to your recommendations.

I was looking for a similar instruction on the net for a very long time, and thank you so much that you painted everything step by step. my husband is on a business trip and I had to do this “fun” thing myself - to glue wallpaper. the business is not easy, but there were helper children nearby (although they are 5-6 years old)) and a fighting spirit) I’ll start by saying that choosing a wallpaper is very difficult, firstly, finding a quality product and at a nice price is not always easy , secondly, to match the interior so that in a year or two the eyes do not get tired - sometimes there is not enough patience, well, to please all family members by color and pattern is not an easy task. in general, we dealt with this quickly, but here’s how to glue them if you don’t call a team ... if I hadn’t found a video and photo, I would hardly have taken up this business. for me the most difficult was: gluing the corners. if not for your site, it would be just a “corner hell”, since I didn’t know how, what and where. thank you so much! in general, my wallpaper was glued in 3 days)) with my own hand) so I feel like a heroine)) everyone is happy, thanks to you))

When we glued vinyl wallpaper in a private house, the “first pancake” was a huge lump! But ... the Internet to help and having learned from this article a lot of all sorts of problems - they risked gluing another room on their own! A nice hint was to apply an antifungal agent to the walls. I hope the walls won't get moldy. But all the same, it was worth a lot of work to glue the corners correctly! But we did it! Now we have the experience of gluing and the next rooms are not so scary. I would like to put wallpaper in the living room. I think we can do it now!

When renovating a home, many people face difficulties in wallpapering. paper wallpaper every day they lose their popularity, giving way to their vinyl brothers. With an eye-catching design, vinyl wallpaper is waterproof, UV-resistant and durable, and can easily hide any wall imperfections. Such wallpapers are the perfect companion for a young family, allowing parents not to renovate the children's room every year.

Due to the unique technology of vinyl production, the surface of such types of wallpaper can visually imitate natural fabrics and materials such as: leather, wood, marble and silk. Its only drawback, perhaps, is that when smeared with glue, they are easily stretched, and when the glue dries, the wallpaper loses its shape and shrinks.

Therefore, the faster you glue them, the less defects can be seen in the work performed. But, before proceeding with the repair, you need to find out what is the main advantage of vinyl as a material and the technology of how to glue vinyl wallpaper.

Types of vinyl wallpaper

Such canvases are made from foamed polyvinyl, which gives the material structure, which, combined with increased density and a variety of textures, allows you to hide defects on the surface.

A variety of colors, textures and manufacturers will allow you to make an individual choice, in accordance with the taste of the owner. The ability to paint vinyl wallpaper, being a kind of bonus, allows you to show your imagination and decorate the walls in an exclusive and sophisticated style.

Vinyl (polyvinyl chloride, or PVC for short) is a transparent colorless plastic, which is chemically resistant to acids, solvents, alkalis, does not burn in air and is characterized by low frost resistance up to -15 0 C, glued to a paper base.

To date, there are two options for vinyl material: paper-based and non-woven. For paper-based wallpapers, the bottom layer is made of paper, and the top layer is made of polyvinyl chloride.

How to choose and glue vinyl wallpaper video

Wallpaper preparation

The preparation process began, in fact, in a building materials store at the moment when the color, pattern, and also the number of rolls corresponding to the area were selected. All further recommendations will relate exclusively to the process of cutting rolls and joining the pattern. Cutting vinyl wallpaper begins only after combining the pattern. Care should be taken to ensure that the subsequent canvas is combined with the previous one.

Glue preparation

Dissolve the glue following the instructions. It is necessary to take a clean container, pouring into it the amount of cold clean water indicated in the instructions. Working with a drill with a mixer nozzle, you should slowly bring it into the water. It is strongly not recommended to immediately pour out all the dry glue, it is important to do this gradually so that lumps do not form in the mixed substance. After mixing the whole pack, let it stand for a while, then mix thoroughly again. The consistency should not be too thick.

sticking

The most important stage of repair, how to glue vinyl wallpaper, should be approached with the utmost seriousness and painstaking work. Since the canvases of vinyl wallpaper are on top of each other, the joints will be invisible. Therefore, you need to combine the canvases with maximum accuracy.

First, let's make a markup by drawing a straight vertical line on the wall, which will be your reference point. It is desirable that the first panel is glued from the window. The glued wallpapers are straightened from top to bottom with a brush with short bristles. To avoid the formation of bubbles, the brush must be moved from the center to the edges of the cloth.

All subsequent strips of vinyl wallpaper are glued back to back with the previous one. It is strongly not recommended to wipe excess glue with a wet cloth. Drafts should be avoided by maintaining average temperature in a sealed room.

In order to glue wallpaper in the corners with high quality and correctly, wallpaper pasteurists advise not to bend the entire panel for pasting at the junction of the walls. It is undesirable to combine two solid panels in one corner. Optimal for the corner is a sticker of a continuous strip with an overlap of 3 by 5 centimeters.

How to economically and quickly paste vinyl wallpaper video

Trimming the excess from above and below is necessary only when you are convinced that no bubbles have formed on the glued wallpaper. Having found a bubble, you need to quickly pierce it with a needle, force the air out of it and press it carefully so that the wallpaper adheres tightly to the surface.

Sticking vinyl wallpaper in hard-to-reach places

Problem areas when gluing finishing material for walls are windows, doors, cornices, skirting boards and radiators. However, the most difficult area to work with is electrical outlets and switches. To carefully and correctly glue the wallpaper in this area, you must:

1. turn off the electricity in the room;
2. take it all off electrical sockets in places where wallpaper will be glued. It is important then to remember their location, so that after gluing you do not have to look for them under the panels;
3. stick wallpaper;
4. make cruciform cuts in the area of ​​\u200b\u200bswitches and sockets;
5. bend the corners in the places of the cuts inward, under the switch (socket);
6. install switches and sockets in place.

If you decide to reinforce theoretical knowledge in practice, but so far you are afraid to start repairing yourself, then watching the video material on our website will allow you to avoid many of the troubles associated with wallpapering.

How to glue video wallpaper

In conclusion, I would like to wish all beginners and wise repair masters not to be afraid to take on vinyl. If you delve into all the subtleties of this difficult, but fascinating business, then you will understand that gluing vinyl wallpapers is not as difficult as it might seem at first glance. As they say - the eyes are afraid, but the hands do!

4240 0 4

How to glue vinyl wallpaper: independent work from A to Z"

Vinyl samples have earned popularity for their beauty, durability, easy maintenance and fast gluing. And the question of how to glue vinyl wallpaper can be solved effectively. How to do it yourself with high quality and quickly? Why this type of fabric? This is my article!

I opted for vinyl material because:

1. Such canvases are indispensable in wet rooms.
2. If you stick them on uneven walls, then these defects will become invisible.
3. Vinyl care is easy.
4. Durability is high.
5. There are samples of any kind: from stone imitation to silk-screen printing.

Convinced you of your choice? Now it remains to decide on the texture and color, and prepare for gluing with your own hands. Remember, moving towards a goal begins with preparation. So:

Preparation for work

Calculation of material consumption and preparation of walls is the first stage of repair.

I calculate the required amount as follows:

• I determine the height to the ceiling from the floor plinth;
• I measure the length of all walls;
• I multiply this amount by the height;
• I subtract the area of ​​window and door openings;
• I divide the result by the area of ​​​​1 roll.

You should always buy more material so that the pasting ensures that the ornament matches. To do this, I determine the distance between it: if it is 10 cm, then I add 5 cm to the strip. In addition, each roll should be checked for shade matching. An extra strip will save you during minor repairs: if, for example, a cat tears the material.

On the roll in the instructions there is an indication of which glue is needed exactly. this species wallpaper.

Wallpaper walls

So, foamed vinyl is popular because it masks wall defects. This will make it easier to prepare them before gluing the vinyl sheets.

First, I got rid of the old finish: I cleaned off both the paint and the crumbling plaster. It is easier to glue the canvases on drywall: it is initially even and does not require tedious alignment (if the seams are puttied). After all, the curvature of the walls more than 1 cm must be leveled!

Then you need to turn off the electricity for the entire time of gluing and remove the sockets, switches, so as not to interfere.

Let's move on to the next step - find out how to paste over the walls with vinyl wallpaper.

We work with non-woven base

Finishing with this type is also available to beginners, because non-woven fabric does not get wet, therefore it does not shrink when the glue dries.

The level (plumb) will give the vertical where we want to stick the first canvas.

Glue preparation

Usually wallpaper glue accompanies instructions. By the way, saving on the solution often spoils expensive repairs. So which glue is best? I chose from expensive, special for vinyl, heavy materials.

The proportions of the ratio of water and powder strictly comply with the instructions:

• Pour the powder with a little water.
• Stir the mass for 3 minutes with a conventional mixer (I don’t have special nozzles for a drill). This home appliances perfectly coped with the task - crushed all the lumps.
• Next, add required amount water and stir the suspension with a wooden spatula.
• Then leave the solution to swell for the time specified by the manufacturer.

Sticking stripes

• It is only necessary to cover the wall with glue, and leave the canvas dry. So, the question of whether the wallpaper needs to be smeared with glue is decided negatively for the non-woven base. So, the process is less laborious, besides, we save glue.

Beginners should not rush into work. I recommend doing everything carefully, because a slightly dried-up solution on the wall can be refreshed, and an unevenly placed canvas can be torn off and glued again.

• We coat only a strip of the wall for the first canvas. For corners, we also mark the edges of the non-woven base with glue so that the wallpaper holds more firmly.

• You need to fasten the material from top to bottom, and it was more convenient with an assistant: someone glues, and someone supports the canvas. It will be especially convenient to work with an assistant if it is a meter-long wallpaper, because they are much (twice) wider than the usual half-meter samples.

• Then, with a roller, smooth the canvas from the center to the edges to squeeze out excess glue and air. Often, when sticking to the ceiling, part of the canvas peels off, which means that it needs to be smeared again.

• Try to glue the canvases end-to-end so that vertical tubercles do not form at all their junctions.

• We coat the joints with a concentrated solution, and with pressure, roll rubber over them.

• The corners are especially time-consuming, they should be pasted over especially carefully and slowly.

• At the corners, you can use the technique "into the corner" or "through the corner". For example, on an allowance of 5 cm glued right up to the corner of the canvas, overlap with a strip for the second wall. Then, passing with a knife along this double junction, connect them.

During gluing, we avoid drafts so that the material dries evenly.

At the end - pruning

When the wallpaper is dry, attach a long ruler, construction knife cut off the excess canvas: first at the ceiling, then at the floor. Moreover, the bottom can be run directly under the plinth (where possible).

Then you need to cut holes for switches and sockets. First - from the center crosswise, then cut off the edge.

Now you can install previously removed boxes on de-energized sockets and switches when wallpapering.

Sticking the paper base

The rules for gluing samples on a paper base are a little more complicated due to possible damage material when wet from the adhesive.

Among important tips in the case of how to properly glue vinyl wallpaper, there is a recommendation for priming walls. After all, it is she (especially antifungal) that is needed under vinyl on paper to ensure its durability. The non-woven base itself will protect itself from mold.

The price of wallpaper with a paper base is affordable, but their installation is more difficult: they are heavier, so sometimes they break and tear. However, the gluing is the same, and such dense samples better hide wall defects.

• We also apply glue to the canvas with a flat brush.

The soak time is indicated on the roll by the manufacturer and should be observed with each sheet. Otherwise, one strip will stretch more strongly, the second - weaker, which will give a skew.

• We start from the corner and from above, align it vertically (a line drawn with a pencil along a plumb line), then press it in the center with a roller and along the entire length.
• We expel air and glue, roll the edges, moving the roller away from the center. You can smooth it with your hand, but it is more effective with a roller.

• We clean the glue that has come out along the edges with a dry rag.
• Prematurely dried edges are smeared with a thin brush.

If the canvas is stretched, when it dries, a gap sometimes appears at the junction. Here, once again, we will smear the glue and slightly stretch the wet canvas, because the foamed vinyl is elastic.

Dry vinyl wallpaper 2 days.

You can quickly and effectively update the interior with a polymer sticker. Its installation is easier than a large roll cut. Especially such samples are attractive on plain walls, and even children are happy to glue them in the nursery. Such an accent on the wall is inexpensive and bright.

Consider whether it is possible to glue with PVA glue. This composition dries very quickly, forming folds on a wet canvas. But it can be used in problem areas - near baseboards, a radiator, under a window sill, if connected to wallpaper (1: 3).

The problem of how to peel off old wallpaper from the wall is also simply solved. Another plus of vinyl canvases is the ease of their dismantling: they peel off with a spatula, leaving a surface ready for a new pasting.

Wallpaper second layer

Consider whether it is possible to glue vinyl wallpaper on vinyl. At the dacha, I ran into a problem: a house made of clay blocks lined with bricks. The old polymer wallpaper was glued tightly, torn off only with a layer of plaster along with clay, forming terrible brown bumps.

Good thing the cover was smooth, not foam vinyl. Therefore, in the question of how to glue vinyl wallpaper on vinyl wallpaper, I decided simply. I took the advice of the master: the irregularities are invisible under the structural layer or wallpaper with small ornaments, and bought these.

Then I did everything according to the instructions above. But with one amendment: the joints of the old wallpaper should not coincide with the newly pasted ones. And everything worked out. And most importantly - hold on!

Conclusion

So, the advantages of these canvases are obvious: beauty, durability, ease of sticking, and care is a pleasure. Thanks to step by step instructions described by me, you now know how to glue paper-based or non-woven vinyl wallpaper. Do you have a comment or question - write in the comments! But before that, do not forget to watch the video in this article.

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

We will send the material to you by e-mail

Wallpapering is an important part of any renovation. This process is laborious and complex. Many people are interested: how to glue paper-based vinyl wallpaper. At the same time, it is important to choose a high-quality glue, since when using a low-quality composition, everything will need to be finished again. Features of gluing depend on the selected material. Vinyl panels are popular, which are characterized by reliability, wear resistance and UV resistance. Before you purchase the material, you should find out the features of working with this material.

Finishing with canvases vinyl backing provides an opportunity to apply unusual design techniques in the interior

Gluing consists of the following steps:

• walls are being prepared;

• a primer is applied, with the help of which shortcomings are repaired and miniature irregularities are hidden;

• glue is diluted in the container. You should get a solution without lumps and clots;

• using a level, a line is drawn for gluing the first sheet;

• electricity should be turned off in the room, and all switches and sockets should be removed from the walls;
• each roll is cut into strips;
• applied to the workpiece adhesive composition, while not leaving dry places;

• a solution is also applied to the surface of the wall;
• sheets are glued end-to-end, without allowance;

• excess glue is removed with foam rubber or a soft cloth;

• the edges are trimmed with a clerical knife.

Useful information! There should be no drafts in the room. The fabrics will dry for two days.

Related article:

Secrets of the correct gluing of the ceiling

The ceiling surface must be glued before pasting the walls. In this case, it is worth choosing lighter materials.When processing the ceiling, it is worth taking out all objects and carpets. If items cannot be taken out, they are covered with plastic wrap.

Note! Vinyl is an excellent conductor of electricity, so it's important to remove any exposed wires.

How to glue the material in the corners?

Corners require special care. When the distance to the corner zone is less than the canvas, the sheet is cut off with an overlap. This part will move perpendicular wall surface. Then the second layer is overlapped. Sheets are passed by a special roller.

How long does paper-based vinyl wallpaper dry?

The drying time of the canvases depends on the dryness of the working surface and temperature values. If the humidity is exceeded and the temperature is slightly lowered, then the finish will dry for a long time.

Also, the drying time depends on the type of glue, the amount of solution used and the microclimate in a particular room.

Non-woven surfaces can dry within a day, and paper surfaces for a shorter time period.

Useful information! When drying, the canvas with a paper base can shrink significantly, so you need to make sure that the seams do not move out.