How to make and decorate a bed headboard: options, master classes, decor ideas. Headboards for beds (87 photos): ideas and spectacular options How to cover the headboard of a bed with your own hands

The buildings 24.08.2023

The buildings

The bed is the main subject of the bedroom. You can not only sleep on it, but also just relax or watch TV. The design of the bed and the room as a whole is determined by one of its main elements - its headboard.

This short review will describe its main types and materials used for manufacturing, as well as instructions on how to make a headboard with your own hands at home.

Types of headboards

There are various materials for their manufacture. A classic bed headboard is made of wood. In order for the furniture to fit perfectly into the room, it is necessary to choose a method of processing and decorating the wood. If the wooden surface is not decorated, then it is covered with paint or varnish.

The decor can be made using various types of leather, textiles or using exotic materials in the form of mosaics or natural stone.

In this case, the tree serves only as a basis for the product and does not perform an artistic function. Therefore, in this case, instead of wood, other similar materials, for example, plywood or chipboard, can be used.

The headboard can be made of metal, that is, forged. Such metal products are used in various artistic styles.

Materials and tools used in finishing headboards

It is quite difficult to make a high-quality upholstered headboard, but it is quite doable if you plan all the operations in advance, select materials and tools.

Before starting work, you will need to select the design project that you plan to do. Nowadays it’s easy to find and select various photos of the headboard that you can make with your own hands according to the design that matches the interior of the room.

To make the back, you will need a sheet of plywood about 1 centimeter thick as a rigid base. To add softness, you will need a sheet of foam rubber of the appropriate size and a thickness of at least 5 centimeters.

To finish the headboard area you will need a piece of fabric or leather. In addition, decorative elements will be required for decoration.

For work you will need the following tools: drill, hacksaw or electric jigsaw, furniture stapler with staples, knife and scissors and glue. To attach the artistic elements you will need a sewing kit and twine. A screwdriver and a hammer will not be superfluous.

First of all, the frame of the headboard is prepared. If an existing frame is used, then it is freed from the existing decor. The most difficult stage of the work is decorating the headboard with buttons or other similar artistic elements.

If they are planned to be used, then boards about 1 centimeter thick are attached to the back side around the perimeter to create volume to hide the internal fastening elements on the back surface.

The necessary holes for the elements are marked and drilled on the area. The location of the holes can be drawn manually; their location is determined by the required pattern. It can be horizontal or diagonal, made using the same or different elements.

Fastening of foam rubber and fabric is carried out using a construction stapler. First, the foam rubber is attached. Instead of thick upholstery foam, you can use several layers of thinner material.

The sides are covered with foam rubber with the material folded onto the side surface for additional softness; the bottom and top can be covered flush with the edge without bending the foam rubber onto the side surface. If you plan to bend the foam rubber onto the lower side surface, then you need to check whether the design of the bed allows this to be done.

Fabric or leather is cut with a margin of 25 to 30 centimeters on each side. The head of the bed is placed vertically, leaning against the wall and covered with a piece of fabric. When attaching buttons and material, access to both sides of the headboard is required.

For decoration, special buttons can be used, which can be covered with upholstered or other material. The button is wrapped in fabric, its edges at the back cover are smeared with glue, then using a special plastic mold, the cover is carefully hammered in. After the glue has dried, the button can be used.

Sheathing the structure is the most labor-intensive and critical stage. Decorative buttons are attached in a certain strict sequence. An ordinary button is rigidly tied or sewn to the two ends of an upholstery thread threaded through a thick needle.

The thread is threaded from the back into the hole in the frame and brought out. A decorative button is put on the outside of this thread, wrapped once with this thread and sunk a little into the foam rubber - this thread is brought out through the same hole back, to the back side through a regular button.

The double thread is cut and its ends are tied several times like shoelaces. In this case, you need to ensure that the decorative button is sunk into the foam rubber. Decorative buttons are worn in rows from top to bottom.

After all the buttons are attached, the fabric or leather is attached around the perimeter. To do this, the headboard is placed face down on the clean floor. The fabric is secured with slight tension using staples. Small, neat bends are made from the corners. Excess pieces of fabric are cut off, and then the back of the headboard is carefully covered with a piece of material.

After studying this review, you can understand how to make either a new headboard, or how to remake the headboard of the bed with your own hands, using new materials to update the interior. Since independent work does not require large expenses, such updates can be carried out regularly on your own. Each time the quality of work will increase.

By improving your skills, you can help update the interior of your close relatives or friends. In any case, a self-made interior solution will bring a lot of pleasure.

DIY photo of headboard

Beautiful beds with a chic headboard give the bedroom a special charm. Such a detail will not only decorate the interior, but also harmonize the space.

Materials

In order to make a headboard, you will need the following materials:

wall hooks;
long pillow;
a piece of wooden cornice;
threads with a needle.

First of all, a wooden cornice is attached to the wall at a height convenient for the owner. One point is important here: the length of the slats should be slightly less than the width of the bed. Pictures or photographs in frames are placed on top of the cornice, and five hooks are attached under it. Next, loops are sewn to the long pillow and hung on hooks. You can buy a pillow in a store or sew it yourself.

DIY soft headboard

Most often, a soft headboard is used in bedroom interior decor; it will give the room a unique personality. The fabric covering the back will add elegance to the comfort of your home. Moreover, making a soft headboard is not difficult; you will need imagination, patience and a little free time. To do this, you need to prepare the following materials:

textile;
centimeter;
breadboard knife;
foam roller;
scissors;
needle;
Velcro tape;
sewing machine;
iron.

When all the tools and materials are prepared, you can start working. A soft headboard, made with your own hands and installed in the bedroom, will soon delight the eyes of the owners.

Execution Process

Using a breadboard knife, cut the roller in half and take measurements of the resulting workpiece. Next, using a centimeter, scissors and chalk, a pattern of textile parts is made, which are then sewn to the blanks. After this, the Velcro tape is glued to the flat surface of the made cover and stitched on a sewing machine. The foam blank is inserted into the cover and sewn up with large stitches. It is necessary to provide for the possibility of removing the cover for washing. The best way to do this is to sew in a zipper. Velcro tape is glued above the bed to the surface of the wall, after first placing and securing the roller.

Fashionable interior trend

Today, most people prefer beds with high headboards. This trend is justified by the fact that the material completely covers the headboard and gives a pleasant tactile sensation. This way you can decorate absolutely any bedroom, both adults and children, if you want to have a specific design. A bed with a high headboard is very popular, and to keep it looking elegant longer, you need to choose a strong material. It is best to use chipboard rather than plywood. For upholstery, the best option would be leather material or substitutes, since a larger surface will be easier to clean from dust and other contaminants. A bed with a leather headboard will transform the room and become the pride of its owners.

Bedroom design

If the bedroom interior seems too boring, you can liven it up with the help of wall decor and properly selected textiles. To implement the idea, use the free space above the bed. Of course, you can hang a poster or picture on an empty space, but those who are not looking for easy ways decorate the bedroom interior with hand-made elements. Decorative fabrics come to the rescue. So, there are several design options, ranging from the simplest to the luxurious.

Leather headboard

A beautiful, high-quality bed is the dream of many couples. Particular attention is paid to the safety of the headboard. Craftsmen say that only at first glance, making this element at home seems difficult. In fact, everything is much simpler. In order to have a luxurious bed with a leather headboard in your bedroom, you need to know the size and shape of the headboard, as well as choose a beautiful leather upholstery. Next, cut out the base from fiberboard according to a pre-made template. To make the headboard soft and voluminous, use foam rubber. It is also cut out. The size of the foam rubber must match the blank of the fiberboard sheet. After this, cut the leather, leaving 2 centimeters for the fold. If the drawstring is stuffed with buttons, then for this purpose holes are drilled in the sheet blank with a diameter of 5 mm. Buttons on a metal leg should be covered with leather. Dots mark the attachment points where the buttons will be located. Glue is applied to the base of the fiberboard sheet and foam rubber is glued. After adhesion, it and the skin are pierced with a long needle with soutache or rope through the hole and the button is pulled off. The rope is fixed on the wrong side with a stapler. And finally, fold the folds of the skin and secure with a stapler. This is how you make a headboard with your own hands. You can proudly show off your work to friends and neighbors.

Oriental style headboard design

Fans of oriental style can attach a piece of mat to the wall; it will look very harmonious and original. You can highlight the headboard wall with a different color, but you need to think about this in advance - before installing the furniture. What photo wallpaper or headboard painting will be like should also be thought out in advance. If the wall covering allows, then you can update them. Why not? There is another idea on how to decorate the head of the bed - this is wallpaper with ready-made designs, stylized as oriental painting. Well, a very simple and inexpensive way is beautiful stickers. If all the materials are selected in an oriental style, the owners will feel like they are in the country where they want to be. Some people make a variety of mobiles for decorating the head of a bed with their own hands; they look fresh and nice.

How to diversify your bed headboard

The lifesaver of many designers is an old mirror. It looks beautiful and visually expands the space of the room. True, this design option will not suit fans of Feng Shui. A mirror in the shape of a butterfly, doves or heart will look very cute. With their help, you can create a romantic design in your bedroom in a few minutes. Frames and forged screens at the head of the bed are very popular. It turns out quite interesting.

Headboard decor

Attractive decoration of the headboard is created using a ribbon of furniture studs. They are most often used on a soft surface, for example, on a velvet-covered headboard. First of all, the original “line” is pierced with a stapler, creating the intended pattern. Then the finished image is decorated with furniture nails. It is not recommended to use voluminous and convex details and beads in the design, as they can get in the way, cling to hair and fall off.

Making a headboard with your own hands is quite possible. Of course, it will take time and patience to create it, but your work will delight you with its originality and uniqueness.

Comfort in home

For every person, home is the best place where he returns with pleasure. Here he spends time with his family and relaxes. If the bedroom is beautiful and cozy, then the rest will be complete. Therefore, it is very important to arrange a sleeping place with taste, and anyone can do this if they find the time. With patience and effort, your bedroom can be turned into a real paradise. The beautiful design of the headboard contributes to this, and tips for creating it are described in this article.

The headboard is practically the main decorative part of the bed. Its appearance determines the impact on the environment and style of the bedroom. Often there is a desire or need to install a headrest to an existing bed by mounting it on the wall. This headboard is made with your own hands.

Types of backrests

There are many options for headrests. Each type has its own characteristic differences and is more suitable for one or another design style. Let's take a look at the entire line of these products:

Solid wooden headboards are the most common and belong to the classic furniture elements. They can be rectangular, oval or round in shape, have an ornate top line, etc. In addition, such backrests come in different heights, depending on the user’s preferences. The solid surface provides a comfortable feeling when touching your back.
Slatted headboards are also classic models. They are distinguished by their beauty and grace, but they are not very comfortable for the back and head. The pressure is directed to small areas of skin that come into contact with the slats.

Even with basic skills in working with tools, strictly following the instructions and advice of professionals, you can make a headboard yourself at home in a fairly short time and with a positive result.

Let's look at how to make a soft headboard for a bed with your own hands.

Materials and tools

Before purchasing materials, you need to decide on the shape and size of the backrest, and calculate the consumption of wood, fabric and filler. The standard model will require the following materials:

Plywood sheet 16 mm thick, 160 cm wide, 60-70 cm high.
A sheet of foam rubber with a thickness of at least 6 cm, equal in size to the dimensions of the plywood blank.
A large padding polyester fabric, which should exceed the size of the foam rubber by 30 cm on each side.
The upholstery is thick, beautiful fabric. The size should also exceed the dimensions of the back by 25-30 cm.
If you need to decorate the upholstery with a carriage tie, you will need buttons or other consumables suitable for this purpose, including strong thread or twine.

During work you will need:

An electric jigsaw or hacksaw for making cuts and giving the plywood the desired shape.
Screwdriver or electric drill. Set of drills.
Stapler for furniture.
Pencil or marker for marking workpieces.
Measuring tool.
Stationery knife. Scissors.
Crochet hook.
Glue and brush (roller) for applying coating to the surface.

Selecting fabric for headboard upholstery

The backs are covered with various materials, but preference should be given to denser fabrics. They do not stretch or deform from mechanical stress. Bed upholstery with leather or its alternative – eco-leather – is common. The latter is in no way inferior to natural leather in its characteristics, but costs much less.

If your knowledge about the properties of fabrics is superficial and does not allow you to rely on the name, you should pull the fabric in different directions right in the store, carefully examine the density of the threads, feel how thick and durable they are.

The choice of colors is based on the decoration of the room in which the bed will be located and its stylistic orientation. If the headboard is to be the main focus of the bedroom, choose colors that are bright and distinct. To create a unified composition, you should avoid contrasts.

Covering with fabric can occur in different ways. There are several methods that require a number of preparatory work.

If the soft headboard of the bed with your own hands should have the shape of a smooth canvas, the upholstery process is carried out as follows:

A layer of glue is applied to the plywood blank and foam rubber is applied. Sewing with a stapler is unacceptable, because the material is deformed and torn.
A blank made of plywood and foam rubber is covered with padding polyester with the edges folded onto the back side of the product. This layer will prevent the filler from abrading when it comes into contact with the fabric during use.
Place the fabric face down on a table or other flat surface. The workpiece is placed on top of it with the plywood facing up. They are centered relative to each other so that the edges of the material are the same on all sides.
Starting from the center, slightly stretching the fabric, we fasten the fabric along the entire perimeter, making sure that it does not warp or create folds.
In order to hide the staples and edges of the upholstery, a sheet of fiberboard can be attached to the back of the back with short self-tapping screws.

If you plan to cover the headboard using a carriage screed, the process is radically different:

Markings are applied to the plywood blank in several rows at equal distances from each other in a checkerboard pattern.
At the marked points, holes are drilled using a drill and a drill with a diameter of 3-5 mm.
The headboard and foam are connected. Through the holes with a marker, the markings are transferred to the filler and then holes are cut out in it with a stationery knife.
Then follows the process of covering with fabric, similar to the previous one.
Armed with nail scissors, you need to feel all the holes and make similar ones on the fabric.
Pre-prepared buttons with loops made of strong twine threaded through the ears are placed on the front side. They push a hook towards them, grab the thread and pull it to the back side.
Having pulled the button to the base as much as possible, the thread is secured to the plywood with a staple.

The finished headboard is installed in the place intended for it.

If desired, you can update the entire bed, creating a piece of furniture that is integral in appearance and style. The knowledge and skills that were acquired while making the upholstered headboard on your own are applicable in this case. Therefore, questions about how to cover a bed should not arise.

What do you do with old furniture?

When you come home from hard work, you want only one thing: to relax in a cozy atmosphere in your bedroom on your favorite bed. It is one of the most important places for us; you spend a third of your life on it, so it must be comfortable.

The very first thing that catches your eye when you enter the bedroom is the bed. It should be comfortable and beautiful.

But few people think about how to ensure this pleasure. If you are an exception to them, then this recipe for making a luxurious bed is for you. You can imagine an unimaginable variety of ideas for decorating this center of the bedroom, or you can start with the simplest thing - decorating the bed. But how to cover a bed with your own hands?

Of course, you can buy a ready-made bed in a store, but the assortment and price sometimes leave much to be desired. Resorting to the services of manufacturing the desired bed model to order is not very beneficial for our time and wallet. All that remains is to take this, at first glance, difficult and painstaking matter into your own hands.

Tools and materials

Choose fabric for finishing the bed that is non-staining and wrinkle-resistant.

For this process you will need:

foam;
batting;
plywood or hardboard;
construction stapler, scissors;
any fabric for covering;
glue.

The first thing to do is to select the size and shape of the chipboard for covering fabric. It should extend beyond the sheet by 20-40 cm. Thus, there will be a supply of fabric for fastening.

The same must be done with foam rubber. It should be 8-13 cm larger than the bed frame, regardless of whether it is round or square. At the same time, decide in advance which edge of your bed is soft or hard? Depending on this, choose the upholstery option.

Workflow Features

First upholstery method

Build a bed frame and nail plywood onto it.

You need to stuff plywood or hardboard onto a pre-prepared bed frame. At the same time, leave a distance of 5-7 cm at the top in order to secure the foam rubber. The foam rubber is stuffed on top of the plywood, while it is superimposed on the excess part of the plywood that was left in excess. It cannot be nailed without creating a quilted effect, so use a special glue.

When you have finished stuffing the foam rubber, you need to stretch the fabric on top and nail it to the bottom with staples at the bottom of the frame. In the corners you need to gather the fabric into 2 folds, which you place on top of each other and staple them in place at their junction. You can’t stuff staples on top of each other, otherwise it will just be a waste of them. The more you use them, the better the fabric will hold up. Try to nail the staples as far from the edge of the fabric as possible.

Stretch the fabric over the foam and secure it with a stapler,

Here you can also cut out excess fabric, just do not cut off too much, because then arrows and other types of damage may appear on the surface of the fabric. Or the upholstery may simply fall off the frame.

Under no circumstances should the upholstery fabric be stretched too tightly; the seams should not bend. If the pattern or thread strips lie flat and you can't pull a fold in the fabric, you can be sure that you did everything right. Make sure you choose the right fabric.

For different types of upholstery, there are different fabrics to suit your needs. If you plan to place the mattress in a recessed frame, which would be suitable for a round bed, use this upholstery method.

Second upholstery method

Attach the foam rubber to the prepared sheet of plywood using glue or a stapler.

In the same way as in the first case, the frame is covered first with plywood, and then with foam rubber. However, if the sides of your cover will not be even, meaning you will use cords and buttons to create indentations in the material, it is recommended to use batting. This will not create a gap at the top of the bed. Just upholster the frame in the same way; you can add additional fabric at the bottom to hide the fastening points. You can nail plywood to the bottom. Thus the frame is completely upholstered. We put the finished mattress on top and the process is over.

The process of making recesses with buttons in the trim is not particularly complicated. You can draw out the foam rubber in advance, nail it and thread the threads through the fabric, which will subsequently stretch the fabric and buttons will be sewn on top. Or you can drive decorative nails into the places marked on the fabric and simply glue the buttons. They should be the same color as the upholstery, this way you can create a quilted covering.

It is best to choose materials made from natural ingredients.

Upholstery fabric should be selected depending on your preferences. You can upholster beds with velor, velvet, microfiber, jacquard, flock.

If you have allergies, then cover the bed with natural materials, for example, cotton or linen. The latest options can be used for the warm season as replacement upholstery. Cotton does not collect dust, and linen is a durable material. Upholstery colors may also vary depending on the time of year. In summer the upholstery is light, in winter it is dark. At the same time, they should be combined with curtains or decorative pillows or a bedspread.

Before you start covering the bed, carefully inspect the frame for cracks and chips.

Before removing the old covering, be sure to inspect the frame for cracks or damage.
In most cases, it is recommended to change both the padding and the springs. There may be defects in it, or a lot of dust has formed there over time. It is best to additionally secure the new filler with muslin.
Choose fabric with a protective coating. Do not upholster it with nap fabrics or elastic materials. They stretch, and you will be tired of changing the upholstery. Colored designs on fabric are not recommended. When upholstering at home, minor defects will be noticeable.
Make a removable cover or upholstery for the bed.

This way it can be easily cleaned and replaced in the off-season or when worn out.

If you want to make a cover that can later be removed, then you need to measure the frame in advance and create a pattern according to it. Then sew a cover to size from pieces of fabric. It is better to use elastic bands for the sides of the cover.

To make an upholstered bed beautiful for a long time, it is best to make the upholstery in 2 layers.

The first is non-removable, and the second is used as a cover. It is better to make permanent upholstery from high-strength fabric such as cotton, silk, linen, satin, or bamboo fabric. In this case, the outer upholstery must be related to the inner one so that no friction or static occurs between them.

There are many main mistakes to avoid. If the wood of the frame is of poor quality, then cracks may appear on it, which will subsequently lead to tears in the expensive fabric. Therefore, never cover a bed made of poor wood with expensive fabric or leather without a base upholstery. When making removable upholstery, carefully select a fabric that will not stretch. Therefore, it is very important to choose high-quality fabric for covers. If you want to wash the upholstery, then make sure that the fabric is washed well and does not lose its color.

If you want to further decorate your updated frame, make a headboard for it. In the same way, make upholstery, only for pieces of plywood folded in half, and attach it all to the bed or to the wall. And our ideal bed is ready. Thus, you don’t have to buy a new bed, but simply update its upholstery. Once all the work is done, you will look differently at your updated bed.

The bed occupies a central place in the bedroom. You can sleep on it, relax, read, watch TV.

The most important element in the interior design of a bed is its headboard.

Let's talk about what a bed headboard is like and how you can make it yourself at home.

The first option is classic, made of wood. The way the wood is processed determines how the bed will fit into the style of the bedroom. Strictly designed headboards are not decorated; they are made rectangular or slightly rounded. Such furniture elements are varnished or painted.

Aristocratic products are decorated with a wave-like pattern, while elegant ones, made in the Baroque, Empire or Classicism styles, are real masterpieces.

The metal version is an ancient look for the headboard. This option is used in many bedroom interior styles.

This design of the headboard will suit the Romanesque and Scandinavian style.

An option that uses mosaic or natural stone is another popular type of backrest.

It often uses sea pebbles, glass, ceramics and other materials.

Designs in which textiles are used are quite common.

Their wide distribution can be explained by the coziness and comfort that fabric brings to the interior of the bedroom.

Certain types of textiles suit different styles of bedroom design.

For Baroque or Rococo, velvet is used, and satin is suitable for Empire style.

Bedroom furniture, the finishing of which is partially made of leather, looks stylish.

The leather upholstered element gives it chic and sophistication.

The design in the form of shelves allows you to efficiently use the space of the bedroom and free up excess space in it.

You just need to make sure that objects on the shelves do not accidentally fall on sleeping people.

A mirrored headboard is suitable for those who are not committed to Feng Shui.

This teaching does not use a mirror in the bedroom.

Materials and tools

Covering bedroom furniture with material yourself is quite difficult. But if you try hard and don’t rush, you can get a good result. It is better when the design is made by a master. But it’s never too late to learn something new.

Before you get to work, you need to prepare everything you need.

You will need:

A sheet of plywood with a thickness of 8 to 12 millimeters.
Foam rubber sheet from 50 mm and above.
A piece of decorative or technical material. It should cover the area of the head of the bed.
Decor details for decoration.

Materials for making a headboard.

This cannot be done without the following tools and materials:

Electric drills;
Jigsaw;
Drill set;
Furniture stapler;
A set of staples for a furniture stapler;
Construction knife and scissors;
Twine;
Screwdrivers and hammer;
Glue;
Two sets of buttons;
Sewing kit.

Set of tools.

Preparing the back frame

First of all, we free the frame from the old sheathing. From the rear we nail or screw a couple of boards or plywood along the length. If desired, extend the base with 5x5 cm bars. They do not need to be attached to the frame. They will hold the staples that secure the upholstery.

The frame will look ugly from behind. You can cover it with plywood.

Hole marking

We mark the holes that we will drill to attach the material. The template for it will be a perforated Pegboard, in which tools and other attributes are stored.

You can trace the holes that have already been moved on the perforated plate so as not to forget what has already been done.

All work consists of the following stages.

If there is something on the back of the base that interferes with the free entry of the needle, the holes should be made through for durable sheathing.

We fix the foam and fabric

We take the foam rubber, dividing it into two pieces according to size, and place it along the front of the back with the notches towards the bottom. Align the sides and top of the foam. We cut off the excess.

We fasten the foam rubber on the sides and bottom with a stapler.

We drape with textiles. We leave a margin of 25 to 30 cm along the edge. We place the structure draped vertically with the help of fabric and rest it against the wall. It should be noted that when it is sheathed, we will need free access to it.

It's a good idea to find a partner to hold her.

Tightening the buttons

Now we are faced with the most labor-intensive work - covering the buttons with fabric. The set of buttons has instructions for use, read them carefully and get to work. But first, some tips for work.

Be sure to use a good glue if you don't want the button covers to fall off over time.

We cut out the fabric with a margin, a little larger than the template included in the kit. The excess can be cut off after we press the button cover into the mold.
Place the fabric and lid into the mold from the side, then carefully insert it.
Before inserting the button leg, lubricate its edges with a drop of glue. Remove excess solution using a napkin. It must dry at least overnight so that the prepared buttons can be used.

Sheathing the structure

To carry out this procedure, you need to stock up on a long needle with a large eye, simple buttons and twine. You need to tie the knots tightly on the rope. There should be several of them.

The knots on this smooth twine are easy to untie, but it passes freely through foam and fabric.

We insert a long piece of rope into the needle and put the button through all the holes, as if sewing it. We tie it with several knots.

Make sure that you tie the knot well (and more than once) so that it does not come undone over time.

We pass the needle through the top center hole that we drilled and move from the back of the headboard to the front. We hold the needle strictly straight. We pierce the foam rubber with a needle, carefully pressing on it from the outside. Remove the needle that appears.

Be sure to keep the needle straight.

We attach the dried button from the front of the headboard. For this:

We pass the needle through the eye of the covered button;
We turn the thread around the button and thread it through the eye again;
We drown the button in the foam rubber, at the same time, pulling the thread (the loop holds the button in this position);
Cut the twine, leaving small tails;
We tie the ends of the twine at the bottom of the button, similar to shoelaces;
We tie a knot on its reverse side, do this repeatedly.
We cut off the excess rope and hide the ends;
We “pinch” the material, forming it with folds.

Make sure all folds are facing the same direction.

After securing the button, we form a fold that goes up. Then we attach the next one and again form a fold. Having sewn four buttons, we stretch the material and fix the folds with staples.

The folds should look the same.

In a similar way, we attach the subsequent buttons and form new folds of the 1st row. Upon completion, we continue to stitch the remaining surface.

Following all the rules, every diamond on your back will be perfect.

Now small folds are formed and attached after each button to create beautiful diamonds.

You should make microfolds with your fingers after adding each new button to get perfect diamond shapes.

Fastening the fabric

Bed interior and headboard decor

The interior of the bed depends on the preferences of the owner. Usually the bed is bought ready-made or ordered from craftsmen. But now it has become popular to decorate a soft headboard yourself.