If you adhere to proper nutrition, then avocados are probably in ...
Submit an inquiry
They bear the “Made in Germany” mark, the quality mark of GOK Regler- und Armaturen-Gesellschaft mbH & Co.
GOK pressure regulators is a modern equipment for reducing the pressure of liquefied gas, which is made in Germany from high quality components and materials.
The most widely used in Russia are gas pressure regulators used in systems autonomous gasification private houses: these are second-stage regulators for systems with spaced reduction and two-stage GOK pressure regulators with a capacity of 12 and 24 kg / h for a gas tank.
Gas pressure regulators for GOK gas tanks
Gas pressure regulator GOK BHK/K EFV with maximum safety
In autonomous gas supply systems for private houses, two-stage pressure regulators, which are a combination of pressure regulators of the first and second stages, have found the greatest use. These GOK gas reducers are designed to reduce the high pressure of the LPG vapor phase taken from the gas tank and maintain the low outlet pressure within the specified limits. GOK gas pressure regulators provide reliable reduction, stable outlet pressure and uninterrupted gas supply even in the most severe frosts.
Regulator GOK BHK/K EFV
AT gas pressure regulator GOK BHK/K EFV embedded safety relief valve (PSK), relieving outlet pressure when it rises as a result of heating of the gas pipeline or a malfunction of the reducer, and combined safety shut-off valve (PZK), triggered by an emergency increase (OPSO) or decrease (UPSO) pressure. This type of regulator provides the maximum level of safety for the autonomous gas supply system.
GOK 052- these are those unpretentious "red gearboxes" for a gas tank that work stably in any frost. In the regulator with a capacity of 12 kg / h, only the PSC is integrated, and in the version with a gas flow rate of up to 24 kg / h, in addition to the PSC, an overpressure shut-off valve (OPSO) is integrated.
EUROBALLON offers GOK gas reducers on the favorable conditions. We have presented high quality products which is made in accordance with international standards. The German brand GOK has established itself as a reliable manufacturer of automatic control technology for LPG. The manufactured products have long term services, is distinguished by reliability and absolute safety.
Purpose of gas reducers
A gas reducer is equipment that serves to control the gas pressure at the outlet of the cylinder. In some cases, it can be used to reduce the pressure inside the tank. Without it, the gas consumption when opening the cylinder will be too large, moreover, this can lead to its leakage.
used this species equipment in various fields. At enterprises, gearboxes are necessary for autogenous work. They are also used in the construction industry and in everyday life for gas stoves.
With the help of GOK reducers, a stable pressure is maintained at the outlet of the tank, regardless of its temperature. Thus, the load on the gas supply devices is prevented.
Presented assortment
The catalog of our store contains the following models of GOK gearboxes:
- Adjustable (25-50 mbar). This copy is connected to a cylinder with a valve of the European standard, while there is no need for an additional adapter. Most often it is used for gas installations like stove, heater, water heater, generator, etc. The advantages of this model include simple design, reasonable price and high quality. Special attention deserves the fact that the equipment is completely safe and can operate at low temperatures;
- EN 61-DS with outlet pressure 30 mbar. It is equipped with an overpressure safety device. Thus, unacceptable pressure on the device to which the reducer is connected is excluded;
- Reducer for cylinders 37 mbar. This model is designed to reduce the high pressure in the cylinder to 37 mbar. It is more appropriate to use it for gas appliances power of 14 kW or less. It is perfect for gas stoves, water heaters and other equipment;
- Reducer with two outputs 50 mbar. It is designed to reduce pressure up to 50 mbar. The peculiarity of this model is that it has two outputs. Each of them has a valve. A gearbox with two outputs is used in various fields activities, for example, to connect two gas appliances at home or a cafe. It is used for gas convectors and refrigerators, as well as for other equipment with a consumer power of 4 kW.
The cost of the GOK reducer depends on its design, type and technical parameters. Our company offers a decent selection of gas equipment, so finding a suitable model will not be difficult. To place an order, just contact our manager, or move the order to the basket.
GOK gas reducer FOR COMPOSITE CYLINDER
Pressure stage PS 16
Inlet pressure p 0.3 - 7.5 bar , 0.3 - 16 bar bzw.1 - 16 bar
Nominal outlet pressure pd 30 mbar, 37 mbar, 50 mbar
Guaranteed consumption Mg 0.8 , 1.0 , 1.2 or. 1.5 kg/hour
Operating temperature range: -30 to +60 °C
Response pressure PSK 135 mbar-15 mbar
Body material: zinc alloy
Inlet fitting material: brass
Membrane/seal material: rubber
Country of origin: Germany
All composite cylinders must only be used with a reducer.
This reducer of the German company GOK has a European KLF connector and is well suited to valves that have a pre-installed gasket.
The fundamental difference between modern European gearboxes:
The nut on the GOK gearbox with KLF connector is tightened by hand without effort
No need to worry about changing the gasket on the gas cylinder, on the composite cylinder the gasket in the valve is designed for 10 years of use
Purpose of the GOK gas reducer
In installations with small cylinders in the room, a regulator with thermal protection and a safety reduction device can be used.
For indoor use
Used to connect gas heaters, gas convectors and stoves.
Shipping and payment
Our couriers carry out home delivery, to offices, apartments and transport companies in Moscow and the Moscow region.
Delivery in Moscow:
The standard cost of delivery by courier in the city within the Moscow Ring Road is 450 rubles.
Orders are delivered from 10:00 to 18:00 on weekdays. Evening orders are negotiated individually.
Delivery outside Moscow:
The cost of delivery by courier is 20 rubles - 1 kilometer, plus delivery of 450 rubles in Moscow.
Orders are delivered from 10:00 to 18:00 on weekdays.
Pickup:
You can independently pick up the goods you like at our office at the address: Moscow, st. Baikalskaya 1.
Before arriving at the office of the company, it is necessary to coordinate the availability of goods in the warehouse!
Delivery across Russia
Delivery is carried out by transport companies auto, air or by rail from Moscow to any region of Russia. Delivery times and costs may vary depending on the shipping method you choose. The cost of delivery by region also depends on the weight and volume of the equipment you ordered. We recommend that all our regional customers proceed as follows:
- After choosing the product you are interested in, place an order for it on our website.
- In the "Comment" column, indicate your wishes regarding the order, if any.
- After placing an order, our manager will contact you and discuss the details of payment and delivery.
- After confirmation of payment by our bank (24-48 hours), in case of payment by electronic money, the funds instantly come to our account, your order will be sent by a transport company.
Upon receipt of the goods at the destination, you must:
- Have your passport with you individuals or a power of attorney (seal) from the recipient company, if the order was placed for the organization.
- Check the quantitative correspondence of the actually issued cargo and that specified in the bill of lading.
- Check the integrity of the packaging, the presence and integrity of the adhesive tape with the marking of the carrier company, the absence of mechanical damage on the packaging of the cargo.
- In case of detection of the above damage, it is necessary to draw up an act or a claim to transport company and notify the manager of the online store.
Cash
This payment method is available at our office in Moscow or upon delivery in Moscow and the region, for organizations it is obligatory for the recipient of the order to have a power of attorney or seal of the organization. cash receipt can be obtained from our office or by mail after completing your order.
Bank transfer
Payment on the Sberbank card. The most popular payment method outside the Moscow region. You can pay at any branch of Sberbank of the Russian Federation or other banks providing such services, as well as at branches of the Russian Post.
german GOK company(GOK Regler- und Armaturen-Gesellschaft mbH & Co. KG) was founded in 1968 and is currently the leading designer and manufacturer of gas distribution equipment in Germany. The company's products are used in both household and industrial appliances and gas supply systems. All research, production and sales divisions of GOK are located in Marktbreit near Würzburg, so the definition of "German quality" can be safely applied to all products of this company.
From GOK products on Russian market presented:
- gas pressure reduction equipment;
- equipment for gas balloon installations;
- shut-off and safety fittings for gas holders;
- components and accessories for gas distribution equipment.
GOK gas pressure reducing equipment
GOK gas pressure regulators, also called gas reducers, are used to reduce the high pressure under which liquefied hydrocarbon gas (LPG) vapors come from cylinders or gas tanks to a pressure acceptable for the operation of gas stoves, boilers, fireplaces, water heaters and other gas appliances.
The list of gas reducers manufactured by GOK includes first and second stage pressure regulators, two-stage reducers for gas tanks, as well as domestic reducers used independently, for connecting an LPG cylinder directly to household appliances, and as part of gas-cylinder installations.
Reduction of gas pressure from cylinders to low pressure is carried out with the help of one-stage GOK regulators. Gas reducers are supplied to Russia for both steel and composite cylinders.
The decrease in pressure of gas vapors taken from gas holders occurs in two stages. First high pressure drops to an average level of 0.5-2.5 bar, and then to a low level, usually 37 or 50 mbar. This is done either with one two-stage gearbox, or with the help of two gearboxes - the first and second stages.
Two-stage reducers are used where the distance from the gas source to the end consumer is relatively small. The spaced method of pressure reduction is used in long and branched networks with high gas consumption. This is due to the fact that the throughput of the pipe directly depends on the pressure and its length, and when installing a two-stage gearbox on a gas tank, such networks would have to be created from pipes of a large cross section. When using spaced reducers, the first stage pressure regulator is connected to the LPG tank, and the second stage reducer is installed next to the consumer. Thus, not low, but medium pressure gas is transported through the pipeline.
Safety valves in GOK gearboxes
GOK gas reducers use safety relief valves (PSV) and safety shut-off valves(PZK). They protect the equipment from overpressure gas. The relief valve lets gas out of the gas pipeline until the pressure drops to normal, and the shut-off valve stops or limits the flow of gas from a cylinder or gas tank.
The shut-off valve does not always have time to respond quickly to a sharp pressure jump, but the disadvantage relief valve is that when it is triggered, gas is released into the atmosphere. If the amount of vented gas is small, this is not a problem, but if a large foreign particle enters or is damaged by the regulator's pressure reducing valve, the release of gas can be significant. A gas reducer equipped with safety valves of both types is free from these disadvantages.
GOK also manufactures equipment for gas cylinder installations - systems of two or more liquefied gas cylinders that provide long-term and uninterrupted autonomous gas supply. The basic principle of the GOK gas-cylinder installation is the use of two so-called arms - the main and the backup. When the gas in the cylinders of the main arm runs out, the system switches to the backup. Thereafter empty cylinders can be disconnected and replaced with refilled ones. So the main shoulder becomes the reserve, and the reserve - the main.
The main difficulty in implementing this principle is to switch the arms without interruptions in the gas supply and pressure surges, which can cause failures in the devices connected to it, or even completely disable them. For this, a special switching valve (valve) and a gas pressure regulator equipped with a PSK are used.
The switching valve can be manual or automatic. The automatic valve itself switches gas extraction to the reserve arm when the pressure drops, mainly below threshold, and when using manual, you need to follow this yourself. The gas pressure regulator included in the GOK gas cylinder system automatically maintains a stable low pressure at the outlet of the system, regardless of gas flow, fluctuations in inlet pressure and temperature. This ensures a continuous gas supply with constant parameters.
From two to ten cylinders can be included in the GOK gas-cylinder installation - 5 in each arm. Cylinders can be connected as flexible hoses, and a collector from metal pipes. The GOK product range includes a variety of connectors, hoses, bends, tees and other accessories that allow you to create a cylinder system of the desired configuration.
GOK equipment for gas tanks
In assortment shutoff and safety valves GOK includes a number of valves that provide convenient and safe operation gas holders:
- filling valves;
- LPG liquid phase selection valves;
- LPG vapor phase selection valves;
- safety valves.
GOK parts and accessories
Stop valves GOK includes devices that shut off the gas supply. It includes thermal shut-off valves blocking the gas pipeline in case of fire, the main shut-off valves installed at the entrance to the house, solenoid valve controlled remotely.
it is used almost everywhere where gas equipment is installed, namely in combustible or inert gas devices. The most common is the gearbox for a gas cylinder. In the people, he received the name "frog". It is especially in demand among owners of autonomous heating, for whom connection to a centralized gas supply is impossible for one reason or another. Connecting directly without a "frog" can lead to disastrous consequences. This is especially true for cylinders with compressed gas, which is under a pressure of 250 bar. The cost of a gearbox for a gas tank can be ten times less than the cost of eliminating the consequences of a possible disaster. Familiar with gearboxes and motorists whose cars are equipped with gas equipment. Liquefied or compressed gas in the car mechanism passes through the propane-butane / methane mixture reducer, and only then enters the carburetor / injector. In industry, such a gearbox is used at the transition points from large gas pipelines to local networks. It is in such cases that a significant reduction in pressure is needed. Reducers are classified according to:. bandwidth; . gas pressure at the inlet; . working pressure; . mass. Moreover, all types have a fundamentally similar device. They differ only in the dimensions of their parts and structural details. "TD Leader" offers high-quality gas reducers for gas tanks different types. Each product has a certificate of quality and an acceptable price. You can get answers to your questions and help in choosing a device from our managers by calling them at the numbers listed on the site. We are always glad to new customers!
