Short. The purpose of ND filters is to reduce the amount of light entering the...
![Neutral density (ND) filters Which density nd filters are better](https://i0.wp.com/habrastorage.org/webt/th/my/jp/thmyjpdxo9ajcldrdjv8geepkjq.jpeg)
The fact is that without a growth mirror it will be very difficult. After all, it is necessary to evaluate your own image before you go out into the street. And this applies not only to women, but also to men. At the same time, a growth mirror will require a significant amount of space ...
This is not true! There are ways that will provide the ability to position the mirror without compromising the practicality of using the surrounding space. How to stick a mirror on the front door, below.
Several options will be involved in the selection:
Both silicone glue and liquid nails are far from the best option for gluing such large mirror. The reasons are as follows - even during application, the first "sausages" of glue will already dry out.
And this means that the above two types of glue will not be able to provide high-quality fixation of the mirror. In addition, in the event of a break, many fragments will fall to the floor, which is also not good.
Of course, you can try to use double-sided tape, but for the price this option will be the most expensive. In addition, an additional metal frame will have to be made for the mirror. Meanwhile, liquid nails or silicone glue (especially) can damage the silver amalgam. In this case, the mirror, despite the fact that it will be absolutely intact, will deteriorate.
Indeed, based on experience, we can say that epoxy glue is perfect option, which will ensure that all technical requirements. For example, applying epoxy is very easy.
It will not be difficult to breed it even for a schoolboy. Main disadvantage- when dried in the room, a persistent chemical smell is established. In fact, this can be easily experienced.
But now, even if the mirror breaks, absolutely all of its parts will remain in place. That is, the mirror will be covered large quantity cracks, but it will not fall out.
In addition to all of the above, epoxy glue will also cost significantly less than all the other adhesives mentioned above.
Alexey Zemskov will prove why the location of the growth mirror on front door is the ideal option:
You can quickly stick a bathroom mirror on a cabinet or other flat vertical surface if you use the advice "".
To properly glue the mirror, you will need:
1. We stick strips of double-sided tape on the back of the mirror or on the cabinet.
2. Squeeze a slide of mirror glue into the center of the cabinet.
The mirror can be smeared along the contour with silicone sealant.
3. Peel off the film of double-sided tape.
4. We apply a mirror to a vertical surface and press it tightly. We try to do it smoothly - then you can’t fix it. If the mirror is large and heavy, place a support under it until the adhesive sets.
High quality double sided tape
Mirrors are often used in apartments and how decorative element interior, and as a functional item. Of course, such a detail may already be part of some piece of furniture, such as a closet. But if you buy it separately, you will have to think about the installation method. If we are talking about fixing them on any surface, then it immediately becomes topical issue: is there any glue for mirrors? If yes, which one is the best? About this in the article and will be discussed.
By gluing a mirror product to the closet, you can refresh a fairly boring interior, give it originality. Often the question arises: how to attach the mirror surface to the cabinet door.
First of all, make a markup and carefully mark with a marker the place on the door where you are going to place this piece of decor. Double-sided tape is often used. The algorithm of actions in this case is as follows:
This is another important question for those wishing to create new interior. The sequence of actions is as follows:
Important! To completely eliminate the risk of the mirror falling off the wall, make a temporary horizontal support at the bottom of the product. Leave it until the adhesive is completely dry. As a rule, polymerization will take from 20 to 30 minutes, but the composition will completely harden only after a day.
Is it possible to stick a mirror on “liquid nails”? Practice shows that this fixative successfully replaces adhesive tape:
Before starting the installation work, carefully study the instructions for the “liquid nails”. Glue can be applied in two ways - with a spatula or a glue gun.
Important! After the package of "liquid nails" is opened, the composition can be used for another 12 months. It completely retains the properties.
You can work with glue only in a well-ventilated room, since the composition contains toxic substances. Optimum temperature storage varies between 5-25 degrees.
Sometimes it becomes necessary to glue two mirror surfaces together. Will such a structure hold up well? If you do everything right, then, of course, it will. Such work cannot be called complex and time-consuming, but certain basic knowledge are still needed. There are two options for gluing mirrors.
This method allows you to significantly increase the surface area with a mirror coating, but it is quite difficult, requires accuracy and scrupulousness. If you plan to mount such a structure on the wall, then it is advisable to mount each of the mirrors separately, and then adjust them mutual arrangement. To glue the edges, special compositions for mirrors are used. Such fastening is not very strong, therefore it is used infrequently.
This method is used when there is an old mirror that has lost its presentable appearance, but for some reason it cannot be removed. A new product can simply be glued to it.
The procedure is almost no different from gluing a mirror product onto a wall without cladding. The only feature is filling the gap between the back surface of the mirror and the wall. The sequence of operations is as follows:
Important! Take care to create a decorative support so that the product does not accidentally fall.
This mirror glue is considered one of the best and most reliable. It contains rubber and organic resins, which provide maximum reliability to the joints.
Important! Glue "Titan" is suitable for attaching mirrors to wood, concrete, drywall, ceramics or metal.
The main properties of the connecting seam:
The tool is extremely easy to use and low cost.
This composition is characterized by good strength and a short polymerization period. It is popular with motorists for mounting rear-view mirrors. Sold in two ampoules - with glue and polymerization activator.
A mirror is a useful and multifunctional thing, because it is needed not only so that all household members can admire their reflection, but also in order to visually push the walls apart, make the rooms larger and brighter.
Mirrors are needed in almost every room, everyone understands this, but not everyone knows exactly how to properly attach a mirror to the wall. Before when chemical industry was not so developed, there was only one way out - the craftsmen drilled the walls and fixed the mirrors on the screws. But today the situation is simpler, because they can simply be glued - to the wall, closet, tile in the bathroom!
Many masters take risks and use double-sided tape for this purpose. However, adhesive tape is not as reliable as special, qualitative composition, so it is wiser to use liquid nails or glue for mirrors.
All professionals unanimously recommend the use of exclusively special compositions on which Mirrors is written, that is, “for mirrors”. Universal take definitely not worth it. High-quality, professional mirror glue has the following properties:
Before proceeding directly to the attachment, the surfaces should be prepared. On the wall, it is necessary to clean out all the existing bumps and bumps, then it is desirable to treat it with a deeply impregnating primer - this will give good adhesion in the future.
The next step is the process of gluing the mirror. For work you will need: thick double-sided tape (15 cm tapes), a special composition. The adhesive tape must be attached to the back of the mirror, in strips, after about 50 cm. It will hold a fairly heavy object until the composition seizes. Then you need to remove the protective part from it. Next, glue points should be applied to the entire surface, it is more convenient to do this with a gun. The composition must be applied along the edges and over the entire surface, after about 10-15 cm, between the strips of adhesive tape. Everything, now the mirror must be quickly attached to the wall and pressed firmly.
At this point, you need to ensure that there is a gap around the entire perimeter of the attached object. It is necessary to press evenly over the entire surface, carefully, but gently. The composition will grab in about half an hour, and completely dry after a day. To be sure of the result one hundred percent, it is desirable to fix the attached object. You can press it down with a heavy object wrapped in cloth, and support it from below with a table or chair.
Mounting composition TITAN 930 is just designed for attaching mirrors to wood, concrete, ceramic tiles, stone, metal, cabinet doors. It has proven itself quite well - it does not spoil the amalgam, it is moisture resistant (suitable for work in the bathroom), it gives an elastic but strong seam. The consumption of TITANIUM is quite moderate - it is about 300-500 grams per 1 square meter.
Composition Ottoseal S16 silicone, neutral, one-component, based on alkoxy. Perfectly sticks any mirror coatings, does not harm them, suitable for plastic, ceramics, glass, steel, wood, concrete. You can also work with plexiglass products. Such a tool is more suitable for working with mirrors with protective coating, it must comply with DIN 1238 5.1 and DIN EN 1036.
Dr.Schenk glue also works well - it does not harm the amalgam of mirrors, it is resistant to water, alcohols, salt. With it, you can attach to any surface, you can work with the composition even in the bathroom.
A mirror is a fragile and quite expensive item, so you need to glue it only with the help of high-quality and proven glue. By following the technology, you can get a guaranteed reliable grip.
March 7, 2018Sticking mirrors on furniture elements is a simple but responsible process. If you make mistakes and do everything wrong, then over time the mirror will begin to move from its place or even fall and break. In the review, we will figure out how to reliably and efficiently carry out work, you will learn several ways and you can choose the one that best suits your situation.
First of all, let's figure out what methods can be used to fix mirrors. All of them have proven their reliability, but the technology of work is different and is used for certain situations.
The simplest solution that has the following advantages:
It is best to choose a double-sided tape with a thickness of 0.8 to 2 mm, it will smooth out small irregularities and provide high strength adhesion to the surface. Of the manufacturers, 3M products have proven themselves best, it is this option that professionals recommend.
Among the shortcomings, the following can be distinguished:
The most popular option that allows you to stick mirrors to any surface:
Since we understand how to stick mirrors on furniture, we will analyze this option in more detail. Let's start with the pros:
Of the minuses, it is worth noting the following:
In this case, special fasteners are used, which are designed to install mirrors on furniture. There are several main options:
The advantages of this solution are:
There are also disadvantages:
We will look at how to glue the element on silicone, as this is the easiest and at the same time reliable option. This method is suitable for any designs, the main thing is to carry out the work correctly and use high-quality materials.
First of all, collect everything you need:
If you find liquid nails that are marked "for mirrors", then you can use them.
The mirror is fixed using the following devices:
Let's figure out how to attach a mirror with your own hands:
Illustration | Description |
![]() |
being prepared workplace . It is best to make a flooring on which a door or other piece of furniture is laid on which a mirror will be glued, it can be placed next to it if there is enough space. |
![]() |
Preparing the cabinet door, the following steps are performed:
|
![]() |
Preparing a mirror. To do this, the element is turned face down and carefully wiped with the same cloth soaked in solvent.
|
![]() |
Apply silicone compound. To do this, the tube is inserted into the gun, a hole is cut, after which work can begin. The composition is distributed in zigzags with a step of about 100 mm, the indent from the edges should not be more than 30 mm. |
![]() |
It is necessary to accurately install the mirror according to the markup. To do this, a long vertical edge is placed along the line and aligned. If the length of the mirror is large, then it is better to involve an assistant in the work. |
![]() |
The mirror gently lowers and presses against the surface. It is important to do the work accurately so that the edge does not move and the element does not warp. |
![]() |
Checking the position of an element, if there are small displacements, then it will not be difficult to move the mirror a little, this is done in the first few minutes, until the silicone has seized. |
![]() |
Weight is put on. It is left for a day, during which time the silicone seizes and the parts have time to stick very securely to each other. |
Now you know three ways to attach mirrors to furniture and you can do the work yourself. The video in the article will tell you more information on the topic, but if you have questions, write them in the comments.
March 7, 2018If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!