Do-it-yourself house for a child on racks. Do-it-yourself children's house for a summer residence: construction stages, materials, dimensional drawings, step-by-step photos and videos

While adults are busy caring for the garden and landscaping the garden, the kids should not be bored: let them be carried away by a fun game nearby. Comprehensively thought-out children's houses for summer cottages made of wood can become the center of attention for children, because their infrastructure meets all the needs of the younger generation. To ensure that a localized playground always causes a stir, it can be designed as an illustration of the interests of the child - in the form of a ship for a young navigator, a palace for a princess, a scientific laboratory for an enthusiastic researcher. In general, if you wish, you can implement any project of a children's house for a summer residence, the main thing is to arm yourself with imagination.

Children's house made of wood, stylized as a ship Source admvol.ru

But you can not start solely from aesthetic considerations: the building must be safe and comfortable. Professional intervention will help in this aspect - experts will tell you what materials will be appropriate, use ergonomic zoning techniques, and make sure that all technical and sanitary standards are observed during construction.

Choice of location and optimal material

To build a children's wooden house, you should find a site that will be equally well visible from the entire territory of the property - then parents will be able to continuously monitor the child. It is not recommended to plant trees, shrubs around the perimeter, break flower beds: due to inevitable watering, soil moisture will increase, which is fraught with fungal and mold damage to wood. Fountains and artificial reservoirs pose the same danger.

If there is already a barbecue area on the site, the game hut cannot be placed nearby: the combination of open fire and gusty wind can lead to fire, and the abundant smoke from the barbecue will not benefit the young body.

All wooden structures need careful impregnation with fire-fighting compounds.

Most often, children's houses are installed on a flat area, away from other outbuildings Source optolov.ru

Why is wood recommended as a basic building material? The secret is in natural origin and minimal risk of provoking allergic reactions. Wood, unlike plastic and metal surfaces, does not heat up, does not release hazardous chemical components into the air (provided that all coatings and impregnations were chosen with great care). Accessories can be made of a similar material, plastic, metal.

The unique texture, pleasant color and natural pattern are the key to the aesthetics of the finished building, it does not need additional decoration, it is enough to indicate the application of several layers of protective varnish in the work plan. If, on the contrary, you want to create a bright composition, the tree can be easily painted in any range.

How to order a wooden house: models from plywood, boards, logs

These are eco-friendly materials, easy to assemble and process, which is why they are taken as the basis for the construction of structures intended for the leisure of kids.

It is easy to make a full-fledged playground near the house Source kinfolks.info

plywood construction

To build a children's house from plywood, craftsmen trace life-size templates of parts on sheets and cut blanks out of them. Usually a moisture resistant material is used. Next, the prepared "semi-finished products" are fixed on a frame made of thick bars using self-tapping screws. All these manipulations are preceded by the assembly of a support belt buried in the soil from a large beam or the laying of a full-fledged foundation.

A plywood house is also another reason to do coloring with a child. Source captivatist.com

On our website you can get acquainted with the most popular projects of wooden houses from construction companies presented at the exhibition of houses "Low-Rise Country".

Simple wooden hut

All parts are pre-impregnated with antiseptic compounds that protect the wood from decay, fungal attack, and mold. The thickness of the boards must exceed 40 mm, of which the parts are cut according to the template. The frame, as in the previous case, is equipped with thick beams, it is sheathed, observing the window and door openings noted in the project.

For the construction of a gable roof, the same brand of boards can be used, it is additionally strengthened with the help of rolled or siding roofing materials, tiles.

In such a "hut" you can play Snow White and three little pigs Source okidoki.ee

Fairytale log cabin

A simple project of a wooden children's house can turn into a fabulous hut. In this case, the complexity of construction is comparable to laying a log house for a full-fledged dwelling: as a result, a small, strong, stable building is formed. The interior is equipped with window openings on three sides, here you can provide full-fledged shutters.

The entrance area can also be with a “zest”: a mini-terrace or a porch without elevation is enclosed under the same roof as the house, patterned railings are assembled, chairs and a compact tabletop are placed. This impromptu summer kitchen can easily be turned into a drawing or board game area.

Just a little imagination and "visiting a fairy tale" is not just a TV show Source finmatrix.ru

On our website you can find contacts of construction companies that offer construction services. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Country house on a tree

Every child will be delighted with such a project, even adults will enthusiastically participate in children's games. A logical link in this category is one sprawling old or several nearby trees, on which a house is “built up” with minimal damage to nature. The playground can be closed, that is, having a full roof (and in some cases walls), or open, equipped with high railings.

The ladder can be screw, attached (if desired, the child will lift it up), stationary, a special training net stretched over the frame looks interesting. In the free space under the floor, you can hang rope simulators and attractions, a bungee and a swing with one crossbar will be relevant. In large-scale projects, two or more sites are connected by a bridge system.

After the construction of such a house, you can visit the child Source urloplandia.pl

House on poles for children with a sandbox

This solution fits perfectly into small summer cottages, since the sandbox is located on the first floor - directly under the bottom of the hut. In addition to the ladder, a miniature climbing wall, wall bars can lead upstairs. A swing and a slide are attached to the house. It is recommended to equip the sandbox with a box for toys and benches.

When developing all models placed at a height, special attention is paid to elements that level the injury factor. Having ordered such a house from professionals, you can be sure of its stability, thoughtfulness and comprehensive safety for the child.

Such a house can easily replace a full-fledged sports ground for a child. Source pinterest.com

Drawing up a plan and determining the future dimensions of a wooden children's house

When developing a project for a children's house for a summer residence, several factors must be taken into account:

foundation significantly extend the life of the building. It will protect the wood from constant contact with wet soil, which will prevent premature destruction of the material;

building type. Huts can be closed or open; in the first case, at least 2 windows and a door should be included in the plan. Open structures look like mini-arbors, the roof is supported by vertical supports, fences are being introduced along the lower edge;

dimensions set depending on the parameters of free space in the local area;

mobility. The design can be transferred from place to place, if you initially adhere to the collapsible design.

To reduce the risk of injury, experts suggest paying attention to a single or gable roof design: sooner or later, direct horizontal variations of the roof become an object of children's interest - they climb on them, try to jump off.

Gable roofs will allow stationary structures to naturally free themselves from snow during wintering.

Such a roof is very beautiful, but few children do not want to climb on it. Source koomelk.com

Concerning openings, specific boundaries are established:

the height of the door should exceed the height of the child by at least 25-30 cm;

windows should be located at a height of at least 50-55 cm from the floor.

The final dimensions of the huts, equipped directly on the foundation, are determined by the operational needs and capabilities of the site. As for houses on trees, pillars, the height of their floor relative to the ground level should exceed 1.2 m, the height of the residential part to the top of the roof should be from 1.6 m. Taking into account slides, stairs, attractions, you need to clear the site at least 4x4 m. This space will be enough for preschool children to play; for older children, all parameters need to be increased by about 1.5 times.

Stages of building a wooden house for children

Based on the drawing of the children's house, the builders calculate the required amount of materials and, after they are delivered to the customer's territory, assembly begins.

Key steps:

Foundation formation brick or deck board. On request, the masonry can be supplemented with a strapping of timber. The specifics of the structure does not imply the pouring of a full-scale concrete base.

Children's house on a columnar foundation Source yandex.ru

Floor create according to the classical scenario: they knock together logs, sheathe them with a floorboard. In some cases, it is acceptable to use plywood in several layers with offset seams.

frame looks like bars dug into the corners of the foundation, which have undergone preliminary antiseptic and water-repellent treatment. In areas where openings will be located in the future, additional supports are installed. Metal corners provide frame stability.

Walls made of plywood, boards.

Gable roof based on gables - triangles of thick timber, fixed on two opposite walls. If a large structure is planned, it will not hurt to install additional gables between the main ones. The structure is stuffed with timber and sheathed with roofing material - boards, straw, shingles, roofing material, etc., depending on the budget of the event.

Finishing in its simplest form, it consists in carefully sanding all surfaces that children will touch, coating the wood with protective compounds.

Careful finishing and painting is the key to the safety of the structure Source valeriaburda.com

The latter are necessary to prevent the processes of decay and damage by insects. Next, the tree is opened with varnish, stain, if necessary, painted. Furniture, which will be placed both inside and outside, is made from the remnants of the material and is also processed.

Building a treehouse begins with finding the right piece of hardwood. Professionals note that the shape of the tree will change in proportion to its natural growth, so they design models located mainly on the lower branches.

The supports and the floor are mounted at the selected location, while the pre-assembly of the walls and roof is carried out on the ground, then the workpieces are lifted and fixed. The safest and simplest staircase is wooden with a railing to spur children's interest, you can also provide a rope for a quick descent.

Video description

And a few more beautiful children's houses clearly in the following video:

Choosing a project together

So that visiting the dacha always delights the child, let him also take part in drawing up the sketch. In this case, the children's wooden house will become a favorite playground and a starting point for developing the creative abilities of the younger generation. Further, the joint family developments are transferred to professionals who will calculate the project taking into account the aesthetic and operational needs of the customer, draw up an estimate, bring the material and begin construction.

If the child has nowhere to play and he is bored in the country, a children's house made of wood can solve the problem. Children are much less demanding than adults. Even the simplest house - no more than a hut made of wooden slats covered with fabric - can become the most beautiful place for them to play. What can we say about more complex structures - located on a tree, similar to wonderful forest huts, with a built-in slide, or even imitating a pirate frigate. About everything in more detail later in the article.

Why a tree: pros and cons

Of course, in order to make a house for a child, you can use a variety of materials - from plastic to real brick. But the tree has a number of specific advantages, some of which are devoid of other materials. It:

In addition, the tree, purely in meaning, is best suited for the implementation of some ideas. For example, it would be strange to make a fairy-tale hut out of plastic, but it would not be possible to assemble an alien ship out of brick at all. Also, if you have a dacha and connections with neighbors, you can find a tree at a low price.

There are also cons:

• The need for care. Every year the house will have to be painted or varnished again so that nothing happens to it.
• The need for careful handling. So that the child does not have a chance to splinter his hand, you need to carefully check all the boards, sand them if necessary.

A tree that is not cared for quickly begins to rot or dry out. But if you are ready to process it every spring, it will serve for a long time.

To further increase this period, you can make a house from one of the most common breeds in construction:

• Pine. Among softwoods, the best one you can choose from. It has a delicate golden color, a slight resinous smell. The first years it will not need processing, because due to the high resin content in the wood it does not rot. May have a positive effect on the condition of the respiratory organs of the child.
• Oak or beech. Wood of a dark, noble shade, which, due to tannins, does not absorb moisture well and, therefore, resists well to the external environment. Flexible, workable - it can be given any shape if it is properly bent during shrinkage.

You can still use an apple tree, but first you need to make sure that its wood is completely dry - during drying, it cracks, changes shape. It does not make sense to process it until it is completely dry.

You should not buy wood for the house that does not meet the standards - this is unsafe, and will also greatly affect its appearance.

You do not need to take boards that have:

• cracks- this means that they are overdried, they will quickly crack further;
• green spots- this is mold or rot, which means that the boards will quickly fail;
• protruding knots- it's ugly, and the child can catch on during the game;
• cavities filled with resin- it will have to be pumped out, otherwise the board will be fragile.

Ideally, the wood should be of a uniform color, without admixture of shades, without large knots, without spots, without minor defects. Then it can be used for a house without fear.

What are wooden houses?

Children's houses can be very different from each other - several different categories can be distinguished at once.

The first - by number of storeys:

• single tier. It is easier to make such a design, since there is no need to calculate whether the pillars will withstand the second tier, whether it will be dangerous for the child to be on it. But they usually look less impressive, you can’t attach a slide to them, you can’t satisfy the endless love of children for lasagna. However, if you approach the design correctly, the result can still be worthy of attention.
• Bunk. Such houses look more interesting, plus you can attach a slide, ladder or even a rope to them, along which the kids can go down. They require accuracy, accuracy - if you don’t calculate, the pillars simply won’t withstand, the second tier will collapse, and it’s good if no one is on it at that moment.

You can, of course, show creativity and build a three-story house for children, but usually such an idea is abandoned - it is costly in terms of materials, labor, and it is more difficult to calculate.

The second is by design:

• open. These are, in fact, small gazebos that are relevant in the southern regions, where in the summer, indoors, children will suffer too much from the heat. They are made either in the form of a hut, or in the form of columns that support the roof, and they themselves are connected by a wooden lattice. As a result, there is a shelter, but it is cozy and cool. And if you want privacy, the child can always hang a cloth between the posts.
• semi-open. Such houses have one or two walls, and the rest are posts with bars, like in a gazebo. On the one hand, they are not too stuffy, on the other hand, the child will not suffer from the rain if he goes, and it is more convenient for him to hide from the sun.
• Closed. If you make two windows and keep them open, it will even be possible to be inside in the heat - especially if you place the house under the trees, in the shade. Most of the structures belong to this variety - castles, huts, ships, houses in a certain style.

Third - by placement:

• Outdoors. In the courtyard of a private house or in the country, so that the child can spend more time outside - this is good for health.
• Inside. Usually in an apartment, for those who do not have a summer house or a private house. Such a house cannot be two-tiered, does not require laying the foundation, but can become an excellent playground.

Fourth - for mobility:

• mobile. These are structures that can be assembled and moved to another place if desired. Usually these include plastic houses, but huts on wooden slats can also be easily rearranged.
• Stationary. They stand in one place for several years - most of the wooden structures refer specifically to them.

What will be the house that you build depends solely on your imagination and the tastes of the child.

Advice

If you are going to build a structure in a country house where you spend only weekends, a mobile open house is better for you, which you can assemble and put away while you are away. And if you live in a private house, then it makes more sense to make a stationary one - a child can play in it even in winter.

How to build a house?

You need to approach the construction carefully, without haste. There is no hurry, but how much effort you put in, how much time you spend on calculations, how well you choose the material depends on what quality the result will be.

Preliminary work

In order for the house to serve for a long time, you need to lay the foundation from the very beginning. There are rules for this:

• Without a drawing - nowhere. The finished drawing can be found on the Internet, or you can do it yourself. Imagine what your dream design looks like. What size should it be so that the child is comfortable, how to achieve this. The easiest way is to make a drawing of an ordinary wooden box - and that's what you can do to start. Then, once you understand the principle, you can do something more complex.
• Height. In order for the child to be comfortable, the design must be thirty centimeters higher than his height so that he can stand up. In fact, this rule is inaccurate - children grow quickly, ceilings will soon interfere. Therefore, it is better to take a universal height of sixty meters - although if you suspect that a teenager will not get tired of the house, then you can take two.

• Width with length. The area near the house should be such that the child can turn around normally in it. Usually it is one and a half by one and a half - in such an area you can seat toys, put a table, turn around with board games. But less is possible.
• Accommodation. The right place for the house is in the shade, but not too close to the trees, otherwise they may start to hurt it. It is also desirable that you feel comfortable looking after the playing children from anywhere in the house and garden, and that no large-scale changes are planned in its place.
• Foundation site. Must be clean and even. If this is not in the garden, you can make it yourself by removing the top layer of soil, leveling it with the same shovel.

And, of course, you need to stock up on materials.

For the simplest hut, this is:

• several (from five) rails of the same length;
• strong twine;
• fabric measuring about two by one and a half meters plus nails.

For a single-tier design, you will, of course, need more:

You will also need nails, screws, mounting brackets along with tools with which they can be fixed.

And the rest - only accuracy, along with readiness, if anything, to redo.

Direct construction

To make a hut - and they haven’t come up with anything easier yet - it doesn’t take so much effort:

• slats are dug into the ground in a circle with a radius of about a meter;
• the ends of the slats are tied together with twine;
• the fabric is attached from above - first to one rail with the help of nails, then to the next, and so on until two adjacent rails remain.

It is somewhat more difficult with a real single-tier structure - it will not work to build it in half an hour. Although you also need to act consistently:

• fold the base bars into a square, fasten them with corners, plus attach a separate bar in the middle with them;
• dig four recesses under the foundation blocks in the chosen place and lay them;
• put a frame on top, sheathe it with boards to make a floor;
• attach wall beams to the frame - four at the corners, two each where there will be windows and doors, one on the remaining free wall, fix the frame from above, similar to the foundation;
• make rafters - connect two bars each with special corners at an acute angle, attach them to the wall frame;
• sheathe everything with shield sheets - from the walls to the roof;
• hang a pre-prepared door and windows.

Of course, in the details, the process is much more complicated, but its main stages look exactly like this. The result is a simple house that needs to be furnished to make it look good.

Decor

The design of the children's house must be approached with imagination. It should be bright, interesting even in appearance, but at the same time not devoid of taste.

Ready Ideas

Of course, it is not necessary to take what someone has already come up with before you. But you can always use other people's ideas for inspiration. So, a children's wooden house can look very different.

The first solution is like a fairy tale hut.

• External design. The walls are finished in such a way that they seem to be made of logs (you can use imitation for this). The door is squat, also made of logs, but vertical. The roof is gabled, with a carved visor and a platband in the form of a cockerel. The shutters are carved, if desired, they can be closed. Colors - natural wood, bright red, bright yellow.
• Interior decoration. The walls are made of the same logs, the floor is wooden, on it is a homespun (at least in appearance) carpet - it is convenient for children to play on it softly. In the corner there is a little whitewashed brick stove, in which, of course, you can’t really bake anything, but you can perfectly play the same Kolobok.
• Interior design. At the walls of the bench - they sit on them. In the middle is a table - you can put board games, a designer, sandwiches brought from a big house on it. There is a traditional chest in the corner, there are toys in it, and a lock can be hung on the lid. Hang bundles of herbs, beads, dried flowers under the ceiling. A Russian rag or straw doll will look good.

Of course, children will quickly turn a thoughtful design into something of their own - they will play with a doll, they will spill something on the table, they will fill up the carpet with toys - but the general atmosphere will still be traced.

The second is the gazebo of the Sultan.

• External design. There are no walls - instead of them there are four pillars, a woven wooden mesh that looks intricate, interesting (instead of a wooden one, you can take a metal one). The roof is pointed, if skill is enough - in the form of an elegant onion. Arch door instead. It will be beautiful if grapes or another similar plant weaves along the grid. Colors - wood, red, blue, white, gold.
• Interior decoration. The floor is wooden, no carpet. A fabric is fixed under the ceiling - if it is hot or you want to hide, it can be stretched by closing the grid.
• Interior design. Lots of colorful pillows on the floor, a low table that not only plays with the entourage, but is also comfortable for children. An intricate iron candlestick with a real candle - of course, light only in the presence of adults. A dream catcher or wind chime hangs from the ceiling.

If children do not have allergies, you can put a stand for incense sticks - in the fresh air, their smell will not be suffocating, but pleasant.

The third is a pirate ship.

• External design. The walls repeat the shape of a pirate ship, instead of a roof, in fact, a deck. You can make an ordinary door, or you can make a round hatch in the roof, like on a real ship. Then the child will need to climb the rope ladder to the deck and go down through the hatch. Such exercises are useful for coordination, but if the child is clumsy, it is better to refuse them.
• Interior decoration. The floor is made of wood, the walls too, round portholes are not curtained with anything. On the walls there are benches or hammocks where you can lie down, read, swing. You can put a table, but you can do without it.
• Interior design. Necessarily - accessories of the marine theme. Encyclopedia with ships. Rope on which you can learn to knit knots. A compass that can be used to determine directions. You can even give everyone who goes to the ship an eye patch to make it more convenient to play pirates.

The fourth is a European-style house.

• External design. Paint the walls, make the door framed, beautiful. The windows are simple, with rectangular shutters. In front of the entrance, you can set up flower beds that children can care for if they want. The colors are pastel, with bright accents on the roof and doors.
• Interior decoration. Paste the walls with simple wallpaper, leave the floor wooden, whitewash the ceiling. You can put a carpet to make it more comfortable.
• Interior design. Necessarily a vase with flowers, a small sofa of the children's size. You can make an imitation of a fireplace, you can put a bookcase. Plush toys, a table with a set for tea drinking. Nothing fancy, nothing flashy.

This decision is suitable only for calm introverted children - this should be taken into account. It’s not interesting to play active games in such a house, but it’s quite enough to play something economic.

Advice

When building a house, be sure to use the help of a child. Discuss with him what he wants to see. Invite to participate in the creation of a sketch. Even if the baby is only four years old, it will be he who will use the result, which means that his opinion is also important.

Additional nuances

To make the house look even better, you can use tricks:

• Make a separate path for it. You can lay it out with stone, tile or wooden dice - depending on how it looks in general. So, for a Russian hut, mossy stones are suitable, scattered so that you need to step widely from one to the other. But for oriental motifs you need a beautiful tile.
• plant flower beds. Not all children like to mess around with flowers, but if yours does, it’s quite possible to give him a plot near the house so that he can plant whatever he wants on it.
• Use not only simple varnish with paint. You can paint the walls with interesting designs (for example, your favorite cartoon characters), you can draw beautiful patterns, or you can decorate them with intricate carvings. Even a stained-glass window instead of ordinary glass in the window will look beautiful.

And this slanting and flimsy hut seemed the height of perfection and the best refuge in the world. But having matured, almost all parents think about arranging a strong, comfortable, and most importantly, reliable house for their child, especially if they have a country house or a summer house. And to build it is quite easy, you just need to get building materials, think about the design and be patient.

Now there are various ready-made plastic houses for sale, but the most popular were and remain children's wooden houses that you can make with your own hands, taking into account the wishes of the baby and with his feasible help. A jointly built building will become a real refuge for a child, a place for games, dreams, or just a quiet cozy corner to hide, sit, think or even cry. After all, everyone needs their own space, and children are no exception.

Do-it-yourself playhouses are not only more interesting, original and affordable, but also carry a piece of love and care from parents, so a child in such a shelter will be especially cozy and comfortable. And if the baby also puts his hand to the manufacture of the building, then his joy will have no boundaries. You can create playhouses for children from improvised means, as a rule, these are plywood, chipboard sheets or boards, and bright colors will help to color natural tones.

Before building a children's wooden house, it is necessary to initially think over the future structure, paying attention to such features:

• open or closed view of the house;
• height and area;

Drawing of a plywood children's house

• materials needed for construction;
• placement - the house should be located in a dry and sunny area of ​​\u200b\u200bthe garden, courtyard or cottage, within sight, in addition, you need to consider whether the building will touch the ground, since the manufacture of a ground or elevated building is significantly different;
• number of windows and doors, their dimensions;
• addition of a house with decorative elements, slides, awnings, fences, swings, ladders or sandboxes, as in the photo;
• type of interior decoration.

In the course of these reflections, it is better to draw up approximate drawings in which all the wishes of the parents and the child himself will be noted. When developing a construction plan, it is necessary to take into account that:

• the house must have at least 2 windows so that adults can see the children playing;
• the lower border of the windows for convenience should be at a height of about 50-60 centimeters from the floor of the house;
• doors need to be equipped at least 25-30 centimeters higher than the height of the baby, but it is better to make them with a margin so that, if desired, adults can also visit the child;
• it is better to make external and internal walls smooth and safe so as not to injure children during the game;
• it is better to make the roof steep so that the child does not want to climb on it.

Drawings can be developed independently, relying only on your desires and capabilities, or you can go the simpler way and use the drawings that have already been developed, verified and tested in practice, which can be found on the Internet.

Consider the main types of children's houses and the features of their construction:

1. Plywood children's playhouses

This option is most quickly built in a garden or cottage yard, and facades can be decorated with bright colors to protect plywood sheets from precipitation and winds, as in the photo. For the manufacture of a plywood house, according to ready-made drawings, the contours of walls, windows and doorways are applied to the surface of the sheets. The plywood sheets themselves need to be about 10mm thick to last long enough. For this type of houses, you can make a light foundation or do without it at all. For strength, it is necessary to dig support beams into the ground at the corners, having previously processed the wood from decay.

Choosing the type of plywood house

Next, they begin to manufacture wall panels, for this, a frame is knocked down from a wooden beam with a section thickness of 5 by 5 cm using nails or screws, to which the plywood cut according to the drawing is nailed. This is how all walls are made, which are firmly nailed to the support beams. The roof can also be made of plywood, and for strength, it is advised to overlap roofing boards on top. All corners and edges for safety must be polished with sandpaper - and you can decorate the house with multi-colored paints. But you need to remember that all varnishes and dyes must be extremely safe, because in this house the child will spend a lot of time and constantly inhale the evaporated substances.

1. Children's wooden houses from solid boards

A house made of solid high-quality boards will last much longer than its plywood counterpart, because a well-treated tree can retain its shape for centuries. Therefore, such a children's house will serve not only children, but also grandchildren, and even great-grandchildren. Yes, and a similar house looks very beautiful and elegant on the territory of a country house or cottage (as in the photo) - why not choose this particular option for a children's shelter.

Consider a simple version of a children's house for giving from wooden boards with your own hands. Like any building, wooden playhouses need a quality support. The foundation for the building can be made of wood, eliminating the long and painstaking pouring of concrete. But to increase the service life, it is better to dig a hole about a meter deep at the site of the future building and lay out the foundations of brick. Also, a brick can be replaced with a decking board, but its cost will be significantly higher. The simplest and fastest foundation is a few brick columns and a timber strap attached to them. The drawings will help you get acquainted with the features of such a foundation.

Construction of the dlma frame

After creating the base, you can start making the floor, for this you need good floorboards. First, lags are fixed to the harness, which are covered with boards tightly fitted one to the other. To save money, you can get by with OSB or a double layer of plywood, as in the photo.

Next comes the turn of the walls. For their construction, it is necessary to dig support beams into the ground in the corners and in the places of future placement of windows and doors, having previously treated the wood with protective equipment. Next, the walls are sewn up with boards. The roof is made of timber, the construction technology is similar to the previous version of the plywood house.

After finishing work on the manufacture of the roof, you can proceed to the interior decoration. Wood must be protected from moisture and pests by covering it with special means, and then with varnish or stain. For convenience, inside the building you need to equip tables, benches of suitable sizes for the child. Below are drawings of a similar wooden house.

Video of the construction of a children's house in the country

An interesting variant of the children's house is a hut on chicken legs, as from a fairy tale about Baba Yaga. A feature of the construction of such a structure with your own hands is the presence of high supports, which can be made of bricks, thick wooden logs or thick steel pipes. The height of the support should be no more than 70 centimeters for the safety of children. The supports must be strong and well dug into the soil, creating a reliable foundation for the children's house. Features of such a building are visible in the photo.

Further, a wooden beam is attached to the base, which will serve as the frame of the house. Strong floorboards are laid end-to-end on a square frame - and the flooring is ready. Then you can proceed with the installation of the walls, which is carried out by analogy with plywood and wooden houses - first they make a wooden frame from a bar, and then sheathe it with plywood sheets or boards. The base of the roof is made of timber, on which metal tiles, slate, plywood or laminate are laid.

Since the house is raised above the ground, the entrance to it must be equipped with a strong wooden ladder, for safety it is better to supplement it with good high railings, as in the photo. Such an unusual and fabulous structure will bring an amazing magical flavor to the design of the cottage.

1. Tree house

Older children will be delighted with the shelter built on the branches of a tree, because climbing into it is an adventure in itself. It is also quite simple to make it with your own hands, you just need to find a tall tree of strong species (oak is most suitable) with a lower branches height of about 7 m, a crown base height of 5 m and a trunk diameter of at least a meter. After choosing a tree, you need to carefully consider the drawings in accordance with the individual arrangement of the branches. Often, such houses are made of boards, have different configurations, and the entrance to them is provided with the help of ladders or rope ladders, an example can be seen in the photo. Such a structure will become not only a reliable refuge for the child, but also an extraordinary decoration of the dacha.

Construction of the walls of the house

Children's wooden playhouses have such a beautiful and varied design that they will not only become a favorite place for games and pastime of any child, but also perfectly decorate the garden or yard of any cottage.

Making a plywood house

For small children, you can make a light and simple house with your own hands, using ready-made drawings, as in the photo.

For a square building with a wall length of 1.7 meters, you will need:

• Chipboard, 4 sheets with a size of 2 by 1.7 m;
• timber 2.5 by 2.5 cm, 35 centimeters long, 8 pieces;
• timber 2.5 by 2.5 cm. 2.5 meters long for the manufacture of walls, 13 pieces, 8 of them need to be cut from above to the corner;
• boards 5 by 15 cm 2 meters long to strengthen the floor, 4 pieces;
• boards with a section of 15 by 5 cm, 2 meters long for the manufacture of the floor surface, 13 pieces;
• nails, self-tapping screws, metal corners, hacksaw, hammer and other woodworking tools.

When all the materials are ready, you can start building a house with your own hands.

First, with the help of a rope and stakes, you need to measure the area 2 by 2 meters, carefully level it, clean it of stones and debris, and compact it. Further, at the corners of the square, you need to dig holes with a diameter of about 20 centimeters, into which you firmly dig in the corner supports so that 15 cm of the beam remains on the surface. In the same way, additional supports are dug in in the middle of each side. Further, using the level, the places for attaching the floor boards are determined, here you need to be careful to avoid distortions. These 4 boards are nailed to the support bars in the form of a box, which then needs to be hammered on top with floor boards - and the flooring is ready.

Finished wooden house

Then you can proceed to the construction of walls, for this a chipboard sheet and two pointed bars of 2.5 meters are taken, they are nailed to the long sides of the sheet so that the even edge is flush with the sheet, and the pointed one protrudes. All four walls are done in this way, but windows should be cut in two, and a doorway in the third. After that, the resulting walls are hammered into the ground right next to the wooden box and interconnected using corners and screws to avoid cracks.

When the walls are ready, you can safely begin the construction of the roof. To do this, you need to take two beams and cut out their corners at an angle of 45 degrees, if desired, the roof angle can be increased and a small sloping roof can be made. Two beams should be fastened together with a metal corner and screws. The second triangle for the roof is made in the same way. After that, the triangle should be attached to the front wall of the building and mark the corners on the beam in which the roof will be attached, they need to be cut with a hacksaw. Do the same with the opposite wall. Further, the triangles are interconnected using a transverse beam and attached to the building using corners and screws. To cover the roof, metal tiles, laminate, slate or even plywood are suitable - everything that is in the household or is most liked. Features of the construction of the roof are shown in the photo.

It remains only to paint the plywood with paints of your choice - and the house is ready. As you can see, making a children's house out of plywood with your own hands on the territory of a garden or a summer house is a simple and short-lived business.

From the point of view of psychologists, every person and especially children need their own territory. It is not for nothing that they have a craving for the construction of huts, halabuds, bases and other buildings from any suitable and not very materials. If you have your own yard or a child spends a lot of time in the country, build him a children's house. The easiest way is using frame technology. Examples of building wooden playhouses for summer cottages in photo reports.

Playhouse for a summer residence with a sandbox below

We bring the brought timber 100 * 100 mm to smoothness. You can use a planer, you can use a drill with a fixed skin. First with large grains, then with small grains. After we process from decay with a protective compound, we paint. While the pillars are drying, we drill holes (we have a diameter of 23 cm, a depth of 60 cm). In them we fall asleep to the bottom near a shovel of rubble. We put the pillars, set them vertically, fill them with rubble, compact, concrete.

We cut the exposed pillars all in one level. From above we fix the same bar 100 * 100 mm. It is also carefully processed: so that there are no splinters. We connect in half a tree: at the ends we cut out notches in half the thickness of the timber. For a 100 * 100 mm beam, cutouts 50 mm deep and 100-100 mm in area: so that the sawn edge of the other beam lies exactly in the same way.

We fix the top beam. Three collected, while the fourth lies.

We fasten securely: on top of 2 long nails (200 mm), on the sides of the corners on self-tapping screws.

We attach an additional beam along the long side. Under it in the middle - above the rack - we cut a notch also for half the thickness of the beam - 50 mm. No more need for wood to burst. We cut the stacked timber at the ends in the same way as those that go around the perimeter: in half a tree. It fits into the prepared gash.

The children's house should have a solid margin of safety. Therefore, we reinsure ourselves in each connection. To give the structure stability under lateral loads, we put jibs. We cut them from a bar 50 * 50 mm, cut the ends at 45 °.

We set by surprise, pressing well.

After installing the jibs, we lay the board. This will be the floor of the house.

Without an assistant - no way

We cut the flooring from the boards. It is more convenient to work with a jigsaw, but you can also use a hacksaw.

On the finished flooring, we assemble the frame of the children's playhouse. We use a bar 50 * 50 mm. We set the bars strictly vertically, first we fasten them with nails - two on both sides, then we strengthen them with corners on self-tapping screws (also on both sides).

We increase the rigidity of the structure by installing jibs. Then we nail the strapping of the second floor. These bars are simply nailed between the posts. They must be sawn off with great precision so that the building does not warp. We strengthen the joints with corners, after we put the jibs.

In the place where the entrance of the jib will be, we do not nail it.

Sheathed with a board left over from the packaging of equipment. You can use it from pallets, buy an inch board (12-13 mm thick), sheathe it with clapboard or imitation timber, logs, siding.

When the sheathing is almost finished, we begin to assemble the truss system. It’s easier, of course, to make a shed roof - make one wall higher and no problems. But the gable looks better, although it is more difficult to perform.

For the rafter system, we put two boards per edge, connect them at the top, sawing off the corners. The ascent depends on the desire and amount of snow. If there is a lot of snow, raise the skate higher. If not, maybe about a meter or less. We knock down with nails, then we strengthen the connection with overhead plates.

During the construction of houses, either a metal plate or a piece of board is placed here. We decided to use the board.

According to the finished sample, we mark other rafters. We cut it out, knock it down under two rafter legs at an angle (everyone should be the same as a carbon paper). Having installed on top of the house, we check the verticality. Then we nail with two nails on both sides and put the corners.

Now the battens are laid on the rafters. The roofing material will be ondulin. We put the board 11 * 100 mm in increments of 30 cm.

Based on the thickness of the board (11 mm), we take self-tapping screws 25 mm long for fastening the ondulin (so that they fit well into the board. We put rubber gaskets under the caps so that they don’t leak.

Handrail from the processed, sanded board. Screwed on powerful self-tapping screws 90 mm. Two in the lower beam - one in the sheathing board.

Railings are installed on the "veranda" of the house

At the top, the railings are connected with a beam of 30 * 30 mm. Then a board will be nailed to it - a handrail.

Railing ready for painting

At the bottom it was decided to put a sandbox. It is not difficult to assemble: eight boards on the walls, connected at the corners with the help of bars, A side board is nailed on top. Then the sandbox is painted.

Even a "non-builder" can build such a children's house with their own hands. There are no particularly difficult jobs, you can get by with an elementary tool.

Several options from the same series in the photo below. Two - houses with a slide, and one one-story option, more suitable for girls.

One-story "open" option

How to make a children's house from OSB and plywood (frame technology)

It was decided to make a house using frame technology - the base is made of boards, sheathing is made of OSB. Dimensions in plan - 3 * 2 m, wall height 1.5 m, in the ridge 2.2 m. Boards 50 * 100 mm were purchased for the frame, an inch board (100 * 12 mm) for the subfloor, OSB 9 mm for the floor and outer skin , for the inside - sanded FSF plywood 6 mm, foam for insulation 100 mm thick.

Preparatory work - the assembly of shields for the children's house - was carried out in the garage: it was still cold. Later, as it gets warmer, the house will move to the dacha, to the place of permanent registration.

The first stage is the manufacture of the floor frame. We knock down a rectangle with sides of 3 * 2 m, nail the transverse boards (floor logs) in increments of 50 cm.

The floor will be insulated with foam. Children love to sit on the floor, so we insulate well - with 100 mm foam. Under it, from the bottom side, we fill thin strips - so as not to fall through. Insert foam. Slots can be filled with mounting foam.

It's good that the building is small. We put it on its side and hem it with an inch board from below. This will be the subfloor. After turning over, we sew up the OSB.

Later, when the house was taken to the dacha, an OSB installation error was revealed. He was nailed close. In humid air, the material swelled and the sheets bulged in some places. Therefore, when installing sheet material, leave a gap of 8-10 mm.

Next, we assemble the frame of the walls. We put racks in increments of 1 meter, under windows and doors - doubled. Since the top will be stuffed with OSB on one side, and plywood on the other, the structure will be rigid. We don't put jibs. They are needed if there is a children's house upholstered with clapboard or other slatted material.

Wall frame assembly

The work has been moved to the country. Three old logs were used as a foundation. They are hewn, the tops are aligned. The logs are set to the level, a board is nailed to them, on which the platform will be installed. The width of the house is 2 meters, and the logs are 3 meters long. We will decorate the rest as a terrace or porch.

The platform has been set up. It is attached to the logs with large studs that connect the log and the platform. Began to expose the frame of the walls. They must be placed exactly vertically. To fix, they used temporary cuts - they nailed them with boards on the side.

Attached to the outside (connection brackets visible in this photo)

Along the way, having exposed and checked whether the wall is level, we nail it to the platform with long nails. The length of the nail is such that it at least reaches the middle of the frame board.

Then the fittings begin: you need to correctly cut the corners under the rafter legs so that they lie flat on the boards. First, cut out approximately, gradually ensuring that there are no gaps.

Trying to "create" a rafter leg

When the shape of the cuts is clear, we transfer it to other boards with a sharpened pencil. We cut everything evenly (with a jigsaw, if any, or with a hand saw). Then we nail all the boards to the frame. Between the rafters we fill the transverse boards - ondulin will rest on them. It turns out such a house.

After the construction of the truss system, only the sheathing remains - inside and out. Outside we stuff OSB. We cut it so that the joints fall on the racks. We nail, you can use wood screws. Who is more comfortable.

Insulation of the house inside - mineral (basalt wool)

From above everything is nailed with plywood. And that's it. The job is done - paint and can be put into operation)))

Using the same technology, you can build a tree house. It will be necessary to fix the site, and everything else is very similar.

Drawings and diagrams

Each homemade children's house is different in size. Proceed from how many "inhabitants" are planned in it. If the child will play alone, then 1.5 * 1.5 m is more than enough. If there are two children, large sizes are already needed. At least 2 * 2 m. In terms of height, also decide for yourself. But less than 1.5 m is better not to do.

House made of boards and plywood with a slide roof

Children spend all their free time outdoors. Fresh air gives them strength, health, joyful and positive emotions. In order for the child to spend as much time as possible in the air, it is necessary to make a children's wooden house for him. It will definitely become a favorite place in which the child can hide and equip his own world.

The joint construction of the building will allow you to spend time with your child fun and provocatively. This activity will bring a lot of positive and unforgettable impressions to any boy or girl.

To date, the stores offer a wide selection of summer houses for children, but not every person can afford to buy it. Creating a design with your own hands according to an individual sketch that the child came up with will be the best solution.

Important: before you start building a structure, you should take into account all the wishes of your own child.

It is necessary to decorate the hut in bright colors. On the building you can draw your favorite characters from fairy tales and cartoons. The child should also be involved in this process, with the help of which he can show his talents and abilities. The house, which is made by the hands of a child, will become especially valuable for him.

What wooden house can be built for a child

The children's lodge is made of various materials which are available to each person. If building materials remain after the construction of the house, then you can, in general, not buy anything. You can make children's wooden houses from chipboard, fiberboard, beams, plywood and any other wood materials.

Plywood playhouse for a child

Before you start building, you need to create a drawing, layout or sketch. This will allow you to evaluate the structure, determine where to place the door and windows. It is desirable to arrange it so that it can be seen by parents, so the child will always be in sight.

The best places where a child can retire and dream are wooden children's houses, photos of which are presented here.

To create a plywood summer hut, you will need 2-3 sheets of material. The amount of plywood used depends on the size and size of the structure. The material can be used in any thickness. In the store, it is sold with a thickness of 8-12 mm. Windows should be located 60 cm from the floor, and the doorway should be 30 cm higher than the height of the children. But do not forget about the size of the door, since an adult, if necessary, should get into it freely.

The building must be large so that it is spacious and roomy. The roof is installed at a 45-degree angle. Sheets of plywood are knocked together with nails, then window and door openings are cut out. The top is made from the same material as the walls. When the structure is erected, it is necessary to polish it with sandpaper or a special grinder. This will avoid splinters and skin damage.

The next step is decorating and installing furniture.

Attention: the painting of the structure must be carried out with enamels and varnishes that are safe for the child.

It is desirable to decorate the hut at the request of the child. Colors should be chosen bright, colorful, saturated. For a girl, the design can be painted in a bright pink color, as in the presented photo.

Children's house for a child from wooden boards

The structure of wooden boards is practically not subject to wear. Therefore, several generations of children will play in the built hut. At first, a son or daughter will be in charge of it, and after a while - a grandson or granddaughter. For a large family, it is important to build a large temporary hut so that all the guys intervene in it. A video instruction for building a structure from boards can be viewed below.

To build the frame of the building, you will need bars with a cross section of 5 cm. A children's designer - a wooden house will turn out to be strong and durable if its surfaces are treated with deck varnish. For windows and doors, special inserts are made, which are placed in a vertical position. The constructed frame to enhance strength is upholstered with thinner wooden planks, the thickness of which should be more than 2 cm.

The roof structure is made of timber of the same section. It should be installed on already finished walls. Thin boards from 2 cm are stuffed onto the roof.

Warning: To prevent the roof from leaking, the roof must be reinforced with waterproofing.

A plastic cap can be installed over the waterproofing material. After completion of construction, the structure is painted in a pre-selected range of colors and covered with deck varnish. The photo shows a children's facility for boys.

Hut on legs for a child

An interesting house - a hut on legs will help you find yourself in a fairy-tale land. Fairy house can be of various sizes, shapes, colors. The photo shows one of the interesting, creative designs of a children's playhouse.

To build a hut, the legs can be made of wooden blocks, metal pipes, stones, and other decorative materials can also be used.

Important: The house is intended primarily for children, so do not make the legs too high.

The height of the legs should not exceed 70 cm. In this case, it is necessary to install a small ladder or several steps. If the legs are created from pipes, then the pillars should be dug into the ground 1/3 of the pipe. The base of the legs must be fixed. For example, pour concrete.

A bar of wood is hammered onto the upper part of each pipe, to which the base of the hut is attached. The foundation can be made from boards with a cross section of about 4 cm. Then a structure is built from boards. The resulting frame is sheathed with thin boards, after which the roof is erected. The roof is made from the same materials as the entire structure.

The entrance to the hut on legs is equipped with a comfortable staircase with railings. The railing should be approximately 50 to 70 cm high. Their height is determined by the age and height of the child. The steps should be at least 20 cm so that it is convenient to climb them, and the legs fit completely into them.

A children's wooden house for giving can be supplemented with an original sandbox, horizontal bars for physical exercises, a game complex of game and sports equipment. All elements must be painted in bright colors. Nearby you can break a flower garden or flower bed. The child will look after her and develop her talents and abilities.

Dollhouse for a child

The dream of any child is a beautiful, roomy house for his toys and dolls. Small children love to play with toys, scattering them in every corner. A do-it-yourself dollhouse solves this problem once and for all.

A huge house for dolls the size of a closet can be built by any parent. To do this, you need to show a little imagination and skill. Children's wooden dollhouse can be made from chipboard or any other similar materials. To create a structure, you will need a jigsaw, glue, chipboard sheets. Anyone can build it, as the design is so easy that even a child can handle it.

Important: a wooden dollhouse must be made from materials that are safe for the child.

The box is very easy to assemble. On the walls, you can cut out small windows and glaze them with thin transparent glass, thick, multi-colored film, or use plastic bottles. Using a flashlight, you can electrify the structure. You can decorate the doll house with drawings, thin boards, stickers, laces, ribbons. In order to make a unique house, you just need to show imagination.

DIY dollhouse

Before starting the construction, it is necessary to draw a plan or sketch of the future structure, as well as consider where the windows, doors and stairs will be located. It is necessary to take into account the smallest details and the wishes of your own child.

To create a multi-storey closet for toys and dolls, you cannot do without a detailed drawing. It is easier to redo the drawing, in case of changes, than to disassemble the constructed structure.

Important: The size of the house must match the height of the dolls and the dimensions of the toy furniture.

The house must have windows, doorways, stairs, bathroom, light. When wiring a house, it is necessary to consider the insulation of all cables so that they do not pose a danger.

Warning: Do not use lamps that get hot.

If electrical installation work is difficult, then you can do without lighting. Wooden children's houses for dolls decorated with colored paper, wallpaper, pieces of multi-colored fabrics. Maximum realism can be achieved with the help of curtains on the windows, paintings on the walls, rugs. Surround the finished building should be a fence, as well as build a garage, veranda, swimming pool.

After the completion of construction work, it is important to make sure that screws, nails and other sharp elements do not stick out of it. And then the wooden structure for dolls will become a favorite toy for the child.