What to do if the lock does not fasten. If all else fails and the lock diverges, what should I do?(Edit)

But where do all these epithets go and what “pearls” fly from our lips when suddenly, at the most inopportune moment and in the most inconvenient place, lightning broke.
Of course, there are different situations.
Sometimes the zipper just crumbles into pieces from long use, and sometimes a completely new clasp is torn like a rag. Then there can be no talk of any repair. But more often than not, a zipper can be repaired quickly.

So, let's consider the most typical cases.

Lightning starts to spread
If this happens, then there is no need to rush to change it. First, you should try to lightly tap on it from the inside and outside with a hammer, and you will have to walk along the entire length three times. Then you will need to reduce the gaps between the top and bottom of the slider, for which you will need to carefully squeeze it with ordinary pliers. But such resuscitation can be carried out only once, the castle will no longer withstand and will fall apart completely. Therefore, if you managed to save your lightning once, then try to prepare a spare slider just in case of a fire.

If the lightning diverges, we will try to fix it at home. Further step by step photo instruction:















If lightning diverges periodically
If the lightning diverges periodically, and this is not the first time, then you will have to change the slider ("dog"). To remove the old slider, you need to remove the limiter (small plate) located at the bottom or top of the zipper.

Fallen teeth
When several teeth fell out of the nylon zipper, they can also be restored with a bandage: the damaged area is stitched with a fishing line turn by turn.

If the lightning came off the base
A zipper torn from the base (fabric) can be sewn on with a machine needle. This method is especially convenient for repair work in the most inaccessible areas, for example, in boots, since the puncture is carried out only in one direction.

If you need to repair a metal zipper
If not a nylon, but a metal lightning is moving around, then it must also be carefully forged on both sides, but with heavier blows of the hammer, and then reduce the gap between the lower and upper halves of the lock.

If the plastic zipper is broken
A plastic zipper that starts to diverge on shoes can be restored. Its performance will be restored if you unfasten the lock and moisten its teeth with an alcohol solution of rosin (flux used for soldering). Then you need to let the lightning dry for several hours. So the fastener will work more reliably, but over time this operation will have to be repeated.

What to do with a clasp that diverges
When the situation got worse, for example, one clove popped out of the fastener, then the repair would be more difficult, but also quite feasible for everyone. In the place of the torn off clove with a needle with a thick eye, you need to make a few stitches with a fishing line. This operation will save us from having to install a new clasp (at least until a certain time). After all, there is no better solution than buying a new one.

In order to avoid problems with "lightning", it should be periodically prevented. Lightning is thoroughly cleaned with an unnecessary old toothbrush, the cloves are superficially inspected, they are treated several times with a candle (wax or paraffin). You need to develop a habit in yourself to restrain the use of force, not to pull the lock if suddenly something does not work right away. You just need to let go of the lightning, grab it with your hand again and slowly pull, after which it will certainly work, as it should.
For prevention, you can sometimes wipe the zipper with a pencil lead.

If the zipper does not open on winter shoes, then you need to fix its tongue with a small hook. You can take it from an old dress or skirt and bend it a little, and then sew it away from the castle canvas.
If all the time the zipper diverges on a skirt or trousers, and you cannot change it, then you can make a loop of thread that is tied to the zipper tab. After that, by fastening the lock, you can put a loop on the button, which will not allow the zipper to diverge.

Also, do not be upset if suddenly lost zipper pull. Temporarily, until you have the opportunity to go to the workshop or change the fastener yourself, you can try replacing the tongue with an ordinary paper clip.
If a paperclip confuses you and you are looking for other ways, you can try this: attach a small ring from fishing tackle to the lock, a small ring taken from a keychain, or a piece of strong cord. Any of these items should be threaded into the ear of the lock and you can use your favorite part further.

If the slider is broken completely, then in the sewing department of the store you can buy a slider right size. But picking up a new lock with the number that was indicated on the broken slider is almost impossible. Therefore, you will need to straighten the limiter, insert the slider, rub the teeth with paraffin and use the zipper like a new one.
There is a way if the base of the castle is damaged. This, it turns out, is one of the simplest and most easily repaired breakdowns. Just apply any colorless glue to the damaged area and leave to dry. Then you need to check the quality of work and, if necessary, repeat the procedure again.
All these methods are simple and convenient. Each of us can master them. But this science will help to adequately get out of an unsightly situation in which any person may find himself. Just do not be afraid, and then you will become your own master. True, up to a certain point. After all, how many patches are not necks, but from the wear and tear of things, including the same zipper, you can’t get anywhere.

If the runner jumped off. Step 1. Cut the zipper close to the base:


Step 2. Put on the slider and pull it up a little so that the zipper closes:


Step 3. Sew the incision with strong threads:


The lightning is working again:

It happens that the halves of the zipper are fastened one above the other:


Remove the restrictor. Gently lift the zipper half with your fingers to the desired level:

Now you can return the limiter to its place or sew the halves of the zipper:

Oh, how the zipper on a jacket or bag usually jams at the wrong time. You are late for work or rush to a meeting, and she is neither here nor there, even if you crack. In this article, we will tell you how to quickly deal with this trouble and, most importantly, how to prevent it.

History reference

The zipper was first patented in 1893!

With active use, the zipper naturally wears out. She begins to fasten tightly, and sometimes jam. But it is in your power to prevent that wonderful moment when you find yourself in the thrall of your own jacket or when you cannot get the keys out of your bag.

Prevention

If the zipper is not iron, then be careful when ironing so as not to damage the teeth.

When storing, make sure that the zipper is not bent. Stack carefully.

When fastening the zipper, do not pinch the slider with your fingers so as not to accidentally damage it.

Never pull the lock with all your might, no matter how late you are.

When you fasten the zipper, make sure that there are no stretched places. It should fasten freely and easily.

Broken "tongue"

Broken "tongue" or completely lost? This is easily and creatively solved with the help of a keychain ring or a paper clip. Attach it to the slider and, voila, the zipper is ready to use again.

The slider flew off the lightning

It happens that the slider starts to fly with lightning. To solve this problem, thicken the zipper stops by making a few turns of thread in their place. Threads take the same color as the lightning.

The zipper is tight

To ensure that the zipper always closes like clockwork, try never to pull it with all your strength, no matter how late you are. But if, nevertheless, it began to fasten tightly, then this problem is solved easily and creatively - just rub the zipper teeth with a bar of soap, an ordinary wax candle or rosin. Thanks to these actions, the dog with a zipper will walk much easier.

Lightning jammed

Most often, metal zippers get stuck due to the peculiarities of their structure. But do not rush to put an end to them and mentally prepare to carry the item to the workshop. Perhaps a lining or some kind of thread just got next to the clasp. Carefully remove it or gently pull out the pad by locking the slider or sliding it up and down.

If it's not the lining, then, most likely, some of the teeth on the metal zipper are out of "general order". To put them back in place, lightly tap the problem teeth with a hammer. Lightly is the key word. Don't hit the zipper with all your might.

Lightning diverges

Another trouble that often happens with lightning is that it begins to diverge.

This is usually due to the fact that the zipper slider is unclenched. This problem is easily solved with the help of pliers. Just lightly pinch the slider at each end and that's it - the zipper will begin to fasten. It is necessary to clamp strictly along the edges, and not in the middle. And it is absolutely impossible to do this too much, since the slider will not be able to move at all after your efforts.

That's all we have for today. As you can see, all problems with lightning are not such problems. But, of course, it is better not to allow them to occur.We hope you succeed!

Lightning has long and firmly become an indispensable part of everyday clothing. Any sizes, shapes and colors, metal, plastic - in general, for every taste. Zippers are used on clothes of all seasons - and knitted summer shorts and a woolen winter coat - all can have such a convenient closure. But it’s very disappointing when it breaks down, moreover, it can ruin not only the mood, but also specifically disrupt the plans, since the zipper on the jacket that has not been zipped will not let us go out!

If the button that has come off can be quickly sewn on or, in extreme cases, left unfastened, then this technique will not work with a zipper. How to fix it? Ideally, of course, take it to the studio. They will sew in a new zipper or replace the slider without any problems. But if a thing needs to be put on now, then you need to be smart and use one of several simple ways.

How to lubricate a nylon zipper that has failed? For this, the usual paraffin candle, which needs to be carefully, without pressure, drawn along the entire fastener, which will give the slider a better glide. Or, for the same purpose, use a soft slate pencil or hard soap.

If the zipper diverges after fastening, this may mean that the slider has loosened. It can be easily put into operation by pressing lightly with pliers on both sides (no need to press in the middle!). The main thing in this technique is not to squeeze, otherwise the slider will not be able to move at all or even break. If everything is done, right, the clasp will be easily fastened. Perhaps the first few fastenings will be a little difficult, but it's not terrible, it will develop over time.

If, after all the described manipulations, the lightning still diverges, then the slider will have to be replaced. To do this, using a thick needle, disconnect the stops at the beginning of the fastener, remove the slider, install a new one that is suitable in size (it is indicated on the back of the slider) and put the stops in place.

In the case when the cloves fell out on the nylon zipper, they need to be repaired using a fishing line. Only the ends of this fishing line must be carefully fixed, otherwise they may interfere with the movement of the slider. You can repair the teeth on a metal fastener using the same teeth, only removed from another zipper.

If the clove of the metal fastener is out of the row, it needs to be tapped a little with a hammer, it is also advisable to walk with a hammer along the entire length of the lock.

For a very long time, these convenient fasteners appeared on our clothes, and now we cannot imagine life without them. Compact, comfortable, aesthetic - and that's not all positive characteristics these castles.

But they also have a drawback. These locks sometimes fail at the most inopportune times. How to fix a lightning if it diverges? This will be discussed in the article.

Of course, situations are different. Sometimes you have to give a thing for repair, but basically you can fix the zipper yourself, special skills are not required for this.

Clamping the slider with a zipper

Has the zipper on your bag come loose? How to fix this accessory yourself? Usually the zipper diverges precisely because of the slider - it unclenches and the edges of the zipper do not fasten. It is important to remember here that you can clamp the slider only 1-2 times, then it will simply break. If this happens, it is better to prepare a new slider in advance.

How to fix a zipper if it diverges:

• First you need to try to clamp the slider. This will help ordinary pliers. At the same time, it is important to do everything right: in turn, clamp the slider from each edge, without applying much effort. In this case, do not squeeze the "dog" with your fingers, only tools will help here.

• It is not necessary to press hard on the slider - this can cause it to crumble.
• There is another method. Push the edges of the thing and lay it with a slider on a table or stool. At the same time, the lock must be fastened (even if it diverges). Fasten it about halfway, clamp it with pliers and lightly tap it with a hammer. Then try to fasten the zipper again. If there is no effect, then the procedure should be repeated.

Repairing a zipper with no teeth

How to fix a zipper if it diverges due to lack of teeth? At home, this is quite difficult to do, but possible. If the zipper consists of metal teeth, then you can remove them from another lock. In this case, it is important to choose the teeth in size. It is difficult to insert them into place, so if you couldn’t do it yourself, you will have to take the thing for repair.

Nylon and plastic zippers much easier to fix. To do this, you only need a thick fishing line. But you need to fix this fishing line so that the ends do not impede the movement of the slider through the zipper.

There are times when teeth on metal zippers fail. At the same time, the zipper is fastened with difficulty, sometimes because of this, the zipper on the jacket diverges. How to fix? This issue is solved quite easily: you need to tap with a hammer on the zipper itself where the teeth are out of the general row.

Problems when opening and closing a zipper

Sometimes the slider starts to “walk” poorly around the castle, while it can be difficult to unfasten and fasten the zipper on things. This problem can be solved in several ways:

1. The folk method suggests that you can smear the zipper with a piece of lard. This is suitable for things made of leather or dense coarse fabric. Otherwise, greasy marks may remain on things.
2. A safer method is to lubricate the zipper with regular wax. A wax candle is suitable for this - with its help, the "dog" will move easier.
3. But the ideal lubricant for a zipper is a pencil lead. Just be sure to choose a soft pencil. It is necessary to draw a lead over the zipper several times, and then unfasten and fasten the lock several times.

Zipper Care

In order to avoid damage to the lightning, it is important to properly care for it. Some nuances should be taken into account:

1. The main enemy of lightning is sand. When sand hits the lightning, it inevitably diverges. Therefore, it is important to keep your shoes clean, use a special cream and sometimes clean the lock with a regular cotton swab or an old toothbrush. This advice is relevant specifically for shoes, so that the zipper on the boot does not disperse. How to fix a zipper, we discussed above. Here I would like to note that if the lock on winter shoes does not want to unfasten in any way, then fixing its tongue with a small hook (for example, from an old dress) will help.

2. In order for the lightning not to disperse, you need to wash things correctly. Before washing, the zipper should be fastened, and the product should be turned inside out.

The article answers the question "How to fix lightning if it diverges?". As a result, we can say that if there are problems with this type of lock, do not rush to give the thing for repair. You can always try to revive it yourself.

Probably, everyone at least once got into a situation when the zipper on a jacket or boot broke at the wrong time, and it is not known how to fix it if it diverges. Of course, you can give the thing for repair and pick it up in a couple of days, but this is not at all relevant if these are the only boots, and you have to leave after 10 minutes.

How to fix a zipper lock?

If we are dealing with a dispersed lock, then most likely the reason for its divergence is in an unbent dog. It can deteriorate if the lock is fastened too tightly, is constantly in a taut state, or the thing has been used for more than one year. First, the castle will need to be leveled, that is, put the slider at the very beginning, and only after proceeding with its resuscitation.

In order to remedy the situation, we need pliers. With their help, you need to press the dog on both sides, while applying a little effort. If the slider is squeezed too hard, it will stop moving altogether, and in the worst case, it will burst.

But if the slider still does not align the teeth in a certain place, then the reason may be in them. Having carefully looked at the place where the lightning begins to diverge, you can find that the nylon teeth have straightened out, and the metal ones can stand crooked. You can try to fix this situation.

You can try to carefully hem the plastic cloves with a thick fishing line and such a zipper will still last for some time. And if the lock is metal, then it is even easier to deal with its breakdown - just take the tweezers-clip and put the “tooth” in place with a simple twist. It diverges, lightning can also be due to the tight running of the slider. To make it easier and smoother, the lock in the closed state is rubbed on both sides with a paraffin candle and unfastened several times and fasten the zipper. Excess paraffin is brushed off.

The zipper is unfastened - how to fix it?

It is not always possible to "agree" with lightning. She is especially problematic on and constantly strives to unbutton. In this case, you can resort to a little trick. To do this, you need a small ring, which is slightly larger than the diameter of a button on jeans - this can be found on a keychain.

The ring is inserted into the loop of the slider and when the zipper is fastened to the very top, they are thrown over the button. Thus, this design remains invisible to the eyes of others and protects you from trouble in the form of an unbuttoned fly.