"The woman is created for a man, not a man for a woman" - such a postulate ...
![That in Rus was waiting for their wrong wives](https://i0.wp.com/s.mediasole.ru/images/709/709700/2.jpg)
Electromagnetic valves provide the easiest way to control and regulate liquid flows and gaseous media. Electromagnetic valves are an ideal solution in the case of using a limited impurity content of impurities and with a wide range of flow rate, from low to high values.
The mounting system of the coil with a latch makes the valve mounting simple and reliable. If necessary, you can order a hermetic seal that protects against moisture penetration.
Wide nomenclature of coils with the degree of protection against IP00 to IP67 provides optimal technical solution For various applications.
Controlled depreciation at the final closing stage, the optimized form of the membrane and the leveling holes reduce the hydraulic impact value in all valves of Danfoss's production up to 1.5 bar (in accordance with the standard EN 60730-2-8, test pressure 6 bar).
The valve service life is significantly increased due to the special form of the membrane, which contributes to a decrease in the level of internal stresses in the rubber. In addition, this particular form of a diaphragm provides optimal consumables.
Coaxial filter protecting the valve control unit has a self-cleaning function. The leveling hole is easily cleaned from dirt in case of clogging.
We offer considerable one valves Danfoss., best models Which can be found in the GSKM catalog. The valve is an electric shut-off valve. It is used in heating systems And everywhere where there is no possibility of manual feed / disable liquid or gas. We have available valves of the Danfoss Danfoss brand, which can be used in watering, sewage systems, boilers, expansion and washing systems.
Selectsoleneenoid valve, pay attention to the type of attachment, body material, coil resistance. Here you will find valves operating in a variety of systems, including zero pressure.
By purchasing valves in the GSKM company, you get the following benefits:
Specialists around the world choose Danfoss, and the reliability of the valves always amazes. There is a decrease in emergency risks, and all the equipment is quite accessible and economically in use.
Colenoid valve, with its unusual name, in an ordinary alignment causes different associations. At the very case, this is an ordinary shut-off crane, only improved, instead of its opening it, it turns on automatically through the timer or when you press the switch connected to it. Why nevertheless he is salty.
Electromagnetic (Solenoyad) Valve is an electromechanical device that serves to open and overlap the stream needed to work - liquid or gaseous. It is designed from two components: solenoid (electromagnet) with an iron core and an ordinary valve with a hole, for a flow of liquid or gas, and parts in the form of a disk or piston, for stream constipation. When feeding the power coil, the core under the influence of the resulting magnetic field It is drawn into inside, the system opens or closes.
According to structural features, they are divided into normally open or closed. It depends on how the current is supplied to the coil. I wonder what is fine open valveIf the current is supplied to it closes, and a normal closed valve, on the contrary, opens.
One of the manufacturers of such reinforcement is Danfoss. Many enterprises are successfully used by many enterprises in a wide variety of industries.
The area of \u200b\u200btheir application is very diverse. Danfoss valve direct action has no big sizesmaking it use popular in the most different areas Industry. For example, they are installed in liquid and suction lines, equip the hot gas pipelines with fluorine-containing refrigerants.
The Danfoss regulatory valve is used in heat supply, heating and cooling pipelines. It can limit the flow rate of the working medium, locating the passage of the fluid when the flow level approaches the setting, the installed adjusting diaphragm holds the denoted pressure drop.
The material from which is made by the hulls are chosen on the basis of in addition to the industry it will be applied - in aggressive or neutral. Due to special alloying additives, the case materials of the body has high corrosion resistance. Colenoid coils are manufactured by explosion-proof and intrinsically safe, which makes them safe for refrigerants and oils, various fuels or gas.
Therefore, the Solenoid Valve Danfoss found wide application In domestic systems of heat and water supply, as well as in centralized air conditioning networks. This is due to the fact that, having an acceptable price, akin to others, is significantly ahead of them in quality and strength.
The Danfoss Solenoidal valve is universal and solves almost any tasks for the flow of fluid and gas flow. Its work does not depend on the pressure drop in the system, having a seal reliable when working with water, air and butter. The mechanism has high level Opening even with zero pressure drop.
The Danfoss electromagnetic valve gives the best harvesting of hydraulic shocks among the existing competitors. This leads to a decrease in noise and vibration, and also extends the service life of the remaining parts - which ensures the reliability of the system. The advantage of it is a combination price - quality.
This article discloses only the main aspects of this product of Danfoss. Discover complete characteristic and necessary technical information You can contact our company, engaged in selling this product, which is certified by European standards. Therefore, the data of the solemade valves is reliable, over a long service life.
The hulls and coils of the Danfoss electromagnetic valves are usually shipped separately, and they are collected in place.
The assembly is performed quickly and easily, without the use of tools, than the optimal flexibility of structures and their readiness to work. Replacing the coil is made without stopping and drainageing the system.
On request electromagnetic valves Can also be supplied in the assembled form.
Danfoss has developed an attractive EV251B valve for solving almost any fluid flow management tasks in industry. More than 90% of applications, you will receive additional benefits using the EV251B series valves.
The selection of the valve is extremely simple: you need to know only the size of the pipe and supply voltage. The valve will provide impeccable work regardless of the presence of a pressure drop in the system.
EV251B provides the best damping of hydraulic shocks among all competitors. This gives not only a decrease in noise and vibration, but also an increase in the service life of the rest of the components is what is needed for the reliability of the system.
The EV251B valves are supplied assembly with a coil and a plug and seals of the NBR type, which are suitable for water, air and oils.
Main advantages:
EV210A - large group two-position two-way electromagnetic valves of direct action, characterized by small sizes intended for use in industrial equipment. Compact design in combination with an extensive set of coils allows the use of EV210A in a wide variety of industrial applications.
EV220A - a series of compact two-position two-way electromagnetic valves of indirect action with a servo, specially intended for use in machines and equipment with limited space.
EV220A - a series of compact two-position two-way electromagnetic valves of indirect action with a servo, specially intended for use in machines and equipment with limited space. The built-in replaceable filter provides long-term uninterrupted operation even if there are impurities in the working environment.
EV310A is a large group of small two-position three-way electromagnetic valves for direct action intended for use in industrial equipment, for example, as control valves.
EV210B is a large group of two-position two-way electromagnetic valves for universal use. EV210B - a series of extremely reliable valves with high operational characteristicswhich can be used in harsh operating conditions.
EV220B 6-22 is a group of two-position two-way electromagnetic valves with a servo drive with a threaded connection from 1/4 "to 1". This group is intended, in particular, for manufacturers of serial equipment, requiring strength with moderate flow values.
EV220B 15-50 is a group of universal two-position two-way electromagnetic valves of indirect action with a servo. The valve body made of ordinary brass, from brass, resistant to selective corrosion or stainless steel, provides the ability to use in the most different areas. Built-in control circuit filter, adjustable closing time and protection class to IP67 provide optimal performance characteristics even in critical conditions.
EV220B 65-100 is a group of two-position two-way electromagnetic valves intended for use in powerful industrial installations with high flow values. Features of such a valve - cast iron case and flange compound. The design, protected from the hydraulic impact, and the built-in filter control circuit ensure reliable operation for a long period.
EV222B is a group of electromagnetic valves of indirect effects with a servo, intended for use with contaminated or aggressive media. Made of stainless steel The valve body, an insulating membrane that protects the electromagnetic system from dirt, the built-in control circuit filter, adjustable closing time, as well as the protection class to IP67 provide reliable and successful operation.
EV224B - two-position two-way electromagnetic valve high pressure, indirect action, with a servo, is intended for use at operating pressure up to 40 bar and the temperature of the working medium to 60 ° C; It is proposed in normally closed and normally open. Vintage: Included in the Standard Supplies Integrated Control Filter, adjustable closing time, as well as security class to IP67 (depending on the coil) provide reliable and successful operation.
The EV250B valve with a forced lift can operate when the pressure drops from zero to 10 bar. This group of two-position double valves is intended mainly for use in closed circuits with a small pressure drop with average flow values. The valve body made of brass, resistant to selective corrosion, provides long term Services even when working in aggressive steam environments. The EV250B valve is compatible with the extensive series of Danfoss coils with an IP00 protection class to IP67. The temperature of the working medium is up to 140 ° C (low pressure pairs).
EV251B solenoid valve combined type equipped with a compulsory opening system and is great for closed and open Systems With low or unstable pressure, where there is practically no pressure drop. EV251B type valves are supplied with a coil and plug.
EV260B is a proportional (with a smooth characteristic) of two-way electromagnetic valves with a servo drive, with a threaded connection from 1/4 "to 3/4". By smooth control of the current, the coil anchor can be moved to any position in an anchor tube, while the valve is translated into any state, from fully closed to fully open. When the reel current reaches the maximum value, the valve is completely open.
EV215B is a two-position dual-step electromagnetic valve, intended for use in the applications associated with steam. The design is based on the use of a conventional Danfoss concept for direct valves with improved operational characteristics, but the valve plate is made of fluoroplast, which ensures reliable operation even when working with contaminated steam. The valve body made of stainless steel provides a long service life even when working in aggressive steam environments.
EV225B is a two-position two-way electromagnetic valve with a servo, intended for use in the applications associated with steam. Its design is based on the use of fluoroplast membrane, providing reliable operation even when working with contaminated steam. The body of the brass valve, resistant to selective corrosion, and valve seats made of stainless steel provide a long service life even in aggressive steam environments.
In our company you can buy valves (valves) Solenoid Danfoss from Denmark. Danfoss has plants around the world, including in Russia, so the delivery to the end user takes place in the highest possible time. The quality of valve performance is paid to high attention. Certification of solenoid valves on European standards makes their operation reliable, during the entire service life. Thanks to special alloying additives and the newest materials Valve housing is provided by high corrosion resistance. Installation of explosion-proof and intrinsically safe solenoid coils on electromagnetic valves (valves) makes them use safe for refrigerants, oils, fuel or gas. In the fuel and water electric valves, Danfoss can use special electromagnetic coils with different levels protection and minimum power consumption.
Production of Danfoss (Denmark)
The goods are certified. Warranty 1 year
Catalog of electromagnetic valves Danfoss - Download \u003e\u003e
For water, air, oil;
Case: brass; Membrane: NBR, on request EPDM;
Working temperature: -10 ... +90 o C;
vendor code | DN., | Thread, inches | K V., m 3 / h | ∆ P min , | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Valve (valve) Electromagnetic solenoid EV250BSpan. "NZ" is closed, in the absence of current; Span. "But" on request;
|