Proverbs and sayings about May HORIZONTALLY: 2. May will deceive - in ... will leave.4 ....
Roller skis are roller skis. By analogy with roller skates, they are designed for skating on asphalt, for summer training of skiers, for competitions. Among fans of rollerskis there are both novice amateurs and professional athletes.
markup
A pair of roller skis consists of two platforms with rollers attached to them. The rollers themselves are equipped with mudguards. Bindings on new rollerskis often come separately and are classic or skating. Self installation fasteners begins with markings. Attach the ski binding assembly to the platform so that the widest part of the sole of the binding is aligned with the middle of the roller platform. If you are attaching classic bindings for classic running, attach the bindings end-to-end to the rear mudguard. After that, mark the place where the front fixing screw will be screwed in.Some models of roller skis are sold already marked for mounting bindings. As a rule, they contain two sets of marks for screws. The first is for large shoes (greater than 40), the second is for small shoes (less than 40). Mounting of fasteners is best done using a special template to ensure maximum accuracy.
Fastening
Before screwing in screws, pre-drill holes for them. For drilling, use a variable-speed drill and drills that provide the desired diameter and depth of the hole. If you have access to specialized equipment, use a special drill with an extension. It ensures that the drill is centered in the drill and stops at the required depth. When using a standard drill, use drills with a diameter of 3.4-3.6 mm. If drilling occurs with the help of a brace, the use of a jig is mandatory: without it, the drill often leads to the side.For fastening, use the self-tapping screws that come with the fasteners. Although they twist with difficulty, they hold securely and firmly. Before screwing in, the screws can be moistened with machine oil to reduce the force applied to the screwdriver. Unlike skis, drilling holes in rollers must be done with the utmost care. If an erroneous hole in the skis can be closed with a plug, this cannot be done on roller skates. Screwdrivers with PH 3 or PZ 3 bits can be used for driving screws.
Many athletes use an alternative method of screwing on bindings using M4x25 countersunk screws. The screwing points are marked with a stencil, the lower part is drilled out for steel hollow T-shaped caps. The caps are inserted from below and countersunk screws are screwed into them. Unlike self-tapping screws, this method, although more laborious, is much more accurate and reliable with intensive use of rollers. Also, this option is ideal for those who have already unsuccessfully drilled holes for self-tapping screws.
Attention, only TODAY!
All interesting
Often it becomes necessary to screw a screw into concrete wall. In this case, you need to know that the screws are fixed in the dowels. The work is laborious, but doable, so do not be afraid of its complexity. Concrete and reinforced concrete is the most popular…
When performing various repairs and construction works often it becomes necessary to make a large diameter hole in metal or plastic. When drilling large holes, a number of difficulties arise. If you buy enough...
The slate is very firmly embedded in modern building. This easy-to-install, fairly durable and inexpensive material has taken its place on the market. roofing materials. But for all positive qualities and popularity, it is quite fragile and with ...
Self-installation of the sink does not require special knowledge and skills, and almost anyone who knows how to use a hammer drill and a screwdriver can do it. Even though the installation details depend on the washbasin model,…
Screws are quite often used in housework and construction. The popularity of this type of fastening is associated with the convenience of fastening parts to a wooden base. A special type of screw is a self-tapping screw or self-tapping screw, which differs from ...
screw is fastener which is used to connect various surfaces. Structurally, the screw consists of a head with a slot, a threaded rod and a threaded tip. Screws are made from low carbon steel...
As a rule, most sports stores provide a service professional installation fasteners. But if, for one reason or another, you do not want to resort to the help of specialists, you can try installing ski mounts ...
For young skiers, the most optimal is the installation of semi-rigid ski bindings. A child who has just started skiing moves slowly and unsteadily and, as a result, often freezes in the process. ski trips. Semi-rigid mounts…
When buying new skis, you have to deal with installing mounts on them. In stores, of course, they offer to install bindings on purchased skis, but this is associated with additional costs. Installing the mounts yourself is not so difficult ...
Ski bindings can be divided into two categories: rigid and semi-rigid. Hard shoes require special boots. By installing semi-rigid shoes, you can ski in regular shoes. You will need - skis; - a set of semi-rigid ...
), it remains only to put the mounts and train. The installation process is simple, but requires some skill. Therefore, we recommend contacting service center where professionals will install fasteners quickly and efficiently. If you still want to do it yourself, then let's start.
Installing bindings on roller skis is practically no different from installing bindings on skis. To install bindings on roller skis, you need the same set of tools as for installing on regular skis:
1. Special jig or template for mounting fixtures
Conductors under various systems mounts are different, be sure to pay attention to this (SNS and NNN). The jig for installing bindings on roller skis is shorter than for installing skis.
2. Drill for installing fasteners
On sale you can find special drills with a limiter, for example, Rottefella drills for 3.7 mm for skis and 4.1 mm for metal ski rollers. If there is no special drill, then it will do. conventional drill for metal. Many sources recommend installing 4 mm fasteners with a drill, but from experience we recommend 4.5 mm. Screws go into such holes easier and hold tight. If there is only a standard Rottefella 3.7 or 4.1 mm, then it is better to widen the holes by placing the drill at an angle. You can lubricate the screw with any household lubricant or machine oil, some recommend using holding ski wax. Otherwise, screwing the screw will be very difficult.
note that screws are included with NIS platforms bigger size and under them it is better to drill holes of 5 mm.
3. Screwdriver and screwdriver for tightening
Left standard PH, right - PZ
1. Unlike skis, there is no need to look for balance on rollers. Bindings are placed so that the heel of the boot is close to the mudguard of the rear wheel.
2. We apply fasteners to the frame of the roller and mark the front hole or the axis of the boot. If it is more convenient, you can mark the hole for the heel and set the template along it.
3. We install the conductor according to the marking and drill the necessary holes.
4. Screw the mount. Screws go into the metal very tight - this is normal ..
Advice:
On the bindings, it is better to change the flexor to Hard (hard), and on the SNS pilot, increase the spring force so that the roller does not sag too much from the heel of the boot.
In the online store, the site presents bindings for roller skis in two price segments:
- Shamov products, which we consider the best offer for children and beginner athletes. For relatively low price offer functional devices decent quality.
- The premium segment of the catalog is represented by fasteners from the world's leading manufacturers.
We offer two types of mounts: NNN and SNS. Outwardly, they are similar in design, but the boots do not match mutually. A separate species, SNS Pilot, features a fundamentally different flexor system.
How to choose mounts
Question answer
- What bindings are used on roller skis?
- There are three types of mounts: classic, ridge and combined. The latter are considered universal - they are equally suitable for classic and skating.
- Is it possible to install ski bindings on roller skis?
- Yes, it is technically possible. But it should be remembered that bindings designed specifically for roller skis are designed for increased loads on the points of attachment to the rollers and on the bolts with which the boots are screwed. It is more dangerous to fall on asphalt than on snow, so the safety requirements are higher.
- How to install fasteners?
- We advise you to order the installation in the service workshop of the company site. Everything will be installed correctly for you and the sticks will be adjusted according to your height.
- What is the difference between Russian and imported ones?
- Budget Russian mounts are universal and suitable for both skating and classic. The use of such mounts is allowed at the initial levels of skill. Imported ones are accentuated into classic and ridge ones. The mechanics of their work are different, because each style requires a corresponding trajectory of movement of the elements of the mechanism. The fixation of boots in imported bindings is better. Suitable for professional athletes.
- What is the difference between special ski-roller bindings?
- Roller ski bindings are more firmly attached, have a reinforced structure and ensure that the boot is fixed in a given trajectory of movement.
Do you have any questions?
Ask them to the manager trading floor, by phone or online chat. You will receive advice not from an ordinary seller, but from an active skier. The advice of our consultants is based on personal experience and exhaustive knowledge of inventory characteristics.
