DIY wall clock for the kitchen. How to choose a kitchen clock or make it yourself

so interesting and modern design You definitely won't find a watch in a store. Simple design out quite available materials. If your guests see this watch at your place, they will definitely pay attention to it, and certainly will not tell you that they saw the same in a nearby store.
Materials I took for the watch:

• Wooden board 35 x 35 cm, 18 mm thick (hardware store).
• A piece of plywood 3 mm thick (hardware store).
• Nails 13 mm long or self-tapping screws.
• Clockwork (can be taken from a boring watch).
• Yellow paint.
• Black marker.

Woodworking tools I used:

• Hand saw.
• Screwdriver-drill.
• A hammer.
• Pliers.
• Ruler.
• Right angle ruler.
• Bit.
• Sandpaper.

We're sawing a board.

We take our board and determine the size of the future hours. We draw and saw off the base with a hacksaw or hand saw. The 18mm board saws well and it is advisable to use a saw with fine teeth so that the edges are even and minimal machining is required after sawing.

Making squares

Further, on one of the corners of the base, I drew rectangles 10 x 5 cm. We drank them with a step. Then I cut these rectangles into 5 x 5 cm squares.
Now you need to sand all the squares, removing burrs, and making the surface smooth.

We start milling holes for the clock mechanism.
We take the clock mechanism and apply it to the center of our base. Outline with a pencil. Next, we cut the recess. I used a wood cutter fixed in a screwdriver. You can also use a chisel and make a recess with it.
During work, we try on the recess to the mechanism. If everything is fine in the horse we drill a hole for the shaft exit, on which the arrows will be put on. After all the work done, we will process sandpaper base to make it smooth.

Watch assembly

Before proceeding directly to the assembly of the watch, it is first necessary to prepare 18 small jumpers - connectors. Take a piece of plywood and use a hacksaw to cut 18 jumpers 0.7 x 4 cm.
We arrange the base, lay out our squares almost in a chaotic manner. It is necessary to arrange the squares so that the plywood jumpers are practically invisible. On the reverse side, respectively, we connect everything with jumpers and nails.

Clock painting

For painting, I used spray paint from a spray can. We hold the balloon at a distance of 20 cm and spray on the watch, from one side. After a while, and the paint dries very quickly, we turn the clock over and spray the paint on the second side. Everything, the base is almost ready.

Draw numbers

I took a black permanent marker and just drew the numbers. There is another option - print the numbers on a computer, cut and paste. So you can do that too if you want.

Watch hanger

I screwed in 2 screws so that there was something to hang the clock on. And I tied a rope to the screws so that I could hang it on a nail in the wall or a self-tapping screw.

Currently, do-it-yourself clock decoupage has gained tremendous popularity! This is not surprising: in the age of stress, sometimes you want to do something for the soul, and if it still has a functional and aesthetic purpose, then this hobby is simply doomed to success!

Clock decoupage technique

If earlier it was difficult to get decoupage materials and templates, now they are available in abundance in any bookstore or department for creativity. In them, you can easily purchase stencils, dials, blanks, hands, accessories or other attributes for decoupage watches. Therefore, this newfangled hobby is an acceptable option for beginners.

Consider the technique of decoupage watches with your own hands in stages.

1. Stencil preparation. So, you have purchased a watch blank in advance in a needlework store (as in the photo).
2. The surface of the workpiece should be prepared in advance: sand if the watch is wooden or degrease if it is plastic.
3. Create a background image, as in the photo. You can choose any style depending on your preferences or the interior features of the room that you want to decorate with a future masterpiece.
4. We glue the selected picture onto the workpiece (see photo).

Advice! Torn edges are easier to mask, so it's better not to cut out the image, but simply tear it off the paper with your hands.

You can glue the picture on the template either with PVA glue diluted with water, or with special decoupage glue. The main thing here is to act carefully, avoiding wrinkles in the picture. After that, the blank of the future clock should be dried and covered with acrylic varnish and then dry it again. Repeat this pattern three times.

This technique is described in more detail in the video at the end of the text.

Choose a style

Before proceeding directly to the decoupage of watches with your own hands, you should decide on the style of the future masterpiece. Now the most popular decoupage options are:

• provence;
• vintage or "antique";
• "Hollywood".

First you need to choose the room in which you plan to hang your future masterpiece. For example, if this is a kitchen, then some kind of romantic sketch, or a Hollywood-style clock, will look out of place in it. On the contrary, Provence or vintage style clocks will fit perfectly into the interior of most kitchens.

Perhaps the Provence style is one of the most common and understandable. If the directions of Provence and vintage are somewhat reminiscent of each other, then the Hollywood style is fundamentally different from them. So, it is characterized by the following nuances:

• Use as the main following colors: black, red, white, blue. Whatever colors you choose, they should, if possible, contrast with each other and stand out from the background.
• Maximum brilliance, the use of all kinds of rhinestones is welcome.
• Using images of famous Hollywood actors, preferably from the Golden Era of Hollywood: Audrey Hepburn, Clark Gable, Marilyn Monroe, Greta Garbo, etc. In this case, you will partially get a retro style.

All styles are suitable for beginners. These options can be found by watching the video at the end of the text.

Features of decoupage of the dial

The finished dial can be freely bought in the store, but it is much more interesting to make it yourself. So, the numbers on the clock can be made almost from the first objects that caught your eye. It all depends on your imagination and, of course, on the style of decoupage watches.

Let's say you chose the Provence style. Then for the dial it would be appropriate to use corks from wine bottles, dried lavender branches, soap in the form of small hearts. In addition, it is not necessary that there are numbers on the dial: it is enough just to mark the divisions.

The idea for the clock on the Pink Floyd record.
It is also convenient to make a watch on a plate because the center of the dial for the hands is precisely marked. However, be aware that the circular label in the center is difficult to "overlap" if it is white color. It would be more practical to take a plate with a red sticker for the base.

If decoupage of ordinary wall clocks may seem boring, then we have saved up another original option for you - decoupage of clocks on a vinyl record. The technique of such decoupage is not much different from that described above, but it has its own characteristics:

• First you need to prepare the plate, primed it with white paint. Let her dry for a while.
• To apply the picture, it is better to use special napkins for decoupage. We tear off the two lower layers and apply only the upper one to the plate. With a flat synthetic brush, apply glue on top of the napkin. Let it dry, and then cover our workpiece with a layer of varnish. After drying, apply varnish again.

Attention! You need to use special varnish and glue for decoupage.

• We make the markup of the dial. For this you can use wine corks, shells and any other items that have enough imagination.

Advice! Apply the paint with a dishwashing sponge.

• We cover the clock with at least three layers of acrylic varnish.
• Glue the sticker on the back of the plate with cardboard. We make a hole in the center and glue the clock mechanism. We attach the arrows, insert the batteries.

The original watch is ready!

Clocks classic and modern made of solid wood with oak veneer, natural elements in combination with black glass, chrome and plastic will be an excellent element of interior decor modern home. You can choose from several options: with a different number of arrows, from different materials, different size and forms arranged vertically or horizontally, additionally decorated with various decorations. The choice of options is simply huge. The watch is very important element interior, because they not only have a clear practical function, but can also become the main decoration of the walls.

They can be hung in any room, but when we buy models for the bedroom, it is worth listening to them so that they do not tick too noisily. This sound can be disturbing and wake you up in the silence of the night.

The choice of dial design is extremely important for interior design. For original variants it is worth allocating space on the wall with plain wallpaper or plaster. In the kitchen, they should be placed away from the stove to avoid getting grease and dirt on them.

Such a wonderful item for interior decor will show time and will remind you of the most beautiful moments, which you captured in photos, and will also contain pictures of family and friends. They are the perfect gadget for sentimental people and their families.

This is an ingenious solution - a clock under the photos. They can be equipped with colored frames in which you can place your favorite pictures, sayings or pictures. Them interesting design suitable for almost any interior. If you are looking for a gift for owners new apartment, for a wedding or any other occasion, or looking for a way, this option will be the perfect solution. This decor is brilliant, original and practical!

The clock from the photos on the wall attracts at first sight:

• colored or chrome frames for photos;
• unique interior decoration;
• beauty;
• practicality.

There is such an option, which is sold as separate elements with a dial. You will stick each division yourself, and insert your favorite photos into ready-made frames. Made in a minimalist style, they will be perfectly presented in .

They can be glued to the wall, glass, furniture - wherever your fantasy tells you. The clock is supplied in parts for self assembly. Separate dial and magnetic photo frames. The mechanism is quartz. Realization - metal. A template is supplied with mechanism and hands to facilitate uniform distribution individual elements.

Such an original decor item can be made independently. To make a clock on the wall from photos with your own hands, you will need to purchase, be patient and have good frames. First you need to drill a hole in the wall for the dowel and place the clock mechanism.

To make a clock with photographs, you need to carefully make a markup on the wall, outlining the 12 digits of the dial. Next, turn on the fantasy. You can place just 12 favorite pictures.

For a children's room, you can use photos on the clock of the first 12 months of a baby's life, such a clock will clearly show how your baby has grown and what successes he has achieved every month. They symbolize the transience of time and the first thought of the guests will be: “how quickly time has passed”. Such a sentimental decor will appeal to parents, grandparents of the baby.

Thus, with the help of a simple and inexpensive clockwork, which you can easily buy in a store, you can make a perfect unique item decor for the interior of your home. At the same time, it does not look at all cheap and simple, but very original and stylish. It will suit many styles, we can say that it is universal. In its manufacture, you realize your Creative skills which brings a lot of joy and satisfaction.

Now, in order to remember the most pleasant moments in life, you do not need to get an album out of the closet, photographs are always in front of you, and in addition to aesthetic satisfaction, they bring practical benefits. It is unlikely that your guests will remain indifferent to your creation, most likely they will ask you to tell them how to do it in order to also decorate their home.

Karina Moroz | November 9, 2015 | 9482

Karina Moroz 9.11.2015 9482

Tired of the mediocre interior? We will share ideas on how you can decorate any room with unusual hours made by hand.

Happy hours are not observed. However, decorative Wall Clock can become not only a wonderful addition to any interior, but also an original gift.

You will need a watch mechanism (you can buy it in a special shop or take it from an old watch), some kind of flat object to create a dial and a little imagination.

This idea will appeal to creative people.

You will need:

• dominoes;
• strong glue;
• clockwork;
• metal sieve for filtering noodles;
• ruler;
• ballpoint pen, marker or pencil.

1. Wash the sieve thoroughly and dry.

2. Use a ruler and a pen to mark where the dominoes should be placed. Glue them to the sieve and leave to dry completely.

3. Install the clockwork as indicated in the instructions on its packaging.

Set the time on the clock and hang it on the wall.

2. Vinyl wall clock

You will need:

• clockwork;
• vinyl record.

Make a hole in the center of the vinyl record. Attach the mechanism on the back side, and the arrows on the front side.

Vinyl record can be given unusual shape. To do this, you need to put it in a preheated oven for several minutes, then take it out with kitchen gloves and “blind” any figure from the melted plate.

3. Clock with a floral motif

If you haven't been able to get hold of a clockwork, you can creatively remake an old wooden clock.

You will need:

• wooden wall clock;
• acrylic paint for wooden surfaces;
• tassel;
• glue spray;
• rhinestones or beads;
• a printed color drawing with a floral motif (you can use beautiful wrapping paper or a piece of wallpaper instead).

1. Unscrew the clock mechanism.

2. Paint over the edge of the dial with color acrylic paint. Wait for it to dry.

3. Place the clock face on the plant motif and draw around the outline of the clock. Then cut out a circle slightly smaller than the clock face.

Surely you guessed that skilled people can transform anything and, as a rule, this does not require a lot of money or unique materials. Enough improvised means and good imagination.

We wrote in the previous article, so check it out. Perhaps you can pick up a few ideas for yourself.

Today we will talk about how to transform a wall in your house or apartment by creating a clock. If you want to learn how to make a wall clock with your own hands, then this article is for you.

Clock "Flower"

To make this watch you will need:

• Plastic teaspoons of any color - 220-250 pieces;
• silicone adhesive;
• Scissors;
• Dial from an old clock;
• Paint (optional);
• Screwdriver and screws;
• Expanded polystyrene or ordinary foam of medium thickness - one square.

Take the styrofoam base and cut a hole in the inside for the dial. Using self-tapping screws and a screwdriver, make fasteners so that the future product can be hung on the wall.

Then take the spoons and glue the heads in the form of a flower around the hole, as shown in the picture.

When the gluing is over, you can paint the spoons in any color if you chose white.

When the paint dries, put together the dial and the "petals".

As a result, you will get such a clock.

moon clock

Such a clock will be the perfect solution for a nursery, especially if your child loves space and everything connected with it. In addition to the Moon, you can take any satellite or planet solar system.

You will need:

• Plywood sheet;
• White cardboard;
• Scissors;
• fasteners;
• Glue;
• Clockwork;
• Printed print of the moon or planet.

Take a sheet of plywood and cut out a circle of the desired size. Based on the resulting circle, cut out the backing for the watch from white cardboard. Next, glue the cardboard onto the plywood.

After that, take a printout of the moon and cut it to fit the base, then glue it on. When the print is dry, drill a hole in the center and install the mechanism.

Attach the fasteners to the back of the plywood and hang the product on the wall. This way you can make a big clock. The main thing is good print resolution and high-quality printouts.

watercolor clock

In order to make this clock out of wood, you will need:

• birch plywood;
• Watercolor paints;
• tassel;
• Wooden numbers for decoupage and silicone glue (optional);
• Clockwork;
• Fasteners.

Take plywood and cut out a circle. After that, using a brush, moisten the base with water and begin to carefully make paint stains. The color scheme can be any, according to your desire. When the paint dries, you can glue the numbers. If you decide to do without them, then you can proceed with the installation of the mechanism. To do this, just drill a hole in the center and set the arrows. You can also varnish the watch.

Finally, install the fasteners and everything, your watch is ready.

If the interior in your house or apartment is made in a minimalist style, you can make a wall clock with your own hands following all the rules of minimalism.

You will need:

• Plywood;
• Black paint;
• Gold colored clock mechanism;
• Fasteners.

Cut out a circle from plywood and paint it black, then varnish it. Cut a hole for the mechanism and install it. Attach fasteners and hang on the wall.

Knitted watch

If you ask how to make such a watch, we will answer - very simple. The only condition is that you need to be able to knit. Otherwise, there are no problems. You won't even need a crate.

You just need to have an old round watch, thread and knitting needles (hook). Knit a watch case and put it on top.

The result is this beauty.

Dominoes

Beautiful and original watches for which you need:

• Base - plywood, wood;
• Dominoes - 12 bones;
• Clockwork;
• Dye;
• Silicone adhesive.

Take the base, cut a square out of it and paint it any color you like. If you wish, you can varnish the base. After that, cut a hole in the middle and install the mechanism. After that, glue the bones according to the time. Attach fasteners and everything, the product is ready.