Fresh pumpkin is ideal for preparing unusual dishes. She can...
Publication 2017-11-03 Liked 12 Views 17675 Talk...
Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 2 of issue No. 41 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of May 28, 2002 N 37
(As amended by the Order of the Ministry of Health and Social Development of the Russian Federation dated November 11, 2008 N 640)
Job Description. Maintenance of the HDTV installation in accordance with the specified technological regime. Laying, heating, pressing, cooling and unloading of glass products. Participation in the installation, unloading of the pot and the ebb of the glass melt on the casting table. Maintenance of site electrical equipment. Repair of the main components of the HDTV installation. Supervision of the operation of instrumentation. Generator mode selection. Accounting for the loading of the installation and the output of glass products.
Must know: device, scheme and rules for controlling the HDTV installation; the mode of heating and pressing of glass products, the scheme for switching on measuring instruments and the limiting values \u200b\u200bof their readings; types of marriage and measures to prevent it.
The given tariff and qualification characteristics of the profession " HDTV installation operator» are used to rate work and assign wage categories in accordance with Article 143 of the Labor Code of the Russian Federation. Based on the above characteristics of work and the requirements for professional knowledge and skills, a job description for the operator of the HDTV installation is compiled, as well as documents required for interviewing and testing when applying for a job. When compiling work (job) instructions, pay attention to the general provisions and recommendations for this issue of ETKS (see.
Stretch ceiling structures made of synthetic materials (polyvinyl chloride) look impressive and last a long time. They have a long service life.
The material comes from the manufacturer in rolls. The length of the skein is not more than three meters. Much more is needed to cover the ceiling. Companies that are engaged in the installation of stretch ceilings are forced to lengthen the synthetic material using special HDTV machines. The equipment welds the film using high frequency current. Therefore, the machine is called so.
The equipment is expensive not only because it is imported, but also due to its electronic, technical content. The work is practically automated. But in practice, two people serve the HDTV machine - an operator and an assistant.
It is worth noting that there is a lot of equipment for welding PVC film, but the HDTV machine remains unsurpassed in this business in many respects. Has in its design:
High performance equipment. During the shift, the HDTV machine is able to perform a large amount of work. The process can be programmed, which makes it easier for the operator to complete the task. The high-frequency machine is universal. It is easy to get synthetic film of any metric size on it.
With the help of a HDTV machine, it is easy to “weave” a synthetic fabric. It is no problem to get a ceiling covering for large areas. Setting up the equipment is simple. By setting the automatic film sealing mode, you can significantly increase the productivity of the machine. This is assisted by a control unit, which makes it easy to provide a unique automatic setting of the equipment.
As a result, shops for the production of seamless synthetic stretch ceilings are not only being built, but are successfully developing. For companies engaged in the manufacture of stretch ceilings from synthetic films, the HDTV machine is a real find. It is easy to put the business on an industrial basis and make a profit.
Considering other advantages of HDTV equipment, it is necessary to note its safety. The machine is provided with a system for suppressing the occurrence of an electric arc, since its appearance between the electrodes is an extremely undesirable phenomenon that can catastrophically damage the synthetic film. An electronic circuit integrated into the control unit automatically reduces the power of the HDTV in the event of a rudimentary spark.
The machine is protected from interference. The equipment is equipped with devices that suppress magnetic scattering. There are clamps of high electric frequencies. HDTV equipment is screened from other machines and systems.
The installed electric current relay will turn off the equipment in the event of a sudden increase in voltage or minimize its effect on the operation of the machine.
The workplace of the operator and his assistant is free. Nothing prevents the production of finished products. This is one of the dominant features of the design composition of the HDTV machine. It is open for maintenance, there are no hard-to-reach areas for minor and major repairs.
The aesthetics of the HDTV machine are excellent. There are no sharp corners, the protection of dangerous nodes is made according to European patterns and remains unsurpassed today.
Manufacturers of high frequency equipment design and build machines with a high coefficient of performance. HDTV machines are designed for industrial use. Their performance is fully consistent with a priori goals. The fact is that such machines not only weld stretch ceilings, but they are used for mass production:
As you can see, the range of use of HDTV machines is large. No one would dare to create innovative equipment only for welding stretch ceilings. Based on the foregoing, the performance of the equipment is high. The uniqueness of HDTV machines is that when changing production from one type of product to another, it is not required to re-equip the equipment. This also increases the productivity of the machines.
An operator trained for this business is capable of ensuring the high-quality operation of the machine. The person is undergoing special training. Knowledge of all technological switching, compliance with the rules of operation of the machine, ensures the productive operation of the equipment. To start the machine in operation, it is necessary;
For the productive use of the equipment, the listed manipulations are enough to complete the production task.
After finishing work, the operator must clean the machine from the remnants of the welded material, turn off the power.
In order to use high-frequency welding equipment productively and for a long time, it is necessary to know the principle of its operation. And it is based on a unique method of heating the surfaces of the material. That is, on the dielectric heating of a synthetic film, which is 100% non-conductive. A special machine unit welds the sides of the prepared material, ensuring a seamless connection. The sides are welded with or without filler material.
The seamless connection of the sides of the web occurs in a thermal environment created by capacitor plates (electrodes). The capacitor is integrated into the oscillatory mechanism of the generator, which produces RF. The electrodes are not only elements for supplying current, but also perform the function of pressing the sides of the material, standard cooling of the web for stretch ceilings.
note
Welding of synthetic film material can be carried out at a dielectric loss factor of 0.1. Such materials include:
On the machine, you can use various electrodes, focusing on their choice according to the thickness of the material to be welded. The functionality of the HDTV machine is such that it is possible to create manipulations depending on the electrodes used. This creates conditions for adjusting the length of the working area.
Using HDTV machines, companies solve many production problems. They increase financial viability, provide people with services, products that are always liquid.
There are no similar posts, but there are more interesting ones.
Stretch ceiling structures made of PVC films have an excellent appearance, as evidenced by the photos on the site, and excellent performance. At the same time, the rolls of material do not exceed three meters, so there is a need to connect the strips of the fabric into a single surface. For this, companies specializing in the production and installation of tension systems have at their disposal special equipment. Welding of fabrics is carried out with high frequency current, for which high-frequency machines for stretch ceilings are used.
The equipment for creating tension webs allows you to get an almost invisible seam at the exit at the junction of the material strips. In terms of strength, it does not differ from the integral section. The edges of the welded pieces of material under the influence of high-frequency current are heated and connected, and after they cool down, an even and very strong seam is formed, which is almost invisible.
Among the equipment intended for the production of PVC films, high-frequency machines for stretch ceilings with a movable body and a pneumatic drive stand out. They are able to process a large number of products per shift. This modern equipment can be programmed and thus the work of the operator working on such a machine is greatly simplified.
The HDTV machine for stretch ceilings allows you to make a canvas of almost any size, including for very large ceiling structures. At the same time, the ease of setting up the equipment and performing most of the welding process in automatic mode saves time and increases operator productivity.
The HDTV machine for the manufacture of stretch fabrics consists of the following main components:
In the HDTV production workshop, the stretch ceiling machine is operated by one operator, who is trained to work on it. The principle of operation of the equipment for connecting tension webs is based on dielectric heating of the webs prepared for welding. In this case, the process can be carried out using filler material and without it.
The advantage of using an additive lies in the high speed of welding, uniformity and the ability to selectively supply heat. The soldering is made between metal electrodes - they are also called capacitor plates, it is included in the oscillatory circuit of a tube generator tuned to a high frequency. Electrodes are required not only to supply electricity to the joint, but also to apply pressure on the web and to cool the surface of the material. The seam with the capacitor plates can be welded completely in just one operation. A series connection using a rectangular electrode forms seams of great length.
The machine for stretch ceilings allows you to get almost imperceptible seams, regardless of the same color were the components of the fabric or different. Welding using high frequency current is performed with polymeric materials with a dielectric loss factor of more than 0.01. These include polyurethane, polyvinyl chloride and others.
If materials that have a lower coefficient are joined, contact dielectric welding is used, during which one of the above polymers must be applied to the electrodes, as a result, overlap or T-shaped seams are obtained. To perform butt welding, schemes with one-sided or two-sided arrangement of metal electrodes are used. The flexible HDTV setting of the machine allows, depending on the type of electrode used, to adjust the distance in the working area.
The technology for welding fabrics for stretch ceilings on HDTV machines involves the use of different electrodes depending on the thickness of the PVC film. The fabric produced using such equipment is reliable and retains its original aesthetic characteristics after the welding process is completed.
HDTV machine for the production of stretch ceilings, see the video:
The HDTV machine is also used in practice for the manufacture of airbags installed in cars, beach bags, stationery, some types of shoes, rain and sun umbrellas.
You won’t surprise anyone with a stretch ceiling for a long time, but not everyone knows that their production is a consistent and rather complicated process, which is simply impossible to perform without specialized equipment. In this case, this is a machine for soldering stretch ceilings.
Welding of PVC film is carried out with high-frequency current - hence the name "HDTV machine". The instructions in this article will introduce you in general terms to soldering technology.
Your attention will also be offered a video on the topic: "Machine for stretch ceilings."
High-frequency soldering of the film is considered today to be the most high-quality way of joining polyvinylchloride cloths. At the same time, the seams are not only sealed, but also almost invisible.
The creation of a strong welded joint is the main requirement for HDTV machines:
All HDTV machines are equipped with magnetic diffusers that suppress the interference created by electromagnetic radiation and interfere with the operation of other electrical devices. In fact, the surrounding workspace is carefully shielded.
And, of course, it is impossible to do without a fuse. From power surges in the network, the machine is protected by a special relay.
As with any welding, electrodes are also used here, only of a special kind. They look like a flat metal ruler, one edge of which is clamped in the press, and the second affects the material being welded.
Take a look at the photo below - you can clearly see how this happens: the edges of the film are aligned, and the red line shows where the seam will go.
But not every polymeric material lends itself well to this type of welding. The more polyvinyl chloride it contains, the better. Its minimum content in tissue is 30%.
Materials containing polyester, polyethylene and polypropylene are unsuitable for HFC welding.
By itself, HDTV machines are quite simple and reliable in operation. There are two types of drives in them: foot or pneumatic.
They can be programmed to perform several operations. The duration of the welding process and the pressure of the press are also regulated, and all this is done using the control unit.
In principle, the method of welding PVC film can be not only spot, but also roller. It looks like this: two rotating disks evenly move the material, increasing pressure and temperature.
In this case, the appearance of the weld may differ significantly, but this does not affect the quality of the joint.
In this case, two types of canvas are welded, differing not only in color, but also in surface texture: one is glossy, the other is matte. So you can make a rainbow, and a checkerboard, and a geometric pattern made up of triangles.
It turns out very beautifully, the main thing is that the quality of welding is excellent.