"The woman is created for a man, not a man for a woman" - such a postulate ...
As often, being at home, in the office or on the road, we cannot remember where they put our phone. So that this does not happen, you should get comfortable and ergonomic stands that can be made independently. The stand for the phone can be made with your own hands from the most unexpected girlfriends. How to do this, will tell our step-by-step master class.
How to make a stand for your own hands: Options for office and auto
Being in the workplace or in a car, we all need to always be in touch. At the same time, I do not want to spend a lot of money on expensive stands, because they can be made from the cast and served their terms.
Stand from the card.The easiest option of the telephone holder is a stand from the card. To make it, it is necessary to gently bend an unnecessary plastic card in two places, as shown in the photo below, not allowing it to break.
Experience shows that the plastic card stand is very reliable and withstands even the airline at the moment of severe turbulence.
Stand from stationery clamps.For the manufacture of a stand for a phone from stationery clamps or from binders, as they are also called, one big and one small clamp will be required. The legs of the small clamp should be placed between the holding part of the large clamp and put the resulting design on the table so that the larger clamp relieves on its surface.
Similar supports can be made in five minutes from clothespins for linen.
From paper clips, a great version of the stand for cars is obtained. For its manufacture, it is necessary to disassemble the clip of a large size and slightly bend the metal parts, as shown in the photo below.
In order not to damage the surface of the phone, metal fastenings are recommended to wind into several layers. We return holders to the place, additionally fasten them with a sticky ribbon and stationery. Breeping clamp on ventilation blinds. The phone is securely attached between the metal parts of the binder.
Paper stand.The usual office paper, folded in a certain way, can withstand even the weight of a large smartphone. To make a paper stand, you need to measure the size of the phone and adjust the pattern below.
Cut the part of the paper, fold it on dotted lines and insert the side parts in the slot. This design is good because it allows you to charge the phone without removing it from the stand.
We study the popular options for home coats
The desktop stand for the house should be not only convenient, but also durable, stylish and well fit into the interior of the dwelling. Consider options for such products.
Stand from newspaper tubes.The stand for the phone from newspaper tubes will become a wonderful gift and an excellent decoration of any interior.
To rinse such a stand, you will need a few colored in advance of long newspaper tubes, scissors, knitting needles, some glue and varnish.
Six blanks, we have parallel to each other at a distance of approximately 1-1.5 cm and firmly fix them in the machine or in any convenient way. In extreme raskirts, we lay the needles or wire to make it easier to form smooth and neat contours of the product. We begin to told the base of the working tube in the "Rope" technique or a terminal weaving. Follow the parallelism of the rows and, if necessary, we rinse them with glue for better fixation.
We ride a rectangular workpiece required length. Take out the needles or wire. The tips of the racks accurately refuel and cut. Give the workpiece the necessary curved shape, if necessary, a slightly wetting it with water.
Similarly, we ride the leg of the stand on a smaller number of tubes. Introducing the finished leg, install on the main part and fix its stores between the rows of the stand. Superior cut and hide. We wash the product with glue, if you wish, additionally stain and cover 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.
Stand from Origami modules.Modular origami is a fairly young, but very popular view of the needlework. With it, you can make many unusual and original things, including a stand for a phone from modules.
For the manufacture of the stand, two-sided paper of blue and pink color will be required. Cut the sheets on the workpiece and fold the modules.
Weaving start with the base of the stand. It will take 28 blue modules to be needed to be combined with each other and closer to the ring. Similarly, we make another three rows. From the fifth row, we reduce the number of modules per 1, 2, 3, 4 pieces. In the seventh row we put one pink module in the middle.
In the eighth row, we put 6 modules, make a pass, 10 more modules, skip, 6 modules. The number of pink modules - 2 pieces. In the next row on the pink plot, we put three pink modules. We begin to make a curly edge of the stand, as shown in the photo below.
In the back we form a pattern in the form of a heart, over which we install a row of blue modules. We gradually narrow the stand since the triangular wedge is not formed in its back.
Stand from modules is ready!
Video on the topic
We offer to see the following video lessons on the manufacture of other supports under the phone.
Stand- Useful and comfortable thing in everyday life. For example, phones or tablets that have become an integral part of our daily life, in stationary conditions are a bit uncomfortable in use. If you do not have a proprietary or suitable case that can fix the gadget in the inclined position, then you will have to hold it with your hands. It is inconvenient with long watching of the film, while eating or long reading.
The best solution to this problem can be a purchase specifically designed for this stand. But, sometimes, she needs it right now, or simply sorry for money on, it would seem, a temporary thing. In this case, it is possible to make a stand alone from the remedies. It does not take much time! A couple of minutes and you can comfortably settle down in front of the screen of your gadget, while freeing your hands.
In this article, we will rely primarily on the options for the stands for the phone, but they can also be slightly upgraded and used for tablets, books, even for pictures or plates. It all depends only on your imagination. But if she sleeps, then nothing terrible in it. The options proposed in the article are dismantled in detail, and you will not be much difficulty. A little to increase the size specifically for the thing for which you make a stand.
Screening materials to help
You can independently make a stand from the girlfriend. For this, almost any material that you have at home is suitable. It may be:
- wire
- cardboard
- cardboard box
- fabric and fabric
- bottle
- wood
- paper
- the pencils
- constructor
- stationery holders
- unnecessary plastic cards
- old podcast
Only fantasy can limit you in choosing. Of course, there are a huge selection of products in this category. Nevertheless, the manufacture of the holder independently has a number of indisputable advantages:
- Rapidity. Sometimes the stand is needed as soon as possible, and there is no time to go to the store for her purchase.
- Cheap or free. Make the holder can be from what is already in your home.
- Originality. With your own hands, you will create a truly unique product.
Stand for the phone from pencils
In order to collect this design, you will need:
- 6 pencils
- 4 stationery rubber bands
Despite the intricate appearance, this design is going very simple. The bottom line is that two pencils are fastened with a rubber band at the ends, and the third pencil is dyed between the tips of the gum. As a result, a geometric figure is a tetrahedron. If you have any questions, how to make this version of the stand, then use the example below.
The figure is clearly shown, how the pencils are bonded.
To avoid slipping and give a greater stability of the stand, use pencils at the ends of which there are erases.
Stand for the phone from stationery clips
The most economical and simple version of the stand, to create which you only need the stationery clip.
To do this, you need to bend it in the same figure as in the figure.
This design will keep the phone without any problems.
Plastic card phone stand
For this, any unnecessary plastic card will suit. Just bend it along the short side, retreating from the edge of approximately 1 cm, and the remaining portion bent in the opposite direction exactly in half. You will do as shown in the picture.
Stand for the phone or tablet from cardboard
Cardboard- Excellent material that is widely used for various homemade "pins". Probably, many at home there is a cardboard box or an unnecessary cardboard sheet. It is worth trying to use it and to create a stand.
To do this, you need:
- cardboard
- scissors
From a sheet of cardboard, folded in half, cut off the lane of 10 by 10 cm. Then you draw on it shown in the figure shape and cut it down the contour.
You will have a convenient and stable stand that can be worn with you.
This version of the holder can be used for a tablet or book. The essence of the manufacture is the same, only it is necessary to fit the part for the sizes of your gadget, as shown in the figure.
It is necessary to use well-bending cardboard so that the stand is not "revealed."
It is important to understand that a cardboard stand is not necessarily an inaccient design of brown. It can be stylish, comfortable and beautiful. You just need to change the form and the result will change dramatically.
Origami-stand for the phone from paper
You may have no cardboard at home, but there is a dense paper. For the manufacture of the stand will fit and she! To do this, you will need only paper and scissors. Cut out the figure according to the scheme below, after which fold along the folding lines.
That's all. Origami-stand is ready to use.
Wire stand for phone or tablet
One of the budget variants made of infirm materials.
During work you will need:
- wire thick 2-3 mm
- pliers
- lamps to cut off wire
It all is done as simple as possible: in the right places the wire bends so that the holder turned out to be from it.
So that the design is more stable, the wire can be connected to the stationery.
Such a stand can be a real designer solution: it can be painted in another color and it will completely transform, and you can fill the "emptiness" with decorative wire curls. This design is suitable for both the phone and the tablet, the difference only in the sizes of your gadget.
Unusual stand for phone from Lego
Probably, this option of the stand will especially like adolescents and men. Here you can show your fantasy by creating a whole complex for your smartphone with the possibility of changing the position, and maybe even with the strengthening of the speaker's sound, or cost the minimum of parts. The creative process will not only deliver pleasure, but will benefit.
To make such a design, you will need several parts and the base. The tilt level can be changed by adding or removing the part. And the position of the gadget is easy to change, just adjusting the design.
Stand for the phone from the old podcast
Perhaps the old cassetnik was poured at someone at home. It is unlikely that it is ever come in handy, and nobody uses cassettes with the advent of discs and electronic media. But still, you can find the use of the cover in which there was a cassette.
To do this, it is enough to "unscrew" a cassette on the wrong way, throwing the cover back. In the hole in which the cassette kept, you can put the phone. From the advantages of this design, you can call what it is easy to wash and it is transparent.
Plastic bottle phone stand
Many of us go on a journey or drive in the train. Often, there is nothing in the trains next to the sockets, where it would be possible to securely place the phone. Nevertheless, the gadget is discharged and necessary to charge it. It is possible to simplify this task with a stand made from the bottle. Its essence is that the gadget is placed in a cut-off day of the bottle, which remains hanging on the plug from the device for charging. Thus, you do not need to stand next to and keep a phone in your hands or look for a way to fix it.
For the manufacture of such a stand-holder you will need:
- plastic bottle from shampoo or beverage
- scissors
First, wash the bottle to remove the remnants of the cosmetic or soda. Then, apply markup on it. The rear wall of the stand should be a certain handle on which the phone holder will hang. The front wall at the same time should be high enough so that the phone does not fall through the edge. The next step cut the stand on the office.
To do this, it will be more convenient to use a sharp stationery knife.
Cut the hole at the top of the handle so that it can be fixed behind the charger fork. You can decorate the stand for every taste: with the help of adhesive paper, paints or stickers.
Stand for a telephone or tablet
If you want to make the original stand, then a tree can be called one of the good materials for its manufacture. Such a stand will be durable, durable, as well as can serve as a good gift to the close person. It is important to understand that work with a tree requires some minimal skills and special tools.
In the process of work other than a wooden bar, you may need materials such as:
- lobzik
- sandpaper
- tree cutting knives
Be careful and attentive while working with such tools.
Stages of manufacturing stand:
- Treat wooden bar, spitting unnecessary parts and making recession in the middle for the phone or tablet.
- With the help of sandpaper, remove all roughness and offering from the surface of the future holder.
- You can cover the finished product with varnish or special paint.
Another option for a wooden stand under the phone or tablet can be called analogue of its cardboard option. In this case, instead of a wooden bar, it is better to use Phaneur.
To do this, make the stencil "legs" of the holder and the crossbar, which will fasten them together. And transfer it to Phaneur. Gently cut down the jigsaw and grate the sandpaper of irregularity and roughness. With the help of super glue, connect the legs and the crossbar.
Case standing with your own hands for your phone or tablet
The most popular option for the gadget is a standing stand. It will have to tinker with him, but the result is worth it. This option is convenient to take with you in travel, it is durable and can protect the screen.
For the manufacture of such a holder you will need:
- facing material, best to choose skin
- material for inner cladding
- simple and tight cardboard or hard material
- rubber for fasteners
- pencil
- rule
- scissors
- scotch bilateral
How to do it?
- Cardboard do trust in accordance with the size of the tablet, so that it completely covers it. This is a future basis, the sizes of which will be basic for all elements.
- Make a few folds in such a way as the front part of the cover will be bent to support the tablet.
- Now we take the hard material, which will be sustainable sustainability. Sut it so that it repeats the contour of the workpiece.
- Apply to the base and make edging, so that it does not interfere with the bends.
- From the inside, we process the cover with soft materials by gluing to the basic billet bilateral scotch.
- The next step is fasteners for the tablet itself. To do this, we make small holes in rigid elements for gum, which will keep the tablet.
- From the outer side we glue the finishing material.
Do it most carefully. From this will depend on the appearance of the product.
That's all. Stand ready! It is convenient and can be used not only as a holder, but also to protect the screen.
Stand Pouch under the tablet or phone
Original and cute version of the gadget. It is suitable for girls and can become a pretty home accessory.
For the manufacture you will need:
- scissors
- the cloth
- putting material
- tight cardboard
- threads and needle
- button
Manufacturing process:
- First you need to cut the template from the cardboard in the size of your gadget.
- Then cut the rectangle from the fabric twice the resulting template.
- Fold from the fabric to lay down in half and make a stitch fold 10 cm from the edge.
- Sew the bag, leaving not sour cream one of the sides.
- After turning the bag, place it so that the seam passed through the middle, and at the end it turned out a rhombus. Signing it with an iron, bend the upper corner of the rhombus so that it is in the middle and the trick. This is shown in Read more.
- Then insert the cardboard in the product and the remaining space fill in the stuffing material.
- At the very edge of the template, make a seam. Bending the edges of the non-sewn side, carefully finish it, leaving the hole for packing.
- Make a roller and squeeze the hole.
That's all. The product is ready. You can decorate it to your taste, giving him even greater charm!
Stand for the phone from stationery clamps
Another interesting and at the same time is a very simple option. If you have several stationery clamps at home, then boldly use them!
You need 2 clamps: one is more, and another smaller. By connecting them between them, as shown in the figure, in a couple of seconds you will receive a holder under the phone.
It can also be made of two clamps of the same size.
Stand for phone from an unnecessary CD disc
The stand for the phone can serve as an unnecessary CD. In order to make such a holder, you will need some time and work with temperature. So be careful!
Conclusion
For a creative person, all boundaries are erased. And any item he can create with his own hands from the primary materials. For a stand, you can use such options such as an ordinary office cruise card reader, or all of us well-known from the school time stand under the book, even the bushing from toilet paper can be an excellent version of the holder.
There are many opportunities for creativity, you just need to look around carefully. Maybe you will make the most unusual accessory for a smartphone with your own hands!
In the world of modern technologies, it is difficult to submit a person who has no mobile phone. With the entry of gadgets to our lives, accessories that are huge many on store shelves and on the Internet appeared. Often the usual holder, the case and other things for giving the mobile device and style is far from cheap. Therefore, the stand under the phone, with your own hands, is a great solution for everyone.
Do not make the accessory at all. To implement the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what the most like best. So it should be included fantasy and put into the course of all ideas.
What can be done under mobile?
Creating something independently gives ample opportunities for creativity. Stand for the phone, with your own hands, can be made of the following materials:- paper; wood; plastic; gypsum; any natural materials.
Stand for your phone with your hands
It would seem that you can do from ordinary leaves? In fact, an excellent stand for the phone may turn out of this material. It is not difficult to create it at all. To get started, you need to prepare the following items:- colorful paper or white, which will then be decorated; Multicolored gouache, watercolor or acrylic paint; glue; Line for measurements; simple pencil; scissors; various decorative decorations that will be appropriate, also worth keeping at hand.
Properly organized space will help make it so that the stand for the phone will be framed in a matter of minutes. Therefore, at the one who embodied her, the excellent opportunity to become the owner of a beautiful and convenient accessory for mobile. Sequencing:
- First you need to come up with which form will be the stand. After you need to draw the templates of the desired dimensions on the sheet. It is cut from it elements for the product. Caution Caution according to the scheme that was previously drawn or printed from some site, glue the necessary details. Wait until all the elements are enshrined. The next step is to connect separate parts between themselves. Let all fasteners are dry. After that, you can proceed to decorating the product. At this stage, you can start various brinets, butt, beads and other small beautiful elements. After decorating, the finished stand for the phone can be considered. We created a masterpiece with your own hands. With the advent of such a device, there will never be a problem with the search for mobile, because it will always be in my place.
Stand for the phone from the tree do it yourself
There is a lot of options using which you can implement any idea. Why is the wooden holder better? The stand for the phone from such a material creates competition with paper products. The tree is stronger, stable and more durable. True, to make a wooden stand, one sketches and ideas will not cost. In this case, you also need:- special equipment; skills; skill working with wood.
- the tree from which the design will be constructed; Tools for working with a tree; product scheme; Flomaster, which can be drawn on a tree; ruler; glue; accessories (buttons, beads, rivets); simple pencil.
After all the necessary elements were at hand, it is possible to proceed to the immediate implementation of the intended. The following sequence is as follows: - First you need to find a suitable scheme for the product. The press is required on a wooden basis to put marks for which the connector will be cut down. The next step is to cut the shape to the existing tool. It is necessary to conduct control measurements and find out whether the mobile phone is placed in the cut-out connector. After It is necessary to glue harvested parts. The next step is to give the smoothness of the product. This can be made with a file or a special device operating from the network. When the surface is smooth, you can figure out the finished shape with some color. After painting, it is necessary to wait for the product to dry out. Works work with gluing accessories selected for this mission. In the end, the finished design should be Open lacquer, which will give shine and aesthetics.
Beautiful layout of the stand under the phone
In no case should not forget about the decor. After all, it is the decoration that even the most unprofessional and amateur product will give him a flavor, character and mood. Therefore, it is worth seeing what interesting accessories are at home. It can be:- shells; buttons; rhinestones; beads; foil; Color tape.
In general, everything that is at hand and has an unusual look, can come in handy in the process of making a stand for the phone. Not only the necessary accessory, but also a great gift
I finish, you can not only use this product for yourself, but also to give. Therefore, it is worth making some spare supports: suddenly someone suddenly calls to visit, and there will be nothing to give! And the stand under the mobile phone is always useful, even if a person already has one, the second will never hurt.It is impossible to imagine a person who would have no mobile ...
Now it is almost impossible to imagine a person who does not have such a technical device as a mobile phone.
With the invention of this technology, life has simplified significantly: If you need to urgently call, the phone is always with you, besides this, it is also much easier to find someone ... In general, it makes no sense to describe all the advantages of a mobile phone, as they are really obvious and do not need advertising.
However, today, when we are talking about mobile phones, most often we mean modern smartphones, which, in addition to ordinary calls, are able to perform a lot of different functions. The modern phone is able to instantly access the Internet and find the necessary information there, take and send email letters, make stunning photos and video clips of excellent quality, etc. That is why we most often use the phone no longer as a means of communication, but another multifunctional gadget.
It is for this reason that it always wants the phone constantly at hand, in the maximum availability field. In addition, sometimes on the phone you need to view photos or videos, so I want it to be as convenient for this way.
In order to satisfy all these needs, you need, of course, use mobile phone stand. Today in stores you can find a lot of different in the form of accessories. So, for example, for sure, many people remember the stands under the phone in the form of a female hand. At present, the coasters have become not only more attractive and elegant, but also functional. They are able to charge the phone battery, report call, tilt the phone to view at a varied angle, etc. So everyone, even the most demanding and demanding consumer can always purchase a product to taste.
Stand for mobile phone with your own hands
Nevertheless, if you prefer things made by your own hands, which will be a real exclusive, we will tell you how you can make an attractive one phone stand. To do this, there are a lot of various ways, we will tell about the simplest, and at the same time unusual.
Stand for mobile phone with your own hands - 1
The first option is perfect for your phone with a wide display and a sufficiently long case, such as, for example, an iPhone or any phone from the Samsung line. The stand is incredibly convenient to use and is really functional. For its manufacture you will need only 2 minutes of your time.
- You need a binder (a kind of clamp, which is used to fasten the papers with each other), as well as the suction cup that is used for fastening, for example, towel holders. So, hit the binder to the suction cup in the place where the hook is located. Voila! A simple and convenient stand is ready.
- Attach the suction cup to the back of the phone (do not be afraid, it does not hurt him and does not leave the phone when the phone does not leave) and place the phone as you are comfortable, vertically or horizontally, in any case the viewing angle will be perfect.
Stand for mobile phone with your own hands - 2
The second option is suitable for truly creative natures. In order to do it, you need to master the art of origami.
- For the manufacture of such a stand you need to make 24 white ticks and 23 pink. Ticks are manufactured in the same way as the cranes.
- Then white ticks are fastened in a circle so that a kind of circle is formed as a result. Between each pair insert over one pink tick. Thus, you get a tavering cone.
- Continue the design to the height you need. Place the mobile phone in the center, and feel free to admire the creation of your hands!
In the world of modern technologies, it is difficult to submit a person who has no mobile phone. With the entry of gadgets to our lives, accessories that are huge many on store shelves and on the Internet appeared. Often the usual holder, the case and other things for giving the mobile device and style is far from cheap. Therefore, the stand under the phone, with your own hands, is a great solution for everyone.
Do not make the accessory at all. To implement the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what the most like best. So it should be included fantasy and put into the course of all ideas.
What can be done under mobile?
Creating something independently gives ample opportunities for creativity. Stand for the phone, with your own hands, can be made of the following materials:
- paper;
- tree;
- plastic;
- plaster;
- any natural materials.
In general, it is possible to put into the move all the materials that were at hand. The more intricate accessories, the more interesting the stand for a mobile phone will turn out. You can make the most incredible accessories, which even on the shelves there are no stores. Therefore, it is worth noting this option.
Stand for your phone with your hands
It would seem that you can do from ordinary leaves? In fact, an excellent stand for the phone may turn out of this material. It is not difficult to create it at all. To get started, you need to prepare the following items:
- colorful paper or white, which will then be decorated;
- multicolored gouache, watercolor or acrylic paint;
- glue;
- a ruler for measurement;
- simple pencil;
- scissors;
- various decorative decorations that will be appropriate is also worth keeping at hand.
Properly organized space will help make it so that the stand for the phone will be framed in a matter of minutes. Therefore, at the one who embodied her, the excellent opportunity to become the owner of a beautiful and convenient accessory for mobile.
Sequencing:
- First you need to come up with what form will stand the stand.
- After you need to draw the templates of the desired dimensions on the sheet.
- Elements for the product are cut on them.
- Then carefully according to the scheme that was previously drawn or printed from some site, glue the necessary parts.
- After that, you should wait until all the elements are enshrined.
- The next step is the connection of individual parts among themselves.
- Let all fastening elements be dried. After that, you can proceed to decorating the product. At this stage, various brinets, butt, beads and other small beautiful elements can be put into the move.
- After decorating can be considered a ready-made stand for the phone. We created a masterpiece with your own hands. With the advent of such a device, there will never be a problem with the search for mobile, because it will always be in my place.
Stand for the phone from the tree do it yourself
There is a lot of options using which you can implement any idea. Why is the wooden holder better? The stand for the phone from such a material creates competition with paper products. The tree is stronger, stable and more durable. True, to make a wooden stand, one sketches and ideas will not cost. In this case, you also need:
- special equipment;
- skills;
- ability to work with a tree.
Before making a stand under the phone with your own hands, you should analyze your actions. If you didn't have to work with the tree earlier, it is better to bet on a paper holder for the phone. And if there is experience, you need to cook:
- the tree from which the design will be constructed;
- tools for working with wood;
- product circuit;
- feltaster, which can be drawing on a tree;
- line;
- glue;
- accessories (buttons, beads, rivets);
- simple pencil.
After all the necessary elements were at hand, it is possible to proceed to the immediate implementation of the intended. The following sequence is as follows:
- First you need to find a suitable scheme for the product.
- Then it is required on a wooden basis to put marks for which the connector will be penetrated.
- The next step is to cut the shape of the existing tool.
- Then it is necessary to conduct control measurements and find out whether the mobile phone is placed in the cut connector.
- After that, it is necessary to glue harvested spare parts.
- The next step is to give smoothness. This can be made with a file or a special network running.
- When the surface is smooth, you can decorate the finished shape with some color.
- After dyeing, you need to wait to dry out the product.
- The work is completed with gluing accessories selected for this mission.
- At the end, a fully finished design should be lacquered, which will give shine and aesthetics.
In general, make a stand for a phone from a tree will not make problems. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in that stand, which is created by its own hands.
Beautiful layout of the stand under the phone
In no case should not forget about the decor. After all, it is the decoration that even the most unprofessional and amateur product will give him a flavor, character and mood. Therefore, it is worth seeing what interesting accessories are at home. It can be:
- shells;
- buttons;
- rhinestones;
- beads;
- foil;
- color Scotch.
In general, everything that is at hand and has an unusual look, can come in handy in the process of making a stand for the phone.
Not only the necessary accessory, but also a great gift
I finish, you can not only use this product for yourself, but also to give. Therefore, it is worth making some spare supports: suddenly someone suddenly calls to visit, and there will be nothing to give! And the stand under the mobile phone is always useful, even if a person already has one, the second will never hurt.
