Repair of the liner in the bath yourself. How to install an acrylic insert in the bath: instructions for installing the liner

Compared to other methods of repairing bathtubs, an acrylic insert looks preferable in all respects (see), but nothing lasts forever, and at some point the inner surface of the font will require another repair. In such circumstances, our customers often ask the question: is it possible to replace the acrylic liner or will the bathtub have to be completely changed? Indeed, the question is important and interesting, and in our today's article we will try to answer it as fully as possible. So, to business!

Why is repair needed?

Here are the main reasons why you may need to replace the acrylic insert in the bath:

• Mechanical damage to the surface due to falling heavy objects. As a result, even high-quality acrylic can simply burst or crack.
• Scratches or abrasions from animal claws, rough handling, exposure to abrasive detergents, etc.
• Bloating, water ingress under the liner due to poor-quality installation.
• Chemical damage to plastic (e.g. from aggressive cleaning agents).

note: on acrylic liners, installed by specialists"TeploDoma", the company's guarantee is valid. If the need for replacement arose through no fault of the tenants during the warranty period - contact our consultants!

Replacement of the acrylic liner is possible!

Fortunately, in most cases, replacing an acrylic bathroom liner is possible, regardless of the cause of the damage. This will require:

• Dismantle the old insert, drain-overflow and drain. Please note that if, after installing the liner, you overlaid its edges with tiles, then it will have to be removed.
• To clear a surface of a basis of assembly foam and other possible stratifications.
• Install the acrylic liner in the standard manner, using special means. You can read more about installation technology.

In the event that for the first time you ordered an acrylic bath in a bath from us, the replacement of the liner will be valid special discount. Learn more from our consultants!

Or do you want to change the bathroom?

There are cases when it is possible, but not entirely advisable, to replace the acrylic liner in the bathtub. And sometimes it's completely impossible. These situations make sense:

• If cast iron is installed under the bath sewer drain, which has long exhausted its service life, then it makes sense to replace it along with the bathroom. The same applies to the situation when the drain is installed new, and the pipes are old. As practice shows, it will not be possible to save the drain, since it is designed for a one-time installation. Do not forget that sewer pipes designed for 25 years of operation. Using them for longer is risky in terms of leaks, ruptures and other troubles with large-scale consequences.
• The steel or cast iron bath itself has already exhausted its normative term use and needs to be replaced.
• Removal of the old insert is associated with the dismantling of finishes and plumbing. Given the costs involved in this case, it may be more appropriate

A few years ago, the service of restoration of a bathtub with an acrylic liner was quite in demand and popular. The method consisted in the fact that a structure was installed in the bath, completely repeating its shape. After some time, the owners of such baths often face the following problems: cracks on the sides, at the bottom of the bath, as well as peeling of the liner. Unfortunately, such defects make the bath unusable. In this case, do not rush to say goodbye to the bathroom - its replacement can cost a large amount. Order a bathroom restoration service bulk acrylic, and she will again shine with whiteness and will delight with her beauty for many years. And for starters, you will have to dismantle the acrylic liner, which the Moscow Acryl company will gladly help you with.

Quick and high-quality dismantling of the liner.

The work of dismantling the liner requires special skills, knowledge, responsibility and clarity. Our specialists are ready to perform the work at an impeccable level. The cost of the service is only 1000 rubles!

So, the dismantling of the liner is carried out as follows:

If there is a corner, it is chipped off, since it will not allow the liner to be dismantled;

The surface of the liner is cut with a grinder in the form of a grid, which makes it easier to dismantle;

The liner is being dismantled;

After dismantling, the surface of the bath is cleaned of sealant and old foam.

Company " Moscow Acrylic» invites to mutually beneficial cooperation everyone who needs to dismantle the liner or restore the bathtub with bulk acrylic. You will certainly be satisfied with the result! We are waiting for your applications!

Over time, the surface of your bath turned yellow and lost its appearance, and you don’t have the financial means to replace plumbing? Installing an acrylic insert in the bath will be an effective, fast and reliable solution to your problem. The liner is great for most types of bathtubs (steel, cast iron, acrylic). Here you can order an acrylic liner in the bathroom cheaply in Moscow with a length of 1.5m and 1.7m.

The restoration technology using an acrylic liner will allow you to restore your plumbing to its former whiteness and attractive appearance without the need to replace the old one. In the process of work, our craftsmen use ISKomp liners, which have been produced in Russia since 1997 and have the necessary hygienic certificates. All works are performed by masters with more than 3 years experience.

​

Acrylic liners ISKomp are distinguished by the following advantages:

• long service life (up to 15 years);
• impact resistance, heat resistance, environmental friendliness;
• simplicity, ease of care (an ordinary sponge with detergent);
• the coating does not turn yellow, does not crack over time;
• the liner keeps heat longer due to low thermal conductivity;
• excellent sound insulation when filling the bath;
• presentable appearance;
• high antibacterial, anticorrosive properties.

For an acrylic liner in the bathtub, the price is already indicated together with the installation and is 4800 and 5100 rubles for a 1.5m and 1.7m bath, respectively. It already includes work on preparing the surface of the bath, installing the liner, expendable materials, delivery within the Moscow Ring Road, rise to the floor. Here you can order an acrylic liner in the bath color (blue, light green, pink) or white.

Install a colored acrylic liner in the bathroom inexpensively

The liner is an exact copy of the geometry of the bathtub, made of sheet plastic with a thickness of about 6 millimeters and covered with high-strength acrylic. He is distinguished by high strength characteristics and long service life (10-15 years). When ordering restoration services in our company, you get a guarantee for a period of 3 years. If necessary, the restoration of the coating by this method can be carried out again - the dismantling and replacement of the acrylic liner is carried out strictly in compliance with current requirements.

To carry out the work, you just have to leave a request on our website. You can measure yourself using our instructions in the order and payment section. And if there are difficulties, then you can call the measurer (the departure of the measurer is paid in the amount of 500 rubles). Our masters work every day from 09:00 to 21:00. The earliest departure time is the next day after the receipt of the application.

For baths custom sizes, With decorative elements, handles recommend using the restoration of liquid acrylic. Unlike inserts, this technology is characterized by simplicity, minimal risk of defects during installation, favorable cost, and versatility. It is not always possible to put an acrylic liner in a non-standard model bath, but acrylic will cope with the task of restoring such a product for five plus.

Order an acrylic liner in a cast-iron bath

For a bathtub cover, an acrylic liner, the cost is indicated in the price section. All installation work are carried out at home without the need to dismantle plumbing, the process takes an average of two hours. Plumbing can be used already 24 hours after the restoration work (during this time polyurethane foam achieves the desired performance).

The process of installing an acrylic liner in a bath consists of the following steps:

1. Removal of drain and overflow, old sides, surface preparation.
2. Application of two-component foam on the sides and bottom, sealing of technological drain-overflow holes.
3. Insert installation.
4. Installing drain and overflow grates.
5. Filling the bathtub with water to improve the adhesion of surfaces.
6. Installation of a decorative border.

Within a day you will be able to evaluate all the advantages of the new acrylic coating your plumbing. For an acrylic liner in the bathroom, the cost, along with installation and other related work (for example, dismantling the old liner), will be accurately calculated by an employee of the Akrilsk company. Order it for cast iron bath you can already today.

Compliance with the rules of care guarantees you the preservation appearance acrylic insert for years to come:

1. When cleaning the surface, do not use aggressive and abrasive cleaners, hard brushes that can damage the acrylic surface.
2. Great for washing laundry soap and soft sponge.
3. After washing, rinse the bath, wipe with a dry cloth.
4. Avoid falling sharp and heavy objects, exposure to aggressive media (acids, alkalis, strong dyes, solvents).
5. It is not recommended to install stools and basins on the bottom without first laying a soft cloth.

How much does it cost to insert an acrylic liner into a bathtub in Moscow and the region? Price with installation

Acrylic bath insert for sale with installation - the cost of the insert and services depends on the size of the bathroom. The minimum price tag is 4800 rubles.

Do you want to restore the good old bath to its impeccable look? Give us a call and we will definitely help you!