Virtually no therapy will be effective without the use of some form of water. Water itself has unique properties and can enhance the effect of many drugs.

For several decades, activated liquid, which is obtained by electrolysis, has been used to treat many diseases. Depending on the processing method, live (catholyte) and dead water (anolyte) are isolated.

Has healing properties living water, cooking which is possible even at home. The dead one is used in complex therapy and is used as a disinfectant.

After reading the article, you will find out:

The benefits of living water

Science has proven positive the influence of living and dead water on living organisms... This is due to its alkaline properties. At the catholyte - big number negatively charged particles and a weakly alkaline environment. Anolyte is characterized by the presence of positively charged particles and an acidic environment with a low Ph value.

Catholyte believe healing liquid. The healing properties of living water used to get rid of various diseases. Its action is expressed in the following:

• stabilizes pressure;
• enhances immunity;
• helps to cleanse the body of toxins and toxins;
• improves the work of internal organs.

With constant exposure to living water there is an improvement in the condition in such serious diseases as stomach ulcers, osteoporosis, psoriasis. In addition, the liquid is used in cosmetology. Its regular use can cleanse the skin of the face and leave the hair shiny and soft.

Dead water is more often used for disinfecting surfaces and treating skin inflammations.

Industrial devices for the preparation of living water

There are dozens of modern models to activate the liquid. Main in the use of devices is the device device... Usually the equipment body is made of plastic, the wires are metal. When using platinum or gold, the cost of the activator increases, but the quality of the device is higher.

Most devices today activate both living and dead water, and work from the electrical network. The process itself takes half an hour. average cost high-quality device - 4 - 5 thousand rubles. In the presence of additional functions such as liquid cleaning, the price may be slightly higher.

Diy apparatus of living and dead water

If you do not want to spend money and are confident in your abilities, use the instructions, how to make living water at home... The device has enough simple design... To make the device you will need:

• glass jar;
• dense fabric;
• two wires.

A small bag is made from a piece of cloth that does not allow liquid to pass through and placed in a jar. It should be tightly fastened. It is better to take wires from of stainless steel... The first is placed in a jar, the second in a bag. You can fix the electrodes using a nylon cover. The opposite ends are powered from the electrical network, after which water is poured and the device is turned on.

You can use a different assembly scheme. In this case, not a cloth bag, but two containers are used. They must have straight edges, so cans are not suitable for this purpose. The electrodes are placed in different containers, and contact is provided between them. The device will produce two types of liquid at once - catholyte and anolyte.

Living water at home may take a little longer to cook, but the quality will not be inferior to that obtained using a store-bought appliance.

Unconventional ways to obtain living water

Healing liquid can be obtained without using activators. It may not be as effective, but it will have an effect on certain diseases. At home, you can prepare catholyte using freeze recipes. Cooking living water in several ways:

1. Freeze water in a saucepan. It is better to use commercially available bottled water or filtered water. Pour a full pot and place it in freezer... Wait until a thin ice crust forms on the surface and remove it. Then pour the water into another container and return to the freezer. This time, wait until two thirds of the total freeze. Drain off any water that is not frozen. The remaining ice is the same catholyte.
2. If you do not have much time, you can use more fast way... Pour the liquid into a glass or ceramic beaker and place in the freezer. When the water turns to ice, remove it from the glass and rinse cold water... Then leave the ice at room temperature and let it melt 2/3. This will be the activated water. Discard the rest of the ice.

When frozen, impurities harmful to humans are the first to solidify. After carrying out such procedures, the liquid receives healing properties.

In order for the catholyte to bring maximum benefit, use tips for improving live water. The main rule is that the activated liquid cannot be stored for a long time. It is best to prepare it just before consumption. If you activated the water 2 days ago, prepare a new one, as the alkaline environment has already changed and the solution is unlikely to benefit the body. Anolyte can be stored a little longer, but only in a tightly sealed container.

Do not forget that during hydrotherapy you need to follow certain rules:

• if you use both catholyte and anolyte, take a two-hour break between using them;
• in between, you can drink compote or tea;
• use the activated liquid for prophylaxis, it will improve the condition of the body.

The use of living water

Do not drink a cold solution. Before use, it must be warmed up to room temperature. However, do not put the liquid on the stove, much less bring it to a boil. Better to let her warm up in normal conditions to preserve the beneficial properties. Drinking living water depends on the diseases that it is designed to cure.

Malakhov purification system

A popular healer is sure that with the help of an activated solution, you can cure almost any disease and rid the body of toxins. Recipes by Gennady Malakhov:

• in case of liver problems, the healer advises to consume 2 tablespoons inside every 20 minutes. living water, and before going to bed, drink another half glass of dead;
• joint diseases can be healed with anolyte compresses. They are applied to the site of inflammation for 20 minutes;
• the system of cleansing the body includes fasting, during which only activated water can be consumed. You need to drink 3 tablespoons. catholyte every half hour in the first half of the day, and in the second - drink anolyte according to the same scheme. Boiled water can be consumed before bed. This scheme is followed during the day.

Dentistry

For the treatment of oral diseases such as stomatitis, periodontal disease, stones on the teeth, you need to rinse your mouth with an activated solution after each meal. It is also recommended to use charged water when brushing your teeth. With a regular procedure, you can get rid of the unpleasant manifestations of the disease in a couple of days.

Ophthalmology

With the appearance of barley, conjunctivitis and others inflammatory processes you need to wash your eyes with warm anolyte. After that, compresses with catholyte are made. Treatment is continued until symptoms disappear.

Gastroenterology

The charged solution is used in complex therapy for gastritis, peptic ulcer stomach and duodenum and gastrointestinal inflammation. Living water helps reduce acidity and improves appetite.

Contraindications

There are practically no contraindications to the use of the activated liquid. An alkaline solution is used with caution in diseases of the genitourinary system and diabetes mellitus... It is better to consult a specialist before use.

You can choose an activator from a wide variety of devices on the market. In this case, there will be more confidence in the quality of the resulting solution. However, your home device will serve you faithfully. Do not forget the main rule when using living and dead water - treatment or prevention should be carried out on an ongoing basis.

Bookmark this site

Living and Dead Water

Kratov. Handbook of traditional and alternative medicine

In early 1981, the author * of the device for the preparation of "live" and "dead" water fell ill with inflammation of the kidneys and adenoma of the prostate gland, as a result of which he was admitted to the urology department of the Stavropol Medical Institute. I spent more than a month in this department. When he was offered an adenoma operation, he refused and was discharged. While still ill, for 3 days he completed the device for obtaining "living" and "dead" water, about which an article by V.M. Latyshev was published in the journal "Inventor and Rationalizer" for 1981 - 2 under the heading " Unexpected water ", and there was an interview of the special correspondent Y. Yegorov with the academician of the Academy of Sciences of the Uzbek SSR Vakhidov under the title" Activated water is promising ".

He conducted the first test of the obtained water on an unhealed wound for more than 6 months on his son's hand. The test of treatment that was carried out surpassed all expectations: the wound on the son's hand healed on the second day. He himself began to drink "living" water, 0.5 glass before meals, 3 times a day and felt cheerful. The adenoma of the pancreas disappeared within a week, sciatica and swelling of the legs disappeared.

For greater persuasiveness, after a week of taking "live" water, he underwent an examination in a polyclinic with all analyzes in which not a single disease was found, the pressure returned to normal. Once his neighbor scalded her hand with boiling water, a third-degree burn. For treatment, she used the "live" and "dead" water he received, and the burn disappeared in 2 days.

The son of his friend, engineer Goncharov, had gum festering for 6 months, and an abscess formed in his throat. Application different ways treatment did not give the desired result. For treatment, he recommended water: rinse the throat and gums with "dead" water 6 times a day, and then take inside a glass of "living" water. The result is a complete recovery of the boy within 3 days.

The author examined more than 600 people with various diseases, and they all went on the mend with the activated water treatment. Below is a description of a device that allows you to get "living" (alkaline) and "dead" (acidic) water of any strength. The test of water in the laboratory of the Stavropol Vodokanal ("live" - ​​fortress 11.4 units and "dead" - 4.21 units) showed that the fortress decreased by hundredths of a unit in a month, and the temperature does not affect the decrease in water activity ...

Tests of activated water by the author on himself and on family members and many people made it possible for the author to draw up a practical table of procedures for treating a number of diseases, determine the timing of treatment and trace the course and nature of recovery.

The use of "living" and "dead" water for the treatment of a number of diseases

"F" - Living water. "M" - Dead water

Note: when only "F" water is consumed inside, thirst arises, it must be quenched with compote or acidified tea. The interval between doses of "M" and "F" water should be at least 2 hours

Sketch. - A device for obtaining "live" and "dead" water. Electrode - 2 pcs. stainless steel 0.8x40x160 mm. Capacity - 1 liter. Time is 3-8 minutes.

Taken liter jar, 2 stainless steel electrodes, distance between them 40 mm, do not reach the bottom; stainless steel measuring 40x160x0.8 mm.

The process of preparing water lasts 3-8 minutes, depending on the required strength. After cooking, disconnect the plug from the mains and take out the device, quickly pull out the bag and pour the "M" water into another dish.

Living water (alkaline) (-) - Dead water (acidic) (+). "Living" and "dead" water - life without disease!

Almost every one of us was read fairy tales in childhood, and we remember well the stories about "living" and "dead" water. In secret, any child dreamed of finding out where these magical liquids came from, in order to collect at least a few drops and use in their life when needed. But it is not for nothing that the people say “The tale is a lie, but there is a hint in it,” because “living” and “dead” water actually exist.

From school we know the formula of water - H2O. but modern research showed that water has a much more complex structure, which, if desired, can be changed using electrolysis.

Why is “living” water so important to our body?

What is the difference between ionized water and plain water?

Two parameters: pH and redox potential (redox potential).

What does the pH parameter show?

Almost 80% of the foods we eat are acid-forming. And it's not how they taste. It's just that when they are broken down in the body, more acids are formed than alkalis (bases).

Whether a particular product is an acid or an alkali is determined by the pH value.

1. Alkalis have a pH above 7.
2. The acids have a pH below 7.
3. Neutral foods have a pH of 7.

Acid-forming products: beef, pork, lamb and chicken meat, sausage, white flour products, sugar, coffee, black tea, all alcoholic drinks, pasteurized juices, fish and seafood, cottage cheese, cheese, nuts and seeds, cereals, bread, buns and cakes, ice cream, eggs, lemonade, coca-cola, etc.

But what about alkaline-forming foods?

There are not so many of them: fruits (with the exception of canned ones), vegetables, herbs, natural yogurt, milk, soy, potatoes.

What about the drinks we drink? Which drinks are predominant in our diet: acidic or alkaline?

the pH of some drinks. Comparative data.

Please note that most juices mineral water, coffee, that is, all drinks we consume every day have an acidic pH.

Since our blood has a pH in the range of 7, 35 -7, 45, it is very important for a person to drink water with an alkaline pH every day.

Such water has a healing effect and resists oxidation of the body and diseases that are accompanied by oxidation. After all, almost all diseases have one cause - an overly oxidized body.

For example: When acid waste accumulates near the pancreas, and alkaline calcium ions are not enough to neutralize them, a person develops diabetes.

What does the redox potential parameter (redox potential) indicate?

Oxidation-reduction potential (ORP) indicates whether a product is an oxidant or an antioxidant.

If any product, for example, water, is saturated with electrons and is ready to give them away, then it is an antioxidant. ORP is measured in millivolts using special devices: redox testers. The water that a person drinks has long ceased to be drinking. We drink, as a rule, tap water, bottled water with a positive ORP (+200) - (+ 400MV). Large positive values ​​of hundreds of MV mean that such water not only "does not want" to donate electrons, but it itself takes them when it enters the body. This process promotes the formation of free radicals and is the cause of many serious diseases - cancer, diabetes, hypertension, heart attack, etc.

On the contrary, negative ORP values ​​mean that, getting into our body, such water itself gives up electrons.

Water with negative ORP and alkaline pH has pronounced healing properties and is recommended for daily use. Activated water is actively used in Japan, Austria, USA, Germany, India, Israel.

It is not surprising that such water is actively promoted in Japan. the state system health care, because "living" water can easily relieve a person from many diseases. Regular intake normalizes digestion, improves the functioning of internal organs. Moreover, such water does not "load" the body with additional chemicals than pills and synthetic medications... Drinking water, the acid-base balance of which is in harmony with the fluids inside the body, is an excellent prevention for most modern diseases. The ancient Slavs knew very well that natural sources help to increase life expectancy, so they were actively looking for "living" water. Today it can be obtained at home.

You can cook "live" and "dead" not only in specialized laboratories, but also in your kitchen. The water activator "Iva-1" is already known to many who are engaged in treatment with the help of "fabulous" water. Its manufacturers INCOMK LLC were awarded the Silver Medal in 2004 and the Bronze Medal in 2005 by the International Salon of Innovations and Investments.

It is quite simple to use a water activator, the developers made sure that the process of electrolysis of the liquid became as accessible as possible for the wide masses. "Iva-1" has a built-in timer that allows you to turn off the power to the device after the activation process is completed, and the owners will be notified of the readiness of the water for use by means of a sound signal. The use of unique water-insoluble electrodes makes it possible to obtain a liquid without impurities. Iva-1 is a multifunctional device that allows you to both improve the body's health and purify water from heavy metals at home.

The electroactivator of water changes its structure to molecular level and saturates with monomolecules by simple electrolysis... As a result, the user receives "living" and "dead" water, which is increasingly used in medicinal purposes... According to biophysical and biological indicators, such water is considered more active, its natural properties... Let us consider in more detail the work of such an activator and the benefits of the resulting water.

An electric activator is a simple electrical device for restructuring or activating ordinary water. In one cycle, the device simultaneously activates water or an aqueous solution of two types: catholyte (living, alkaline) and anolyte (acidic, dead). Each device consists of several elements:

• main bowl for converting alkaline water;
• removable container or glass made of fabric, ceramics;
• power supply unit from the network;
• top cover of the device.

The large bowl of the electric activator is made from safe food grade plastic, it is in it, by means of electrolysis, that ordinary water is structured into "living" water. A removable container made of ceramics or fabric serves as a diaphragm (partition) between the catholyte and the anolyte, and acidic "dead" water is structured in it.

Below in the cover of the activator is located four electrodes: a pair of anodes, with a sheath with a chemically resistant coating and a pair of cathodes made of food grade or stainless steel.

The electrodes of the activator, developed and manufactured in an industrial environment, are not destroyed by electrochemical processes, which makes them different from home-made devices.

During each conversion cycle, an electric current enters the water through the electrodes, changing its catalytic and reactive activity. Also, electrolysis changes the entire chain of intermolecular interactions, and, as a result, affects the structure of water or an aqueous solution at the physical level. In other words, under the influence electric current in tap, distilled or filtered water molecular structure changes.

Cathodic electrochemical action on a liquid converts some of the salts into hydroxides, imparting alkaline properties to water. The concentration of hydrogen increases, and nitrogen and oxygen, on the contrary, decreases. Due to the manifestation of stable and unstable acids (sulfuric, narsulfuric, hydrochloric), anodic treatment intensively increases the acidity in aqueous solution, significantly increasing the redox potential.

Using the appliance

The use of a household electric activator for tap or distilled water does not cause any difficulties. The algorithm of action is simple:

• water is poured into a ceramic (or tarpaulin) flask to the upper level;
• water is poured into a plastic bowl 1.5 cm below the edge of the ceramic diaphragm;
• connect the activator to the mains.

The structuring process lasts from 10 to 40 minutes: the longer the device works, the higher the concentration of trace elements. After 40 minutes, the effect of electrolysis stops, and the device should be turned off. It is recommended to take short pauses between cycles of 5 to 20 minutes.

To avoid overheating during activation it is important to control the temperature of the plastic bowl and the power supply. The current flow is increased when the water salinity is too high. For the same reason, it is impossible to fill in the saline solution for the formation of catholyte and anolyte in one cycle.

Upon completion of activation, the water is defended for about an hour; the appearance of white bloom or sediment throughout the inner area. Its use is prohibited, later the sediment must be drained into the sewer. On the walls of the ceramic glass is collected white bloom, the user manual indicates the frequency of cleaning the anolyte container. Usually, before every tenth cycle, the glass is placed in vinegar. The electrodes made of stainless or food steel are wiped with any household rag, and the black ones are cleaned on their own; it is unacceptable to clean them mechanically or with special means.

Catholyte and anolyte, belonging to the class of metastable elements, over time they lose their unique properties. The effect of activated water is maintained for 7 hours after treatment. Storing water or saline solution in the refrigerator does not make sense; the liquid must be consumed immediately.

"Living" and "dead" water

The purpose of operating each activator is water restructuring, and any electrical device contains two containers, in one process the device makes both "dead" and "living" water. For example, the increasingly popular AP-1 looks like an ordinary filter jug, inside of which there is a small additional container.

The definitions "living" and "dead" water are arbitrary, in both cases it is ordinary water with a changed molecular structure. The term "living water" means catholyte, which stimulates all biological processes, and "dead" - anolyte, means slowing down.

There are many different opinions about the miraculous properties of the healing water. One can argue for a long time whether this is a myth or reality, but one cannot deny the physical processes that occur at the molecular level.

Benefits of "living" water

Living water or catholyte has alkaline properties, has a high ph - about 10 units. Under the influence of an electric current, some of the molecules decompose into hydrogen ions. Alkaline water promotes vital functions and has a strong biostimulating effect. Therefore, it is used to cleanse the body, heal wounds, and the seeds treated with "living" water bloom and germinate faster.

Naturally, such water cannot be called a panacea for all diseases and is hardly allowed to be taken as an independent medicine. At the same time, its benefits for the body are difficult to underestimate:

• water enriched with alkali promotes the healing of all wounds and burns;
• helps to cure peptic ulcers;
• cleanses the body, removes toxins and toxins faster;
• enhances arterial pressure and strengthens the immune system;
• has a beneficial, healing effect on the kidneys, liver, as well as the entire digestive system;
• enhances the effect of medications taken.

Features of dead water

Dead water or anolyte is endowed with retarding properties and stops any biological processes. It is used for disinfection:

• peeling vegetables or fruits, which increases their shelf life;
• disinfection of any items;
• in alternative medicine to kill allergens, fungi and other bacteria.

Anolyte is acidic water with a low ph level (3-4 units), when interacting with bacteria, it destroys cell walls, blocks protein synthesis. Expressed simple language- "dead" water freezes the vital activity of microorganisms, which is useful for humans in the fight against various diseases.

Review of modern electroactivators of water

Below we present the most popular examples of industrial activators. Despite the widespread prevalence, not all of the presented models do their job well.

AP-1 apparatus

Electric activator for water AP-1 is one of the most popular . The device differs good quality of production:

• the main container is made of high quality plastic;
• heavy-duty electrodes made of titanium, platinum and stainless steel;
• the ceramic diaphragm is made from a special type of clay.

The 70 W activator consumes no more than 40 W during operation, which makes it quite economical. In one cycle of 20-30 minutes AP-1 is able to activate almost one and a half liters of structured water. The AP-1 device does not differ in its stylish and modern design, but will easily and discreetly fit into any kitchen.

The cost of AP-1 is slightly higher than similar devices, thanks to the built-in water quality indicator.

"Zdravnik"

The simple apparatus is available in two versions: with a ceramic or tarpaulin glass. The second one will cost a little less. "Zdravnik", equipped with ceramic glass, at a price close to the AP-1, but significantly inferior to it in quality and functionality.

The design is very similar to the AP-1:

• plastic container;
• a glass of ceramics or tarpaulin;
• stainless steel electrodes.

Its advantage is its price, otherwise the device attracts little attention. Naturally, Melesta will cope with its main task, but it has some drawbacks. For example, the construction implies only cloth glass which is inferior to ceramics. Instead of four electrodes, only two made of food-grade steel are installed here. The external data of the device will not earn more than three points: rough execution and mediocre design.

Naturally, the disadvantages do not affect the water quality, the activation result will be similar to the AP-1 or professional PTV. But the term of work, ergonomics and aesthetics are still incomplete.

PTV

The PTV is designed for professional use in sanatoriums or dispensaries, but it is often purchased for the home. The advantage of the activator for water is in its resource, here the manufacturer installed thick electrodes, which significantly increases its service life. The power of the device is only 75 watts.

PTV is also distinguished by its design: instead of a ceramic glass for anolyte, the device has one container, separated by a wood membrane. The only drawback of the activator is its cost, but the best quality it requires.

For a long time there have been legends about "living" and "dead" water. This is no coincidence - life on Earth is impossible without water in general, man is 80% water. From what kind of water our body consumes, its condition, health of a person as a whole depends. There are more paradoxes associated with water than they are reliable physical interpretations... Take for example Epiphany water... It does not deteriorate for many months, even if taken from a tap or a "dirty" source. Some scientists associate this fact with a decrease in the electrical conductivity of water during the period of the lowest solar activity and, as a result, a decrease in the growth of microorganisms. This is the so-called "dead" water effect.

On the contrary, "live" or activated water helps to strengthen the body's immunity, there is confirmed evidence of the positive effect of its use in the treatment of certain diseases ( infectious diseases, diseases of the digestive system, arthrosis and many others). Of course, unable to give a truly scientific explanation of the physical and biological processes occurring in water, many scientists completely reject both the beneficial and negative effects of living and dead water. This fact, however, does not in any way affect the amazing properties of water.

Schematic diagram of the device for obtaining living water

In order to obtain dead and living water by the most in a simple way, you can assemble an elementary electrochemical device according to scheme 1:

The device is supplied with an alternating voltage of 220 volts of household electrical wiring, therefore, precautions must be taken: carefully insulate current-carrying wires, do not come into contact with water and circuit elements during operation of the device, provide a safety system. It is better to turn on the device through an extension cord with a built-in switch and fuse industrial production... The anode (positive electrode) and cathode (negative) can be made from chemically neutral stainless steel or food grade aluminum (the material from which cans for drinks and beer). The electrodes are carefully secured to the plastic cover with a fiberglass or other resilient non-conductive spacer and screw connection. The circuit includes a semiconductor diode for rectifying the alternating voltage. It must be rated for forward currents of 5 Amps and reverse voltages over 300 Volts. Among the domestic elements, diodes D231, D232 are suitable.

Components of the device

The cover is put on glass jar the appropriate volume into which the water is filled. A tarpaulin hose or other dense fabric bag surrounding the positive anode is used to separate living and dead water, as shown in Figure 2:

According to the electrochemical theory, during the electrolysis process, the composition is formed around the positive electrode high acidity(anolyte), called "dead" water. It has antiseptic, antibacterial, anti-allergic and many other properties that are not always useful. All the remaining liquid inside the vessel is an alkaline solution (catholyte) of various pH levels (from 2.0 to 10.0), depending on the initial amount of salt impurities in the water and the production technology. It is she who is called "living water". The optimal time required for the preparation of dead and living water is approximately ten minutes, the storage time is no more than three days.

Appearance homemade devices shown in photos 3:

In the second device, instead of a half-wave rectifier on one diode, a full-wave rectifier bridge on four diodes is used. This circuit design allows you to increase the performance of the device. For a more convenient separation of dead and living water, you can make a device consisting of two separate containers, as shown in diagram 4:

According to this scheme, the electrochemical process is supported by the current passing through the wetted linen or cotton tow. In this case, living and dead water will accumulate in separate vessels, which is very technologically advanced. The features of the proposed circuit should include a series-connected lamp, designed at the same time to limit the maximum current and indication. At the beginning of the process, the lamp burns with the highest intensity, as it proceeds, the brightness decreases.

Industrial design of the device

Currently, electric water activators are on sale industrial production... Photo 5 shows appearance and the composition of the device "Espero-1":

Its principle of operation is similar to the devices described above, the properties of the water produced by this device, in principle, should coincide with homemade living and dead water.

The paradox is that in addition to purely physical and chemical properties, water has such incredible properties as energy and information. It is known and proven that water can be charged with human thought, while the same water can provide both positive and negative impact on the human body. Water, at the same time being an indispensable condition for human life, is the main cause of his diseases. As for the variety of states of water, liquid water has five states, frozen - fourteen. It has the highest heat capacity among all liquids and transfers heat from southern latitudes to northern latitudes, determining the climate on our planet. Having made homemade device, you can independently continue the study of the incomprehensible properties of the basis of life on Earth, water.

Dear readers, comment on the article, ask questions, subscribe to new publications - we are interested in your opinion :)

The alternative treatment with living and dead water is becoming more and more popular. This method seems to have come to us from Russian fairy tales. In fact, a liquid that has medicinal properties is formed as a result of electrolysis. In this article, we will look at how the treatment takes place, and also cover the topic of "living water - cooking".

What does alive and dead mean?

Dead water is acidic, its electrical potential is positive. Living water is a negatively charged liquid and has a pH of more than 9, that is, it is alkaline. Both types of water are used in alternative medicine. There is a treatment with living and dead water.

Influence on the body

What is the benefit of living water?

Living water stimulates life processes in the body:

1. Rejuvenates the body
2. Boosts immunity
3. Accelerates metabolic processes
4. Heals wounds

Dead water properties

The properties of dead water are also very valuable:

1. Good disinfectant
2. Has a bactericidal effect
3. Relieves colds
4. Eliminates fungus

Treatment with living and dead water has become popular because the scope of its application is wide enough. Next, we will consider such a question as living water - preparation and the necessary devices for this.

What do you need to have?

For cooking the right water special devices are sold activators. You can make them yourself at home. What you need for this:

1. Water. Ideal option there will be spring water, but not everyone can find it, so ordinary tap water is fine. It needs to be defended throughout the day.
2. Two glass mugs
3. Two stainless forks
4. Bandage and cotton wool
5. 20 W lamp.
6. Wire with plug

Most homes have these items. If something is missing, you can buy it.

Living and dead water - preparation

To prepare living water, you need to perform quite simple manipulations:

1. Place the forks in the cups with the tines facing up;
2. Connect a diode to one of the plugs, the end of which you connect to the wire;
3. You can make the system stronger using electrical tape;
4. Attach the free end of the wire to the 2 plug.

Ready. Now all that remains is to plug the plug into the outlet. Lean the diode against the lamp. If the lamp is on, then everything has been done correctly. Disconnect from the network. Now prepare a "bridge" for ions - wrap cotton wool with a gauze bandage.

Fill the cups equally with water, place the cotton wool bridge so that it connects both cups. That's all. You can now connect the system to the network. After 10 minutes, you will have ready-made living water.

Outcomes

After disconnecting the system from the network, remove the bridge. In the cup to which the diode was connected, the water will be dead, since there is a positive charge. In the other, living, negatively charged, water.

We remind you that the plugs should be pulled out of the water ONLY after disconnecting the device from the mains. Otherwise, you will be electrocuted.

It is so very simple that you can build the system yourself at home and carry out treatment with living and dead water.

Preparing melt water

Freezing water also produces a very useful liquid. It is not living water, as some say. Read more in the article: But she also has a number useful properties and from it you can make living and dead water.

For preparation, the water must be defended for a day, or cleaned with a filter. What's next:

• Heat the water to a boil. This will eliminate some of the harmful compounds.
• Cool the liquid at indoor conditions temperature.
• Deuterium removal from water. Throw away the first ice that forms during freezing, it will contain this dangerous isotope, since it freezes first at higher temperatures.
• The liquid is sent back to the freezer. It freezes and looks like this: transparent at the edges, white at the center. Pour boiling water over the white part and remove. It will contain harmful substances... The clear ice melts and you can drink it.
• Melting should take place at room temperature. The resulting water can be drunk and can also be washed. When boiled, such water can lose its medicinal properties so don't do it.

Recipes for treatment with living and dead water.

Here are some recipes for how to treat living and dead water:

1. Allergy. Gargle with dead water after each meal for three days. Drink about half a glass of live water 10 minutes after rinsing.
2. Constipation. Drink half a glass of live water.
3. Skin rashes. Wipe your face with dead water for about a week.
4. Angina. Gargle with dead water ten minutes before meals. Then drink a quarter glass of live water.
5. Diarrhea is treated with half a glass of dead water. If it does not help, then you can drink the same amount in an hour.
6. Liver diseases and their treatment with living and dead water. The first day, drink half a glass of dead water 4 times. Then for the rest of the week, half a glass of living water, the same number of doses.
7. A migraine goes away after drinking half a glass of dead water.
8. Gastritis. Half an hour before meals, drink living water as follows: a quarter of a glass on the first day, half a glass on the following days. The course is 3-7 days.
9. Pressure. If the pressure is low, then drink half a glass of live water 2 times a day. If the pressure is high, then use dead water. Don't drink for more than a week.