INSTRUCTIONS AND PROPHECIES OF THE Blessed MOTHER ALIPIA GOLOSEEVSKY, Kyiv...
![Instructions and prophecies of the blessed mother Alipia Goloseevskaya, the Kyiv old woman, the holy fool for Christ's sake](https://i1.wp.com/megapoisk.com/uploads/7013271468409176.jpg)
In our past articles, you learned how to create mail on your iPhone, and if not yet, then you. This article will be useful to those who have already set up their mail, and then suddenly remembered that they have two, or eight, as you like. And so let's get started...
Since you are already experienced gurus in setting up mail, we will not dwell on the little things and immediately go to the menu item "Settings" -> "Mail, addresses, calendars", there we see the account we have already created, do not touch it, but click "Add ".
Next, follow the usual instructions for setting up mail, who forgot how, and repeat. After we have added a second account, we need to go into each and check that they are both active, as shown in the figure.
Then we exit the settings and go to our mail.
There we already see several mailboxes, each has a separate Inbox folder. According to the same scheme, you can configure as many mailboxes as you like. The number above the "Mail" button will notify you about the arrival of new letters, so regularly checking your mail will be as easy for you as receiving SMS. Any questions you are interested in setting up mail can ask us, we will solve your problem together.
Before proceeding to the direct setup and subsequent use of Rambler Mail on iPhone, you must provide third-party programs that this case are mail clients, access to work with the service. This is done as follows:
enter the code from the image in the pop-up window and click "Send".
Done, preliminary setup of Rambler Mail is done. At this stage, do not rush to close the mail service page (directly the section "Settings" — "Programs") or just remember, or rather write down the data presented in the following blocks:
Now let's go directly to setting up Rambler Mail on iPhone
First of all, let's look at how to ensure the correct operation of Rambler Mail in a standard mail client available on every iPhone, regardless of iOS version.
After providing the required information, proceed "Further".
If you do not want to play with the settings of your iPhone in order to use Rambler mail on it normally, you can install a proprietary client application created by the developers of the service in question. This is done as follows:
Note: Preliminary configuration of the mail service, described in the first part of this article, is still necessary. The application will not work without the appropriate permissions.
As you can see, using the Rambler Mail client application is a much simpler and more convenient option in its implementation, requiring much less time and effort, at least when compared with the first method we proposed above.
From this short article, you learned how to set up Rambler / mail on the iPhone, using the standard features of a mobile device or a proprietary client application developed directly by the mail service. Which option to choose is up to you, we hope that given material was helpful to you.
For owners of iOS mobile devices, it is possible to synchronize their device with their Yandex mail account. About,
how to do it, and will be discussed in this article.
Yandex.Mail, like most mail services, requires certain permissions to be used in third-party client applications (both desktop and mobile). To submit them, do the following:
There are several options for connecting this mail service, after which it will be possible to work with letters on a mobile device.
For this procedure, you will only need the device itself and account information:
After completing the steps described above, Yandex.Mail on iPhone will be synchronized, configured, and ready to go. But sometimes these manipulations are not enough - the mail does not work or gives an error. In this case, you must do the following:
In the same cases when there are no mailboxes yet, select the item "Not configured". In field "Node name" write down the address smtp.yandex.com.
Note: The Username field is marked as optional. This is partly true, but sometimes it is the lack of information specified in it that causes problems with sending / receiving letters. In such cases, you must enter the name of the box there, but without part"@yandex.ru", that is, if, for example, our email [email protected], you only need to enter lumpics.
But it happens that mail does not work with this port number. If you are experiencing a similar problem, try the following value - 587 , everything works well on it.
Now Yandex.Mail will definitely work fine. We will consider another option for setting it up on the iPhone.
Postal service provides special program for iPhone users. You can find it on the website. After downloading and installing, launch the program and follow the instructions of the installer. To add an existing mail, you only need to enter its address and password in the application.
This completes the Yandex mail setup. All emails will be displayed in the application itself.
Be sure to indicate the mailbox, which will subsequently be your login in the system. All services will be tied to it Apple- Find My iPhone, iCloud, iTunes, App Store, etc. True, at first this is not given much attention. After all, the main thing is to start using the device as quickly as possible. And on what e-mail box the account is registered... yes, it doesn't matter!
But then comes the realization that too much is connected with this particular Apple ID (purchases, downloads, backups), but no one remembers the mail to which the identifier was originally registered. Which means you need to change it to something else. How to do it? This is what we'll talk about today.
Ready? One, two, three, let's go!
To begin with, about what might motivate you to this procedure:
To change electronic postal address Apple ID is required:
That's it, time to get started!
From a computer, go to this page - manage Apple ID. Enter your Apple ID and password.
The main account management menu opens. In the right corner we see the button - change.
In the window that opens, select - change the email address.
In the pop-up form, indicate the mail that you would like to use as a new one for your Apple ID.
All! Your Apple ID is now linked to your new email. Please note that after this procedure, all devices will be automatically logged out of your account - you will have to log in again.
In some cases, when changing mail, problems may arise, here are the main reasons why this happens:
Finally, I would like to remind you that in order to avoid various problems, it is very important to always have access to the mail to which your Apple ID is linked.
Moreover, it is highly desirable that you and only you know it. Otherwise, an outsider can easily read the correspondence, see the photo, and indeed absolutely all your data. Well, or "simply" block the device.
Therefore, be careful and careful. As I have already advised, the most the best option will create a separate email account for Apple ID and never use it anywhere else. After all, safety is above all!
P.S. Write your questions in the comments - I will try to give an answer and suggest a solution. Powerful and decisive "like" to the author for motivation :)!
A mobile device should be comfortable and useful. And how can you do without fast and convenient mail? Get the iPhone to interact with the right one mailbox its proper setting will allow.
Don't know how to create and add a new one email? In this article, we will tell you how to set up mail on iPhone (5, 6, 7, 8, X): Yandex, Rambler, Outlook, Mail.ru, Gmail and any other mailbox.
Integration with Google is easier to do than with the rest. Those who limit themselves to this service will have the least hassle, because everything will happen almost instantly. Here's what you need to do to set up mail on iPhone for the owners of this box:
1. Select the "Mail" icon on the desktop of the smartphone (in case the mail is the first one).
2. Select "Google".
3. Enter the mailbox address and password.
That's the whole simple process. Additionally, you can specify your name and add a description, this can make using mail on iPhone more comfortable. It remains only to save the result. It couldn't be easier.
This inconvenience has already been fixed in the new iOS, but users with older devices remain at a disadvantage. In this case, everything will be a little more complicated, but you will not have to face anything really difficult. All that an iPhone user needs to do to integrate with the service:
1. Select "Settings".
2. Click "Accounts and passwords".
3. Select "Add account".
4. Click "Other".
5. Select "New Account".
6. Enter e-mail and password.
7. Change the IMAP protocol to POP.
In older versions of iOS, Russian mail services are not available by default. Therefore, as with Yandex, you will have to make more efforts to integrate in comparison with Google.
We will look at the three most popular Russian-language mails available for the iPhone. Other Russian services will integrate with the iPhone in the same way as Yandex, Mail.ru and Rambler. The only difference from popular foreign analogues is that you will have to enter the data yourself.
When adding an account for this service, you will have to do almost everything the same as with Yandex. The only difference is in the names of the hosts for outgoing and incoming mail.
Here's what the hostname of outgoing mail should look like: smtp.mail.ru. The host name of incoming messages should be made as follows: pop3.mail.ru. Now the service is ready to work, and the user just needs to save the result.
Ideally, when using this service, all data should be registered automatically, but there are times when this does not happen. They are easy to enter yourself. The algorithm of actions is the same.
You need to change the node names. In this case, for the incoming mail server, this name will look like this: pop.rambler.ru. The host name for the outgoing mail server will be: smtp.rambler.ru.
For the service from Rambler, you can also use the IMAP protocol. It is more difficult to set up than POP3, but it has a number of advantages. Help articles of the service will help to activate the protocol.
Very often, people start using not one, but several mails on iPhone to achieve greater convenience. For example, one mail can be used for Twitch and YouTube newsletters, for games and other entertainment industries. Another may be working and limited only business letters and invitations. I think you understand the essence of the message, so let's look at how to connect a second mail on an iPhone.
1. First, go to "Settings" and find the section "Accounts and passwords" (the name may be different, depending on the version of iOS).
2. Select the Add Account tab.
3. Now, just repeat all the steps described in the previous step.
Important: the second mail will be located under the first and in order to go to it, you will need to scroll down the page.
In order to find out what your mail settings are, you can simply use the Apple website. To do this, do the following (or just navigate to ):
1. Select "Support".
2. Click "iPhone".
3. Scroll down the page and select the Programs tab.
4. Click Mail.
5. Tap "Search for Mail settings".
6. Enter your mailbox address.
As a result, the user will receive the settings of the Mail program. It's comfortable and fast way, which allows you to easily find out which mailboxes have already been integrated with, how filters are configured, and so on.
With integration and basic settings, everything is clear. But it's important to know how to set up the rest as well. To achieve convenience and save time, it is worth paying attention to, among other things, the following aspects:
Message groups are conveniently organized by topic. This will save you a lot of time and will also add convenience. You can do this in several mailboxes at the expense of the Mail program. Here's what to do:
1. Click "Settings".
2. Select "Mail".
3. Click on "Processing themes".
You can choose to Collapse Read, Organize by Topic, End Topics, or Last letter above". Which of these is more convenient? Depends solely on the priorities of the user.
Replying to messages is convenient if they are all sorted into groups. Otherwise, the user risks getting confused and sending the message to the wrong place. This is especially important for business people.
It is important to set up notifications about replies to letters. To do this, through the "Settings" you need to go to "Notifications", and then to "Mail". There you can configure the "Notify me" function.