How to make a dynamite gun of different types in Minecraft? Cannon in Minecraft: creation and features.

Building a gun in Minecraft is a very difficult and responsible job. Therefore, in addition to materials, you will need a lot of time and patience. To build a TNT, you need to make a muzzle, prepare a bucket of water, repeaters, redstone and a button.

How to make a dynamite gun in Minecraft

To build a cannon, find a flat area. Keep in mind at the same time that the dynamite cannon cannot be moved, and therefore immediately select the location and direction you need for shelling.

Take the obsidian and place a structure ten blocks long with an empty row in the middle in the shape of the letter T in the chosen place. You will need to place a repeater on one side of the muzzle, and the other is needed more for beauty and symmetry (in principle, you can do without it) . For the muzzle of a TNT cannon, you can use not only obsidian, but also any other solid blocks.

Take a bucket of water and pour it into the resulting structure, add another block of obsidian on top of the bottom side of the T. After you put two more blocks on the cannon, you can remove the previous one. This is necessary so that when installing a TNT charge, you do not miss and block the flow of water. If water flows out of the cannon, it will stop cooling and explode.

Install repeaters on the structure and connect them with red dust, put a button. Two repeaters should have a maximum delay, the other two - a minimum.
To make a TNT gun in Minecraft of a different shape, you will need to experiment with the number and delay of repeaters, since the range of the projectile depends on their work.

Yes Yes. It already happened, you say. I won't deny but I will simply useful guide , which will be replenished different designs (more on that below) as the author wishes, to make a new design.

Why exactly my tutorial? - you ask.

I "play", namely, I have been building for almost 2 years - I will answer.

The minecraft world can't get bored if you know redstone(red powder\stone\wire) well. You can build interesting things, for example, such a gun, which I will discuss below...

If you are completely unfamiliar with red powder, then I recommend reading "lessons of red dust from the viceroy of this blog", nous, and we begin.

List of guns at the moment:

One-story simple cannon. Projectile flight 66 cubes

Multilayer cannon. Projectile flight 242 cubes

One-story simple cannon.

To create this design behind your back in your backpack you need to have:

x28

Bucket with water x1

red dust x14

Repeaters x10

Button x1

Dynamite x7

Any half block x1

1.

2.

3.

4. Repeaters to battle! We lay repeaters and expose maximum delay. We arrange everything as in the figure:

5. Button. We arrange it as in the figure:

6. Dynamite bookmark. You must leave one block of water for what to (under the spoiler for the unenlightened).

Dynamite has the ability to deal only damage in water without damaging nearby blocks.

I hope I wrote everything correctly. Video with this design:

Multilayer cannon.

In order to erect this cannon, you will need:

Any material, preferably fused stone x78

Bucket with water x1

red dust x39

Repeaters x10

Button x1

Dynamite x19

Any half block x1

1. We arm ourselves with melted stone and build two parallel lines of 12 blocks each and we finish them, as in the figure below:

2. I hope you didn't remove the melted stone? We need 3 more blocks of stone, water and one half block. We are trying to do everything in the same way as in the figure:

3. Here we need fourteen red dust. We arrange everything as in the figure:

4. At this stage, we will have to use the stone again. We lay repeaters and set the maximum delay. (if desired, you can put a semi-block, which will prevent accidental placement of dynamite on a water source)

Minecraft has devices that can play the role of guns, that is, artillery. They are completely immobilized, and their field of view is negligible.

An experienced player will be able to position the device as efficiently as possible, and the best masters- to make devices that facilitate the work with these tools.

Cannon in Minecraft

Cannons are designed to fire various projectiles at a distance. Most often, these are TNTs that can be launched using physical force. Often, the explosion of other TNTs is also used to launch.

The greatest range of uses for weapons is found in confrontations in the network game mode, but they are useful in other situations as well. Consider how to make a TNT gun in Minecraft.

Cannon making

Greatest Benefit guns are brought during sieges or defensive actions.

The design of the gun consists of two main components - the charge and the projectile. The charge is what propels the projectile. Often, several blocks of TNT are used for this purpose, which simultaneously explode with the help of red dust.

You need to be careful with projectiles, they should be activated after the charge, but before launch and explosion.

When deciding how to make a gun in Minecraft, take care of some supplies. To do this, use various solid blocks - grass, earth, cobblestone, boards - and any metal ones.

It is recommended that the materials be as blast resistant as possible - this will affect the durability of the gun. As practice shows, the most durable and at the same time available material is a stone.

The dimensions and structural features of the gun are determined by the number of charges. Usually an even number is used, but no more than eight.

Depending on the number of charges and their location, as well as the design of the gun, firing can be carried out different ways. In some cases, the shot will hit large area, in others the projectiles will go on a hinged trajectory, and in others the explosives will fly a long distance.

Based on the situation, players can upgrade the cannon in the following ways:

1. Install an automatic recharge system.
2. Provide correction.
3. Provide for the possibility of launching projectiles of a different type.
4. Set up fortifications.

In pursuit of aesthetics, the gun may lose performance characteristics. This should not be forgotten during construction.

Conclusion

We have considered a method that allows you to create a cannon in Maine that will fire TNT charges. This useful device will allow you to have fun.

Video: How to make a TNT gun in Minecraft.

Minecraft is good because you can be here not only a miner, extracting various resources, or even a warrior, protecting yourself and your virtual property from hostile mobs and griefers. You can also have your own park if you wish. military equipment, which will work in virtually the same way as in real world. Moreover, for many types of such machines, special mods and plugins are not needed. For example, for a gun that you are free to make at any game moment.

You will need

• - cobblestone
• - redstone dust
• - repeaters
• - button
• - water
• - red torches
• - dynamite

Instruction

The construction of such a weapon is a very ambitious and difficult task. Keep this in mind when you decide to tackle it. Select materials for such a product depending on what kind of gun you want to see in the end. However, in any case, you will need solid blocks (for example, cobblestone) - for its body, water - to create some kind of cooling mechanism, a button - to start, redstone dust (like wires) - an indispensable element of any circuits, red torches, repeaters (given considerable building scale) and dynamite as a charge.

You can make torches easily - from wooden sticks and red (Redstone) dust. Just place the last unit on the workbench over one stick - and the product is ready. Without much effort, you will also get a button: put a block of stone or planks (preferably the first) in the central slot of the machine - and that's it. Collect water from any source using a pre-crafted (from three iron ingots) bucket. Keep in mind that you scoop it up by pointing the bucket at the solid block below it.

Making a repeater will require much more effort and a lot of materials from you. For it you need two red torches, redstone dust and three stone blocks. Place the latter in the bottom horizontal row of the workbench, place redstone dust in its central slot, and torches on the sides of it. Keep in mind that for the construction of the gun you will need not one such device, but about four (since the signal of the red stone extends, as you know, only a dozen and a half blocks, and your gun will be larger).

First, make a trunk: lay out a rectangle of cobblestone on a flat piece of land about three by seven blocks, but so that in its center there is a "ditch" five long and one cube wide. Fill it with water, letting it in from one of the edges (so that its level in the recess is uneven). It is from the side where you poured it, put two more cobblestones. One will hang over the liquid, and the other will be above the block of the short side of the base adjacent to it - install a button on it in front, and a red torch on the side.

Next to this light source - along the long side of the future cannon muzzle - place four repeaters close to each other. On the opposite side - start a path of redstone dust (this will be a wire). Where the repeaters are located (right next to the last one), place a cobblestone and stick a red torch into it from the side. You can make some superstructures of solid blocks above the muzzle of the gun (in order to give it a certain resemblance to the real one), but they will not have a functional value, but will only be decorative elements.

Load the cannon with dynamite, having previously made it from five units of gunpowder (they are installed on a workbench in checkerboard pattern, but so that one of them will certainly end up in its central slot) and four blocks of sand (fill the remaining cells with them). To do this, place the TNT in the muzzle above the water chute. Fire the gun using the button as a trigger.

In Minecraft, guns are weapons that throw various things at a distance, for example, dynamite. According to their principle of operation, the guns from the game are very similar to real counterparts, but external differences cardinal. Most of guns are stationary, that is, they cannot be moved - they are statically fixed to the place where they are installed.

The Archimedes Ships mod allows you to install cannons on ships, so information on how to make a cannon in Minecraft on a ship will also come in handy.

simple cannon

The regular cannon fires dynamite, and to create it you will need to collect red dust, a bucket of water, solid blocks (obsidian is ideal) and repeaters that will pause until the TNT explodes. You will need 4 repeaters.

This gun is created without mods, and is stationary, that is, it cannot be moved. From this it follows that you need to correctly choose a place for its installation. Having chosen a site, we build a foundation from the blocks in the shape of the letter “T”, which should be hollow inside. After that, we take a bucket of water, and pour it out, and back we block the foundation with a couple of blocks so that the water does not stop flowing at the time of installation of the TNT.

After that, repeaters are installed, connected by red dust. The final touch in creating a simple gun without mods is the fastening of a button that starts the whole mechanism. You just have to put TNT in the hole, and put one block of dynamite as a projectile, loading the cannon.

Enhanced Cannon

If the creation of an ordinary gun did not cause any difficulties for you, and you want something more powerful, then it's time to start improving the gun. From the resources you will need sand, pistons, as well as red dust to connect them. For the most clear understanding of the process, we recommend watching a video in which everything is well shown.

Alternative to the dynamite gun

This model is built from obsidian, a redstone torch, and of course, the dynamite itself.

A pillar is built from the blocks 5-10 blocks high and only 1 wide, after which a 5x5 platform is erected on it (more is possible, but not less). On the platform we lay out TNT in the amount of 8 pieces in the form of a 3x3 square. Made? We place a torch in the middle and that's it, the gun is ready! The principle of operation is simple: 4 TNTs detonate upon contact with the torch, and as a result, the remaining 4 take off into the air.

portable gun

Creating a portable gun in the game is impossible without mods, in particular, you need to modify Balkon's Weapon. If the mod is installed, then you can check if you have everything you need to create a portable gun. You should have 4 iron ingots, a stone to create cores, wood and a lighter. Do you have all the resources? We place them on the workbench, alternating correctly, and voila - the portable gun is ready! The ammunition of such a weapon is 4 cores, but in order to successfully shoot, you will need more gunpowder.

Nice bonus - machine gun

The machine gun is the most expensive type of small arms in terms of resources, and it's not even a cannon, but the barrel is still very interesting. To create it, you need to have a lever, a dispenser, seven redstones, four torches, and the same number of solid blocks. Arrows or bullets are used as cartridges.

Creation begins with the installation of two blocks - this is a stand for the future machine gun. A dispenser is installed on it, facing the future target. Next, we go to the back of the pedestal, take two steps back and install all the remaining blocks on the side.

After that, we attach torches to them, one at a time in front and behind. The next stage is the most difficult - the installation of redstone blocks. The rate of fire of the gun depends on how correctly you place them, so it's worth watching the video. Finishing touch- setting the lever at the end of the machine gun in the off state. The lever is a trigger that can be safely released as soon as you load the ammunition into the dispenser hole.

This completes the guide. If you have any questions - write in the comments.