Technoelast epp consumption. Technoelast: characteristics and application features

Technology development does not stand still. This also affected construction market. More and more advanced materials are being created that have high rates of strength, durability and reliability. One of these materials is EPP technoelast, specifications which make it the most popular. This article describes what technoelast is, where it is used. Its modifications and composition will be considered, as well as what the letters E and P mean for the technical characteristics of EPP technoelast.

What is technoelast?

Technoelast is a rolled roofing material that is characterized by high reliability, waterproofing capabilities and high strength. Thanks to its properties, technoelast can be used in any climatic conditions. Technoelast is used to cover roofs, waterproofing foundations, swimming pools, garages and other structures.

The production technology consists in the fact that a layer of a mixture of bitumen, SBS thermoplastic (and its modifications) and filler is applied on both sides to a strong and sufficiently flexible base. SBS is an artificial rubber, and talc, dolomite and other substances can serve as fillers. The top and bottom layers are a film or a crumb. It is the film that protects the material from sticking during storage in a roll, and it is also melted during the installation of technoelast. The crumb can be both coarse-grained and fine fraction. Shale, sand, etc. are used in its quality.

Deciphering the abbreviation and the main modifications of technoelast

Technoelast is produced in several modifications, each of which has its own conditions and area of ​​use. And the letters that are indicated in the modification are deciphered as follows:

• the first letter of the abbreviation is the material from which the base is made. It can be: polyester (ether) - E, canvas - X or fabric - T;
• the second letter of the abbreviation is the type of top cover. It can be: crumb - K, film (or fine-grained dressing) - P;
• the third letter of the abbreviation is the type of bottom cover. It also comes in two types - crumb (K) and film (P).

Depending on the combination of these layers, TechnoNIKOL offers several types of technoelast:

• Technoelast EPP is a waterproofing agent for various construction projects. Apply it as various types, and for waterproofing floors, buildings, foundations, boiler houses, swimming pools and other buildings. In addition to absolute water resistance, it also has high extensibility and has high heat resistance. EPP is made from which SBS thermoplastic and filler are applied. The bottom layer is a film, and the top one is a fine-grained dressing. If it is used as a waterproofing for building structures, then welded in two layers using a burner.
• Technoelast EKP is a roofing waterproofing agent used as a top layer. It is often used with EPP technoelast, thus increasing reliability. roofing works. EKP is distinguished by high heat resistance and perfectly tolerates low temperatures (up to -30 ° C). As the main layer for the production of ECP is polyester (which is not subject to decay) with a layer of bitumen, thermoplastic and filler. The top is covered with a large mineral film, and the bottom layer is a protective film.
• Technoelast TKP is used as a roofing material for the top layer of the roofing sheet. Can also withstand high loads, so it is often used as a waterproofing agent for underground facilities. The roll material has high strength, increased reliability, resistant to steam and temperature surges. TKP technoelast is based on fiberglass, which is covered with SBS-bitumen with thermoelast on top. The top layer is a crumb, and the bottom layer is a film.
• Technoelast HPP is a waterproofing agent that is mainly used as a bottom layer for roofing, foundations, swimming pools, etc. Differs in resistance to frosts and heat resistance.
• TKP roll material consists of fiberglass coated with SBS-modified bitumen and filler, and a film. Due to the absence of polyester and chips, it has the smallest thickness - 3 mm.

Technical characteristics of EPP technoelast

Technical characteristics of waterproofing technoelast EPP:

• top covering - a film without indication of a logo; bottom covering - a film with a logo;
• weight not less than 4.95 kg/m 2 ;
• breaking strength of polyester in longitudinal stretching - not less than 600 N, and in transverse stretching - not less than 400 N;
• thickness - 0.004 m;
• heat resistance - not less than 100 ° C;
• length - 10 m, width - 1 m;
• full water resistance throughout the day at a pressure of not less than 0.2 MPa;
• moisture absorption during the day is not more than 1% of the mass;
• the temperature of flexibility on the beam at radii of 0.025 m and 0.01 m is not more than -25 ° C;
• the weight of the binder on the welding side is not less than 2 kg/m 2 .

The characteristics of the manufactured technoelast correspond to the technical characteristics of EPP technoelast according to GOST 30547-97.

Advantages and disadvantages

Like any material, EPP technoelast has its advantages and disadvantages.

Technoelast advantages:

1. Long service life. Waterproofing can last up to 30 years.
2. High quality raw materials for the manufacture of technoelast.
3. Resistant to various types impact - mechanical, biological, air.
4. It can be applied on any surface.
5. Environmentally friendly. That is, it does not harm either humans or the environment.
6. High elasticity with large temperature fluctuations.
7. It has high thermo technical characteristics. Technoelast EPP also has high waterproofing and excellent sound absorption.
8. Ease of fitting and fitting.
9. Strong bonding to a variety of surfaces.

Disadvantages of technoelast:

1. During installation, it is important that the surface is even.
2. Small selection of colors.
3. Burner heating is longer.
4. The cost is above average.

Application area

Technoelast waterproofing has become very popular with various construction work. Due to its technical characteristics, technoelast EPP is primarily used where protection against moisture penetration is needed. It is also used as a material for roofing carpet.

In case of need for repair, technoelast is applied in one layer. If you need a new coating, then you need to apply two layers. At the same time, the top layer looks quite attractive, which allows you to avoid unnecessary spending on a decorated coating.

Installation and storage

For a long service life of waterproofing, it must not only be chosen correctly, but also properly laid and fixed.

The sequence of work is as follows:

1. The surface to which technoelast will be attached must be thoroughly cleaned of dust. If there are potholes and pits, then they should be cemented. Then degrease the surface of the structure.
2. To ensure the adhesion of technoelast, the base must be covered or diluted with bituminous mastic with gasoline (proportions 1:3).
3. At this step, you need to roll out and cut the panel.
4. Warm up the bottom layer gas burner and press to the base. All subsequent sheets are welded with an overlap of 9-10 cm.

Technoelast is quite easy to store. First of all, it should be placed in a room with dry air, which is well ventilated. It is necessary to fold the rolls on the shelves in a vertical position and in such a way that they are not closer than a meter from the heaters.

If you need to provide maximum waterproofing, then EPP technoelast is the ideal solution. The technical characteristics of the rolled material allow it to serve reliably and for a long time.

Technoelast, like most welded roofing materials, consists of:

• bases (fiberglass, fiberglass or polyester) - ensures the durability of the roofing;
• sbs-modified bituminous binder, which increases performance characteristics material;
• a polymer film with the logo of the manufacturer on the underside, which protects the web from mechanical damage, gluing the coils together, and also serves as an indicator of sufficient heating during the deposition of the material;
• polymer film on the upper side (in the case of the lower layers of the material) or slate dressing gray color designed to protect the bituminous binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs more complex production technology and the quality of the materials used. Artificial rubber added to bitumen provides flexibility at low temperatures and heat resistance at elevated temperatures. The reinforced base is not subject to decay and retains strength characteristics throughout the period of operation.

The relatively high price of Technoelast waterproofing is compensated by improved technical parameters:

Technoelast is marked with three letters, which mean:

• the first is the type of base: E - polyester, X - fiberglass, T - fiberglass;
• the second - the type of coating of the upper surface: P - polymer film, K - coarse-grained shale dressing;
• third - coating material with inside: P - polyethylene film.

Application

Technoelast is designed for waterproofing:

• roofing;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• pools;
• main pipelines;
• other building structures and structures.

For the device of the lower layers roofing cake Technoelast is used, both sides of which are pasted over with a film, for upper layers- material with a film on the bottom and with slate chips on top.

Technoelast has the following advantages:

• absolute water tightness;
• high tensile strength - Technoelast based on polyester and fiberglass is stronger than similar budget materials by 15%;
• durability - the synthetic base is not subject to decay, bitumen is not afraid of exposure to chemically active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• possibility of operation in any climatic zones- Technoelast withstands temperatures up to +100 o C;
• simple laying technology, the ability to perform work in the winter;
• affordable price — Technoelast is cheaper than most roofing materials.

It is profitable to use Technoelast. Budget roll materials serve up to five times less than Technoelast, the price per m 2 is only 2 times less.

Technoelast from Ant-Snab

If you decide to buy Technoelast in Moscow from Ant-Snab, the price will pleasantly surprise you. We work without intermediaries, we get Technoelast directly from TechnoNIKOL factories. Discounts are available for bulk purchases. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose the brand of roofing that meets the conditions of use;
• calculate the need for materials on the online calculator available on the site;
• fill in the order form;
• agree on the terms of payment and delivery;
• if you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and rise to the floor. To take out roofing materials independently, you should agree on the date of shipment and the method of payment. Come. Call. We are waiting for your orders.

Technoelast is a highly reliable roofing and waterproofing polymer-bitumen material. It is in demand among builders of residential and industrial buildings, objects of different scale and complexity.

Compound

Pasting waterproofing technoelast EPP consists of several layers:

1. At the heart - polyester fiber (polyester). It has elasticity and elasticity, which provides good adaptive properties of the waterproofing layer.
2. Polymer-bitumen binder is an impregnation of polyester on both sides. Additives are added to hydrocarbons (bitumen) that increase the resistance of the web to temperature fluctuations, weather and mechanical influences.
3. fusible protective film salient feature lining waterproofing technoelast. During installation, the bottom layer is heated and the canvas is glued to the base with it, then the finishing roof or structures (depending on the place of application) are laid on the top coating. In addition, the film prevents the roll from sticking together during storage and transportation.

The total thickness of the EPP technoelast is 4 mm (standard, may differ from manufacturer to manufacturer).

Specifications

Today there are many varieties waterproofing materials bituminous families, to which the considered one belongs. All of them differ in individual components: the base, the composition of the polymer binder, the type protective coating. When choosing a material for construction, craftsmen and engineers rely primarily on the performance of the material. The most popular is EPP technoelast from TechnoNIKOL, so we will consider the technical characteristics of this product as the main one:

The technical characteristics of EPP technoelast from other factories may differ slightly; separate documentation must be drawn up for each roll, on the basis of which specialists make the choice of materials. Usually the packaging acts as an information sheet.

Application

The direct purpose of the material is waterproofing and the organization of lining layers that prevent the penetration of water under the structure.

Application of EPP type technoelast:

• Construction of roofs on concrete and stone buildings, including those operated by roofs;
• Insulation of swimming pool bowls and technical pits;
• Construction of dams, dams, hydraulic structures;
• External and internal waterproofing of foundations;
• Arrangement of underground garages and parking lots.

Widespread use is due, among other things, to affordable cost - the price per m² of EPP technoelast produced by TechnoNIKOL from different sellers is 170-200 rubles (on average).

Storage

Polymer-bitumen Technoetast requires special conditions storage:

• Distance to heating devices - at least 1 meter;
• Vertical position of rolls on shelves;
• Rolls should be stored in a dry, ventilated area.

Material Quantity Calculation

The consumption of EPP technoelast per 1 m² of surface is easy to calculate - the values ​​correspond to each other. It is necessary to take into account only the margin for overlap.

Calculation example for a roof 10 meters long and 6 meters wide:

1. Let's calculate the total number of meters - 6 × 10 = 60 meters.
2. We take into account the overlay of strips of 8-10 cm. For a roof length of 10 meters, you will need 10 strips of technoelast, between them you will get 9 overlays (1 from each canvas): 9 × 10 = 90 cm or 9 × 8 = 72 cm. It turns out that you need to add more one strip, total - 11 sheets of technoelast.
3. For allowances on the walls and the parapet, we leave 20 cm on one side. In total, one lane is 6.4 meters. Here we add allowances for connecting strips of different lengths in width, because it turns out that every second strip consists of two segments, and this is 20 cm × 5.
4. Result: 6.4 (meters, total length strips) ∙ 11 (strips in width) + joint allowances (20 × 5) = 74.1 m². Accordingly, it is necessary to buy 8 rolls of EPP technoetas.

If the calculated value is obtained with a small "tail", you can try to cut some joints, make them smaller. But in this case, you need to be completely confident in the quality of the work performed. We still recommend not to save and do everything according to the standards. The remaining piece of canvas is sure to come in handy in the household and in the construction of other objects.

Mounting

In order for the waterproofing to serve for a long time, it must be properly laid on the base and fixed.

The technology of laying technoelast of the EPP type involves the fusing of a polymer protective film, which means that a gas burner is needed to carry out the work.

Work algorithm:

1. The surface of the structure is thoroughly cleaned of dust, which prevents the canvas from sticking to the base. The base should be thoroughly degreased, potholes and pits should be repaired with cement mortar.
2. To ensure the adhesion of technoelast, the base must be primed. To do this, you can use a bituminous primer, which is sold in ready-made or dilute bituminous mastic with gasoline in a ratio of 1: 3 and cover with this compound concrete structure. Easy to apply with a wide brush.
3. This is followed by raising and cutting the canvas.
4. When everything is ready, laying the waterproofing begins. The lower film is melted with a burner, pressed to the base. Adjacent sheets are mounted with an overlap of 8-10 cm.
5. On top of the waterproofing, they are also laid by fusing roofing with protective chip.

Technoelast EPP is a new generation waterproofing that outperforms its predecessors such as roofing felts. The service life of the coating will exceed 10 years if the choice of material and its installation are carried out correctly.

If you need reliable waterproofing roofs or structures in contact with the ground (foundations, walls of basements, cellars, overpasses), Technoelast EPP TechnoNikol is suitable for you.

A durable film with a bitumen-polymer base technoelast has several modifications. Insulation will protect the roof from heavy rainfall, it is used during installation reinforced concrete structures, foundations, flyovers, pools, used for underground laying. Roll waterproofing EPP is resistant to tearing, mechanical damage. Thanks to the special structure of the insulating material, maximum durability is ensured.

Specifications

Benefits of waterproofing

Waterproofing technoelast EPP is resistant to microorganisms. Structure and functional purpose remain unchanged at high temperatures. To perform construction, repair and roofing work, it is advantageous to buy EPP technoelast (bitumen-polymer film) from Teplosnab in Moscow. Consider the main advantages:

• absolute security;
• service life up to 30 years;
• excellent flexibility;
• good sound insulation;
• does not interact with the components of wildlife (fungi, bacteria);
• tolerates high temperatures environment;
• moisture resistance.

Retail price: on request

Technoelast EPP - lining roofing and waterproofing material.

Purpose Technoelast EPP

The device of a roofing carpet of constructions (lining layer); waterproofing of building structures. Particularly recommended for use in structures subject to movement. Application: industrial roofs, loadable roofs, foundations, underground garages, boiler houses, subway vaults, swimming pools. Combined with EKP Technoelast. It is used at temperatures up to -35 0C.

Structure of Technoelast EPP

Manufactured Technoelast EPP applying a bitumen-polymer binder to the polyester base (SBS modified bitumen, fillers). On both sides there is a protective polyethylene film (to protect the material from sticking during storage and transportation). Durable, strong and elastic material, reliably protecting from moisture, biostable. Installation is carried out by welding with a propane torch.

Technoelast EKP can be used as a lower quality analogue

Specifications

Weight of material, kg/sq.m. 4.6

Thickness, mm four

Material length / width, m. 10x1

• - in the transverse direction 400
• - in the longitudinal direction 600

Moisture absorption within 24 hours, by weight,% 1

Weight of binder from the welded side, kg./m2 2